Refurb Apple Cinema Displays-US But Not UK?

Hi,
Can anybody shed any light as to why Apple sell re-furb displays in the US but not in the UK? I really fancy one but can't afford brand new, and having bought re-furb Macs before it's a pity i can't seem to buy a display. Can i get one from anywhere else?

That might be a blessing. After returning my 23" display (after 11 months) because of 11 dead pixels with 2 that touched near the center I received 3 or 4 refurbished units before I settled on the one I have now that also had 11 dead pixels but they were blue pixels instead of red and none were side by side which makes them worse. This unit was likely quite a bit older than the the new one I had originally purchased and it now has a dark band across the top that looks like oil or something liquidish is being sandwitched between layers. Buy a new one and get an extended warranty on it. If I ever buy another I will only do so if I can see it working 1st. and check for dead pixels.

Similar Messages

30 inch Apple Cinema Display-system prefs not showing native resolutions

The 30 inch Apple Cinema Display, seems to be working fine with the mac pro, but when I try to hook up the 2009 mini, the display preferences do not show the mini's native resolution of 1920x1200. The maximum it shows is 1280x800, and only gives a few other choices. This mini had once been attached to a TV monitor, so I am wondering if that has something to do with the lack of choices in the system preferences. Does anyone have any ideas on how to get the system preferences to display the correct info so that I can adjust the resolution ?
Thanks

Being compatible with the 24-inch Cinema Display and being able to use it at resolutions higher than 1280 by 800 doesn't necessarily mean that it can drive the 30-inch Cinema Display at its full resolution. You need to use a dual-link DVI connection as stated above.
(62751)

ATI Radeon 9250 / 23" Apple Cinema Display compatibility

I'm having trouble getting my video card to display properly on my 23" Apple cinema display.
My PC currently has a Diamond Multimedia ATI Radeon 9250 256MB/PCI card in it. The video card has DVI/SVGA/and TV-Out ports.
I'm able to display "ok" when I connect the Apple display to my machine via the DVI port. However, when I try to do something intensive - like watch a DVD, a lot of vertical interference bars appear across the screen. When I close the DVD, the vertical interference bars go away.
However, I'm able to watch a DVD just fine on an SVGA monitor attached to the graphics card with no interference patterns.
The video card is supposed to support DDC technology. I have the most recent drivers for the video card. I've also made sure to disable to the existing integrated Intel GMA 900 video card on the PC. The bios screen does show up on the Apple display.
Any suggestions of things to try before throwing in the towel and saying that this video card really isn't compatible with the 23" Apple cinema display?
If not, any suggestions of inexpensive ones that are?
Thanks,
John
eMachines T5010 Windows XP

This is not an uncommon problem. It's often called dancing pixels or noise/static, so you can search the topic for more info.
Some ATI video cards, with the latest ATI drivers installed, have the option to reduce DVI frequency or use alternate DVI operational mode. Check and see if your video card supports those options, and play around with them if so. Also, you can try using some third-party programs to create a new resolution profile with a refresh rate of 58 or 59Hz instead of the standard 60Hz.
If that doesn't work, I don't know what PCI card to recommend. They're all AGP or PCI Express now.

HT4293 i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

i am trying to use dual monitors when editing with FCPX. I have a macbook pro and an apple cinema display monitor. I have connected them and opened Fcpx but the option to use second monitor is not active! what do i do ? please help going bonkers!

<http://support.apple.com/kb/HT5891>
You can use USB for the Apple trackpad.
<http://www.mobeetechnology.com/the-power-bar.html>

Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!

Hi I have a recent macbook pro 12" (bought in april 2012) model number A1278. I'm trying to connect to a 23" apple cinema display (A1082) this currently is not working - i've bought an additional Apple MB570ZA Mini DisplayPort to DVI Adapter - no luck!
im not sure what to do next - can anyone help?
im running OSX 10.7.4

Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks.

20" Apple Cinema Display not recognised after upgrading to OS 10.8.2 (Mountain Lion)

20" Apple Cinema Display not recognised after upgrading to OS 10.8.2 (Mountain Lion).
Hello Apple! Anybody there? How long does your community have to wait for a solution?
The same problem has been unsolved for months now. No statements from Apple either.
I was told today to wait for 10.8.3. This might solve the issue. I can not belive my ears.
My MacBookPro 4,1, Intel Core 2 Duo with 2.5 GHz Processor and Graphics chip: NVIDIA GeForce 8600M GT, will not talk to the exter. 20" Cinema Display ( Model Number A1081 ). The screen stays black. Resetting the PRAM did not help. I removed the 'com.apple.windowserver.plist' and the 'com.apple.windowserver.OE35739etc,etcxxxxxxxxxxx.plist', but that did not help either.
Any other solutions, or do I have to downgrade or give up on Apple Computers alltogether after using them for over 25 years?

I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

Using the Macbook with new LED Apple Cinema Display? Not a beginner's Q...

Hi - I'm sort of cross-posting this because I'm not getting any answers in the Apple Cinema Display Forum, so here goes. So far, no one - not even a tech guy at a local Apple Reseller - has been able to help, so I've got my fingers crossed.
I just got a 24" Apple LED Cinema Display and am using it with my 13" Aluminum Unibody Macbook. What I do is dock the Macbook (with closed screen) when at home with the big display and just use that. I enlarge program windows and arrange the layout (in different spaces) to take advantage of the large screen and resolution. So far so good.
But I'm a student and take my macbook with me to class. When I open it up, all the program windows are set as they were on the larger screen, which means some are out of view or simply not well-adjusted for the smaller and lower resolution of the Macbook. I manually adjust these and work on the Macbook that way.
But when I return home in the evening, I have to adjust them again once I 'dock' the Macbook. Kind of a pain if I'm doing this twice a day.
What I'd like to know is: is there a setting or group of settings that would do this automatically for me? A program? An AppleScript? Surely someone out there has had the same issues and has found a fix, if such a thing exists. Or is it just a fact of nature one deals with when working on two screens?
To preclude one response: yes, I know I can mirror the displays when I open the Macbook along with the LED Cinema Display. But this simply mirrors them using the lower resolution and dimensions of the Macbook screen. And that kind of negates having the larger, Cinema Display.
So - any thoughts? Solutions? How do you guys manage with this?
Thanks,
Jeff

I don't really have a solution for you but wanted to link you to a discussion on this very topic that took place last month on MacInTouch.
http://www.macintouch.com/readerreports/helpplease/topic3939.html#d24sep2009
The conclusion seemed to be that it is not an OS issue, it's an application issue. There really was no good answer but some good insight into why the problem exists and why it may not be something Apple can fix.

Wi-fi not working with Apple Cinema Display and Bluetooth-peripheral

Hello everyone.
I have a MacBook Pro (Retina, 13-inch, Late 2013), with OS X Yosemite 10.10.1. My problem is that when I use my macbook in closed-clamshell mode, the wi-fi connection becomes very slow and it regularly drops.
My external display is a Apple Cinema Display, 22-inch, model M8149. My mouse is the Apple Magic Mouse and my keyboard is the Apple Wireless Keyboard.
Thanks in advance for helping me.

Good day Brett,
I followed the suggested steps and for Wireless Diagnostics is all ok, but my connectivity problems are not solved.
I have made two report of the analysis. The first in "normal" mode is downloadable here. The second in closed-clamshell mode is downloadable here.
Could you tell me what is going on?
Thank you a lot

Bridge CS5 preview / slideshow not working on 27" Apple Cinema Display

I'm using my 2009 (black key) MacBookPro and Mac OS X 10.6.7 running Snow Leopard.
2.4 GHz Intel Core 2 Duo
4 GB 1067 MHz DDR3
Adobe Bridge CS5 works beautifully on my MBP, my photography workflow depends on Bridge.
However, when I attach my 27" Apple Cinema Display and try to preview images by hitting the space bar I get a gray screen. Likewise, the slideshow renders only gray.
It's not the "black out other monitor". I've cleared the cache to re-render all the previews.
I've scoured these forums as well as the Apple ones, and the helpful folks currently at Photoshop World in Orlando advised me that, collectively, the kind people here know everything. I know I can't be the only photographer who uses this configuration. I'd like to use the display for client previews/ordering.
I would so appreciate any tips you may have for me; thank you in advance for your time.
Warmly,
Darcy
http://hisandhersphoto.net

Yes, thank you. I found that post - among others when researching before I asked. I tried all the suggestions in that one and in the others.
My issue isn't low quality rendering in the preview and slideshow - my issue is NO rendering at all in slideshow and preview. It's just blank. Gray.
I deleted the cache in my library and through the Bridge program itself to rebuild the previews. I tried the various options of "software rendering" on and off, and different configurations in the preferences and none seem to make the preview or slideshow work. I have all the updates from Adobe and from Mac.
I tried importing the photos I need to show my clients (who are coming to my studio this evening!) into Lightroom 3, and the LR slideshow works. But using LR and having to import photos into it is an extra step not in my workflow.
Ideally, I can make Bridge work instead of making yet another resource-consuming copy of these photos on this computer via the Lr library.
So - current state is unsolved.
Lightroom 3 slideshow and preview works, but isn't ideal since it involves importing the images into Lr. Since that works - would that mean my video card is acceptable?
Bridge can show thumbnails on the 27" display but no preview or slideshow.
Bridge preview and slideshow works perfectly on my 15" MacBook Pro.
I'm so disappointed since I bought the 27" Apple Cinema Display this week and was told it would work with my computer "out of the box" - I was sure to ask several times, "so there's nothing else I need to buy or do to make this work with my programs? Just plugin and go?" and several times I was assured, "Yes... plugin and go."
I sure would appreciate anyone who's made Adobe Bridge work with a 27" display. Thank you!
Darcy

Apple Cinema Display (20-inch DVI 2005) not working after 10.10.3 update

I have an Apple Cinema Display (20-inch DVI 2005) that isn't working after installing the 10.10.3 update. The screen is just blank, and the power light just blinks a few times every 30 seconds or so. I use this as a second monitor with my iMac (27-inch, Late 2012). Any way to fix this? Thanks!

Thank you for the update!
Next I would recommend the Reset the System section of the following article for additional troubleshooting:
Apple computers: Troubleshooting issues with video on internal or external displays
Reset the system
You can reset the Mac's parameter RAM and SMC.
Reset the resolution
Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
Start up in Safe Mode.
From the Apple () menu, choose System Preferences.
Choose Displays from the View menu to open the preferences pane.
Select any resolution and refresh rate that your display supports.
Restart your computer.
I would reset the SMC and the PRAM together, in that order one more time, then do the Safe Boot if needed.

HT204291 Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Using Azul media player app on my ipad Apple tv will only display sound but not video from movies. Any ideas on a fix. I set mirroring to on but it still does not display video. It will display photos and video recorded from my iphone.

Here are the steps for AirPlay:
Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
On your iPhone 4S/5 or iPad 2 or 3, double-click the Home Button to view your recently-used apps.
Swipe all the way to the right to until you see the icon.
Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
Tap the icon to see the list of available AirPlay devices.
Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
Now you should be seeing your iPad/iPhone on your TV.
Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
When you do that you will see an Orange screen
Now click "Done" and play the video you want to watch and it will AirPlay

Mac mini does not detect apple cinema display

Hello,
I have bought new mac mini (late 2012) with OSX 10.9.4 installed on it.
I have apple cinema display (20"), model: A1038 from before. When i turned on mac mini the display was not detected.
I also have one Samsung monitor which was detected without problems.
I tried next steps already:
- connect only apple cinema display with HDMI to DVI and turn on coomputer
- connect only apple cinema display with mini displayport to DVI and turn on coomputer
- connect both displays, went to System preferences -> display and click on 2Detect display"
nothing works
Specs of my mac mini:
mac mini (late 2012)
processor: 2.5GHz Intel Core i5
OSX: 10.9.4
graphics: Intel HD Graphics 4000
Have anyone idea what is wrong?
Thanks!
most22

Hi there most22,
You may find the troubleshooting steps in the article below helpful.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
-Griff W.

Apple Cinema Display is not reading or seeing...

Hello...
I would love to have your help on this situation.... My Apple Cinema Display is not reading or seeing my ipod adapter or my printer adapter at the back of the display. it is weird to see this happening now because it was working great until yesterday. I was like huh? how did this happen?
I tried to fix the mac with OS disc as well as Pro Tech Tool. they did not see anything wrong with it. think that the plug holes are worn out or burnt? thanks for your help... can email me with directions or explanations [email protected] (i rarely come in this boards unless I come up with a problem and i come here to check for information in this board...
It is Apple Cinema Display - LCD display - TFT - 20" - 1680 x 1050 (It is running strong for 6 or 7 years with no problems at all.)
thanks!

The USB circuitry sometimes fails in older Apple displays. This can affect the USB ports, computer control of brightness, and computer sleep. Sometimes unplugging all cables from the display for a few minutes will fix it for a while.

23" Apple Cinema Display will not turn back on

For some reason this morning I thought I'd help the world and turned off my ACD. I'm back at the officce now and cannot turn it back on. It's been on since I bought it (yes, it goes into sleep mode when not in use) in December. In either case, is there a special trick to turning this thing back on? I tried the plug-unplug thing, I turned off and on my PC (I also use it for my g4 powerbook) to which it was connected at the time as well - nothing. Any thoughts out there?
Thanks in advance for any help,
PC Box Windows XP 23" Apple Cinema Display, also a 12" G4 Powerbook

I am having the same issue right now. Except it has happened with my 2 monitors on my dual monitor G5 Quad set-up. Both monitors are down. I tried a different monitor in the same computer and it works fine. So I think it must be a monitor related issue.
Although, I wonder if it possible that the computer has somehow put both monitors into a "deep sleep" mode? Is there such a thing. I tried a PRAM reset that didn't help, so I'm not sure if this is the case.
Next up is to figure out some way to test the power on the 2 power adapters/transformers without electocuting myself. I have a suspicion at this point that a power surge may have killed them?
Let me know if anyone has similar scenario, and if a solution was found.

2005 Apple Cinema displays not able to show movies with new iTunes

ITunes is giving me the following error when trying to watch movies on my 2005 Apple Cinema display(s).
The selected movie won’t play on one of your connected displays.
This movie can be played only on displays that support HDCP (High-bandwidth Digital Content Protection).
Try moving the iTunes window to a different display. Make sure the entire window is on the supported display.
I called the Apple support, they said my displays can not support HDCP. Can anyone else comment on this?
Is this true to the best of your knowledge?
Is there anything I can do to make my movies play again? Other than buy new monitors of course.
Thanks...

Hi,
Highlight one of the applications that cannot be updated and click File> Get Info. Make sure you are signing-in to the iTunes Store with that Account Name shown in the Get Info window.
Then sign-in to the iTunes store and verify the account information as described here: http://support.apple.com/kb/HT1918
If the issue persists, try to reconfigure the security software or remove the SC Info folder as others have in this related discussion: http://discussions.apple.com/thread.jspa?threadID=1939036
Message was edited by: Jason L

Refurb Apple Cinema Displays-US But Not UK?

Similar Messages

Maybe you are looking for