Refreshing stanby database

hi,
I've got stanby database and I am trying to refresh it from incremental backup of primary database, as follows
- check CHECKPOINT_CHANGE# on standby
- backup incremental from SCN database on primary
- recover database noredo on standby
everything looks fine, rman is apllying correct backupset but CHECKPOINT_CHANGE# and current_scn on standby database do not change, why? how can I check if recover was succesfu; ?
thanks for any advice

From the docs current_scn is not updated unless the db is open or you are in managed recovery:
CURRENT_SCN NUMBER Current SCN; null if the database is not currently open. For a standby database, the current standby redo application SCN.
you could check v$archived_log
SELECT MAX(SEQUENCE#), THREAD# FROM V$ARCHIVED_LOG GROUP BY THREAD#;
or even
select group#, thread#, sequence#, status, last_change# from V$standby_log;

Similar Messages

(SOLVED)Problems during installation, can not refresh package database

I have been using Arch for a year (dual boot) but for some reasons I had to do a reinstall. It worked fine, but I did some things wrong and I had too reinstall (again, befor even entering the system). This time (and all the other times i've tried today) I can not complete the "select packages" step, it either freezes at "Refreshing package database" or gives me a message that it just can not be done (sorry, I do not have the exact words atm). I have internet and I've been trying a million different mirrors (including the one I used when it worked). What to do, what to do?
Worth noting is that I had the same problems a year a go, but it solved it self, no idea what I did then.
I would really appreciate if some one knew what was going on - it is driving me crazy beyond comprehension!
EDIT: maby this should have been pasted in the installation section?
EDIT2: Title
Last edited by elprofundo (2011-12-18 16:15:29)

I am sorry, it is during the installation and no command is in use (correct me if I'm wrong) - the tty7 is just reading "Synchronizing package database", the last times i've tried it didbn't 't continue for hours, other times it gives me an error message (which I haven't written down, sadly). I'm trying again atm.
EDIT: The error message I get is just
"error: failed retrieving file 'core.db' from mirror.optus.net
// mirrors.kernel.org : Connection timed out
Last edited by elprofundo (2011-12-15 21:47:59)

Shows follwing error when trying to refresh the database?

Hi All,
When i try to refresh the database its showing the following error.
com.hyperion.planning.HspCubeRefreshInProgressException: Cannot complete your request because the database is being refreshed.
Please let me know ASAP how to reslove the issue.
Cheers,
Kittu.

Looks there is an other process running on the database, you can check from EAS sessions or check logs for other activity running on the application.
If you think that nothing is running & no users logged in, you can try unlock application from planning/essbase outline and try refresh.
But pretty sure that some other activity is running on application, like sec refresh or data load or users trying to retrieve/load...etc...hope this helps.

Need a good guide on Refreshing a Database

Hi guys.. i am looking for a good guide which can help me get thru the best practices for refreshing a database step by step.
Regards
Monu Koshy

Hi guys.. i am looking for a good guide which can
help me get thru the best practices for refreshing a
database step by step.what do you mean by refreshing a database?
Do you want to reorg the segments in your database or sync the database with some other database?

DEactivate refresh or Database

Hello,
i try to open a report with saved Data, but the report allways would refresh the database connection. Can i deactivate this Check/ Refresh ?
I only need the saved Data in the Report.
If i open the Report with the designer , i will also get the question to logon.
I have nearly 10000 Files to open and export with this program.
The Reports designed with CR 8.5 The program is written in VS 2003.
I use the cr-dll Versions : 11.0.3300.0
Every Answer is kindly.
Thanx
Hendrik

Are the CR 8.5 and CR XI installs on the same computer, or on two different computers? E.G.; if CR 8.5 is on computer A and that computer contains the datasource it may be connecting to the database. And if CR XI is on a different computer, the datasource may not be defined there, so the database logon(?).
Also, In the original post you mention this:
"I only need the saved Data in the Report."
But in the last post you say:
"Is it possible to convert automatically or do this flags in the code?"
This brings up the question; Are you trying to upgrade the reports to CR XI, or simply read saved data in these reports?
Also, ensure that you have the latest Service pack for CR XI. this can be downloaded from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006008952008E/crXIwin_sp4.zip
Ludek

Refresh 11g database from existing 10g

hi
we are doing upgradation of 10g db to 11g and i have already cloned the 10g db to 11g using full datapump and since then we are working on 11g for additional application software .
now we need to studown 10g db and make 11g db in use. so i just need to refresh the 11g db with the changes we made to existing db sinse last time i cloned the db.
is full datapump is gonna work as it will drop everything and overrites it but we have created new tables and tablespaces for applications on 11g db ,so this will drop them too.
what is the effecting method to refresh the database.
thanks
gagan

Yes datapump will work here. In a clean way you can just drop all the objects and import the new copy in to it or else you can use import including table_exists_action with truncate option
Thanks
Sravya

Error refreshing Planning Database

Hi Friends,
I am not able to refresh the database in Planning.
I am getting following error at step2(Setting Locaiton Aliases) "java.lang.UnsatisfiedLinkError: no HspEssbaseOutlineAPI in java.library.path"
Anyone please guide me.

It worked well before.
But after we copied the schema from Prod to dev . Then I tried to login dev environment and refresh. From that time onwards I am facing the isssue.
Thanks,
Vishnu.L

Need query for refresh test database.

Hi,
I want refresh production database to test database refresh using expdp dumpfile. Please provide steps this is the requirement
This request is to refresh the Tecnomatix test database MFEM which is
on the NATEST server wnmcdwtk.natest.gm.com. This database needs to
be refreshed using an Oracle full backup dump file from the Tecnomatix
production database MFEP which runs on the production NAENG server
wnmcdds8.naeng.gm.com. The MFEM and MFEP databases are both at Oracle
v10.2.0.4.

Hi,
You have posted to the wrong section of the forum. This forum us for Berkeley DB.
Regards,
Alex Gorrod
Oracle Berkeley DB

Difference between r/3 refresh and database refresh

Dear guru's
what is the difference between system refresh and database refresh.........And what is the process of both....... please give me end to end nogotiate............
Regard's
rajkumar

Hi Raj,
Database refresh, I believe is one of the ways you could refresh your SAP systems.
E.g Oracle database specific refresh is one of the ways. In this, I think you would export, move and then import cold backup of the database.
Easiest way to get more information is to search for the System refresh (or System copy) master guide from Market place or help.sap.com.
Regards,
N.

Table does not refresh after database level action

We have defined an Advanced table on a VO to represent invoice lines. The VO is referenced by a VL from the invoice header.
At one point during our process, a database level package is executed on the current lines. We have a "Requery" button to refresh the lines, however, the lines do not refresh unless we exit the invoice entirely and come back to it via the VL.
How can we refresh the lines on a current table after a database level transaction occurs?
Thanks, Jerry.
Our AM code is as follows...
// handleRefreshInvoiceLines( )
public void handleRefreshInvoiceLines()
OAViewObject vo = (OAViewObject)getInvoiceLinesVO1( );
if( !vo.isPreparedForExecution( ) )
getTransaction( ).validate();
vo.executeQuery( );
clearVOCaches( "InvoiceLinesEO", true ); // troubleshooting
} // handleRefreshInvoiceLines()

Thank you. I've moved clearCache around a bit. apparently vo.isPreparedForExecution() is false. I wonder why?
--Jerry.

How can I get iTunes to refresh its database of the music on my PC?

This is what I want to do:
1.Delete a lot of tracks in various folders on my hard drive
2.Then get iTunes to run through its database and compare to my hard drive and remove any references to tracks it can no longer find.
How do I do this? I can't find a way of getting iTunes to order the tracks by folder location, nor does there seem to be a refresh method.
If you want to know why I want to do this:
I had a bunch of music on my PC when I installed iTunes. So iTunes added all the music it could find to its database but basically without any info, like Artist/Album etc etc.
Now, I don't mind importing my CD's again so that iTunes can organise it properly with all the info and track order info, but how do I get iTunes to forget about the stuff that was originally imported? Bearing in mind that I don't want to forget about everything, and also there doesn't seem to be a way of ordering the music by location. If there was, I could just ordrer it that way and then select the tracks I want to delete.
Thanks in advance...
Generic Windows 2000

After a couple of days, I'm noticing that the repeat(ing) offenders have more than 10 episodes, and seem to keep repeating them every time I sync.
They only show once in my phone and in the iTunes Podcasts, but through iTunes and looking at what's in my phone is when I see the repeats.
Even after I've marked a podcast as played, and deleted it from within my phone, as well as telling iTunes to delete the played episodes, it still shows multiples of the played episodes.
There doesn't seem to be any rhyme or reason to it either. They aren't the newest ones either.

How to find the last refresh of database?

Hi,
Can someone tell me how to find when was the last refresh of a database was done.

Now it is much better!!!
1. If the cloning was done using a cold backup of
database, how can we know when was the last cloning
on testing db done.If the cloned database has been opened with RESETLOGS option, you can try checking out V$DATABASE.RESETLOGS_TIME. if the V$DATABASE.CREATED is not equal to V$DATABASE.RESETLOGS_TIME...there is a possibility that it might be opened with resetlogs option. I don't have the required set up to check and confirm this myself....but this is something you can get it a shot.
2. If export/import utility is used for this purpose,
the how can we find out the last time the testing db
was 'refreshed'?If import was used, check the object creation timestamps of majority of them...may be it will help you find the required information.
HTH
Thanks
Chandra Pabba

How to refresh the database from target to clone system using RMAN ?

I created the database using RMAN from target (Node A) to clone (Node B)
I want to refresh the data what are all the changes happened in (Not complete database only chages) target to clone system using RMAN ? or any other way?

I want to refresh the data what are all the changes
happened in (Not complete database only chages)
target to clone system using RMAN ? or any other way?Incremental changes can't apply, once database is open using RMAN or any other B&R method.STREAMS can be use to capture and apply changes.
Cheer,
Virag

Stanby database issue : VERY URGENT

we have stanby configured for 9.2.0.4 on AIX 5.2.0.0.Recently we added a new datafile to a tablespace in physical database in the new filesystem. But this path was not reflected in the standby database. NOw what happened is when the standby is put in recover mode it throws error datafile 4 /ora1data/dba/data1.dbf could not be found.
Later we have reflected the same in the standby also, but still we are getting the same error.
We have set standy_file_management=auto
How to go with this
kumaresan

Is this a physical or logical standby?
In the case of a physical standby, files added to the primary should be added automatically to the secondary DB.
Perhaps you missed some error message in the standby alert log file. It should tell you what went wrong.

Webi Refreshing Error :database name not found and no default driver specified

Hi All,
When I refreshing the webi report from Launchpad getting bellow error
"database name not found and no default driver specified"
Bellow is the Screen shot
It is refreshing in webi Rich client (server and client tools are in same system) but not from Launch pad
1. Environment :BI 4.0 SP4
2. Server and client tools are installed in same system
3. Created a 32 bit odbc, universe connection is responding properly and report refreshing in rich client(I could not find 64 bit odbc) .
Can Please suggest me where I am doing wrong
Regards,
Mahi

Hi Mahi,
Seems like your BO server is 64 bits and you have created a 64 bits DSN; whereas your database requires 32 bits DSN.
Try below steps:
1. Navigate to the C:\Windows\SysWOW64 directory and open odbcad32.exe. This will open the ODBC Data Source Administrator for 32-bit drivers on the 64-bit server. NOTE: The ODBC Data Source Administrator that is located by clicking Start and Administrative Tools will only create 64-bit ODBC connections.
2. Click on the System DSN tab
3. Click on Add to create a new Data Source
4. Provide the database details
5. Your 32-bit ODBC data source is now ready for use.
Hope it will help.
Regards,
Yuvraj

Refreshing stanby database

Similar Messages

Maybe you are looking for