REFRESH button in Classical report
Hi,
We have one classical interactive report using write statement and we would like add refresh button, so that user need not execute the report from initial screen.
I have added refresh button in GUI and wrote in at user command also, but still not working. When i added refresh button in another ALV report it was working fine.
Is that refresh button will work for write command report? if possible how can we acheive this?
Hi,
It should work.
Define a button in GUI Status with FCODE 'REFRESH' (or whatever)
in At USER-COMMAND event do:
- get new data from DB
- output new data
Make sure you have the start-of-selection and end-of-selection events in the program.
If you didn't figure it out by now, post your code and I'll have a look at it.
regards.
Similar Messages
-
Hiding refresh button in Webi Report
Hello experts,
I would like to hide 'refresh' button on webi report in XI 3.1. One way to do this is using rights which I don't intend to use at this stage.
Do we have any other way out to do this task?
Many thanks in advance
Regards,
JohnOptions:
a) roll your own viewer/portal - probably the safest bet, although a bit unwieldy if Infoview works fine and you only want to make this specific change
b) make changes to Infoview's javascript files that render the toolbar buttons - entirely unsupported by SAP as well as a maintenance headache during upgrades
c) ...revisit your reasons for not being able to disable refresh of the report to users - surely there's a security matrix that satisfies your requirement. If there isn't (meaning that, for whatever reason you need these users to refresh against this content area in normal scenarios but want it disabled for this portion of your workflow) - then there are kludgy "work arounds" like adding/removing the user to/from a "no refresh" group you've created in the CMC, programmatically, when running the report(s)
good luck -
Adding button in classical report
Hi All,
I have a requirement to add a button in the Classical report.
Iam new to abap.can anyone please guide me regarding this?
Thanks in advancehi,
if you use reuse alv grid. you can define your button at pf status. here the example :
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_pf_status_set = 'MY_PF_STATUS'
i_callback_user_command = 'MY_USER_COMMAND'
then :
FORM my_pf_status USING it_extab TYPE slis_t_extab.
SET PF-STATUS 'MY_PF_STATUS'.
ENDFORM. "MY_PF_STATUS
FORM my_user_command USING ip_ucomm TYPE sy-ucomm
ip_selfield TYPE slis_selfield.
CASE ip_ucomm.
WHEN 'VBELN'.
SET PARAMETER ID 'AUN' FIELD ip_sellfield-value.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
ENDCASE.
CLEAR : ip_ucomm.
ip_selfield-refresh =
ip_selfield-col_stable =
ip_selfield-row_stable = 'X'.
ENDFORM.
if you use : write for output.
START-OF-SELECTION.
SET PF-STATUS 'DENEME'.
WRITE : 'EXAMPLE'.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'EXAM'.
BREAK-POINT.
ENDCASE.
if you use Class for ALV u can find more info at here : [OO ALV Reference|http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907] -
Disable/Hide the Refresh Button in Child report
Hi All,
Our Environment is BOXI-R2;
We have a Master Report calling a Child Report (based on Open Document);
Our requirement is to hide the" Refresh Button "in the child report Layout
we tried using "hideRefresh=true"
but the child report is not responding to the above clause
Help us in this,
if this is a BUG in XI R2, let us know the Service Pack details
ThanksJoe , Thanks for your Inputs..
our master report has the aggregated Measure , when the user clicks on this , it has to open a child report (with paramters from master report).
We are aware of customizing "viewer.js " file (under BO install home) with "refreshDocIcon = null".
But is this the only solution to hide the refresh button in the child report ?
SInce its already a PRODUCTION environment, our customer won't allow to change the standard settings of the product.
Thanks -
How to get add/edit button in classic report
Hi,
Iam trying to built a classic report,but here i need to have add/edit button.How can i achieve this in classic reports?
I know this add/edit button with a pencil on note will come through the interactive report.
But here iam trying to build a page same as the sample application Orders tab i.e. My Orders page.Here he created a classic report with alternating rows but has an add/edit button to it.How could that be achieved??
Can Anyone help me in this regard to built the My orders page including the add/edit navigation getting to order for items.How can tat sample application of My orders built?
TIA,
Regards,
Kranthi.
Edited by: Kranthi.K on Sep 29, 2009 12:38 AMOne more doubt is
But here iam trying to build a page same as the sample application Orders tab i.e. My Orders page and when we hit add/edit image it directs us to the My orders info and order items.
How can we build that page of My orders info and order items.Can anyone guide me through the steps the sample is created.
I tried many times with master detail,but dint achieve what the default Sample Application has been done.
Thanks in Advance
Edited by: Kranthi.K on Sep 29, 2009 4:54 AM -
How to disable refresh button in webi reports in BOXI3.1SP2-Java SDK
Hi all,
We have integrated Java with BO, here end users will give parameters through java screen. After submitting all the parameters webi reports will opens in separate window.
Here requirement is end users should pass the parameters from java screen and they should able to save the report in to excel/PDF.
Refresh/edit buttons should disable/hide in the webi report.
below is the sample url we are using in the java.
http://" + CMS + ":8080/ OpenDocument/opendoc/openDocument.jsp?"+ "iDocID=" +ReportID + "&sType=wid&sRefresh=N&sWindow=New&lsSEnter List Name: =+List&token=" + token
we tried with using &buttonrefresh=hide in above URL.
Note: We are also having hyperlink reports in the Webi.
Please provide me inputs to disable refresh button.
Thanks,
SubashHi,
why do not set this over the authorization scheme? Just deny your users the right to refresh/edit the report.
Regards,
Stratos -
Not required refresh button on link report
Hi all..
i have link concept in my report.
i linked Main report to Link report.
where i don't require refresh button on my link report.
how can i achieve this?hi Remarks,
thanks for answer,
however , i had tried same way , but i am linked report giving me error "not having sufficient rights to refresh"
thanks -
Add new line in ALV report and Refresh button
How to add a new line in a ALV report?
How to add a refresh button in a report?Hi,
First of all u have to Create ur own PF-status and Assign Fcode e.g 'INSERTROW'.
So, whenevr you will click Insertrow button it will be triggered in your User Command and then just Append the blank line in your Final Internal Table.
And Refresh Icon will be there by default...
To Trigger it You have to write rs_selfield-refresh = 'X'
You can also follow the below link...
Try it.
Link:[http://wiki.sdn.sap.com/wiki/display/ABAP/ALVeasytutorial].
Regards
Arbind -
Hi SAP gurus,
My requirement is to add a button on the Output of a Classical report. When any line is selected on the report and the changes have been made in the detail, after coming back to the main list, I should be able to refresh the data by clicking the refresh button.
I used PF-status to put the refresh button on the report but I am not able to drill down into the lines.
Could you help me with this.
Thanks,
Reeta.Go through the sample report.
REPORT YMS_INTERACTIVETEST LINE-SIZE 50 NO STANDARD PAGE HEADING.
TABLES: VBAP,KNA1,VBAK.
SELECT-OPTIONS: CUST FOR KNA1-KUNNR.
DATA: BEGIN OF ITAB OCCURS 0,
KUNNR LIKE KNA1-KUNNR,
NAME1 LIKE KNA1-NAME1,
VBELN LIKE VBAK-VBELN,
AUDAT LIKE VBAK-AUDAT,
AUART LIKE VBAK-AUART,
POSNR LIKE VBAP-POSNR,
POSAR LIKE VBAP-POSAR,
END OF ITAB.
DATA: ITAB1 LIKE ITAB OCCURS 0 WITH HEADER LINE.
INITIALIZATION.
START-OF-SELECTION.
SELECT KNA1~KUNNR KNA1~NAME1 INTO CORRESPONDING FIELDS OF TABLE ITAB1
FROM KNA1 WHERE KNA1~KUNNR IN CUST.
LOOP AT ITAB1.
WRITE:/10 ITAB1-KUNNR HOTSPOT, 30 ITAB1-NAME1.
HIDE: ITAB1-KUNNR.
ENDLOOP.
AT LINE-SELECTION.
CASE SY-LSIND.
WHEN '1'.
SELECT KNA1~KUNNR VBAK~VBELN VBAK~AUDAT VBAK~ERDAT INTO CORRESPONDING FIELDS OF TABLE ITAB1
FROM KNA1 INNER JOIN VBAK ON KNA1~KUNNR = VBAK~KUNNR.
LOOP AT ITAB1.
WRITE:/ ITAB1-VBELN HOTSPOT, ITAB1-AUDAT, ITAB1-AUART.
HIDE: ITAB1-VBELN, ITAB1-AUDAT, ITAB1-AUART.
ENDLOOP.
WHEN '2'.
SELECT VBAK~VBELN VBAP~POSNR VBAP~POSAR
INTO CORRESPONDING FIELDS OF TABLE ITAB1 FROM VBAK INNER JOIN VBAP ON VBAK~VBELN = VBAP~VBELN.
LOOP AT ITAB1.
WRITE:/ ITAB1-POSNR, ITAB1-POSAR.
ENDLOOP.
ENDCASE.
TOP-OF-PAGE.
WRITE:/ SY-VLINE,TEXT-001 COLOR COL_NEGATIVE.
ULINE. -
Refresh Classical report/basic list
Hi,
I have created a classical report/basic list where user can select check boxes and adjacent rows should be deleted. But after the action, I wish to refresh the report and remove the selected lines from displaying.
Please let me know how to achieve this.
Thanks in advance.
NitinHi Nitin,
Check the following program.
Here on pressing the delete push button(FCODE: DELETE) it will delete all
rows which has adjacent checkboxes checked.
REPORT ztest_list_processing NO STANDARD PAGE HEADING .
TYPES: BEGIN OF ty_tab,
delete,
f1(3) TYPE c,
f2(3) TYPE c,
f3(3) TYPE c,
END OF ty_tab.
DATA: it_tab TYPE TABLE OF ty_tab,
wa_tab TYPE ty_tab.
DATA: w_delete TYPE c,
w_lines TYPE i,
w_ind TYPE i.
wa_tab-f1 = '111'.
wa_tab-f2 = 'ABC'.
wa_tab-f3 = '123'.
APPEND wa_tab TO it_tab.
wa_tab-f1 = '222'.
wa_tab-f2 = 'DEF'.
wa_tab-f3 = '456'.
APPEND wa_tab TO it_tab.
wa_tab-f1 = '333'.
wa_tab-f2 = 'GHI'.
wa_tab-f3 = '789'.
APPEND wa_tab TO it_tab.
wa_tab-f1 = '444'.
wa_tab-f2 = 'JKL'.
wa_tab-f3 = '987'.
APPEND wa_tab TO it_tab.
wa_tab-f1 = '555'.
wa_tab-f2 = 'MNO'.
wa_tab-f3 = '654'.
APPEND wa_tab TO it_tab.
SET PF-STATUS '100'. "Contains Delete button
PERFORM print_output.
"Logic which you can implement
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'DELETE'.
DESCRIBE TABLE it_tab LINES w_lines.
DO w_lines TIMES. "To read all rows
CLEAR: wa_tab.
READ LINE w_ind FIELD VALUE wa_tab-delete
wa_tab-f1. "Getting the values
IF wa_tab-delete EQ 'X'. "Delete when check box is 'X'
DELETE it_tab WHERE f1 = wa_tab-f1.
ENDIF.
ADD 1 TO w_ind."Index for next line
ENDDO.
IF it_tab IS INITIAL.
WRITE: / 'There are no data in the table'.
ELSE.
PERFORM print_output. "Reprint the updated data(like refreshing)
ENDIF.
"Modified the existing Back button in standard Toolbar so that on
"pressin the back button it will come to program and not to
"previous displayed list
WHEN '&BACK'.
LEAVE SCREEN.
ENDCASE.
*& Form print_output
* text
* --> p1 text
* <-- p2 text
FORM print_output.
LOOP AT it_tab INTO wa_tab.
WRITE:/ wa_tab-delete AS CHECKBOX INPUT ON, "Display as checkbox
wa_tab-f1,
wa_tab-f2,
wa_tab-f3.
IF sy-tabix EQ 1.
w_ind = sy-linno. "Get the line position of first row
ENDIF.
ENDLOOP.
Hope this helps you.
Regards,
Manoj Kumar P -
Hi all...
I m having a requirement to refresh a classical report from the output screen itself..
From the basic list, if I select a row and click on the detailed list button in application tool bar, a custom screen will be called. In that screen I am modifying some values and saving it. Again if i click back button, the modified value and related calculations should be updated in the basic list.....
The values which I am modifying in the screen are not to be directly updated in the list. Based on the values in the screen there are some computations ( Which are already there in the report)..
If refreshing is not possible, I need to run the report one more time to get the new values in the out put list, which is not desirable.....
Please solve this....
Thanks in advance,
JJ.Hi Reeta,
I got the requirement to migrate a report in old system (SAP 4.6c) to ECC6.0. The functionality of refreshing the report was not there in the old system, I have to incorporate that.
The old program was not modularized.
I finally myself modularized the code into different sub-routines and I identified that which sub-routines are exactly carrying out the report calculations and display, and I called the same set of two sub-routines under the back button of the detailed screen....
Before this I directly tried with submit to the same program under the back button of detailed list screen...though it is not a good solution it worked fine up to refreshing the report, but if we hit the back button in the refreshed basic list, it will directly go to the easy access screen instead of the selection screen..
So, I followed the modularization of old code and called the particular sub-routines....
-JJ. -
Classical Report on clicking button on ALV Report
I have a requirement where I have to display a classical report based on the user-click on a "custom button" on my ALV. I am unable to display the classical report. Please help with code example..
Hi,
See the example.Change the code according to your requirement.
*& Report ZDEMO_ALVGRID *
*& Example of a simple ALV Grid Report *
*& The basic requirement for this demo is to display a number of *
*& fields from the EKKO table. *
REPORT zdemo_alvgrid .
TABLES: ekko.
type-pools: slis. "ALV Declarations
*Data Declaration
TYPES: BEGIN OF t_ekko,
ebeln TYPE ekpo-ebeln,
ebelp TYPE ekpo-ebelp,
statu TYPE ekpo-statu,
aedat TYPE ekpo-aedat,
matnr TYPE ekpo-matnr,
menge TYPE ekpo-menge,
meins TYPE ekpo-meins,
netpr TYPE ekpo-netpr,
peinh TYPE ekpo-peinh,
END OF t_ekko.
DATA: it_ekko TYPE STANDARD TABLE OF t_ekko INITIAL SIZE 0,
wa_ekko TYPE t_ekko.
*ALV data declarations
data: fieldcatalog type slis_t_fieldcat_alv with header line,
gd_tab_group type slis_t_sp_group_alv,
gd_layout type slis_layout_alv,
gd_repid like sy-repid,
gt_events type slis_t_event,
gd_prntparams type slis_print_alv.
*Start-of-selection.
START-OF-SELECTION.
perform data_retrieval.
perform build_fieldcatalog.
perform build_layout.
perform build_events.
perform build_print_params.
perform display_alv_report.
*& Form BUILD_FIELDCATALOG
Build Fieldcatalog for ALV Report
form build_fieldcatalog.
There are a number of ways to create a fieldcat.
For the purpose of this example i will build the fieldcatalog manualy
by populating the internal table fields individually and then
appending the rows. This method can be the most time consuming but can
also allow you more control of the final product.
Beware though, you need to ensure that all fields required are
populated. When using some of functionality available via ALV, such as
total. You may need to provide more information than if you were
simply displaying the result
I.e. Field type may be required in-order for
the 'TOTAL' function to work.
fieldcatalog-fieldname = 'EBELN'.
fieldcatalog-seltext_m = 'Purchase Order'.
fieldcatalog-col_pos = 0.
fieldcatalog-outputlen = 10.
fieldcatalog-emphasize = 'X'.
fieldcatalog-key = 'X'.
fieldcatalog-do_sum = 'X'.
fieldcatalog-no_zero = 'X'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'EBELP'.
fieldcatalog-seltext_m = 'PO Item'.
fieldcatalog-col_pos = 1.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'STATU'.
fieldcatalog-seltext_m = 'Status'.
fieldcatalog-col_pos = 2.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'AEDAT'.
fieldcatalog-seltext_m = 'Item change date'.
fieldcatalog-col_pos = 3.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MATNR'.
fieldcatalog-seltext_m = 'Material Number'.
fieldcatalog-col_pos = 4.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MENGE'.
fieldcatalog-seltext_m = 'PO quantity'.
fieldcatalog-col_pos = 5.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'MEINS'.
fieldcatalog-seltext_m = 'Order Unit'.
fieldcatalog-col_pos = 6.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'NETPR'.
fieldcatalog-seltext_m = 'Net Price'.
fieldcatalog-col_pos = 7.
fieldcatalog-outputlen = 15.
fieldcatalog-do_sum = 'X'.
fieldcatalog-datatype = 'CURR'.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
fieldcatalog-fieldname = 'PEINH'.
fieldcatalog-seltext_m = 'Price Unit'.
fieldcatalog-col_pos = 8.
append fieldcatalog to fieldcatalog.
clear fieldcatalog.
endform. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
Build layout for ALV grid report
form build_layout.
gd_layout-no_input = 'X'.
gd_layout-colwidth_optimize = 'X'.
gd_layout-totals_text = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'.
endform. " BUILD_LAYOUT
*& Form DISPLAY_ALV_REPORT
Display report using ALV grid
form display_alv_report.
gd_repid = sy-repid.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
it_events = gt_events
is_print = gd_prntparams
i_save = 'X'
is_variant = z_template
tables
t_outtab = it_ekko
exceptions
program_error = 1
others = 2.
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. " DISPLAY_ALV_REPORT
*& Form DATA_RETRIEVAL
Retrieve data form EKPO table and populate itab it_ekko
form data_retrieval.
select ebeln ebelp statu aedat matnr menge meins netpr peinh
up to 10 rows
from ekpo
into table it_ekko.
endform. " DATA_RETRIEVAL
Form TOP-OF-PAGE *
ALV Report Header *
Form top-of-page.
*ALV Header declarations
data: t_header type slis_t_listheader,
wa_header type slis_listheader,
t_line like wa_header-info,
ld_lines type i,
ld_linesc(10) type c.
Title
wa_header-typ = 'H'.
wa_header-info = 'EKKO Table Report'.
append wa_header to t_header.
clear wa_header.
Date
wa_header-typ = 'S'.
wa_header-key = 'Date: '.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO wa_header-info. "todays date
append wa_header to t_header.
clear: wa_header.
Total No. of Records Selected
describe table it_ekko lines ld_lines.
ld_linesc = ld_lines.
concatenate 'Total No. of Records Selected: ' ld_linesc
into t_line separated by space.
wa_header-typ = 'A'.
wa_header-info = t_line.
append wa_header to t_header.
clear: wa_header, t_line.
call function 'REUSE_ALV_COMMENTARY_WRITE'
exporting
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
endform.
FORM USER_COMMAND *
--> R_UCOMM *
--> RS_SELFIELD *
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
Check function code
CASE r_ucomm.
WHEN '&IC1'.
Check field clicked on within ALVgrid report
IF rs_selfield-fieldname = 'EBELN'.
Read data table, using index of row user clicked on
READ TABLE it_ekko INTO wa_ekko INDEX rs_selfield-tabindex.
Set parameter ID for transaction screen field
SET PARAMETER ID 'BES' FIELD wa_ekko-ebeln.
Sxecute transaction ME23N, and skip initial data entry screen
CALL TRANSACTION 'ME23N' AND SKIP FIRST SCREEN.
ENDIF.
ENDCASE.
ENDFORM.
*& Form BUILD_EVENTS
Build events table
form build_events.
data: ls_event type slis_alv_event.
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = gt_events[].
read table gt_events with key name = slis_ev_end_of_page
into ls_event.
if sy-subrc = 0.
move 'END_OF_PAGE' to ls_event-form.
append ls_event to gt_events.
endif.
read table gt_events with key name = slis_ev_end_of_list
into ls_event.
if sy-subrc = 0.
move 'END_OF_LIST' to ls_event-form.
append ls_event to gt_events.
endif.
endform. " BUILD_EVENTS
*& Form BUILD_PRINT_PARAMS
Setup print parameters
form build_print_params.
gd_prntparams-reserve_lines = '3'. "Lines reserved for footer
gd_prntparams-no_coverpage = 'X'.
endform. " BUILD_PRINT_PARAMS
*& Form END_OF_PAGE
form END_OF_PAGE.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
write: sy-uline(50).
skip.
write:/40 'Page:', sy-pagno .
endform.
*& Form END_OF_LIST
form END_OF_LIST.
data: listwidth type i,
ld_pagepos(10) type c,
ld_page(10) type c.
skip.
write:/40 'Page:', sy-pagno .
endform.
Pls. reward if useful... -
(Classic) Report losing pagination on partial page refresh - APEX feature request
I have a page with both an Interactive Report and some classic Report regions.
Based on user updates, there are many occasions where I need to do a partial page refresh.
Thanks to plugin http://www.apex-plugin.com/oracle-apex-plugins/dynamic-action-plugin/refresh-interactive-report-1.0_361.html
I'm able to refresh my IR, but not my classic report (unless I do a submit of the whole page) without losing pagination.
Request: Will a Dynamic action 'Refresh without losing pagination' be part of future apex versions?
Now, in apex 4.2, is there another work around available for classic reports?
(I use 'submit page' now as action, but it's at least a second slower as a partial refresh, and because I need it on every user update, this second becomes a big addition to user frustration).
Thanks, JPHere is the solution for your problem:
https://apex.oracle.com/pls/apex/f?p=31517:243
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
https://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494 -
Refresh classic report based on select list value selected
hello,
can anyone please help me out with this issue. I have a parameterized classic report based on a select list and I want to refresh this report whenever the select list value is changed. I am using oracle apex version 3.2. i just want to have a javascript function onchange event for the select list which refreshes my report whenever a value is selected.
My select list item is p1_datastore
select distinct datastore d,datastore r from my_table1 order by 1;
My classic report query is
select * from my_table2 where datastore = :p1_datastore order by last_updated_dt desc;
****************************************************thanks,
ortoncan anyone please help me out with this issue.
thanks,
orton -
Report prompting Report Parameters on clicking Viewer Refresh button
Hi,
We are using Crystal Reports XI release 2 for launching the reports. Dot net Web forms are used for launching the reports. We are using SQL server stored procedure for getting the report data. Report Parameter values are assigned programmatically. Report is launching fine and data are displayed perfectly.
The problem is when I click on the Refresh button available in the report viewer it prompts for all the report parameters to enter the corresponding values. To overcome this issue I tried to use the u201CReuseParameterValuesOnRefreshu201D programmatically and in crystal report viewer control, but still it is displaying all the report parameters details.
To overcome this issue is there any settings available in the crystal report designer or programmatically this can be handled ?
I had verified the followings
1. Report navigations are working fine (move previous, next)
2. Report export is working fine
3. Report Printing is working fine
Crystal Reports Version Used
Cystal Reports XI Release 2 Developer Edition (Product Version : 11.5.0.313)
Operating System :
Windows Server 2003 Standard Edition (Service Pack 2)You are using the original release of CR XI R2.
Download SP4 full build, requires an uninstall first and then install SP 5 and 6 and test again.
To get to the download page click on the Businessobjects tab above and SAP Crystal Report on the left side and then downloads.
Thank you
Don
Maybe you are looking for
-
TS1717 Ipad freezes in control panel when i go to itunes
I tried to chnge my login on control panel, but the ipad now freezes on the first page . I also cannot update apps or install new ones, it hung on getting password connection when i accidently started to purchase lives in candy crush.
-
Displaying pdf from file system in OA framework pages
Hi, If anyone could help me with this I would be very grateful. We have a number of pdfs containing sensitive information, held on our Unix file system in directories not publicly available. I want to create an OA framework page which takes the name
-
When adding audio to my webpage do I have to add a photo as well?
Hello, I just set up my website using iweb and it was really fun and easy. I added an audio file to one of my pages and it required me to add a photo or it wouldn't add the song. Can this be changed? Thanks, Chad Powerbook G4 1.5 Mac OS X (10.4.2)
-
my homepage is correctly set in firefox, but i can't seem to do anything to keep chrome://ntsd-c/content/newtab/newtab.html from opening first, then i must open the yahoo tab second Thanks
-
Hi I have a Problem with Business Catalyst within Dreamweaver. The programme itself works fine but when i click anything to do with Business Catalyst it freezes and shuts the programme down. I have re-installed several times and tried on both my PC a