Refreshjob error when refreshing php data/services

Hey
I read somewhere that this might be related to the fml file that is updated every time when you do changes to the service.
Is there any tool / way to fix the broken fml file ?
any other idea that might be cause this?
Cheers
Lare

Similar Messages

Error When Refresh Formatted Data inside Excel Analyzer

I have build a Excel template and load up this to the BI Publisher Server. When I call this template after the log in works fine. When I refresh the data normal it works also fine, but when I try to refresh formatted Data I get the error "Error: This report does not support HTML as an output format." I will not use html output inside Excel, I will use the original Excel template with refreshed data.

Hi Tim,
The Refresh Formatted Data works on MS Excel 2003.
May need to check if its really supported on MS Office 2002.
Btw another question, is it possible to create an excel template without using Excel Analyzer?
Also when I used the generated excel file of Excel Analyzer as template, when the report is generated the data sheet sometimes is not filled with correct data or sometimes there is no data at all, even if the parameters used is the same as the one used in generating the original excel file using Excel Analyzer. This happens most of the time for reports with Concatenated Queries or SQL Queries using "CURSOR" to group a set of data. Note that on initial generation of excel file using Excel Analyzer, correct set of data is displayed. It is only when it is used as template and viewed/exported in Excel format that data is not properly loaded.
Please advise.
Thanks!
Uniz

Flash Builder 4.5 Auto-Gen Code For PHP Data Service Produces Errors

Hello
I'm currently running a fresh install of MAMP on my Mac and when I start a new flex project, add a php data service that pulls from a mysql database I have. Everything works fine until I try to compile. The error I'm getting is 'uid' being the primary key which is a bigint(20). The file _Super_Users.as (auto-gen based on the user table below) reports 2 errors: [Managed] requires uid to be of type 'String'. (same error on 2 lines of code) Now the MySQL table wants it to be a int, the auto gen code seems to want it to be an int as well but for some reason its putting in these requires for String on the getter and setters for 'uid'. The is before I even add any of my own code, just auto-gen then compile.
     * data/source property getters
[Bindable(event="propertyChange")]
    public function get uid() : int /*error line*/
        return _internal_uid;
     * data/source property setters
    public function set uid(value:int) : void /*error line*/
        var oldValue:int = _internal_uid;
        if (oldValue !== value)
            _internal_uid = value;
This is what my database looks when I export it:
CREATE TABLE `users` (
`uid` bigint(20) unsigned NOT NULL,
`name` varchar(150) NOT NULL,
`first_name` varchar(50) NOT NULL,
`middle_name` varchar(50) NOT NULL,
`last_name` varchar(50) NOT NULL,
`gender` tinyint(1) NOT NULL,
`locale` varchar(5) NOT NULL,
`link` varchar(255) NOT NULL,
`username` varchar(50) NOT NULL,
`email` varchar(255) NOT NULL,
`picture` varchar(255) NOT NULL,
`friends` text NOT NULL,
`created` datetime NOT NULL,
`updated` datetime NOT NULL,
PRIMARY KEY (`uid`)
) ENGINE=InnoDB DEFAULT CHARSET=latin1;
It's empty right now...
Apache 2.0.64
MySQL 5.5.9
PHP 5.2.17 & 5.3.5
APC 3.1.7
eAccelerator 0.9.6.1
XCache 1.2.2 & 1.3.1
phpMyAdmin 3.3.9.2
Zend Optimizer 3.3.9
SQLiteManager 1.2.4
Freetype 2.4.4
t1lib 5.1.2
curl 7.21.3
jpeg 8c
libpng-1.5.0
gd 2.0.34
libxml 2.7.6
libxslt 1.1.26
gettext 0.18.1.1
libidn 1.17
iconv 1.13
mcrypt 2.5.8
YAZ 4.0.1 & PHP/YAZ 1.0.14
I tried to give as much info as possible, if you need more let me know...

I discovered my problem was uid seems to be a built in global or something and was filling in that data field with a bunch of letters and number, like the device id. Because of the letters flex was throwing a fit. So if you're using Facebook API in flex be sure to not go with uid for the user id, which is was facebook api calls it.

Error when refreshing WEBI report with Universe Connection Type "SSO"

Hi Experts:
We are trying to refresh the Webi report in Infoview with Universe Connection set as "Use Single Sign On when refreshing the report at view time", so that we can leverage SAP OLAP authorization variable from Bex Query which the Universe is built on.
However got the error of "incomplete logon data" after all the configurations done following below blogs:
SNC Part 1
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-1-of-2
SNC Part 2
/people/ingo.hilgefort/blog/2009/07/03/businessobjects-enterprise-and-client-side-snc-part-2-of-2
We already have Win AD SSO to SAP setup, and in BO CMC, Win AD user is mapped to SAP user ID.
The SNC settings are:
- AD Account: service.test.bobj (all lower-letters)
- 32-bit gsslib on the BO server, and 64 bit on the BW server side.
- SNC0: p:service.test.bobj at DOMAIN
- SU01 --> BO_Service ; SNC: p:service.test.bobj at DOMAIN
- Entitlement system tab --> username: BO_Service
SNC Name: p:service.test.bobj at DOMAIN
- SNC settings tab:
SNC Lib: c:\winnt\gsskrb5.dll
Mutual Authentication settings: p:SAPServiceBP0 at DOMAIN
In CMC, the role can be imported if "RFC activated" option unchecked in SNC0.
I found a few threads on the same topic, but they are all not answered:
SNC Client side configuration error
SNC Configuration Error: Incomplete logon Data
Can you please provide details of the solution if you have impleted a same scenario successsfully, or any thoughts to help the investigation?
Thanks in advance!
Regards,
Jonathan

Hi Ingo,
Sorry for taking so long to reply, we are trying to set up server side trust and enable SSO; but we still couldn't success.
What we did is:
1. We followed installation guide chapter 6, generate certificate and PSE, etc. All looks good.
2. Then we still have the "incomplete logon data" error when refreshing webi report after logon using Windows AD user ID.
3. Then we trace the PFC connection, the log is as below. We checked several BO notes, e.g. 1500150, 1461247.. The part bothers us is that we even don't have URI displayed in the log when system trying to use SNC, and we couldn't get more info on this which make us very difficult to diagnosis.
Can you please help? Thanks a lot!
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:46.857 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SNC. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Unable to authenticate using SNC because the URI does not meet the minimum connection requirements.
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Determining if we can connect using SSO. Calling CanAuthenticate...
Thu Mar 31 10:54:46.919 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Authentication model for SAP connectivity is SSO
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: The SAP SSO authentication process will fail because the SAP secondary credential are not properly updated and the password is blank.
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Trying to connect to SAP using this URI : occa:sap://;PROVIDER=sapbw_bapi,R3NAME=PB0,GROUP=BI_Group1,MSHOST=sapaupdb04,LANG=en,CLIENT=100,CATALOG="ZSPUM602",CUBE="ZSPUM602/ZSPUM602_Q50"
Thu Mar 31 10:54:47.013 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Calling m_pRfcWrapper->RfcOpenEx() ...
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: RfcOpenEx(...) returned 0
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: Call to m_pRfcWrapper->RfcOpenEx() took 0.141 seconds
Thu Mar 31 10:54:47.154 ThreadID<1980> SAPMODULE : SAPAuthenticationService: SAPAuthenticationService::~SAPAuthenticationService

Problems on Windows 7 Professional 64 with PHP data service

I've created a data service using PHP in a PHP Eclipse project and I'm trying to connect to it from my new Flash project. When I try to create a custom data type via the Configure Return Type dialog, "Auto detect the return type from sample data" radio button, I get the following error:
There was an error while invoking the operation. Check your operation inputs or server code and try invoking the operation again.
Reason:
Warning: mysqli::mysqli() [mysqli.mysqli]: (HY000/2003): Can't connect to MySQL server on 'localhost' (10061) in C:\Users\davidk\workspace\php-global-includes\mysqlAccess.inc.php on line 11
/0/onStatusÿÿÿÿ �SIflex.messaging.messages.ErrorMessage extendedData faultCode faultDetail faultString rootCause correlationId clientId destination messageId timestamp timeToLive headers body „m …a#0 C:\Zend\ZendServer\share\ZendFramework\library\Zend\Amf\Server.php(550): Zend_Amf_Server->_dispatch('getProductVersi...', Array, 'GetPlayData')#1 C:\Zend\ZendServer\share\ZendFramework\library\Zend\Amf\Server.php(626): Zend_Amf_Server->_handle(Object(Zend_Amf_Request_Http))#2 C:\Zend\Apache2\htdocs\play-debug\gateway.php(69): Zend_Amf_Server->handle()#3 {main} ‚UError instantiating class GetPlayData to invoke method getProductVersions: Error connecting to database server as user via password configured in config_cdna_testdb.php IE83D9958-920E-E203-54BC-E5365BD85289 I5496259E-8C36-AC89-E234-00000D37FD49 I7E8A1BD7-9D60-9329-DBFB-00001B5BE8C7 126823334100
Note that I've tested the GetPlayData class and the getProductVersions() method with some simple "unit testing" code and it works fine when I execute it directly. It just won't run when called from this dialog.
I tried to debug the gateway.php process that is used to do this connecting without much success so far.
Is Windows 7 supported for PHP data service development in this beta release? I'm using Version 4.0 build 253292

One more clue: the message from the exception shows that the global variables I'm using to configure the MySQL connection parameters are not set somehow. Maybe I need to upgrade my Zend Framework?
Nope. I upgraded to the latest Zend Framework and it still did not work. The global variables are not working. When I hard coded the connection parameters into the constructor of the GetPlayData class, then it worked fine. I just switched to using define() to create constants instead of using the globals and that worked, too.
It is as if globals set in one include file are not available in another include file. I agree that using them might be a bad programming practice of sorts, but it seems wrong to disallow / not support something that is part of the core language!
So, I don't know if this is a Windows 7 thing or just a general behavior. Globals within the same file seem to work fine still, but not from another include file.
So the answer for me is to not use these cross-include file globals in code that is going to be used from Flash Builder.

Error when refreshing web intelligence document less then every minute

Hi all,
I get the following error, when refreshing document via javascript more often then every minute:
Server Error in '/Dashboard' Application.
FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2 at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: BusinessObjects.Enterprise.OcaFramework.ManagedServiceFatalException: FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2 at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)
Source Error:
Line 121:
Line 122:                    //Session["StorageToken" + strDocId] = doc.StorageToken;
Line 123:               doc = reportEngine.OpenDocument(intDocID);
Line 124:               //doc = reportEngine.GetDocumentFromStorageToken(storageToken);
Line 125:               doc.Refresh();
Source File: c:\inetpub\wwwroot\dashboard\document.aspx.cs    Line: 123
Stack Trace:
[ManagedServiceFatalException: FatalException occured. The cause was : BusinessObjects.Enterprise.OcaFramework.Oca.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
   at BusinessObjects.Enterprise.OcaFramework.ManagedService.invoke(MethodInfo method, Object[] args, IDictionary context)]
   BusinessObjects.ReportEngine.WI.Internal.Server.OCCA._WICDZProxy.initInstance(Byte[] p0, UTF8StringHolder p1)
   BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerStub.InitInstance(String clientInfo, Int32& returnCode)
[CommunicationException: The Web Intelligence server could not be reached. Contact your Business Objects administrator. (Error: RWI 00236)]
   BusinessObjects.ReportEngine.WI.Internal.Server.OCCA.OCCAServerStub.InitInstance(String clientInfo, Int32& returnCode)
   BusinessObjects.ReportEngine.WI.Internal.Server.ServerCaller.InitInstance(String clientInfo)
   BusinessObjects.ReportEngine.WI.Internal.WIDocumentInstance..ctor(WIReportEngine engine, Int32 documentId)
   BusinessObjects.ReportEngine.WI.Internal.WIReportEngine.OpenDocument(Int32 documentId)
   Dashboard.document.Page_Load(Object sender, EventArgs e) in c:\inetpub\wwwroot\dashboard\document.aspx.cs:123
   System.Web.UI.Control.OnLoad(EventArgs e)
   System.Web.UI.Control.LoadRecursive()
   System.Web.UI.Page.ProcessRequestMain()
Version Information: Microsoft .NET Framework Version:1.1.4322.2407; ASP.NET Version:1.1.4322.2407
I searched forum and google for this error, but I didn't find anything. Did you heard of this error? How can I fix it?
My BO Version is BusinessObjects Enterprise XI (without any ServicePacks). Is there a SP which fix this error?
Thank you for every idea!!!

Hi,
Copy File from Client system to server in same folder location .
Make sure in Edit Query option Editable & Refreshable options are checked .
Please check the links below .
Webi Excel Personal Data Provider Dynamic Data
How to create a webi report using excel as source
Excel as datasource in Infoview
Excel source located in Infoview

Errors when compiling the web service (SAP Web Service Design Tool)

After downloading and installing the SAP de Web Service Design Tool (for Crystal Reports Server) I created a connection, a simple query and was able to deploy a web services. I tested the web service with an Xcelsius dashboard within InfoView. Thereafter I created a second connection (other name but same ODBC connection / server) and created another simple query with two date(range) parameters and a group by year and month function in order to do a select count(). It executes fine, but when I try to publish the web service I get an error.
There are errors when compiling the web service.
Is does not say whatu2019s wrong or how I can solve this problem.
Who can help me?
Some notes:
1) Within expert mode I used a MONTH() SQL function which does not show in the normal mode.
2) It seams that the u2018administrationu2019 of Web Service Design Tool got u2018corruptedu2019 after only creating the two connections, queries and services mentioned above. I believe so because I could select one of two queries when I created the second service, but within the current connection I had only one query.
Thanks for any help,
Ron
ADDITIONAL INFO: The parameters seam to be the problem. After removing the parameters I can publish the service. But without parameters it is NO SOLOTION.
Edited by: RonKoudijs on Aug 26, 2010 6:28 PM

Hello Taylan,
I think the error that you received was due to packaging issues.I placed the
UtilClass.java file under a directory called data which was present under
the project directory.
When you want to access a java class, you can either place the compiled
class file in the WEB-INF/classes folder or you can place the java file
under the project directory.
I have attached the sample project that I created with your files.
Let me know if you have any other questions.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"taylan" <[email protected]> wrote in message
news:3d6351b0$[email protected]..
>
I am trying to write a simpe web service in WebLogic Workshop, but havingan error
which I could not understand. Could you please help me? Thanks in advance.
Regards,
Taylan
My web service code is like belows:
import weblogic.jws.control.JwsContext;
import data.*;
public class WebService1
/** @jws:context */
JwsContext context;
* @jws:operation
public UtilClass testType(UtilClass tTest){
UtilClass returnObj=new UtilClass();
if(tTest.getName()!= null){
returnObj.setName(tTest.getName());
return returnObj;
and my UtilClass is placed in the data directory under the same directorywith
my web service code. It is a simpe class as belows:
package data;
public class UtilClass
private String name;
public void setName(String name){
this.name=name;
public String getName(){
return name;
However I got an error when I try to compile the webservice class. Theerror is
like belows:
File Line Message
WebService1.jws 0 Resource found on system classpath: data.UtilClass
Build complete - 1 error(s), 0 warning(s)
[ngroup.zip]

Using PHP Data Services to create an object and accessing that objects data in an unbound way in AS

Hello,
I've been able to use the php data services and bind the results of a function to a component. However I am having a hard time figuring out the syntax to use the data services to create an object out of the results, and then use that object as an array of filenames to provide the current index of the filename to a new sound object.
My problem is obviously in not being able to figure out the specific syntax, I have declared the service and and object of the services returned type and in the creationComplete() function I have assigned object.token = service.getData();
I've tried various ways of then pulling that data out of the object, with no success.
Can someone point me in the right direction?
This code probably looks horrible because it doesn't work yet.
- Joel
            import flash.media.Sound;
            import flash.media.SoundChannel;
            import mx.controls.Alert;
            var playing:Sound = new Sound();
            var channel:SoundChannel = new SoundChannel();
            var sndIndex:int=0;
            var skpTr:String;
            public function init():void{
             mp3Array.token = mp3service.getData();
             currentTrack(mp3Array.lastResult.filename);
                 trace(mp3Array.lastResult.filename[sndIndex]);
            public function currentTrack(t:String):void{
                playing = new Sound();
                playing.load(new URLRequest("mp3/" +t));
            public function skip():void{
                stop();
                if (sndIndex != mp3Array.lastResult.length-1){
                    sndIndex++;
                    var skipTr:String=mp3Array.lastResult.filename[sndIndex].data;
                    currentTrack(skipTr);
                    play();
                } else {
                    sndIndex=0;
                    skipTr=mp3Array.lastResult.filename[sndIndex].data;
                    currentTrack(skipTr);
                    play();
            public function stop():void{
                channel.stop();
            public function play():void{
                channel = playing.play();
    <fx:Declarations>
        <s:CallResponder id="mp3Array"/>
        <mp3services:Mp3Service id="mp3service" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
        
    </fx:Declarations>

Hello Joel;
In retrieving your data - what is your php returning to FB, an object, object array, an array? Either way, I have a brief example below that an object(s) is being returned. Pull the data from the lastResult in a ResultEvent. The object instantiated in the resultEvent will contain your data and you can do what you want from there.
Also, I always use Network Monitor to see what data (if any) is being returned from the server, you can also see how it is being sent back.
John
private function init():void
     mp3Array.token = mp3service.getData();
     mp3Array.addEventListener(FaultEvent.FAULT, faultHandler);
     mp3Array.addEventListener(ResultEvent.RESULT, mp3Array_resultHandler);
protected function faultHandler(event:FaultEvent):void
     Alert.show("There was a fault error!" + event.message, "Fault Error", Alert.OK);
protected function mp3Array_resultHandler(event:ResultEvent):void
     // Not sure if your service is sending back an object or an array or ?
    var info:Object = mp3Array.lastResult;
     doSomeFunction(info)
protected function doSomeFunction(data:Object):void
     trace(info.filename);

Error when querying REST web services from web-based InfoPath form 2013 environment

Error when querying REST web services from web-based InfoPath form 2013 environment, we are trying to consume REST web service in InfoPath form ( SharePoint 2013 version)
http://spapp/sites/litigation/Intake/_api/web/lists/getbytitle('Email%20Profiles')/items(1)
it works in preview but does not when it is published. because of claim based authentication i m getting below error
The form cannot run specified query, the underlying connection was closed. An expected error occurred
same works in 2010 environment .. are we missing anything in 2013 servers?? please let me know how we can resolve it.. thank you
guru

everyone face this issue, nothing in event viewer, its easy to reproduce error at ur end also..
just you need to use below web service in infopath and populate some data on form load like id = 1 pull the title and try to set in form any field...the
list has one item thats all
guru

JCS-122017 Error When refreshing Application List

JCS-122017 Error When refreshing Application List
This issue started occurring when we migrated CPS from M28 to M33
We currently have M33.45 in Dev and are still experiencing the same error when refreshing the application list.
To replicate the issue, I can login, click applications, click the redwood folder, then click the refresh button within CPS and receive the below error.
[Errors found]      11:35:27 AM: JCS-122017: Trying to use non-attached object Application:2,472
Has anyone else had this issue, this appears to happen to all of the application lists when refreshing
JCS-122017: Trying to use non-attached object Application:2,472
     at com.redwood.scheduler.model.BaseSchedulerEntityImpl.checkHasSession(BaseSchedulerEntityImpl.java:853)
     at com.redwood.scheduler.model.BaseSchedulerEntityImpl.checkCanRead(BaseSchedulerEntityImpl.java:859)
     at com.redwood.scheduler.model.NamedRootObjectImpl.getName(NamedRootObjectImpl.java:143)
     at com.redwood.scheduler.ui.meta.page.MetaOverviewPage.getTabName(MetaOverviewPage.java:227)
     at com.redwood.scheduler.ui.meta.page.MetaTabPage.setTabPageNameType(MetaTabPage.java:94)
     at com.redwood.scheduler.ui.meta.MetaTabPageSetNameAction.performModelAction(MetaTabPageSetNameAction.java:49)
     at com.redwood.scheduler.ui.meta.MetaModelAction$ModelActionImpl.performModelAction(MetaModelAction.java:62)
     at com.redwood.scheduler.ui.model.impl.FormImpl.modelActions(FormImpl.java:730)
     at com.redwood.scheduler.ui.model.impl.LifeCycle.run(LifeCycle.java:226)
     at com.redwood.scheduler.ui.servlet.Servlet.handleRequest(Servlet.java:98)
     at com.redwood.scheduler.ui.servlet.Servlet.doPost(Servlet.java:54)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.runServlet(FilterChainImpl.java:117)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:62)
     at com.redwood.scheduler.module.impl.ModuleFilter.doFilter(ModuleFilter.java:157)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.redwood.scheduler.security.filter.SecurityFilter.doFilter(SecurityFilter.java:613)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.redwood.scheduler.servlet.RequestCharsetFilter.doFilter(RequestCharsetFilter.java:197)
     at com.sap.engine.services.servlets_jsp.server.runtime.FilterChainImpl.doFilter(FilterChainImpl.java:58)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:384)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
The error is in the admin guide
No timezone could be found to calculate this TimeWindowElement. This means
that the object that includes the TimeWindow should set the TimeZone to use
for the calculation of the TimeWindow, or a TimeZone must be set on the
TimeWindow or TimeWindowElement.
I do not see how this would occur within the application list.
Thanks,
Edited by: Nick Katsoulis on Jan 17, 2012 6:39 PM

Hi Nick,
I think you have already received this info via OSS - In case anyone else encounters this same problem - This issue will be fixed in a future version of CPS, planned for the M33-April release.
David

P3 Project Manager Crashing with EBDClient error, when refreshing (F5)

My company has 3 sql databases for Prima on a server; 2 are approximately 1.5GB, and the third is just over 2GB
We have 5 client machines (xp sp3 32bit), that use the following setup:
P3 Project Manager version 5 (no service packs installed, but have tried sp1-3 on my machine with the same error)
oracle client 9.2 with tnsnames pointing to the sql server with the prima databases
each machine has 2GB memory with a 3-4GB pagefile
I do not have issues refreshing the other smaller databases.
both the client and server do not take a significant hit on resources while refreshing.
both the server and client are not reporting any errors under event viewer.
they all receive the following error when refreshing (F5) while logged in the third and largest database:
Message (Tab)
Application exception
type: EDBClient
Event code: IMFTO-3501-8
Description: Insufficient memory for this operation
Context (tab)
app title: primavera project management
exe: pm.exe
object: tmainmenu
context:
     1. tfrmmain.refreshVDBengine
     2. tfrmmain.actrefreshExecute
     3. tfrmmain.actProjectActivitiesExecute
     4. tfrmmain.actProjectsExecute
     5. tfrmmain.actProjectsActivitiesExecute
     6. tfrmmain.actProjectWBSExecute
     7. tfrmmain.actProjectActivitiesExecute
Evironment (tab)
Components
=============
ORI: ORI Win32 #
ORI/DB: PMDB,0500.0024.0001.0002
IMG: IMG win32 #1000
SYS INFO
=============
username: "user's name" Hostname: "their computer name"
OS version:     winNT 5.1, build 2600, SP3

...\OracleBI\web\catalogmanager\catalogmanager.ini
-vmargs
-Xmx1024M
-Djava.library.path=E:\OracleBI\web\bin
-Declipse.noRegistryCache=true
amend---------------------------------------------------------
-vmargs
-Xmx512M
-Djava.library.path=E:\OracleBI\web\bin
-Declipse.noRegistryCache=true

Error when updating the data from DSO to cube

Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
Annie

Hi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha

RFC error when sending logon data

Hi;
We cannot configure the STMS of our development system. When we try to
configure it, system gives an error message: Errors during distribution
of tp configuration; TMS Alert Viewers tells us
RFC_COMMUNICATION_FAILURE: RFC communications error with
system/destination TMSADM-FKT.DOMAIN_FKT RFC error when sending logon
data and READ_PROFILE_FAILED:File
erptest\sapmnt\trans\bin\TPPARAM
could not be opened for reading (No such file or directory).
Is there any advise for solution?
Best regards
Noyan
PS: Please find the profiles below:
START:
#.*       Start profile START_DVEBMGS00_erptest                                                                                *
#.*       Version                 = 000006                                                                                *
#.*       Generated by user = BASIS                                                                                *
#.*       Generated on = 30.12.2010 , 15:40:55                                                                                *
generated by R3SETUP
SAPSYSTEMNAME = FKT
INSTANCE_NAME = DVEBMGS00
SAPSYSTEM = 00
SAPGLOBALHOST = erptest
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
start database
#_DB = strdbs.cmd
#Start_Program_02 = immediate $(DIR_EXECUTABLE)\$(_DB) FKT
start message server
#_MS = msg_server.exe
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start IGS
Start_Program_05 = local $(DIR_EXECUTABLE)$(DIR_SEP)igswd$(FT_EXE) -mode=profile pf=$(DIR_PROFILE)$(DIR_SEP)FKT_DVEBMGS00_erptest
start application server
#_DW = disp+work.exe
#Start_Program_04 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS
General parameters for starting the system
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPSYSTEM = 00
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPSYSTEMNAME = FKT
#parameter created                          by: BASIS        24.12.2007 23:53:27
#INSTANCE_NAME = DVEBMGS00
#parameter created                          by: BASIS        24.12.2007 23:53:27
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
#parameter created                          by: BASIS        24.12.2007 23:53:27
#SAPGLOBALHOST = erptest
Start database
#parameter created                          by: BASIS        24.12.2007 23:53:27
_DB = strdbs.cmd
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_01 = immediate $(DIR_EXECUTABLE)\$(_DB) $(SAPSYSTEMNAME)
Start message server
#parameter created                          by: BASIS        24.12.2007 23:53:27
MS = msgserver.exe
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_02 = local $(DIR_EXECUTABLE)\$(_MS) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
Start applications server
#parameter created                          by: BASIS        24.12.2007 23:53:27
_DW = disp+work.exe
#parameter created                          by: BASIS        24.12.2007 23:53:27
Start_Program_03 = local $(DIR_EXECUTABLE)\$(_DW) pf=$(DIR_PROFILE)\FKT_DVEBMGS00_erptest
DEFAULT:
SAPDBHOST = ERPTEST
dbms/type = mss
dbs/mss/server = ERPTEST
dbs/mss/dbname = FKT
dbs/mss/schema = fkt
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPFQDN = tr.delta.is
SAPLOCALHOSTFULL = $(SAPLOCALHOST).$(SAPFQDN)
SAPDBHOST = erptest
SAPTRANSHOST = erptest
DIR_TRANS =
$(SAPTRANSHOST)\sapmnt\trans
#DIR_TRANS = D:\usr\sap\trans
DIR_PROFILE = D:\usr\sap\FKT\SYS\profile
SAP Message Server for ABAP
rdisp/mshost = erptest
rdisp/sna_gateway = erptest
rdisp/sna_gw_service = sapgw00
rdisp/vbname = erptest_FKT_00
rdisp/enqname = erptest_FKT_00
rdisp/btcname = erptest_FKT_00
rdisp/msserv = sapmsFKT
rdisp/msserv_internal = 3900
rdisp/bufrefmode = sendoff,exeauto
login/system_client = 200
#GUVENLIK PARAMETRELERI
login/password_expiration_time = 90
login/min_password_lng = 6
#parameter created                          by: BASIS        25.03.2004 08:41:25
rdisp/gui_auto_logout = 10800
#parameter created                          by: BASIS        25.03.2004 08:37:47
#old_value: 3                                 changed: BASIS 25.03.2004 08:42:38
login/fails_to_user_lock = 6
#validasyon geregi, g#venligi artirma ama#i - check active but no check for SRF
#parameter created                          by: BASIS        16.06.2007 17:35:41
#old_value: 2
#changed: BASIS         14.05.2008 15:24:55
auth/rfc_authority_check = 1
#otomatik unlocki iptal eder
#parameter created                          by: BASIS        10.11.2006 17:47:15
login/failed_user_auto_unlock = 0
#AUDIT PARAMETRELER?
#old_value:                                   changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_day = 1996800000
#old_value: 1000000000                        changed: BASIS 20.04.2005 17:17:01
#old_value: 0                                 changed: BASIS 20.04.2005 17:19:12
rsau/max_diskspace/local = 2048000000
#old_value: 2000000000                        changed: BASIS 28.03.2005 23:17:11
#old_value: 2                                 changed: BASIS 29.03.2005 12:09:14
#old_value: 0                                 changed: BASIS 20.04.2005 17:13:37
rsau/max_diskspace/per_file = 665600000
rsau/enable = 1
rsau/local/file = D:\usr\sap\FKT\DVEBMGS00\log\++++++++######..AUD
rsau/selection_slots = 12
#rec/client = ALL
DIR_AUDIT = D:\usr\sap\FKT\DVEBMGS00\log
FN_AUDIT = ++++++++######..AUD
#DIL PARAMETRELERI
#Turkish codepage settings
abap/import_char_conversion = 0
install/codepage/db/non_transp = 1610
install/codepage/db/transp = 1610
zcsa/installed_languages = DET
#zcsa/system_language = E
zcsa/system_language = T
zcsa/second_language = E
install/codepage/appl_server = 1610
#OS dependent
abap/locale_ctype = Turkish_turkey.28599
#DIR_PUT = D:\usr\sap\FKQ\upg\abap
   *** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/msserv_internal = 3900
#system/type = ABAP
INSTANCE:
SAPSYSTEMNAME = FKT
SAPGLOBALHOST = erptest
SAPSYSTEM = 00
INSTANCE_NAME = DVEBMGS00
DIR_CT_RUN = $(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64
DIR_EXECUTABLE = $(DIR_INSTANCE)\exe
icm/server_port_0 = PROT=HTTP,PORT=80$$
SAP Message Server parameters are set in the DEFAULT.PFL
ms/server_port_0 = PROT=HTTP,PORT=81$$
#rdisp/wp_no_dia = 10
#rdisp/wp_no_btc = 3
#rdisp/wp_no_enq = 1
#rdisp/wp_no_vb = 1
#rdisp/wp_no_vb2 = 1
#disp/wp_no_spo = 1
rdisp/wp_no_dia = 12
rdisp/wp_no_vb = 3
rdisp/wp_no_vb2 = 0
rdisp/wp_no_enq = 1
rdisp/wp_no_btc = 3
rdisp/wp_no_spo = 1
#PERFORMANS PARAMETRELERI
#parameter created                          by: SAP*         08.08.2001 10:30:18
abap/fieldexit = yes
#parameter created                          by: ALPER        13.10.2000 18:24:16
install/collate/active = 1
rdisp/max_wprun_time = 25000
MEMORY_NO_MORE_PAGING dump nedeniyle
#parameter created                          by: BASIS        27.12.2006 17:00:22
rdisp/PG_MAXFS = 262144
abap/heap_area_nondia = 2000000000
rdisp/PG_SHM = 16384
rdisp/ROLL_SHM = 32768
#'STORAGE_PARAMETERS_WRONG_SET' or 'TSV_TNEW_PAGE_ALLOC_FAILED'
#Note 552209 - Maximum memory utilization for processes on NT/Win2000
#parameter created                          by: BASIS        30.10.2007 10:57:24
#abap/heap_area_nondia = 50000
#parameter created                          by: BASIS        30.10.2007 10:58:54
#rdisp/PG_SHM = 0
#parameter created                          by: BASIS        30.10.2007 10:58:27
#rdisp/ROLL_SHM = 625
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:49:57
dbs/mss/stats_on = 1
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:49:33
dbs/oledb/stats_on = 1
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:48:23
dbs/oledb/add_procs = 8
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:47:29
rsdb/esm/max_objects = 2000
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:47:03
rsdb/otr/buffersize_kb = 4096
#EWA report 12.2007
#parameter created                          by: BASIS        03.01.2008 19:46:21
rsdb/esm/buffersize_kb = 4096
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:18:14
ztta/parameter_area = 16000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:43
enque/table_size = 10000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:20
gw/max_sys = 2000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:16:01
gw/max_overflow_size = 25000000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:15:19
rdisp/max_comm_entries = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:14:48
rdisp/tm_max_no = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:14:20
gw/max_conn = 2000
Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:13:42
rdisp/max_arq = 2000
#Eyl#l 2006 EWA raporu
#parameter created                          by: BASIS        24.11.2006 13:12:57
ztta/roll_area = 3500000
#parameter created                          by: BASIS        18.05.2005 09:20:25
#old_value: 90                                changed: BASIS 18.05.2005 09:22:25
rdisp/max_hold_time = 300
#parameter created                          by: BASIS        20.08.2003 12:10:20
#old_value: 6144
#changed: BASIS         03.01.2008 19:42:10
rsdb/obj/buffersize = 20000
#parameter created                          by: BASIS        20.08.2003 12:09:48
#old_value: 6000
#changed: BASIS         03.01.2008 19:42:59
rsdb/obj/max_objects = 20000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:42:11
#old_value: 250000
#changed: BASIS         30.10.2007 10:56:17
#abap/buffersize = 100000
#changed: BASIS         03.01.2008 19:40:36
#abap/buffersize = 300000
#by: BASIS 12.06.2008
abap/buffersize = 400000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:41:32
#zcsa/presentation_buffer_area = 20000000
#64 bite gectikten sonra   by: BASIS 10.06.2008
zcsa/presentation_buffer_area = 30000768
note 103747
#parameter created                          by: BASIS        08.07.2003 20:40:55
rsdb/ntab/ftabsize = 30000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:40:12
rtbb/max_tables = 500
note 103747
#parameter created                          by: BASIS        08.07.2003 20:39:15
#old_value: 20000
#changed: BASIS         03.01.2008 19:41:29
#rtbb/buffer_length = 30000
#64 bite gectikten sonra by: BASIS 10.06.2008
rtbb/buffer_length = 50000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:38:26
zcsa/db_max_buftab = 10000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:37:37
#zcsa/table_buffer_area = 50000000
#64 bite gectikten sonra   by: BASIS 10.06.2008
#zcsa/table_buffer_area = 89000000
by: BASIS 12.06.08
zcsa/table_buffer_area = 99000000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:36:54
sap/bufdir_entries = 10000
note 103747
#parameter created                          by: BASIS        08.07.2003 20:36:12
rsdb/cua/buffersize = 8000
#note 103747
#parameter created                          by: BASIS        08.07.2003 20:34:46
#old_value: 5000                              changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/sntabsize = 5500
#parameter created                          by: BASIS        08.07.2003 20:33:56
#note 103747
#old_value: 10607                             changed: BASIS 08.07.2003 20:34:58
#old_value: 10000                             changed: BASIS 08.07.2003 20:35:39
rsdb/ntab/irbdsize = 11000
#note 103747
#parameter created                          by: BASIS        08.07.2003 20:32:18
rsdb/ntab/entrycount = 40000
#old_value: 2076                              changed: BASIS 28.06.2005 19:36:21
#old_value: 5735                              changed: BASIS 28.06.2005 19:40:01
PHYS_MEMSIZE = 4096
#64 bite gectikten sonra   by: BASIS 10.06.2008
abap/heaplimit = 40894464
abap/heap_area_total = 2000683008
ztta/roll_extension = 2000683008
em/blocksize_KB = 4096
   *** UPGRADE EXTENSIONS (RELEASE "701") ***
#rdisp/elem_per_queue = 2000
#auth/auth_number_in_userbuffer = 9000
#snc/enable = 0

Hi Srikishan;
You are right. The problem was releated with secstore. I found a SAP note ( Note 1532825 - Deleting SECSTORE entries during system export/system copy). I created the program which ise mentioned in the note and than run it. After that everything seems ok now.
Thanks for your help and interest
Best regards
Noyan

Error when refreshing workbook in BEx: Specific Macro CallBack not found

One of our users is getting the following error when refreshing any BEx workbook (in BI7):
Problems while calling the exit on refresh: Specified Macro 'CallBack' is not found in the workbook
This error suddenly started this week, everything was fine before that, and no changes have been made to the user's PC. The problem is specific to this one user's PC.
Any ideas?
-Jason

Hi,
It seems a common error.
There is a note that mentions the error, and was fixed since BI addons SP 8
Note: 1267942 - Custom macro not being executed on a workbook
Download and test the latest version: bi710sp12_1200-10004472.exe
This should fix the issue.
FYI: SAPGUI 640 is not supported by SAP since 2008. If you are using this version, please download the SAPGUI 7.10 as well.
Thanks
Edward John

Tutorial: Flash Builder 4 beta 2 and PHP Data/Services for beginners

Hi fellas,
I've written this tutorial for total beginners to get quickly to FB4 and PHP. Comments welcome
Flash Builder 4 and PHP Data/Services for beginners
http://www.flashrealtime.com/flash-builder-4-and-php-data-services/

Hi,
The first issue will be the pathing differences between wamp/mamp/xampp, some use www as root others htdoc you need to setup the php services on your local machine rather than importing a project.
The created services will have a connection array declared at the top of the code that points to the mysql server, in the project default debug folder you will have the config file that has the zend and webserver path
top of service file
============
var $username = "root";
var $password = "";
var $server = "localhost";
var $port = "3306";
var $databasename = "zend";
var $tablename = "clients";
var $connection;
amfconfig.ini
=========
[zend]
;set the absolute location path of webroot directory, example:
;Windows: C:\apache\www
;MAC/UNIX: /user/apache/www
webroot =C:/wamp/www
;set the absolute location path of zend installation directory, example:
;Windows: C:\apache\PHPFrameworks\ZendFramework\library
;MAC/UNIX: /user/apache/PHPFrameworks/ZendFramework/library
;zend_path =
[zendamf]
amf.production = false
amf.directories[]=Zender-debug/services
In your main project folder you have a .model folder the file there is an *.fml file that contains your channel endpoints etc.
David.

Refreshjob error when refreshing php data/services

Similar Messages

Maybe you are looking for