Refresh Flex View
Is there a key command or quick method of refreshing an entire tracks regions whilst it is in flex mode?
For example; Say I have an audio track with some regions in it, I open flex view and select one of the algorithms to suit. Job done and all of the regions are analysed and the transient markers are added.
Then, later on I decide to add another region to the audio track from another track but when this is inserted it isn't analysed.
Reading the manual, one way of doing this is inserting your region into the track and from the inspector's region parameter box you check the box but is there a quicker way of doing it?
one way of doing this is inserting your region into the track and from the inspector's region parameter box you check the box but is there a quicker way of doing it?
As far as I know, there is no other way (e.g., a key command). But keep in mind that you don't need to do this one region at a time, or even one track at a time. If you create a selection of many regions, you can turn Flex on for all of them by clicking once on the checkbox in the Region Inspector. And this works even if the selected regions don't all reside on the same track.
Along these lines, it's helpful to know that when you select a track, all the regions on that track are selected, by default. And then if you shift-click another track header, all the regions on that track will be added to the selection.
And if the selection includes regions that already have the Flex parameter turned on, when you click the checkbox you'll get the proper result (i.e., they will remain Flexed). This means that if your arrangement includes both Flexed regions and unFlexed regions, and you want them all to be Flexed, you can just do ⌘A (Select All) and then click the checkbox once. And it doesn't matter if the selection includes midi regions, because they will just be ignored.
Finally, here's a related tip. When selecting a Flex mode from the Flex menu, your action will be applied to all tracks (all audio tracks, that is) if you use the shift key. (You don't have to hold down that key during the whole process of pulling down the menu; it just needs to be down at the moment you release the menu.) This works in either the menu in the track header that becomes visible when you do ⌘F (Flex View), or the Flex menu that appears in the Track Inspector.
Similar Messages
-
Reg:package code to refresh materialized views
i am new to pl/sql packages and procedures.i want it to execute for running mappings in informatica which takes 0 and gives 1 when executed successfully
create or replace PACKAGE BODY pkg_refresh_mv as
procedure prc_mv (p_mv_name varchar2) is
begin
dbms_mview.refresh (p_mv_name);
end prc_mv;
procedure refresh_all_mv (proc_response IN OUT number) is
begin
dbms_mview.refresh('materialized view','C');
dbms_mview.refresh('materialized view','C');
proc_response := 1;
exception
when others then
proc_response := 0;
end refresh_all_mv ;
end pkg_refresh_mv;
when i execute this code i get the following errors
PLS-00201: identifier 'PKG_REFRESH_MV' must be declared
PLS-00304: cannot compile body of 'PKG_REFRESH_MV' without its specification
what needs to be changed
thankstry this one :
CREATE OR REPLACE PACKAGE pkg_refresh_mv
AS
PROCEDURE prc_mv (p_mv_name VARCHAR2);
PROCEDURE refresh_all_mv (proc_response IN OUT NUMBER);
END pkg_refresh_mv;
CREATE OR REPLACE PACKAGE BODY pkg_refresh_mv
AS
PROCEDURE prc_mv (p_mv_name VARCHAR2)
IS
BEGIN
dbms_mview.refresh (p_mv_name);
END prc_mv;
PROCEDURE refresh_all_mv (proc_response IN OUT NUMBER)
IS
BEGIN
dbms_mview.refresh ('materialized view', 'C');
dbms_mview.refresh ('materialized view', 'C');
proc_response := 1;
EXCEPTION
WHEN OTHERS
THEN
proc_response := 0;
END refresh_all_mv;
END pkg_refresh_mv;
/ -
How to Refresh materialized view
Hi,
I am using 11G owb. I would like to know if any one can help me know if there is any easy to Refresh materialized view . I will be using this materialized view to source data from my maps. this map will be part of a process flow. i would like to refresh the materialized view before every run of the map in process flow.
Thanks,
Ash.
Edited by: user591315 on Aug 6, 2009 1:26 PMA couple of approaches;
* refresh the MV from a procedure in a pre map process operator (its an operator in a mapping), or
* call the procedure from a process flow activity before the map
Cheers
David -
Refresh Materialized View in a package
Refresh Materialized View in a process.
I have a USER2.Materialized view and when I want to refresh it I execute:
execute dbms_mview.refresh('MV_FACT_SALES','C');
But I have the ETL process in a USER1.package
The User1 needs any Materialized View Grant or any privilegie?
How can I refresh the Materialized View in a procedure in the USER1.package?I 'm sorry, but I want to create a procedure under USER2 and when I execute the script to create it I receive the error:
ORA-06550: line 4, column 12:
PLS-00103: Encountered the symbol "DBMS_MVIEW" when expecting one of the following:
:= . ( @ % ; immediate
The symbol ":=" was substituted for "DBMS_MVIEW" to continue.
Te script procedure is:
PROCEDURE REFRESH_MV IS
BEGIN
execute dbms_mview.refresh('MV_FACT_SALES','C');
END;
How can I refresh a Materialized view in a procedure?
Thanks! -
Error While Creating Fast Refresh Materialized view.
Table Scripts:
CREATE TABLE CONTRACT_MASTER
CONTRACT_SEQ NUMBER(10) NOT NULL,
PDN CHAR(5) NOT NULL,
APPID NUMBER(10) NOT NULL,
CONTRACT_LOB_DESC VARCHAR2(20) NOT NULL,
CUSTOMER_NAME VARCHAR2(57) NOT NULL,
CONTRACT_DT DATE NOT NULL,
CONTRACT_RECD_DT DATE NOT NULL,
HELD_OFFERING_DT DATE NOT NULL,
DRAFT_AMT NUMBER(15,2) NOT NULL,
STATUS_DESC VARCHAR2(20) NOT NULL,
GIF_UPLOAD_TM TIMESTAMP NOT NULL
CREATE table CONTRACT_COMMENTS
CONTRACT_COMMENTS_SEQ NUMBER(10) NOT NULL,
APPID NUMBER(10) NOT NULL,
COMMENTS VARCHAR2(1000) NOT NULL,
GIF_UPLOAD_TM TIMESTAMP NOT NULL
Constraints on tables
ALTER TABLE CONTRACT_MASTER ADD
CONSTRAINT XPKCONTRACT_MASTER PRIMARY KEY (CONTRACT_SEQ) USING INDEX ;
ALTER TABLE CONTRACT_COMMENTS ADD
CONSTRAINT XPKCONTRACT_COMMENTS PRIMARY KEY (CONTRACT_COMMENTS_SEQ) USING INDEX ;
alter table CONTRACT_MASTER add CONSTRAINT XUIAPPCONTRACT_MASTER UNIQUE (APPID) USING INDEX;
CREATE INDEX XUIAPPCONTRACT_COMMENTS ON
CONTRACT_COMMENTS(APPID) ;
Materialized View Creation:
CREATE MATERIALIZED VIEW LOG ON CONTRACT_MASTER WITH PRIMARY KEY,ROWID;
CREATE MATERIALIZED VIEW LOG ON CONTRACT_COMMENTS WITH PRIMARY KEY, ROWID;
CREATE MATERIALIZED VIEW MV_CONTRACT_COMMENTS_HELDOFFERING
REFRESH FAST
ENABLE QUERY REWRITE AS
SELECT APPID,COMMENTS FROM CONTRACT_COMMENTS WHERE APPID IN (
SELECT APPID FROM CONTRACT_MASTER WHERE STATUS_DESC = 'Held Offering' )
Errors generated:
ERROR at line 4:
ORA-12015: cannot create a fast refresh materialized view from a complex query
_*Afer That I have changed the query but still it was not created like:*_
CREATE MATERIALIZED VIEW MV_CONT_COMMNTS_HELDOFFERNG
REFRESH FAST
ENABLE QUERY REWRITE AS
SELECT CONTRACT_COMMENTS_SEQ,c.APPID,COMMENTS
FROM CONTRACT_COMMENTS c,CONTRACT_MASTER m
WHERE m.APPID = c.APPID and m.STATUS_DESC = 'Held Offering'
*even though error displayed:
SQL> CREATE MATERIALIZED VIEW MV_CONT_COMMNTS_HELDOFFERNG*
2 REFRESH FAST
3 ENABLE QUERY REWRITE AS
4 SELECT CONTRACT_COMMENTS_SEQ,c.APPID,COMMENTS
5 FROM CONTRACT_COMMENTS c,CONTRACT_MASTER m
6 WHERE m.APPID = c.APPID and m.STATUS_DESC = 'Held Offering';
FROM CONTRACT_COMMENTS c,CONTRACT_MASTER m
ERROR at line 5:
ORA-12052: cannot fast refresh materialized view GSSIO.MV_CONT_COMMNTS_HELDOFFERNG
*Again I have done "Analyzing Materialized Views for Fast Refresh" as follows:*
1: exec dbms_mview.explain_mview('MV_CONT_COMMNTS_HELDOFFERNG');
2: SELECT capability_name, possible, SUBSTR(msgtxt,1,60) AS msgtxt
FROM mv_capabilities_table
WHERE capability_name like '%FAST%';
Output is :
CAPABILITY_NAME P MSGTXT
REFRESH_FAST N
REFRESH_FAST_AFTER_INSERT N the SELECT list does not have the rowids of all the detail t
REFRESH_FAST_AFTER_ONETAB_DML N see the reason why REFRESH_FAST_AFTER_INSERT is disabled
REFRESH_FAST_AFTER_ANY_DML N see the reason why REFRESH_FAST_AFTER_ONETAB_DML is disabled
REFRESH_FAST_PCT N PCT is not possible on any of the detail tables in the mater
Please suggest what to do to implement fast refresh materialized view for same.Edited by: dba on Sep 20, 2010 12:00 AMIf the two MVs have to be consistent with each other as of a specific time, put them into a Refresh Group and refresh them with DBMS_MVIEW.REFRESH
If an MV is dependent on another, use DBMS_MVIEW.REFRESH_DEPENDENT
See the "Oracle® Database PL/SQL Packages and Types Reference" documentation pages for DBMS_MVIEW.
Hemant K Chitale
http://hemantoracledba.blogspot.com --- this is NOT a documentation site.
Edited by: Hemant K Chitale on Sep 20, 2010 5:19 PM -
Creation of fast refresh materialized view
Hi,
I am creating fast refreshable materialized view.At that time i am getting error message
ORA-12052: cannot fast refresh materialized view OPS$QDW.EMP_DEPT_MV
I created log's also on that tables(emp,dept)
Please Help me any body.
I am using oracle 8.1.7.4.0
below the scripts i created
CREATE MATERIALIZED VIEW LOG ON emp
tablesspace vijay_test
WITH ROWID
INCLUDING NEW VALUES
CREATE MATERIALIZED VIEW LOG ON DEPT
tablesspace vijay_test
WITH ROWID
INCLUDING NEW VALUES
CREATE MATERIALIZED VIEW emp_dept_mv
TABLESPACE vijay_test
BUILD IMMEDIATE
REFRESH FAST
ENABLE QUERY REWRITE
as
select e.ename,e.empno,e.deptno,d.loc from emp e, dept d
where e.deptno=d.deptnoIt will be possible to create a Materialised view with up to 20 tables, but you have to understand the restrictions on complex Materialised views with regards to fast refresh.
To help your understanding, refer to Materialized View Concepts and Architecture
<br>
Oracle Database FAQs
</br> -
Live streaming of a non-Flex View video from PC to TV via any FiOS capabilities
Hey all -
Is it possible to, using any capability of FiOS/Flex View, stream a live video from my laptop to my TV? There is an annual competition from Europe I watch every year (only available on the web to US viewers) and it requires a special plug-in so I can only view it from my laptop, unless of course I use an adapter to plug it into my TV (which I can, but prefer not to do if FiOS/Flex View has such an option).
Going through the Manager software, I couldn't locate anything like that, but for all I know I've just overlooked it or maybe someone has figured out a way to do this successfully.
Thank you all in advance!
Cheers,
Eneg
Solved!
Go to Solution.I do apologize, but there is no way for that to happen. The Flex View or Media Manager software does not have the ability to stream live video broadcasts to your television. Looks like the adapter you were talking about is the best way to go. Enjoy your competition!
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan -
How to refresh the webdynpro view dynamically.
For eg: In some action i need to refresh the whole view and it shoud get initialised on refreshing dynamically.Hi,
onAction() invalidate the node.
Refresh View?
Re: How to refresh a View?
Regards,
ramesh
Edited by: Ramesh Babu V on Oct 22, 2008 6:40 PM
Edited by: Ramesh Babu V on Oct 22, 2008 6:42 PM -
Unable to refresh Materialized view group when an Mview is added
Hi,
I have 8 MVs present in my DB and added them to a MV refresh group. But I am getting the error below when I try to refresh the group.
SQL> exec DBMS_REFRESH.refresh('MVRFRSHGRP_EAIGHD');
begin DBMS_REFRESH.refresh('MVRFRSHGRP_EAIGHD'); end;
ORA-12048: error encountered while refreshing materialized view "MYUAT"."MV_EAI_PJRM_EMP_ALLOC_DTLS"
ORA-12018: following error encountered during code generation for "MYUAT"."MV_EAI_PJRM_EMP_ALLOC_DTLS"
ORA-00942: table or view does not exist
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2563
ORA-06512: at "SYS.DBMS_SNAPSHOT", line 2776
ORA-06512: at "SYS.DBMS_IREFRESH", line 685
ORA-06512: at "SYS.DBMS_REFRESH", line 195
ORA-06512: at line 1
SQL> Actually the view MV_EAI_PJRM_EMP_ALLOC_DTLS exists and MVlog$ are present at source site.
When I remove this view from the group, I am able to refresh it successfully.
I destroyed the group, recreated and added all the views and tried. But no luck.
Can some one suggest what could be the problem?
Regards
DeepHi,
You didn't leave a version (Again), so I can only guess.
You may be suffering from
Bug 10096159 ORA-12048 error message raised by DBMS_REFRESH.REFRESH is not corrrect
Meaning it could be a different MV that fails to refresh.
Regards
Peter
Edit:
Versions confirmed as being affected (There could be others, mind)
11.2.0.1
11.1.0.7
10.2.0.5
10.2.0.3
Edited by: Peter on Sep 4, 2012 8:45 AM -
Flex View only for movies?
Flex-View is a disappointment in that you can only pipe feature length movies to another device. Does anyone know if there are plans to allow you to simply view prerecorded TV shows on a PC? Here I am sitting in an Ethernet and wireless environment in the privacy of my home and I can't direct the TV or the DVR to my desktop system in another room on the same network. I can control the DVR from anywhere but I can't actuallt watch the recordings in the next room on my computer.
ThanksI don't know whether this will maybe give you some idea of Verizon's general direction, but take a look at this thread from yesterday's Meet the Expert session with Joe Ambeault:
http://forums.verizon.com/t5/Meet-The-Expert/1-9-Live-Streaming-and-FlexView/td-p/304003
Justin
Verizon FiOS TV, Internet, and phone
QIP7232, IMG 1.8, Build 02.54
Keller, TX 76248 -
Flex view needs an update! Flex view movies are lagging a lot sound is great and the picture doesn't get to jumpy but it still lags I checked my entire computer for a problem and found nothing and I checked my internet connection and even plugged in my Ethernet cord I called tech support and they said it was a video lagging problem they said there may be a bug or two with flex view and said Verizon might need to update it they also said a new version of silverlight would help as well thank you for taking the time to read this.
Sorry to hear about the flex view troubles. I have sent you a private message to get more information.
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan -
Flex View not streaming on wifi but works on 3G
Flex View streaming of paid and free tv shows and movies is not working on my Verizon Fios router wifi. I have tried it on my iPad 3 and my iPhone 4. But when I disable wifi on my iPhone and force it to 3G Flex View content plays fine.
When I click to "Watch" button the playback screen launches very briefly but then just crashes. Again, no problwith over 3G.
All other FIOS and other apps work fine. Any help appreciated.
Thanks!
Marcsounds like a bad wifi channel
you should log into the router.
192.168.1.1
The default user name for the Verizon MI424WR router is "admin," and the default password is "password" (do not include the quotation marks).
Note: To improve security, your router password may have been changed to the serial number of your router if you have not changed the password from the default of "password." You can find your router's password on the label affixed to the bottom or back of your router.
After you are logged in navigate to wireless settings, and basic security settings and look for channel.
Change to 1, 6 and 11. Try not to use any other channel as they are overlapping and cause trouble for you later.
Let us know which if any worked. -
Flex View purchases with bugs and no apparent support
I'm trying to get help with some of the flex view movies we've bought recently. The first issue that came up was a movie that wouldn't start where we left off, but always reset to the beginning. All of the other flex view movies we have will start where you stop it.
Then we got a movie where the audio was out of sync with the video, but only in the HD version.
Then a couple days ago, the SD version of a movie just disappeared completely, but it was there when the movie was purchased.
We tried chat help, but the person didn't have a clue beyond the scripted stuff, and tech help called when we were out, and the phone support says that Flex View support is online only. (But if you go to the page they suggest, there's just a basic FAQ page for Flex View, and no support link at all.
It seems like these are individual bugs in the underlying programming, or maybe it's a fault with the set top box. In any case, looking for solutions.Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you.Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe".
Please keep all correspondence regarding your issue in the private support portal. -
ORA-12015: cannot create a fast refresh materialized view from a complex qu
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - ProductionI'm trying to create a fast refresh materialized view that uses a column of xmltype. The problem is I cannot create an MV log that accounts for the xmltype column. I tried excluding it and got the above error. Is there another way I can incrementally update a materialized view where I don't have to do a COMPLETE refresh or use FAST refresh?
CREATE TABLE "DAS_DESC"."AUTHORITY_TEST"
"NAID" NUMBER(20,0) NOT NULL ENABLE,
"AUTH_TYPE" VARCHAR2(40 BYTE),
"XML_DATA" "SYS"."XMLTYPE" ,
"TERM_NAME" VARCHAR2(4000 BYTE)
CREATE TABLE "DAS_DESC"."AUTH_ASSC_TEST"
"NAID" NUMBER(20,0),
"P_NAID" NUMBER(20,0),
"REL_TYPE" VARCHAR2(25 BYTE),
"XML_DATA" "SYS"."XMLTYPE"
CREATE
MATERIALIZED VIEW person_mv
AS
SELECT p.naid
, p.auth_type
, INSERTCHILDXML
p.xml_data -- Parent XML Column
, '//*[contains(local-name(), ''person'')]' --XPATH to Person
, 'nonPreferredHeadingArray' -- Value for new child element
( -- Sub query for injecting new variant person array
SELECT XMLELEMENT
"nonPreferredHeadingArray"
, XMLAGG -- Aggregator for Variant Persons Array
XMLELEMENT
"variantPersonName" -- Wrapper for each entry in array
, extract(a.xml_data,'*/*')
FROM auth_assc_table -- Link table
WHERE a.p_naid = p.naid
) AS XML_DATA
FROM authority p -- Parent table
WHERE p.auth_type = 'Person';The views are created fine and they work perfectly for what we need. The problem is the refresh when we edit the base tables. Ideally, it should take a couple seconds. Right now, it takes a couple minutes. XMLTYPE is one problem and the Complex Query exception is the other. If there is a work-around for fast refresh, please let me know. Greatly appreciated.jjmdb wrote:
I'm trying to create a fast refresh materialized view that uses a column of xmltype. The problem is I cannot create an MV log that accounts for the xmltype column. I tried excluding it and got the above error. Is there another way I can incrementally update a materialized view where I don't have to do a COMPLETE refresh or use FAST refresh? Besides XMLTYPE column, your MV definition has a subquery which prevents it from being fast refreshable.
I could not find any specific reference in documentation about restriction on XMLTYPE (or CLOB) columns but it seems logical that oracle will not be able to keep track of changes to binary data. What does DBMS_MVIEW.EXPLAIN_MVIEW generate for your MV definition? That should tell you which all conditions (for FAST REFRESH) your MV violates. Since you can not create a MV LOG to include XMLTYPE column, it will not be possible to create a FAST REFRESHABLE MV that includes the XMLTYPE column.
I am afraid there is not much you can do here unless you are prepared to change the way data is stored in your base tables. If you can store data in base tables using standard data types instead of binary/XML storage, you might be able to create a FAST REFRESHABLE MV. -
ORA-12015: cannot create a fast refresh materialized view from a complex q
Hi,
I'm facing very strange problem. Please help me why this error is coming
I'm creating a simple materialized view, but it is giving below error since this is simple select * from.
CREATE MATERIALIZED VIEW EFMS.MS_TASK
BUILD IMMEDIATE
REFRESH FAST
START WITH SYSDATE
NEXT (SYSDATE + 1/24)
WITH ROWID
AS
SELECT * FROM MS_TASK@efms_link;
SELECT * FROM MS_TASK@efms_link
ERROR at line 8:
ORA-12015: cannot create a fast refresh materialized view from a complex query
CREATE MATERIALIZED VIEW LOG ON MSDBO.MS_TASK
TABLESPACE DBOR_MVLOG
PCTUSED 0
PCTFREE 60
INITRANS 20
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
PCTINCREASE 0
BUFFER_POOL DEFAULT
NOCACHE
NOLOGGING
PARALLEL ( DEGREE 2 INSTANCES 1 )
WITH ROWID, PRIMARY KEY
EXCLUDING NEW VALUES;1º
Not is a best practice to use 'select *'
2º
ORA-12015: cannot create a fast refresh materialized view from a complex query
Cause: Neither ROWIDs and nor primary key constraints are supported for complex queries.
Action: Reissue the command with the REFRESH FORCE or REFRESH COMPLETE option or create a simple materialized view.
Then you have to change REFRESH FAST or create a primary key in MS_TASK@efms_link to avility fast refresh.
. :-) any help with my english is wellcome :-) .
Maybe you are looking for
-
Cannot install HP Officejet 5610 software for windows 8
Hi there I am running Windows 8 (64-bit) I have downloaded the HP software for the Officejet 5610 All in One. When I try to run/install the software, however, it tells me that the file is corrupt. How do I get around this? Thanks,
-
Re: Fingerprint Reader Not Working On Windows 8.1 Pro Startup
Model: ThinkPad Edge E420 OS: Windows 8.1 Pro 64 bit Problem: Fingerprint reader suddenly stopped working (Image 1). One major change I think which might have lead to this - I had a recent update from Microsoft on 28/Aug/2014 (Image 2). I'm not
-
I have tried VERY unsuccessfully to install the new iphoto 9.2.3 update. I have installed it several times both from the appstore and from Apple Support downloads...it says it has 'successfully updated' - then on opening iphoto, a dialogue box pops u
-
Hi, I use Firefox 6.0.1 on Windows 7. I installed '''Free Desktop Clock 2.37''' from Drive Software, and then Firefox was hi-jacked, though I carefully chose the custom installaion. Edit: Free Desktop Clock itself does not hi-jack Firefox. It's anoth
-
Spam mails are not deleted from the spam folder
In the account settings, I have set the spam mail to be automatically deleted after one day. In spite of that, spam mail in the spam folder is not automatically deleted at any time, even if I restart Thunderbird. In the end, I always have to clean th