Refrigerator is cheaper. How to go about it.

Hello all. First of all thank you for reading my post. I have a refrigerator that I would like to purchase. My father just bought one and I want the same model. I have looked on Bestbuy.com and found the particular model but it is more expensive than it is at homedepot. None of the nearby Bestbuys seem to have it in stock according to the website. So I have three questions:::
1) Can I order it online and take advantage of the price match or do I have to go into the store?
2) Is it easy enough to have the rewards points added to my rewards zone card if ordered online?
3) Can I take advantage of the no interest financing if I order online and use the bestbuy card that I already have?

To answer your questions in order:  1) No ( .com)  will not price match other retailers   2) Yes  3) If online is offering that (699.00 and up)  and the price is within the guidelines, then yes.

Similar Messages

  • Someone used my email address to create an apple id. I changed the password because it is freaking me out. I want to report it to Apple but dont know how to go about it. I want the Apple ID deleted. How do I go about that?

    Someone used my email address to create an Apple ID. I logged in to appleid.apple.com and I changed the password because it is freaking me out. I want to report it to Apple but dont know how to go about it. I want the Apple ID deleted. How do I go about that? Is there also a way to ensure that the email address wont be used again by this person to create another Apple ID?
    This is compounded actually by a Gmail issue. I have had this email address for ages, since the start of the beta. But lately in the last year or so, I am getting mail that seems to be intended for other people but it is using my email address. It is probably one of them who created the Apple ID.

    Contact iTunes support: https://getsupport.apple.com/Issues.action

  • Does anyone know of a VI or how to go about writing one that will prevent the computers time/date from being disabled while an application is running.

    Does anyone know of a VI or how to go about writing one that will prevent the computers clock/time from being disabled while an application is running. The time and date can normally be reset while an application is running by clicking on the time/date in the lower right-hand corner of the computer screen. I have an application that runs over several days and it is critical that the time and date of the computer not be changed. Is there an easy way to lock this out from the user? Note that I am what I consider an advanced beginner in LV.
    Thank you,
    Chuck
    Solved!
    Go to Solution.

    That is not something you can do from LabVIEW, as it is an operating system operation, and it will depend on the operating system that you're using. On Windows you can use a group policy to control this. Please Google on "prevent time and date change in windows".
    Also, please try to refrain from stuffing your entire message in the subject block. Keep the subject short, but descriptive enough so it can be understood what you are basically asking. Thanks.

  • My ipod touch 4th generation no longer holds it's charge for more than 40mins,needs new internal battery but I have no idea how to go about this. i love my ipod and don't want it to loose power completely, can anyone help?

    My ipod touch 4th generation no longer holds it's charge for more than 40mins from full power, think it needs a new internal battery but have no idea how to go about this and am no longer covered by my guarantee. Can anyone advise me on what's best? Thanks in advance

    Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
    Use an Apple wall-mount charger.  Do NOT use a computer's USB port.  Then, operate it normally until auto shut-down (ignore any low level alerts that may appear).  An irony is that doing that test to determine the total operating time is also the exact procedure necessary to calibrate the battery level meter.
    I'm not claiming that you do not have a problem.  I am stating, however, that we don't yet know whether or not a battery problem exists.
    According to Apple:
    Use Your iPod Regularly
    For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
    Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

  • I had to restore my iPod because I forgot the password, like how santa forgot about me. And I didn't set up a Backup. SO I sort of lost everything. But I'm wondering if I can somehow get my pictures back from somewhere. PLEASE HELP ME. Thanks

    I had to restore my iPod because I forgot the password, like how santa forgot about me. And I didn't set up a Backup. SO I sort of lost everything. But I'm wondering if I can somehow get my pictures back from somewhere. PLEASE HELP ME. Thanks

    - If you used PhotoStream then try getting some of them from your PhotoStream. See that topic of:
    iOS: Importing personal photos and videos from iOS devices to your computer
    - Maybe from the restored iPod via
    How to perform iPad recovery for photos, videos
    Wondershare Dr.Fone for iOS: iPhone Data Recovery - Wondershare Official     
    http://www.amacsoft.com/ipod-data-recovery.html

  • Where can I get help with partitioning my hard drive? I have a "non-genuine" version of windows that I need to replace but I have not a clue how to go about doing that.

    I love my mac, but I unfortunately have to also run windows because of engineering software. I bought windows 7 at my campus computre store and one year later my computer is telling me that my software is "non-genuine." I need to fix this asap, but my computer store refuses to do anything because a year has passed. Microsoft wont help because I have a Mac.
    My question is, where can I go to find someone who can help me uninstall the "non-genuine" windows 7 and replace it with a functional one?
    Im allowed a free download of windows 7 because I'm still a student, but I have no clue how to go about uninstalling and reinstalling windows.
    Thanks a bunch.

    Hello,
    This kind of question is best asked in the Windows Forums, however I've had some succession with a similar issue myself.
    Non-Genuine Windows means that it can't authenticate your copy of Windows.
    It's not a problem, all your need is a genuine product key code. Provided you don't have different version of Windows 7 installed to the one you are buying (for example windows 7 Home Premium and Windows 7 business) Then you can use the new key code.
    Click on the Start Button and type: CMD (into the 'Search programs and files' field in the Start Menu)
    The Start Menu will show 'CMD.exe', 
    Right-click the CMD.exe file and select Run As Administrator.
    In the CMD window, type: slmgr.vbs -ipk <type your product key here>
    To activate windows after changing the key, type: slmgr.vbs -ato
    It should now accept the new key code and you will need to be connected to the Internet to authenticate.
    If by chance the windows 7 types are different (One is Home premium say and the other is Business) then you will need to uninstall that copy of Windows 7 and install the new one. If your using BootCamp then you will need to go into BootCamp under system preferences and remove that copy of Windows (delete it)
    Then create a new setup with your new Windows 7 disk.
    For me I had the same type of windows, changing the product code worked. Saved me the bother of having to reinstall Windows again and it was all genuine.
    Best of luck

  • I bought CS6 extended yesterday (yes i did). I have CS4 and lots of photo's in bridge (tagged with keywords). What is the best way to get my photos from bridge cs4 to cs6? Is there a guideline how to go about so I don't loose any of my photos/keywords? Wh

    I bought CS6 extended yesterday (yes i did). I have CS4 and lots of photo's in bridge (tagged with keywords). What is the best way to get my photos from bridge cs4 to cs6? Is there a guideline how to go about: so I don't loose any of my photos/keywords? Who can help?

    The Bridge General Discussion can give you the specifics of transferring your information over to Bridge CS6.

  • Need guidance on how to go about creating such a program...

    Hello
    I am working on a bonus project for one of my courses. However, I am a bit lost.... I just dont know how to go about doing it. I mean, I have some ideas but I am SURE there is a more elegant way of doing it.
    Option 1
    1) Design a visual tool that will allow the user to interactively create a syntax graph.
    2) The tool will then convert the syntax graph to Extended BNF
    Option 2
    1) Design a tool to read Extended BNF grammar and convert it into syntax graph.
    I am leaning on doing Option 2.... any insights will be much appreciated.

    Hi Ade,
    1. First off SHTEST and SHDISC schemas should reside on the same database. 2. You have to create end user layer in your SHDISC schema (you should give the rights required) using Discoverer Administrator tool. EUL tables get created in SHDISC schema.
    3. Using Discoverer Administrator you need to pull the structures from SHTEST. Once you open your Discoverer Administrator, you will see a little window with "Administration Tasklist".
    Anyways, the best place to get information related to this is from Discoverer Administration Guide. Then you might want to checkout the details on reporting tool Discoverer Plus/Discoverer Viewer or Discoverer Desktop based on what you choose for building your reports.
    Hope this helps,
    -Esther

  • How to go about capacity planning for storage ?

    Hi Experts,
    How to go about Capacity Planning? For  instance if clients wants to upgrade to new server and new storage and asks us how much additional storage do you need for next 5 years, how can calculate the amount of storage.
    I don't have any baseline info about the server of past years. Where can I start and any scripts you guys use for doing capacity planning?
    Appreciate your help.
    Thank you.
    Sam

    Please see this link:
    SQLAuthority News – Storage and SQL Server Capacity Planning and configuration...
    T-SQL Articles
    T-SQL e-book by TechNet Wiki Community
    T-SQL blog

  • How to go about multiple inclination with different data selection in Delta

    We have to copy large amount of data ( more than 42lak of recodes) selectivly from on ODS to other ODS. in delata load ( BW 3.5 enverioment)
    I thought of loading data in slices through delta loading with selection condition.
    step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
    step 2> Take the delta load .. it will take all delta record with same selection
    step 3> Now I want to do Initialization with selection condition as for calyear =2002
    step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
    Here what problem I am facing.. while doing 2nd time initialization it prompt me to delete the last  initialization request form scheduler menu.
    if i delete the last request .. will it take the delta  for previous initialization selection  and new initialization selection. ?
    Please advice how to go about multiple inclination with different data selection in delta loading.
    Looking forward your reply.

    Hi,
    step 1> Do The initialization with selection condition as for calyear =2001 ( Init without data transfer )
    step 2> Take the delta load .. it will take all delta record with same selection
    step 3> Now I want to do Initialization with selection condition as for calyear =2002
    step 4> take the delta now it will take delta for year 2001 and 2002 both Right ?
    You are correct with this scenario normally. The message you mentioned normally comes up when you open a infopackage and don't change the selection first or in case you have overlapping selections with an already done init.
    regards
    Siggi

  • How to go about Printer Management

    Hi all,
    PLease let me how to go about printer managemt in a huge project with 1000 users.
    We can put it in 3 phases.
    1. Requirememt Gtahering
    2. Architecture defination
    3. Implimenting it in SAP
    Well i have gone through all SAP help documents. But still I am not clear how to go about it.
    What should be the details i need to finalize architeture and how printer defination and testing should be done.
    Can anyone also provide some templates or formats for it.

    Hello Hussain..
    > 1. Requirememt Gtahering
    > 2. Architecture defination
    Planning SAP print Architecture:
    http://help.sap.com/saphelp_erp2005vp/helpdata/EN/ea/a4ef3b11a17a0ae10000000a114084/frameset.htm
    > 3. Implimenting it in SAP
    http://help.sap.com/saphelp_erp2005vp/helpdata/EN/7e/36e4c4023411d399b70000e83dd9fc/frameset.htm
    Hope this helps you..
    Cheers,
    Jazz

  • How to go about Online auditing of PM endusers with their daily transaction

    Dear friends,
    How to go about Online auditing of PM endusers with their daily transactions like Maintenence orders,Maint plans
    measuring documents.can you give provide me navigation for this
    your response is highly appriciated.
    Regards,
    Sunil

    Hi Sunil,
                  We do a similar kind of Tracking on Month-to-month basis, actually the repost is given by the Security person, which is for all the users, and then as per the User Group for all the plants we can check as which T-Code is used by which person How many no of times, by converting the same report in the Pivit Table and Chart, the IT department take the Decission as from which all user , which T-Codes needs to be removed, and if the New T-Code is assigned then the requirement comes from Business.
    I guess a Similar Report can be used by you also to check out as of which all users are using which T-Codes and that can serve your Purpose and check out for the Descipline in the users, but how can you judge on the day-to-day basis, I guess it will be helpfull if you can take a longet Period of time like monthly or atleaset Weekly.
    Hope it helps you.
    Regards,
    Yawar Khan

  • How to go about pursuing Contact Center

    Hello,
    I wish to pursue Contact Center and CVPI.
    I would like to know what are the per-requisite for these specialized voice course.
    Kindly suggest a path of different technologies needed for UCCE.
    ICM and IP IVR are separate module or are they covered in dept in CVPI or UCCE?
    Please suggest how to go about pursuing my goal. 
    Regards.

    UCCE is an umbrella solution that includes ICM (central controllers, PGs, AW, HDS) as ACD, then you have CVP as the IVR working with VXML GWs, CUCM as PBX, CUIC for reporting (or 3rd party), Finesse or CTI OS, or CAD for agent desktop, optional CUSP as SIP proxy and bunch of 3rd parties if needed for call recording, workfrce management, wallboard, etc, etc.
    ICM can also run outside of UCCE integrated with 3rd party ACDs, but this is more rare in recent years.
    HTH, please rate all useful posts.
    Chris

  • A how-To guide about splitting import files exists?

    Hi All,
    in his Webinar https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/409e4529-adbc-2a10-4d9b-e8fade570414
    Klaus David said a "A how-To guide about splitting import files exists" (Page 20).
    Can anybody tell me where to find this guide?
    Please mail to becker.roman ( at ) web . de
    Best regards
    Roman

    I found the link here, if you are still looking.
    I didnot check the contents yet but the title says
    MDM 5.5 SP06 - IT Scenario Configuration Guide -
    https://websmp202.sap-ag.de/~sapidb/011000358700001119482007E
    Thanks
    Satya

  • TS3682 i have upgraded ipad with the latest version of ios. However, while restoring backup from itunes to ipad, a password is being asked. i do not have password, how to go about?

    i have upgraded ipad with the latest version of ios. However, while restoring backup from itunes to ipad, a password is being asked. i do not have password, how to go about?

    Restore from iCloud Backup
    1. Erase all contents and settings (Settings>General>Reset>Erase all content and settings)
    2. You'll be asked twice to confirm
    3. You'll see Apple logo and progress bar
    4. You'll see a big iPad logo on screen
    5. Configuration start
    6. Set language
    7. Set country
    8. Enable Location Service
    9. Select network, enter password and join network
    10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
    11. Selected Restore from iCloud Backup

  • How to go about performance issues

    Hi Experts,
    Need help on how to get started on below situations.
    Users are complaining about queries running slow even after rebuilding indexes,updated stats,no blocking?
    How to go about troubleshooting such issues?
    Thank you.

    http://technet.microsoft.com/en-us/library/ms177500(v=sql.105).aspx
    http://redmondmag.com/articles/2013/12/11/slow-running-sql-queries.aspx
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

Maybe you are looking for