Reformatting PC, How to keep the checked files?

So this is my problem: I'm going to reformat my PC, and I want to keep my itunes library. I know that all I have to do is copy the "itunes" folder in my documents and the itunes will automatically recognize the files. However, i have plenty of unchecked musics, because I don't want them on my iphone, but everytime i reformat my PC, the boxes get all checked, and I have to go throw all the 2000 items and select the ones I want. Any solutions?

The Cisco Identity Services Engine (ISE) provides distributed deployment of runtime services with centralized configuration and management. Multiple nodes can be deployed together in a distributed fashion to support failover.
If you register a secondary Monitoring ISE node, it is recommended that you first back up the primary Monitoring ISE node and then restore the data to the new secondary Monitoring ISE node. This ensures that the history of the primary Monitoring ISE node is in sync with the new secondary node as new changes are replicated.
Please Check the below configuration guide for Secondary ISE- Nodes.
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.pdf

Similar Messages

Does Anybody know how to keep the license files and Certificates in ISE-3315 During the upgrade.

Hi,
I have two ISE-3315 Appliances in production network.
I need someone's help to explain, how to make the Secondary node as the primary admin note to reset-config.
And then I would like to know how to keep the license files and Certificate during the Upgrade.
Please help me to answer my questions.
Thanks
CSCO11872447

The Cisco Identity Services Engine (ISE) provides distributed deployment of runtime services with centralized configuration and management. Multiple nodes can be deployed together in a distributed fashion to support failover.
If you register a secondary Monitoring ISE node, it is recommended that you first back up the primary Monitoring ISE node and then restore the data to the new secondary Monitoring ISE node. This ensures that the history of the primary Monitoring ISE node is in sync with the new secondary node as new changes are replicated.
Please Check the below configuration guide for Secondary ISE- Nodes.
http://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_dis_deploy.pdf

Acrobat 5.0 How do I keep the original file name after I have converted a Word doc to PDF?

MY colleague has a certain setting in Acrobat that allows him to keep the original file name when he converts documents from Word to PDF. Every time I convert Word, Acrobat overwrites the filename and names it "untitled.pdf". I would like to retain the original name and for Acrobat to simply add the .pdf file extension to the original name. How do I do this?

I have no idea what you are doing for sure. Does your WORD document have a name. I opened a WORD document and selected the Acrobat Distiller printer for AA5, I got the file menu for selecting the name and it was automatically filled in with the DOC changed to PDF. If you are using PDF Maker, then you will need to search there - I removed PDF Maker for AA5 years ago and can't view that part. I see the same types of options in PDF Maker for AA8.1.2 as I saw in the printer for AA5 and guess it is the same. The untitled.pdf suggests that you never saved the original DOC file so it has a name.

How do I keep the same file size, going from tiff to jpg?

Going from tiff to jpg, how do I keep the same file size? Seems like I am not able to save the jpg´s in 16-bits... Thanks!

file size? you mean dimensions or file bytes ?
Jpg is compressed so it won't be the same
Tiff is losless / lossy format to get the better quality
as for 16bit jpg the format doesnt support it

Cheque printing error Restart number is not in the check file

Dear Sap friends,
I need to print the cheque using the standard program FBZ5. Since the client requires to change the description of vendor i am using FCH5 and manually creating the cheque for the payment document number.
After the cheque no is attached to this document number i go to FBZ5 and am entering this docuemnt number for printing the cheque.
Initially i am getting the error
You cannot print the manually created check AX002 AX002 500000
Message no. FS675.
This i have resovled by changing the message from error to warning.
Later when i press enter i am getting the following error.
Restart number is not in the check file or is not a From-number
Message no. FS562
How to i resolve this.
Please help.
Satish

Exactly,
If you really need such kind of facility, ask your ABAPER to develop a small report like below
Selection criteria
Document number - BELNR
Conmpany code - BUKRS
Fiscal year - GJAHR
Output criteria
Vendor name
Amount
Date
Form has to develop for Check prinitng
Thanks

How to get the XML file if we are using the Product short name.

Hi,
Till now I have used Short name of the Concurrent Program for Code while creating a Data Definition. Now saw a seeded template which has given the Code by Product short name. If we have the concurrent program then it is easy to refer the fields by checking the XML file. In this case how to find the XML file or how to refer all the fields if we have given code with Product short name. I saw this for iReceivables(ARI). Anybody please help me.
Thanks.

Hi Siva
Just to clarify, rather than the short name of the conc program there is a shipped data definition that just uses the product short name? What is the data def so I can check it.
Regards, Tim

How to keep a check box in script

hi
how to keep a check box in script

Hi,
go to sapscript editor
Change the editor to 'PC Editor' and take the menu.
Include -> Characters -> SAP Symbols
whether this will not be visible in the print preview.
other wise..
Just keep it like <697> in your text element.
Telephone <697> : &W_TAB-TEL&
Corresponding symbol will be printed in the paper.
Note: It will not be displayed in the print priveiw.
Regards,
Shiva k

How-to hide the portal file shares on Windows

Hi,
Does anybody know how to hide the default file shares created by SAP NW 04 in windows?
In other words: what I'm trying to accomplish is renaming the sapmnt share and saploc share (both on the E:\usr\sap\ folder) to sapmnt$ and saploc$.
I know how to do the Windows part, but where and how do I configure the SAP Web AS part?
Regards,
Steven Dijkman

Hi guys,
Thanks for all the feedback. However, this still does not fully work.
I tried hiding the folder but it in fact only hides the folder, not the share itself. I'm trying to do the opposite, hiding the share (making it an administrative one) whilst not hiding the folder. With the folder hidden, the startup framework (NW 04 EP6 SP12) does not work.
By the way: checking / tightening access is not an option: security architects dictate what needs to happen here and unless I have VERY good reasons I should comply to what they say: change saploc to saploc$ and change sapmnt to sapmnt$.
If anybody has anymore thoughts, I'd be very interested.
Cheers,
Steven Dijkman

How to keep the data entered on a page apex

how to keep the data entered on a page apex
so, I've got a registration page then wish go to another page P2 and I return to this P1 without losing data

Hi,
As long as the registration page is within the same session, the values will remain in the session until they are specifically cleared out. This can be done by a process on a page - so check if you have a "reset page" process on P1 and, if you do, delete it. This can also be done on a branch - so check the branch that takes you to P2 and see if there is anything entered in the Clear Cache setting and, if it shows *1*, remove that. There are other ways as well, but these are most typical.
Andy

How to read the properties file available in Server File structure in webdy

hi all,
I have developed one webdynpro application. In this application i need to access mdm server to continue. For getting the connection i need to pass the IP addresses.
Can i have code how to read the properties file which is residing in the server file. with out included along with the application. keeping some where in the file structure in the server. I want to read that properties file by maintain the iP addresses and users in properties file based on the key i want to read like below.
servername="abcServer"
username="john"
password="test123"
Please send me the code how to read this properties file from the file structure and how to read this values by key in webdynpro application
Regards
Vijay

Hi Vijay,
You can try this piece of code too:
Properties props = new Properties();
//try retrieve data from file
//catch exception in case properties file does not exist
try {
         props.load(new FileInputStream("c:\property\Test.properties")); //File location
         String serverName = props.getProperty("servername"); //Similarly, you can access the other properties
         if(serverName==null)
           //....do appropriate handling
     }     catch(IOException e)
               e.printStackTrace();
Regards,
Alka.

How to extract the cobol files into owb

Hi
How to extract the cobol files in owb,I am using OWB9.2.
Ex:I am having 2 records DCEC4000100 9159000050C those values are 5 bytes 'RAVI and 6 bytes '15000'.
Using contorl file i am trying to load these into Oracle,But i am not able into insert these records into Oracle.
Can any tell me how to handle this kind of situation?
Regards,
Rupak

Good morning Ashok,
Your data is in a SQL*Loader supported datatype, so basically it should not be a problem.
Have you checked the Database Utilities guide (for Oracle9i for instance: http://www.lc.leidenuniv.nl/awcourse/oracle/server.920/a96652/toc.htm) on how to handle this?
I'll also repeat my previous question, have you ever been able to load data into the database using SQL*Loader (either using ASCII values or any other datatype)?
For the OWB part, have you read "Importing Data Definitions" (typically chapter 4)? More specifically, "Specifying Field Properties" in "About Flat File Sources and Targets"?
In "SQL*Loader Properties" it says the following:
Type Describes the data type of the field for the SQL*Loader. You can use the Flat
File Sample Wizard to import the following data types: CHAR, DATE, DECIMAL
EXTERNAL, FLOAT EXTERNAL, INTEGER EXTERNAL, ZONED , AND ZONED
EXTERNAL. For complete information on SQL*Loader field and data types, refer to
Oracle9i Utilities. Currently, only portable datatypes are supported.
If you check the database utitlities guide (chapter 6 Field List Reference) and look for "SQL*Loader Datatypes", you'll find (packed) decimal under the Nonportable Datatypes. This implies that OWB does not support it.
This does not mean you can't use SQL*Loader, you'll only have to define everything separate from OWB and call it separately as well.
Good luck, Patrick

In LSMW using BAPI Scenario, how to assign the same file to HEADER and ITEM

Hi,
i got a problem when we are in ASSIGN FILES step how to assign the same file to both HEADER and ITEM Structures?

Hi,
When defining the file in specify files step check the option 'Data for Multiple Source Structures'.
Hope it helps.
Thanks,
Mahesh

How to run the batch files

Hi Experts,
I am trying to implement automatic cache purging every day at specified time and i created txt file with SApurge All cache() and created bat file with nqcmd -q Analyticsweb -u username -p password -s (txt file location).
Now i want to run this bat file daily at specified time with out executing manually may i know how to run the batch file at specified time .
Thanks,

There is task type as command in workflow manager if you want you can go for that during the load
nqcmd -d "AnalyticsWeb" -u Administrator -p Administrator -s "D:\PowerCenter8.1.1\server\infa_shared\SrcFiles\1_BIPurgeCache.txt"
Check these urls
http://docs.oracle.com/cd/E12103_01/books/AnySched/AnySched_Scripts3.html
http://deliverbi.blogspot.com/2011/12/purge-all-cache-from-dashboard.html

How to get the wsdl file

hi all,
here java people have given wsdl file to me, how to do the scenario,
and how to get the wsdl file from the java people.
regards,
priya

Hello Priya,
Go to http://<hostname>:50000/wsnavigator or any other UDDI server and search for the web service to be invoked
There you can find the Webservice Definition (WSDL) file.
Check this weblog:
Invoke Webservices using SAPXI
regards
Gangaprasad

ODI - Multi development environment how to share the JAR files

Hi,
For some of our functionality, existing KM not sufficient so we created with our own KM and we have called some jave code which we created and place inside lib directory of ODI as a JAR file. there are four people in the development work. so we have four development environment(all are complete installation, i.e while installing we choosing Complete Option).
One of our developer created the our own KM and he placed the jar file in his own Dev environment's lib Directory. Since four Dev environment shares the some work rep we could see the new KM and all the ODI object in all the dev env. but if we run the the ODI interface which use the new KM from other Dev environment where we dint place the jar we are getting Error.
if we keep the jar file in all the other three Dev environment's LIB directory then respective interface working.
here my doubt, is there any other way to share the JAR file to all the Environment without copying into everywhere?
Thanks
Knidhi

Thanks you verymuch Cezar and Ratish, now almost i got the answer for my question.
i installed ODI Server into separate machine. it has folder structure as follows
Directory: D:/ODIServer/oracledi/ has the following subfolder
1.bin 2.drivers 3.lib 4.tools.
here i need to keep my Jar files under the lib folder. am i right?
and bin directory contains only Agent related batch files. (agent.bat, agentscheduler.bat,agentservice.bat,agentstop.bat,agentstart.bat,agentweb.bat and jython.bat and respective .sh files)
here dont know how to precede the following things
1. how to configure the Master and Work Repository information with ODI Server?(MR and WR i already created with the help of one the ODI Client)
2. how to configure the Client machine to Server?
3. Since ODI Server not having the Topology, how to create the Agent? do i need to use any one of the ODI Client for this task?
--Thanks
Knidhi

Reformatting PC, How to keep the checked files?

Similar Messages

Maybe you are looking for