Refresh itab is not getting triggered

hi,
SELECT ebeln
bukrs
ernam
lifnr
spras
FROM ekko INTO CORRESPONDING FIELDS OF
TABLE g_it_ekko WHERE lifnr IN r_lifnr.
DESCRIBE TABLE g_it_ekko LINES n.
grid-lines = n.
IF sy-subrc = 0.
MESSAGE s002(zsan) WITH n.
ELSE.
REFRESH g_it_ekko.
MESSAGE e000(zsan) WITH n.
ENDIF.
the message is gettig triggered first but the refresh statement is not getting triggered. i want the refresh statement should be triggered first and then the message.plz help.
thanks & regards,
santosh.

Try changing ur code like below
SELECT ebeln
bukrs
ernam
lifnr
spras
FROM ekko INTO CORRESPONDING FIELDS OF
TABLE g_it_ekko WHERE lifnr IN r_lifnr.
IF sy-subrc = 0.
DESCRIBE TABLE g_it_ekko LINES n.
grid-lines = n.
MESSAGE s002(zsan) WITH n.
ELSE.
REFRESH g_it_ekko.
DESCRIBE TABLE g_it_ekko LINES n.
grid-lines = n.
MESSAGE w000(zsan) WITH n. "warning msg
ENDIF.

Similar Messages

Events not getting triggered

in the code my event subtot_text is not getting triggered .... any solution plz
REPORT zver_alv_basic.
TYPE-POOLS slis.
DATA: BEGIN OF itab OCCURS 0,
          vbeln LIKE vbap-vbeln,
          posnr LIKE vbap-posnr,
          matnr LIKE vbap-matnr,
          netwr LIKE vbap-netwr,
       END OF itab.
DATA: fcat TYPE slis_t_fieldcat_alv,
      wa_fcat TYPE slis_fieldcat_alv,
      i_sort TYPE slis_t_sortinfo_alv WITH HEADER LINE,
      i_event TYPE slis_t_event.
SELECT vbeln
       posnr
       matnr
       netwr
FROM vbap
INTO TABLE itab
UP TO 30 ROWS.
I_SORT-FIELDNAME = 'POSNR'.
I_SORT-TABNAME = 'ITAB'.
I_SORT-UP = 'X'.
I_SORT-SUBTOT = 'X'.
APPEND I_SORT.
Perform to populate ALV event
PERFORM sub_get_event.
To prepare field catalog
PERFORM sub_field_catalog.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program = sy-cprog
    it_fieldcat        = fcat
    it_events         = i_event
    it_sort = i_sort[]
TABLES
    t_outtab           = itab.
*&      Form SUB_FIELD_CATALOG
FORM sub_field_catalog .
PERFORM sub_fill_alv_field_catalog USING:
     '01' 'VBELN' 'ITAB' 'VBELN' 'VBAP' ,
     '02' 'POSNR' 'ITAB' 'POSNR' 'VBAP' ,
     '03' 'MATNR' 'ITAB' 'MATNR' 'VBAP' ,
     '04' 'NETWR' 'ITAB' 'NETWR' 'VBAP' .
ENDFORM.                    " SUB_FIELD_CATALOG
*&      Form SUB_FILL_ALV_FIELD_CATALOG
FORM sub_fill_alv_field_catalog USING    p_rowpos
                                          p_fldnam p_tabnam   p_ref_fieldname p_ref_tabname .
wa_fcat-col_pos = p_rowpos.
wa_fcat-fieldname = p_fldnam .
wa_fcat-tabname = p_tabnam .
wa_fcat-ref_fieldname = p_ref_fieldname .
wa_fcat-ref_tabname = p_ref_tabname.
IF P_FLDNAM = 'NETWR'.
    wa_fcat-do_sum = 'X'.
ENDIF.
APPEND wa_fcat TO fcat.
CLEAR wa_fcat.
ENDFORM.                    " SUB_FILL_ALV_FIELD_CATALOG
*&      Form SUB_GET_EVENT
FORM sub_get_event .
DATA: wa_event TYPE slis_alv_event.
    CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 4
    IMPORTING
      et_events       = i_event.
READ TABLE i_event INTO wa_event
                    WITH KEY name = 'SUBTOTAL_TEXT'.
IF sy-subrc = 0.
    MOVE 'SUBTOT_TEXT ' TO wa_event-form.
    MODIFY i_event FROM wa_event INDEX sy-tabix.
ENDIF.
ENDFORM.                    " SUB_GET_EVENT
*&      Form subtotal_text
      Build subtotal text
      P_total Total
      p_subtot_text Subtotal text info
FORM subtot_text CHANGING
               p_total TYPE any
               p_subtot_text TYPE slis_subtot_text.
Material level sub total
IF p_subtot_text-criteria = 'VBELN'.
    p_subtot_text-display_text_for_subtotal
    = 'VENDOR level total'(009).
ENDIF.
Plant level sub total
IF p_subtot_text-criteria = 'POSNR'.
    p_subtot_text-display_text_for_subtotal = 'POSNR level total'(010).
ENDIF.
ENDFORM.                    "subtotal_text

*& Report ZVER_ALV_BASIC
REPORT zver_alv_basic.
TYPE-POOLS slis.
DATA: BEGIN OF itab OCCURS 0,
          vbeln LIKE vbap-vbeln,
          posnr LIKE vbap-posnr,
          matnr LIKE vbap-matnr,
          netwr LIKE vbap-netwr,
       END OF itab.
DATA: fcat TYPE slis_t_fieldcat_alv,
      wa_fcat TYPE slis_fieldcat_alv,
      i_sort TYPE slis_t_sortinfo_alv ,
      wa_sort TYPE slis_sortinfo_alv,
      i_event TYPE slis_t_event.
START-OF-SELECTION.
SELECT vbeln
       posnr
       matnr
       netwr
FROM vbap
INTO TABLE itab
UP TO 30 ROWS.
wa_sort-spos = '01' .
wa_sort-fieldname = 'VBELN'.
wa_sort-tabname = 'ITAB'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
Wa_sort-spos = '02' .
wa_sort-fieldname = 'POSNR'.
wa_sort-tabname = 'ITAB'.
wa_sort-up = 'X'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO i_sort .
CLEAR wa_sort.
Perform to populate ALV event
PERFORM sub_get_event.
To prepare field catalog
PERFORM sub_field_catalog.
END-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    i_callback_program = sy-cprog
    it_fieldcat        = fcat
    it_events         = i_event
    it_sort = i_sort[]
TABLES
    t_outtab           = itab.
*&      Form SUB_FIELD_CATALOG
FORM sub_field_catalog .
PERFORM sub_fill_alv_field_catalog USING:
     '01' 'VBELN' 'ITAB' 'VBELN' 'VBAP' ,
     '02' 'POSNR' 'ITAB' 'POSNR' 'VBAP' ,
     '03' 'MATNR' 'ITAB' 'MATNR' 'VBAP' ,
     '04' 'NETWR' 'ITAB' 'NETWR' 'VBAP' .
ENDFORM.                    " SUB_FIELD_CATALOG
*&      Form SUB_FILL_ALV_FIELD_CATALOG
FORM sub_fill_alv_field_catalog USING    p_rowpos
                                          p_fldnam p_tabnam   p_ref_fieldname p_ref_tabname .
wa_fcat-col_pos = p_rowpos.
wa_fcat-fieldname = p_fldnam .
wa_fcat-tabname = p_tabnam .
wa_fcat-ref_fieldname = p_ref_fieldname .
wa_fcat-ref_tabname = p_ref_tabname.
IF p_fldnam = 'NETWR'.
    wa_fcat-do_sum = 'X'.
ENDIF.
APPEND wa_fcat TO fcat.
CLEAR wa_fcat.
ENDFORM.                    " SUB_FILL_ALV_FIELD_CATALOG
*&      Form SUB_GET_EVENT
FORM sub_get_event .
DATA: wa_event TYPE slis_alv_event.
    CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      i_list_type     = 4
    IMPORTING
      et_events       = i_event.
READ TABLE i_event INTO wa_event
                    WITH KEY name = 'SUBTOTAL_TEXT'.
IF sy-subrc = 0.
    MOVE 'SUBTOT_TEXT ' TO wa_event-form.
    MODIFY i_event FROM wa_event INDEX sy-tabix.
ENDIF.
ENDFORM.                    " SUB_GET_EVENT
*&      Form subtotal_text
      Build subtotal text
      P_total Total
      p_subtot_text Subtotal text info
FORM subtot_text CHANGING
               p_total TYPE any
               p_subtot_text TYPE slis_subtot_text.
Material level sub total
IF p_subtot_text-criteria = 'VBELN'.
    p_subtot_text-display_text_for_subtotal
    = 'VENDOR level total'(009).
ENDIF.
Plant level sub total
IF p_subtot_text-criteria = 'POSNR'.
    p_subtot_text-display_text_for_subtotal = 'POSNR level total'(010).
ENDIF.
WRITE :/ 'cow'.
ENDFORM.                    "subtotal_text }

PAI not getting triggered.

HI, I have a code as below.
The PAI module is not getting triggered.
I guess something small is missing but I am not getting it.
YOur help wud be appretiated and rewarded.
Thanks
=================
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
LOOP WITH CONTROL TC.
MODULE FILL_TABLE_CONTROL.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
MODULE CANCEL AT EXIT-COMMAND.
LOOP WITH CONTROL TC.
module read_table_control.
ENDLOOP.
module user_command_0100.
======================
Program Code :
*& Report ZSCD_TEST5
REPORT ZSCD_TEST5.
DATA: BEGIN OF ITAB OCCURS 0,
PERNR TYPE PA0002-PERNR,
NACHN TYPE PA0002-NACHN,
VORNA TYPE PA0002-VORNA,
END OF ITAB.
CONTROLS TC TYPE TABLEVIEW USING SCREEN 100.
DATA: BEGIN OF WA_ITAB ,
PERNR TYPE PA0002-PERNR,
NACHN TYPE PA0002-NACHN,
VORNA TYPE PA0002-VORNA,
END OF wa_ITAB.
data : fill TYPE i.
DATA: ok_code TYPE sy-ucomm,
save_ok TYPE sy-ucomm.
DATA: lines TYPE i,
limit TYPE i.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_LNAME LIKE PA0002-NACHN.
SELECTION-SCREEN END OF BLOCK B1.
start-of-selection.
select pernr nachn vorna from pa0002 into table itab where nachn = p_lname.
CALL SCREEN 100.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'PF1'.
DESCRIBE TABLE itab LINES fill.
TC-lines = fill.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module CANCEL INPUT
text
MODULE CANCEL INPUT.
LEAVE PROGRAM.
ENDMODULE. " CANCEL INPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
save_ok = ok_code.
CLEAR ok_code.
CASE save_ok.
WHEN 'NEXT_LINE'.
TC-top_line = TC-top_line + 1.
limit = fill - lines + 1.
IF TC-top_line > limit.
TC-top_line = limit.
ENDIF.
WHEN 'PREV_LINE'.
TC-top_line = TC-top_line - 1.
IF TC-top_line < 0.
TC-top_line = 0.
ENDIF.
WHEN 'NEXT_PAGE'.
TC-top_line = TC-top_line + lines.
limit = fill - lines + 1.
IF TC-top_line > limit.
TC-top_line = limit.
ENDIF.
WHEN 'PREV_PAGE'.
TC-top_line = TC-top_line - lines.
IF TC-top_line < 0.
TC-top_line = 0.
ENDIF.
WHEN 'LAST_PAGE'.
TC-top_line = fill - lines + 1.
WHEN 'FIRST_PAGE'.
TC-top_line = 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module READ_TABLE_CONTROL INPUT
text
MODULE READ_TABLE_CONTROL INPUT.
lines = sy-loopc.
MODIFY itab from wa_itab INDEX TC-current_line.
ENDMODULE. " READ_TABLE_CONTROL INPUT
*& Module FILL_TABLE_CONTROL OUTPUT
text
MODULE FILL_TABLE_CONTROL OUTPUT.
READ TABLE itab into wa_itab INDEX TC-current_line.
ENDMODULE. " FILL_TABLE_CONTROL OUTPUT

Give MODULE USER_COMMAND_0100 lik this
PROCESS AFTER INPUT.
MODULE CANCEL AT EXIT-COMMAND.
LOOP at itab WITH CONTROL TC.
module read_table_control.
ENDLOOP.
MODULE USER_COMMAND_0100.
siva

/BDL/TASK_PROCESSOR not getting triggered in satellite system from Solman

Hi,
We have scheduled EWA report in Solution Manager for one of the satellite system.
Solution Manager has sudddenly stopped creating of job /BDL/TASK_PROCESSOR0000002218 (ie job which is created immediately as EWA is scheduled in Solution Manager)
/BDL/TASK_PROCESSOR is running correctly and on hourly basis in satellite.
The EWA report is getting generated in Solution Manager after long time and without job /BDL/TASK_PROCESSOR0000002218 (is sessin specific job) being triggered.
Kindly help.
Regards,
Trupti M

Hi Paul,
My problem is solved.
Actually the Task: EarlyWatch Alert for Solution Manager under 'To Do' view of sdccn of satellite system was somehow getting scheduled as Back dated(ie instead of 30.04.2020 it was getting scheduled at 28.04.2010)
Due to this when we would do 'Start now' for the Task 'EarlyWatch Alert for Solution Manage' it was not getting triggered.
So I manually did refresh session which was mentioned under steps for manully sending data to SolMan under solution_mamanger tcode.
Due to this job BDL/TASK_PROCESSOR0000002237 got created.After this job got completed Task ''EarlyWatch Alert for Solution Manager ' got automatically generated.
I back dated the date for Task ''EarlyWatch Alert for Solution Manager" and started it.
Due to this the job /BDL/TASK_PROCESSOR0000002238 got created in satellite system for sending data to SolMan (This was not happening earlier.)
Extract from Solution_Manager tcode when scheduling:
When the Session Refresh task has been processed, a new task with the appropriate session type and session number appears in the To do view. This task collects and sends the data for your session. If a new task does not appear, search in the task-specific log for errors that ocurred during the Session Refresh task and make any necessary corrections.
To start the task immediately, select it and right-click to call up the context menu.
Choose Start Now. When the task has been processed successfully, it appears in the Done view. The data has been sent to your SAP Solution Manager system. You can check this in the task-specific log.
Thanks for all your help. Hoping my post will also be helpful for others.
Regards,
Trupti M

Event not getting triggered for a few users in production

Hi Experts!!
We have a workflow that gets triggered on the event REQUESTCREATED of BUS2089. In production, we see that for a few users the event is getting triggered and even the workflow is. But for a few users, the workflow is not getting triggered. However, we didn't check SWEQADM yet and are waiting to get auth to check the same. But before that, I need your valuable suggestions on this.
When I check SWEL, I cannot see any entries at all. Not even for the successfully processed ones.
Auth objects cannot be a reason, as all the users have same auth. Please suggest me on what else can be the reasons.
Your help is highly appreciable.

Hello Srinivas !
              Check in SWEQADM to know whether the event is on queue.If so, redeliver it.
              If there is no event on queue, check the RFC queue( transaction SWU2 ) and ST22 for possible ABAP dumps.
              Call work item list report (transaction SWI1) and check event linkages (transaction SWETYPV )of the users for whom the event is not triggered.Are you using BAdI or user- exit to trigger the workflow ? If so, check whether those are in active state.
             Refresh the workflow buffers(transaction SWU_OBUF).Check either of the workflow versions are in active state.
Regards,
S.Suresh

Issue in Production for Workflow not getting Triggered .

Hi Guys,
I have a workflow, which is properly triggering in the development and Quality but not getting triggered in the Production. Can't get the Exaact reason because by using T-code PFTC when i test the workflow independantly its working properly and even BOR does not have any problem. Please Help me guys as this is a issue in Production.
The workflow is a customized one, It getting triggered throught the funtion call in User Exit of MM01.
Thanks

It getting triggered throught the funtion call in User Exit of MM01.
1. I hope the workflow customization is done properly in production system, as you stated that if you are trying to trigger from PFTC then it is working fine, can you please try to Refresh Organizational Environment from SBWP ---> On MEnu ---> Settings --> Workflow Settings ---> Refresh Organizational Environment and secondly try to refresh the buffer from txn SWU_OBUF
2. Make sure the user exit is transported to Production.
3. Check the workflow log from the txn SWIA if you have proper authorizations for the userid.

Alert is not getting triggered in QA

Hai Experts!
i have transported the Alert Classification and Alert Category from development system to Quality system and i created the alert rule in QA. Now alerts mails are not tiggering. In se30 i have excecuted the RSALERTTEST that time i am getting a mail in the alert inbox and also to my mail box but for a real time data alert is not getting triggered.
Pls help me to solve this issue.
Regard's
Preethi

Hi
Schedule send job
please see as
help.sap says
Send Job
E-mails sent from an SAP application are first stored in a queue. A periodical background process, the SAPconnect send job, gets the e-mails from this queue and sends them over the Internet. To schedule this job in SAPconnect: Administration, proceed as follows:
i.         Choose View ® Jobs.
ii.       If no other job has been scheduled, choose Job ® Create.
iii.      Enter a job name and confirm it.
iv.      Select the variant SAP&CONNECTALL by positioning the cursor on it.
v.        Choose Schedule Job.
vi.      Choose Schedule periodically.
vii.     Select the interval you require, such as 10 minutes.
viii.   Choose Create.
Refer this.
http://help.sap.com/saphelp_nw04/helpdata/en/af/73563c1e734f0fe10000000a114084/content.htm

Print program is not getting triggered when saving the application

Hi all,
My requirement is when i save the invoice using VF01 the print program should get triggered.
The print program is not getting triggered when saving the application even when i have configured the outtype and have attached the print program.
The setting "send immediately (when saving application)" is also checked.
I need to configure it for VF01 transaction.
The error message displayed was " please maintain output device in master data".
Regards,
Umesh

Hi Umesh
Please check if you have missed any of the following:
1. Defining Access Sequence(can use existing).
2. Defining Output Condition Type(can use existing). - Assigning the Driver Program and Form in processing routine.
3. Output Determination Procedure
4. Assign Output Procedure to Billing Types
Kind Regards
Eswar

User command is not getting triggered in interactive ALV with LIST display

Hi experts,
I have developed an interactive ALV report with LIST display. Here, the issue is, when i double click a record in the primary ALV list, the control must go to the USER COMMAND event which i have written in my report. But the user command event is not getting triggered at all when i double click any record.
It gives the following information instead.
"Choose a valid function".
(My user command name and its respective form name are same.)
Here is my code..
START-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program       = sy-repid
      i_structure_name         = p_table
      i_callback_user_command = 'TST1'
      i_callback_pf_status_set = 'SET_PF_STATUS'
    TABLES
      t_outtab                 = <dyn_table>
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
ENDIF.
FORM tst1 USING r_ucomm LIKE sy-ucomm
                rs_selfield TYPE slis_selfield.
* Local data declaration
DATA: li_tab TYPE REF TO data,
        l_line TYPE REF TO data.
* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
                <l_wa> TYPE ANY.
* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>. CASE r_ucomm.
*   When a record is selected
    WHEN '&IC1'.
*     Read the selected record
      READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
      rs_selfield-tabindex.      IF sy-subrc = 0.
*       Store the record in an internal table
        APPEND <dyn_wa> TO <l_tab>.
*       Fetch the field catalog info
        CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
          EXPORTING
            i_program_name         = 'Z_DEMO_PDF_JG'
            i_structure_name       = p_table
          CHANGING
            ct_fieldcat            = i_fieldcat
          EXCEPTIONS
            inconsistent_interface = 1
            program_error          = 2
            OTHERS                 = 3.
Please advice what is the msitake i have done here..

Read the following code:
pass the i_callback_user_command = g_user_command to the ALV function module and write the FORM user_command USING ucomm    LIKE sy-ucomm
                        selfield TYPE slis_selfield.
as shown below.
thanx
Data for ALV display
DATA : gt_fieldcat TYPE slis_t_fieldcat_alv,
        gt_events           TYPE slis_t_event,
        g_variant LIKE disvariant,
        g_user_command      TYPE slis_formname VALUE 'USER_COMMAND',
        g_status            TYPE slis_formname VALUE 'SET_PF_STATUS',
        gt_list_top_of_page TYPE slis_t_listheader,
        g_repid LIKE sy-repid,
        gf_pos TYPE i
Data for ALV display
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
          i_callback_program      = g_repid
             i_callback_program      = sy-repid
             it_fieldcat             = gt_fieldcat[]
       it_events               = gt_events[]
          i_callback_user_command = g_user_command
             i_save                  = 'A'
             is_variant              = g_variant
           TABLES
             t_outtab                = it_print.
FORM user_command USING ucomm    LIKE sy-ucomm
                        selfield TYPE slis_selfield.
CASE ucomm.
    WHEN '&IC1'.
      CASE selfield-sel_tab_field.
        WHEN '1-KUNNR'.
          READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
          IF sy-subrc = 0.
            SET PARAMETER ID 'BPA' FIELD wa_print-kunnr.
            CALL TRANSACTION 'BP'.
          ENDIF.
        WHEN '1-MATNR'.
          READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
          IF sy-subrc = 0.
            SET PARAMETER ID 'JP_ISS' FIELD wa_print-matnr.
            CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN..
           GET PARAMETER ID 'WRK' FIELD wa_zprint-werks.
           SET PARAMETER ID 'VKO' FIELD wa_zprint-vkorg.
           SET PARAMETER ID 'VTW' FIELD wa_zprint-vtweg.
           CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN.
          ENDIF.
Endcase.
Endform.

Output fax not getting triggered when sales order credit block is released

Hi Experts,
I am working on an issue.
I have one sales Order which has credit block.
when we release the credit block via vkm3, then the output fax gets triggered.
I have another sales order which has credit block,
when we release the credit blcok via vkm3 , the output fax is NOT getting triggered.
If any of you has worked on this setting, request your input on where to find the settings/coding for the same.
Any advice on this please.
Regs,
SuryaD.
Edited by: SuryaD on Oct 21, 2010 9:34 PM

Hi Brad,
Thanks for your response.
Order 1: Issues output fax(ZFAX) correctly when block is released.(i see output zfax in te output screen)
Order 2: Fails to issue output fax(ZFAX) even when the block is released.( i dont see any output in the output screen)
I went to Go to -Determine analysis for both orders 1 and order 2.
in both the analysis i am able to see the output ZFAX.
*Analysis Output*
*Order 1                                                                    Order 2*
1. ZFAX                                                                   1.   ZFAX
    10(Z010)                                                                 10(Z010)
       0000122426                                                              0000122427
2. ZFAX                                                                   2.   ZFAX
When i click, D.Click on the output type ZFAX on both the order Analysis output screen, i see similarities.
There in just 2 differences as below.
In the above screen,
1.Order 1 ==> has some value 0000122426
2.For Order 1==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
Diagnosis
Output ZFAX has already been issued. Multiple issue for this output type is forbidden in Customizing.
In the above screen
1.Order 2 ==> has some value 0000122427
2.For Order 2==> row marked 2.(in the above screen) if i D.Click on ZFAX it says
No more information is available.
Please guide as to how to initiate the debug for output processing ?
Which screen where to switch on debugger.
where to look further?
Regards,
SuryaD.
Edited by: SuryaD on Oct 22, 2010 11:41 AM

Driver program is not getting triggered

Hi Experts ,
I have assigned driver program and form under the application ME to the output type WE01 and WE02 and WE03 .But my program is not getting triggered.
How to check whether the Form entry is getting or not ?
i have also tried putting the break point in the program.
Please suggest .
Thanks

Hi Kartik,
Thanks a lot !
Update for you ......
By refereing std prog i have written the form routine like below.
FORM entry USING ent_retco ent_screen.
xscreen = ent_screen.
CLEAR ent_retco.
PERFORM check_input USING nast-objky.
ent_retco = retco.
    perform fetch_data.
    perform print_control.
ENDFORM.
form check_input using objky.
nast_key = objky.
select single werks from t001w into t001w-werks where werks = NAST_KEY-p_werks.
if sy-subrc ne 0.
   message 'ENTER VALID PLANT' type 'E'.
endif.
endform.                    "check_input
But i am not able to debug the code...
Break point is not triggering the code.

Due to MODIF ID, SELECT query in START-OF-SELECTION not getting triggered

Dear SAP Gurus,
I'm stuck with this program, where, my program is not being executed, as in, my SELECT query in my event START-OF-SELECTION is not getting triggered. Since i hav used MODIF ID, for SELECT-OPTIONS, even after putting the entries in select-options...................when i click on the execute button, or press F8, the program still goes into the AT SELECTION-SCREEN OUTPUT event..........but i want it to goto START-OF-SELECTION event where my SELECT query is........what should i do??????????????
Please find the notepad file having the code, n exucse me for any selection-texts absence.
Need help from u in this issue.
Thanks in advance.
REPORT ZPPR_CONVSTAT NO STANDARD PAGE HEADING.
INCLUDE ZPPR_CONVSTAT_TOP.               " data declaration
INCLUDE ZPPR_CONVSTAT_SEL_CRITERIA.      " selection criteria
INCLUDE ZPPR_CONVSTAT_PBO.               " event at selection-screen output
INCLUDE ZPPR_CONVSTAT_START_SELECTION.   " event start-of-selection
INCLUDE ZPPR_CONVSTAT_F_START_OF_SEL.
*& Include           ZPPR_CONVSTAT_TOP
TABLES : VBUK,
          VBUP,
          VBAK,
          VBAP,
          VBEP,
          VBPA,
          TVAK,
          EKUB,
          LIKP,
          LIPS,
          MARA,
          MAKT,
          MARC,
          PLAF,
          AUFK,
          AFKO,
          AFPO,
          AFVC,
          AFVV,
          CRHD,
          PBIM,
          KNA1,
          T134,
          IOHEADER,
          IOITEM.
TYPE-POOLS : slis.
TYPES : BEGIN OF ty_final,
        werks   TYPE vbap-werks, "Plant
        auart   TYPE vbak-auart, "Sales Order Doc. type
        erdat   TYPE vbak-erdat, "Sales Order Creation date
        vbeln   TYPE vbak-vbeln, "Sales Order No.
        posnr   TYPE vbap-posnr, "Sales Order Item No.
        aedat   TYPE vbak-aedat, "Sales Order Change Date
        kwmeng TYPE vbap-kwmeng, "Sales Order qty.
        vdatu   TYPE vbak-vdatu, "Requested Delivery Date
        lfimg   TYPE lips-lfimg, "Sales Order Delivered Qty.
        matnr   TYPE vbap-matnr, "Material ID
        arktx   TYPE vbap-arktx, "Material Description
        strgr   TYPE marc-strgr, "Planning Strategy
        vrkme   TYPE vbap-vrkme, "UOM
        plnum   TYPE plaf-plnum, "Plan Order No.
        gsmng   TYPE plaf-gsmng, "Plan Order Qty.
        auffx   TYPE plaf-auffx, "Plan Order Firming Indicator u2013 Qty.
        stlfx   TYPE plaf-stlfx, "Plan Order Firming Indicator - Component
        erdat2 TYPE aufk-erdat, "Production Order Creation Date
        aufnr   TYPE aufk-aufnr, "Production Order No.
        prdqty TYPE afko-gamng, "Production Order qty.
        pckqty TYPE lips-lfimg, "Packed Delivered Qty.
        psamg   TYPE afpo-psamg, "Allotted scrap
        igmng   TYPE afko-igmng, "Confirmed Yield Qty.
        iasmg   TYPE afko-iasmg, "Confirmed Scrap Qty
        iamng   TYPE afpo-iamng, "Expected Yield
        wemng   TYPE afpo-wemng, "Delivered Qty.
        altscrp TYPE c LENGTH 6, "Allotted Scrap %
        actscrp TYPE c LENGTH 6, "Actual Scrap %
        umrez   TYPE afvv-umrez, "Ups (from Prd. ORD)
        ups     TYPE clobjdat-ausp1, "Ups (from Material Master)
        crtnstl TYPE clobjdat-ausp1, "Carton Style
        ppopr   TYPE clobjdat-ausp1, "Pre-Printing Operation
        brdtyp TYPE clobjdat-ausp1, "Board Type
        lsdim1 TYPE clobjdat-ausp1, "Layout Size u2013 Dim 1
        lsdim2 TYPE clobjdat-ausp1, "Layout Size u2013 Dim 2
        lsgsm   TYPE clobjdat-ausp1, "GSM
        inktyp TYPE clobjdat-ausp1, "Ink Type
        foiltyp TYPE clobjdat-ausp1, "Foiling
        wintyp TYPE clobjdat-ausp1, "Window Type
        lamin   TYPE clobjdat-ausp1, "Lamination
        fsvrnsh TYPE clobjdat-ausp1, "Front Side Varnish
        bsvrnsh TYPE clobjdat-ausp1, "Back Side Varnish
        emboss TYPE clobjdat-ausp1, "Embossing
        punch   TYPE clobjdat-ausp1, "Punching
        paste   TYPE clobjdat-ausp1, "Pasting
        oprno   TYPE afvc-vornr,      "Operation No.
        wrkcntr TYPE crhd-arbpl,      "Work Centre
        oprtxt TYPE afvc-ltxa1,      "Operation Text
        oprqty TYPE afvv-mgvrg,      "Operation qty.
        yield   TYPE afvv-lmnga,      "Yield
        scrap   TYPE afvv-xmnga,      "Scrap
        jobtyp TYPE vbak-augru,      "Job Type
        prordst TYPE bsvx-sttxt,      "Production Order Status
        solinst TYPE vbup-lfsta,      "Sales Order Line Item Status
        sldprty TYPE kna1-name1,      "Sold to Party Name
        shpprty TYPE kna1-name1,      "Ship to Party Name
        shpcity TYPE kna1-ort01,      "Ship to party - City
        END OF ty_final.
TYPES : BEGIN OF ty_vbak,
        auart   TYPE vbak-auart,
        erdat   TYPE vbak-erdat, "Doc creation date
        vbeln   TYPE vbak-vbeln,
        aedat   TYPE vbak-aedat, "Doc change date
        vdatu   TYPE vbak-vdatu, "Requested delivery date
        kunnr   TYPE vbak-kunnr,
        augru   TYPE vbak-augru, "Job Type
        END OF ty_vbak.
TYPES : BEGIN OF ty_vbap,
        vbeln   TYPE vbap-vbeln,
        posnr   TYPE vbap-posnr,
        werks   TYPE vbap-werks,
        matnr   TYPE vbap-matnr,
        arktx   TYPE vbap-arktx,
        kwmeng TYPE vbap-kwmeng,
        vrkme   TYPE vbap-vrkme,
        END OF ty_vbap.
TYPES : BEGIN OF ty_pbim,
        pbdnr TYPE pbim-pbdnr, "Requirements Plan Number
        bdzei TYPE pbim-bdzei, "Independent requirements pointer
        matnr TYPE pbim-matnr,
        werks TYPE pbim-werks,
        END OF ty_pbim.
TYPES : BEGIN OF ty_pbhi,
        bdzei TYPE pbhi-bdzei, "Independent requirements pointer
        pdatu TYPE pbhi-pdatu, "Requirement date
        laeda TYPE pbhi-laeda, "Date of Last Change
        END OF ty_pbhi.
TYPES : BEGIN OF ty_ekko,
        ebeln TYPE ekko-ebeln, "STO doc no
        bsart TYPE ekko-bsart,
        reswk TYPE ekko-reswk, "Supplying plant
        aedat TYPE ekko-aedat, "Doc creation date
        END OF ty_ekko.
TYPES : BEGIN OF ty_ekpo,
        ebeln TYPE ekpo-ebeln,
        ebelp TYPE ekpo-ebelp,
        aedat TYPE ekpo-aedat, "Doc change date
        menge TYPE ekpo-menge,
        meins TYPE ekpo-meins,
        matnr TYPE ekpo-matnr,
        txz01 TYPE ekpo-txz01,
        END OF ty_ekpo.
TYPES : BEGIN OF ty_eket,
        ebeln TYPE eket-ebeln,
        ebelp TYPE eket-ebelp,
        eindt TYPE eket-eindt, "Requested delivery date
        END OF ty_eket.
TYPES : BEGIN OF ty_lips,
        vbeln TYPE lips-vbeln,
        posnr TYPE lips-posnr,
        vgbel TYPE lips-vgbel,
        vgpos TYPE lips-vgpos,
        lfimg TYPE lips-lfimg,
        END OF ty_lips.
TYPES : BEGIN OF ty_plaf,
        plnum TYPE plaf-plnum,
        matnr TYPE plaf-matnr,
        gsmng TYPE plaf-gsmng,
        auffx TYPE plaf-auffx,
        stlfx TYPE plaf-stlfx,
        kdauf TYPE plaf-kdauf,
        kdpos TYPE plaf-kdpos,
        pbdnr TYPE plaf-pbdnr,
        END OF ty_plaf.
TYPES : BEGIN OF ty_aufk,
        aufnr TYPE aufk-aufnr,
        erdat TYPE aufk-erdat,
        objnr TYPE aufk-objnr,
        END OF ty_aufk.
TYPES : BEGIN OF ty_afko,
        aufnr TYPE afko-aufnr,
        gamng TYPE afko-gamng, "Total order quantity
        gasmg TYPE afko-gasmg, "Total scrap quantity in the order
        igmng TYPE afko-igmng, "Confirmed Yield Qty
        iasmg TYPE afko-iasmg, "Confirmed Scrap Qty
        aufpl TYPE afko-aufpl, "Routing number of operations in the order
        END OF ty_afko.
TYPES : BEGIN OF ty_afpo,
        aufnr TYPE afpo-aufnr,
        plnum TYPE afpo-plnum,
        matnr TYPE afpo-matnr,
        pgmng TYPE afpo-pgmng, "Plan Order Qty
        kdauf TYPE afpo-kdauf,
        kdpos TYPE afpo-kdpos,
        psamg TYPE afpo-psamg, "Allotted scrap
        iamng TYPE afpo-iamng, "Expected Yield Variance
        wemng TYPE afpo-wemng, "Delivered Qty
        END OF ty_afpo.
TYPES : BEGIN OF ty_afvc,
        vornr TYPE afvc-vornr,
        aufpl TYPE afvc-aufpl, "Routing number of operations in the order
        aplzl TYPE afvc-aplzl, "General counter for order
        arbid TYPE afvc-arbid, "Object ID of the resource
        ltxa1 TYPE afvc-ltxa1,
        END OF ty_afvc.
TYPES : BEGIN OF ty_afvv,
        aufpl TYPE afvv-aufpl, "Routing number of operations in the order
        aplzl TYPE afvv-aplzl, "General counter for order
        umrez TYPE afvv-umrez,
        mgvrg TYPE afvv-mgvrg,
        lmnga TYPE afvv-lmnga,
        xmnga TYPE afvv-xmnga,
        END OF ty_afvv.
TYPES : BEGIN OF ty_mdvm,
        mdkey TYPE mdvm-mdkey,
        disst TYPE mdkp-disst,
        matnr TYPE mdkp-matnr,
        plwrk TYPE mdkp-plwrk,
        END OF ty_mdvm.
DATA : it_final TYPE STANDARD TABLE OF ty_final,
        it_vbak   TYPE STANDARD TABLE OF ty_vbak,
        it_vbap   TYPE STANDARD TABLE OF ty_vbap,
        it_lips   TYPE STANDARD TABLE OF ty_lips,
        it_pbim   TYPE STANDARD TABLE OF ty_pbim,
        it_pbhi   TYPE STANDARD TABLE OF ty_pbhi,
        it_ekko   TYPE STANDARD TABLE OF ty_ekko,
        it_ekpo   TYPE STANDARD TABLE OF ty_ekpo,
        it_eket   TYPE STANDARD TABLE OF ty_eket,
        it_plaf   TYPE STANDARD TABLE OF ty_plaf,
        it_aufk   TYPE STANDARD TABLE OF ty_aufk,
        it_afko   TYPE STANDARD TABLE OF ty_afko,
        it_afpo   TYPE STANDARD TABLE OF ty_afpo,
        it_afvc   TYPE STANDARD TABLE OF ty_afvc,
        it_afvv   TYPE STANDARD TABLE OF ty_afvv,
        it_mdvm   TYPE STANDARD TABLE OF ty_mdvm.
DATA : wa_final TYPE ty_final,
        wa_vbak   TYPE ty_vbak,
        wa_vbap   TYPE ty_vbap,
        wa_lips   TYPE ty_lips,
        wa_pbim   TYPE ty_pbim,
        wa_pbhi   TYPE ty_pbhi,
        wa_ekko   TYPE ty_ekko,
        wa_ekpo   TYPE ty_ekpo,
        wa_eket   TYPE ty_eket,
        wa_plaf   TYPE ty_plaf,
        wa_aufk   TYPE ty_aufk,
        wa_afko   TYPE ty_afko,
        wa_afpo   TYPE ty_afpo,
        wa_afvc   TYPE ty_afvc,
        wa_afvv   TYPE ty_afvv,
        wa_mdvm   TYPE ty_mdvm.
DATA : it_object TYPE hum_object_t,
        wa_object TYPE hum_object,
        it_item   TYPE hum_hu_item_t,
        wa_item   TYPE vepovb,
        count1(6) TYPE n.
DATA : gv_objek TYPE ausp-objek.       "Put matnr for use in FM u2018CLAF_CLASSIFICATION_OF_OBJECTSu2019
DATA : BEGIN OF it_sclass OCCURS 0.
        INCLUDE STRUCTURE sclass.
DATA : END OF it_sclass.
DATA : BEGIN OF it_clobjdat OCCURS 0.
        INCLUDE STRUCTURE clobjdat.
DATA : END OF it_clobjdat.
*& Include           ZPPR_CONVSTAT_SEL_CRITERIA
SELECTION-SCREEN FOR 'PLANNING STAGE'
SELECTION-SCREEN BEGIN OF BLOCK main WITH FRAME TITLE text-001.
PARAMETERS: mrpntdn RADIOBUTTON GROUP sel                    DEFAULT 'X' user-command flag,
              pldord RADIOBUTTON GROUP sel,
              prdord RADIOBUTTON GROUP sel.
SELECTION-SCREEN END OF BLOCK main.
SELECTION-SCREEN FOR 'SELECTION BY PLANT AND PLANT DATA'
SELECTION-SCREEN BEGIN OF BLOCK plant WITH FRAME TITLE text-002.
PARAMETERS      : p_werks   LIKE ioheader-werks OBLIGATORY DEFAULT '1100' MATCHCODE OBJECT H_T001W.
SELECT-OPTIONS : so_matnr FOR   ioitem-matnr                              MATCHCODE OBJECT MAT1.
PARAMETERS      : so_mtart TYPE t134-mtart     OBLIGATORY DEFAULT 'ZFIN' MATCHCODE OBJECT H_T134.
SELECT-OPTIONS : so_plnum FOR   ioitem-plnum                              MATCHCODE OBJECT plnum MODIF ID pld,
                    so_aufnr FOR   ioheader-aufnr                            MATCHCODE OBJECT orde   MODIF ID prd.
PARAMETERS      : p_prdsta LIKE tj02t-txt04                                                       MODIF ID prd.
SELECTION-SCREEN END OF BLOCK plant.
SELECTION-SCREEN FOR 'SELECTION BY REQUIREMENT TYPE'
SELECTION-SCREEN BEGIN OF BLOCK reqtyp WITH FRAME TITLE text-003.
PARAMETERS      : cb_so     TYPE AUSWL_EB AS CHECKBOX USER-COMMAND flag,
                    cb_sto    TYPE AUSWL_EB AS CHECKBOX USER-COMMAND flag,
                    cb_pir    TYPE AUSWL_EB AS CHECKBOX USER-COMMAND flag.
SELECTION-SCREEN END OF BLOCK reqtyp.
SELECTION-SCREEN FOR 'SELECTION BY DATE AND REQUIREMENT TYPE NOS'
SELECTION-SCREEN BEGIN OF BLOCK dtreqtypno WITH FRAME TITLE text-004.
SELECT-OPTIONS : so_crtdt FOR vbak-erdat                                                                MODIF ID gen,
                    so_vbeln FOR vbap-vbeln                                  MATCHCODE OBJECT WTY_F4_VBAP MODIF ID rso,
                    so_posnr FOR vbap-posnr                                                                MODIF ID rso,
                    so_ebeln FOR ekub-ebeln                                  MATCHCODE OBJECT MEKKM        MODIF ID rst,
                    so_ebelp FOR ekub-ebelp                                                                MODIF ID rst,
                    so_pbdnr FOR pbim-pbdnr                                                                MODIF ID rpi,
                    so_reqdt FOR vbep-edatu                                                                MODIF ID gen.
SELECTION-SCREEN END OF BLOCK dtreqtypno.
SELECTION-SCREEN FOR 'SELECTION BY OTHER PARAMETERS'
SELECTION-SCREEN BEGIN OF BLOCK othrparam WITH FRAME TITLE text-005.
SELECT-OPTIONS : so_kunnr FOR kna1-kunnr                                   MATCHCODE OBJECT debi   MODIF ID rso,
                    so_auart FOR tvak-auart                                   MATCHCODE OBJECT H_TVAK MODIF ID rso,
                    so_lfsta FOR vbup-lfsta                                                           MODIF ID rso.
SELECTION-SCREEN END OF BLOCK othrparam.
*& Include           ZPPR_CONVSTAT_PBO
*&   Event AT SELECTION-SCREEN OUTPUT
AT SELECTION-SCREEN OUTPUT.
IF mrpntdn = 'X'.
    LOOP AT SCREEN.
      IF ( screen-group1 = 'PLD' OR screen-group1 = 'PRD' ).
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSEIF pldord = 'X'.
    LOOP AT SCREEN.
      IF screen-group1 = 'PLD'.
        screen-intensified = 1.
        MODIFY SCREEN.
      ENDIF.
      IF screen-group1 = 'PRD'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSEIF prdord = 'X'.
    LOOP AT SCREEN.
      IF ( screen-group1 = 'PLD' OR screen-group1 = 'PRD' ).
        screen-intensified = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
IF ( cb_so = ' ' AND cb_sto = ' ' AND cb_pir = ' ' ).
    LOOP AT SCREEN.
      IF ( screen-group1 = 'GEN'
      OR screen-group1 = 'RSO'
      OR screen-group1 = 'RST'
      OR screen-group1 = 'RPI' ).
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
IF cb_so = 'X'.
    LOOP AT SCREEN.
      IF screen-group1 = 'RSO'.
        screen-active = 1.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
    IF cb_sto = ' '.
      LOOP AT SCREEN.
        IF screen-group1 = 'RST'.
          screen-active = 0.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    ENDIF.
    IF cb_pir = ' '.
      LOOP AT SCREEN.
        IF screen-group1 = 'RPI'.
          screen-active = 0.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    ENDIF.
ELSEIF cb_sto = 'X'.
    IF cb_so = ' '.
      LOOP AT SCREEN.
        IF screen-group1 = 'RSO'.
          screen-active = 0.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    ENDIF.
    IF cb_pir = ' '.
      LOOP AT SCREEN.
        IF screen-group1 = 'RPI'.
          screen-active = 0.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    ENDIF.
ELSEIF cb_pir = 'X'.
    IF cb_so = ' '.
      LOOP AT SCREEN.
        IF screen-group1 = 'RSO'.
          screen-active = 0.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    ENDIF.
    IF cb_sto = ' '.
      LOOP AT SCREEN.
        IF screen-group1 = 'RST'.
          screen-active = 0.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    ENDIF.
ENDIF.
*& Include           ZPPR_CONVSTAT_START_SELECTION
*&   Event START-OF-SELECTION
IF mrpntdn = 'X'.
PERFORM start_of_selection_mrpntdn.
ELSEIF pldord = 'X'.
PERFORM start_of_selection_pldord.
ELSEIF prdord = 'X'.
PERFORM start_of_selection_prdord.
ENDIF.
*& Include           ZPPR_CONVSTAT_F_START_OF_SEL
*&      Form START_OF_SELECTION
      Subroutine for MRP NOT DONE
FORM start_of_selection_mrpntdn.
    SELECT mdkey INTO TABLE it_mdvm FROM mdvm
                 WHERE GSAEN = 'X'
                   AND AKKEN = 'X'.
      IF sy-subrc = 0.
        LOOP AT it_mdvm INTO wa_mdvm.
          wa_mdvm-disst = wa_mdvm-mdkey(3).
          wa_mdvm-matnr = wa_mdvm-mdkey+3(18).
          wa_mdvm-plwrk = wa_mdvm-mdkey+21(4).
          MODIFY it_mdvm FROM wa_mdvm INDEX sy-index TRANSPORTING disst matnr plwrk.
        ENDLOOP.
      ENDIF.
ENDFORM.
*&      Form START_OF_SELECTION
      Subroutine for PLAN ORDER CREATED
FORM start_of_selection_pldord.
ENDFORM.
*&      Form START_OF_SELECTION for PRODUCTION ORDER CREATED
      Subroutine for PRODUCTION ORDER CREATED
FORM start_of_selection_prdord.
ENDFORM.

You need to mention START-OF-SELECTION explicitly in your code.
Change your code as below:
*& Event START-OF-SELECTION
START-OF-SELECTION.
IF mrpntdn = 'X'.

Output type is not getting triggered for ship to party in shippment output

Hi,
we have maintained output determination procedure for shipments. It was working fine.
We have just added new condition table to access sequence, and maintained the condition records also for condition type ZABC. I have checked in NACE, Application V7, I am able to find the condition type. checked in VV73, condition records displayed. But in VT02N/VT03N, we are unable to get print for the output type.
Why this is happening? we are able to see the procedure, condition type, access sequence, condition records in place ...why condition type ZABC is not getting triggered in the shipment output.
Please advise and let me know if you need more details....thanks in advance.
Thanks,
SS

Hi Noel,
Thanks for your time and reply.
We have output determination procedure for shipments, condition type ZABC, Access sequence ZABC, Condition tables 550,600,650,700 already maintained. output is working fine.we have a new requirement and created new condition table 700 with the fields" Ship to party and transportation planing point "(Condition table 700 ). we assigned the condition table 700 to access sequence ZABC. Condition type ZABC already placed in Output determination procedure.
We test the output, new condition record is not triggering in the output, even in output determination analysis also, we are unable to see the record 700 for the condition type ZABC. we are not sure what is the reason for the condition table that is not picking up ? Why condition type ZABC with condition record 700 not visible in output determination analysis.
I have checked condition records, output determination procedure. Please advise and let me know you need more details.
Thanks,
SS

Escalation not getting triggered in Alert

Hi
I have triggered an alert from BPM which is successfully received both in my mail box as well as Alert inbox.
If the Alert is not confirmed, it should trigger an Escalation. In the Alert configuration I have maintained the recipient of the Escalation message, the tolerance limit and also have checked "Escalation Active"
But the Escalation is not getting triggered. Kindly advice...
Anup

Hi Anup,
Please go through these..
http://help.sap.com/saphelp_nw2004s/helpdata/en/96/f1033c128f4a7de10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/4a/2dc1e0778648afa9e69d9a44244def/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
cheers,
Prashanth

IDOC - Function Exit not getting triggered

I am doing an inbound IDOC for the message type WMMBXY and using basic type WMMBID02.
This is for goods movement based on PO.
I am doing an enhancement in the includeof the function module exit EXIT_SAPLLMDE_002.
This exit is supposed to get triggered for the message type WMMBXY.
when i tested the idoc in we19 it is sucessfully getting posted. I want to check my code in EXIT_SAPLLMDE_002. I have set breakpoint and tested using we19. But this is not getting triggered. But the idoc is getting sucessfully posted but with a status message 56 An inbound partner profile could not be found( I am not sure if this has something to do with above problem).

Did you attach your exit to a CMOD project and activated the same(CMOD transaction)?
The error you see regarding the partner profiles is probably due to the non existance of a partner profile for your idoc type in we20 transaction.
Maintain the inbound partner profile in we20 transacttion.

Refresh itab is not getting triggered

Similar Messages

Maybe you are looking for