Refreshing tab strip

Hello Experts,
I am working on Web Dynpro Java and I have created two tab strips and when I select the first tab for the first time the contents of that tab strip gets generated and the same with the second one. Now when I make changes in the second tab and then come back to the first tab... the changes in the second tab is not reflected in the first tab, it shows the same content. but when I refresh the page the changes are seen. Can any one help me out on refreshing the tab strip when I select it each time.
I think WDPortalEventing.fire might be a solution but dont know how to implement it. If this will solve my question then can any one help me out on this too please
the short form : I want to refresh the tab strip each time i select it.
Thanks in advance

Hi Satish,
Just bind a new action to onSelect Event of the TabStrip. You don't have to write any code within to trigger this event when you make a switch from one tab to another within a tab strip. In case. you want to perform any function/validation to switch of tab then you can write the in the implementation of this action bound to onSelect Event of the TabStrip.
Regards,
Tushar

Similar Messages

Tab Strip with multiple views refresh issue

I have created a tab strip with two tabs. Each tab has a view container element. Each view has an iFrame which points to an ABAP report exposed as a web service (url). I put a refresh button on the first view which fires an outbound plug which is directed to the same view. This refreshes the first view just fine. However, it also refreshes the second view. I don't want to refresh the second view. Is there a way around this?

Hello Kenneth,
i would try another way and use [Suspend&Resume|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/45/19bf8c16f25d7ae10000000a11466f/content.htm]. But that works only on component-level. So i would create 3 components A,B,C.
Comp A has a tabstrip and inside each tab a ViewContainer Element (VCUI). Inside the VCUI's you call (the used) components B and C using Suspend & Resume Plugs. Components B and C only have one view each with an iframe calling the specific report.
So you can refresh both components differently.
Kind regards, Andreas

Using tab-strip

Hi all...
can any body tell me how to use tab-strip control in screens.
Thanks a lot...

hi
Check the coding..
REPORT ZKA_TABSTRIP .
TABLES: ZKA_EMP,ZKA_COM.
CONTROLS: TS TYPE TABSTRIP.."""""""""Declare
DATA: SCREENNO(4) TYPE N. """""Screen no
CALL SCREEN '0003'. """""""""""""""""Call the screen
*& Module STATUS_0001 OUTPUT
text
MODULE STATUS_0001 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
IF SCREENNO IS INITIAL.
TS-ACTIVETAB = 'EMP'.
SCREENNO = '0002'.
ENDIF.
ENDMODULE. " STATUS_0001 OUTPUT
*& Module USER_COMMAND_0001 INPUT
text
MODULE USER_COMMAND_0001 INPUT.
IF SY-UCOMM = 'EMP'.
TS-ACTIVETAB = 'EMP'.
SCREENNO = '0002'.
ELSEIF SY-UCOMM = 'COM'.
TS-ACTIVETAB = 'COM'.
SCREENNO = '0003'.
ENDIF.
ENDMODULE. " USER_COMMAND_0001 INPUT
*& Module USER_COMMAND_0002 INPUT
text
MODULE USER_COMMAND_0002 INPUT.
IF SY-UCOMM = 'DISPLAY'.
SELECT SINGLE * FROM ZKA_EMP WHERE EMPNO = ZKA_EMP-EMPNO.
ELSEIF SY-UCOMM = 'SAVE'.
INSERT ZKA_EMP.
ELSEIF SY-UCOMM = 'REFRESH'.
CLEAR ZKA_EMP.
ELSEIF SY-UCOMM = 'EXIT'.
LEAVE PROGRAM.
ENDIF
PROCESS BEFORE OUTPUT.
MODULE STATUS_0100.
call SUBSCREEN ts4 INCLUDING sy-repid SCREENNO ."""""""""""Specify the screen no
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
call SUBSCREEN ts4.
thanks
Dharma

Using a variable in refreshing tab

Hi all,
i want to use the following query in the refreshing tab of a variable
select count(*) from Scott.abc where scott.abc.filename=#filename
where #filename is a declare variable that contains the name of a file(text) .
But when i execute this variable, it is giving invalid sql format.
So can i use a variable in the refreshing tab of a variable??? if so.. how??
Or if not then how do i compare the value of a column of a database table with the value stored in an odi variable.
Kindly help.
Thanks in advance.

Easy method to debug such issue is to copy your SQL [ select count(*) from Scott.abc where scott.abc.filename=#filename ] into any SQL Editor.
Secondly copy the value of the #filename from the History tab of the variable from the Operator and substitute in the above query and run that should give you a more clear idea .
It would not only help in this issue too but other issues when you are fetching values from variable or query .
hope this helps.

How to remove the search bar in the tab strip?

My latest firefox update includes a search bar IN THE TAB STRIP on top of the page (not the one in the navigation toolbar). It takes up too much space for the tabs and it is useless (since there is already a search bar below it in the navigation toolbar). How do I remove it?

I was able to fix the problem in Safe Mode. It was an extension disguised as a Firefox original part, named itself as "firefox default tabs." I am not sure how I got it since I have not downloaded anything recently. My Kaspersky did not block anything as well. But, huge thanks!

Data not storing in Custom infotype build with tab strips

Hi All,
I have created one custom infotype 9030,
With screen 2000.
which is having tab strips, I have build the screens refering to p9030-zztest its not storing in database.
where I am doing wrong...please let me know what should be done in this case.
Regards
Satish.v

Hi,
Checkout the below link :
<link to blacklisted site removed by moderator>
Shailaja Ainala.
Edited by: Thomas Zloch on Jan 28, 2012 9:06 PM

How can i keep multiple tabs in the tab strip without them compressing into one tab?

when i open more than 6 windows , they all compress into one tab from where i have to access pages with a drop down menu. i want all the tabs to open up and the individual tabs to appear separately on the tab strip which can be scrolled up or down. thank you

hi
the problem is in the firefox tab strip at the bottom of the page. i have attached two screenshots . when i open more than 6 tabs, they all get compressed into 1 tab. i want all tabs to stay open individually, and the tab strip should therefore have a page scroller icon forming when many tabs open. i have had this in the earlier computer i had, but recently got a new one. now i cant figure how to set firefox to do what i need.
thanks

In FF 7.0.1, the New Tab button on the Tab Strip disappeared after clicking the Tab Group icon and trying to return, so I'm looking for advice on how to get the New Tab to reappear on the Tab Strip.

In Windows Vista, FF 7.0.1, I selected the Tab Group button to try it out. However, when I selected the Tab Group button again to close that view, the New Tab button in the Tab Strip no longer appears. I'm requesting help to restore the New Tab button (has the "+" sign on it) on the Tab Strip just to the right of the currently open tabs.

You can find the New Tab button showing as a '+' on the Tab bar.
You can open the Customize window and drag the New Tab button that shows as a plus sign (+) from the Tab bar on another toolbar and it will become a regular toolbar button like the New Tab button that you have in Firefox 3 versions.<br />
Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"
If you can't find the New Tab button then click the "Restore Default Set" button in the Customize window.
If you want the New Tab button at the far right end of the Tab bar then place a flexible space to the left of it.

Open tabs are not on tab strip. Have to click on List All Tabs button to find tabs. Tabs used to display on tab strip and stopped doing this. Suggestions?

Been using Firefox for years, running Windows XP. This morning when I opened pages in another tab, did not see them on tab strip. Only way to find them is to click on List All Tabs Button and it shows list. Cannot get them to display on tab strip. If I open in another window, it works, like it should. If I click on plus sign on tab strip it opens another tab, but can't see the previous ones except with List All Tabs Button. Any suggestions on how to turn tab strip back on? Thanks, jayem33

If it works in a new window then you can drags tabs from the not working window to that new window.
You can also try to close the tabs via Ctrl+W and restore the closed tabs via Shift+Ctrl+T

How to get active tab strip name using standard function ?

Dear all,
I have 5 Tab strip in my view, how can i know which tab strip is active during runtime ?
Best Regards
Fernand

HI
I hope you may be looking at this thread , hope its a similar requirement as yours
How to get the selected Tab from a TabStrip.
Thanks

How to change the name of Customer Tab strip .

hi
For Tcode ME21N ME22N and ME23N I have added a screen exit to PO header tabstip .The name that is appearing is "Custumer data " as tab stip text , i want ot change this tab strip name. can u please suggest me how to do it.
Below are the details.
function group:MEGUI
screen :1102
Reagrds
Avik

Hi Avin,
you must have created a project in CMOD for this enhancement.
Go to the same project in CMOD.
Select Componenets radio button on cmod and go inside.
you will find Menu exit option on the coponenet screen.
double click on function code like +Co1( in prod order) and enter function text as your desired name instead of customer data. save the same and activate the project.
it should make required chnages.

Number of Tab Strips in BSP pages of E-Recruitment

Hello,
We have a problem with number of tab strips visible per page in Job Interest Wizard page of E-Recruitment.
The default number of tabs are 5 per page.
In our case we put a large text in each tab (as per our business requirement), so these tabs extending beyond the page width and thus a horizontal scroll is appearing.
We do not want this horizontal scroll as some of the inputs fields with asteric () , the asteric () is not visible to the user unless he scroll the page to the right.
We wanted to either display only 4 tabs page or wrap the text if these tabs, so that all 5 tabs exactly fit in the screen.
I have no clue on which BSP application is handling these tabstrips for Job Interest Wizard.
Any suggestions is rewarded
Thanks in advance,
Regards
Raghu Kolukuluri

Someone provided this answer to me with regards to number of tabs visible on a wizard;
The class that needs to be changed is CL_HRRCF_BSP_EXT_CONTAINERSEQ.
To modify the number of tabs shown (in addition to other parameters) you
can go to method GET_CS_ITEM and change the call to the factory method.
The code looks like this:
lo_cs ?= cl_phtmlb_containersequence=>factory(
    collapsed             = 'false'
    collapsible           = 'false'
    design                = 'transparent'
    hascontentconnector   = 'false'
    hastitle              = 'true'
    id                    = lv_id
    maxvisibleitems       = '5'
    scrollableitems       = 'true'
    selectedindex         = controller->selected_index
    showstepnumber        = 'true'
    titleselected         = 'false'
    items                 = lt_items ).
Maxvisibleitems is the number of tabs show at once. Showstepnumber
determines if the tabs are numbered. Setting this to false may save some
space.
Hope this helps
Sandra

Messages issue in message area of Tab Strip

Hi ,
Iu2019m having 2 tabs in my Tab strip.
Tab1 u2013 First tab.
Tab2 u2013 Second tab.
In both the tabs I have message areas.
On click of a button in Tab1, iu2019m displaying an error message in the message area,
but the same message is appearing in the message area of the tab2.
I want to display messages to its corresponding tab only.
Thanks,
Shravan

Hello Shravan,
the message area is a common container so the messages that are raised in that serverrountrip will be displayed in all the message area ui element.
solution would be to create an action handler method for the tabStrips' onSelect event (inorder to trigger the server roundtrip). this roundtrip will flush the stateless messages and you can raise new messages for second tab elements.
hope this solves your problem.
BR, Saravanan

User changes in tab strip ui element are not recorded in context change log

Hi All,
We are using a tab strip ui element in webdynpro component. But user changes inside tab strip ui element are not getting recorded to the context change log. I have an input field on the same view besides tab strip ui element. User changes to this input field are getting recorded to the context change log.
Is there any restriction on context change log usage with tab strip ui element?
Could you please suggest If there is any way to record changes inside tab strip ui element.
Thanks,
Sudheer.

I think there are some limitations exists, context change logs are not complete when you do value help , i am not sure about tab strip.
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/47/a8e5d273b12fe2e10000000a42189d/content.htm]

Call report selection screen in module pool program with tab strip control

Hi,
Could anyone explain in detail to call report selection screen in module pool program with tab strip control.
Thanks
Mano

Hi,
Refer std program:
demo_sel_screen_in_tabstrip.
demo_sel_screen_with_tabstrip.
Call your program with SUBMIT stmt form module program.
Reward points if this Helps.
Manish

Refreshing tab strip

Similar Messages

Maybe you are looking for