Refresh System Data in Integration Directory PI 7.11

Hey,
I have setup a new technical system and a business system in SLD, but now I still can't find it in Integration Directory.
I knew from the later PI Version, that there was an option to transfer SLD data to integration directory, but now I can't find it
anymore.
Can anybody help?
Thanks!
Michael

I have setup a new technical system and a business system in SLD, but now I still can't find it in Integration Directory.
I knew from the later PI Version, that there was an option to transfer SLD data to integration directory, but now I can't find it
Tools (or right-click in ID) --> Assign Business System --> follow the wizard...it will assign the business system from SLD to ID

Similar Messages

Basis: No service for system , client in Integration Directory??

Hi All,
IDocs from SAP QA are not being sent to PI QA. I see error in SM58 in SAP QA as: No service for system , client in Integration Directory. Please dont jump to asnwers by looking at above error. I could fix that, but thats not the real problem.
Because I have checked
1) SLD home page ---> Technical Landscape --> Select Web AS ABAP --> Select the technical system --> Clients ---> Click on the client used as Business system --> Here look for the logical system is defined (No Problem here, as logical systems is defined).
2) ID---> Click on Objects --> Service Without party/Party > Double click on business system>On the tright side--> Service --> Adapter specific Identifiers ---> Check IDoc Adpater, Logical System (No Problem here as I see Logical System).
But I can't find values R/3 System ID and Client under "IDoc Adapter and RFC Adapter". I think thats problem here, when I click on "Compare with SLD" in edit mode, values are not getting populated into R/3 System ID and Client. It makes think there is communication error from ID to SLD. How I do confirm if its the real problem?
3) Checked Note 940313 - IDoc adapter: Error messages in SM58, No problem here
4) Did SLDCHECK from PI QA, works fine, no problems here
Both PI DEV and PI QA pointing to the same SLD. When I send IDocs from SAP QA to PI DEV, everything works fine. I can't send IDoc from SAP QA to PI DEV (changed RFC des to point to PI QA, it shouldn't be a problem).
How do I find out if communication between PI QA - ID is workign fine with the SLD? Is there any other issue you can think of causing the above error?
Thank You,
Indrasena Janga

*I have trobleshooted a similar issue. In my case also the tRFC failed with the error "No service for system SAP, client 400 in Integration Directory".There were 11 IDOCS associated with this tRFC and when I saw control record of first IDOC,in sender information ,the sender partner number was wrong.Instead of "SAPSID",it was found as just "SAP".Where as the remaining ten were maintained with correct sender partner number.remaining ten IDOCS were dependant on first one.
Thanks,
Varada Reddy

Attempt to fetch cache data from Integration Directory failed

HI,
while checking cache connectivity testing: status is
 green: Integration Repository
 green: Integration Directory
 green: Integration Server - JAVA
 red:Adapter Engine af.axd.aipid
 yello:Integration Server - ABAP
Jun 30, 2007 1:16:08 PM - Cache notification from Integration Directory received successfully
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.00.aipid, string], target element type: SAP_BusinessSystem)
[Data Evaluation]: GlobalError
what to do?
and there is nothing under integration server and integration engine but there is an green status under Non-Central Adapter Engines > from this i am doing send messeage testing fro xi to bi ,
send message to: http://aibid:8000/sap/xi/engine?type=entry
payload:
<?xml version="1.0" encoding="utf-8"?>
<ns1:MI_VCNdatatoBI
xmlns:ns1="http://bi.sap.com"
xmlns:xsi="http://www.w3.org/2001/XMLSchemainstance">
<DATA>
<item>
</BIC/ZG_CWW010>1000<//BIC/ZG_CWW010>
</BIC/ZVKY_CHK>1<//BIC/ZVKY_CHK>
</item>
</DATA>
</ns1:MI_VCNdatatoBI>
i can sent message from there (component monitoring > Non-Central Adapter Engines) but unable to get it at message monitoring and at BI side.
dushyant.

thanks,
but i have adepter type XI
and i am folowing step of this lonk and there is no need to create fild adepter type according to that and almost done but while sending message through config. monitor in RWB it goes but not coming in mess monitoring and at bi side
see 4.5 > 3 and 4 topic and 4.6 > 3,4,5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f027dde5-e16e-2910-97a4-f231046429f2
now what to do?
dushyant,

I am not getting Business System into my Integration Directory.

Hi All!
This is satish, I created Business system in SLD. How to get them in Integration Directory.Please help me.
Thanks in advance!

Hi Satish,
Go to Service without Party->Right Click->Assign Business System->it will show you list of Business Systems created in SLD -> then go ahead
Then
2 options to refresh the cache-
Integration Directory->Environment->Clear SLD Data Cache
Another way is -go to SXI_CACHE / Goto - Business System -> delete the content
Still , if you are not able to see the Business sytem in the Directory, the just go and check in the SLD. If it exists just change and save it.
Then synchronise the same by SLD cache refresh as mentiond.
changing BS
Also refer for more-
Problem in Assigning the Business System
Hope this helps,
Regards,
Moorthy

Who know where store the data about integration Directory objects?

I met some problem which is difficult analysis how to design for ID and find channel status(active or inactive).
I just want to know currect table or stored mechanism.
who does know about this?

Thank your Ahmad.
I just know ID objects.
is it really access by ABAP stack?
I think only access to JAVA stack.
I want make this report.
current status :
Scenarion ABC
Business System
- A
- Channel A
- B
- Channel B
Receive Determination
- C
Interface Determination
- D
Sender Agreement
- E(A)
Receive Agreement
- F(B)
want make this report:
Scenarion ABC
Channel A - E - XI - C - D - F - Channel B

No business system in integration directory error...urgent pl

Scenario: SAP800 to SAP812 via XI3.0 Using Idocs and IDoc adopter.
When I create a business system for SAP800 and SAP812 in integration Directory, it is not visble in the Integration server where I configured the Idoc adopter and thus the Idoc_inbound_asychronous is throwing a error back to SAP800" No service for business system SAP800 in integration Directory".
What may be the problem? And Pl help in Debugging the creation of business system in Integration Directory...
Thanks.

Hi,
make sure that the logical system names are properly assigened to the business systems in the Directory. To to so double click one of your Business Systems and select the menu entry "Adapterspecific Identifiers".
If the logical system name is not maintained here, make sure that it is so in the SLD (check the clients of your technical system in the SLD).
Maintain them, if necessary, clear the SLD Cache in the Directory (Menu: Environment->Clear SLD..), go to the Adapterspecific Identifiers (in edit mode) and click the second button to load the data from the SLD.
Did this fix the problem?
Regards,
Hans Christian

Error while assigning Business Systems in Integration Directory

Hi,
I'm getting an error when trying to assign the business systems in the integration directory.
The error i'm getting exactly is "access to object list of type BusinessSystem using the internalEOAService BusinesSystemAccessor failed " .
I've cleared the SLD_cache and checked it but the same error.
The business systems are appearing when i tried the transaction code SLD_CHECK and is in green status.
what might be the error.

Hey
just want to make sure,are u using communication channel with party or without party.
also make sure that user has sufficient authorizations
http://help.sap.com/saphelp_nw04/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
Thanx
Ahmad
Message was edited by:
Ahmad

Web service via integration engine - integration directory tasks

Hello,
I am new to PI and need help concerning the configuration of web service communication. A new enterprise service shall be exposed to the web. So, service provider is an ABAP AS, consumer is a unknown 3rd party system. Communication should be via the integration server. I have created the data types, message types, interface (query/response) in the enterprise service repository, and the proxy and proxy class in the backend.The corresponding client is already defined as a business system in the integration directory. There are also communication channels of type xi assigned to that business system. I am not sure about the next steps. My assumption:
1) create the 3rd party system as a business component
2) add the new interface to the receiver/sender (where?) tabs of the business component
3) create a communication channel of type SOA and assign it to the new business component (to receiver or sender?)
4) ...enough for now
Probably I forgot something important, but I am not sure... I appreciate any help.
KR
Felix

Here my own "answer" after trying several things.
The reason for the errors above are the namespaces. My incoming message contains some external namespaces which disturb the Integration Engine SOAP processing, but not the J2EE SOAP Adapter.
So I skipped the IE SOAP way, receive the SOAP data via plain HTTP adapter, and remove the SOAP header data in an XSL-Mapping. This gave also some trouble with the namespaces, but after some adaptions finally works fine now.
CSY

Error in Integration Directory

Hi Experts,
In ID When I Go for Environment-->>Cache Notifications
I Got the Following Error

Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time. Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine. This is usually structured as follows: af.<SAP System ID>.<Name of application server>
I Checked With All PI* Users, None of them are Locked.
In The Runtime Workbench Component Monitoring-->> All Components AE, SLD,IR , ID, RTW, Are in the Green State Only.
Here If I Clicked on the Cache Connectivity Test Means It's Giving Error.
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.01.epnwsrv, string], target element type: SAP_BusinessSystem)
Please Resolve this Issue.
10 Points If Problem is Solved
Regards
Khanna

HI Khanna
Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time. Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine. This is usually structured as follows: af.<SAP System ID>.<Name of application server>
did you try to clear the SLD cache in Integration Directory? After that SLD information is newly read and so your biz system will appear.
To clear SLD cache go to menu "Environment" --> "Clear SLD Data Cache".
Have a look at these threads ?
Unable to determine name of central adapter engine
Wrong Adapter engine in RFC Adapter after export/import
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.01.epnwsrv, string], target element type: SAP_BusinessSystem)
Same kind of problem discussed here.. have a look at this thread.. might be helps to you....
Attempt to fetch cache data from Integration Directory failed
Cheers...
Vasu
** REward Points if found useful **

Integration Directory changes not reaching Runtime

Dear all,
I changed a few values on one of the communication channels but is not getting reflected on the runtime. Looks like a cache refresh issue, so I did a 'cache connectivity test' in RWB.
Integration server JAVA and Integration Server ABAP and Central adapter engine are the three entries present under integration directory.
The first two are fine and are in green but the third one(Central adapter engine) is in yellow. The details show
--Cache notification from Integration Directory received successfully (in green)
--Attempt to fetch cache data from Integration Directory not yet started or still in process(yellow)
Tried to refresh the result but it is still in yellow.
So as per the 'how to handle cache' guide, I checked the RFC destination INTEGRATION_DIRECTORY_HMI and it seems to be fine. Also I have checked http://<host name>:<port>/dir/hmidiag/ext?method=info and that seems to be working fine as well
Please can you suggest what could be going wrong or what else need to be checked
Cheers
danus

Danus,
Just check this document and follow the steps given:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Regards,
---Satish

Error in the Integration Directory

Hi All,
In ID When I Go for Environment-->>Cache Notifications
I Got the Following Error
Unable to determine the name of the central Adapter Engine from the System Landscape Directory at this time. Notifications to the central Adapter Engine are therefore listed using the technical name of the Adapter Engine. This is usually structured as follows: af.<SAP System ID>.<Name of application server>
Please Resolve this Issue
Regards
Khanna

Hi Navadeep,
I Checked With All PI* Users, None of them are Locked.
In The Runtime Workbench Component Monitoring-->> All Components AE, SLD,IR , ID, RTW, Are in the Green State Only.
Here If I Clicked on the Cache Connectivity Test Means It's Giving Error.
Attempt to fetch cache data from Integration Directory failed; cache could not be updated
[Fetch Data]: Unable to find an associated SLD element (source element: SAP_XIIntegrationServer, [CreationClassName, SAP_XIIntegrationServer, string, Name, is.01.epnwsrv, string], target element type: SAP_BusinessSystem)
Please let me Know
Regards
Khanna

Value Mapping - Mass replication and Integration Directory interface

Hello all,
The following question is often approched in this forum but answer is never cleary provided. Thus I'm sorry to ask it again.
We are using Value Mapping mass data replication using special interface provided by XI. We can easily see results in cache using Cache Monitoring tool in RWB.
My question is :
Is it possible to see and then to maintain such data (mass replicated) using Integration directory (Tools > Value Mapping menu)
In this menu, we don't see our loaded data.
How to do this ?
Thanks a lot.

Hi Jean-Charles !
We also use VMR, and we find no way to access the cache data from Integration Directory. I think that by design this is not possible.
Value Mapping Replication for Mass Data
http://help.sap.com/saphelp_nw04s/helpdata/en/2a/9d2891cc976549a9ad9f81e9b8db25/frameset.htm
You cannot display the replicated value mapping data in the Integration Directory user interface (see Displaying/Editing the Value Mapping Table) since the original runtime data is stored in the application from which the data is copied. The value mappings created in this way using the user interface of the Integration Directory are just one of many possible sources of data.
Regards,
Matias.
ps: please award points if helpful

No Business Systems refresh in Integration Directory

Hello,
I'm working with an installation of XI NW 7.0 SR3 ABAP+JAVA on Windows
MSSQLServer.
I've created many outbound and inbound interfaces and imported idocs
too in a specific software component.
I've imported the busines system linked to the software componed in
Integration Directory but it didn't contain the I/O interfaces nor
imported idocs.
Result of this is that when I try to use Condition in Interface
Determination this error occured:
Problem loading Schema Description.
Message interface does not exist in any software components installed
on this business system.
Can you help me?
Thanks a lot,
Fabrizio

Hi,
If you get the following msg while selecting the BS in Receiver Determination
"Message interface does not exist in any software components installed on this business system"
1) Open ID-----Double click on Business system that which u are using in the scenario
2) Check whether you are able to see the SWC in the Othere attributes TAB
3) If it is not there means goto SLD----Open the Technical System of R/3 by choosing Web as ABAp type
4) Click on Installed Products TAB
5) Click on Add New product and add your Product of the SWC whcih you are using for developement and Save it
6) Then goto Business systems TAB in the same Technical systems window and click on the Business System appears in the window.
7) Click on Installed products and Check the check box of your Product and then finally save that.
Now you should be able to see the SWC in the Othere attributes TAB in ID
Regards
Seshagiri

Business system from SLD not visible in Integration Directory

Hi,
As on the project I do not have access to the SLD, another team created new business systems there. However, when I try in the Integration Builder(Configuration) to assign the newly created systems, I cannot see them on the "Select business systems" page.
What do you think might be the cause of that? (the SLD and the XI systems are fully customized and have been used successfully until now)
Thanks in advance,
George

Hi,
In Integration directory -> Environment(Menu) ->
Click on Clear SLD Data cache and try again.
If you are unable to get even after doing above step check whether cache is up to date or do full cache refresh. This will solve your problem.
Regards,
Sakthi

Idoc adapter - No service for a system in Integration directory

Hi,
I'm trying to send a custom IDOC from an R3 system to an XI instance.
All settings that I can see using transactions IDX1 IDX2 and IDX5 seems to be correct, but the IDOC doesn't reach the IS.
SM58 in the sender system reports the error:
"No service for system SAPXXX, client nnn in Integration Directory".
Do I have to create the service? How?
Thanks for any suggestion.
Simona

Hi Simona,
you have to create the service. Create first the technical system and the business system in the SLD. Look for the right "Logical System" (Transation SALE in R3).
In the Integration Builder Directory go to "Environment/Clear SLD Data" and create the service by "Objects/Service without party/Business System/Assign Business System".
Regards, Udo

Refresh System Data in Integration Directory PI 7.11

Similar Messages

Maybe you are looking for