Refuse 8.
i refuse to download any new versions of itunes until they add keyboard shortcuts for shuffle. grr.
You can send feedback/feature requests directly to Apple at this link: Apple Product Feedback
Similar Messages
-
Some of my apps refuse to open. For example, google crome gives me the message that it quit unexpectedly and gives me the option to submit a report to no resolve. Does anyone have suggestions?
Welcome to the Apple community.
Does anyone have suggestions?
Trash the spyware (Chrome) and use Safari. -
Mac Mini repeatedly refuses to wake from sleep
Please to anyone I really need your help.
First let me preface you that I know my console log is incredibly long, and let me know if there is a way to make them more manageable and I will update.
Also let me know which other logs or screen shots or active programs I can provide
I have a 2011 2.5 ghz Mac mini i5 with AMD Radeon 6630M
I have customized this with a 256gb SSD and 2TB HDD as well as 16gb RAM.
I also have a Monoprice drawing tablet attached.
My keyboard and trackpad are bluetooth
I am running yosemite 10.10.1.
10.10 was installed with a clean install.
So here is the issue:
The computer was working perfectly, and then, I can't identify a specific time, it started to just occasionally refuse to wake up from sleep (monitor off, won't activate).
Interestingly it seems to have only started happening AFTER I purchased an apple TV which I use to mirror my screen for video playback. Prior to that I had two mac mini's (one hooked up to TV as a media center and one desktop). This configuration resulted in no freezing issues for a few months.
My parents wanted to get an apple desktop so I ended up giving them my mac mini media center and decided to try using an apple TV mirroring with my mac mini instead.
Now the computer seems to work perfectly fine for a day or two and then it just refuses to wake from sleep.
I do a hard reset and it boots up with no issue and everything works perfectly for a couple days (or less), then it just won't wake from sleep at all.
This can occur when still mirrored to apple TV, but also occurs when it is not.
Background programs tend to be: dropbox, google drive, evernote, flycut, Teamviewer, safari and google chrome
Additionally I have noticed that if the computer has been on for a couple days, when trying got mirror it becomes very choppy.
Activity monitor identifies no CPU or memory hogs. (can post if needed)
The console does seem to show A LOT of issues, but I can't make any sense of them, and I have tried searching google for what they might mean.
HERE ARE THE CONSOLE LOGS FROM THE FEW HOURS BEFORE I ATTEMPTED TO UNSUCCESSFULLY WAKE
11/26/14 4:01:21.687 PM CalendarAgent[324]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
11/26/14 4:01:21.728 PM CalendarAgent[324]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
11/26/14 4:04:35.987 PM BezelServices 245.23[67]: ASSERTION FAILED: dvcAddrRef != ((void *)0) -[DriverServices getDeviceAddress:] line: 2602
11/26/14 4:04:35.987 PM BezelServices 245.23[67]: ASSERTION FAILED: dvcAddrRef != ((void *)0) -[DriverServices getDeviceAddress:] line: 2602
11/26/14 4:04:41.601 PM identityservicesd[346]: [Warning] ====== IDS Traffic Usage:
11/26/14 4:04:41.601 PM identityservicesd[346]: [Warning] Service: com.apple.private.alloy.icloudpairing
11/26/14 4:04:41.601 PM identityservicesd[346]: [Warning] outgoing-messages: 3
11/26/14 4:04:41.601 PM identityservicesd[346]: [Warning]
11/26/14 4:04:41.602 PM identityservicesd[346]: [Warning] Service: com.apple.madrid
11/26/14 4:04:41.602 PM identityservicesd[346]: [Warning] incoming-messages: 8
11/26/14 4:04:41.602 PM identityservicesd[346]: [Warning]
11/26/14 4:04:41.602 PM identityservicesd[346]: [Warning] ====== Done
11/26/14 4:19:21.821 PM CalendarAgent[324]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
11/26/14 4:19:21.865 PM CalendarAgent[324]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
11/26/14 4:19:31.000 PM kernel[0]: Over-release of kernel-internal importance assertions for pid 1559 (AddressBookSourc), dropping 1 assertion(s) but task only has 0 remaining (0 external).
11/26/14 4:19:31.470 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
11/26/14 4:19:31.490 PM com.apple.iCloudHelper[1562]: objc[1562]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircl e and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/Famil yNotification. One of the two will be used. Which one is undefined.
11/26/14 4:19:31.497 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
11/26/14 4:21:01.000 PM kernel[0]: Google Chrome He (map: 0xffffff802e43ab40) triggered DYLD shared region unnest for map: 0xffffff802e43ab40, region 0x7fff97200000->0x7fff97400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
11/26/14 4:37:21.951 PM CalendarAgent[324]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
11/26/14 4:37:21.994 PM CalendarAgent[324]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
11/26/14 4:53:02.000 PM kernel[0]: Google Chrome He (map: 0xffffff8036ea20f0) triggered DYLD shared region unnest for map: 0xffffff8036ea20f0, region 0x7fff97200000->0x7fff97400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
11/26/14 4:55:06.723 PM CalendarAgent[324]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
11/26/14 4:55:06.764 PM CalendarAgent[324]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
11/26/14 4:55:32.526 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
11/26/14 4:55:32.565 PM com.apple.iCloudHelper[1587]: objc[1587]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircl e and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/Famil yNotification. One of the two will be used. Which one is undefined.
11/26/14 4:55:32.579 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
11/26/14 5:04:41.516 PM identityservicesd[346]: [Warning] ====== IDS Traffic Usage:
11/26/14 5:04:41.516 PM identityservicesd[346]: [Warning] Service: com.apple.private.alloy.icloudpairing
11/26/14 5:04:41.517 PM identityservicesd[346]: [Warning] outgoing-messages: 3
11/26/14 5:04:41.517 PM identityservicesd[346]: [Warning]
11/26/14 5:04:41.517 PM identityservicesd[346]: [Warning] Service: com.apple.madrid
11/26/14 5:04:41.517 PM identityservicesd[346]: [Warning] incoming-messages: 10
11/26/14 5:04:41.517 PM identityservicesd[346]: [Warning]
11/26/14 5:04:41.518 PM identityservicesd[346]: [Warning] ====== Done
11/26/14 5:13:22.527 PM CalendarAgent[324]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
11/26/14 5:13:22.571 PM CalendarAgent[324]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
11/26/14 5:13:31.440 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
11/26/14 5:13:31.464 PM com.apple.iCloudHelper[1596]: objc[1596]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircl e and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/Famil yNotification. One of the two will be used. Which one is undefined.
11/26/14 5:13:31.474 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
11/26/14 5:22:01.000 PM kernel[0]: Google Chrome He (map: 0xffffff8036ea20f0) triggered DYLD shared region unnest for map: 0xffffff8036ea20f0, region 0x7fff97200000->0x7fff97400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
11/26/14 5:31:21.008 PM com.apple.iCloudHelper[1611]: objc[1611]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircl e and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/Famil yNotification. One of the two will be used. Which one is undefined.
11/26/14 5:31:21.021 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
11/26/14 5:31:21.665 PM CalendarAgent[324]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
11/26/14 5:31:21.713 PM CalendarAgent[324]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
11/26/14 5:33:33.218 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
11/26/14 5:49:20.819 PM bird[320]: notify name "CKStatusReport" has been registered 140 times - this may be a leak
11/26/14 5:49:21.142 PM nsurlsessiond[349]: Being asked if container with identifier com.apple.clouddocs.VDZ8PCF9YD.com.halfbrick.FruitNinjaLite is foreground before getting callback from BRContainersMonitor!
11/26/14 5:49:21.142 PM nsurlsessiond[349]: Being asked if container with identifier com.apple.clouddocs.VDZ8PCF9YD.com.halfbrick.FruitNinjaLite is foreground before getting callback from BRContainersMonitor!
11/26/14 5:49:21.433 PM nsurlsessiond[349]: Being asked if container with identifier com.apple.clouddocs.com.apple.Pages is foreground before getting callback from BRContainersMonitor!
11/26/14 5:49:21.434 PM nsurlsessiond[349]: Being asked if container with identifier com.apple.clouddocs.com.apple.Pages is foreground before getting callback from BRContainersMonitor!
11/26/14 5:49:21.606 PM CalendarAgent[324]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
11/26/14 5:49:21.641 PM CalendarAgent[324]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
11/26/14 5:49:21.741 PM nsurlsessiond[349]: Being asked if container with identifier com.apple.clouddocs.com.apple.Automator is foreground before getting callback from BRContainersMonitor!
11/26/14 5:49:21.741 PM nsurlsessiond[349]: Being asked if container with identifier com.apple.clouddocs.com.apple.Automator is foreground before getting callback from BRContainersMonitor!
11/26/14 5:49:22.038 PM nsurlsessiond[349]: Being asked if container with identifier com.apple.clouddocs.VJXTL73S8G.com.algoriddim.djay-ios is foreground before getting callback from BRContainersMonitor!
11/26/14 5:49:22.039 PM nsurlsessiond[349]: Being asked if container with identifier com.apple.clouddocs.VJXTL73S8G.com.algoriddim.djay-ios is foreground before getting callback from BRContainersMonitor!
11/26/14 5:49:22.356 PM nsurlsessiond[349]: Being asked if container with identifier com.apple.clouddocs.C5Z3V9M735.com.bitmonstergames.lili is foreground before getting callback from BRContainersMonitor!
11/26/14 5:49:22.357 PM nsurlsessiond[349]: Being asked if container with identifier com.apple.clouddocs.C5Z3V9M735.com.bitmonstergames.lili is foreground before getting callback from BRContainersMonitor!
11/26/14 5:49:22.651 PM nsurlsessiond[349]: Being asked if container with identifier com.apple.clouddocs.com.apple.Numbers is foreground before getting callback from BRContainersMonitor!
11/26/14 5:49:22.652 PM nsurlsessiond[349]: Being asked if container with identifier com.apple.clouddocs.com.apple.Numbers is foreground before getting callback from BRContainersMonitor!
11/26/14 5:49:22.931 PM cloudd[354]: Stream 0x7fdd159500c0 is sending an event before being opened
11/26/14 5:49:22.947 PM nsurlsessiond[349]: Being asked if container with identifier com.apple.clouddocs.ZL5FFY3M32.com.mseven.mSecure is foreground before getting callback from BRContainersMonitor!
11/26/14 5:49:22.947 PM nsurlsessiond[349]: Being asked if container with identifier com.apple.clouddocs.ZL5FFY3M32.com.mseven.mSecure is foreground before getting callback from BRContainersMonitor!
11/26/14 5:54:03.000 PM kernel[0]: Google Chrome He (map: 0xffffff802e3a7a50) triggered DYLD shared region unnest for map: 0xffffff802e3a7a50, region 0x7fff97200000->0x7fff97400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
11/26/14 6:04:41.432 PM identityservicesd[346]: [Warning] ====== IDS Traffic Usage:
11/26/14 6:04:41.432 PM identityservicesd[346]: [Warning] Service: com.apple.private.alloy.icloudpairing
11/26/14 6:04:41.432 PM identityservicesd[346]: [Warning] outgoing-messages: 3
11/26/14 6:04:41.432 PM identityservicesd[346]: [Warning]
11/26/14 6:04:41.433 PM identityservicesd[346]: [Warning] Service: com.apple.madrid
11/26/14 6:04:41.433 PM identityservicesd[346]: [Warning] incoming-messages: 10
11/26/14 6:04:41.433 PM identityservicesd[346]: [Warning]
11/26/14 6:04:41.433 PM identityservicesd[346]: [Warning] ====== Done
11/26/14 6:07:21.702 PM CalendarAgent[324]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
11/26/14 6:07:21.748 PM CalendarAgent[324]: [com.apple.calendar.store.log.caldav.coredav] [Refusing to parse response to PROPPATCH because of content-type: [text/html; charset=UTF-8].]
11/26/14 6:07:31.474 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
11/26/14 6:07:31.492 PM com.apple.iCloudHelper[1636]: objc[1636]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircl e and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/Famil yNotification. One of the two will be used. Which one is undefined.
11/26/14 6:07:31.503 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
HERE ARE THE CONSOLE LOGS IN THE TIME AROUND WHEN I TRIED TO WAKE THE COMPUTER
11/26/14 6:10:37.688 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
11/26/14 6:21:17.000 PM bootlog[0]: BOOT_TIME 1417044077 0
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.AccountPolicyHelper" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/asl" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.authd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.awdd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.callhistory.asl.conf" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.cloudd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.clouddocs" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.commerce.asl" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.CoreDuetAdmissionControl" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.eventmonitor" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.family.asl" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.ical" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.icloud.FindMyDevice" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.install" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.iokit.power" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.mail" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.MessageTracer" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.networking.symptoms" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.networking.symptoms" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.performance" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.secinitd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM syslogd[16]: Configuration Notice:
ASL Module "com.apple.securityd" claims selected messages.
Those messages may not appear in standard system log files or in the ASL database.
11/26/14 6:21:19.000 PM kernel[0]: Longterm timer threshold: 1000 ms
11/26/14 6:21:19.000 PM kernel[0]: PMAP: PCID enabled
11/26/14 6:21:19.000 PM kernel[0]: Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
11/26/14 6:21:19.000 PM kernel[0]: vm_page_bootstrap: 3920186 free pages and 241350 wired pages
11/26/14 6:21:19.000 PM kernel[0]: kext submap [0xffffff7f80a00000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000a00000]
11/26/14 6:21:19.000 PM kernel[0]: zone leak detection enabled
11/26/14 6:21:19.000 PM kernel[0]: "vm_compressor_mode" is 4
11/26/14 6:21:19.000 PM kernel[0]: multiq scheduler config: deep-drain 0, urgent first 1, depth limit 4, band limit 127, sanity check 0
11/26/14 6:21:19.000 PM kernel[0]: standard timeslicing quantum is 10000 us
11/26/14 6:21:19.000 PM kernel[0]: standard background quantum is 2500 us
11/26/14 6:21:19.000 PM kernel[0]: mig_table_max_displ = 13
11/26/14 6:21:19.000 PM kernel[0]: TSC Deadline Timer supported and enabled
11/26/14 6:21:19.000 PM kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
11/26/14 6:21:19.000 PM kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
11/26/14 6:21:19.000 PM kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=1 Enabled
11/26/14 6:21:19.000 PM kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=3 Enabled
11/26/14 6:21:19.000 PM kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=255 Disabled
11/26/14 6:21:19.000 PM kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=255 Disabled
11/26/14 6:21:19.000 PM kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=255 Disabled
11/26/14 6:21:19.000 PM kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=255 Disabled
11/26/14 6:21:19.000 PM kernel[0]: calling mpo_policy_init for TMSafetyNet
11/26/14 6:21:19.000 PM kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
11/26/14 6:21:19.000 PM kernel[0]: calling mpo_policy_init for AMFI
11/26/14 6:21:19.000 PM kernel[0]: Security policy loaded: Apple Mobile File Integrity (AMFI)
11/26/14 6:21:19.000 PM kernel[0]: calling mpo_policy_init for Sandbox
11/26/14 6:21:19.000 PM kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
11/26/14 6:21:19.000 PM kernel[0]: calling mpo_policy_init for Quarantine
11/26/14 6:21:19.000 PM kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
11/26/14 6:21:19.000 PM kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
11/26/14 6:21:19.000 PM kernel[0]: The Regents of the University of California. All rights reserved.
11/26/14 6:21:19.000 PM kernel[0]: MAC Framework successfully initialized
11/26/14 6:21:19.000 PM kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
11/26/14 6:21:19.000 PM kernel[0]: AppleKeyStore starting (BUILT: Sep 19 2014 00:11:30)
11/26/14 6:21:19.000 PM kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
11/26/14 6:21:19.000 PM kernel[0]: ACPI: sleep states S3 S4 S5
11/26/14 6:21:19.000 PM kernel[0]: AppleIntelCPUPowerManagement: Turbo Ratios 0057
11/26/14 6:21:19.000 PM kernel[0]: AppleIntelCPUPowerManagement: (built 00:11:36 Sep 19 2014) initialization complete
11/26/14 6:21:19.000 PM kernel[0]: pci (build 00:11:20 Sep 19 2014), flags 0xe3000, pfm64 (36 cpu) 0xf80000000, 0x80000000
11/26/14 6:21:19.000 PM kernel[0]: [ PCI configuration begin ]
11/26/14 6:21:19.000 PM kernel[0]: console relocated to 0xf80010000
11/26/14 6:21:19.000 PM kernel[0]: [ PCI configuration end, bridges 13, devices 18 ]
11/26/14 6:21:19.000 PM kernel[0]: FireWire (OHCI) TI ID 823f built-in now active, GUID a4b197fffed35b90; max speed s800.
11/26/14 6:21:19.000 PM kernel[0]: mcache: 4 CPU(s), 64 bytes CPU cache line size
11/26/14 6:21:19.000 PM kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]
11/26/14 6:21:19.000 PM kernel[0]: rooting via boot-uuid from /chosen: 63B7062C-5B87-3FFD-939F-B3D35565E8D0
11/26/14 6:21:19.000 PM kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
11/26/14 6:21:19.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
11/26/14 6:21:19.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
11/26/14 6:21:19.000 PM kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
11/26/14 6:21:19.000 PM kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
11/26/14 6:21:19.000 PM kernel[0]: AppleIntelCPUPowerManagementClient: ready
11/26/14 6:21:19.000 PM kernel[0]: Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SATA@1F,2/AppleIntelPchS eriesAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOB lockStorageDriver/Samsung SSD 840 EVO 250GB Media/IOGUIDPartitionScheme/Macintosh HD@2
11/26/14 6:21:19.000 PM kernel[0]: BSD root: disk0s2, major 1, minor 3
11/26/14 6:21:19.000 PM kernel[0]: jnl: b(1, 3): replay_journal: from: 21117952 to: 24910336 (joffset 0x747000)
11/26/14 6:21:19.000 PM kernel[0]: BTCOEXIST off
11/26/14 6:21:19.000 PM kernel[0]: BRCM tunables:
11/26/14 6:21:19.000 PM kernel[0]: pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[ 32] reapcount[ 128]
11/26/14 6:21:19.000 PM kernel[0]: jnl: b(1, 3): journal replay done.
11/26/14 6:21:19.000 PM kernel[0]: hfs: mounted Macintosh HD on device root_device
11/26/14 6:21:19.000 PM kernel[0]: VM Swap Subsystem is ON
11/26/14 6:21:19.000 PM kernel[0]: hfs: Removed 106 orphaned / unlinked files and 30 directories
11/26/14 6:21:19.358 PM com.apple.xpc.launchd[1]: (com.teamviewer.service) This service is defined to be constantly running and is inherently inefficient.
11/26/14 6:21:19.614 PM hidd[71]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
11/26/14 6:21:19.618 PM hidd[71]: ____IOHIDSessionScheduleAsync_block_invoke: thread_id=0x105ec0000
11/26/14 6:21:19.619 PM hidd[71]: HID Session async scheduling initiated.
11/26/14 6:21:19.619 PM hidd[71]: HID Session async root queue running at priority 63 and schedule 2.
11/26/14 6:21:19.619 PM hidd[71]: HID Session async scheduling complete.
11/26/14 6:21:19.619 PM hidd[71]: Successfully opened the IOHIDSession
11/26/14 6:21:19.621 PM fseventsd[20]: event logs in /.fseventsd out of sync with volume. destroying old logs. (80211 2 80234)
11/26/14 6:21:19.636 PM com.apple.SecurityServer[53]: Session 100000 created
11/26/14 6:21:19.358 PM com.apple.xpc.launchd[1]: (com.microsoft.office.licensing.helper) This key does not do anything: OnDemand
11/26/14 6:21:19.358 PM com.apple.xpc.launchd[1]: (com.microsoft.office.licensing.helper) The ServiceIPC key is no longer respected. Please remove it.
11/26/14 6:21:19.359 PM com.apple.xpc.launchd[1]: (com.apple.AppleFileServer) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
11/26/14 6:21:19.649 PM fseventsd[20]: log dir: /.fseventsd getting new uuid: 796B7427-D1EC-4899-9B10-F9396F84A986
11/26/14 6:21:19.359 PM com.apple.xpc.launchd[1]: (com.apple.alf) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
11/26/14 6:21:19.361 PM com.apple.xpc.launchd[1]: (com.apple.audio.coreaudiod) Unknown key for array: seatbelt-profiles
11/26/14 6:21:19.362 PM com.apple.xpc.launchd[1]: (com.apple.auditd) The TimeOut key is no longer respected. It never did anything anyway.
11/26/14 6:21:19.363 PM launchd[1]: assertion failed: 14B25: libxpc.dylib + 34510 [9437C02E-A07B-38C8-91CB-299FAA63083D]: 0x8d
11/26/14 6:21:19.363 PM com.apple.xpc.launchd[1]: (com.apple.backupd-status) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
11/26/14 6:21:19.363 PM com.apple.xpc.launchd[1]: (com.apple.backupd.status.xpc) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
11/26/14 6:21:19.365 PM com.apple.xpc.launchd[1]: (com.apple.bsd.dirhelper) The TimeOut key is no longer respected. It never did anything anyway.
11/26/14 6:21:19.366 PM com.apple.xpc.launchd[1]: (com.apple.cmio.AVCAssistant) ThrottleInterval set to zero. You're not that important. Ignoring.
11/26/14 6:21:19.366 PM com.apple.xpc.launchd[1]: (com.apple.autofsd) This service is defined to be constantly running and is inherently inefficient.
11/26/14 6:21:19.366 PM com.apple.xpc.launchd[1]: (com.apple.cmio.IIDCVideoAssistant) ThrottleInterval set to zero. You're not that important. Ignoring.
11/26/14 6:21:19.717 PM watchdogd[31]: [watchdog_daemon] @( wd_watchdog_open) - IOIteratorNext failed (kr=0)
11/26/14 6:21:19.718 PM watchdogd[31]: [watchdog_daemon] @( wd_daemon_init) - could not initialize the hardware watchdog
11/26/14 6:21:19.722 PM watchdogd[31]: [watchdog_daemon] @( main) - cannot initialize the watchdog service
11/26/14 6:21:19.000 PM kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
11/26/14 6:21:19.000 PM kernel[0]: IO80211Interface::efiNVRAMPublished():
11/26/14 6:21:19.000 PM kernel[0]: bpfAttach len 64 dlt 12
11/26/14 6:21:19.725 PM com.apple.xpc.launchd[1]: (com.apple.watchdogd) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
11/26/14 6:21:19.829 PM iconservicesagent[37]: iconservicesagent launched.
11/26/14 6:21:19.973 PM com.apple.xpc.launchd[1]: (com.apple.CoreRAID[21]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.CoreRAID
11/26/14 6:21:19.978 PM com.apple.xpc.launchd[1]: (com.apple.FileSyncAgent.PHD.isRunning) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
11/26/14 6:21:19.984 PM com.apple.xpc.launchd[1]: (com.apple.mbloginhelper.user) This key does not do anything: OnDemand
11/26/14 6:21:19.984 PM com.apple.xpc.launchd[1]: (com.apple.mbpluginhost.user) This key does not do anything: OnDemand
11/26/14 6:21:19.990 PM com.apple.xpc.launchd[1]: (com.apple.secd) This key does not do anything: OnDemand
11/26/14 6:21:19.990 PM com.apple.xpc.launchd[1]: (com.apple.secd) The ServiceIPC key is no longer respected. Please remove it.
11/26/14 6:21:19.993 PM com.apple.xpc.launchd[1]: (com.apple.speech.speechsynthesisd) This key does not do anything: OnDemand
11/26/14 6:21:19.998 PM com.apple.xpc.launchd[1]: (com.apple.TrustEvaluationAgent) This key does not do anything: OnDemand
11/26/14 6:21:20.080 PM com.apple.SecurityServer[53]: Entering service
11/26/14 6:21:20.108 PM com.apple.xpc.launchd[1]: (com.apple.DataDetectorsDynamicData) The JoinExistingSession key is only available to Application services.
11/26/14 6:21:20.000 PM kernel[0]: IOGraphics flags 0x43
11/26/14 6:21:20.000 PM kernel[0]: IOBluetoothUSBDFU::probe
11/26/14 6:21:20.000 PM kernel[0]: IOBluetoothUSBDFU::probe ProductID - 0x8281 FirmwareVersion - 0x0147
11/26/14 6:21:20.000 PM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0xd000 ****
11/26/14 6:21:20.000 PM kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0xd000 ****
11/26/14 6:21:20.000 PM kernel[0]: [IOBluetoothHCIController][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0xd000
11/26/14 6:21:20.000 PM kernel[0]: [IOBluetoothHCIController][start] -- completed
11/26/14 6:21:20.000 PM kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
11/26/14 6:21:20.000 PM kernel[0]: **** [IOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0x7180 -- 0xc800 -- 0xd000 ****
11/26/14 6:21:20.000 PM kernel[0]: ** GPU Hardware VM is disabled (multispace: disabled, page table updates with DMA: disabled)
11/26/14 6:21:20.267 PM kdc[61]: label: default
11/26/14 6:21:20.267 PM kdc[61]: dbname: od:/Local/Default
11/26/14 6:21:20.269 PM kdc[61]: mkey_file: /var/db/krb5kdc/m-key
11/26/14 6:21:20.286 PM kdc[61]: acl_file: /var/db/krb5kdc/kadmind.acl
11/26/14 6:21:20.302 PM opendirectoryd[46]: BUG in libdispatch: 14B25 - 2004 - 0x5
11/26/14 6:21:20.000 PM kernel[0]: jnl: disk1s2: replay_journal: from: 155467776 to: 156610560 (joffset 0x3a38000)
11/26/14 6:21:20.000 PM kernel[0]: Previous shutdown cause: 3
11/26/14 6:21:20.000 PM kernel[0]: DSMOS has arrived
11/26/14 6:21:20.562 PM iconservicesagent[37]: Starting service with cache path: /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/com.apple.iconservices
11/26/14 6:21:20.682 PM com.apple.usbmuxd[52]: usbmuxd-344.3 on Oct 13 2014 at 21:10:09, running 64 bit
11/26/14 6:21:20.692 PM loginwindow[67]: Login Window Application Started
11/26/14 6:21:20.716 PM thermald[22]: Waiting for OSTT support notification
11/26/14 6:21:20.000 PM kernel[0]: jnl: disk1s2: journal replay done.
11/26/14 6:21:20.781 PM UserEventAgent[17]: Captive: CNPluginHandler en1: Inactive
11/26/14 6:21:20.791 PM com.apple.xpc.launchd[1]: (com.apple.xpc.launchd.domain.system) Service "com.apple.ManagedClient.startup" tried to hijack endpoint "com.apple.ManagedClient.agent" from owner: com.apple.ManagedClient
11/26/14 6:21:20.794 PM kdc[61]: WARNING Found KDC certificate (O=System Identity,CN=com.apple.kerberos.kdc)is missing the PK-INIT KDC EKU, this is bad for interoperability.
11/26/14 6:21:20.000 PM kernel[0]: hfs: mounted Internal Storage Drive on device disk1s2
11/26/14 6:21:20.895 PM secinitd[236]: UID[0]: cache loaded: /System/Library/Caches/com.apple.app-sandbox-cache.plist
11/26/14 6:21:20.896 PM secinitd[236]: ctkd[235]: unable to get root path for bundle of main executable: /System/Library/Frameworks/CryptoTokenKit.framework/ctkd
11/26/14 6:21:20.935 PM apsd[50]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
11/26/14 6:21:20.973 PM fseventsd[20]: event logs in /Volumes/Internal Storage Drive/.fseventsd out of sync with volume. destroying old logs. (43490 0 80235)
11/26/14 6:21:20.974 PM smb-sync-preferences[70]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.smbd
11/26/14 6:21:21.000 PM kernel[0]: AirPort: Link Down on en1. Reason 8 (Disassociated because station leaving).
11/26/14 6:21:21.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
11/26/14 6:21:21.000 PM kernel[0]: bpfAttach len 94 dlt 163
11/26/14 6:21:21.000 PM kernel[0]: bpfAttach len 30 dlt 105
11/26/14 6:21:21.000 PM kernel[0]: bpfAttach len 52 dlt 127
11/26/14 6:21:21.000 PM kernel[0]: bpfAttach len 38 dlt 192
11/26/14 6:21:21.013 PM configd[25]: dhcp_arp_router: en1 SSID unavailable
11/26/14 6:21:21.016 PM configd[25]: preference: no sharing preferences
11/26/14 6:21:21.017 PM digest-service[237]: label: default
11/26/14 6:21:21.017 PM digest-service[237]: dbname: od:/Local/Default
11/26/14 6:21:21.017 PM digest-service[237]: mkey_file: /var/db/krb5kdc/m-key
11/26/14 6:21:21.017 PM digest-service[237]: acl_file: /var/db/krb5kdc/kadmind.acl
11/26/14 6:21:21.028 PM digest-service[237]: digest-request: uid=0
11/26/14 6:21:21.080 PM digest-service[237]: digest-request: netr probe 0
11/26/14 6:21:21.084 PM WindowServer[233]: Server is starting up
11/26/14 6:21:21.085 PM digest-service[237]: digest-request: init request
11/26/14 6:21:21.097 PM digest-service[237]: digest-request: init return domain: BUILTIN server: LOCALHOST indomain was: <NULL>
11/26/14 6:21:21.105 PM smb-sync-preferences[70]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.smbd
11/26/14 6:21:21.111 PM smb-sync-preferences[70]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.smbd
11/26/14 6:21:21.155 PM mds[33]: (FMW.Normal:1402) FMW 0 0
11/26/14 6:21:21.196 PM apsd[50]: Unable to bootstrap_look_up connection port 'com.apple.askpermission.aps' for user 0: Unknown service name
11/26/14 6:21:21.205 PM apsd[50]: Attempt to set push wake topics without dark wake enabled: ()
11/26/14 6:21:21.206 PM apsd[50]: Unable to bootstrap_look_up connection port 'com.apple.askpermission.aps' for user 0: Unknown service name
11/26/14 6:21:21.206 PM apsd[50]: <APSConnectionServer: 0x7f9fb8d2f7b0> Invalid mach port - Cleaning up this named port's topics. com.apple.askpermission.aps
11/26/14 6:21:21.000 PM kernel[0]: in func createVirtualInterface ifRole = 1
11/26/14 6:21:21.000 PM kernel[0]: AirPort_Brcm4331_P2PInterface::init name <p2p0> role 1
11/26/14 6:21:21.000 PM kernel[0]: AirPort_Brcm4331_P2PInterface::init <p2p> role 1
11/26/14 6:21:21.000 PM kernel[0]: Created virtif 0xffffff804584ec00 p2p0
11/26/14 6:21:21.288 PM lsregister[242]: LaunchServices: Begin database seeding
11/26/14 6:21:21.289 PM lsregister[242]: LaunchServices: Completed database seeding
11/26/14 6:21:21.298 PM airportd[30]: airportdProcessDLILEvent: en1 attached (up)
11/26/14 6:21:21.487 PM systemkeychain[174]: done file: /var/run/systemkeychaincheck.done
11/26/14 6:21:21.634 PM iconservicesd[38]: iconservicesd launched.
11/26/14 6:21:21.637 PM iconservicesd[38]: Cache path: /Library/Caches/com.apple.iconservices.store
11/26/14 6:21:21.798 PM com.apple.xpc.launchd[1]: (com.apple.appkit.xpc.sandboxedServiceRunner) The JoinExistingSession key is only available to Application services.
11/26/14 6:21:21.798 PM com.apple.xpc.launchd[1]: (com.apple.lakitu) The JoinExistingSession key is only available to Application services.
11/26/14 6:21:21.799 PM com.apple.xpc.launchd[1]: (com.apple.accounts.dom) The _DirtyJetsamMemoryLimit key is not available on this platform.
11/26/14 6:21:21.799 PM com.apple.xpc.launchd[1]: (com.apple.imfoundation.IMRemoteURLConnectionAgent) The _DirtyJetsamMemoryLimit key is not available on this platform.
11/26/14 6:21:21.871 PM locationd[55]: Logging binary sensor data to /var/folders/zz/zyxvpxvq6csfxvn_n00000sm00006d/C/locationdSensors.bin
11/26/14 6:21:21.893 PM locationd[55]: NBB-Could not get UDID for stable refill timing, falling back on random
11/26/14 6:21:21.000 PM kernel[0]: en2: promiscuous mode enable succeeded
11/26/14 6:21:21.992 PM discoveryd[49]: Basic Sockets GetProcessNameFromSocket() failed errno[57] err[-1]
11/26/14 6:21:21.992 PM discoveryd[49]: Basic Sockets Unknown(-1), errno 0 UDS FD=3
11/26/14 6:21:21.992 PM discoveryd[49]: Basic Sockets UDS FD=3 ERROR: failed to get effective user ID, errno 0
11/26/14 6:21:21.993 PM discoveryd[49]: Basic SleepProxy BSP Server Disabled. Metric = 3373
11/26/14 6:21:21.994 PM WindowServer[233]: Session 257 retained (2 references)
11/26/14 6:21:21.994 PM WindowServer[233]: Session 257 released (1 references)
11/26/14 6:21:21.998 PM discoveryd[49]: AwdlD2d AwdlD2dInitialize: Initialized
11/26/14 6:21:22.001 PM discoveryd[49]: D2D_IPC: Loaded
11/26/14 6:21:22.020 PM discoveryd_helper[249]: Basic RemoteControl com.apple.discoveryd_helper Starting XPC Server
11/26/14 6:21:22.021 PM discoveryd_helper[249]: Detailed RemoteControl com.apple.discoveryd_helper XPC connection 0x7f8003407220: start (pid=49, <unknown> not root)
11/26/14 6:21:22.024 PM WindowServer[233]: Session 257 retained (2 references)
11/26/14 6:21:22.027 PM WindowServer[233]: init_page_flip: page flip mode is on
11/26/14 6:21:22.074 PM discoveryd[49]: Basic WABServer NetResolverEvent no resolvers, resetting domains
11/26/14 6:21:22.075 PM discoveryd[49]: Basic DNSResolver etc/hosts file changed: Event 0x7f9ef870c9f0 Flushed /etc/hosts cache
11/26/14 6:21:22.077 PM discoveryd[49]: Basic BTMMServer,Warn Couldn't remove from DynStore No such key
11/26/14 6:21:22.078 PM discoveryd[49]: Basic RemoteControl com.apple.discoveryd Starting XPC Server
11/26/14 6:21:22.078 PM discoveryd[49]: Basic SleepProxy Could not get the primary interface
11/26/14 6:21:22.079 PM discoveryd[49]: Basic RemoteControl com.apple.discoveryd.dnsproxy Starting XPC Server
11/26/14 6:21:22.085 PM discoveryd[49]: Basic SleepProxy Sleep Proxy Server is not enabled
11/26/14 6:21:22.000 PM kernel[0]: en1: 802.11d country code set to 'US'.
11/26/14 6:21:22.000 PM kernel[0]: en1: Supported channels 1 2 3 4 5 6 7 8 9 10 11 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
11/26/14 6:21:22.119 PM awacsd[251]: Starting awacsd connectivity_executables-112 (Sep 9 2014 16:16:55)
11/26/14 6:21:22.137 PM networkd[250]: networkd-411 pid 250
11/26/14 6:21:22.140 PM awacsd[251]: InnerStore CopyAllZones: no info in Dynamic Store
11/26/14 6:21:22.194 PM kdc[61]: KDC started
11/26/14 6:21:22.238 PM UserEventAgent[17]: nsurlsessiond_events plugin: adding token 1 for client softwareupdate_download_service
11/26/14 6:21:22.336 PM awacsd[251]: Configuring lazy AWACS client: 109974245.p07.members.btmm.icloud.com.
11/26/14 6:21:22.348 PM discoveryd[49]: Basic BTMMServer Got DNS key from awacsd for 109974245.members.btmm.icloud.com.
11/26/14 6:21:22.353 PM discoveryd[49]: Basic BTMMServer Account info completed for 109974245.members.btmm.icloud.com.
11/26/14 6:21:22.408 PM locationd[55]: locationd was started after an unclean shutdown
11/26/14 6:21:22.442 PM WindowServer[233]: Found 76 modes for display 0x00000000 [76, 0]
11/26/14 6:21:22.446 PM WindowServer[233]: Found 1 modes for display 0x00000000 [1, 0]
11/26/14 6:21:22.448 PM WindowServer[233]: Found 1 modes for display 0x00000000 [1, 0]
11/26/14 6:21:22.449 PM WindowServer[233]: Found 1 modes for display 0x00000000 [1, 0]
11/26/14 6:21:22.451 PM WindowServer[233]: mux_initialize: Couldn't find any matches
11/26/14 6:21:22.461 PM WindowServer[233]: Found 76 modes for display 0x00000000 [76, 0]
11/26/14 6:21:22.483 PM WindowServer[233]: Found 1 modes for display 0x00000000 [1, 0]
11/26/14 6:21:22.483 PM WindowServer[233]: Found 1 modes for display 0x00000000 [1, 0]
11/26/14 6:21:22.484 PM WindowServer[233]: Found 1 modes for display 0x00000000 [1, 0]
11/26/14 6:21:22.490 PM locationd[55]: Location icon should now be in state 'Inactive'
11/26/14 6:21:22.518 PM WindowServer[233]: WSMachineUsesNewStyleMirroring: false
11/26/14 6:21:22.522 PM WindowServer[233]: Display 0x1a492c40: GL mask 0x1; bounds (0, 0)[1920 x 1200], 76 modes available
Main, Active, on-line, enabled, boot, Vendor 469, Model 24b1, S/N 0, Unit 0, Rotation 0
UUID 0x5f28995fa90a8dcf15b9a417c318b0c9
11/26/14 6:21:22.522 PM WindowServer[233]: Display 0x003f0040: GL mask 0x10; bounds (0, 0)[4096 x 2160], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
11/26/14 6:21:22.522 PM WindowServer[233]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
11/26/14 6:21:22.522 PM WindowServer[233]: Display 0x003f003e: GL mask 0x4; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
11/26/14 6:21:22.523 PM WindowServer[233]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[0 x 0], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
11/26/14 6:21:22.524 PM WindowServer[233]: Set a breakpoint at CGSLogError to catch errors as they are logged.
11/26/14 6:21:22.524 PM WindowServer[233]: WSSetWindowTransform: Singular matrix
11/26/14 6:21:22.525 PM WindowServer[233]: WSSetWindowTransform: Singular matrix
11/26/14 6:21:22.525 PM WindowServer[233]: WSSetWindowTransform: Singular matrix
11/26/14 6:21:22.528 PM WindowServer[233]: Display 0x1a492c40: GL mask 0x1; bounds (0, 0)[1920 x 1200], 76 modes available
Main, Active, on-line, enabled, boot, Vendor 469, Model 24b1, S/N 0, Unit 0, Rotation 0
UUID 0x5f28995fa90a8dcf15b9a417c318b0c9
11/26/14 6:21:22.529 PM WindowServer[233]: Display 0x003f0040: GL mask 0x10; bounds (2944, 0)[1 x 1], 2 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 4, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
11/26/14 6:21:22.529 PM WindowServer[233]: Display 0x003f003f: GL mask 0x8; bounds (2945, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
11/26/14 6:21:22.529 PM WindowServer[233]: Display 0x003f003e: GL mask 0x4; bounds (2946, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 2, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
11/26/14 6:21:22.529 PM WindowServer[233]: Display 0x003f003d: GL mask 0x2; bounds (2947, 0)[1 x 1], 1 modes available
off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
UUID 0xffffffffffffffffffffffffffffffff
11/26/14 6:21:22.530 PM WindowServer[233]: CGXPerformInitialDisplayConfiguration
11/26/14 6:21:22.530 PM WindowServer[233]: Display 0x1a492c40: Unit 0; Vendor 0x469 Model 0x24b1 S/N 0 Dimensions 21.50 x 13.86; online enabled, Bounds (0,0)[1920 x 1200], Rotation 0, Resolution 1
11/26/14 6:21:22.531 PM WindowServer[233]: Display 0x003f0040: Unit 4; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2944,0)[1 x 1], Rotation 0, Resolution 1
11/26/14 6:21:22.531 PM WindowServer[233]: Display 0x003f003f: Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2945,0)[1 x 1], Rotation 0, Resolution 1
11/26/14 6:21:22.531 PM WindowServer[233]: Display 0x003f003e: Unit 2; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2946,0)[1 x 1], Rotation 0, Resolution 1
11/26/14 6:21:22.532 PM WindowServer[233]: Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2947,0)[1 x 1], Rotation 0, Resolution 1
11/26/14 6:21:22.552 PM com.apple.xpc.launchd[1]: (com.apple.FileSyncAgent.PHD.isRunning) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
11/26/14 6:21:22.553 PM com.apple.xpc.launchd[1]: (com.apple.mbloginhelper.user) This key does not do anything: OnDemand
11/26/14 6:21:22.553 PM com.apple.xpc.launchd[1]: (com.apple.mbpluginhost.user) This key does not do anything: OnDemand
11/26/14 6:21:22.557 PM com.apple.xpc.launchd[1]: (com.apple.secd) This key does not do anything: OnDemand
11/26/14 6:21:22.557 PM com.apple.xpc.launchd[1]: (com.apple.secd) The ServiceIPC key is no longer respected. Please remove it.
11/26/14 6:21:22.558 PM com.apple.xpc.launchd[1]: (com.apple.speech.speechsynthesisd) This key does not do anything: OnDemand
11/26/14 6:21:22.559 PM com.apple.xpc.launchd[1]: (com.apple.TrustEvaluationAgent) This key does not do anything: OnDemand
11/26/14 6:21:22.562 PM WindowServer[233]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x0000001f, accelerator 0x00003ef3, unit 0, caps QEX|MIPMAP, vram 256 MB
11/26/14 6:21:22.562 PM WindowServer[233]: GLCompositor: GL renderer id 0x01021b06, GL mask 0x0000001f, texture max 16384, viewport max {16384, 16384}, extensions NPOT|GLSL|FLOAT
11/26/14 6:21:22.563 PM WindowServer[233]: GLCompositor enabled for tile size [256 x 256]
11/26/14 6:21:22.563 PM WindowServer[233]: CGXGLInitMipMap: mip map mode is on
11/26/14 6:21:22.607 PM WindowServer[233]: CGXSetDisplayColorProfileAndTransfer: Display 0x1a492c40: Unit 0; ColorProfile { -1113921444 }; TransferFormula (1.000000, 1.000000, 1.000000)
11/26/14 6:21:22.625 PM com.apple.AmbientDisplayAgent[262]: AmbientDisplayAgent started
11/26/14 6:21:22.630 PM com.apple.AmbientDisplayAgent[262]: AMBD initializing devices
11/26/14 6:21:22.636 PM com.apple.AmbientDisplayAgent[262]: AMBD Agent: xpc connection became invalid during event handler
11/26/14 6:21:22.641 PM com.apple.xpc.launchd[1]: (com.apple.AssistiveControl.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
11/26/14 6:21:22.641 PM com.apple.xpc.launchd[1]: (com.apple.btsa) This key does not do anything: OnDemand
11/26/14 6:21:22.643 PM com.apple.xpc.launchd[1]: (com.apple.coreservices.lsactivity) Unknown key for Boolean: DrainMessagesAfterFailedInit
11/26/14 6:21:22.645 PM com.apple.xpc.launchd[1]: (com.apple.helpd) This key does not do anything: OnDemand
11/26/14 6:21:22.650 PM com.apple.xpc.launchd[1]: (com.apple.noticeboard.agent) This key does not do anything: OnDemand
11/26/14 6:21:22.653 PM com.apple.xpc.launchd[1]: (com.apple.speech.speechsynthesisd) This key does not do anything: OnDemand
11/26/14 6:21:22.000 PM kernel[0]: hfs: mounted Recovery HD on device disk0s3
11/26/14 6:21:22.669 PM mds[33]: (Volume.Normal:2464) volume:0x7f7f6180d000 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:(null) occlude:0 /Volumes/Recovery HD
11/26/14 6:21:22.654 PM com.apple.xpc.launchd[1]: (com.apple.inputswitcher.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
11/26/14 6:21:22.654 PM com.apple.xpc.launchd[1]: (com.apple.universalaccesscontrol.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
11/26/14 6:21:22.654 PM com.apple.xpc.launchd[1]: (com.apple.universalaccessd.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
11/26/14 6:21:22.655 PM com.apple.xpc.launchd[1]: (com.apple.UserEventAgent-LoginWindow) This service is defined to be constantly running and is inherently inefficient.
11/26/14 6:21:22.656 PM com.apple.xpc.launchd[1]: (com.apple.VoiceOver.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
11/26/14 6:21:22.657 PM com.apple.xpc.launchd[1]: (com.apple.ZoomWindow.running) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
11/26/14 6:21:22.657 PM com.apple.xpc.launchd[1]: (com.teamviewer.desktop) This service is defined to be constantly running and is inherently inefficient.
11/26/14 6:21:22.775 PM com.apple.SecurityServer[53]: Session 100005 created
11/26/14 6:21:22.857 PM WindowServer[233]: MPAccessSurfaceForDisplayDevice: Set up page flip mode on display 0x1a492c40 device: 0x7fb95bc16740 isBackBuffered: 1 numComp: 3 numDisp: 3
11/26/14 6:21:22.857 PM WindowServer[233]: _CGXGLDisplayContextForDisplayDevice: acquired display context (0x7fb95bc16740) - enabling OpenGL
11/26/14 6:21:22.928 PM configd[25]: network changed.
11/26/14 6:21:22.928 PM configd[25]: setting hostname to "Seans-2011-Mac-Mini.local"
11/26/14 6:21:22.950 PM configd[25]: dhcp_arp_router: en1 SSID unavailable
11/26/14 6:21:23.006 PM loginwindow[67]: The current system was not found in the list of machines requiring a switch to a black background
11/26/14 6:21:23.025 PM com.apple.xpc.launchd[1]: (com.apple.DataDetectorsDynamicData) The JoinExistingSession key is only available to Application services.
11/26/14 6:21:23.026 PM com.apple.xpc.launchd[1]: (com.apple.appkit.xpc.sandboxedServiceRunner) The JoinExistingSession key is only available to Application services.
11/26/14 6:21:23.041 PM loginwindow[67]: Login Window Started Security Agent
11/26/14 6:21:23.070 PM askpermissiond[267]: objc[267]: Class FALogging is implemented in both /System/Library/PrivateFrameworks/FamilyCircle.framework/Versions/A/FamilyCircl e and /System/Library/PrivateFrameworks/FamilyNotification.framework/Versions/A/Famil yNotification. One of the two will be used. Which one is undefined.
11/26/14 6:21:23.097 PM askpermissiond[267]: StoreTransport: Resetting APS Connection using environment name production
11/26/14 6:21:23.104 PM apsd[50]: Unable to bootstrap_look_up connection port 'com.apple.askpermission.aps' for user 0: Unknown service name
11/26/14 6:21:23.170 PM SecurityAgent[278]: This is the first run
11/26/14 6:21:23.170 PM SecurityAgent[278]: MacBuddy was run = 0
11/26/14 6:21:23.203 PM SecurityAgent[278]: User info context values set for seanstoy
11/26/14 6:21:23.000 PM kernel[0]: MacAuthEvent en1 Auth result for: 92:81:d8:d1:65:f5 MAC AUTH succeeded
11/26/14 6:21:23.000 PM kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0
11/26/14 6:21:23.000 PM kernel[0]: AirPort: Link Up on en1
11/26/14 6:21:23.000 PM kernel[0]: en1: BSSID changed to 92:81:d8:d1:65:f5
11/26/14 6:21:23.000 PM kernel[0]: en1::IO80211Interface::postMessage bssid changed
11/26/14 6:21:23.390 PM UserEventAgent[272]: user agent networkd: built Sep 9 2014 16:11:57
11/26/14 6:21:23.457 PM WiFiAgent[273]: securityd_message_with_reply_sync Failed to talk to secd after 4 attempts.
11/26/14 6:21:23.483 PM fseventsd[20]: log dir: /Volumes/Internal Storage Drive/.fseventsd getting new uuid: 13CDA244-CC79-498D-B287-5CAA4C7F080D
11/26/14 6:21:23.496 PM SecurityAgent[278]: Login Window login proceeding
11/26/14 6:21:23.577 PM awacsd[251]: KV HTTP 0
11/26/14 6:21:23.609 PM fseventsd[20]: Logging disabled completely for device:1: /Volumes/Recovery HD
11/26/14 6:21:23.685 PM loginwindow[67]: Login Window - Returned from Security Agent
11/26/14 6:21:23.000 PM kernel[0]: rtR0InitNative: warning! failed to resolve special kernel symbols
11/26/14 6:21:23.000 PM kernel[0]: vboxdrv: fAsync=0 offMin=0xa51 offMax=0xeaf
11/26/14 6:21:23.000 PM kernel[0]: supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
11/26/14 6:21:23.000 PM kernel[0]: VBoxDrv: version 4.3.16 r95972; IOCtl version 0x1a0007; IDC version 0x10000; dev major=33
11/26/14 6:21:23.000 PM kernel[0]: VBoxDrv: Failed to open kernel symbols, rc=-102
11/26/14 6:21:23.907 PM com.apple.xpc.launchd[1]: (com.apple.DataDetectorsDynamicData) The JoinExistingSession key is only available to Application services.
11/26/14 6:21:23.000 PM kernel[0]: hfs: unmount initiated on Recovery HD on device disk0s3
11/26/14 6:21:23.913 PM com.apple.xpc.launchd[1]: (com.apple.FileSyncAgent.PHD.isRunning) The HideUntilCheckIn property is an architectural performance issue. Please transition away from it.
11/26/14 6:21:23.915 PM com.apple.xpc.launchd[1]: (com.apple.mbloginhelper.user) This key does not do anything: OnDemand
11/26/14 6:21:23.915 PM com.apple.xpc.launchd[1]: (com.apple.mbpluginhost.user) This key does not do anything: OnDemand
11/26/14 6:21:23.918 PM com.apple.xpc.launchd[1]: (com.apple.secd) This key does not do anything: OnDemand
11/26/14 6:21:23.918 PM com.apple.xpc.launchd[1]: (com.apple.secd) The ServiceIPC key is no longer respected. Please remove it.
11/26/14 6:21:23.919 PM com.apple.xpc.launchd[1]: (com.apple.speech.speechsynthesisd) This key does not do anything: OnDemand
11/26/14 6:21:23.921 PM com.apple.xpc.launchd[1]: (com.apple.TrustEvaluationAgent) This key does not do anything: OnDemand
11/26/14 6:21:23.972 PM com.apple.audio.DriverHelper[292]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelDevice.
11/26/14 6:21:23.972 PM com.apple.audio.DriverHelper[292]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDRadeonX4000_AMDAccelSharedUserClient.
11/26/14 6:21:23.973 PM com.apple.audio.DriverHelper[292]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class AMDSIVideoContext.
11/26/14 6:21:23.973 PM com.apple.audio.DriverHelper[292]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class Gen6DVDContext.
11/26/14 6:21:23.973 PM com.apple.audio.DriverHelper[292]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelDevice.
11/26/14 6:21:23.973 PM com.apple.audio.DriverHelper[292]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelSharedUserClient.
11/26/14 6:21:23.973 PM com.apple.audio.DriverHelper[292]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMain.
11/26/14 6:21:23.973 PM com.apple.audio.DriverHelper[292]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextMedia.
11/26/14 6:21:23.973 PM com.apple.audio.DriverHelper[292]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IGAccelVideoContextVEBox.
11/26/14 6:21:23.974 PM com.apple.audio.DriverHelper[292]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
11/26/14 6:21:23.974 PM com.apple.audio.DriverHelper[292]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOHIDParamUserClient.
11/26/14 6:21:23.974 PM com.apple.audio.DriverHelper[292]: The plug-in named AirPlay.driver requires extending the sandbox for the IOKit user-client class IOSurfaceRootUserClient.
11/26/14 6:21:23.974 PM com.apple.audio.DriverHelper[292]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.AirPlayXPCHelper.
11/26/14 6:21:23.974 PM com.apple.audio.DriverHelper[292]: The plug-in named AirPlay.driver requires extending the sandbox for the mach service named com.apple.wirelessproxd.
11/26/14 6:21:23.981 PM com.apple.xpc.launchd[1]: (com.apple.appkit.xpc.sandboxedServiceRunner) The JoinExistingSession key is only available to Application services.
11/26/14 6:21:24.002 PM coreaudiod[290]: 2014-11-26 06:21:24.001687 PM [AirPlay] BTLE discovery removing all devices
11/26/14 6:21:24.003 PM coreaudiod[290]: 2014-11-26 06:21:24.003326 PM [AirPlay] Resetting AWDL traffic registration.
11/26/14 6:21:24.004 PM coreaudiod[290]: 2014-11-26 06:21:24.003731 PM [AirPlay] Deregister AirPlay traffic for AWDL at MAC 00:00:00:00:00:00 with target infra non critical PeerIndication=0 err=-3900
11/26/14 6:21:24.006 PM discoveryd[49]: AwdlD2d AwdlD2dStartBrowsingForKey: '_raop' Browsing service started
11/26/14 6:21:24.006 PM discoveryd[49]: AwdlD2d AwdlD2dStartBrowsingForKey: '_airplay' Browsing service started
11/26/14 6:21:24.007 PM com.apple.audio.DriverHelper[292]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the IOKit user-client class IOBluetoothDeviceUserClient.
11/26/14 6:21:24.007 PM com.apple.audio.DriverHelper[292]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.blued.
11/26/14 6:21:24.007 PM com.apple.audio.DriverHelper[292]: The plug-in named BluetoothAudioPlugIn.driver requiresI'm having this same issue. I also have this line in my log, which is curious:
12/14/14 7:13:07.822 PM netbiosd[16766]: Attempt to use XPC with a MachService that has HideUntilCheckIn set. This will result in unpredictable behavior: com.apple.smbd
Is this related to the problem? What does it mean?
My 2010 27" iMac running Yosemite won't wake up from sleep. -
Hi,
I've used the default PHP installation on OSX with no problems in the past (after uncommenting the 2 lines in httpd and enabling Personal Web Sharing), but after a recent reinstallation of the operating system (having re-updated all software) PHP refuses to render. HTML files render fine, but when I load up a PHP file, its source is displayed instead of being properly rendered. I like to think I know what I'm doing, but I'm befuddled :/
Any help would be much appreciated.
Here's my httpd.conf, if it helps:
<pre>
## httpd.conf -- Apache HTTP server configuration file
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:<a class="jive-link-external-small" href="http://">http://httpd.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# /private/etc/httpd/srm.conf and then /private/etc/httpd/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "/usr/local/apache" will be interpreted by the
# server as "/usr/local/apache/logs/foo.log".
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation
# (available at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/mod/core.html#lockfile>);
# you will save yourself a lot of trouble.
ServerRoot "/usr"
# The LockFile directive sets the path to the lockfile used when Apache
# is compiled with either USEFCNTL_SERIALIZEDACCEPT or
# USEFLOCK_SERIALIZEDACCEPT. This directive should normally be left at
# its default value. The main reason for changing it is if the logs
# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
# DISK. The PID of the main server process is automatically appended to
# the filename.
#LockFile "/private/var/run/httpd.lock"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile "/private/var/run/httpd.pid"
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile "/private/var/run/httpd.scoreboard"
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig /private/etc/httpd/srm.conf
#AccessConfig /private/etc/httpd/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
MinSpareServers 5
MaxSpareServers 10
# Number of servers to start initially --- should be a reasonable ballpark
# figure.
StartServers 5
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
MaxClients 150
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For these platforms, set to something like 10000
# or so; a setting of 0 means unlimited.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 0
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file http://httpd.apache.org/docs/dso.html for more
# details about the DSO mechanism and run `httpd -l' for the list of already
# built-in (statically linked and thus always available) modules in your httpd
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.so
#LoadModule vhostaliasmodule libexec/httpd/modvhostalias.so
#LoadModule env_module libexec/httpd/mod_env.so
LoadModule configlogmodule libexec/httpd/modlogconfig.so
#LoadModule mimemagicmodule libexec/httpd/modmimemagic.so
LoadModule mime_module libexec/httpd/mod_mime.so
LoadModule negotiation_module libexec/httpd/mod_negotiation.so
#LoadModule status_module libexec/httpd/mod_status.so
#LoadModule info_module libexec/httpd/mod_info.so
LoadModule includes_module libexec/httpd/mod_include.so
LoadModule autoindex_module libexec/httpd/mod_autoindex.so
LoadModule dir_module libexec/httpd/mod_dir.so
LoadModule cgi_module libexec/httpd/mod_cgi.so
LoadModule asis_module libexec/httpd/mod_asis.so
LoadModule imap_module libexec/httpd/mod_imap.so
LoadModule action_module libexec/httpd/mod_actions.so
#LoadModule speling_module libexec/httpd/mod_speling.so
LoadModule userdir_module libexec/httpd/mod_userdir.so
LoadModule alias_module libexec/httpd/mod_alias.so
LoadModule rewrite_module libexec/httpd/mod_rewrite.so
LoadModule access_module libexec/httpd/mod_access.so
LoadModule auth_module libexec/httpd/mod_auth.so
#LoadModule anonauthmodule libexec/httpd/modauthanon.so
#LoadModule dbmauthmodule libexec/httpd/modauthdbm.so
#LoadModule digest_module libexec/httpd/mod_digest.so
#LoadModule proxy_module libexec/httpd/libproxy.so
#LoadModule cernmetamodule libexec/httpd/modcernmeta.so
#LoadModule expires_module libexec/httpd/mod_expires.so
#LoadModule headers_module libexec/httpd/mod_headers.so
#LoadModule usertrack_module libexec/httpd/mod_usertrack.so
LoadModule logforensicmodule libexec/httpd/modlogforensic.so
#LoadModule uniqueidmodule libexec/httpd/moduniqueid.so
LoadModule setenvif_module libexec/httpd/mod_setenvif.so
#LoadModule dav_module libexec/httpd/libdav.so
#LoadModule ssl_module libexec/httpd/libssl.so
#LoadModule perl_module libexec/httpd/libperl.so
LoadModule php4_module libexec/httpd/libphp4.so
LoadModule hfsapplemodule libexec/httpd/modhfsapple.so
# Reconstruction of the complete module list from all available modules
# (static and shared ones) to achieve correct module execution order.
# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
ClearModuleList
#AddModule modvhostalias.c
#AddModule mod_env.c
AddModule modlogconfig.c
#AddModule modmimemagic.c
AddModule mod_mime.c
AddModule mod_negotiation.c
#AddModule mod_status.c
#AddModule mod_info.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
#AddModule mod_speling.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_rewrite.c
AddModule mod_access.c
AddModule mod_auth.c
#AddModule modauthanon.c
#AddModule modauthdbm.c
#AddModule mod_digest.c
#AddModule mod_proxy.c
#AddModule modcernmeta.c
#AddModule mod_expires.c
#AddModule mod_headers.c
#AddModule mod_usertrack.c
AddModule modlogforensic.c
#AddModule moduniqueid.c
AddModule mod_so.c
AddModule mod_setenvif.c
#AddModule mod_dav.c
#AddModule mod_ssl.c
#AddModule mod_perl.c
AddModule mod_php4.c
AddModule modhfsapple.c
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# If your ServerType directive (set earlier in the 'Global Environment'
# section) is set to "inetd", the next few directives don't have any
# effect since their settings are defined by the inetd configuration.
# Skip ahead to the ServerAdmin directive.
# Port: The port to which the standalone server listens. For
# ports < 1023, you will need httpd to be run as root initially.
Port 80
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
# . On HPUX you may not be able to use shared memory as nobody, and the
# suggested workaround is to create a user www and use that user.
# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
# when the value of (unsigned)Group is above 60000;
# don't use Group "#-1" on these systems!
User nobody
Group nobody
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
#ServerName new.host.name
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/Users/borischerny/Sites"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "/Users/borischerny/Sites">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
<IfModule mod_userdir.c>
UserDir public_html
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.([Hh][Tt]|[Dd][Ss]_[Ss])">
Order allow,deny
Deny from all
Satisfy All
</Files>
# Apple specific filesystem protection.
<Files "rsrc">
Order allow,deny
Deny from all
Satisfy All
</Files>
<Directory ~ ".*\.\.namedfork">
Order allow,deny
Deny from all
Satisfy All
</Directory>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig /private/etc/httpd/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The modmimemagic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# modmimemagic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include modmimemagic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule modmimemagic.c>
MIMEMagicFile /private/etc/httpd/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/private/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "/private/var/log/httpd/access_log" common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog "/private/var/log/httpd/referer_log" referer
#CustomLog "/private/var/log/httpd/agent_log" agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/private/var/log/httpd/access_log" combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# EBCDIC configuration:
# (only for mainframes using the EBCDIC codeset, currently one of:
# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
# The following default configuration assumes that "text files"
# are stored in EBCDIC (so that you can operate on them using the
# normal POSIX tools like grep and sort) while "binary files" are
# stored with identical octets as on an ASCII machine.
# The directives are evaluated in configuration file order, with
# the EBCDICConvert directives applied before EBCDICConvertByType.
# If you want to have ASCII HTML documents and EBCDIC HTML documents
# at the same time, you can use the file extension to force
# conversion off for the ASCII documents:
# > AddType text/html .ahtml
# > EBCDICConvert Off=InOut .ahtml
# EBCDICConvertByType On=InOut text/* message/* multipart/*
# EBCDICConvertByType On=In application/x-www-form-urlencoded
# EBCDICConvertByType On=InOut application/postscript model/vrml
# EBCDICConvertByType Off=InOut /
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
Alias /icons/ "/usr/share/httpd/icons/"
<Directory "/usr/share/httpd/icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# This Alias will project the on-line documentation tree under /manual/
# even if you change the DocumentRoot. Comment it if you don't want to
# provide access to the on-line documentation.
Alias /manual/ "/Library/WebServer/Documents/manual/"
<Directory "/Library/WebServer/Documents/manual">
Options Indexes FollowSymlinks MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "/Library/WebServer/CGI-Executables/"
# "/Library/WebServer/CGI-Executables" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/Library/WebServer/CGI-Executables">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
IndexOptions FancyIndexing
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbreviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage da .dk
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage he .he
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage es .es
AddLanguage sv .sv
AddLanguage cs .cz .cs
AddLanguage ru .ru
AddLanguage zh-TW .zh-tw
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress .Z
AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
#AddType application/x-compress .Z
#AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other-server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your-domain.com" to match your domain to enable.
#<Location /server-status>
# SetHandler server-status
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
#</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your-domain.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
#</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phfabuselog.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phfabuselog.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your-domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "/private/var/run/proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a-domain.com another-domain.edu joes.garage-sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:<a class="jive-link-external-small" href="http://">http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *:80
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *:80>
# ServerAdmin [email protected]
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
</pre>sorry i forgot that... i use php5 so i guessed at the module name... upon looking closer at the conf its mod_php4.c
<pre>
<IfModule mod_php4.c>
AddType application/x-httpd-php .php
</IfModule>
</pre> -
cannot receive or send email from my hotmail account, refuses to verify server. I have changed my password, deleted the account numerous times, any solutions? all on ios 6. it was working up until a few days ago and now refuses to load on both my ipad 2 and iphone 4S
in the process deleted all my contact, very annoying.
all help is much appreciated.
interesting that my gmail account does work perfectly.this may or may not help - but give it a try. On a forum some were reporting that talk21 is now under the yahoo umbrella. below are the steps this use listed. (This was an android forum, but the email settings should be the same. In short it looks like their server names have changed. An existing account may have simply been forwarded - but if you are reinstalling, it may want a clean install to the right servers.) Pay particular attention to the server names and port settings. (this thread was started based on a discussion of Imap vs pop - you are already an Imap person - so ignore that part)
See if this helps.
why settle for pop3, when IMAP works with talk21 and not only does mail get pushed out faster with IMAP, but when you click refresh it will be received faster than pop3. The other advantage is subfolders are also supported with IMAP but cant be seen with POP3. This mail feature works with my android eclair & hero phone and the settings are exactly the same for win mobiles also (not tested). The mail setting up roadmap is the same from what i can remember once in the mail feature for win mobi.
This is what you need to do to setup Talk21 email with IMAP.
Incoming server settings
IMAP server - imap.mail.yahoo.com
Port - 143
Security type - none
Outgoing Server settings
SMTP server - smtp.mail.yahoo.com
Port - 25
Security type - none Also important note - Enable 'require sign-in'
and enter your talk21 username and password The End...works a treat for me p.s. Its only taken me 3 years to work it out with win mobile and recently with android. Finally got it to work...hope this helps all the talk21 users out there. if there are any other similar posts out there with no answer...dont forget to mention my name when passing this post around. -
When I try to log in from desktop I get "Connection Refused" message. How do I fix this?
I tried to activate Mozilla Firefox today using the normal & routine method, clicking on the Firefox Icon.
Each time I tried I got the same message "Connection Refused".
I went to the Firefox site and read the message regarding disabling Java, so I opened ADD ONS and Plug Ins and disabled Java.
Still no change, so I shut down and restarted my computer.
I keep getting the same Connection Refused message.
What needs to be done to restore Firefox?Another user also reported a problem with the AT&T Yahoo home page in the past few minutes. When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
(1) Bypass Firefox's Cache
Use Ctrl+Shift+r to reload the page fresh from the server.
Alternately, you also can clear Firefox's cache completely using:
orange Firefox button (or Tools menu) > Options > Advanced
On the Network mini-tab > Cached Web Content : "Clear Now"
If you have a large hard drive, this might take a few minutes.
(2) Remove the site's cookies (save any pending work first). While viewing a page on the site:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help? -
Connection refused when trying to getOutputStream from https connection
Hi all !
I want to make an https connection with a server to send/get the request/response
What can be the cause of the following error in the following code testHttps.java?
java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Unknown Source)
at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.connect(Unknown Source)
at com.sun.net.ssl.internal.ssl.BaseSSLSocketImpl.connect(Unknown Source)
at sun.net.NetworkClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.<init>(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.New(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.getNewHttpClient(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getOutputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getOutputStream(Unknown Source)
at Test.testHttps.main(testHttps.java:46)
Exception in thread "main" java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Unknown Source)
at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.connect(Unknown Source)
at com.sun.net.ssl.internal.ssl.BaseSSLSocketImpl.connect(Unknown Source)
at sun.net.NetworkClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.<init>(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.New(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.getNewHttpClient(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at Test.testHttps.main(testHttps.java:51)
testHttps.java
package Test;
import java.io.;
import java.net.;
import javax.net.ssl.*;
public class testHttps {
public static void main(String args[]) throws Exception {
//System.setProperty("java.protocol.handler.pkgs", "com.sun.net.ssl.internal.www.protocol");
// Create a trust manager that does not validate certificate chains
TrustManager[] trustAllCerts = new TrustManager[]{
new X509TrustManager() {
public java.security.cert.X509Certificate[] getAcceptedIssuers() {
return null;
public void checkClientTrusted(
java.security.cert.X509Certificate[] certs, String authType) {
public void checkServerTrusted(
java.security.cert.X509Certificate[] certs, String authType) {
// Install the all-trusting trust manager
try {
SSLContext sc = SSLContext.getInstance("SSL");
sc.init(null, trustAllCerts, new java.security.SecureRandom());
HttpsURLConnection.setDefaultSSLSocketFactory(sc.getSocketFactory());
} catch (Exception e) {
System.out.println("Error" e);
// Now you can access an https URL without having the certificate in the truststore
try {
URL url = new URL("https://..............");-->//address of the server given here
URLConnection conn = url.openConnection();
HttpsURLConnection urlConn = (HttpsURLConnection) conn;
urlConn.setDoOutput(true);
OutputStreamWriter wr = null;
try{
wr = new OutputStreamWriter(conn.getOutputStream());
catch(Exception e){
e.printStackTrace();
BufferedReader in = new BufferedReader(new InputStreamReader(urlConn.getInputStream()));
String str;
while( (str=in.readLine()) != null) {
System.out.println(str);
} catch (MalformedURLException e) {
System.out.println("Error in SLL Connetion" +e);
HostnameVerifier hv = new HostnameVerifier()
public boolean verify(String urlHostName, SSLSession session)
System.out.println("Warning: URL Host: " urlHostName " vs. "
session.getPeerHost());
return true;
want to ignore certificate validation.
plese help me..
hi brucechapman, as you suggested me, i posted in Core API- networking forum, now please gimme a solution
Thanks in advance.hi brucechapman,
ran the NetTest program, got the following exception:
trigger seeding of SecureRandom
done seeding SecureRandom
Exception in thread "main" java.net.ConnectException: Connection refused: connect
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(Unknown Source)
at java.net.PlainSocketImpl.connectToAddress(Unknown Source)
at java.net.PlainSocketImpl.connect(Unknown Source)
at java.net.SocksSocketImpl.connect(Unknown Source)
at java.net.Socket.connect(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.connect(Unknown Source)
at com.sun.net.ssl.internal.ssl.BaseSSLSocketImpl.connect(Unknown Source)
at sun.net.NetworkClient.doConnect(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.http.HttpClient.openServer(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.<init>(Unknown Source)
at sun.net.www.protocol.https.HttpsClient.New(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.getNewHttpClient(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(Unknown Source)
at sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(Unknown Source)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
at sun.net.www.protocol.https.HttpsURLConnectionImpl.getInputStream(Unknown Source)
at java.net.URL.openStream(Unknown Source)
at Test.NetTest.main(NetTest.java:40)
NetTest.java:40 -- InputStream is = url.openStream(); at this ling throwing exception.
For the following program, i have added the argument -Djavax.net.ssl.trustStore=cacerts
i have exported the certificate from IE and added to the keystore.
import java.io.BufferedReader;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.OutputStreamWriter;
import java.security.Security;
import javax.net.ssl.SSLSocket;
import javax.net.ssl.SSLSocketFactory;
public class Communicator {
public static void main(String[] args) {
try {
int port = 34443;
String strReq = "xml content ";
Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
SSLSocketFactory factory = (SSLSocketFactory) SSLSocketFactory.getDefault();
SSLSocket socket = (SSLSocket) factory.createSocket("jyoti-win2k8-32", port);
//Writer out = new OutputStreamWriter(socket.getOutputStream());
//out.write("GET http://" + "hostname" + "/ HTTP 1.1\r\n");
// out.write("\r\n");
//out.write(strReq);
//out.flush();
OutputStreamWriter wr = null;
try{
wr = new OutputStreamWriter(socket.getOutputStream());
catch(Exception e){
e.printStackTrace();
System.out.println("got output stream");
try{
wr.write(strReq);
//System.out.println("response code : "+conn.getResponseCode());
System.out.println("written");
wr.flush();
catch(IOException e){
e.printStackTrace();
InputStreamReader is = new InputStreamReader(socket.getInputStream(),"UTF8") ;
BufferedReader rd = new BufferedReader(is);
String line;int count=0;
System.out.println("rd "+rd);
while ((line = rd.readLine()) != null) {
System.out.println("line "+line );
System.out.println(count++);
// Process line...
System.out.println(count);
rd.close();
BufferedReader in = new BufferedReader(new InputStreamReader(socket.getInputStream()));
int c;
while ((c = in.read()) != -1) {
System.out.write(c);
//out.close();
in.close();
socket.close();
} catch(IOException ex) {
ex.printStackTrace();
Exception :
javax.net.ssl.SSLException: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.fatal(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.handleException(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.handleException(Unknown Source)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(Unknown Source)
at sun.nio.cs.StreamEncoder.writeBytes(Unknown Source)
at sun.nio.cs.StreamEncoder.implFlushBuffer(Unknown Source)
at sun.nio.cs.StreamEncoder.implFlush(Unknown Source)
at sun.nio.cs.StreamEncoder.flush(Unknown Source)
at java.io.OutputStreamWriter.flush(Unknown Source)
at Test.Communicator.main(Communicator.java:55)
Caused by: java.lang.RuntimeException: Unexpected error: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at sun.security.validator.PKIXValidator.<init>(Unknown Source)
at sun.security.validator.Validator.getInstance(Unknown Source)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.getValidator(Unknown Source)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
at com.sun.net.ssl.internal.ssl.X509TrustManagerImpl.checkServerTrusted(Unknown Source)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.serverCertificate(Unknown Source)
at com.sun.net.ssl.internal.ssl.ClientHandshaker.processMessage(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.processLoop(Unknown Source)
at com.sun.net.ssl.internal.ssl.Handshaker.process_record(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(Unknown Source)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.writeRecord(Unknown Source)
... 7 more
Caused by: java.security.InvalidAlgorithmParameterException: the trustAnchors parameter must be non-empty
at java.security.cert.PKIXParameters.setTrustAnchors(Unknown Source)
at java.security.cert.PKIXParameters.<init>(Unknown Source)
at java.security.cert.PKIXBuilderParameters.<init>(Unknown Source)
... 19 more
java.net.SocketException: Socket is closed
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.getInputStream(Unknown Source)
at Test.Communicator.main(Communicator.java:66)
please help me and provide me suggestion/solution. how to get rid off this trustanchor paramater exception
what is it actualy?
Thanks in advance. -
I have a 2008 iMac 21.5" using 10.6.8 Snow Leopard with VM Ware 4.1.3 supporting Windows 7. Initially ML OSX refused to install due to Back up on HD which I removed to trash.It then proceeded but froze up in the initial stages with 33 mins remaining. I was lucky enough to quit and restart using 10.6.8. With all the problems on this chat line, it appears it may be best to leave Mountain Lion well alone, and cut losses rather than tempt fate.Has anybody anything positive to say or help with?
Welcome to Apple Communities
1. Open Disk Utility and repair permissions
2. Open Finder, go to your user's folder > Library > Caches and delete everything
3. Verify disk
4. See if your apps are compatible with OS X 10.8 > http://www.roaringapps.com
You can also do a backup and create a DVD or USB drive to install OS X > http://arstechnica.com/apple/2012/07/how-to-create-a-bootable-backup-mountain-li on-install-disk/ When you start in 10.8 installer, open Disk Utility, select your volume and erase the drive, and install -
Mail refuses to download attachments to where I want them.
Although I've set Mail to download attachments to my desktop, it refuses to do this and downloads them into a thing called "Mail Downloads" in my Library folder.
What am I doing wrong here?Thomas:
Can you please provide guidance on where the Mail Downloads folder is actually located? I'm now running Mail (v 5.3) on a new MBA under Lion 10.7.4 - but am totally unable to find that folder.
Thanks
Jim -
I use PaleMoon now trying to get rid of advertising sharks. I have WINXP still - need assistive-technology computer for pain so taking time on getting new computer.
I have been severely sabotaged by advertising conglomerates selling my private information. They have no right -yet they do whatever they want. Anyhow...I've tried to OPT-OUT of EVERYTHING POSSIBLE. I've tried 5 places found. Google, NAI, DAA, & FIREFOX HELP said go to about:config was instructed to turn "from false to true" the "privacy.tracking.protection.enabled" .But I couldn't keep this setting because this also has to be set to false to use any saved log-on's to my accounts., and add-on AD BLOCK PLUS 2.6.7 when I was on Firefox & had some ticks and now it is disabled because it won't work with PaleMoon 25.2.1
This case is about GOOGLE OPT-OUT. Starting here: http://www.google.com/settings/ads?hl=en&sig=ACi0TCgWymel0CNWxdcnEWPzWNs9wDd7cVQHxHsmtz4w30CAyHk7MqyzzZdGh3m6FpDaJsKmunTLEvJZY5LAm3h6gIdzE30L-Q
There are 2 columns. The left one "ADS ON GOOGLE" NEVER RETAINS AFTER LOG-OFF. The right column "Google ads across the web
" seems to retain sometimes - if I remember right it falls off after a period of time as opposed to after just LOGGING-OFF. Below the columns there are options, but I don't have a GOOGLE ACCOUNT.
Also down there is this link: https://support.google.com/adsense/troubleshooter/1631343?hl=en ...you see the box with this: Advertising industry program participation
Google is a participating member of groups that have developed industry privacy standards like the Ad-Choices icon for online advertising.
Group Location
Network Advertising Initiative United States
Digital Advertising Alliance (DAA) United States
European Digital Advertising Alliance Europe
Digital Advertising Alliance of Canada Canada
....I clicked OPTED OUT FOR NAI on their link http://www.networkadvertising.org/
...I clicked OPTED OUT FOR DAA on their link http://www.aboutads.info/
...I clicked PROTECT MY CHOICES and downloaded the app.
These 1st 2 links used to have the same trouble and didn't retain ANYTHING and wouldn't re OPT-OUT ANY UNTIL THEY WERE SATIATED - saying I didn't have 3rd party cookies allowed when I did - this took hours.
I sent numerous trouble reports to them that they ignored - then I think I sent one to Firefox and it is much better but still not completely right. Today DAA retains 106 out of 122 and if I repeatedly RE-OPT-OUT successively I can get it to 121 out of 122 - never completely. (currently the one not taking is Accuen Inc. but it changes periodically - makes me think they set one up to take my info and then share it with all of them - lol )
Same for NAI currently I started with 94 out of 96 - next re-OPTED-OUT got it to 95 out of 96 and no further and same co. Accuen Inc (accuenmedia.com ) wouldn't update.
NOTE: I was copy/pasting the list of NON-OPT-OUT'S to them and my own document file to try and find trends/problems...now NAI programmers protected the list from being able to be COPIED AND PASTED!!! That's the opposite of being open and interested in making this work, right? Why would they want to allow us to OPT-OUT of their criminal espionage behavior...RIGHT? (lol) FYI: I recorded that the big one that was always retained before this one was...MEDIA MATH INC.
MANY Opt-outs would drop off while on-line and ALL would drop-off once logged-off. Now it's retaining most once logged off - but it hasn't been long enough to tell if they'll fall back into their bad habits as they've done before...
This has been going on forever for me - I've been reporting this malfunction since 2013.
Of course I downloaded PROTECT MY CHOICES FOR FIREFOX via NAI AND DAA'S links ...http://www.aboutads.info/PMC#protect-your-choices-for-firefox ............they both go to the same place???.....PROTECT MY CHOICES http://www.aboutads.info/plugin/install/firefox....that seems odd...it's as if they are the same entity then. ABOUTADS is DAA'S WEBSITE. NAI'S IS NETWORKADVERTISING.ORG so why would NAI use DAA'S PROTECT MY CHOICES app?
Lastely, I also requested that the COOKIES NAMES BE UNIFORMLY IDENTIFIABLE. All the OPT-OUT COOKIES that are to be forevermore retained on my computer and that I am to trust the EVERY FUNCTION OF - well they all have different COOKIE NAMES!! Most of the names you can not tell that they are OPT-OUT COOKIES!! - SO NOWWW They have created another problem.
We can no longer just "DELETE ALL COOKIES".
PLUS, we can no longer go through our cookies and delete individual ones that snuck through.
Every one of the OPT-OUT COOKIES SHOULD SAY "OPT-OUT" IWITHIN THEIR NAME OF THEIR COOKIE - PERIOD. RIGHT? (LOL) For real. Why was this mess was allowed?
REALLY IN MY OPINION THESE COMPANIES SHOULD BE BLOCKED AT THE LOCAL PHONE COMPANIES LEVEL - IN OUR SERVERS. We should not have to deal with them. Same thing with viruses, malware and such beasts. But I digress.
In summary:
1.)Google Analytics OPT-OUT Browser Add-on 0.9.6 doesn't retain OPT-OUT settings
2.) JAVA refuses to create updates for WinXP/FireFox/PaleMoon.
3.) DAA & NAI still don't retain ALL OPT-OUT settings and never completely OPT-OUT all companies.
4.) OPT-OUT cookies should be uniformly names with the words OPT-OUT in their titles.
5.) Ad Block Plus 25.6.7 doesn't work for Pale Moon and there is no alternative - (didn't work great in FireFox)
Right now I'm mainly interested in #1)retaining my GOOGLE OPT-OUTS while on line AND while logged off since it is attacking my computer and steeling all the speed until it freezes my keyboard.
Currently I am trying to remember to run through 3. OPT-OUTS every time I log on.
Thanks so much!hello, palemoon's support forums are here: http://forum.palemoon.org/
-
I couldn't get downloads from iTunes to be on the desktop of my Macbook air but they remain in iTunes folder and refuse to open for use. What am I to do?
Downloads of what? Songs? Apps? Books?
If you're talking about apps, then you have downloaded iOS apps which are intended to run on an iPhone or iPad, not a Mac. -
4-year period expired on 12-th of December.
I have applied to an official Apple service on 4th of December with this problem with nvidia-8600 chip that was confirmed by the official Aplpe service.
I have a document that confirms the purchase date.
It was sent to Apple by the official service and they refused.
What we have is that Apple does not respond to obligations and all it declares can be considered as lie.The details:
Repair Confirmation Number: G141323406
Serial Number: W8******YJX
Reason for cancellation: Part is out of range, It does not qualify for quality program.
<Edited By Host> -
My HP Officejet Pro 8100 printer refuses to print in color
My HP Officejet Pro 8100 printer refuses to print in color, I have a macbook OSX 10.7. for some reason it will not print in color and I do not know what to do. please help.
Ctopkis, Make sure you have updated your firmware. Here is the link to the lastest firmware that was posted on 02-18-2012.
Firmware upgrade is for HP Officejet Pro 8100 ePrinter - N811a
Post back and let me know if this fixes the issue or not.
-Sean
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
I purchased a movie on apple tv. I then went to my pc and clicked "check for available downloads", but the movie is not there. I don't have enough storage to put the movie on icloud, and i refuse to pay for more storage to move something that i already paid for. any suggestions?
It looks like the answer is to log out of iTunes and then back in. That allowed Rentals to show up in my Movies Library. I rebooted about three times which didn't work. I closed the application and restarted it many times which didn't work.
The solution was to log out of my username and then back in. That worked.
iTunes Bug. -
Problems with SSH: Connection Refused
Greetings fellow Arch users,
I have hit a bit of a snag that I could really use some extra help getting around. I've tried everything I can think of (and everything that Google thought might work) and I have my back rather against a wall, so I thought I'd come here to see if anyone can offer some advice.
To make a long story short, I am a college student and am attempting to set up an ssh server on a desktop at my house so I can access it remotely from the college. I have the computer set up and the server running, however I am having difficulty making connections to it from my laptop. I know that the server is running, because I can log into it both from the server itself (sshing into local host) and from my laptop when I use the internal IP address.
The server is on a static IP address within the network(192.168.0.75), and my router is configured to forward TCP port 1500 to it (I'm using 1500 as the port for my ssh server). However, when I attempt to log into the ssh server using my network's external IP address, the connection is refused. I used nmap to scan my network and found that, even though the proper ports are forwarded to the proper place as far as my Router's configuration interface is concerned, port 1500 is not listed as one of the open TCP ports. I also, to test it, temporarily disabled the firewalls on both the server and the client. That didn't help. The command that I am running is:
ssh -p 1500 douglas@[external ip address
As I am really not sure what is causing this problem, I don't know what information to provide. So here is everything that my inexperienced mind sees as likely being important. If you need anything more, let me know and I will do my best to provide it.
Here is the sshd_config file from my server.
# This is the sshd server system-wide configuration file. See
# sshd_config(5) for more information.
# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented. Uncommented options override the
# default value.
Port 1500
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::
# The default requires explicit activation of protocol 1
#Protocol 2
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024
# Ciphers and keying
#RekeyLimit default none
# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO
# Authentication:
#LoginGraceTime 2m
PermitRootLogin no
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10
#RSAAuthentication yes
#PubkeyAuthentication yes
# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
# but this is overridden so installations will only check .ssh/authorized_keys
AuthorizedKeysFile .ssh/authorized_keys
#AuthorizedPrincipalsFile none
#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes
# To disable tunneled clear text passwords, change to no here!
#PasswordAuthentication yes
#PermitEmptyPasswords no
# Change to no to disable s/key passwords
ChallengeResponseAuthentication no
# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no
# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication. Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
UsePAM yes
#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding no
#X11DisplayOffset 10
#X11UseLocalhost yes
PrintMotd no # pam does that
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
UsePrivilegeSeparation sandbox # Default for new installations.
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none
# no default banner path
#Banner none
# override default of no subsystems
Subsystem sftp /usr/lib/ssh/sftp-server
# Example of overriding settings on a per-user basis
#Match User anoncvs
# X11Forwarding no
# AllowTcpForwarding no
# ForceCommand cvs server
The ouptut of ip addr when run on the server:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp8s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 00:21:9b:3a:be:94 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.75/24 brd 192.168.255.0 scope global enp8s0
valid_lft forever preferred_lft forever
inet6 fe80::221:9bff:fe3a:be94/64 scope link
valid_lft forever preferred_lft forever
Here is the output from running nmap on the network:
Starting Nmap 6.40 ( http://nmap.org ) at 2013-09-28 21:05 EDT
Initiating Ping Scan at 21:05
Scanning address [2 ports]
Completed Ping Scan at 21:05, 0.01s elapsed (1 total hosts)
Initiating Parallel DNS resolution of 1 host. at 21:05
Completed Parallel DNS resolution of 1 host. at 21:05, 0.05s elapsed
Initiating Connect Scan at 21:05
Scanning pa-addresss.dhcp.embarqhsd.net (address) [1000 ports]
Discovered open port 80/tcp on address
Discovered open port 443/tcp on address
Discovered open port 23/tcp on address
Discovered open port 21/tcp on address
Completed Connect Scan at 21:05, 4.08s elapsed (1000 total ports)
Nmap scan report for pa-address.dhcp.embarqhsd.net (address)
Host is up (0.036s latency).
Not shown: 995 closed ports
PORT STATE SERVICE
21/tcp open ftp
23/tcp open telnet
80/tcp open http
443/tcp open https
8080/tcp filtered http-proxy
Read data files from: /usr/bin/../share/nmap
Nmap done: 1 IP address (1 host up) scanned in 4.19 seconds
Here is the ssh_config client-side:
# $OpenBSD: ssh_config,v 1.27 2013/05/16 02:00:34 dtucker Exp $
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for
# users, and the values can be changed in per-user configuration files
# or on the command line.
# Configuration data is parsed as follows:
# 1. command line options
# 2. user-specific file
# 3. system-wide file
# Any configuration value is only changed the first time it is set.
# Thus, host-specific definitions should be at the beginning of the
# configuration file, and defaults at the end.
# Site-wide defaults for some commonly used options. For a comprehensive
# list of available options, their meanings and defaults, please see the
# ssh_config(5) man page.
# Host *
# ForwardAgent no
# ForwardX11 no
# RhostsRSAAuthentication no
# RSAAuthentication yes
# PasswordAuthentication yes
# HostbasedAuthentication no
# GSSAPIAuthentication no
# GSSAPIDelegateCredentials no
# BatchMode no
# CheckHostIP yes
# AddressFamily any
# ConnectTimeout 0
# StrictHostKeyChecking ask
# IdentityFile ~/.ssh/identity
# IdentityFile ~/.ssh/id_rsa
# IdentityFile ~/.ssh/id_dsa
# Port 22
Protocol 2
# Cipher 3des
# Ciphers aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc
# MACs hmac-md5,hmac-sha1,[email protected],hmac-ripemd160
# EscapeChar ~
# Tunnel no
# TunnelDevice any:any
# PermitLocalCommand no
# VisualHostKey no
# ProxyCommand ssh -q -W %h:%p gateway.example.com
# RekeyLimit 1G 1h
Output of ssh -v during connection attempt:
OpenSSH_6.3, OpenSSL 1.0.1e 11 Feb 2013
debug1: Reading configuration data /home/douglas/.ssh/config
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to address [address] port 1500.
debug1: connect to address address port 1500: Connection refused
ssh: connect to host address port 1500: Connection refused
Thank you guys ahead of time. Getting this server operational is hardly critical, it is just a side project of mine, but I would really like to see it working.
Douglas Bahr Rumbaugh
Last edited by douglasr (2013-09-29 02:58:56)Okay, so I finally have the opportunity to try and log in from a remote network. And. . . it doesn't work. Which is just my luck because I now need to wait an entire week, at least, before I can touch the server again. Anyway, running ssh with the maximum verbosity I get this output:
douglas ~ $ ssh -vvv -p 2000 address
OpenSSH_6.3, OpenSSL 1.0.1e 11 Feb 2013
debug1: Reading configuration data /home/douglas/.ssh/config
debug1: Reading configuration data /etc/ssh/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to address [address] port 2000.
debug1: connect to address address port 2000: Connection timed out
ssh: connect to host address port 2000: Connection timed out
It takes a minute or two for the command to finish with the connection timeout, as one would expect. And yes, I am reasonably sure that the address that I am using is my home network's external IP. It is dynamic, but I checked it before I left which was just over an hour ago. I guess that it may have changed. I'll know that for sure in the morning, when my server sends me an automatic email with the network's current address. In the meantime I am operating under the assumption that the address I am using is correct. What else could be the problem? -
Some Apple Loops refuse to index when dropped onto the Loop Browser
I'm hoping somebody has a fix for this odd problem. Some of the Apple Loops which came with version 1.0.1 refuse to index via the loop browser.
First off, I had to re-install GarageBand 1.0.1 after an invalid library error message appeared after upgrading to Tiger. The re-install wasn't completed totally and it did the same thing on 2 attempts. The next error message was: Apple Loops are missing, or something to that effect. I had to install the Apple Loops found in HD->Library->Application Support->GarageBand by dropping them onto the GarageBand Loop Browser at the bottom of its window. It indexed them, they appeared, and I was happy.
Today, for some reason, I looked through the loops folder mentioned above and noticed about one third of the loops do not appear in the Loop Browser, naturally some really neat stuff is missing! So I decided to drag & drop these Apple loop files onto the browser individually. It says it's indexing them, althought the guitar icon in the dock jumps while doing so, but they never appear and don't show-up in the search box either. They can however be dropped onto the Timeline from the Finder and will play as a music file. The problem is that I cannot listen to them from the loop browser for easy selecting when arranging.
Is there any way to get these stubborn Apple files to appear & play in the Loop Browser? I was hoping they could be added via the Timeline to the Loop Browser, but have had no success. Also, I tried the Apple Loops Utility thinking maybe the appropriate tags were missing, but can't figure out what is missing, if anything.
Thanks in advance for your help.
Barb
iMac G5 20 Mac OS X (10.4.4)The Loop Browser filters what it displays by only showing loops in the same Time Signature as the song you've created, and within 2 semitones of the Key your song is in.
You can change the latter by tuning off Keyword Browsing in GB's preferences.
--HangTime [Will Compute for Food] B-|>
Maybe you are looking for
-
Creation of custom BAPI for FB02
Hi Guys, I want to create custom BAPI to update FB02 and for my requirement i found there is no standard BAPI available since i need to update lot of other fields in FB02 that is the reason, i want to use CALL TRANSACTION inside the BAPI to update FB
-
URGENT problem - please help me now
Hello, I am learning Java at college, but when I try to do it at home on my computer I get an error. Can someone please help me as I need to do my coursework very soon and I'm not very good with gadgets and things. The error is like this: I type this
-
Converting a multipage pdf to a multipage jpeg in acrobat pro x
I was wondering if anyone has any tips on how to convert a single multipage pdf into a single multipage jpeg in acrobat pro x. Thanks
-
This doesn't belong here, but there doesn't seem to be a thread for it.
I ordered a macbook. I discovered that there is a required signing upon delivery. I will not be home for the delivery, I do not have a printer, and I do not have someone to sign for me. I am trying to change the shipping address to store pick-up, but
-
Which is better? Install Microsoft Office as part of an image or do a post install?
I've always kept Office as part of the image as I thought it would decrease the total time for deployment. Is it better to deploy it as a post install application?