Refreshing grid display
Hi All,
My question is regarding report and grid display:
1) After executing report (with selection-screen), we will be directed to a screen (module pool) with multiplt ALV grids by making use of Splitter Control (which is dynamic depending on the output table).
Suppose only one output table is available then only on grid will be displayed, if two output tables are there then 2 grids will be displayed.
2) After executing this module pool screen, one more screen with errors would be displayed.
Now the output tables may vary in terms of no.of tables and in terms of data. Say like one more output table may be added to the previous screen.
But my second screen (mentioned in point 1) is not getting refreshed after coming back from error screen (mentioned in point 2).
Please provide some info on this. Hopefully my req is clear.
Regards
Satya Priya
when you are coming back , call the method: CALL METHOD gv_grid1->refresh_table_display. and CALL METHOD gv_grid2->refresh_table_display.
this might help.
Similar Messages
-
After refreshing ALV display, set it to the current cell that was modified.
Hello Experts,
I am currently using cl_gui_alv_grid for my ALV grid display. I have 1 editable column
which lets users input values. Now, When users press 'ENTER' in the keyboard I refresh
the ALV display to reflect the changes done. But the display always "moves back" to the first column
so it is tiresome to find the current cell that was modified. My question is, how do I set the ALV
display to just "stay put" in the current cell that was modified after pressing 'ENTER'?
Hope you can help me guys.Thank you and take care!Check this link
ALV scroll bar -
Update values in AlV grid display after entering value
Hi,
I have an issue in ALV grid display.
Let me explain.
i have 8 fields to display in which one is editiable.
Fields are: date
material,
material Description,
Opening Stock,
Closing stock- ( this field is editiable)
Closing stock,
Received Stock,
Actual production.
Actual production = Closing stock + removal stock
- receipt stock - opening stock.
when i change the value of closing stock and press enter, actual production should get update, the new values should display.
Thany you in advance.Hi,
Please refer the code below:
REPORT z_demo_alv_jg.*******************************************************************
* TYPE-POOLS *
TYPE-POOLS: slis. *******************************************************************
* INTERNAL TABLES/WORK AREAS/VARIABLES *
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
w_field TYPE slis_fieldcat_alv,
p_table LIKE dd02l-tabname,
dy_table TYPE REF TO data,
dy_tab TYPE REF TO data,
dy_line TYPE REF TO data.*******************************************************************
* FIELD-SYMBOLS *
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
<dyn_wa> TYPE ANY,
<dyn_field> TYPE ANY,
<dyn_tab_temp> TYPE STANDARD TABLE.*******************************************************************
* SELECTION SCREEN *
PARAMETERS: tabname(30) TYPE c,
lines(5) TYPE n.*******************************************************************
* START-OF-SELECTION *
START-OF-SELECTION.* Storing table name
p_table = tabname.* Create internal table dynamically with the stucture of table name
* entered in the selection screen
CREATE DATA dy_table TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_table->* TO <dyn_table>.
IF sy-subrc <> 0.
MESSAGE i000(z_zzz_ca_messages) WITH ' No table found'. LEAVE TO LIST-PROCESSING.
ENDIF.
* Create workarea for the table
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.* Create another temp. table
CREATE DATA dy_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_tab->* TO <dyn_tab_temp>. SORT i_fieldcat BY col_pos.* Select data from table
SELECT * FROM (p_table)
INTO TABLE <dyn_table>
UP TO lines ROWS. REFRESH <dyn_tab_temp>.* Display report
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'SET_PF_STATUS'
TABLES
t_outtab = <dyn_table>
EXCEPTIONS
program_error = 1
OTHERS = 2. IF sy-subrc <> 0. ENDIF.*&-----------------------------------------------------------------*
*& Form SET_PF_STATUS
* Setting custom PF-Status
* -->RT_EXTAB Excluding table
FORM set_pf_status USING rt_extab TYPE slis_t_extab. SET PF-STATUS 'Z_STANDARD'.ENDFORM. "SET_PF_STATUS*&----------------------------------------------------------------*
*& Form user_command
* Handling custom function codes
* -->R_UCOMM Function code value
* -->RS_SELFIELD Info. of cursor position in ALV
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.* Local data declaration
DATA: li_tab TYPE REF TO data,
l_line TYPE REF TO data.* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
<l_wa> TYPE ANY.* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>. CASE r_ucomm.* When a record is selected
WHEN '&IC1'.* Read the selected record
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
rs_selfield-tabindex. IF sy-subrc = 0.* Store the record in an internal table
APPEND <dyn_wa> TO <l_tab>.* Fetch the field catalog info
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'Z_DEMO_PDF_JG'
i_structure_name = p_table
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.* Make all the fields input enabled except key fields
w_field-input = 'X'. MODIFY i_fieldcat FROM w_field TRANSPORTING input
WHERE key IS INITIAL. ENDIF.* Display the record for editing purpose
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
it_fieldcat = i_fieldcat
i_screen_start_column = 10
i_screen_start_line = 15
i_screen_end_column = 200
i_screen_end_line = 20
TABLES
t_outtab = <l_tab>
EXCEPTIONS
program_error = 1
OTHERS = 2. IF sy-subrc = 0.* Read the modified data
READ TABLE <l_tab> INDEX 1 INTO <l_wa>.* If the record is changed then track its index no.
* and populate it in an internal table for future
* action
IF sy-subrc = 0 AND <dyn_wa> <> <l_wa>.
<dyn_wa> = <l_wa>.
i_index = rs_selfield-tabindex.
APPEND i_index.
ENDIF.
ENDIF. ENDIF.* When save button is pressed
WHEN 'SAVE'.* Sort the index table
SORT i_index.* Delete all duplicate records
DELETE ADJACENT DUPLICATES FROM i_index. LOOP AT i_index.* Find out the changes in the internal table
* and populate these changes in another internal table
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX i_index.
IF sy-subrc = 0.
APPEND <dyn_wa> TO <dyn_tab_temp>.
ENDIF. ENDLOOP.* Lock the table
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3. IF sy-subrc = 0.* Modify the database table with these changes
MODIFY (p_table) FROM TABLE <dyn_tab_temp>. REFRESH <dyn_tab_temp>.* Unlock the table
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table. ENDIF.
ENDCASE. rs_selfield-refresh = 'X'.ENDFORM. "user_command
Thanks,
Sriram Ponna. -
How to capture the checkbox status in ALV Grid display
I need some immediate help regarding Grid ALV.
My Requirement: I need to display an ALV grid report along with checkboxes. Further, I need to provide an option wherein the user can checkboxes and select the records that I need to process further (by clicking the process button on the ALV Report).
My Query: The problem here is that I am not able to capture the status of the checkboxes. This means that I am not able to capture which of the records have been selected by checking their resp checkboxes.
Solutions that I have tried: I have tried capturing the same at user command by checking the value in slis_selfield. But all the records show the value as 1 for the checkbox field.
Kinldy suggest how to go about it.
I am not using Object Oriented ALV. Please suggest something to be used in ALV Grid display in 4.6C version.
Regards,
NamrataHere is a Sample code , it might help you
TABLES : sflight.
TYPE-POOLS: slis.
DATA : w_repid LIKE sy-repid.
w_repid = sy-repid.
DATA: BEGIN OF it_sflight OCCURS 0,
checkbox(1),
carrid LIKE sflight-carrid,
END OF it_sflight.
*layout
DATA: wa_layout TYPE slis_layout_alv.
*field catalog
DATA: it_fieldcatalog TYPE slis_t_fieldcat_alv,
wa_fieldcatalog TYPE slis_fieldcat_alv.
START-OF-SELECTION.
SELECT carrid FROM sflight
INTO CORRESPONDING FIELDS OF TABLE it_sflight.
END-OF-SELECTION.
CLEAR it_fieldcatalog.
REFRESH it_fieldcatalog.
wa_fieldcatalog-fieldname = 'CHECKBOX'.
wa_fieldcatalog-outputlen = '3'.
wa_fieldcatalog-col_pos = '1'.
wa_fieldcatalog-seltext_m = 'Chk'.
wa_fieldcatalog-checkbox = 'X'.
wa_fieldcatalog-edit = 'X'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
wa_fieldcatalog-fieldname = 'CARRID'.
wa_fieldcatalog-outputlen = '10'.
wa_fieldcatalog-col_pos = '2'.
wa_fieldcatalog-seltext_m = 'Carrid'.
APPEND wa_fieldcatalog TO it_fieldcatalog.
CLEAR wa_fieldcatalog.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = w_repid
is_layout = wa_layout
i_callback_user_command = 'USER_COMMAND'
it_fieldcat = it_fieldcatalog
TABLES
t_outtab = it_sflight
EXCEPTIONS
program_error = 1
OTHERS = 2.
*& Form USER_COMMAND
FORM user_command USING p_ucomm TYPE sy-ucomm
p_selfld TYPE slis_selfield.
CASE p_ucomm.
WHEN '&DATA_SAVE'.
DATA ref1 TYPE REF TO cl_gui_alv_grid.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = ref1.
CALL METHOD ref1->check_changed_data.
LOOP AT it_sflight WHERE checkbox = 'X'.
DELETE it_sflight INDEX sy-tabix.
ENDLOOP.
p_selfld-refresh = 'X'.
ENDCASE.
ENDFORM. "user_command -
Color a specific row in ALV GRID display when user clicks on that row
hi
i have the entire code ready of how to check the line selected by the user and also to color that line but after settings those parameters
for to refresh the GRID so that the row apppears coloured .plz reply soon.... points will be awarded.....
wat i have done is
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = i_repid
i_callback_user_command = 'USER_COMMAND'
is_layout = it_layout
it_fieldcat = int_fieldcat
TABLES
t_outtab = int
EXCEPTIONS
program_error = 1
OTHERS = 2.
to display the GRID then when user clicks on any row this module gets called
FORM user_command USING r_ucomm TYPE sy-ucomm
rs_selfield TYPE slis_selfield.
READ TABLE int INDEX rs_selfield-tabindex.
int-rowcolor = 'C410'.
MODIFY int INDEX rs_selfield-tabindex TRANSPORTING rowcolor.
it_layout-info_fieldname = 'ROWCOLOR'.
then again i call 'REUSE_ALV_GRID_DISPLAY'
to display the GRID with the user selected line colored . the problem with this is when u go back from this screen u go to the previously displayed grid ....... whihc i dont want .....
ENDFORM. "user_commandHi,
By using following code,you can set the colors for each row,
Change this based on your requirement.
TABLES VBAK.
TYPE-POOLS SLIS.
Data Declaration
TYPES: BEGIN OF T_VBAK,
VBELN TYPE VBAK-VBELN,
ERDAT TYPE VBAK-ERDAT,
ERNAM TYPE VBAK-ERNAM,
AUDAT TYPE VBAK-AUDAT,
VBTYP TYPE VBAK-VBTYP,
NETWR TYPE VBAK-NETWR,
VKORG TYPE VBAK-VKORG,
VKGRP TYPE VBAK-VKGRP,
LINE_COLOR(4) TYPE C,
END OF T_VBAK.
DATA: IT_VBAK TYPE STANDARD TABLE OF T_VBAK INITIAL SIZE 0,
WA_VBAK TYPE T_VBAK.
ALV Data Declaration
DATA: FLDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
GD_LAYOUT TYPE SLIS_LAYOUT_ALV,
GD_REPID TYPE SY-REPID.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BLD_FLDCAT.
PERFORM BLD_LAYOUT.
PERFORM DISPLAY_ALV_REPORT.
Build Field Catalog for ALV Report
FORM BLD_FLDCAT.
FLDCAT-FIELDNAME = 'VBELN'.
FLDCAT-SELTEXT_M = 'Sales Document'.
FLDCAT-COL_POS = 0.
*FLDCAT-EMPHASIZE = 'C411'.
FLDCAT-OUTPUTLEN = 20.
FLDCAT-KEY = 'X'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'ERDAT'.
FLDCAT-SELTEXT_L = 'Record Date created'.
FLDCAT-COL_POS = 1.
FLDCAT-KEY = 'X'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'ERNAM'.
FLDCAT-SELTEXT_L = 'Cteated Object Person Name'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'AUDAT'.
FLDCAT-SELTEXT_M = 'Document Date'.
FLDCAT-COL_POS = 3.
FLDCAT-EMPHASIZE = 'C110'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'VBTYP'.
FLDCAT-SELTEXT_L = 'SD Document category'.
FLDCAT-COL_POS = 4.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'NETWR'.
FLDCAT-SELTEXT_L = 'Net Value of the SO in Document Currency'.
FLDCAT-COL_POS = 5.
FLDCAT-OUTPUTLEN = 60.
FLDCAT-DO_SUM = 'X'.
FLDCAT-DATATYPE = 'CURR'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'VKORG'.
FLDCAT-SELTEXT_L = 'Sales Organization'.
FLDCAT-COL_POS = 6.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'VKGRP'.
FLDCAT-SELTEXT_M = 'Sales Group'.
FLDCAT-COL_POS = 7.
FLDCAT-EMPHASIZE = 'C801'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
ENDFORM.
Build Layout for ALV Grid Report
FORM BLD_LAYOUT.
GD_LAYOUT-NO_INPUT = 'X'.
GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
GD_LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
GD_LAYOUT-WINDOW_TITLEBAR = 'GRID DISPLAY'.
GD_LAYOUT-CONFIRMATION_PROMPT = 'X'. This asks the confirmation before leaving the screen.
ENDFORM.
Display report using ALV grid
FORM DISPLAY_ALV_REPORT.
GD_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = GD_REPID
IS_LAYOUT = GD_LAYOUT
I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
I_GRID_TITLE = 'SALES DOCUMENT HEADER'
IT_FIELDCAT = FLDCAT[]
I_SAVE = 'X'
TABLES
T_OUTTAB = IT_VBAK
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Retrieve data from VBAK table and populate itab IT_VBAK
FORM DATA_RETRIEVAL.
DATA LD_COLOR(1) TYPE C.
SELECT VBELN ERDAT ERNAM AUDAT VBTYP NETWR VKORG
UP TO 20 ROWS
FROM VBAK
INTO TABLE IT_VBAK.
LOOP AT IT_VBAK INTO WA_VBAK.
LD_COLOR = LD_COLOR + 1.
IF LD_COLOR = 8.
LD_COLOR = 1.
ENDIF.
CONCATENATE 'C' LD_COLOR '10' INTO WA_VBAK-LINE_COLOR.
MODIFY IT_VBAK FROM WA_VBAK.
ENDLOOP.
ENDFORM.
FORM TOP_OF_PAGE.
DATA: T_HEADER TYPE SLIS_T_LISTHEADER,
W_HEADER TYPE SLIS_LISTHEADER.
W_HEADER-TYP = 'H'.
W_HEADER-INFO = 'WELCOME HEADER LIST'.
APPEND W_HEADER TO T_HEADER.
W_HEADER-TYP = 'S'.
W_HEADER-KEY = 'REPORT:'.
W_HEADER-INFO = SY-REPID.
APPEND W_HEADER TO T_HEADER.
W_HEADER-TYP = 'S'.
W_HEADER-KEY = 'DATE:'.
CONCATENATE SY-DATUM6(2) ' / ' SY-DATUM4(2) ' / ' SY-DATUM(4) INTO W_HEADER-INFO.
APPEND W_HEADER TO T_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = T_HEADER
ENDFORM.
Reward points,if it is useful.
Thanks,
chandu. -
Error while running the Grid display
Hi Experts,
I got one problem. I created an Z-report, the output type is as Grid display. After viewing the output and pressing back button, it is going to dump.
Thanks in Advance,
SrinivasHi Sriniva,
Can you post your code?
And I think that you handle your "User_Command" after calling FM REUSE_ALV_GRID_DISPLAY.
Like that:
DATA: user_command TYPE slis_formname VALUE 'USER_COMMAND'.
er_layout-zebra = 'X'.
er_layout-colwidth_optimize = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_pf_status_set = 'PF_STATUS_SET'
i_callback_user_command = user_command
i_buffer_active = space
i_bypassing_buffer = 'X'
is_layout = er_layout
it_fieldcat = er_fieldcat[]
it_special_groups = er_sp_group
i_save = 'A'
is_variant = e_variant
it_events = er_events[]
TABLES
t_outtab = outtab.
* FORM user_command
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
DATA : l_grid TYPE REF TO cl_gui_alv_grid.
DATA : l_ucomm LIKE sy-ucomm.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = l_grid.
l_ucomm = '&REFRESH'.
CALL METHOD l_grid->set_function_code
CHANGING
c_ucomm = l_ucomm.
CASE r_ucomm.
WHEN '&DATA_SAVE' .
ENDCASE.
rs_selfield-refresh = 'X'.
ENDFORM. " USER_COMMAND -
Check box as output of ALV grid display
Hello Experts,
I have an internal table consiting of 3 fields which i need to display this using the grid display.
The requirement is to place a check box before the 1 and the 3rd line item.
Thanks in advance.Hi
data: it_check TYPE STANDARD TABLE OF st_check,
wa_check TYPE st_check.
to get the pop up data:
LOOP AT it_ekko INTO wa_ekko WHERE check = 'X'.
READ TABLE it_eine INTO wa_eine WITH KEY ebeln = wa_ekko-ebeln.
IF sy-subrc NE 0.
MESSAGE i020(z50871msg) WITH text-015 wa_ekko-ebeln .
ELSE.
wa_popup-ebeln = wa_eine-ebeln.
wa_popup-ekorg = wa_eine-ekorg.
wa_popup-ekgrp = wa_eine-ekgrp.
APPEND wa_popup TO it_popup.
ENDIF.
ENDLOOP.
to dispay pop up;
FORM display_popup .
LOOP AT it_ekko INTO wa_ekko WHERE check EQ 'X'.
wa_check-check = wa_ekko-check.
APPEND wa_check TO it_check.
ENDLOOP.
IF it_check[] IS INITIAL.
MESSAGE i020(z50871msg) WITH text-018.
ENDIF.
IF NOT it_popup[] IS INITIAL.
CALL FUNCTION 'REUSE_ALV_POPUP_TO_SELECT'
EXPORTING
i_title = text-003
i_allow_no_selection = 'X'
i_scroll_to_sel_line = 'X'
i_tabname = 'IT_POPUP'
it_fieldcat = it_fieldcat
i_callback_program = sy-repid
TABLES
t_outtab = it_popup
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDIF.
REFRESH it_check.
REFRESH it_popup.
ENDFORM. " DISPLAY_POPUP -
Problem with ALV Grid Display screen Back Button
Dear Friends ,
I have an ALV Grid Display,Here am facing a problem for my 'Back' button,i haven't defined any PF Status and is using the standard one.But after the Display when i press Back Button a blank Screen is appearing n then again i have to press back button to go to my Selection Screen.
Please Suggest if i have to take care of something else.
I want my Selection Screen when i press Back on my Display Screen.
DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT TYPE SLIS_FIELDCAT_ALV.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
I_INTERFACE_CHECK = ' '
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT =
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
Thanks and Regards,
AshwiniHi Vijay ,
No i dont have any write statement in my proggram.
Here it is
REPORT ZRMMPD01A NO STANDARD PAGE HEADING.
TABLES : EQUI,SER03,MKPF,OBJK.
TYPE-POOLS : SLIS.
DATA IT_EQUI LIKE EQUI OCCURS 0 WITH HEADER LINE.
DATA IT_OBJK LIKE OBJK OCCURS 0 WITH HEADER LINE..
DATA IT_SER03 LIKE SER03 OCCURS 0 WITH HEADER LINE.
DATA IT_MKPF LIKE MKPF OCCURS 0 WITH HEADER LINE .
DATA : BEGIN OF IT_DISPLAY OCCURS 0,
MATNR LIKE EQUI-MATNR,
SERNR LIKE EQUI-SERNR,
BWART LIKE SER03-BWART,
WERK LIKE SER03-WERK,
CHARGE LIKE SER03-CHARGE,
LAGERORT LIKE SER03-LAGERORT,
MBLNR LIKE SER03-MBLNR,
MJAHR LIKE SER03-MJAHR,
ZEILE LIKE SER03-ZEILE,
BUDAT LIKE MKPF-BUDAT,
BKTXT LIKE MKPF-BKTXT,
USNAM LIKE MKPF-USNAM,
XBLNR LIKE MKPF-XBLNR,
END OF IT_DISPLAY.
DATA : WA_DISPLAY LIKE IT_DISPLAY.
DATA IT_FINAL LIKE IT_DISPLAY OCCURS 0 WITH HEADER LINE.
DATA IT_TEMP LIKE IT_DISPLAY OCCURS 0 WITH HEADER LINE.
DATA: IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
FIELDCAT TYPE SLIS_FIELDCAT_ALV.
DATA :I_LAYOUT TYPE SLIS_LAYOUT_ALV,
I_EVENTS TYPE SLIS_T_EVENT.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS : S_MATNR FOR EQUI-MATNR MATCHCODE OBJECT MCD,"OBLIGATORY
S_SERNR FOR EQUI-SERNR, "MATCHCODE OBJECT MCD OBLIGATORY
S_MBLNR FOR SER03-MBLNR MATCHCODE OBJECT MCD,
S_BWART FOR SER03-BWART MATCHCODE OBJECT MCD,
S_WERK FOR SER03-WERK MATCHCODE OBJECT MCD,
S_LAGET FOR SER03-LAGERORT MATCHCODE OBJECT MCD,
S_BUDAT FOR MKPF-BUDAT MATCHCODE OBJECT MCD,
S_XBLNR FOR MKPF-XBLNR MATCHCODE OBJECT MCD.
SELECTION-SCREEN END OF BLOCK B1.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-002.
PARAMETERS : R1 RADIOBUTTON GROUP G1 DEFAULT 'X',
R2 RADIOBUTTON GROUP G1.
SELECTION-SCREEN END OF BLOCK B2.
START-OF-SELECTION.
*Fetch Data.
PERFORM GET_DATA.
*Fill Display Fields.
PERFORM FILL_TABLE.
*Segregate data according to radio button selection.
PERFORM SELECT_CONDITION.
*Fill The Feild catalog.
PERFORM FIELD_CATALOG.
*Display Output.
PERFORM OUTPUT_DISPLAY..
*& Form GET_DATA
text
--> p1 text
<-- p2 text
FORM GET_DATA.
SELECT * FROM EQUI INTO TABLE IT_EQUI
WHERE MATNR IN S_MATNR
AND SERNR IN S_SERNR.
SELECT * FROM OBJK INTO TABLE IT_OBJK
FOR ALL ENTRIES IN IT_EQUI
WHERE EQUNR = IT_EQUI-EQUNR.
SELECT * FROM SER03 INTO TABLE IT_SER03
FOR ALL ENTRIES IN IT_OBJK
WHERE OBKNR = IT_OBJK-OBKNR
AND MBLNR IN S_MBLNR
AND BWART IN S_BWART
AND WERK IN S_WERK
AND LAGERORT IN S_LAGET.
SELECT * FROM MKPF INTO TABLE IT_MKPF
FOR ALL ENTRIES IN IT_SER03
WHERE MBLNR = IT_SER03-MBLNR
AND BUDAT IN S_BUDAT
AND XBLNR IN S_XBLNR.
ENDFORM. " GET_DATA
*& Form FILL_TABLE
text
--> p1 text
<-- p2 text
FORM FILL_TABLE.
LOOP AT IT_EQUI.
LOOP AT IT_OBJK.
IF IT_OBJK-EQUNR <> IT_EQUI-EQUNR.
SKIP.
ELSE.
READ TABLE IT_SER03 WITH KEY OBKNR = IT_OBJK-OBKNR.
IF SY-SUBRC = 0.
WA_DISPLAY-MATNR = IT_EQUI-MATNR.
WA_DISPLAY-SERNR = IT_EQUI-SERNR.
WA_DISPLAY-BWART = IT_SER03-BWART.
WA_DISPLAY-WERK = IT_SER03-WERK.
WA_DISPLAY-CHARGE = IT_SER03-CHARGE.
WA_DISPLAY-LAGERORT = IT_SER03-LAGERORT.
WA_DISPLAY-MBLNR = IT_SER03-MBLNR.
WA_DISPLAY-MJAHR = IT_SER03-MJAHR.
WA_DISPLAY-ZEILE = IT_SER03-ZEILE.
READ TABLE IT_MKPF WITH KEY MBLNR = IT_SER03-MBLNR.
IF SY-SUBRC = 0.
WA_DISPLAY-BUDAT = IT_MKPF-BUDAT.
WA_DISPLAY-BKTXT = IT_MKPF-BKTXT.
WA_DISPLAY-USNAM = IT_MKPF-USNAM.
WA_DISPLAY-XBLNR = IT_MKPF-XBLNR.
ENDIF.
ENDIF.
ENDIF.
IF NOT WA_DISPLAY IS INITIAL.
APPEND WA_DISPLAY TO IT_DISPLAY.
CLEAR WA_DISPLAY.
ENDIF.
ENDLOOP.
ENDLOOP.
ENDFORM. " FILL_TABLE
*& Form FIELD_CATALOG
text
--> p1 text
<-- p2 text
FORM FIELD_CATALOG.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MATNR'.
FIELDCAT-SELTEXT_M = 'Material Number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'SERNR'.
FIELDCAT-SELTEXT_M = 'Serial number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MBLNR'.
FIELDCAT-SELTEXT_L = 'Number of material document'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BWART'.
FIELDCAT-SELTEXT_M = 'Movement type'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'WERK'.
FIELDCAT-SELTEXT_M = 'Plant'.
FIELDCAT-OUTPUTLEN = 5.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'CHARGE'.
FIELDCAT-SELTEXT_M = 'Batch number'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'LAGERORT'.
FIELDCAT-SELTEXT_M = 'Storage Location'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'MJAHR'.
FIELDCAT-SELTEXT_M = 'Material doc. year'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'ZEILE'.
FIELDCAT-SELTEXT_L = 'Item in material document'.
FIELDCAT-OUTPUTLEN = 18.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BUDAT'.
FIELDCAT-SELTEXT_L = 'Posting date in the document'.
FIELDCAT-OUTPUTLEN = 10.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'BKTXT'.
FIELDCAT-SELTEXT_L = 'Document header text'.
FIELDCAT-OUTPUTLEN = 25.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'USNAM'.
FIELDCAT-SELTEXT_M = 'User name'.
FIELDCAT-OUTPUTLEN = 15.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
FIELDCAT-TABNAME = 'IT_DISPLAY'.
FIELDCAT-FIELDNAME = 'XBLNR'.
FIELDCAT-SELTEXT_L = 'Reference document number'.
FIELDCAT-OUTPUTLEN = 25.
APPEND FIELDCAT TO IT_FIELDCAT.
CLEAR FIELDCAT.
ENDFORM. " FIELD_CATALOG
*& Form DISPLAY_OUTPUT
text
--> p1 text
<-- p2 text
FORM OUTPUT_DISPLAY.
IF R1 = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = IT_DISPLAY
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH IT_DISPLAY.
CLEAR IT_DISPLAY.
ELSEIF R2 = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = 'ZRMMPD01A'
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = IT_FIELDCAT
TABLES
T_OUTTAB = IT_FINAL
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH IT_DISPLAY.
CLEAR IT_DISPLAY.
ENDIF.
ENDFORM. " DISPLAY_OUTPUT
*& Form SELECT_CONDITION
text
--> p1 text
<-- p2 text
FORM SELECT_CONDITION.
IF R2 = 'X'.
CLEAR WA_DISPLAY.
SORT IT_DISPLAY BY MATNR SERNR MBLNR ZEILE.
DELETE ADJACENT DUPLICATES FROM IT_DISPLAY.
LOOP AT IT_DISPLAY WHERE ZEILE = '0002'.
READ TABLE IT_DISPLAY WITH KEY MATNR = IT_DISPLAY-MATNR
SERNR = IT_DISPLAY-SERNR ZEILE = '0001'.
IF SY-SUBRC = 0.
DELETE IT_DISPLAY.
ENDIF.
ENDLOOP.
SORT IT_DISPLAY BY MATNR SERNR BWART MBLNR.
DELETE ADJACENT DUPLICATES FROM IT_DISPLAY.
LOOP AT IT_DISPLAY.
IF WA_DISPLAY IS INITIAL.
WA_DISPLAY = IT_DISPLAY.
ENDIF.
LOOP AT IT_DISPLAY WHERE MATNR = WA_DISPLAY-MATNR
AND SERNR = WA_DISPLAY-SERNR.
IF IT_DISPLAY-BUDAT > WA_DISPLAY-BUDAT.
WA_DISPLAY = IT_DISPLAY.
ELSE.
DELETE IT_DISPLAY.
ENDIF.
ENDLOOP.
APPEND WA_DISPLAY TO IT_TEMP.
CLEAR WA_DISPLAY.
ENDLOOP.
DELETE ADJACENT DUPLICATES FROM IT_TEMP.
IF NOT IT_TEMP[] IS INITIAL.
IT_FINAL[] = IT_TEMP[].
ENDIF.
ENDIF.
ENDFORM. " SELECT_CONDITION
Regards,
Ashwini -
Not able to download all the rows to excel sheet from alv grid display
Hi experts,
I am not able to download all the rows which are displayed in alv grid display for some material numbers.
for some materials i am able to download, i used two ways to download 1) from icon(local file) on grid 2) menu list->export.
i checked in debugging till selecting the spread sheet pop up window, i am able to see all the data in internal table.
Can you suggest me what will be the problem....
thanks in advance,hi sandeep,
sorry for didnt specify clearly.
note: EX: "asaasdada in this sentence i said " this symbol is special character not the text.
building final internal table code
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
EXPORTING
capid = p_capid
datuv = sy-datum
ehndl = '1'
mktls = 'X'
mehrs = 'X'
mmory = '1'
mtnrv = p_matnr
stlal = '1'
stpst = 0
svwvo = 'X'
werks = p_werks
vrsvo = 'X'
TABLES
stb = i_stb
EXCEPTIONS
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_stb1[] = i_stb[].
IF NOT i_stb1[] IS INITIAL.
SORT i_stb1 BY idnrk.
DELETE ADJACENT DUPLICATES FROM i_stb1 COMPARING idnrk.
SELECT bmatn ematn FROM ampl INTO TABLE i_ampl
FOR ALL ENTRIES IN i_stb1
WHERE bmatn = i_stb1-idnrk AND
datuv LE sy-datum AND
datub GE sy-datum.
SELECT
matnr
bwkey
verpr
stprs
bwprh
FROM mbew
INTO TABLE i_mbew
FOR ALL ENTRIES IN i_stb1
WHERE
matnr EQ i_stb1-idnrk AND
bwkey EQ i_stb1-werks.
IF NOT i_stb1[] IS INITIAL.
SELECT matnr werks beskz
dzeit webaz plifz
ekgrp
INTO TABLE i_marc
FROM marc
FOR ALL ENTRIES IN i_stb1
WHERE matnr = i_stb1-idnrk
AND werks = i_stb1-werks.
SORT i_marc BY matnr werks.
ENDIF.
CLEAR i_ekpo.
CLEAR i_vend.
IF NOT i_stb1[] IS INITIAL.
SELECT ebeln ebelp matnr werks loekz aedat
netpr peinh
INTO TABLE i_ekpo
FROM ekpo
FOR ALL ENTRIES IN i_stb1
WHERE matnr = i_stb1-idnrk
AND werks = i_stb1-werks.
SORT i_ekpo BY matnr ASCENDING
aedat DESCENDING
ebeln DESCENDING
ebelp DESCENDING.
IF NOT i_ekpo IS INITIAL.
SELECT k~ebeln k~lifnr l~name1
INTO TABLE i_vend
FROM ekko AS k INNER JOIN lfa1 AS l
ON k~lifnr EQ l~lifnr
FOR ALL ENTRIES IN i_ekpo
WHERE ebeln = i_ekpo-ebeln.
SORT i_vend BY ebeln.
ENDIF.
ENDIF.
ENDIF.
i_ampl1[] = i_ampl[].
IF NOT i_ampl1[] IS INITIAL.
SORT i_ampl1 BY ematn.
DELETE ADJACENT DUPLICATES FROM i_ampl1 COMPARING ematn.
SELECT matnr mfrpn mfrnr FROM mara INTO TABLE i_mara
FOR ALL ENTRIES IN i_ampl1
WHERE matnr = i_ampl1-ematn.
ENDIF.
SORT i_ampl BY bmatn.
IF NOT i_stb[] IS INITIAL.
SELECT stlty stlnr stlkn stpoz idnrk potx1 potx2
INTO TABLE i_stpo
FROM stpo
FOR ALL ENTRIES IN i_stb
WHERE stlty = i_stb-stlty
AND stlnr = i_stb-stlnr
AND stlkn = i_stb-stlkn
AND stpoz = i_stb-stpoz
AND idnrk = i_stb-idnrk.
SORT i_stpo BY stlty stlnr stlkn stpoz idnrk.
ENDIF.
LOOP AT i_stb INTO wa_stb.
READ TABLE i_marc INTO wa_marc
WITH KEY matnr = wa_stb-idnrk
werks = wa_stb-werks
BINARY SEARCH.
IF sy-subrc = 0.
wa_outtab-beskz = wa_marc-beskz.
wa_outtab-dzeit = wa_marc-dzeit.
wa_outtab-webaz = wa_marc-webaz.
wa_outtab-plifz = wa_marc-plifz.
wa_outtab-ekgrp = wa_marc-ekgrp.
ENDIF.
READ TABLE i_ekpo INTO wa_ekpo
WITH KEY matnr = wa_stb-idnrk.
IF sy-subrc = 0.
wa_outtab-netpr = wa_ekpo-netpr.
wa_outtab-peinh = wa_ekpo-peinh.
READ TABLE i_vend INTO wa_vend
WITH KEY ebeln = wa_ekpo-ebeln
BINARY SEARCH.
IF sy-subrc = 0.
wa_outtab-lifnr = wa_vend-lifnr.
wa_outtab-name_sup = wa_vend-name1.
ENDIF.
ENDIF.
READ TABLE i_stpo INTO wa_stpo
WITH KEY stlty = wa_stb-stlty
stlnr = wa_stb-stlnr
stlkn = wa_stb-stlkn
stpoz = wa_stb-stpoz
idnrk = wa_stb-idnrk
BINARY SEARCH.
IF sy-subrc = 0.
wa_outtab-potx1 = wa_stpo-potx1.
wa_outtab-potx2 = wa_stpo-potx2.
ENDIF.
READ TABLE i_mbew INTO wa_mbew
WITH KEY
matnr = wa_stb-idnrk
bwkey = wa_stb-werks.
IF sy-subrc IS INITIAL.
MOVE:
wa_mbew-verpr TO wa_outtab-verpr,
wa_mbew-stprs TO wa_outtab-stprs,
wa_mbew-bwprh TO wa_outtab-bwprh.
ENDIF.
wa_outtab-matnr = p_matnr.
wa_outtab-posnr = wa_stb-posnr.
wa_outtab-stufe = wa_stb-stufe.
wa_outtab-idnrk = wa_stb-idnrk.
wa_outtab-ojtxb = wa_stb-ojtxp.
wa_outtab-menge = wa_stb-menge.
wa_outtab-meins = wa_stb-meins.
MOVE: wa_stb-zzitem_draw_no TO wa_outtab-zzitem_draw_no.
IF wa_stb-upskz = 'X'.
SELECT * FROM stpu INTO TABLE i_stpu
WHERE stlty = wa_stb-stlty AND
stlnr = wa_stb-stlnr AND
stlkn = wa_stb-stlkn AND
stpoz = wa_stb-stpoz.
ENDIF.
LOOP AT i_stpu INTO wa_stpu.
wa_outtab-upmng = wa_stpu-upmng.
wa_outtab-ebort = wa_stpu-ebort.
wa_outtab-uposz = wa_stpu-uposz.
CONCATENATE v_ebort wa_stpu-ebort INTO v_ebort
SEPARATED BY space.
ENDLOOP.
MOVE strlen( v_ebort ) TO v_len.
MOVE: 0 TO x,
128 TO y.
DATA : lt_tab TYPE TABLE OF swastrtab.
DATA : ls_tab LIKE LINE OF lt_tab.
DATA : lv_ebort TYPE string.
CLEAR lv_ebort. CLEAR lt_tab.
MOVE v_ebort TO lv_ebort.
CALL FUNCTION 'SWA_STRING_SPLIT'
EXPORTING
input_string = lv_ebort
max_component_length = 128
TABLES
string_components = lt_tab
EXCEPTIONS
max_component_length_invalid = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
IF lt_tab[] IS NOT INITIAL.
LOOP AT lt_tab INTO ls_tab.
CLEAR lv_ebort.
MOVE: ls_tab-str TO lv_ebort.
CONDENSE lv_ebort.
MOVE lv_ebort TO wa_outtab-ebort.
APPEND wa_outtab TO i_outtab.
CLEAR:
wa_outtab-matnr,
wa_outtab-posnr,
wa_outtab-zzitem_draw_no,
wa_outtab-ojtxb,
wa_outtab-menge,
wa_outtab-meins,
wa_outtab-uposz,
wa_outtab-upmng,
wa_outtab-verpr,
wa_outtab-stprs,
wa_outtab-bwprh,
wa_outtab-lifnr,
wa_outtab-name_sup,
wa_outtab-potx1,
wa_outtab-potx2,
wa_outtab-netpr,
wa_outtab-peinh.
* wa_outtab-idnrk.
ENDLOOP.
ELSE.
APPEND wa_outtab TO i_outtab.
ENDIF.
CLEAR v_ebort.
CLEAR: wa_stpu.
REFRESH: i_stpu.
LOOP AT i_ampl INTO wa_ampl WHERE bmatn = wa_stb-idnrk.
READ TABLE i_mara INTO wa_mara WITH TABLE KEY matnr = wa_ampl-ematn.
IF sy-subrc = 0.
LOOP AT i_outtab INTO wa_outtab
WHERE
idnrk = wa_stb-idnrk AND
flag NE 'X'.
wa_outtab-mfrpn = wa_mara-mfrpn.
wa_outtab-mfrnr = wa_mara-mfrnr.
SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
MOVE 'X' TO wa_outtab-flag.
MODIFY i_outtab FROM wa_outtab
TRANSPORTING mfrpn mfrnr name1 flag.
EXIT.
ENDLOOP.
IF sy-subrc <> 0.
CLEAR:
wa_outtab-matnr,
wa_outtab-posnr,
wa_outtab-zzitem_draw_no,
wa_outtab-ojtxb,
wa_outtab-ebort,
* wa_outtab-idnrk,
wa_outtab-menge,
wa_outtab-meins,
wa_outtab-uposz,
wa_outtab-upmng,
wa_outtab-verpr,
wa_outtab-stprs,
wa_outtab-bwprh,
wa_outtab-lifnr,
wa_outtab-name_sup,
wa_outtab-potx1,
wa_outtab-potx2,
wa_outtab-netpr,
wa_outtab-peinh.
wa_outtab-mfrpn = wa_mara-mfrpn.
wa_outtab-mfrnr = wa_mara-mfrnr.
SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
APPEND wa_outtab TO i_outtab.
ENDIF.
ENDIF.
REFRESH i_stpu.
CLEAR i_stpu.
ENDLOOP. CLEAR: wa_matnr1, wa_mfrnr, wa_outtab.
ENDLOOP.
Edited by: srinivasareddy j on Mar 9, 2011 7:16 AM
Edited by: srinivasareddy j on Mar 9, 2011 7:20 AM -
HI Experts,
I have a requirement of displaying top of page and corresponding detailed records for specific combination of top of page(say plant,material,batch etc). Again for the next combination I need repeated header and detail list.
I guess I have to use NEW PAGE to get this.
However, I am using the REUSE ALV GRID DISPLAY for which the sort table does not display as required.
Could you please help me on this?
In addition could you please suggest how to use NEW page in report without using OOPS concept.
Please reply.
Thanks,
Suchi.Hi,
1.Put a pushbutton on the ALV o/p say 'Next'.
2. Now in the user comand routine you have to change the table contents u supply to reuse_alv_commentary write, also fill the o/p internal table with data corresponding to ur specific combination and supply to reuse_alv_grid_display.
3.In the user comand routine u have slis_selfield.
4.It contains a component refresh, mark it as 'X'.( slis_selfield-refresh = 'X'.)
5.No need of new page or calling reus_alv_grid_display number of times.
Regards,
Phani. -
To change the colour of the particular cell of ALV report in Grid display.
Hai Friends,
I have created an Alv report in grid display .In that i want to change the colour of the particular cell.Plz provide the answer with a solved example.
Thank u.This works for a Custom Control and OO ALV in a Dialog Module
TABLES: kna1.
* Data (for the ALV Grid)
TYPES:
BEGIN OF t_alv_data,
cust_id TYPE kunnr, "Customer Number
cust_name TYPE name1_gp, "Customer Name
cust_color TYPE i,
* cell coloring field
color TYPE lvc_t_scol, "Cell coloring
END OF t_alv_data.
DATA:
v_alv_data TYPE t_alv_data,
i_alv_data TYPE STANDARD TABLE OF t_alv_data.
* ALV grid containers and objects
DATA:
o_alv_grid TYPE REF TO cl_gui_alv_grid,
o_alv_cont TYPE REF TO cl_gui_custom_container.
* ALV field catalog
DATA:
i_alv_fc TYPE lvc_t_fcat,
v_alv_fc LIKE lvc_s_fcat.
* ALV Layout (colors)
DATA:
v_alv_layout TYPE lvc_s_layo,
i_alv_color TYPE lvc_t_scol,
v_alv_color TYPE lvc_s_scol,
v_alv_color_cell TYPE lvc_s_colo.
* ALV variant
DATA:
v_alv_variant TYPE disvariant.
PARAMETERS:
p_alvvar TYPE disvariant-variant DEFAULT 'DEFAULT'.
DATA: ok_code LIKE sy-ucomm.
* Class for event handling
* CLASS lcl_event_receiver DEFINITION
* [+] Event listener for the ALV grid
* [+] Handles hotspots and data changes
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
* Hotspot clicking
hotspot_click
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id
e_column_id
es_row_no,
* Data changed (such as checkbox clicking)
handle_data_changed
FOR EVENT data_changed OF cl_gui_alv_grid
IMPORTING er_data_changed.
ENDCLASS. "lcl_event_receiver DEFINITION
* CLASS lcl_event_receiver IMPLEMENTATION
* [+] Implementation of the ALV Grid event handler class
CLASS lcl_event_receiver IMPLEMENTATION.
* METHOD hotspot_click *
* [+] Calls evvent_hotspot_click when a hotspot is clicked in the ALV
METHOD hotspot_click.
PERFORM event_hotspot_click
USING e_row_id
e_column_id.
ENDMETHOD. "hotspot_click
* METHOD handle_data_changed *
* [+] Updates the source data when the data in the ALV display has
* been changed, such as by clicking a checkbox.
METHOD handle_data_changed.
DATA: lv_changed TYPE lvc_s_modi.
LOOP AT er_data_changed->mt_good_cells INTO lv_changed
WHERE fieldname = 'CUST_NAME'.
READ TABLE i_alv_data INTO v_alv_data INDEX lv_changed-row_id.
IF sy-subrc = 0.
MOVE lv_changed-value TO v_alv_data-cust_name.
MODIFY i_alv_data FROM v_alv_data INDEX lv_changed-row_id.
ENDIF.
ENDLOOP.
ENDMETHOD. "handle_data_changed
ENDCLASS. "lcl_event_receiver IMPLEMENTATION
* Reference to the event listener class
DATA: event_receiver TYPE REF TO lcl_event_receiver.
* FORM build_event_listener
* [+] Set the event handler on the ALV Grid
FORM build_event_listener.
* Assigning the event listener to the ALV
CREATE OBJECT event_receiver.
SET HANDLER event_receiver->handle_data_changed FOR o_alv_grid.
SET HANDLER event_receiver->hotspot_click FOR o_alv_grid.
ENDFORM. "build_event_listener
* AT SELECTION-SCREEN
* ON VALUE-REQUEST FOR p_alvvar
* [+] Calls choose_alv_variant to ask the user to select an alv grid
* layout variant
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_alvvar.
PERFORM choose_alv_variant
CHANGING
p_alvvar
v_alv_variant.
* START_OF_SELECTION
START-OF-SELECTION.
PERFORM get_data.
SET PF-STATUS 'ALVSCREEN' IMMEDIATELY.
CALL SCREEN 2000.
* FORM get_data
* [+] Gets the data for the ALV grid
FORM get_data.
SELECT kunnr name1
INTO (v_alv_data-cust_id,
v_alv_data-cust_name)
FROM kna1.
APPEND v_alv_data TO i_alv_data.
ENDSELECT.
ENDFORM. "get_data
* MODULE build_alv_grid
* THIS SHOULD BE IN THE "PROCESS BEFORE OUTPUT" OF THE ALV SCREEN
* [+] Builds the ALV Grid objects
* [+] Calls to build the field catalog table
* [+] Loads the field catalog table into the ALV Grid
* [+] Loads the table data into the ALV Grid
MODULE build_alv_grid OUTPUT.
SET TITLEBAR '2000'.
* Also enables layout saving
PERFORM set_alv_variant
USING
p_alvvar
CHANGING
v_alv_variant.
* Building the grid and container on the screen
* NOTE: the container name MUST be upper-case
* Also, we don't want the objects to be created if in batch mode!
IF sy-batch IS INITIAL.
CREATE OBJECT o_alv_cont
EXPORTING
container_name = 'O_ALV_TABLE'.
ENDIF.
CREATE OBJECT o_alv_grid
EXPORTING
i_parent = o_alv_cont.
* builds the event listener
PERFORM build_event_listener.
* Color the cells
PERFORM color_cells.
* Build the field catalog
PERFORM build_alv_fc.
* Loads the data into the grid
CALL METHOD o_alv_grid->set_table_for_first_display
EXPORTING
i_save = 'A'
i_default = 'X'
is_variant = v_alv_variant
is_layout = v_alv_layout
CHANGING
it_outtab = i_alv_data
it_fieldcatalog = i_alv_fc.
ENDMODULE. "build_alv_grid OUTPUT
* FORM build_alv_fc
* [+] Constructs the ALV Grid field catalog table
FORM build_alv_fc.
CLEAR i_alv_fc.
REFRESH i_alv_fc.
* NOTE: the field name MUST be upper-case
* field heading hide hot
* name zero spot just
PERFORM:
alv_field USING 'CUST_ID' 'Cust ID' ' ' 'X' 'R',
alv_field USING 'CUST_NAME' 'Customer Name' ' ' ' ' 'L',
alv_field USING 'CUST_COLOR' 'Color' ' ' ' ' 'R'.
ENDFORM. "build_alv_fc
* FORM alv_field
* [+] Describes and constructs a single field for the ALV Grid field
* catalog. The field length and type are both obtained from the
* actual field passed in to this method.
* [+] Adds the constructed field to the ALV Grid field catalog table
FORM alv_field
USING
p_field_name TYPE c
p_heading TYPE c
p_hide_zeros TYPE c
p_hotspot TYPE c
p_justify TYPE c.
CLEAR v_alv_fc.
DATA:
lv_type(1) TYPE c,
lv_length TYPE i,
lv_heading_length TYPE i.
* get the type and length of this field
FIELD-SYMBOLS <field>.
ASSIGN p_field_name TO <field>.
DESCRIBE FIELD <field> TYPE lv_type OUTPUT-LENGTH lv_length.
* re-adjust the length to the length of the header, if too short
lv_heading_length = strlen( p_heading ).
IF lv_length < lv_heading_length.
lv_length = lv_heading_length.
ENDIF.
* NOTE: the field name MUST be upper-case
v_alv_fc-fieldname = p_field_name.
TRANSLATE v_alv_fc-fieldname TO UPPER CASE.
v_alv_fc-inttype = lv_type.
v_alv_fc-outputlen = lv_length.
v_alv_fc-coltext = p_heading.
v_alv_fc-seltext = p_heading.
v_alv_fc-hotspot = p_hotspot.
* Determining which fields should show zeros
IF p_hide_zeros = 'X'.
v_alv_fc-no_zero = 'X'.
v_alv_fc-lzero = ' '.
ELSE.
v_alv_fc-no_zero = ' '.
v_alv_fc-lzero = 'X'.
ENDIF.
v_alv_fc-just = p_justify.
* Add the field to the field catalog
APPEND v_alv_fc TO i_alv_fc.
ENDFORM. "alv_field
* FORM choose_alv_variant
* [+] Shows a popup that allows the user to choose the layout variant
* for the alv grid of the current program
* [+] Usually called by an AT SELECTION-SCREEN method.
FORM choose_alv_variant
CHANGING
p_variant_name TYPE disvariant-variant
p_variant TYPE disvariant.
CLEAR p_variant.
DATA:
p_exit_check(1) TYPE c.
MOVE sy-repid TO p_variant-report.
CALL FUNCTION 'LVC_VARIANT_F4'
EXPORTING
is_variant = p_variant
i_save = 'A'
IMPORTING
e_exit = p_exit_check
es_variant = p_variant
EXCEPTIONS
not_found = 1
OTHERS = 99.
IF sy-subrc = 0.
IF p_exit_check <> 'X'.
p_variant_name = p_variant-variant.
ENDIF.
ENDIF.
ENDFORM. "choose_alv_variant
* FORM set_alv_variant
* [+] Sets the alv grid layout variant. Used for setting the variant
* when its name is entered in a parameter rather than by using the
* popup, or when loading the variant from a variable of type C
FORM set_alv_variant
USING
p_variant_name TYPE disvariant-variant
CHANGING
p_variant TYPE disvariant.
MOVE sy-repid TO p_variant-report.
p_variant-variant = p_variant_name.
ENDFORM. "set_alv_variant
* FORM color_cells
* [+] Loop through the data and apply coloring
FORM color_cells.
DATA:
my_color TYPE i.
* tell the ALV grid what field in v_alv_data contains color information
v_alv_layout-ctab_fname = 'COLOR'.
my_color = 0.
* loop through each row of the table
LOOP AT i_alv_data INTO v_alv_data.
* clear the variables
CLEAR:
v_alv_color,
v_alv_color_cell,
i_alv_color.
REFRESH:
i_alv_color.
v_alv_data-cust_color = my_color.
PERFORM color_cell USING 'CUST_COLOR' my_color. "negative
* apply the colors
* IF v_alv_data-cust_name = 'Testing Credit'.
* PERFORM color_cell USING 'CUST_NAME' 6. "negative
* ELSEIF v_alv_data-cust_name = 'Goober Goober Also'.
* PERFORM color_cell USING 'CUST_NAME' 5. "positive
* ENDIF.
* set the color data for this table row
v_alv_data-color = i_alv_color.
MODIFY i_alv_data FROM v_alv_data.
my_color = my_color + 1.
IF my_color GT 7.
CLEAR my_color.
ENDIF.
ENDLOOP.
ENDFORM. "color_cells
* FORM color_cell
* [+] Colors a cell in the ALV grid
FORM color_cell
USING
p_cellname TYPE c
p_color TYPE i.
CLEAR:
v_alv_color_cell,
v_alv_color.
* set the color for the cell
* IF p_color = 0.
* v_alv_color_cell-col = 0. "cl_gui_resources=>list_col_background.
* ELSEIF p_color = 1.
* v_alv_color_cell-col = 1. "cl_gui_resources=>list_col_heading.
* ELSEIF p_color = 2.
* v_alv_color_cell-col = 2. "cl_gui_resources=>list_col_normal.
* ELSEIF p_color = 3.
* v_alv_color_cell-col = 3. "cl_gui_resources=>list_col_total.
* ELSEIF p_color = 4.
* v_alv_color_cell-col = 4. "cl_gui_resources=>list_col_key.
* ELSEIF p_color = 5.
* v_alv_color_cell-col = 5. "cl_gui_resources=>list_col_positive.
* ELSEIF p_color = 6.
* v_alv_color_cell-col = 6. "cl_gui_resources=>list_col_negative.
* ELSEIF p_color = 7.
* v_alv_color_cell-col = 7. "cl_gui_resources=>list_col_group.
* ENDIF.
v_alv_color_cell-col = p_color.
v_alv_color-nokeycol = 'X'.
v_alv_color-fname = p_cellname.
* v_alv_color-color = p_color.
v_alv_color-color = v_alv_color_cell.
APPEND v_alv_color TO i_alv_color.
ENDFORM. "color_cell
* FORM event_hotspot_click
* [+] What to do when clicking on a hotspot in the ALV Grid
FORM event_hotspot_click
USING
p_row TYPE lvc_s_row
p_column TYPE lvc_s_col.
DATA:
lv_docnum TYPE kunnr.
READ TABLE i_alv_data INTO v_alv_data INDEX p_row-index.
IF p_column = 'CUST_ID'.
* call a transaction when the cust_id is clicked
SET PARAMETER ID 'AUN' FIELD v_alv_data-cust_id.
CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
ENDIF.
ENDFORM. "event_hotspot_click
*& Module USER_COMMAND_2000 INPUT
* text
MODULE user_command_2000 INPUT.
CASE ok_code.
WHEN 'BACK'
OR 'STOP'
OR 'CANCEL'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_2000 INPUT -
Update all alv (grid) displayed records to internal table
Hi all,
i want to update the records into the internal table which are changed by the user in the edit field.
after he select save button.
i have to save the ALV grid displayed records in the internal table.
hw can i do this ?ALV with EDIT and SAVE functionality
Code:REPORT z_demo_alv_jg.*******************************************************************
TYPE-POOLS *
TYPE-POOLS: slis. *******************************************************************
INTERNAL TABLES/WORK AREAS/VARIABLES *
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
w_field TYPE slis_fieldcat_alv,
p_table LIKE dd02l-tabname,
dy_table TYPE REF TO data,
dy_tab TYPE REF TO data,
dy_line TYPE REF TO data.*******************************************************************
FIELD-SYMBOLS *
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
<dyn_wa> TYPE ANY,
<dyn_field> TYPE ANY,
<dyn_tab_temp> TYPE STANDARD TABLE.*******************************************************************
SELECTION SCREEN *
PARAMETERS: tabname(30) TYPE c,
lines(5) TYPE n.*******************************************************************
START-OF-SELECTION *
START-OF-SELECTION.* Storing table name
p_table = tabname.* Create internal table dynamically with the stucture of table name
entered in the selection screen
CREATE DATA dy_table TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_table->* TO <dyn_table>.
IF sy-subrc <> 0.
MESSAGE i000(z_zzz_ca_messages) WITH ' No table found'. LEAVE TO LIST-PROCESSING.
ENDIF.
Create workarea for the table
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.* Create another temp. table
CREATE DATA dy_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_tab->* TO <dyn_tab_temp>. SORT i_fieldcat BY col_pos.* Select data from table
SELECT * FROM (p_table)
INTO TABLE <dyn_table>
UP TO lines ROWS. REFRESH <dyn_tab_temp>.* Display report
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'SET_PF_STATUS'
TABLES
t_outtab = <dyn_table>
EXCEPTIONS
program_error = 1
OTHERS = 2. IF sy-subrc <> 0. ENDIF.&----
*& Form SET_PF_STATUS
Setting custom PF-Status
-->RT_EXTAB Excluding table
FORM set_pf_status USING rt_extab TYPE slis_t_extab. SET PF-STATUS 'Z_STANDARD'.ENDFORM. "SET_PF_STATUS&----
*& Form user_command
Handling custom function codes
-->R_UCOMM Function code value
-->RS_SELFIELD Info. of cursor position in ALV
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.* Local data declaration
DATA: li_tab TYPE REF TO data,
l_line TYPE REF TO data.* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
<l_wa> TYPE ANY.* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>. CASE r_ucomm.* When a record is selected
WHEN '&IC1'.* Read the selected record
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
rs_selfield-tabindex. IF sy-subrc = 0.* Store the record in an internal table
APPEND <dyn_wa> TO <l_tab>.* Fetch the field catalog info
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = 'Z_DEMO_PDF_JG'
i_structure_name = p_table
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.* Make all the fields input enabled except key fields
w_field-input = 'X'. MODIFY i_fieldcat FROM w_field TRANSPORTING input
WHERE key IS INITIAL. ENDIF.* Display the record for editing purpose
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
it_fieldcat = i_fieldcat
i_screen_start_column = 10
i_screen_start_line = 15
i_screen_end_column = 200
i_screen_end_line = 20
TABLES
t_outtab = <l_tab>
EXCEPTIONS
program_error = 1
OTHERS = 2. IF sy-subrc = 0.* Read the modified data
READ TABLE <l_tab> INDEX 1 INTO <l_wa>.* If the record is changed then track its index no.
and populate it in an internal table for future
action
IF sy-subrc = 0 AND <dyn_wa> <> <l_wa>.
<dyn_wa> = <l_wa>.
i_index = rs_selfield-tabindex.
APPEND i_index.
ENDIF.
ENDIF. ENDIF.* When save button is pressed
WHEN 'SAVE'.* Sort the index table
SORT i_index.* Delete all duplicate records
DELETE ADJACENT DUPLICATES FROM i_index. LOOP AT i_index.* Find out the changes in the internal table
and populate these changes in another internal table
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX i_index.
IF sy-subrc = 0.
APPEND <dyn_wa> TO <dyn_tab_temp>.
ENDIF. ENDLOOP.* Lock the table
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3. IF sy-subrc = 0.* Modify the database table with these changes
MODIFY (p_table) FROM TABLE <dyn_tab_temp>. REFRESH <dyn_tab_temp>.* Unlock the table
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table. ENDIF.
ENDCASE. rs_selfield-refresh = 'X'.ENDFORM. "user_command -
Push Button on Alv Grid display
Hi experts,
I strcuk in the middle of one program, i need to have push buttons on the output ALV Grid display, i have copied the standard status and used the same in the Function module for pf-status, iam able to get the output
but my requirement is how to add the push buttons to the out put screen, as when iam clicking on status which i have copied iam unable to find where to add these push button in the application tool bar, iam unable to edit the push button can any body help me out, thanks in advance.Hello Madan
I cannot help you with the FM-based ALV lists. However, for OO-based ALV grids (CL_GUI_ALV_GRID) I have a sample program that simulates radio buttons by using icons with hotspots.
PROGRAM ZUS_SDN_BCALV_GRID_DEMO_2.
* Based on: BCALV_GRID_DEMO.
TYPE-POOLS: icon.
TYPES: BEGIN OF ty_s_sflight.
INCLUDE TYPE sflight.
TYPES: button1 TYPE lvc_emphsz.
TYPES: button2 TYPE lvc_emphsz.
TYPES: button3 TYPE lvc_emphsz.
TYPES: button4 TYPE lvc_emphsz.
TYPES: END OF ty_s_sflight.
DATA:
gt_sflight TYPE STANDARD TABLE OF ty_s_sflight,
gt_fcat TYPE lvc_t_fcat.
DATA: ok_code LIKE sy-ucomm,
* gt_sflight TYPE TABLE OF sflight,
g_container TYPE scrfname VALUE 'BCALV_GRID_DEMO_0100_CONT1',
grid1 TYPE REF TO cl_gui_alv_grid,
g_custom_container TYPE REF TO cl_gui_custom_container.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
CLASS-DATA:
md_cnt TYPE i.
CLASS-METHODS:
handle_hotspot_click FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING
e_row_id
e_column_id
es_row_no
sender.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_hotspot_click.
* define local data
FIELD-SYMBOLS:
<ls_entry> TYPE ty_s_sflight,
<ld_fld> TYPE ANY.
READ TABLE gt_sflight ASSIGNING <ls_entry> INDEX es_row_no-row_id.
CHECK ( <ls_entry> IS ASSIGNED ).
* Set all radio buttons "unselected"
<ls_entry>-button1 = icon_wd_radio_button_empty.
<ls_entry>-button2 = icon_wd_radio_button_empty.
<ls_entry>-button3 = icon_wd_radio_button_empty.
<ls_entry>-button4 = icon_wd_radio_button_empty.
ASSIGN COMPONENT e_column_id-fieldname OF STRUCTURE <ls_entry>
TO <ld_fld>.
IF ( <ld_fld> IS ASSIGNED ).
* Set selected radio button "selected".
<ld_fld> = icon_wd_radio_button.
ENDIF.
* Force PAI followed by refresh of table display in PBO
CALL METHOD cl_gui_cfw=>set_new_ok_code
EXPORTING
new_code = 'DUMMY'
* IMPORTING
* RC =
ENDMETHOD. "handle_hotspot_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
* MAIN *
PERFORM select_data.
CALL SCREEN 100.
* MODULE PBO OUTPUT *
MODULE pbo OUTPUT.
SET PF-STATUS 'MAIN100'.
IF g_custom_container IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING container_name = g_container.
CREATE OBJECT grid1
EXPORTING i_parent = g_custom_container.
PERFORM build_fieldcatalog.
CALL METHOD grid1->set_table_for_first_display
* EXPORTING
* i_structure_name = 'SFLIGHT'
CHANGING
it_fieldcatalog = gt_fcat
it_outtab = gt_sflight.
* Set event handler for event TOOLBAR
SET HANDLER:
lcl_eventhandler=>handle_hotspot_click FOR grid1.
else.
CALL METHOD grid1->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
FINISHED = 1
others = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDMODULE. "PBO OUTPUT
* MODULE PAI INPUT *
MODULE pai INPUT.
* to react on oi_custom_events:
CALL METHOD cl_gui_cfw=>dispatch.
CASE ok_code.
WHEN 'EXIT'.
PERFORM exit_program.
WHEN OTHERS.
* do nothing
ENDCASE.
CLEAR ok_code.
ENDMODULE. "PAI INPUT
* FORM EXIT_PROGRAM *
FORM exit_program.
* CALL METHOD G_CUSTOM_CONTAINER->FREE.
* CALL METHOD CL_GUI_CFW=>FLUSH.
LEAVE PROGRAM.
ENDFORM. "EXIT_PROGRAM
*& Form BUILD_FIELDCATALOG
* text
* --> p1 text
* <-- p2 text
FORM build_fieldcatalog .
* define local data
DATA:
ls_fcat TYPE lvc_s_fcat,
ls_hype TYPE lvc_s_hype.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
* I_BUFFER_ACTIVE =
i_structure_name = 'LVC_S_FCAT'
* I_CLIENT_NEVER_DISPLAY = 'X'
* I_BYPASSING_BUFFER =
* I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
DELETE gt_fcat WHERE ( fieldname <> 'EMPHASIZE' ).
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
EXPORTING
* I_BUFFER_ACTIVE =
i_structure_name = 'SFLIGHT'
* I_CLIENT_NEVER_DISPLAY = 'X'
* I_BYPASSING_BUFFER =
* I_INTERNAL_TABNAME =
CHANGING
ct_fieldcat = gt_fcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE gt_fcat INTO ls_fcat
WITH KEY fieldname = 'EMPHASIZE'.
IF ( syst-subrc = 0 ).
DELETE gt_fcat INDEX syst-tabix.
ENDIF.
ls_fcat-fieldname = 'BUTTON4'.
ls_fcat-icon = 'X'.
ls_fcat-hotspot = 'X'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON3'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON2'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
ls_fcat-fieldname = 'BUTTON1'.
INSERT ls_fcat INTO gt_fcat INDEX 4.
LOOP AT gt_fcat INTO ls_fcat.
ls_fcat-col_pos = syst-tabix.
MODIFY gt_fcat FROM ls_fcat INDEX syst-tabix.
ENDLOOP.
ENDFORM. " BUILD_FIELDCATALOG
*& Form SELECT_DATA
* text
* --> p1 text
* <-- p2 text
FORM select_data .
* define local data
DATA:
ls_sflight TYPE ty_s_sflight.
SELECT * FROM sflight INTO CORRESPONDING FIELDS OF TABLE gt_sflight.
ls_sflight-button1 = icon_wd_radio_button.
ls_sflight-button2 = icon_wd_radio_button_empty.
ls_sflight-button3 = icon_wd_radio_button_empty.
ls_sflight-button4 = icon_wd_radio_button_empty.
MODIFY gt_sflight FROM ls_sflight
TRANSPORTING button1 button2 button3 button4
WHERE ( carrid IS NOT INITIAL ).
ENDFORM. " SELECT_DATA
Regards
Uwe -
Problem with check box in ALV Grid Display
I am Displaying Material Master Data in ALV Grid Display with Check Box for each record and if i checked check box then i am processing Update operation in Database, my question is after perform update operation check box should be clear.
Kindly help me!!!!Hello Raj
Given the fact that you do not tell us the most important piece of information (namely whether you are using OO-based ALV or not) I assume you are using fm-based ALV lists.
In this case you probably have defined a USER_COMMAND routine as described in the documentation of the fm.
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
* define local data
DATA: ls_outtab LIKE LINE OF gt_outtab,
ld_idx TYPE i.
LOOP AT gt_outtab INTO ls_outtab
WHERE ( chkbox = 'X' ).
ld_idx = syst-tabix.
" Call your update function / method / perform
ls_outtab-chkbox = space.
MODIFY gt_outtab FROM ls_outtab INDEX ld_Idx
TRANSPORTING chkbox.
ENDLOOP.
" And now trigger refresh of the ALV display:
rs_selfield-refresh = 'X'. " <<< !!!
ENDFORM.
Regards
Uwe -
Two ALV Grid Display format on the Single page
Hi guru's
I have two plant details. I want to be display these two plant details in the single page with ALV Grid display format.. like
plant no 1(Details):
xxxx xxxx xxxx xxxx with ALV Grid Display format
plant no 2 (Details):
xxx xxxx xxxx xxxx ALV Grid Display format
Can any body help on the .. if you have sample code pls paste.
Thanks in Advance
Surendrahi,
Grid display is not possible but u can display two list on same page by Block ALV....
TYPE-POOLS : slis.
TABLES : mara,
makt.
SELECT-OPTIONS : mat FOR mara-matnr.
DATA : BEGIN OF itab OCCURS 0,
matnr LIKE mara-matnr,
maktx LIKE makt-maktx,
matkl LIKE mara-matkl,
mtart LIKE mara-mtart,
END OF itab.
DATA : BEGIN OF itab1 OCCURS 0,
mtart LIKE mara-mtart,
count TYPE i,
END OF itab1.
DATA : BEGIN OF itab1_col OCCURS 0,
mtart LIKE mara-mtart,
count TYPE i,
END OF itab1_col.
DATA : t_fcat1 TYPE slis_t_fieldcat_alv,
t_fcat2 TYPE slis_t_fieldcat_alv,
wa_fcat TYPE slis_fieldcat_alv,
t_eve TYPE slis_t_event,
wa_eve TYPE slis_alv_event,
t_layout TYPE slis_layout_alv.
DATA : v_repid LIKE sy-repid,
t_mat LIKE mara-matnr.
DEFINE create_fcat.
clear wa_fcat.
wa_fcat-fieldname = &1.
wa_fcat-seltext_l = &2.
wa_fcat-outputlen = &3.
append wa_fcat to t_fcat1.
END-OF-DEFINITION.
START-OF-SELECTION.
PERFORM get_data.
PERFORM dis_data.
*& Form get_data
text
FORM get_data.
SELECT amatnr bmaktx amtart amatkl INTO CORRESPONDING FIELDS OF TABLE itab
FROM mara AS a INNER JOIN makt AS b ON
amatnr = bmatnr
WHERE a~matnr IN mat.
LOOP AT itab.
itab1-mtart = itab-mtart.
itab1-count = 1.
APPEND itab1.
ENDLOOP.
SORT itab1 BY mtart.
LOOP AT itab1.
MOVE-CORRESPONDING itab1 TO itab1_col.
COLLECT itab1_col.
ENDLOOP.
ENDFORM. "get_data
*& Form dis_data
text
FORM dis_data.
v_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = v_repid.
REFRESH t_fcat1.
CLEAR t_fcat1.
REFRESH t_eve.
wa_eve-name = 'TOP_OF_PAGE'.
wa_eve-form = 'TOP_OF_PAGE1'.
APPEND wa_eve TO t_eve.
create_fcat:
'MATNR' 'Material' '10',
'MAKTX' 'Material Description' '40',
'MTART' 'Type' '10',
'MATKL' 'Group' '10'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = t_layout
it_fieldcat = t_fcat1
i_tabname = 'ITAB'
it_events = t_eve
TABLES
t_outtab = itab.
REFRESH t_fcat1.
CLEAR t_fcat1.
REFRESH t_eve.
wa_eve-name = 'TOP_OF_PAGE'.
wa_eve-form = 'TOP_OF_PAGE2'.
APPEND wa_eve TO t_eve.
create_fcat:
'MTART' 'Type' '10',
'COUNT' 'Total' '5'.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = t_layout
it_fieldcat = t_fcat1
i_tabname = 'ITAB1_COL'
it_events = t_eve
TABLES
t_outtab = itab1_col.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'.
ENDFORM. "dis_data
*& Form top_of_page1
text
FORM top_of_page1.
FORMAT COLOR COL_POSITIVE.
WRITE:/ 'First Block'.
FORMAT COLOR OFF.
ENDFORM. "top_of_page
*& Form top_of_page2
text
FORM top_of_page2.
FORMAT COLOR COL_NEGATIVE.
WRITE /5 'Second Block'.
FORMAT COLOR OFF.
ENDFORM. "top_of_page
reward if usefull....
Maybe you are looking for
-
How to schedule a program in background after 5 or 10 sec
Hi All, Can anyone tell me how to schedule a program after 5 or 10 sec in background after the transaction is completed. It is not a custom transaction. I want to execute a Z program in background in a BADI Regards Yathish Message was edited
-
Please tell me why error is comming in select query
Hello Experts... please tell me why the error is comming at mblnr in s_mblnr.and also tell me the solution for the same. SELECT a~mblnr a~bwart a~matnr a~werks a~lifnr a~menge b~budat I
-
System service not activate in managed system
Hello, I am implementing SAP Solution Manager Diagnostics. 1. I am working in Phase 3 - Managed System Configuration 2. Connect Managed system. When I start this step, I get this error : Please import the actual support package for SAP_BASIS or activ
-
Problem starting Adobe After Effects CS5 Trial
Hey there, I have a huge problem starting AE5 Trial and well I looked around several Discussions about the problem without anything that'd help me. I used to work with an older version of AE, borrowed by my filmbuddy, on my old desktop without any pr
-
How can use java emulate ping function?
When I type ping xxx.x.xx.x,it would send a icmp package. If the remote mechine has no echo,it would wait too long. So Making a runtime process to invoke ping command directly is not efficient. My single aim is showing the remote mechine exiting or n