Reformatting MacBook Pro (early 2011)

Hi guys, I need help by reformatting my MacBook Pro (early 2011)
I want to reformat it, because the last months it became really slow. I've installed and maybe not correctly uninstalled lots of applications and stuff like this... I just wannt to clean it out, delete all whats on it.
When i bought my MBP it came with OS X Snow Leopard and iLife 11... but NO discs. Afterwards i purchased OS X Lion in the App Store (NO disc). I've checked now on my App Store, and under purchased Apps nothing appears.
After refomratting it, if i am not wrong, OS X SL will be installed, and iLife will be deleted.
But I want the clean MBP with my OS X Lion and my iLife 11 on it. How do i do this? None of them are shown in my App Store under "purchased".
Thanks in advance!
Christian

That is Completely incorrect. Every Mac computer that came with Snow Leopard or any other earlier version of OS X came with 2 system discs. One is the OS and the other is the iLife Appications disc. If you bought your Mac New then They Were In The Box the computer came in.
If you don't have them, like you didn't know they were in the box and you threw that box out, you can order a replacement set from Apple.
But if you had Lion installed then on the internal drive is the Recovery HD partition. At starup hold down the Command+r keys and that will boot you to the Recovery HD partition and from there you can Erase the Macintosh HD partition and Re-Install Lion. you will need the Apple ID and password that was used to buy Lion originally. It will ask for both of those to start the download of Lion.
1_orange wrote:
Thanks for the fast reply.
Since the 2011 Apple doesn't send any dsiks by purchasing a MBP, so I don't have any iLife disk. So theres no other way to stay with my old iLife apps?
The thing with lion, you say, I can see in Recovery HD if it would reinstall 10.7 before starting or earasing anything?

Similar Messages

Macbook pro (early 2011) won't boot after sleep. Black screen with chime

I put my macbook pro early 2011 (Quad, 8 Gb RAM, 2 x SSD-disks, external 27" LED-screen) into sleep mode a couple of days ago. Everything was fine then.
However, the morning after it wouldn't wake up - this is the bootup process:
- Black screen
- Chime
- Still black screen, nothing happens.
So I've tried resetting NVRAM, SMC etc - no luck. Even tried the "Powerbutton" + "S" + Enter but to no avail.So I immediately began dd:ing my SSD-disk before trying anything else, figured it might be some preboot-corruption of some sort since I'm running FileVault2 with full AES-encryption.
Now, the problem (after some troubleshooting) doesn't seem to be disk-oriented. Remember the black screen? I've tried pulling the SATA-cables one by one on the motherboard of the Macbook pro and discovered that when I pulled the cable which reaches over the optical device (just above the SATA-cable for the optical device) then I get a white screen and I'm able to get as far as boot-option, or even disk repair (if I run my SSD-disk over USB and without any cables (three of them) attacked to the motherboard).
So since nothing works when I have disks connected or that third cable (some kind of logic board bridge? Reaches through the screen over to the other side of the mother board).
Also worth noting is that I was running out of free disk-space on my system disk. The disk is 250 Gb and free space was about 5-10 Gb (less than 5%). I also make the macbook pro dump contents of memory to disk (since my disk is encrypted it resides safely there).
So, my fear is that Apple hasn't used A-grade controllers for the disk drives (I've had drive corruption before, a Crucial 6 GB/s drive trashed less than a week before a presentation) and doesn't handle "unexpected events" nor signal/noise ratio very well. Maybe free space on disk was less than the 8 Gb needed to dump RAM (shouldn't have needed the full 8 Gb though) and this caused some kind of panic overwrite which trashed the controller?
Anyways, I've attached an image of the motherboard and I am wondering - what does the top cable which reaches over the optical drive do? Is it connected to the logic-board?

sspott wrote:
** The volume Macintosh HD could not be repaired.
Looks to me like a fatal error on the hard disk. IMHO, the only solution is to boot from an external device, reformat the hard drive, and restore from backup. If you don't have a backup, you're in trouble. Boot from the external device, try to mount the int'l drive, and, if successful, back up as much as possible. Also, try running Disk Utility—it may be possible to fix it while booted from a different device, thought I wouldn't bank on it. At any rate, make sure to run an AHT afterwards, to check for possible hardware issues with the drive.
If the machine is still covered by AppleCare, take it to the store by all means. But they won't try to recover anything from the int'l drive, just check it, erase it if they don't find hardware issues, and re-install a fresh copy of the OS.
That's why you should always have at least 1 up-to-date backup (2, with one kept off-site, is better).

EXACTLY what cable(s) do I need to connect my MacBook Pro (early 2011) to an external display with a 2560x1440 resolution?

I am trying to connect my MacBook Pro (early 2011 w/ Intel HD 3000/ 384Mb) to an external display with a 2560x1440 resolution. Specifically, what cable/connections do I need to display at this resolution? I cannot get the display to work using a "Thunderbolt to HDMI" or a "Thunderbolt to DVI" connector. Note: I used both older and newer (uni-directional) HDMI cables on the first config, and a Dual-link DVI cable on the second config. Apple specs state this is possible ( support.apple.com/kb/SP619 ), but I am at a loss as to how this can be done. Thanks in advance for the help!

You use a Mini DisplayPort to either HDMI or dual-link DVI adapter. If that component doesn't work, something's wrong with either the cable or something else in the connection.
(112855)

13" MacBook Pro (Early 2011) doesn't detect display over mini DisplayPort HDMI adapter in Mountain Lion 10.8.2

Hi to all.
I have a problem connecting external display (Dell U2311H) to my 13" MacBook Pro (Early 2011).
I use Tecklink Mini DasplayPort to HDMI adapter (http://www.techlink.uk.com/products/wires_cables/wiresmedia/wiresmedia_media/wir esmedia_mini_displayport_plug_to_hdmi_plug), but since U2311H doesn't have HDMI input, I also use Manhattan DisplayPort to HDMI Adapter (http://www.manhattan-products.com/en-US/products/8101-displayport-adapter).
And nothing.
The display is not detected, no picture or even external monitor presence at all.
I even reset PRAM, and installed 10.8.2 Supplementary update.
I also plugged and unplugged all I could, with no luck.
As I can see on Apple discussion, it is a common problem with 2011 MacBook Pro's.
It seems like the problem is in Thundebolt port, it somehow does not work properly.
If anyone has solved such ploblem, please let me know.

In reply to my own post have to say appologies to Apple whose Thunderbold port I used to blame.
Shame on me)
So, what was my problem?
Guess what?
Manhattan DisplayPort to HDMI Adapter !
The point is it's actually do only what it said to do, converts DP to HDMI.
But I for some reason thought it can be used vice versa, to be HDMI to DP converter))
I was wrong.
I bought new one HDMI to DVI adapter and now I HAVE external display!
Thunderbolt works like a charm.
So I'm very satisfied now.

MacBook Pro Early 2011 - Airplay Mirroring only sends audio to Apple TV 2nd Gen

Ok, I'm stumped by this one. I have a 15" MBP Early 2011 edition and an Apple TV 2nd Gen. Airplay Mirroring from my MBP to Apple TV only transmits the audio -- the MBP will resize the screen like it's connected to a 16:9 device, and Apple TV will show a black screen like it's about to pick up the video signal, but no video transmits. A couple of times, video started transmitting, but it was about 30 seconds delayed (?!) and extremely choppy. Both devices are connected wirelessly to a Linksys router with 5 GHz (wireless N) capabilities. The router has been configured to Apple's recommendations for Airplay Mirroring.
A little more about my MacBook Pro:
Early 2011 Model ID: MacBookPro8,2
OS: 10.8.2 Mountain Lion
CPU: Intel Core i7
Processor Speed:          2 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory: 4 GB
GPU: AMD Radeon HD 6490M, VRAM 256 MB Total
This problem is driving me crazy! Airplay works flawlessly between my iPhone 5 and Apple TV, but not with a much more powerful laptop. Also, I tried Mirroring from a friend's 13" MacBook Pro, and it did the same thing.
Any suggestions, tips, ideas, etc. to get this working is appreciated!

Rudegar wrote:
your macbook dont support airplay mirror
He has an Early-2011 MacBook Pro, which does meet the requirements. The issue is that it is running OS X 10.7.5 and needs to be upgraded to Mountain Lion to use mirroring.

Connecting my MacBook Pro (early 2011) to my Sony LCD TV (KDL-46XBR6) and listening to Multichannel surround sound.

Dear all,
I am attempting to connect my MacBook Pro (early 2011) to my Sony LCD TV (KDL-46XBR6) via the Mini DisplayPort to HDMI. I have successfully connected the two devices and can select "SONY TV XV" in the sound preference pane. I can see and hear what I'd like, however, I can only monitor the sound in 2 channel stereo. I have my TV connected to a Sony 7.1 audio receiver via an optical cable and can monitor 7.1 sound via other sources (Blu-ray, broadcast, etc). When I go into the Audio Midi Setup utility, I am unable to configure my speakers to be anything but 2 channel stereo. I am given the options for "2ch-16bit", "2ch-20bit", "2ch-24bit" and "Encoded Digital Audio". When I select "Encoded Digital Audio", my output automatically changes to Built-in Output. Has anyone been able to successfully resolve this issue? Thanks for all your help!
Gregg

You should also ask this in the MacBook Pro forum. This is the forum for the 13” white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/notebooks/macbook_pro

Connecting my MacBook Pro (early 2011) to my Sony LCD TV (KDL-46XBR6) via the Mini DisplayPort and listening to Multichannel surround sound.

Dear all,
I am attempting to connect my MacBook Pro (early 2011) to my Sony LCD TV (KDL-46XBR6) via the Mini DisplayPort to HDMI. I have successfully connected the two devices and can select "SONY TV XV" in the sound preference pane. I can see and hear what I'd like, however, I can only monitor the sound in 2 channel stereo. I have my TV connected to a Sony 7.1 audio receiver via an optical cable and can monitor 7.1 sound via other sources (Blu-ray, broadcast, etc). When I go into the Audio Midi Setup utility, I am unable to configure my speakers to be anything but 2 channel stereo. I am given the options for "2ch-16bit", "2ch-20bit", "2ch-24bit" and "Encoded Digital Audio". When I select "Encoded Digital Audio", my output automatically changes to Built-in Output. Has anyone been able to successfully resolve this issue? Thanks for all your help!
Gregg

I have tested it with the Moshi (http://store.apple.com/us/product/H1824ZM/A/moshi-mini-dp-to-hdmi-adapter-with-a udio-support) and Belkin (http://store.apple.com/us/product/HA342ZM/A/belkin-mini-displayport-to-hdmi-adap ter) adapters, both purchased from the Apple Store with no such luck. Have you or anyone else had success with any other third-party adapters?

Instant Hotspot not working on MacBook Pro Early 2011?

Hi and tnxs for reading.
I have a MacBook Pro Early 2011, and I cannot figure out how to use Instant Hotspot.
It is regularly working as standard hotspot by activating it on my iPhone and checking the iPhone WiFi Hotspot from WiFi menu, but otherwise is not available after the iPhone goes on stby...exactly as before.
Is this a limitation like the major part of Continuity?
Tnxs

not working for me either and i have iphone6 and macbook mid 2014 so it cant be a hardware problem for me at least....

HT5628 When i try to install windows 8 on my macbook pro (early 2011) it says that it only supports windows 7?

When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 8, how can i fix this?

bootcamp mean dual boot which mean a dual osx install
virtual machine is installing another operating system as an applications so to speak
http://en.wikipedia.org/wiki/Virtual_machine

When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

if your computer does not support the operating system you wish to install in bootcamp then you have to use a virtual machine like virtual box to install the operating system you wish to install

How large of a hard drive can i put in my Macbook Pro (early 2011)

how large of a hard drive can i put in my Macbook Pro (early 2011) and where can i get one?

You can find answers to both at OWC as well as installation tutorials. I think you will find 1 to 1.5 TBs are the largest.

I have a number of cds that have bonus videos attached on an audio cd. How do i play these videos on my Macbook pro, early 2011.

Hi:
I have a number of newer and older music cds that came with bonus dvds attached to the audio cd. How do i get the video to play on my macbook pro (early 2011) w/ Mountain Lion?
Thanks!
j.

Quicktime comes pre-installed on all Macs. Quicktime 10 should be on your Dock and the original application inside your Application folder. Quicktime 7 is inside your Utility folder. VLC is the application that you need to download.

Thunderbolt 2 external hard drive not working with Macbook Pro (early 2011)

Hi,
I'm new to this forum and I hope you guys can help me with this:
I've recently bought an external hard drive that works on Thunderbolt 2 (LaCie d2 3TB). When I connect the new drive to my Macbook Pro through the thunderbolt port, the drive isn't recognized. However, the drive works fine through a USB connection.
I thought that Thunderbolt and Thunderbolt 2 are compatible, however this doesn't seem to be the case. Maybe it's because the OS X / driver / firmware version that I'm working on that is not updated? I work on an early 2011 Macbook Pro: OS X Version 10.6.8 (Snow Leopard).
Thank you very much for your help!
Daniel

Hi danielsh6,
I recently bought the new Lacie Thunderbolt 2 D2 3TB and I had the same problem as you, i have a macbook pro early 2011, those support thunderbolt but many times there is a bug that doesn't let you connect any thunderbolt drives to your computer. The solution I found was installing this update:
Thunderbolt Firmware Update v1.0
Before doing this I would recommend you updating to mountain lion (not yosemite yet as there is still some glitches and more on preview's macbook pro's).
Hope this helped!
Forest

Windows 8 on Macbook Pro (early 2011)

Hi,
I want to install Windows 8 on my macbook pro (early 2011) running the new Mavericks 10.9, but im stucked at the formating process when installing windows 8.
So first I go into boot camp and partition my disk as it guides me to. When It has finished and rebooted I'll hold the alt-option to select the windows disc (efi-boot). When I choose the language, typed the activationcode and all that, it wants me to format the partition i made, and thats when I got stucked. When i try to format it, it says:
"Windows cannot be installed to this disk. The selected disk has an MBR partition table. On EFI systems, windows can only be installed to GTP disks.
Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu."
I downloaded my windows from dreamsparks microsoft, and im pretty sure it is the full version (not the upgrade). The file size is 3.6GB. I don't know if that can tell which version of windows it is.
I don't know what to do about this problem, I need help please!
Thanks

bootcamp mean dual boot which mean a dual osx install
virtual machine is installing another operating system as an applications so to speak
http://en.wikipedia.org/wiki/Virtual_machine

15in Macbook Pro early 2011 won't shutoff nor can I run disk utilities. Any suggestions?

Situation:
I have a 15in Macbook Pro early 2011 that I can not shutdown nor can I run disk utility to repair any issues. I recently had it serviced to replace a failing hard drive.
Known issues:
     - Disk Utility: Will not respond. A couple days ago I had to run it to repair some damage to harddrive. When I try to open it, it is frozen with the rainbow ball.
     - Shutdown: I can not shutdown or restart my computer as it freezes during shutdown with grey screen. I can manually turn it on and off by holding down the      power button.
     - Disc Drive: This may not be related but I can not eject DVD in the disc drive.
Any thoughts or advice would be greatly appreciated. I currently live overseas (for school) so just going to an Apple store is not really a realistic option for me at this time. Thanks

thetribes wrote:
Situation:
I recently had it serviced to replace a failing hard drive.
Take it back to where you had it serviced, there is usually a ~90 day guarantee
you can force a shutdown by holding the power button for longer than usual.

Reformatting MacBook Pro (early 2011)

Similar Messages

Maybe you are looking for