Refresh ECC 6.0 do I need to refresh associated BW 7.0

I am refreshing ECC 6.0 EHP4 Oil&Gas and it is attached to associated BW 7.0.
So if I refresh my TEST ECC from my INT (QA) ECC system is there a need to also refresh BW?
I don't see any need to refresh associated BW 7.0 since the refresh will reSID ECC system as long as we stop the queue and then perform a full extract again.
Is there anything else or is there a note or procedure to perform any BW objects in the ECC system prior to reanabling the queues and extracts in BW?
Thanks
Mikie

ECC refresh is a different and separate task. BW 7.0 refresh is not a mandetory one that you have to do when ECC refresh is going on.
What all you have to do is, When ECC refresh is happened, BI source system connection would be damaged.
That time, you have to restore the connection by making both the systems modifable.
After that just check the extraction whether it is normal or not.
Hope this would help you.

Similar Messages

Debug ECC 4.0 from Portal- need to put External debugger

Hi,
Can anyone who was earlier working in ECC 4.0 tell me how to add an external debugger or debug Smartform from Portal.
External debugger is an easy option when it comes to ECC 6.0 but there is an issue for which i need to debug ECC 4.0 and i can't find Ext. debugger icon in the Function tool bar.
Things i have tried till now:
1. Even master weapon <Do ...enddo- sm51> didn't work
Thanks,
Rohan

(sorry for the double answer. Klaus managed to post just before me :=)
Hello Deep,
check out help.sap.com, http://help.sap.com/saphelp_nw04/helpdata/en/cd/8a424089ff2571e10000000a155106/frameset.htm
In addition search the forum for similar questions, there are quite a lot of good answers in the threads.
regards,
Jørgen
Message was edited by: Jørgen Ruud

SAP BW 3.5 with ECC 5.0 Installation Instructions Needed

All BW Experts,
I would like to install the trial version of SAP BW 3.5 and IDES (ECC 5.0) on my Windows 2003 Server. I would really appreciate if anyone can send me the installation instructions to my email id: [email protected] . I will assign maximum points to the email that best helps me make a smooth installation, so please don't forget to include any additional tips/tricks/workarounds I may need to know to avoid common bottlenecks/issues during installation. Appreciate your help in advance.
PS: I am still a SAP student so I do not have access to the SAP Service Marketplace, so please don't ask me to look in there for the instructions.
Thanks
Kumar P.
Added note at bottom in response to the first suggestion.
Message was edited by: Kumar P

Hi Kumar,
You Can dowload The Instalation Documents from
https://websmp107.sap-ag.de/nw04installation
Thanks,
-Vijay

1405 Replicate Account Hierarchy from ECC to C4C - new content needed ?

In 1405 integrations in C4C, a new feature provides Account Hierarchy replication from ECC.
We were implementing in 1402 and got upgraded so C4C side should be fine.
How do we get those new content - IDOC type, load report, mappings, etc. ?

The IDOC types will be in the Add-On. The updated integration guide includes the configuration. I just downloaded it from SMP yesterday and noticed that the new customer hierarchy loading has been added.

ECC PO Realese Stratagy details need to be populated in SRM Shopping Cart

FOLKS,
We are configuring SRM7.0 with ECC6 ( Ehp4) having Classic Scenario
We don't want to use Approval process for Shopping Cart, since it will be in ECC PO. The ECC PO in relevant document tab page as a follow on document in Shopping Cart shows only some key fields like Qty, Supplier, Price..etc.
But Requester ( Shopping Cart creater ) want to see in the the Release Status of ECC PO and to whom it is pending in the SHOPPING CART ITSELF (along with other fields of ECC PO in relevant document tab page) .
Can anyone please suggest/confirm me, whether it is possible or not ? If yes , which BADI..or enhancement ?
Thanks
Regards
NAP

Hi,
Yes. You can enhance WebDynpro UI.
Here is some basic references.
6 series on User Interface flexibility in WebDynpro ABAP.
http://www.sdn.sap.com/irj/scn/advancedsearch?query=%22abapUIFlexibility%22
ABAP UI Flexibility Part 1: Demo Overview
ABAP UI Flexibility Part 2: Floorplan Manager
ABAP UI Flexibility Part 3: Feeder Classes
ABAP UI Flexibility Part 4: BADIs
ABAP UI Flexibility Part 5: BRF+
ABAP UI Flexibility Part 6: Looking Ahead to 7.02
Regards,
Masa

Novice user needs help with associations (strange problem)

Background
=======
I am in the process of updating several Hyperion reports from version 8.3 to 9.3.
Each reports contains a number of sections/frames (eg. Home, Segments, Basic, Location, etc), and each frame contains several items - tables, pivot tables and charts.
Three out of the four reports are working perfectly, and when I connect to each using Dashboard Studio (DS) I can see that the associations for all the items are assigned correctly.
The problem
========
Report 4 only has associations assigned to two of the sections, but the basic functionality (selecting stuff to update charts and tables etc) is working.
I now need to enable the "export" and "sort" buttons in the remaining sections and the only way to do this is to associate the remaining sections using DS. After doing this via the "make a best-guess association" button, the basic functionality is now broken - many charts, pivots and tables have had their visible properties turned off.
Observations
=========
All four reports have the following lines of code at the top of each section:
if (ActiveDocument.Qiq_blnTemplateInitialized)
{ ActiveDocument.Qiq_clsGlobals.Qiq_base_Frame_OnActivate(this) }
If I remove this code in report 4 the basic functionality is restored but there are now issues with the drop-down lists not returning to their initial (unselected) states.
So I think the issue is related to associations and frames. Any thoughts?
Thankyou
Jon

I would suggest you try a fresh installation of Leopard on your computer. Make sure you back-up your files that you want to keep before proceeding.
Use the install disc that came with your computer, either by inserting the disc in your disc drive and restarting the computer while holding down the c key, or by initiating the installer from the window that opens automatically when the disc is inserted.
Follow the prompts once presented with the installation environment, but watch for an "Options" button in the lower-left corner of the window. When presented with this, choose "Erase & Install" and select "Mac OS Extended (Journaling)". Continue to the next screen.
Look for the "Customize" button in the lower-left corner. With this screen, you're allowed to select what's installed on your computer. You likely don't need all the printer drivers, and you may or may not need the extra languages packs. X11 is your choice, but I choose to have it installed despite never using it.
Start the installation, and when the installer starts "verifying" your install disc, click the Skip button. Don't interfere with the installation process, and the computer will restart on its own when finished.
Setup your computer as before, and then use the Tiger install disc to re-install your iLife applications. You may contact me directly if you'd like to ask questions (alter the following address): spam [at] emoore [dot] org

ST22 Dump - Need to find associated proxy XML

Hi,
I need to find the inbound proxy call (xml message), which has caused the ST22 dump. Can any of you tell me whether the transaction id or any other values from ST22 can be used to track the message unique?
Thanks,

HI Joe,
for any proxy call either inbound or outbound, you will find all the processed the messages in the SXMB_MONI transaction.
the messages which are processed successfully has the status and processed successfully but if there is any problem during the processing of message because of program dump then this message remains in the green flagged status. hence try to find out the green flagged status and check the error log for the same. you will find out the exact error message which is appearing in ST22.
you can also try to check the queue using smq2 transaction , if there is any dump while processing the message the followeing messages are got stuck as long as you are not deleting the first messages. from there also you can see the erroneous XML data.

Divorce - Free apps need to be associated with ex not me

When he goes to update an app, it wants my Apple ID and password. Fine when we were together but not so fine anymore. I know that once you download an app, the Apple ID stays with it. So, I deleted an app as a test from iTunes and from his iPhone. Then I went to the iTunes store and downloaded the same app under his Apple ID and password. Now, when I click on that app in the iTunes App library, it does show his Apple ID not mine. But, I can't get the app to move to his phone despite numerous syncs. If I click on the Apps tab on his phone and click the Sync Apps box, his apps will be replaced with what is in the library not what is already on his phone. I don't want to wipe out anything he already had on his phone. If I go to the App Store on his phone to redownload the app I deleted, it still shows MY Apple ID and wants MY password. I did do a transfer purchases from his iPhone but clicking the Sync App box makes me nervous. I also cannot drag from his library to his phone to try to put the app on that way.
Any advice? Is there a way to make this easier rather than one app at a time?
Thanks!

Go to "Settings" app (if you can) and got to "General" and scroll down to the bottom and go into "Reset". Then hit the button that says "Reset All Settings" and then click ok. if that doesn't do anything. try updating. This is not a widely reported problem so if the update doesn't fix it, it may be a problem with your phone.

Guidance or sample code needed or complex associations

I am a new developer to jdo/kodo. I understand most of the stuff I have read. What I can't seem to find are examples or a discussion of how to do the mapping, etc when your classes are associated with other classes. I'm taking the classic Order and Customer setup. You have a Order which has an association to a Customer and vice versa. Actually my model is a bit more complex than that, but knowing how to do two classes should point me in the right direction.
How to i create the schema mapping and metadata files in this case? I see how do it for a single class and given package and the whole project. However, what happens when I have some classes in one package and some in an other and they are related to each other? What's the order of operations?

I am new to the Windows programming environment (I'm running Windows 7).
I am looking for sample code that will do the following:
1.
12.
If you expect a useful answer here, you'll have to narrow your thread(s) to one specific
issue. Posting a (virtually) complete application specification is far too broad and
comprehensive for any one thread in these forums.
Pick *one* aspect of this project and describe what problems you're having writing the code.
Post a new thread for each specific problem.
As posted, you appear to be hoping to find code already completely written for this project.
Most sample code illustrates *one* task, not a dozen. If you aren't able or willing to do
the lion's share of the coding yourself, you may have to consider contracting a developer.
- Wayne

I need to create a Classic BADI definition in an ECC 6.0 Environment

Greetings all,
Let me start by saying that I work in a corporation with many SAP landscapes at various versions (4.7, ecc 6 etc.) We have an application developed in an ECC 6.0 environment which needs to be pushed down to some 4.7 environments. This development needs some BADIs defined to give the receiving systems some flexibility. Here comes the problem, 4.7 cannot handle New BADIs and ECC 6.0 will not allow me to create Classic BADI definitions. I've searched through notes to see if there is some kind of quick fix and I have not found any. So I appeal to you the enhancement forum. Is there a note? How else can I create something and give the non original systems the flexibility needed?
Thank You

Yes Michelle, you are misunderstanding. I am the Definer of the BADI, not the implementer. I am setting up the hook in the program. One can still implement a classic BADI in SE19 in ECC 6.0. What we are prevented from doing is defining a new Classic BADI. We are forced to define new BADIs.
Try this: Go to SE18, select BADI name and put in Ztestjunk. Now hit the create button:
Here is the error message you will get:
"Create" operation is possible only for enhancement spots
Message no. ENHANCEMENT269
Diagnosis
You wish to create a BAdI definition on the initial screen of the BAdI Builder.
System Response
It is not possible to directly create a BAdI definition. The BAdI definition can only be created as part of an enhancement spot.
Procedure
Either create an enhancement spot or process an enhancement spot that already exists. There you can create BAdI definitions as part of the enhancement spot.

Material Created/changed in ECC needs to be updated in thirdparty system

Hi Gurus,
I have a requirement. Please help me on this.
We are having a legacy system (Material Master)which needs to be replaced by ECC 6.0 and data needs to be sent to third party system via middleware as PI.
we also needs to extend message type(Matmas not sure which one we need to consider 01,02,03,04) with additional legacy 10 fields according to the client requirement.
Whenever a material is created/changed in ECC idoc needs to be sent to middleware and then to the thirdparty via middleware.
Please let me know how we can handle this interface. Thanks much.
Regards,
Sanjay

HI Janagar,
I understand you are saying the solution in one word. It would be really helpful if you can expedite the solution as i am handling interfaces for the first time. Thanks much.
Regards,
Sanjeev

ECC TO SRM-MDM CATALOG THROUGH SAP PI

We have a scenario where we are sending data from ECC to SRM-MDM Catalog through SAP PI and data is coming from ECC through proxy and sending to SRM u2013MDM catlog through file adapter. In ESR part we have used SAP defined standard service interfaces (CatalogueUpdateNotification as sender interface and MDMInfoRecordDataTransmission as a receiver interface). The mapping used is also standard one.
Now we have got requirement to send the data for vendor mat no, manufacturer field of info records from ECC to SRM-MDM catlog. But we are unable to find out these two fields in standard interfaces/messages. Can anybody guide us how to add these fields in the current data types or is there any other standard interfaces we can use.
Thanks in advance.

Hi Shiv,
Many thanks for your reply.
Since we're not using XI / PI scenario and this is an upgrade from SRM 5.5 to SRM 7, Iu2019m using the same approach that was already used in SRM 5.5 with CCM 2.0.
The idea is that the catalogue and all the records maintained need to be associated to a contract. So, I add the contract ID and the correspondent contract item in the import file, in addition to the supplier name, product ID, price information and so on. I mapped the contract ID with the field contract price.
In relation to the price information fields, as I want it to be visible for any user that accesses the product catalogue, I tried different approaches:
1.Using OCI Price information u2013 amount, currency, price base quantity and price base quantity UoM;
2.Using OCI Price contract u2013 amount, currency, price base quantity and price base quantity UoM;
The first approach didnu2019t work very well, as I was not able to see price information when accessing the catalogue. I could only see it once I transfer the items to the SC. In addition, this approach had one problem. The products were displayed but it was not possible to select the items one by one. To do that I needed to select all the items of the catalogue and after that the detail of the contract ID was displayed in every item, allowing me to choose the items that I want to select to my SC.
The second approach was better as the information was visible when accessing the SC and I was able to select all the items, one by one, as it should be. The main problem of this approach was that Iu2019m getting errors in the SC when the materials have stock u2013 u201CInterface data contains errorsu201D. Or alternatively, if the items didnu2019t have stock, the SC was possible, but when I tried to create a PO from that SC, It simply does not work.
So, can someone help me? Any ideas?
Thanks in advance.
Best regards,
Andreia

ECC Report

Hi Experts,
In our project we have created some ECC Reports. The names of report are
Application Report
BEE Report
Cost Center Report
Cost Center YTD Report
Material Analysis - MC.9
Purchase Orders By Vendor
Total Cash Flow Per Month Report
We have to write some thing about ECC Reports. We don't have to write any thing about the specific report. We have to write some thing in general about ECC Report.
Keeping this in view, can you please let me know, what is ECC Report? Why we need ECC Report.
Thanks,
G

Hi Sapna
Be specific in which report you want
Refer this
http://help.sap.com/saphelp_nw04/helpdata/en/61/7beb3cad744026e10000000a11405a/frameset.htm
In the left pane, every topic contains a list of standard reports
Regards
N Ganesh

Communication between ECC and CRM

Hello,
I am in phase of showing communication between SAP CRM 5.0 and ECC 6.0.
I am struggling with finding some simple transactions which are common in both, with which I can show correct connectivity between ECC and CRM.
I need to save some data from CRM and access the same via transaction within ECC, save some data via ECC and access it via CRM. I already established RFC link between ECC and CRM.
Probably communication between SD module of ECC with CRM.
Can you please help me out with this, a clue/correct direction will be of very helpful. Basically I want to know, what transaction I can use for same.
Any help is really appreciated.
Thanks
-Vishal

Hi Glenn,
I followed all steps in document mentioned above. In the end during execution of transaction I selected appropriate source and destination, when I click start transfer objects, it gets stuck in waiting phase.
Among those steps I was not able to perform step#10. Creating Subscriptions for OLTP. My ERP is not displaying this option under subscription wizard. Should it be reason for not starting transfer ? I also do not see ERP logon screen when I select transfer.
My another question is when transfer will complete, where I'll be able to see transferred objects within ERP database ?
Thanks
-Vishal

Query on Field exits in ECC 6.0

Hi All,
We have implemented field exits in SAP R/3 4.6c and now we have upgraded to ECC 6.0.
I need to know the following information:
Are field exits obsolete in ECC6.0?
Can we create new field exits in ECC 6.0 ?
Going forward, what is the alternative technology/concept to be used - enhancement sports, BADIs etc for field validations(or instead of field exits)?
Regards
Shiva

Hi,
Though it is obsolete, SAP does not say dont you field exit. You can still use field exit. You can still create field exits.
Whatever is already existing will definitely work. Creating a field exit is much more simpler and easy than the BADIs or Enhancement points.
Yes you are right, going forward, you will have to use BADIs or Enhancement points.
Regards,
Subramanian

Refresh ECC 6.0 do I need to refresh associated BW 7.0

Similar Messages

Maybe you are looking for