Refresh Virtual Machine Job stuck in queue

I have several Jobs of type refresh Virtual Machine Properties, all for the same machine that are not running and I cannot cancel the jobs. The Machine is on and responding and can be managed by PowerShell through winrm. Any help would be appreciated.

Hello,
We have the same problem here, Running Virtual machine manager 2012 R2 Roll-up 1,
We have two jobs running but cannot be cancelled.
stop-scjob .. etc. dont work.
out-put from get-scjob -running
Name                 : Refresh virtual machine properties
Description          : Refresh virtual machine properties
Progress             : 0 %
Status               : Running
CmdletName           : Read-SCVirtualMachine
ErrorInfo            : Success (0)
StartTime            : 3/21/2014 5:54:00 PM
EndTime              :
ErrorInfo            : Success (0)
AdditionalMessages   : {}
ResultName           :
ResultObjectTypeName : Host
IsStoppable          : False
IsRestartable        : False
Error that we get is 1709; but the job is still running and will not be cancelled by timeout

Similar Messages

Wireless print job stuck in queue

C5180 print jobs from network are stuck in queue and won't print. I've reinstalled driver, etc. Does print from a USB cable connection. Any ideas?

I've got a similar problem with the officejet 5510 (multifunction) attached by USB to XP computer. I can print direct (connected by USB) and wirelessly from my windows 7 laptop. I can print direct (USB) from my Mac OS 10.4.11 However, when I print wirelessly from the Mac, the print job shows up in the que on the XP machine with the 5510 attached, but wont print. I have to clear the spool from the command line.
I've set up the 5510 wirelessly by using the advanced windows printing via Samba, by Lpd to the IP address, and by simply adding the printer in the work group. All three ways result in network traffic (I see it on the firewall log) and result in a document queued.
since there is no 5510 officejet (mutlifunction), I have set up the printer with the cups/gutenprint 5.2.7 profiles using several different printers - generic officejet, deskjet 950c, officejet 5110, designjet 5500ps, designjet 5000PS HP 9085MFP.
I can't get the print job out of the queue/spool and into the printer.
Any thoughts?

Share Monitor: Job stuck in queue "Canceling..."

After chosing to export a video, I check the status in Share Monitor and there's a job stuck in the queue in "Canceling..." status that's keeping the new export from starting.
How do I clear the queue?

This other post in the same error isn't helping me.
https://discussions.apple.com/message/15579267#15579267

PSC 1410 - print job stuck in queue

Sometimes my PSC 1410 stops printing part-way through a page: the warning lights "jam" and "cartridge" come on, although the paper path clears after pressing On/Resume when the spoiled sheet emerges (undamaged), and the cartridges are at about half life and have been aligned. Apart from the waste of paper and ink, the great problem is that the stuck job remains in the queue and does not respond to Cancel or Delete: even switching printer and computer off and on still leaves the job stuck in the queue sometimes, when it has been known to restart printing automatically.
Can anybody tell me a sure-fire method of clearing the stuck job out of the queue ?

Try this document for the partial page problem:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00447737&cc=us&lc=en&dlc=en&product=441115
Here is a document referencing the various error light combinations as well:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00476152&tmp_task=solveCategory&lc=en&dlc=en&cc...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Move Virtual Machine Storage stuck "Loading" CSVs

As I understand it the "Move Virtual Machine Storage" screen is supposed to enumerate the CSVs available to the cluster in the bottom left portion of the window. It seems to be stuck on a "Loading..." status and never shows the
CSVs. Also, when I try the "Add Share" button and type in a share to use it doesn't do anything. Thoughts?

Hi,
It sounds like your operations seems lose some steps, please refer the following article for the future compare.
More information:
Appropriate steps for adding a CSV for Hyper-V?
http://social.technet.microsoft.com/Forums/windowsserver/en-US/49732873-8f86-4ea1-a738-32ffedb36eab/appropriate-steps-for-adding-a-csv-for-hyperv
Deploying Cluster Shared Volumes (CSV) in Windows Server 2008 R2 Failover Clustering
http://blogs.msdn.com/b/clustering/archive/2009/02/19/9433146.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Project server 2010: job stuck in queue with state Waiting to be Processed (Sleeping)

Hi,
I have a job in the queue that is stuck. The job type is "TimeSheet Update Resource" and the job state is "Waiting to be processed (Sleeping)". This is happening with only one user. Other users can edit, save, and submit timesheets normally as it appears.
Can't figure out the problem! I tried restarting the queue and timer service with no success. Any suggestions much appreciated.
Thanks,
George

Since you already identified issue is user specific, I think now you need to have a look in to ULS log to undestand really whats happening in the background.
Try editing the user from PWA>>>Server Settings>>Manager users
Click on the user and without making any change click on save, monitor the queue
Hrishi Deshpande – Senior Consultant DeltaBahn
Blog | < |
LinkedIn
Please click Mark As Answer; if a post solves your problem or Vote As Helpful; if a post has been useful to you

Network Print Jobs Stuck in Queue

Hello,
I have, perhaps, the most frustrating problem on the planet. In my home network, I have a HP Color LaserJet 2600n connected to my main PC, with 2 other PC's on the network. All 3 run Windows 7. Printing from my main PC works fine, but if I try to print over the network, the print job always gets stuck in the queue. I can see it stuck in the queue on my main PC, but I can't do anything about it. I can't delete it, nothing. If I restart the spooler, then it magically prints and clears the queue, but it's annoying to have to do that all the time. I've reinstalled the drivers several times to no avail. Tips?
RPGillespie

I have a similar problem, I have a directly connected 1300 and a network P3015. The 1300 is connected via USB, the 3015 is connected by RJ45 cable right to the router. Both printers have their print queues get stuck, but only from my HP Pavilion Elite HPE running HP-installed Windows 7. All the other machines in the office can use the 3015 printer perfectly well. One is an older Pavilion using XP-Pro, another is a Dell using XP-Pro and the third is a Lenovo laptop using Windows 7. All our toners are not refills (seems like a stupid suggestion that the toner cartridge could cause a queue to lock up). The problem is definitely between my machine and the HP printers. I have a Brother printer and a couple of Seiko/Epson printers that all work perfectly fine.
Rebooting several times a day is getting old.

Print jobs stuck in queue using P4015n LaserJet

I setup a P4015n LaserJet printer for one of my clients using the RJ45 connection from the printer. My client has 4 computers 2 Windows 7 64 bit systems, 1 Windows 7 32 bit system and 1 Windows XP 32 bit system. I set the network ip address, subnet mask and default gateway manually on the printer. Sometimes printing from the Windows 7 64 bit systems the jobs get stuck in the queue and you have to delete them before you can print again. The other 2 computers do not have any issues printing and they where setup using the drivers from the CD. I downloaded the latest PCL 6 drivers for the Windows 7 64 bit systems. Looking for some suggestions.
Thanks

Ok the problem happened on one of the 32 bit computers so it is not a 64 bit issue. Still looking for some suggestions.
Thanks

Print jobs stuck in queue after printer goes auto off

Hi all!We have an HP LaserJet M125NW printer in the office, which is connected directly to the network (wired). The problem is, once the printer goes to "auto off" mode, the print jobs get stuck in the queue, and we need to restart the printer every time. After the restart, it works fine, until it goes auto off again. The device has a fix ip, and it can be seen on the network, everything sems okay, but it still doesn't print. I tried different computers, different operating systems, nothing works. Could anyone help me with this annoying situation?

, Welcome to the forums I read about the printing issue you're having with your LaserJet M125NW, that will not seem to wake up when you send the print job to be printed out. Below is what I would first suggest trying. Select Setup, System Setup, Energy Settings, Wake/Auto On Events, and in that menu, select "LAN Job" to see if this will help wake the printer up when you send it a print command. Also ensure you have the power to the unit plugged in directly to a wall outlet. Avoid power bars and surge protectors, which ensures the printer is receiving the full power it needs. Let me know what happens, good luck

How can i delete old print jobs stuck in queue for printer no longer present?

I've deleted the old hp printer from control panel (printers and devices) but the old stuck print jobs are still hanging out there and keep me from printing anything on the new printer. Help please. New printer is Dell V715w

Hi there karen-c,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system is this?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Officejet printer 6700 deleted printer job stuck in queue

Any solution for getting rid of a deleted document from the print queue as it is preventing me from printing new documents. I have already typed NET STOP SPOOLER del /Q /F /S "%systemroot%\System32\Spool\Printers\*.*" NET START SPOOLER in Dos Prompt but it replies by saying it does not recognise ***
This question was solved.
View Solution.

Hi,
From the Desktop, hold down the Windows key and press R. Into the Run window, type services.msc and hit enter. Browse down to the print spooler service, right click it and select Properties then click on the Stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the document has been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Print Job Stuck in Queue - can't print

HP Officejet Pro 8500 A909g Series. Unable to print documents. The HP Solution Center indicates that my desktop and the printer are connect. I attempted to cancel all print jobs. All were cancelled with the exception of one. That job continues to indicate, "Deleting - Printing." I've powered off/on on both the printer and the desktop. Unplugged cable from unit and wall. Waited 10 seconds. It did print a self-test diagnostic page generated from the PC, but it won't print any of my documents. Any suggestions as to what might be the problem and how to resolve it? Thank you.

Hello Mclaugha1,
Thanks for the post. On this one, I've included a couple of links below that should assist you in getting past this error and back to printing. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02205477&cc=us&dlc=en&lc=en&product=3752459&tmp...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=us&dlc=en&lc=en&product=3752459&tmp...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Starting Virtual Machine will not start from hibernate mode.

Hi. I had a BSOD and upon rebooting my machine one of my virtual machines is stuck in "hibernate" mode and will not boot up.
I attempted to restore to previous versions of the vmc, but that did not work.
The error i receive is.
"Could not enable integration functions"
Retry or Continue.
Selecting "Continue" states "the operation failed. The virtual machine is not running"
Does anyone have any idea how to get a VPC up and running from this situation?
Thanks, Tim

Hi Dear Bob Comer,
My Laptop Windows 7 Suddenly "Shutdown". When I start it, it goes in recovery, after more than 5 hours I will Forcefully restart from Button, and start Windows 7.
Problem-1: Butt all environments OK butt very slow on any action, click on my computer or opening of any application very slow.
Problem 2: When I Click on Windows Virtual PC after long time I have same problem like "Could not enable integration
functions", Message displayed "Retry" or "Continue" after clicking "Continue" Message Displayed
"Could not enable integration functions".  I have Data in MS Virtual PC Drive "C" and "D".
I read your Solution: I'm trying following steps:-
1- Going to Setting of Windows Virtual PC and Unchecked "enable integration features at start up" and Close Status
"Shut down" from "hibernate"  Then
Press OK.
2- Remove the file (.vsv) from is
in "C:\Users\[userid]\AppData\Local\Microsoft\Windows Virtual PC".
3- Restart the Laptop and which is very slow, Butt When on Click to OPEN Windows Virtual PC Which is also very slow Black Screen coming with Windows XP Starting Logo. After long time Message Displayed "A disk read error occurred" Press Ctrl+Alt+Del to restart.
Start up Logo of Windows XP "Press Normally" again after 28sec in loop.
Dear What I can Do for: 1- retreating Data from Windows Virtual PC Drives "C" and "D" ????
2- How can my Virtual Machine Working OK and Fine ? Open
Please Solve my Problem with Thanks
Best Regards and Wishes
Khamkha

Oracle VM Manager 3.1.1: Killing a Virtual Machine

The iSCSI volume that was acting as the "physical" disk for the virtual machine "SLES-11-SP2" unexpectedly crashed and the virtual machine is stuck "in limbo".
I've tried stopping, restarting, and even killing the VM but Oracle Virtual Machine Manager 3.1.1 refuses:
SLES-11-SP2 is locked
Fri Oct 05 10:36:40 PDT 2012Ideas? Suggestions?
Eric Pretorious
Truckee, CA

FWIW: I used the CLI to kill the VM:
[root@ovm-1 0004fb0000030000b07711c67cc5cd5a]# xl list
Name                                        ID   Mem VCPUs     State     Time(s)
Domain-0                                     0   557     2     r-----   26923.5
0004fb000006000048c1a6931a1d3982            11 2048     1     -b----     274.9
[root@ovm-1 0004fb0000030000b07711c67cc5cd5a]# xl destroy 0004fb000006000048c1a6931a1d3982
[root@ovm-1 0004fb0000030000b07711c67cc5cd5a]# xl list
Name                                        ID   Mem VCPUs     State     Time(s)
Domain-0                                     0   557     2     r-----   26935.8
(null)                                      12     0     0     --p---       0.0
[root@ovm-1 0004fb0000030000b07711c67cc5cd5a]# xl list
Name                                        ID   Mem VCPUs     State     Time(s)
Domain-0                                     0   557     2     r-----   26942.2
0004fb000006000048c1a6931a1d3982            12 2048     1     --p---       0.0
[root@ovm-1 0004fb0000030000b07711c67cc5cd5a]# xl list
Name                                        ID   Mem VCPUs     State     Time(s)
Domain-0                                     0   557     2     r-----   26943.6
0004fb000006000048c1a6931a1d3982            12 2048     1     --p---       0.0...and I'm waiting for the host "OVM-1" to reboot but now I'm curious about the list of domains (above): Where did Dom12 come from? ( +HA was not enabled for the VM "SLES-11-SP2".+ )
Eric Pretorious
Truckee, CA

Office 2013 Installation stuck on Windows 8.1 ESXi virtual machine

When I try to install Office 2013 32 Bit - on a Windows 8.1 64 Bit Virtual Machine that is hosted on ESXi Host server .....it stucked installing it for hours and hours without finishing ....... I tried to install locally on a mounted ISO image with the same
result !!
It happens on many machines not a specific one !
Does any one know what can be a reason for that ?!
Hossam Wael Elmosallamy (IT Support Engineer-ECC Solutions) MCSE - CCNA [email protected] Mobile:(011)-49464671 www.eccsolutions.net "Experience Reliability&quot

Hi,
At which specific percentage will the setup hang? Vuk is right above, but it's really hard to say what's the cause of your case.
Please first take a look at this KB article and see if it is helpful for you:
Microsoft Office 2013 or Office 365 hangs during setup
I would suggest you go and check the setup log files to troubleshoot the issue, which is the best way to narrow down the issue I think.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Refresh Virtual Machine Job stuck in queue

Similar Messages

Maybe you are looking for