Refresh rate settings

I got a monitor 20.1" Samsung SyncMaster 204b, which blinks on and off when using 1600x1200 60Hz resolution.
After extensive search I found information that setting the refresh rate to 56Hz would help, but unfortunately that option is grayed out in OSX 10.4.9. I downloaded SwitchResX program and modified the refresh rate via that and it worked! Now the problem is that the SwitchResX is about $15-20USD and to me it feels kind of silly to pay money for grayed out option that I should be able to use.
How can I enable this option and use OSX regular way to set my monitor refresh rate to 56Hz?
Mac Mini Mac OS X (10.4.9)

Here is the specs for the Mac Mini I have: http://www.everymac.com/systems/apple/macmini/stats/mac_mini_g41.5.html
Well, unfortunately mine does not work unless the refresh rate is set to 56Hz. I searched internet quite a lot and it seems that Samsung SyncMaster 204B (or at least some models) does have this problem. I have two of these monitors for my company, as they were cheap and work well with my laptops. Now when I tried both of them on my Mac Mini the problems appeared.
Back to the original question, how can I force my OSX to use 56Hz instead of the manufacturer default setting? The option is grayed out for some reason and with the application mentioned in first post I was able to change that. That application costs money and it feels kind of silly to pay for grayed out refresh rate option.

Similar Messages

Refresh rate isn't preserved

Hello there,
I am using a 120hz monitor with a nvidia card, and I am trying to keep my refresh rate settings. I've launched nvidia-settings as root and saved the settings (which work fine for the session after setting the proper settings and pressing apply, but don't apply after rebooting) as both /etc/X11/xorg.conf and /etc/X11/xorg.conf.d/10-nvidia.conf. I have tried with both files, and with only one at a time, to no avail.
The refresh rate is already back at 60 when gdm launches (I confirm it by moving my mouse around; there is a clear visible difference).
Any recommendations?

If running nvidia-settings once you've logged in solves the problem you can put:
nvidia-settings -l &
into your autostart or .xinitrc file (depends on your DE/WM and how you start it) to get it to run on login.

Second monitor has a 50Hz refresh rate; my mac's lowest output is 60. What can I do?

I'm trying to get my 13" Late-2011 macbook pro to work with either of two second monitors so I can use logic more easily. One's a DELL thing with a screen res of 1280x1024 (though does work on some higher res') which I had working yesterday till I accidentally knocked the adaptor the slightest bit and now I can't make the second screen stay on for more than a few seconds whatever settings I try. Usually the monitor is on (ie not in power save mode) but just displaying nothing, and my mac behaves as if the second monitor is there.
The other one's a Toshiba 20WLT56B Tv with VGA input. The prob with this one is that it's refresh rate is 50Hz and the lowest option I have for my mac is 60Hz. Is there any way to allow me to output at 50Hz instead?
Cheers

if it's a message coming from your yahoo account, it means that your account has been compromised, not your phone itself. i would suggest changing the password for your email account

IPad Air display refresh rate for full screen movies?

What exactly happens if I play a movie on the iPad full screen with a rate of e.g. 24p, 25p or 50i?
The stated maximal refresh rate is 60Hz.
Will this rate be reduced when playing movies?
Or will frames be dropped / interpolated if the frame rate and the refresh rate don't match?
Or will the movie be sped up / slowed down?
When using the HDMI adapter, I can see that it always outputs 60p, regardless of the movie frame rate. But maybe this is different on the internal panel.
Thanks for any insight!

Should it happen again double tap the screen with three fingers. Then go to settings> general> accessibility> zoom> off.

How to change screen refresh rate in windows 7sp1 and windows 8.1 iso image using dism

sir when i install windows 7sp1 and windows 8.1 then after the completion of setup when first time windows boots up then task bar is not shown and display is not clear and when i check under monitor settings the screen refresh rate is 60 Hertz and when i
set the screen refresh rate from 60 Hertz to 75 Hertz, then everything is OK, plz tell me why this happens?
why windows 7 sp1 and windows 8.1 automatically sets the screen refresh rate to 60Hertz instead of 75Hertz.
how can i set screen refresh rate 75 Hertz permanently in iso image using DISM ?

That is not a function of DISM. Resolution and refresh rate capabilities can be determined by multiple causes. Drivers are one, another is that most modern displays will report their capabilities to Windows.
You can specify display settings with an answer file however:
<Display>
<HorizontalResolution>640</HorizontalResolution>
<VerticalResolution>480</VerticalResolution>
<ColorDepth>16</ColorDepth>
<RefreshRate>60</RefreshRate>
</Display>
http://technet.microsoft.com/en-us/library/ff716344.aspx

Max refresh rate Macbook PRO -- LG TV

Hello,
I am connecting my LG LN5700 TV with a max refresh rate of 120 Hz to my Macbook Pro via HDMI using the cables listed below. However, the display settings on connection only show option for frequency upto 60 Hz (and mentions NTSC in paranthesis). Any ideas why I am not able to access the max refresh rate ? The HDMI cable claims to support higher refresh rates. Could the mac_disp --> HDMI be the bottleneck ?
http://www.amazon.com/BlueRigger-High-Speed-Cable-Ethernet/dp/B005LQ83EI/ref=pd_ sim_e_3
and
http://www.amazon.com/SANOXY%C2%AE-DisplayPort-Female-Adapter-Macbook/dp/B002HU6 29E/ref=sr_1_1?s=electronics&ie=UTF8&qid=1380782738&sr=1-1&keywords=SANOXY%C2%AE +Mini+DisplayPort+to+HDMI+Female+Adapter+Cable+for+Apple+Macbook%2C+Macbook+Pro...
Thanks

Not that I know of... for display on my LG TV, I used to use a Thunderbolt/Mini DisplayPort -> HDMI adapter. But I ran it through the HDMI on my Denon reciever and then to my LG TV. If you've an extra HDMI port on your LG, you could use the same adapter -> here.
Good luck,
Clinton

Xorg and refresh rates

I'm running Solaris Express 10 x86 4/05 on a Dell Optiplex GX260. Xorg refuses to give me a refresh rate higher than 60Hz. This is using the i810 driver but it also happens with the VESA driver. Here's my xorg.conf:
Section "Module"
# This loads the DBE extension module.
    Load        "dbe"   # Double buffer extension
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
    SubSection "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
# This loads the font modules
    Load        "bitstream"
    Load        "type1"
#    Load        "speedo"
# This loads the Xst module
     Load       "Xst"
# This loads the SolarisIA module
     Load       "IA"
# This loads the GLX module
#    Load       "glx"
# This loads the DRI module
#    Load       "dri"
EndSection
# Files section. This allows default font and rgb paths to be set
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
    RgbPath     "/usr/X11/lib/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
    FontPath   "/usr/X11/lib/X11/fonts/TrueType/"
    FontPath   "/usr/X11/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11/lib/X11/fonts/Type1/sun/"
    FontPath   "/usr/X11/lib/X11/fonts/F3bitmaps/"
    FontPath   "/usr/X11/lib/X11/fonts/misc/"
    FontPath   "/usr/X11/lib/X11/fonts/100dpi/"
    FontPath   "/usr/X11/lib/X11/fonts/75dpi/"
#    FontPath   "/usr/X11/lib/X11/fonts/local/"
#    FontPath   "/usr/X11/lib/X11/fonts/Speedo/"
#    FontPath   "/usr/X11/lib/X11/fonts/freefont/"
# The module search path. The default path is shown here.
#    ModulePath "/usr/X11/lib/modules"
EndSection
# Server flags section.
Section "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#    Option "NoTrapSignals"
# Uncomment this to disable the <Crtl><Alt><Fn> VT switch sequence
# (where n is 1 through 12). This allows clients to receive these key
# events.
#    Option "DontVTSwitch"
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#    Option "DontZap"
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#    Option "Dont Zoom"
# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.
#    Option "DisableVidModeExtension"
# Uncomment this to enable the use of a non-local xvidtune client.
#    Option "AllowNonLocalXvidtune"
# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.
#    Option "DisableModInDev"
# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).
#    Option "AllowNonLocalModInDev"
EndSection
# Input devices
# Core keyboard's InputDevice section
Section "InputDevice"
    Identifier "Keyboard1"
    Driver      "Keyboard"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
#    Option     "Protocol"      "Xqueue"
    Option "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option     "Xleds"      "1 2 3"
#    Option "LeftAlt"     "Meta"
#    Option "RightAlt"    "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option "XkbModel"    "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option "XkbModel"    "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option "XkbLayout"   "de"
# or:
#    Option "XkbLayout"   "de"
#    Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
#    Option "XkbRules"    "xorg"
#    Option "XkbModel"    "pc105"
#    Option "XkbLayout"   "us"
#    Option "XkbVariant" ""
#    Option "XkbOptions" ""
#    Option "XkbDisable"
    Option "XkbRules"   "xorg"
    Option "XkbModel"   "pc101"
    Option "XkbLayout" "us"
EndSection
# Core Pointer's InputDevice section
Section "InputDevice"
# Identifier and driver
    Identifier "Mouse1"
    Driver      "mouse"
    Option "Protocol"    "Auto"
    Option "Device"      "/dev/mouse"
# Mouse-speed setting for PS/2 mouse.
#    Option "Resolution"        "256"
# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.
#    Option "Protocol" "Xqueue"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
#    Option "BaudRate" "9600"
#    Option "SampleRate"        "150"
# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    Option "Emulate3Buttons"
#    Option "Emulate3Timeout"    "50"
# ChordMiddle is an option for some 3-button Logitech mice
#    Option "ChordMiddle"
EndSection
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
#    Identifier "Mouse2"
#    Driver      "mouse"
#    Option      "Protocol"      "MouseMan"
#    Option      "Device"        "/dev/mouse2"
# EndSection
# Section "InputDevice"
#    Identifier "spaceball"
#    Driver     "magellan"
#    Option     "Device"        "/dev/cua0"
# EndSection
# Section "InputDevice"
#    Identifier "spaceball2"
#    Driver     "spaceorb"
#    Option     "Device"        "/dev/cua0"
# EndSection
# Section "InputDevice"
#    Identifier "touchscreen0"
#    Driver     "microtouch"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "1412"
#    Option     "MaxX"          "15184"
#    Option     "MinY"          "15372"
#    Option     "MaxY"          "1230"
#    Option     "ScreenNumber" "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonNumber" "1"
#    Option     "SendCoreEvents"
# EndSection
# Section "InputDevice"
#    Identifier "touchscreen1"
#    Driver     "elo2300"
#    Option     "Device"        "/dev/ttyS0"
#    Option     "MinX"          "231"
#    Option     "MaxX"          "3868"
#    Option     "MinY"          "3858"
#    Option     "MaxY"          "272"
#    Option     "ScreenNumber" "0"
#    Option     "ReportingMode" "Scaled"
#    Option     "ButtonThreshold"       "17"
#    Option     "ButtonNumber" "1"
#    Option     "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
Section "Monitor"
    Identifier "My Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    HorizSync   30-85
#    HorizSync 30-64         # multisync
#    HorizSync 31.5, 35.2    # multiple fixed sync frequencies
#    HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
    VertRefresh 48-120
EndSection
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
Section "Device"
    Identifier "Standard VGA"
    VendorName "Unknown"
    BoardName   "Unknown"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
#    Chipset    "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
    Driver     "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
#    BusID      "PCI:0:10:0"
#    VideoRam   256
#    Clocks     25.2 28.3
EndSection
# Device configured by xorgconfig:
Section "Device"
    Identifier "** Intel i810 (generic)               [i810]"
    Driver      "i810"
    VideoRam    8192
    # Insert Clocks lines here if appropriate
EndSection
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
    Identifier "Screen 1"
    Device      "** Intel i810 (generic)               [i810]"
    Monitor     "My Monitor"
    DefaultDepth 24
    Subsection "Display"
        Depth       8
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "1024x768"
        ViewPort    0 0
    EndSubsection
EndSection
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
Section "ServerLayout"
# The Identifier line must be present
    Identifier "Simple Layout"
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
    Screen "Screen 1"
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection
# Section "DRI"
#    Mode 0666
# EndSectionIf I use the Xsun server, everything works great. I get 1024x768 at 85Hz. With Xorg, I get 1024x768 at 60Hz. Why won't Xorg drive the display at a decent refresh rate?
Thanks.

I upped the log verbosity on Xorg and checked the Xorg.0.log file. I found some interesting things.
First, I found this line:
(II) I810(0): Will use BIOS call 0x5f05 to set refresh rates for CRTs.
Later on, I found these:
(WW) I810(0): Extended BIOS function 0x5f05 not supported.
(II) I810(0): BIOS call 0x5f05 not supported, setting refresh with VBE 3 method.
(WW) I810(0): Set VBE Mode rejected this modeline.
Trying standard mode instead!
Presumably, "standard mode" is an eye-watering 60Hz.
This is on a Dell Optiplex GX260 with BIOS revision A09. The video chipset is an onboard Intel 82845 and the driver is Xorg's i810.
Everything works fine with Sun's X server. I get a nice 87Hz refresh at 1024x768. I'm surprised that Xorg can't set the refresh on this machine. It's listed as Test Suite Level 2 certified in the HCL. Unless somebody can tell me what I'm doing wrong here, I'm going to post this incompatibility as a comment on the HCL.

Judder using Mplayer... maybe force different resolution/refresh rate?

Hi!
(I posted this in the newbie section too, but this is maybe the most appropriate place??)
I've set up my computer as a media center using Freevo. As the main media player in Freevo I use Mplayer. The setup is working beautifully, but I'm getting some judder and it's a bit annoying. It's most noticable during bright, fast moving scenes.
So I've been trying to figure out how to remedy this, but it's harder than I thought. My setup is the following:
AMD 4200+ dual core, 2 gigs ram, Nvidia 7800GTX, 24" LCD and Pioneer LX508D plasma TV, and I'm using CoreAVC as decoder (amazing piece of software )
When I bought the 24" screen for my computer the sales guy (using windows) forced the resolution to 1920x1080. It looked a bit stretched, but if I could do this in Linux I'd avoid having parts of the picture missing on my TV. Now I have to use 1920x1200 resolution as main X session and since my TV is 1920x1080 parts of the desktop is out of view on my TV. This isn't too big of a deal though cause when playing movies they come out in 1920x1080. It'd be nice though to get the correct aspect ratio between my pc screen and my TV (I've been trying to use Twinview and clone, but it's impossible to use 1920x1200 on the 24" and 1920x1080 on the TV at the same time). I've tried to force my pc screen to use 1920x1080 (since it worked in windows it's supposed to be possible), but when I enable it through xorg.conf the screen goes blank. Using nvidia-settings doesn't give me the option of using 1920x1080 on the 24" at all.
So what I'm hoping to be able to do is to force the computer screen to use 1920x1080 and a refresh rate of 72Hz. This should eliminate alot of the judder and at the same time I won't have to use the "PC mode" on my TV (PC mode restrict the Hz to max 60Hz). Hopefully the TV will accept the 1920x1080 72Hz as any input and let me use the normal input (and then be able to use 72Hz... or 96Hz for that matter).
Anyone know how I might be able to do that? I'd really appreciate any help at all since this is the only thing that's not perfect with my setup.

Ok, I tried to change the xorg.conf file to 72Hz on the TV and it when black again. This is what the xorg.0.log shows:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux arch 2.6.25-ARCH #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 19 13:36:04 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 3
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1002,5950 card 103c,2a24 rev 10 class 06,00,00 hdr 00
(II) PCI: 00:02:0: chip 1002,5a34 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:12:0: chip 1002,4379 card 103c,2a24 rev 00 class 01,01,8f hdr 00
(II) PCI: 00:13:0: chip 1002,4374 card 103c,2a24 rev 00 class 0c,03,10 hdr 80
(II) PCI: 00:13:1: chip 1002,4375 card 103c,2a24 rev 00 class 0c,03,10 hdr 00
(II) PCI: 00:13:2: chip 1002,4373 card 103c,2a24 rev 00 class 0c,03,20 hdr 00
(II) PCI: 00:14:0: chip 1002,4372 card 103c,2a24 rev 11 class 0c,05,00 hdr 80
(II) PCI: 00:14:1: chip 1002,4376 card 103c,2a24 rev 00 class 01,01,8a hdr 00
(II) PCI: 00:14:3: chip 1002,4377 card 103c,2a24 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:14:4: chip 1002,4371 card 0000,0000 rev 00 class 06,04,01 hdr 81
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:00:0: chip 10de,0091 card 10de,02c2 rev a1 class 03,00,00 hdr 00
(II) PCI: 02:01:0: chip 13f6,0111 card 153b,1144 rev 10 class 04,01,00 hdr 00
(II) PCI: 02:03:0: chip 10ec,8139 card 103c,2a24 rev 10 class 02,00,00 hdr 00
(II) PCI: 02:04:0: chip 1106,3044 card 103c,2a24 rev 80 class 0c,00,10 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000e000 - 0x0000efff (0x1000) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfa000000 - 0xfcffffff (0x3000000) MX[b]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:20:3), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:20:4), (0,2,2), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000d000 - 0x0000dfff (0x1000) IX[b]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[b]
(II) Bus 2 prefetchable memory range:
[0] -1 0 0xfdd00000 - 0xfddfffff (0x100000) MX[b]
(--) PCI:*(1:0:0) nVidia Corporation G70 [GeForce 7800 GTX] rev 161, Mem @ 0xfa000000/24, 0xd0000000/28, 0xfb000000/24, I/O @ 0xef00/7
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) PCI I/O resource overlap reduced 0x00004100 from 0x0000411f to 0x000040ff
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe0000000 to 0xdfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[1] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[5] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[6] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[8] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[10] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[12] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[13] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[14] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[19] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[20] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[21] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[23] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[24] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[25] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[1] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[5] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[6] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[8] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[9] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[10] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[11] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[12] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[13] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[14] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[15] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[16] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[17] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[18] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[19] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[20] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[21] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[22] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[23] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[24] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[25] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[18] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[19] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[20] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[26] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[27] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[28] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[29] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[30] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[31] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
[32] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.09 Thu Jun 5 00:07:40 PDT 2008
(II) Loading extension GLX
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) NVIDIA dlloader X Driver 173.14.09 Wed Jun 4 23:47:25 PDT 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset NVIDIA GPU found
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[16] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[17] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[18] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[19] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[20] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[21] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[22] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[23] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[24] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[25] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[26] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[27] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[28] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[29] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[30] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[31] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
[32] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[20] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[21] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[22] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[23] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[29] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[30] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[32] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[33] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[34] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
[35] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "NoLogo" "true"
(**) NVIDIA(0): Option "TwinView" "1"
(**) NVIDIA(0): Option "TwinViewOrientation" "Clone"
(**) NVIDIA(0): Option "MetaModes" "DFP-0: 1920x1200 +0+0, DFP-1: 1920x1080_72 +0+0"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "DFP-0"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): TwinView enabled
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce 7800 GTX (G70) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 262144 kBytes
(--) NVIDIA(0): VideoBIOS: 05.70.02.11.20
(II) NVIDIA(0): Detected PCI Express Link width: 16X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce 7800 GTX at PCI:1:0:0:
(--) NVIDIA(0): BenQ G2400W (DFP-0)
(--) NVIDIA(0): PIONEER_PDP. (DFP-1)
(--) NVIDIA(0): BenQ G2400W (DFP-0): 310.0 MHz maximum pixel clock
(--) NVIDIA(0): BenQ G2400W (DFP-0): Internal Dual Link TMDS
(--) NVIDIA(0): PIONEER_PDP. (DFP-1): 155.0 MHz maximum pixel clock
(--) NVIDIA(0): PIONEER_PDP. (DFP-1): Internal Single Link TMDS
(II) NVIDIA(0): Display Devices found referenced in MetaMode: DFP-0, DFP-1
(II) NVIDIA(0): Assigned Display Devices: DFP-0, DFP-1
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "DFP-0:1920x1200+0+0,DFP-1:1920x1080_72+0+0"
(II) NVIDIA(0): Virtual screen size determined to be 1920 x 1200
(--) NVIDIA(0): DPI set to (93, 95); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdefe000 - 0xfdefe7ff (0x800) MX[b]
[5] -1 0 0xfdeff000 - 0xfdeff0ff (0x100) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02b3ff (0x400) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfe02d000 - 0xfe02dfff (0x1000) MX[b]
[9] -1 0 0xfe02e000 - 0xfe02efff (0x1000) MX[b]
[10] -1 0 0xfe02f000 - 0xfe02f1ff (0x200) MX[b]
[11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[b]O
[12] -1 0 0xfb000000 - 0xfbffffff (0x1000000) MX[b](B)
[13] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[14] -1 0 0xfa000000 - 0xfaffffff (0x1000000) MX[b](B)
[15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[19] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[20] -1 0 0x0000dd00 - 0x0000dd7f (0x80) IX[b]
[21] -1 0 0x0000de00 - 0x0000deff (0x100) IX[b]
[22] -1 0 0x0000df00 - 0x0000dfff (0x100) IX[b]
[23] -1 0 0x0000f800 - 0x0000f80f (0x10) IX[b]
[24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[b]
[27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[b]
[28] -1 0 0x00000500 - 0x0000050f (0x10) IX[b]
[29] -1 0 0x0000fa00 - 0x0000fa0f (0x10) IX[b]
[30] -1 0 0x0000fb00 - 0x0000fb03 (0x4) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc07 (0x8) IX[b]
[32] -1 0 0x0000fd00 - 0x0000fd03 (0x4) IX[b]
[33] -1 0 0x0000fe00 - 0x0000fe07 (0x8) IX[b]
[34] -1 0 0x0000ef00 - 0x0000ef7f (0x80) IX[b](B)
[35] -1 0 0x00004100 - 0x000040ff (0x0) IX[b]O
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) NVIDIA(0): Initialized GPU GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "DFP-0:1920x1200+0+0,DFP-1:1920x1080_72+0+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "yes"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "trustda"
(**) Keyboard0: XkbModel: "trustda"
(**) Option "XkbLayout" "no"
(**) Keyboard0: XkbLayout: "no"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
Could not init font path element /usr/share/fonts/Type1, removing from list!
My xorg.conf looks like this now (I don't know what values to use for HorizSync and VertFresh on my TV, the ones that are in there I just made up ):
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildmeister@builder63) Mon May 19 00:34:28 PDT 2008
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dbe"
Load "xtrap"
Load "extmod"
Load "record"
Load "freetype"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "trustda"
Option "XkbLayout" "no"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "BenQ G2400W"
HorizSync 31.0 - 94.0
VertRefresh 50.0 - 85.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "PIONEER_PDP."
# HorizSync 15.0 - 80.0
# VertRefresh 23.0 - 60.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "G70 [GeForce 7800 GTX]"
BusID "PCI:1:0:0"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7800 GTX"
EndSection
Section "Device"
Identifier "Videocard1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7800 GTX"
BusID "PCI:1:0:0"
Screen 1
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
Option "NoLogo" "true"
Option "TwinViewOrientation" "Clone"
Option "TwinView" "1"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "DFP-0: 1920x1200 +0+0, DFP-1: 1920x1080_72 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
I read somewhere that the TV is supposed to be able to show 1080p in 72Hz. But when I try that it goes blank. Maybe it has something to do with the monitor being 1920x1200 and the TV 1920x1080. The monitor won't accept 1920x1080 as resolution so I guess that can only be done in Windows...

Quicktime Video on an LCD Projector Problems & Refresh Rate?

I'm having an issue and don't have a lot of experience with this but hopefully someone has some insight.
When i play back video (formats including DV, DV50, HDV, PRORES422 / interlaced or progressive / frame rates of 23.98 or 29.97) in full screen using Quicktime Player (version 7.4.5) and Present (Shift CMD F) to a projector, the video plays and looks good, with the exception of during certain portions of the video (generally, with a lot of motion), i see either a flicker or what appears to be a scan line, tear, or a trace that scrolls vertically up the image. The flickering/trace is consistent with regard to a particular portion of the video, though when i adjust the refresh rate for the projector, the behavior of the flicker or scrolling trace changes (say at 60hz, it scrolls slowly up vs 85hz where i see mostly flickering/tearing of the image or multiple traces scrolling up). I've tried 3 different projectors, and every combination of screen resolution and refresh rate with no success.
I should point out that when i play these videos full screen on a cinema display (20in or 23in) i don't see this behavior at all.
So, i have a few specific questions:
1. Is anyone familiar with this behavior and any solutions?
2. The projector is connected with a VGA cable and DVI adapter. Might a DVI cable resolve the issue? Is the behavior a result of the analog input? (The cinema displays are connected via DVI and don't exhibit the behavior)
3. If it is a projector issue, any recommendations on a good projector for presenting video played back from a computer?
Thanks in advance for your help. If i've posted in the incorrect forum, please do direct me to the right place.
Shane

Just a fast reply... something to think about...
Use 60hz, most lcd are 60hz. Check you resolution specs for the projector. If the native resolution is 800x600 use that setting if higher use that.....
If your using the lcd as a secondary display try setting the main display to the same specs. Sometime a mismatch between the two displays can cause problems.
Go with the lcd spec settings that's the main priority and the main display isn't.

T61P LCD Refresh Rate keeps resetting to 60 Hz - Also Brightness maxes out

I tried saving a power profile for the resolution, etc., but maybe I didn't know how to save it properly, so whenever just about anything significant happens to my T61P (logout, restart, change something about the video) it ends up reverting to 60 Hz and since I'm using a Philips 19" CRT second display, the 60 Hz refresh rate just doesn't cut it for my eyes.
Speaking of my eyes, the notebook display also reverts to max. brightness frequently, which is annoying.
Does someone know how I can get the rate to lock on 85 Hz and permanently retain the settings I put in for the power profile? I Just reinstalled the Thinkpad Power Manager but honestly I still need to reboot and see if it's better before I make too much of it here. Thanks!

ConnorBehan wrote:
3) If you do not specify a restricted list of modelines, I'm pretty sure all of them will be read from the EDID. I have only one modeline appearing in the output of xrandr and only one appearing in the XFCE display dialog. I do this in the "Display" SubSections where you list all the bit depths.
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
EndSection
I never restricted anything, the modes are simply not there in the EDID. Call it manufacturers safety, I call it manucafturers dumbness. Anyway, what I like is full list of modes from 640x480 to maximum supported with every single refresh rate mode which wont kill my eyes (85+ Hz). Usually the highest modes aren't there even if the display supports them. Missing refresh rate modes are the most typical flaw here.
vacant wrote:You could add something similar somewhere when you start X
vacant: Yes, this is one solution, although not nice, but in this case I get
xrandr: Configure crtc 0 failed
when trying manually added mode, as I already wrote.

LCD refresh rate

I just got my first Mac, so far I'm loving it. I have a 20.1" Viewsonic vx2025 with a horizontal sync range of 30-82 KHz and a vertical refresh range of 50-75 Hz. The Mini correctly set the right native resolution of 1680x1050, but the refresh rate is set to 60, with no other rates available.
I've had a similar struggle with LCDs on Linux (won't go over 60 Hz) and was told that Linux won't do over 60 Hz because that's what LCDs should refresh at. So I wanted to check if Tiger is the same.

If I'm using the term Refresh Rate incorrectly it's because Apple, GNOME/KDE, and Microsoft are all using it incorrectly. If a dialog window to configure my display settings calls a field "Refresh Rate" (and all 4 of them do call it just that) than that's what I call it too.
Core Duo Mini, 2 GB Mac OS X (10.4.5)

PowerMac G4 533DA & HDTV - video resolution / refresh rate problem

Hope someone can help, I need to access more resolution / refresh rates than I currently get in the Leopard display control:
I have a PowerMac G4 533 Digital Audio running Leopard 10.5.8 (unsupported). It has an upgraded AGP videocard, a ( flashed PC - RV200 chipset) Radeon 7500 w/ 64MB and a DVI output w/ a VGA adapter. I have used this Mac perfectly with my 19" widescreen Samsung SyncMaster 940BW, at a resolution of 1440 x 900 / 60Hz / millions of colors. This monitor is actually for my MacPro, but I used it for the G4 to set it up.
I moved it to my living room to use as a basic HTPC. Since it runs Leopard, it has up to date VLC, Quicktime for video files and a working Superdrive for movies. I don't expect it to play anything more than 480p properly, I think that was the best I got on YouTube. But if I have a DVD ripped to DivX or MP4 it plays them fine on the Samsung monitor.
I connected it to my Viewsonic N3760w 37" 1080 HDTV. It turns on, gray screen w/ Apple and gives me a working desktop. The problem is that I cannot get it to give me the correct resolution and more importantly it seem to have the wrong refresh rate. It is currently set at 1280 x 768 / 60Hz / millions of colors. The screen give me like a small line slowly moving up across screen, higher refresh rates only make it movie faster up the screen.
According to my Viewsonic, these are the resolutions for computer using the VGA plug on the tv:
PC - 1360x768 (preferred) , 1024x768, 1280x768
Mac G3/G4/G5 - up to 1280 x 1024, 1280x720 (preferred)
Please note all of these are lower resolution than my Samsung monitor. My Viewsonic also has on screen adjustment of " phase " and " frequency " as well as the usual color, contrast, etc available. Is there a 3rd party app to manually adjust the resoluion and refresh rate? I have seen Windows programs, does one exist for Mac OS X?
TIA, sorry for the long post

My Viewsonic also connected by VGA, no problem.
I wish I knew more. I checked out the app you did a trial of. I noticed this statement on their web site: Quote
"After rebooting monitor stays blank
For some reason your monitor does not accept the installed frequency. SWITCH IT OFF!"
This is the type of statement that would 'worry me.' -- having the phrase: SWITCH IT OFF! all in caps seems to imply a possibility of damage...which I mentioned in my initial post. (and the site goes on to talk about how you should even then connect another monitor to change the settings you've made that were not accepted).
As I said, though, I wish I knew more for sure about this. It seems that you not only did the obvious of checking System Peferences>Display, but also realize the Viewsonic has buttons that can influence it's screen image, most about position of the image on the screen but at least one item about resolution on mine. (under Setup Mode)
For what it's worth, my Viewsonic is about 6 years old now, still fine, and has eight (8) possible resolutions shown in System Preferences.
Re: Your numbers.
It is currently set at 1280 x 768 / 60Hz / millions of colors.
PC - 1360x768 (preferred) , 1024x768, 1280x768
Mac G3/G4/G5 - up to 1280 x 1024, 1280x720 (preferred)
If you're only talking about a difference of 1280 x 768 and G4 1280 x 1024, perhaps just stretching the picture using the Viewsonic buttons is the way to go.
Or, from the numbers, perhaps the G4 just wants a resolution closest to it's preferred state!?
Anyhow, good luck.

Increase refresh rate of my LCD display

Hey hey hey. How can I increase the refresh rate available for my LCD display? Should I increase the refresh rate? I cannnot find where to change it.

There are different refresh rates that you can set, but I agree, 60 should be adquate. You can check this under Control Panel, Display, Settings, Then Click on Advanced, then Monitor. There you will see the refresh rate. Unclick the "Hide modes..." and you will see other rates which may not be able to be applied to your machine.

Sony KDL32W4000 - missing bits on overscan; blurry; refresh rate

I've connected the mini to the TV (which is a full 1920x1080 HD set) - using mini-DVI to DVI-D to HDMI.
When in overscan I'm missing the edges of the screen - the menu bar at the top is outside the physical border of the screen but is usable (ie I can use the mouse in the border of the screen but can't see either the mouse or the top line of the menu). When it's not in overscan I'm using about three quarters of the screen.
Is there a way to make it fit the screen within the physical borders of the set (ie using overscan but keeping the borders of the screen within the physical boundaries of the set - or turning overscan off but expanding the screen out to the boundaries of the set).
It is, I think, a 100hz set but in display options I'm only seeing 60hz - is there a way to increase the refresh rate when used by the mini?
The screen fonts are also a bit blurry - any tips on who to improve visual acuity?
I haven't upgraded to 10.5.7 at this stage due to the problems people have been having with it - will do so once I do a time machine backup of the current setup.
Thanks.

Answering my own questions again - you get the full screen filled out to (but not past) the borders of the set if you set the display area to full pixel rather than "normal" (press Home on the remote then navigate using XMB to settings) and then on the Mini set the Mini's display prefs to overscan. The full pixel setting only affects the TV when it is getting a signal from the pc and doesn't apply when it is used as a TV (so no need to reset it when you want to use the TV as a telly). The font still isn't amazing but this may be due to me sitting further back than I'm used to.

X misdetects LG Flatron F700B as 775FT - 50hz refresh rate

Hi;
I acquired a LG Flatron F700B today and hooked it up (nice, sharp picture, much nicer to stare at than my venerable, fuzzy Benq V772.) The issue here is that according to nvidia-settings, my computer thinks that this is a LG 775FT.
This wouldn't be so bad, but there's a distinct difference in specifications between the two monitors - the F700B does max. 1280x1024 @ 85Hz, but the 775FT (which X seems to think I have) only does 1280x1024 @ 60Hz. Interestingly, xrandr reports the maximum resolution as 1280x1024 @ 50Hz.
As you can imagine, 50/60Hz makes ones eyes bleed... I've tried editing the Monitor section in xorg.conf with appropriate sync ranges taken from the monitor specs at link [1], but apparently new versions of X just go ahead and autodetect the monitor anyway, which is actually working against me here (autodetection is nice, but only when it detects the Right Thing.)
nvidia-settings only lets me push the monitor up to 60hz.
Does anyone have any suggestions as to how I can 'persuade' X that my monitor Really Can Do 1028x1024 @ 85hz? I'm tempted to take a cudgel to it and see if it plays nice
Cheers;
-lws
[1] : http://www.superwarehouse.com/LG_Electr … /ps/141938

Nvidia actually uses refresh rate to report a completely different property, something to do with twinview mode and compatibility with TVs and such - that's why you shouldn't really worry about what xrandr says... You can use nvidia-settings to see what the actual refresh rate is, it most certainly isn't 50hz. If that figure bothers you you can add something like this to the device section in xorg:
Option "DynamicTwinView" "False"
This will not actually change how the image is displayed but it will make xrandr return the actuall refresh value.
This is what nvidia manual has to say about this:
Option "DynamicTwinView" "boolean"
Enable or disable support for dynamically configuring TwinView on this X screen. When DynamicTwinView is enabled (the default), the refresh rate of a mode (reported through XF86VidMode or XRandR) does not correctly report the refresh rate, but instead is a unique number such that each MetaMode has a different value. This is to guarantee that MetaModes can be uniquely identified by XRandR.
When DynamicTwinView is disabled, the refresh rate reported through XRandR will be accurate, but NV-CONTROL clients such as nvidia-settings will not be able to dynamically manipulate the X screen's MetaModes. TwinView can still be configured from the X config file when DynamicTwinView is disabled.
Default: DynamicTwinView is enabled.

Refresh rate settings

Similar Messages

Maybe you are looking for