Refresh a folio?
Hi guys,
I've a small question...
Is it possible to "refresh" a folio? So that all the folios restart at the top? I now that on iPad, you have to tap the topbar three times, but this solution doesn't work for Android devices... Is there a solution for Android?
Thanks!
Gr,
Nick
Another method is to open a different folio.
Similar Messages
-
Content Viewer not refreshing, old folios disappeared
I wonder if anyone else is experiencing this and if this issue is related to some of the other download problem threads?
My clients contacted me that they were unable to see recent updates I made to our shared development folio. I was able to replicate this as my own folios have stopped updating since yesterday afternoon.
I deleted and re-installed the content viewer on my iPad, and since then all my previous folios fail to show up on the iPad.
I created a small folio, with a blank page, this does show up. However any updates with a bit of content in them appear to upload correctly, but the folios no longer refresh on the iPad.
Several clients also tried to either "archive" existing folios in the hope that they would subsequently refresh, or deleted the content viewer from their iPads with similar resuts to mine.
When starting the content viewer I coccasionally receive a message that says "Cannot contact server, an error has occurred"
Are other folks experiencing this?
Thanks, JBOK, I figured out this was an orientation issue, related to a bug discussed in post:
http://forums.adobe.com/message/3831423#3831423
Apparently when uploading something like a 1024x4000 vertical smooth scrolling stacks, one must
a.) specify an _h filename postfix (makes sense)
b.) Do NOT use the "add" or "update" function of the folio producer tools, but instead use the "import" function for the file's orientation to be interpreted correctly (a work-around)
c.) After import, change the default orientation after importing a _h postfix file from horizontal only to "both" or "vertical"
Tx ,JB -
Error when starting DPS App Builder - Application not found
WTF folks.
This morning I open my document (CS5) and it says I have to update my folio tools (needless to say i hate it to be forced to do an update before I can start working).
Well, I do an update, both tools (Folio Builder and Producer Tools).
Now there seem to be some changes, I cant refresh my folio via menu anymore. When choosing the new "build app"-option I get an error :
"An error occured while starting DPS App Builder. The DPS App-Builder Application was not found" (translated).
German original version: "Beim Starten von DPS App Builder ist ein Fehler aufgetreten. Die DPS App Builder-Anwendung wurde nicht gefunden."
Any Solutions? Where to get the mysterious "App-Builder Application?"
edit: refresh is now only possible inside the folio it seems.App Builder is nothing but a new name to Viewer Builder. Download it from DPS Dashbaord.
-
Hello,
Today I log in and can not update any Folios. I get the following pop up in the web interface.
An error has occurred while saving your changes.
A newer version of Folio Builder is available for download. Update Folio Builder to the latest version here.
Not really sure why I need to update anything as this is the web interface but I follow the link anyway and download the folio builder that is available
Here goes to http://www.adobe.com/support/downloads/collection.jsp?collID=4&platform=win
I then go to http://www.adobe.com/support/downloads/detail.jsp?ftpID=5155
and download the same version as I already have. And thus, am still getting the error.
Have tried refreshing cache, in both chrome and IE.
If anyone can offer some advice, it would be most welcome.Hi,
but except for the DPS App Builder, the other tools are not yet online or did I miss something?
Thanks,
Yves -
I keep trying to update Folio Builder to 2.0 and can't do it.
I have refreshed my browser, used a different browser, but I keep getting version 1.9 and it won't load. I have the new DPS Folio Producer and am logged in there.
You need to clear the browser cache.
Bob -
Folio number not updated in the table RG23D
Hi all,
Folio number not updated in the table RG23D when I create depot excise invoice using batch program J_1IJCHK. Can any one help me by providing rootcause and solution.
Thanks in advance.
Regards
BalajiSee can i know in which version u r working,Because if u r in 4.6c there will be some problem.Some patches will be there.
Try this program i have send and assign excise duty
REPORT YJ_1IJCHK MESSAGE-ID 8I.
TABLES : J_1IEXCHDR, "excise header
J_1IEXCDTL, "excise detail
J_1IRG23D , "RG23D register
J_1IWRKCUS, "Plant level customisation
J_1IREGSET, "register set customisation
J_1IEXCDEF, "Tax default information
VBFA, "sales document flow
LIKP, "delivery header
LIPS, "delivery detail
T005, "country information
KUAGV, "sold-to-party information
KUWEV, "ship-to-party information
KNA1, "customer master
VBPA, "sales document partner
TVKO, "sales organisation to company co
VBUK, "delivery information
MAKT, "material description
T001. "company code
selection-screen begin of block delivery_details no intervals.
PARAMETERS: FCODE TYPE C,
DELIVERY LIKE LIPS-VBELN,
EXCGROUP LIKE J_1IEXCHDR-EXGRP,
SERGROUP LIKE J_1IEXCHDR-SRGRP.
TYPES : BEGIN OF RG23D.
INCLUDE STRUCTURE J_1IRG23D.
TYPES: MENGR LIKE J_1IEXCDTL-MENGR, "remaining quantity
MENGA LIKE J_1IEXCDTL-MENGA, "quantity actually rec
ADDBED LIKE J_1IEXCDTL-ADDBED,
ADDSED LIKE J_1IEXCDTL-ADDSED,
ADDAED LIKE J_1IEXCDTL-ADDAED,
END OF RG23D.
DATA : BEGIN OF J1IJ300,
BUKRS LIKE TVKO-BUKRS,
WERKS LIKE LIPS-WERKS,
REGID LIKE J_1IREGSET-J_1IREGID,
WAERS LIKE T001-WAERS,
SHIPFROM_IND TYPE C, " Added 10/12/1998
RG23D_SERIALNO TYPE C, " Added 10/12/1998
END OF J1IJ300.
DATA : TRNTYP(4) TYPE C,
CONDT-NAME(3) TYPE C,
TOTAL_LRG23D LIKE LIPS-LFIMG,
ALLOC_LRG23D LIKE LIPS-LFIMG,
SHIPFROM_IND LIKE J_1IEXCHDR-STATUS,
RG23D_SERIALNO LIKE J_1IEXCHDR-STATUS.
DATA : BEGIN OF XLIPS OCCURS 10,
internal table to store the delivery item information
VBELN LIKE LIPS-VBELN,
POSNR LIKE LIPS-POSNR,
MATNR LIKE LIPS-MATNR,
MAKTX LIKE MAKT-MAKTX,
WERKS LIKE LIPS-WERKS,
LGORT LIKE LIPS-LGORT,
CHARG LIKE LIPS-CHARG,
LFIMG LIKE LIPS-LFIMG,
MEINS LIKE LIPS-MEINS,
BED LIKE J_1IRG23D-EXBED,
SED LIKE J_1IRG23D-EXSED,
AED LIKE J_1IRG23D-EXAED,
CUR LIKE J_1IRG23D-EXCUR,
SELFLAG TYPE C , "T=excise invoice selected
INDEX LIKE SY-TABIX, "index in the table
FLG TYPE C. "item selection
DATA : END OF XLIPS.
DATA : CRG23D TYPE RG23D OCCURS 30 WITH HEADER LINE.
contains all rg23d entries for the document
DATA : LRG23D TYPE RG23D OCCURS 30 WITH HEADER LINE.
contains item rg23d entries
DATA : BEGIN OF Z_1IRG23D OCCURS 30.
stores the data to be updated
INCLUDE STRUCTURE J_1IRG23D.
DATA : END OF Z_1IRG23D.
DATA : BEGIN OF EXCINV OCCURS 30.
factory inovoics selected for item
INCLUDE STRUCTURE J_1IEXCDTL.
DATA : END OF EXCINV.
DATA : BEGIN OF ASSIGNED_EXCINV OCCURS 30.
INCLUDE STRUCTURE J_1IEXCDTL.
DATA : END OF ASSIGNED_EXCINV.
DATA : A_INDEX LIKE SYST-TABIX.
DATA : BEGIN OF LOCK_TABLE OCCURS 10,
table containing plant-material combination and status of the lock
WERKS LIKE J_1IEXCDTL-WERKS,
MATNR LIKE J_1IEXCDTL-MATNR,
STATUS TYPE C, "LOCKED/UNLOCKED
END OF LOCK_TABLE.
DATA : BEGIN OF LOCKTAB OCCURS 0,
TRNTYP LIKE J_1IEXCDTL-TRNTYP,
DOCNO LIKE J_1IEXCDTL-DOCNO,
DOCYR LIKE J_1IEXCDTL-DOCYR,
ZEILE LIKE J_1IEXCDTL-ZEILE,
END OF LOCKTAB.
DATA :
CRG23D-CTR TYPE I, "Line count of crg23d table
SHIPFROM LIKE J_1IRG23D-SHIPFROM,
FOLIO LIKE J_1IRG23D-FOLIO,
SERIALNO LIKE J_1IRG23D-SERIALNO,
DEPEXNUM LIKE J_1IRG23D-DEPEXNUM,
DEPEXYEAR LIKE J_1IRG23D-DEPEXYEAR.
CONSTANTS :
BED LIKE CONDT-NAME VALUE 'BED',
AED LIKE CONDT-NAME VALUE 'AED',
SED LIKE CONDT-NAME VALUE 'SED',
CES LIKE CONDT-NAME VALUE 'CES',
LOCKED TYPE C VALUE '1',
UNLOCKED TYPE C VALUE '2'.
AT SELECTION-SCREEN.
PERFORM CHECK_VBELN_INPUT.
IF FCODE = 'S'.
PERFORM DELIVERY_START_USER_EXIT.
PERFORM READ_DELIVERY_HEADER.
PERFORM GET_COMP_CODE.
PERFORM READ_CUSTOMISATION.
PERFORM GET_ITEM_INFO.
PERFORM LOCKING.
PERFORM RG23D_SELECTION.
PERFORM SAVE_DOCUMENT.
MESSAGE I000 WITH 'Selection Complete for Delivery ' DELIVERY.
ELSEIF FCODE = 'V'.
PERFORM GET_COMP_CODE.
PERFORM READ_CUSTOMISATION.
PERFORM GET_ITEM_INFO.
PERFORM LOCKING.
PERFORM UPDATE_DOCUMENT.
MESSAGE I000 WITH 'Verfiy/Post Complete for Delivery ' DELIVERY.
ENDIF.
FORM CHECK_VBELN_INPUT.
Validate Function Code
IF NOT ( FCODE = 'S' OR FCODE = 'V' ).
MESSAGE E000 WITH 'Valid Functions are S/V - Select/Verify Post'.
ENDIF.
IF DELIVERY IS INITIAL.
MESSAGE E000 WITH 'Delivery number cannot be initial'.
ENDIF.
check if goods issue done for the delivery
SELECT SINGLE WBSTK INTO VBUK-WBSTK
FROM VBUK
WHERE VBELN = DELIVERY.
IF SY-SUBRC = 0.
IF VBUK-WBSTK <> 'C' AND FCODE = 'V'.
MESSAGE W339 WITH DELIVERY.
ENDIF.
ELSE.
MESSAGE E000 WITH 'Invalid Delivery'.
ENDIF.
if in select mode check if excise invoice already selected for delive
SELECT SINGLE * FROM J_1IRG23D
WHERE VBELN = DELIVERY.
IF FCODE = 'S'.
IF SY-SUBRC = 0.
MESSAGE E325 WITH DELIVERY.
ENDIF.
ELSEIF FCODE = 'V'.
IF SY-SUBRC NE 0.
MESSAGE E000 WITH 'Selection not over for ' DELIVERY.
ELSEIF J_1IRG23D-STATUS = 'P'.
MESSAGE E000 WITH 'Record Already Posted '.
ENDIF.
ENDIF.
CLEAR J_1IRG23D.
ENDFORM. " CHECK_VBELN_INPUT
FORM READ_DELIVERY_HEADER.
SELECT SINGLE * FROM LIKP
WHERE VBELN = DELIVERY.
get the sold-to-party
CLEAR: KUAGV, KUWEV.
SELECT SINGLE KUNNR NAME1 LAND1
FROM KNA1 INTO (KUAGV-KUNNR,KUAGV-NAME1,KUAGV-LAND1)
WHERE KUNNR = LIKP-KUNAG.
get the ship-to-party
SELECT SINGLE KUNNR LAND1 NAME1
FROM KNA1 INTO (KUWEV-KUNNR,KUWEV-LAND1,KUWEV-NAME1)
WHERE KUNNR = LIKP-KUNNR.
ENDFORM. " READ_DELIVERY_HEADER
FORM GET_COMP_CODE.
get the company code of the document from the sales organisation
CLEAR TVKO-BUKRS.
SELECT SINGLE BUKRS FROM TVKO INTO TVKO-BUKRS
WHERE VKORG = LIKP-VKORG.
J1IJ300-BUKRS = TVKO-BUKRS.
SELECT SINGLE WAERS FROM T001 INTO J1IJ300-WAERS
WHERE BUKRS = J1IJ300-BUKRS.
ENDFORM. " GET_COMP_CODE
FORM READ_CUSTOMISATION.
SELECT SINGLE WERKS INTO J1IJ300-WERKS
FROM LIPS
WHERE VBELN = DELIVERY.
Plant level customisation
SELECT SINGLE * FROM J_1IWRKCUS
WHERE J_1IWERKS = J1IJ300-WERKS .
IF SY-SUBRC <> 0.
MESSAGE E303 WITH 'plant' J1IJ300-WERKS 'J_1IWRKCUS'.
ENDIF.
IF J_1IWRKCUS-J_1IDEPOT IS INITIAL.
plant is defined as factory
MESSAGE E322 WITH J1IJ300-WERKS.
ENDIF.
J1IJ300-REGID = J_1IWRKCUS-J_1IREGID.
TRNTYP = 'DLDO'.
SELECT SINGLE * FROM J_1IREGSET
WHERE J_1IREGID = J1IJ300-REGID.
IF SY-SUBRC <> 0.
MESSAGE E303 WITH 'Register id' J1IJ300-REGID 'J_1IREGSET'.
ENDIF.
ENDFORM. " READ_CUSTOMISATION
*& Form GET_ITEM_INFO
text *
--> p1 text
<-- p2 text
FORM GET_ITEM_INFO.
REFRESH : CRG23D, LRG23D, EXCINV, XLIPS.
PERFORM READ_DELIVERY_ITEM.
ENDFORM. " GET_ITEM_INFO
*& Form READ_DELIVERY_ITEM
text *
--> p1 text
<-- p2 text
FORM READ_DELIVERY_ITEM.
DATA : CNT LIKE SY-TABIX.
CLEAR CNT.
REFRESH XLIPS.
SELECT * FROM LIPS
WHERE VBELN = DELIVERY.
read the delivery item
perform plant checking only if in create mode
IF LIPS-WERKS <> J1IJ300-WERKS.
plant is different from that of the first item
SELECT SINGLE J_1IREGID INTO J_1IWRKCUS-J_1IREGID
FROM J_1IWRKCUS
WHERE J_1IWERKS = LIPS-WERKS.
IF SY-SUBRC <> 0.
MESSAGE E303 WITH 'plant' LIPS-WERKS 'J_1IWRKCUS'.
ENDIF.
IF J_1IWRKCUS-J_1IREGID <> J1IJ300-REGID.
register id of the two plants are different
MESSAGE E338 WITH DELIVERY.
ENDIF.
ENDIF.
CLEAR XLIPS.
store the item details
XLIPS-VBELN = LIPS-VBELN.
XLIPS-POSNR = LIPS-POSNR.
XLIPS-MATNR = LIPS-MATNR.
PERFORM GET_MATERIAL_DESC
USING XLIPS-MATNR
XLIPS-MAKTX.
XLIPS-WERKS = LIPS-WERKS.
XLIPS-LGORT = LIPS-LGORT.
XLIPS-CHARG = LIPS-CHARG.
XLIPS-LFIMG = LIPS-LFIMG.
XLIPS-MEINS = LIPS-VRKME. "changed 2.3.98
CLEAR : XLIPS-BED, XLIPS-SED, XLIPS-AED.
XLIPS-CUR = J1IJ300-BUKRS.
CNT = CNT + 1.
XLIPS-INDEX = CNT.
XLIPS-SELFLAG = 'F'.
APPEND XLIPS.
ENDSELECT.
ENDFORM. " READ_DELIVERY_ITEM
*& Form GET_MATERIAL_DESC
text *
--> p1 text
<-- p2 text
FORM GET_MATERIAL_DESC USING MATNR MAKTX.
SELECT SINGLE MAKTX FROM MAKT INTO MAKTX
WHERE MATNR = MATNR
AND SPRAS = 'E' .
ENDFORM. " GET_MATERIAL_DESC
*& Form LOCKING
text *
--> p1 text
<-- p2 text
FORM LOCKING.
REFRESH LOCK_TABLE.
LOOP AT XLIPS.
LOCK_TABLE-WERKS = XLIPS-WERKS.
LOCK_TABLE-MATNR = XLIPS-MATNR.
LOCK_TABLE-STATUS = UNLOCKED.
COLLECT LOCK_TABLE.
ENDLOOP.
PERFORM LOCK_UNLOCK_PLANT_MATERIAL USING LOCKED.
SELECT TRNTYP DOCNO DOCYR ZEILE INTO
(LOCKTAB-TRNTYP,
LOCKTAB-DOCNO,LOCKTAB-DOCYR,
LOCKTAB-ZEILE)
FROM J_1IEXCDTL
WHERE TRNTYP = 'GRPO'
AND WERKS = XLIPS-WERKS
AND LGORT = XLIPS-LGORT
AND MATNR = XLIPS-MATNR
AND CHARG = XLIPS-CHARG.
APPEND LOCKTAB.
ENDSELECT.
*share lock for all excise invoices
LOOP AT LOCKTAB.
CALL FUNCTION 'ENQUEUE_EJ_1IEXDTL'
EXPORTING
MODE_J_1IEXCDTL = 'S'
MANDT = SY-MANDT
TRNTYP = LOCKTAB-TRNTYP
DOCYR = LOCKTAB-DOCYR
DOCNO = LOCKTAB-DOCNO
ZEILE = LOCKTAB-ZEILE
EXCEPTIONS
FOREIGN_LOCK = 1
SYSTEM_FAILURE = 2
OTHERS = 3.
ENDLOOP.
ENDFORM. " LOCKING
*& Form LOCK_UNLOCK_PLANT_MATERIAL
text *
--> p1 text
<-- p2 text
FORM LOCK_UNLOCK_PLANT_MATERIAL USING ACTION.
DATA: __UNAME LIKE SY-UNAME,
__OBJECT LIKE DD25V-VIEWNAME.
DATA : BEGIN OF LOCK_STRUCT,
GRANNAME(10) VALUE 'J1IJ',
ENQMODE VALUE 'E',
MANDT LIKE SY-MANDT,
WERKS LIKE J_1IEXCDTL-WERKS,
MATNR LIKE J_1IEXCDTL-MATNR,
END OF LOCK_STRUCT.
LOCK_STRUCT-MANDT = SY-MANDT.
LOOP AT LOCK_TABLE WHERE STATUS <> ACTION.
perform the locking/unlocking operation only for the items for which
it is not already done
LOCK_STRUCT-WERKS = LOCK_TABLE-WERKS.
LOCK_STRUCT-MATNR = LOCK_TABLE-MATNR.
CALL 'C_ENQUEUE'
ID 'OPCODE' FIELD ACTION
ID 'ENQOBJ' FIELD 'J_1IJ'
ID '01' FIELD LOCK_STRUCT
ID 'COLLISION_UNAME' FIELD __UNAME
ID 'COLLISION_OBJECT' FIELD __OBJECT.
CASE SY-SUBRC.
WHEN 0.
LOCK_TABLE-STATUS = ACTION.
MODIFY LOCK_TABLE.
WHEN 2.
MESSAGE E341 WITH LOCK_TABLE-WERKS LOCK_TABLE-MATNR __UNAME.
WHEN OTHERS.
IF ACTION = LOCKED.
MESSAGE E342 WITH 'locking'
LOCK_TABLE-WERKS LOCK_TABLE-MATNR.
ELSE.
MESSAGE E342 WITH 'unlocking'
LOCK_TABLE-WERKS LOCK_TABLE-MATNR.
ENDIF.
ENDCASE.
ENDLOOP.
ENDFORM. " LOCK_UNLOCK_PLANT_MATERIAL
*& Form RG23D_SELECTION
text *
--> p1 text
<-- p2 text
FORM RG23D_SELECTION.
REFRESH CRG23D.
REFRESH ASSIGNED_EXCINV.
LOOP AT XLIPS.
*write: / xlips-vbeln,xlips-posnr,xlips-matnr, xlips-meins, xlips-lfimg.
REFRESH EXCINV.
CALL FUNCTION 'J_1I6_SELECT_EXCISE_INVOICE_DE'
EXPORTING
BUKRS = J1IJ300-BUKRS
CHARG = XLIPS-CHARG
WERKS = XLIPS-WERKS
EXGRP = EXCGROUP
MATNR = XLIPS-MATNR
QTY_CHECK = 'X'
MULTI = 'X'
NO_DAY_CHECK = 'X'
SHIPFROM = SHIPFROM
LGORT = XLIPS-LGORT
TABLES
EXC_TAB = EXCINV
EXCEPTIONS
OTHERS = 1.
TOTAL_LRG23D = 0.
ALLOC_LRG23D = 0.
SORT EXCINV BY DOCYR DOCNO .
LOOP AT ASSIGNED_EXCINV.
READ TABLE EXCINV WITH KEY DOCYR = ASSIGNED_EXCINV-DOCYR
DOCNO = ASSIGNED_EXCINV-DOCNO
ZEILE = ASSIGNED_EXCINV-ZEILE
BINARY SEARCH.
IF SY-SUBRC = 0.
A_INDEX = SY-TABIX.
EXCINV-MENGR = EXCINV-MENGR - ASSIGNED_EXCINV-MENGR.
MODIFY EXCINV INDEX A_INDEX .
ENDIF.
ENDLOOP.
DELETE EXCINV WHERE MENGR = 0.
total_lrg23d = total balance quantity in the selected excise invoices
alloc_lrg23d = Quantity allocated to a delivery line item,
Allocation continues till
- We have balance quantity in excise invoice selection
- Till total delivery quantity is allocated
LOOP AT EXCINV.
To Force the same shipfrom for all the excise invoices
Shipfrom Ind can be determined in the start user-exit
IF J1IJ300-SHIPFROM_IND = 'Y'.
IF XLIPS-INDEX = 1 AND SY-TABIX = 1.
SHIPFROM = EXCINV-SHIPFROM.
ENDIF.
IF SHIPFROM NE EXCINV-SHIPFROM.
EXCINV-RIND3 = 'X'.
MODIFY EXCINV.
CONTINUE.
ENDIF.
ENDIF.
Allocation
IF XLIPS-LFIMG NE ALLOC_LRG23D.
TOTAL_LRG23D = TOTAL_LRG23D + EXCINV-MENGR.
IF XLIPS-LFIMG > TOTAL_LRG23D.
ALLOC_LRG23D = ALLOC_LRG23D + EXCINV-MENGR.
ELSE.
EXCINV-MENGR = XLIPS-LFIMG - ALLOC_LRG23D.
ALLOC_LRG23D = ALLOC_LRG23D + EXCINV-MENGR.
ENDIF.
ELSE.
EXCINV-RIND3 = 'X'.
ENDIF.
MODIFY EXCINV.
ENDLOOP.
DELETE EXCINV WHERE RIND3 = 'X'.
LOOP AT EXCINV.
MOVE-CORRESPONDING EXCINV TO ASSIGNED_EXCINV.
APPEND ASSIGNED_EXCINV.
CLEAR ASSIGNED_EXCINV.
ENDLOOP.
IF TOTAL_LRG23D < XLIPS-LFIMG.
MESSAGE E000 WITH 'Not enough balance in RG23D ......'.
ENDIF.
Collect all allocated excise invoices to crg23d table
LOOP AT EXCINV.
PERFORM FILL_CRG23D.
APPEND CRG23D.
ENDLOOP.
ENDLOOP.
ENDFORM. " RG23D_SELECTION
*& Form SAVE_DOCUMENT
text *
--> p1 text
<-- p2 text
FORM SAVE_DOCUMENT.
PERFORM PREPARE_RG23D_DATA.
Generate RG23D serial number and Excise Invoice Serial Number
IF J1IJ300-RG23D_SERIALNO = 'Y'.
PERFORM GENERATE_RG23D_SERIAL ON COMMIT.
ENDIF.
PERFORM GENERATE_EXCISE_INV_SERIAL ON COMMIT.
CALL FUNCTION 'J_1I7_USEREXIT_DEPOT_BEF_SAVE'
TABLES
RG23D = Z_1IRG23D
EXCEPTIONS
OTHERS = 1.
PERFORM UPDATE_RG23D ON COMMIT.
PERFORM UPDATE_EXCDTL ON COMMIT.
COMMIT WORK.
PERFORM LOCK_UNLOCK_PLANT_MATERIAL USING UNLOCKED.
PERFORM UNLOCKING.
MESSAGE S333 WITH DELIVERY.
ENDFORM. " SAVE_DOCUMENT
*& Form PREPARE_RG23D_DATA
text *
--> p1 text
<-- p2 text
FORM PREPARE_RG23D_DATA.
REFRESH Z_1IRG23D.
LOOP AT CRG23D WHERE MENGE <> 0.
CLEAR Z_1IRG23D.
Z_1IRG23D = CRG23D.
Z_1IRG23D-USNAM = SY-UNAME.
Z_1IRG23D-CPUDT = SY-DATUM.
Z_1IRG23D-EXGRP = EXCGROUP.
Z_1IRG23D-SRGRP = SERGROUP.
APPEND Z_1IRG23D.
IF CRG23D-ADDAED <> 0 OR CRG23D-ADDSED <> 0 OR CRG23D-ADDAED <> 0 .
additional excise is applicable
make quantity zero for A certificate entries
CLEAR : Z_1IRG23D-MENGE.
get all the A certificates for the excise document item
SELECT * FROM J_1IEXCDTL
TODO : add the transaction type to the selection procedure
WHERE RDOC1 = CRG23D-DOCNO
AND RYEAR1 = CRG23D-DOCYR
AND RITEM1 = CRG23D-ZEILE
AND RIND1 = 'G'.
get the A certificate number
SELECT SINGLE
EXNUM EXYEAR INTO (Z_1IRG23D-EXNUM, Z_1IRG23D-EXYEAR)
FROM J_1IEXCHDR
WHERE TRNTYP = J_1IEXCDTL-TRNTYP
AND DOCYR = J_1IEXCDTL-DOCYR
AND DOCNO = J_1IEXCDTL-DOCNO.
Z_1IRG23D-TRNTYP = J_1IEXCDTL-TRNTYP.
Z_1IRG23D-DOCYR = J_1IEXCDTL-DOCYR.
Z_1IRG23D-DOCNO = J_1IEXCDTL-DOCNO.
Z_1IRG23D-ZEILE = J_1IEXCDTL-ZEILE.
Z_1IRG23D-EXBED = ( J_1IEXCDTL-EXBED * CRG23D-MENGE )
/ CRG23D-MENGA.
Z_1IRG23D-EXSED = ( J_1IEXCDTL-EXSED * CRG23D-MENGE )
/ CRG23D-MENGA.
Z_1IRG23D-EXAED = ( J_1IEXCDTL-EXAED * CRG23D-MENGE )
/ CRG23D-MENGA.
Z_1IRG23D-RG23ASER = J_1IEXCDTL-RG23ASER.
Z_1IRG23D-RG23CSER = J_1IEXCDTL-RG23CSER.
Z_1IRG23D-RGPLASER = J_1IEXCDTL-RGPLASER.
APPEND Z_1IRG23D.
ENDSELECT.
ENDIF.
ENDLOOP.
ENDFORM. " PREPARE_RG23D_DATA
*& Form UPDATE_RG23D
text *
--> p1 text
<-- p2 text
FORM UPDATE_RG23D.
*update the rg23d register
INSERT J_1IRG23D FROM TABLE Z_1IRG23D ACCEPTING DUPLICATE KEYS.
IF SY-SUBRC <> 0.
MESSAGE A308 WITH 'J_1IRG23D'.
ENDIF.
ENDFORM. " UPDATE_RG23D
*& Form UPDATE_EXCDTL
text *
--> p1 text
<-- p2 text
FORM UPDATE_EXCDTL.
LOOP AT CRG23D WHERE MENGE <> 0.
update the remaining quantity in the excise invoice item tables
UPDATE J_1IEXCDTL
SET MENGR = MENGR - CRG23D-MENGE
AENAM = SY-UNAME
AEDAT = SY-DATUM
WHERE TRNTYP = 'GRPO'
AND DOCYR = CRG23D-DOCYR
AND DOCNO = CRG23D-DOCNO
AND ZEILE = CRG23D-ZEILE.
IF SY-SUBRC <> 0.
MESSAGE A308 WITH 'J_1IRG23D'.
ENDIF.
ENDLOOP.
ENDFORM. " UPDATE_EXCDTL
*& Form FILL_CRG23D
text *
--> p1 text
<-- p2 text
FORM FILL_CRG23D.
CRG23D-TRNTYP = EXCINV-TRNTYP.
CRG23D-DOCYR = EXCINV-DOCYR.
CRG23D-DOCNO = EXCINV-DOCNO.
CRG23D-ZEILE = EXCINV-ZEILE.
CRG23D-VBELN = XLIPS-VBELN.
CRG23D-POSNR = XLIPS-POSNR.
CRG23D-EXNUM = EXCINV-EXNUM.
CRG23D-EXYEAR = EXCINV-EXYEAR.
CRG23D-LIFNR = EXCINV-LIFNR.
CRG23D-MATNR = EXCINV-MATNR.
CRG23D-MAKTX = EXCINV-MAKTX.
CRG23D-CHAPID = EXCINV-CHAPID.
CRG23D-MEINS = EXCINV-MENGR_UOM.
CRG23D-WERKS = EXCINV-WERKS.
CRG23D-EXCUR = EXCINV-EXCUR.
CRG23D-RG23ASER = EXCINV-RG23ASER.
CRG23D-RG23CSER = EXCINV-RG23CSER.
CRG23D-RGPLASER = EXCINV-RGPLASER.
CRG23D-MENGR = EXCINV-MENGR.
CRG23D-MENGA = EXCINV-MENGA.
CRG23D-MENGE = EXCINV-MENGR. " Move the allocated Qty
CRG23D-EXBED = ( EXCINV-EXBED * CRG23D-MENGE ) / EXCINV-MENGA.
CRG23D-EXSED = ( EXCINV-EXSED * CRG23D-MENGE ) / EXCINV-MENGA.
CRG23D-EXAED = ( EXCINV-EXAED * CRG23D-MENGE ) / EXCINV-MENGA.
ENDFORM. " FILL_CRG23D
*& Form UPDATE_DOCUMENT
text *
--> p1 text
<-- p2 text
FORM UPDATE_DOCUMENT.
LOOP AT XLIPS.
UPDATE J_1IRG23D SET STATUS = 'P'
WHERE VBELN = XLIPS-VBELN
AND POSNR = XLIPS-POSNR.
ENDLOOP.
COMMIT WORK.
ENDFORM. " UPDATE_DOCUMENT
*& Form DELIVERY_START_USER_EXIT
text *
--> p1 text
<-- p2 text
FORM DELIVERY_START_USER_EXIT.
CALL FUNCTION 'J_1I7_USEREXIT_EXGRP_DETERM'
EXPORTING
EXCGRP = EXCGROUP
MBLNR =
MJAHR =
VENDOR =
VBELN = DELIVERY
IMPORTING
EXCGRP = EXCGROUP
SHIPFROM_IND = J1IJ300-SHIPFROM_IND
RG23D_SERIALNO = J1IJ300-RG23D_SERIALNO
EXCEPTIONS
OTHERS = 1.
CALL FUNCTION 'J_1I7_USEREXIT_SERGRP_DETERM'
EXPORTING
SRGRP = SERGROUP
MBLNR =
MJAHR =
VBELN = DELIVERY
IMPORTING
SRGRP = SERGROUP
EXCEPTIONS
OTHERS = 1.
ENDFORM. " DELIVERY_START_USER_EXIT
*& Form GENERATE_RG23D_SERIAL
text *
--> p1 text
<-- p2 text
FORM GENERATE_RG23D_SERIAL.
LOOP AT Z_1IRG23D WHERE MENGE <> 0.
CLEAR: FOLIO, SERIALNO.
SELECT MAX( FOLIO ) MAX( SERIALNO )
INTO (Z_1IRG23D-FOLIO, Z_1IRG23D-SERIALNO)
FROM J_1IRG23D
WHERE TRNTYP = Z_1IRG23D-TRNTYP
AND DOCNO = Z_1IRG23D-DOCNO
AND DOCYR = Z_1IRG23D-DOCYR
AND ZEILE = Z_1IRG23D-ZEILE.
MODIFY Z_1IRG23D.
ENDLOOP.
ENDFORM. " GENERATE_RG23D_SERIAL
*& Form GENERATE_EXCISE_INV_SERIAL
text *
--> p1 text
<-- p2 text
FORM GENERATE_EXCISE_INV_SERIAL.
CLEAR: DEPEXNUM, DEPEXYEAR.
CALL FUNCTION 'J_1I6_DETERMINE_EXC_YEAR'
EXPORTING
I_BUKRS = J1IJ300-BUKRS
IMPORTING
EXCISE_YEAR = DEPEXYEAR
EXCEPTIONS
MISS_COMPANY = 1
OTHERS = 2.
IF SY-SUBRC NE 0.
MESSAGE E526 WITH 'Company ' J1IJ300-BUKRS.
ENDIF.
CALL FUNCTION 'NUMBER_GET_NEXT'
EXPORTING
NR_RANGE_NR = '01'
OBJECT = 'J_1IDEPINV'
QUANTITY = '1'
SUBOBJECT = SERGROUP
TOYEAR = DEPEXYEAR
IMPORTING
NUMBER = DEPEXNUM
EXCEPTIONS
INTERVAL_NOT_FOUND = 1
NUMBER_RANGE_NOT_INTERN = 2
OBJECT_NOT_FOUND = 3
QUANTITY_IS_0 = 4
QUANTITY_IS_NOT_1 = 5
INTERVAL_OVERFLOW = 6
OTHERS = 7.
CASE SY-SUBRC.
WHEN 0.
WHEN 1.
MESSAGE A336 WITH 'internal document' ': Interval not found'
'. Number object : J_1IDEPINV'.
WHEN 3.
MESSAGE A336 WITH 'internal document' ': Object not found'
'. Number object : J_1IDEPINV'.
WHEN OTHERS.
MESSAGE A336 WITH 'internal document'
'. Number object : J_1IDEPINV'.
ENDCASE.
Update Depot Excise Invoice Year and Number in the table
LOOP AT Z_1IRG23D.
Z_1IRG23D-SERIALNO = Z_1IRG23D-SERIALNO + 1.
Z_1IRG23D-DEPEXYEAR = DEPEXYEAR.
Z_1IRG23D-DEPEXNUM = DEPEXNUM.
MODIFY Z_1IRG23D.
ENDLOOP.
ENDFORM. " GENERATE_EXCISE_INV_SERIAL
*& Form UNLOCKING
text
--> p1 text
<-- p2 text
FORM UNLOCKING.
LOOP AT LOCKTAB.
CALL FUNCTION 'DEQUEUE_EJ_1IEXDTL'
EXPORTING
MODE_J_1IEXCDTL = 'S'
MANDT = SY-MANDT
TRNTYP = LOCKTAB-TRNTYP
DOCYR = LOCKTAB-DOCYR
DOCNO = LOCKTAB-DOCNO
ZEILE = LOCKTAB-ZEILE.
ENDLOOP.
ENDFORM. " UNLOCKING -
Folio Web Viewer crashing frequently with v28
I've been noticing that the folio web viewer is crashing before web pages fully load for a lot of my hyperlinks. This seems to happen for media-rich websites, but I haven't experienced crashes with such frequency in the past.
When a button link is clicked, the web viewer begins to load then immediately disappears (sliding to the bottom of the screen before the web content finishes loading).
Any one having issues with the folio web viewer?
Are there any open issues or way to resolve?
My only workaround is to make links open in Safari, but that is obviously not ideal solution.Hi,
Thanks for moving it, I didn't notice the .NET section.
No, it's not a time-out. I can make it crash immediately by opening the page, clicking on the button to refresh the report, changing the parameters, and then clicking the button again.
Edit:
This is very strange. Using Fiddler to launch IE makes it behave itself! It won't crash! However, when I go to the site with IE launched by Fiddler, it asks me for my login credentials. I'm not sure why it needs them. What does Fiddler do to IE to make it not include network authentication?
Edited by: Sybsward on Dec 21, 2010 3:30 PM -
CS5 Folio Builder Panel Update - Panel Gone
I just updated the Folio Builder Panel for CS5 on Mac to the latest version (Jan 26, 2012) and when I run InDesign, the Folio Builder Panel is no longer there. Also, the CSLive panel gives me an "internal error" message. I installed the updates on my PC for CS 5.5 and it all seems to work. However, I need to work in CS5 for this particular project. Is this a known issue? How do I remedy the situation? In case it matters, I also updated the Folio Producer Tools (Jan 17, 2012), as well.
So, I ended up getting everything ironed out, though it took a couple of hours of trying various things. Essentially, the Folio Builder Panel was installed, however Indesign was not seeing it. I tried uninstalling and reinstalling Indesign, but that didn't remove the Folio Builder Panel, and did not "refresh" it to become visible.
Ultimately, I had to go throught the app folders and manually uninstall the extension. After reinstalling, the panel showed up. However a new problem emerged. Indesign was trying to login to my account but just spinning and nothing was happening. I could not cancel the "sign in" attempt. Finally, this was resolved by opening key chain and deleting the Adobe entry from there which allowed me to reenter my credentials.
Whew. Thank goodness that's over. (until the next update, that is).
Hopefully, this can save others some time who may run into this. Seems like it was a bit of a fluke. -
Can not refresh view data in STRUST
I am using the JSP (STRUTS) for developing my App.
I get a list of contact. In bellow it, I make a link for each contacts.
When i view details of one contact. On click link below.
My pages:
listcontact.jsp
contactdetails.jsp
When i request a details of contact from list contact -> View successfull.
But when i refresh the contactdetails.jsp page. I got a message error:
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.7 logs.
I have to use:
response.setHeader("Cache-Control","no-store");
response.setHeader("Pragma","no-cache");
But can't refresh any way this page.
Plase show me the way to solve it.
Thanks
Vu Nguyenhi,
Here are codes
listdata = new CompanyListData();
companyList = (ArrayList) session.getAttribute("datalist_company");
if (companyList == null)
companyList = (ArrayList) listdata.getCompanyList(datasource);
session.setAttribute("total", companyList.size()+ " companies");
session.setAttribute("datalist_company", companyList);
return (mapping.findForward("success"));
And for details:
if ((addressItem==null && companyName!=null)||(addressItem==null&& companyId!="0"))
addressData = new AddressDetailData();
addressItem = addressData.getAddressItem(datasource, companyId);
session.setAttribute("addressDetail", addressItem);
I got companyID by:
String companyId = request.getParameter("companyId");
return (mapping.findForward("success"));
Please gest the problems that.
Thanks, -
Hi All ,
I am facing an issue where the EPM Excel Templates on SERVER ROOT FOLDER take time to open on 1 system . It also takes great amount of time to REFRESH . While on an another system the same Report opens rather quickly and refreshes also quickly .
Regards,
SHUBHAMHi Shubham,
Now day excel problems are due to some MS update. Not sure but have a look at below note.
2107965 - Issues in EPM Add-in after installing Microsoft updates -
Refreshing the Data from a embed view in a view container
Hi everybody
I would like to know how can I do to refresh all data from a View with a view container the problem is:
that I have a window that has a view at the same time this has a view container. The Main view brings the data of editable elements when I select one element of the main view the view container brings a list for that element (dependencies) but only the first time a choose an element loads the correct data, when I choose another one it brings the same old data and doesn't make the call for the wdDoInit() method.
The question is:
How do I force the view to refresh all the data or call again the wdDoInit() method?
Thank you for your helpAida,
Lets say you have two components C1 and C2 and you want method from C1 to be available in C2 then follow these steps:-
1) Goto the Interface Controller of C1 and create a method there lets say doSomething
2) Then goto C2. There you can see Used Web Dynpro Components --> Right click Add Used Component --> Give some name say C1Comp --> Click browse and select C1 --> Click Finish.
3) Next goto Component Controller of C2 --> Properties --> Click Add and check if C1 is added. If not then select the checkbox and select OK.
4) Now goto Implementation tab of C2 and lets say wdDoInit you can write following code:-
wdThis.wdGetC1CompInterface().doSomething();
Chintan -
Not able to refresh the data in a table
Hi In my application i fill data in a table on clikc of a button ..
Following are the line of code i have user
RichColumn richcol = (RichColumn)userTableData.getChildren().get(0); (fetch the first column of my table)
richcol.getChildren().add(reportedByLabel); (reportedByLabel is a object of RichInputText)
AdfFacesContext adfContext1 = AdfFacesContext.getCurrentInstance();
adfContext1.addPartialTarget(richcol);
adfContext1.addPartialTarget(userTableData);
But on submit of that button table data is not refreshed after adding partial trigger on that table as well as that column also .... any idea??
Edited by: Shubhangi m on Jan 27, 2011 3:50 AMHi,
The Code that you have shown adds an additional inputText component to the first column of a table.
Is that your intention?
If yes, please use the following code snippet to achieve your functionality:
JSPX Code:
<af:form id="f1">
<af:commandButton text="Add Column" id="cb1"
actionListener="#{EmployeesTableBean.onAddColumn}"/>
<af:table value="#{bindings.Employees.collectionModel}" var="row"
rows="#{bindings.Employees.rangeSize}"
emptyText="#{bindings.Employees.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.Employees.rangeSize}"
rowBandingInterval="0"
selectedRowKeys="#{bindings.Employees.collectionModel.selectedRow}"
selectionListener="#{bindings.Employees.collectionModel.makeCurrent}"
rowSelection="single" id="t1"
binding="#{EmployeesTableBean.table}">
<af:column sortProperty="EmployeeId" sortable="false"
headerText="#{bindings.Employees.hints.EmployeeId.label}"
id="c1">
<af:outputText value="#{row.EmployeeId}" id="ot2">
<af:convertNumber groupingUsed="false"
pattern="#{bindings.Employees.hints.EmployeeId.format}"/>
</af:outputText>
</af:column>
<af:column sortProperty="FirstName" sortable="false"
headerText="#{bindings.Employees.hints.FirstName.label}"
id="c2">
<af:outputText value="#{row.FirstName}" id="ot1"/>
</af:column>
<af:column sortProperty="LastName" sortable="false"
headerText="#{bindings.Employees.hints.LastName.label}"
id="c3">
<af:outputText value="#{row.LastName}" id="ot3"/>
</af:column>
</af:table>
</af:form>
Bean:
public class EmployeesTableBean {
private RichTable table;
public EmployeesTableBean() {
public void setTable(RichTable table) {
this.table = table;
public RichTable getTable() {
return table;
public void onAddColumn(ActionEvent actionEvent) {
RichInputText newRichInputText = new RichInputText();
newRichInputText.setId("new");
newRichInputText.setValue("Name:");
RichColumn richcol = (RichColumn)table.getChildren().get(0);
richcol.getChildren().add(newRichInputText);
AdfFacesContext adfContext1 = AdfFacesContext.getCurrentInstance();
adfContext1.addPartialTarget(table);
Thanks,
Navaneeth -
Not having to refresh the data in the main report but only in the subreport
Hi SAP,
I have a report that uses a stored procedure in the main report and uses regular database tables in the subreport. The data returned from the stored procedure reports information from the month-end database (a cutoff point from the previous month's numbers) while the subreport reports information from the live database. This report gets run everyday to show the changes in numbers from the live database. Obviously the numbers from the month-end database remainds static until the next month's cutoff database is created.
My problem is that everyday when I run the report, the data needs to refresh from both the stored procedure in the main report and the live database tables in the subreport. How can I leave the data returned from the stored procedure static or as is without refreshing the stored procedure returned data and just have the subreport data refresh itself? The stored procedure really puts a strain on the database and I would like to cut-out the time to process the report as well. Does anyone have any ideas?
ZackHi Zack,
Try the following under Report options.
1. Clear the check box of "Verify Stored Procedures on First Refresh" in the Main report.
2. Select the check box of "Verify on First Refresh" in the sub report.
Hope this helps. -
Can not refresh ValueObject after altering database table
Hello All,
In FB4, in order to refresh a service, I used to
- select a service operation
- select configure return type
- select auto-detect
- hit next and on the follow page select the existing ValueObject
...it would update.
As far as I can see, this does not work in FB4.5. Instead, after selecting auto-detect and clicking next:
There was an error while invoking the operation. Check your operation inputs or server code and try invoking the operation again.
Reason: Warning: mysqli_stmt_bind_result(): Number of bind variables doesn't match number of fields in prepared statement in...
Is there a way to refresh a ValueObject. Clicking refresh is a no go.
Thanks for your help!
Jhey jay. did you ever figure out how to update your valueObject? I just posted a similar discussion "changing php-service in FD breaks AS3 service class and valueObjects" here: http://forums.adobe.com/thread/882288
maybe we'll get a reply.... -
Can not refresh contents of finder windows
I can not get my finder windows to refresh their contents. My picture folder is the one that really bothers me. When I am trying to upload pictures to the internet, the picture folder is never accurate. I have tried the refresh finder apple script, restarting the computer, opening and closing the window, nothing seems to work.
The content is there, when I search for a specific picture file it is there, but it is not located in the right subfolder. I download and manage my pictures on kodak easyshare.Hi there,
The content is there, when I search for a specific picture file it is there, but it is not located in the right subfolder.
Hmmm, are you saying something is moving them? Or the Finder isn't opening them to the right folder?
Have you tried this one...
http://www.versiontracker.com/dyn/moreinfo/macosx/10958253
Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions...
Move this file to the desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
reboot when it completes.
Maybe you are looking for
-
Fast Refresh mview performance
Hi, I'm actually facing with Fast Refresh Mview performace problems and i would like to know what is the possible improvments for the fast refresh procedure: - base table is 1 500 000 000 rows partitions by day , subparttion by has (4) - mlog partiti
-
My webcam is not detected on my macbook pro 2010
Hi everyone, my macbook pro doesn't recognize the webcam even in the system. Also I do have the windows7 also on the laptop. I wonder if it is the cause on the problem. Should I delete the windows7. I bought the laptop from my friend and he cannot re
-
I created my apple ID account about 5 years ago when I was in high school. I just bought a new mac and iTunes won't allow me to make purchases without answering security questions. Is there any way that I can get the answers to the security questio
-
Accessing ServletContext from Java class Data Control
I'm writing some business service classes as plain old java classes that will be bound to a JSP using ADF and STRUTS. The business logic requires the real path of the servlet context to access a file. How do I call servletContext.getRealPath("/WEB-IN
-
Search forums doesn't work for me
... I wanted to see if anybody else has this problem -- but umm... I can't search it. This is the error I get: An unexpected error has occurred This functionality has been disabled by your administrator.