Reg 0MAT_ATTR ,0MAT_ATTR(Class 200),0MAT_ATTR(001)

Dear BW Gurus,
Regards.We have generated Classification Characterisitcs Info Objects (CTBW and CTBW_META)----
(1) 0MATERIAL_ATTR(Class200) (2) 0MATERIAL_ATTR(Class 001) ((basis ds -0MATERIAL)) ,(3) 0PRODORDER_ATTR(Class 022) ((Basis DS -0PRODORDER_ATTR)).. Now am confused on how to map these CTBW info objects to 0material_attr info object!!!The OSS Note(306046)suggests to use these as Navigation attributes to 0material_attr..If thats the case,can i use them above 3 ctbw info objects as ATTRIBUTES to 0material_attr?? Its really urgent and i would really appreciate ur help at this time.
manythanks
arun
(would assign points for sure)

Hello guys any light on this????
manythanks

Similar Messages

PLANNED ORDER CREATION FROM SALES ORDER SAVING (REQUIREMENT CLASS 200)

Dear All,
By using requirement class 200, assembly type 4 (dinamic planned order) Iwould like that at sales order registration the planned order for the sales order material is created.
I have two problems.
The system doesn't schedule the planned order, even if the scheduling parametres are entered for planned order type (relation between routing id and planned order type).
So I have a planned order in which i have to manually schedule it.
The second problem is that the planned order is firmed at creation. I would like that it was not firmed to adjust by MPS procedure the components from BOM modification. Infact at the creation of the sales order The complete BOM is not defined, and I don't want to unfirm the planned order so run th mps procedure.
Can anyone answer to these questions?
Thank's in advance
Luca Pastura

Hi Luca Pastura,
For Scheduling
1. You need to Give the appropriate check mark ( 1 or 2 ) In the capccity check of the requirement class configuration (ovzg)
For Firming
1. Since youare using dyanamic processing ""During dynamic assembly processing, you can not change the quantities and deadlines"
2. kindly refer the F1 help for the assembly type inthe OVZG.
Check and confirm
Reg
Dsk
1.

Class 200 in variant configuratin

Dear all
Wht is a use of class 200 in variant configuratin ? how it will work ?
Plz give me detail with example .
I have already read a SAP LAB.

Hi Surendra
Class 200 is used in components of the variant material.
For creating a superbom you can use object dependencies or Classes instead of components with item category "K".
You can create a class of class type 200 and assign it to the materials in material master which will be used as bom components in the Super Bom.
For Example
You have a variant product such as Car.
and it has got components shuch as Blue body, Black body , Red Body.
Instead of putting it as different line item you put class item in the bom and put the color class of class type 200
If you have further queries do let me know.
Thanks N Regards,
Hitendra Dwivedi.

Variants class 200 and 300

what are the differences between the variant classes 200 and 300.
where we have to select 200 class and where we have to select 300 class in variant configuration.
thanking you
srinivas pai

Thanks for marking thread useful.
Class 300 and 200 are both defined for the materials.class 300 is mainly used for a variant material used for variant configurartion.We can also classify materials under class 200 which do not have to be configurable materials.But allows to use the defined characteristics and restrict the usage for a specific purpose..
Please check below threads
http://scn.sap.com/thread/631073
https://scn.sap.com/thread/576848
Yes you can copy class and create your new class .
can you please share your business requirement, what kind of solution your are budiling with this?
Thanks
Ritesh

Difference between class 200 and 300

Experts,
Can i use class 200 for varient configuration?
I want to know difference between class 200 and 300 , are this same?
Appriciate help.
Tom

Thanks for marking thread useful.
Class 300 and 200 are both defined for the materials.class 300 is mainly used for a variant material used for variant configurartion.We can also classify materials under class 200 which do not have to be configurable materials.But allows to use the defined characteristics and restrict the usage for a specific purpose..
Please check below threads
http://scn.sap.com/thread/631073
https://scn.sap.com/thread/576848
Yes you can copy class and create your new class .
can you please share your business requirement, what kind of solution your are budiling with this?
Thanks
Ritesh

Class 200

when, where and how class type 200 is used in variant configuration. please help me with the entire process step by step .
NOTE : Iam not looking for 300

Dear John
All the settings in Customizing you require for assembly processing with planned orders are already predefined by SAP. These settings include, for example, the strategy group and the requirements class. The settings in the system standard allow the planned order to be converted into a production order and in Repetitive Manufacturing it can be used as a run schedule quantity.
<b>Strategy Group</b>
The following strategy group is predefined for planned orders:
Strategy group 81: assembly processing with planned orders
Here, the dynamic procedure (that is, the loose link between planned order and sales order) is preset as the assembly type.
<b>Requirements Type and Requirements Class</b>
Strategy group 81 refers to the following requirements type or requirements class in the Standard System:
requirements type KMSE
requirements class 200
Thanks
G. Lakshmipathi

Reg : information Regarding Class Cl_HTTP_Ext_CSIF

Hi floks,
i requested you any body having documentation or links regarding class CL_HTTP_EXT_CSIF . How is it works and need more information this class . Can any body helpout .
thanks,
Suresh

Hi Suresh,
just check out the following link.
http://help.sap.com/saphelp_nw04/helpdata/en/d0/590c421c7f11d5991d00508b6b8b11/content.htm
Regards,
Prajith

Reg Release startegy, Class n characeristics

Hi
This is regarding PO release strartegy
I setup Release strategy for PO's in Development system, for each release startegy allowed characteristic values are mentioned during config as expected
I released transport to quality [we have 2 systems
1. In One quality system i forgot to maintain classes, i maintained class, but still i am getting error 'Error in classification (class 032 class type 032)'
2. in another quality system class and characteristics are maintained before releasing transport. when i see SPRO, system hasnt assigned allowed characteristics values for each release startegy? why?
Do i need to perform any thing else other than creating characteristics and classes?
What task should i b doing in target system
Thanks in advance

Thank you
i understood exept 'donot open the client in quality and assign the values' what does this mean ?
I am doing CL20N in quality only ?
i understood in Qulity[target sytem]i must perform below
--> create characteristics
--> create class and assign characteristics
--->CL20N assign allowed characteristic values for each release startegy

How to transfer classification data (class type 001) in ecc to crm

Hi. dear
I have a problem in transfering classification data (class type 001). we use classification data in material (mm01) in ecc, class type is 001, but now I have to transfer the classification data to crm.
i had downloaded the CLASS,ATTRIBUTE and OBJCL,MATERIAL,but i don't see classification data in crm.
please let me konw :
(1) how can i transfer classification data (class type 001) to crm.
(2)how can i see these data in crm
thanks
zong

first, very thanks , i had seen the note 428989, but, i wonder if there are other method to resovle the problem.
In ecc, the classification data have many charicter ,but ,in crm, how can i display the classification data . in product data,of crm, i cannot see any tab to display the data. what can i do in crm to display the classification data.

200 and 300 classes

class type 300 is a variant class
and class type 200 is a class node.
what is the difference between these two.
where do ve use them.
and wherre does they differ?

Dear,
Class 200 is used in BOM as a class item. when you create a class, in the additionla data tabpage, if you delare it as can be used in BOM, then you can use this class item in BOM. Assign all the materials to the class in classification view so that the materials assign to this class are acts as a BOM items.
Class 300 is used to delare the material as variant configuation material with class and char. With class 300 and config profile we can control the behaviour of process in Sales order.
What I explained is in nutshell the apllication part. Please let us know if ypu need more help.

Class type 001 - Changing validity date

I need to change validity date of all classes of type 001.
There are more than 5000 classes for this type.
How can I do a mass change for this?
Please advice.
Thanks,

do it with LSMW

Variant configuration class types

Hi Friends,
I have some questions on variant configuration class types
What is the difference among following class types?
1. 001 --- Material class
2. 023 -
Batch
3. 200-----Material (Configurable objects)
4. 300-----Variants
In which business scenario we can define above class type? Could you please explain with some example scenarios?
And also what is the difference between "Fully configured material" and "Configurable Material"
Valuable information in this regard is greatly appreciated.
Best Regards,
Krish

Hi Krish,
1. 001 --- Material class for general information of one material. It is fix information.
    Example : Tiles
    Class 001, characteristic : Size : 30 x 30, Color : White, etc
2. 023 -
Batch for goods receipt / production specific data
    Example : Tile
     Class 023, characteristic : Prod Date : 23.08.2011, Grade : First Grade, etc
3. 200-----Material (Configurable objects), For Configurable material (strategy in MRP 3 : 20, make to order type). In sales order we must define the characteristic of product customer as customer request.
   Example : Car
   Class 200, characteristic : AC : Yes / No, Tire : Upgrade / Standard, etc
   From Characteristic chosen in sales order will determine the BOM and Routing of production order. See Variant   Configuration topic for more detail.
4. 300-----Variants for material variant. We create material variant for configurable material. Value of characteristic is determine in material master.
    Example : Car Type 1
     Class 300, Characteristic ; AC : Yes, Tire : Upgrade
Hope it give you brief explanation.
Best Regards,
Arman Lie

Reg creating Catalog Views through R/3

Hi Guys,
I am working on an internet sales application with backend as SAP R/3 ECC 6.0. We are not supposed to use CRM. Can someone tell me how to create them?
I have to create Catalog Views. I tried to acess the SAP Note 998453 and 998458, but i am getting the message "The requested SAP Note is either in reworking or is released internally only". Can someone tell me how to access these notes.
I have also gone through the SAP Notes : 696095, 677319, 677320 but couldn't find much help.
What is a BP or a target group?
I have gone through the the following sdn link also but couln't find much help.
Creating Catalog Views
Can someone provide me the step by step process.
Any kind of help will be deeply appreciated. Please do reply.
Thanks,
Ibrahim

Hi Ibrahim,
I understand your requirement is slightly different than ours.
Based on the customer type (let's say: gold and silver) the catalog view should be displayed, right?
The question is: how do you match a material with the customer type? Let's say you have 20 materials in the catalog, how do you know what materials can be displayed, and what not? In order to do so, you will need to put a "label" on every material.
The option we choose for this is using attributes.
trx. CT04 - define the attributes (1 attribute, with 2 values 'gold' and 'silver')
trx. CL02 - create a class (of type 001 - material class). The class is only used as a dummy, so you can attach the attributes to it.
Now add the attributes to the class.
Now, for every material you maintain the class (dummy) and the attribute (gold or silver).
Mat 1    gold
mat 2    gold
mat 3    silver
mat 4     silver
Now, with the coding I gave to you, the product catalog is replicated to TREX. Every material is given a label "VIEWS_ID", which is filled with value "gold" or "silver".
Now, when the customer logs on to the webshop, it's checked what customer type he is (gold or silver). Let's say it's gold, then from all materials, the VIEWS_ID is read, and materials with a matching VIEWS_ID (gold) are shown to the customers. So material 1 and 2 are shown, 3 and 4 are hidden.
In case you have a catalog with a large structure, you might want to show also a limited piece of the catalog structure to the customer. In that case, you do the same for catalog branches, with classification type 060 layout areas.
Hope this helps you out.
regards,
Wim

Error Info... FPRUNX 001: ADS: com.adobe.ProcessingException:

Anyone every run into this error after saving a PO?
Error Info...   FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
The full message is:
System ID....   PR3
Client.......   100
User......... ELBURGD
Transaction..   ME21N
Update key...   4EC42600E07900E1E10080000A14402B
Generated....   17.11.2011, 06:09:20
Completed....   17.11.2011, 06:09:24
Error Info...   FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
Using SM13 it says:
Function Module: RV_MESSAGE_UPDATE
Status:                  Update was Terminated
Class:                   FPRUNX      Number: 001
FPRUNX 001: ADS: com.adobe.ProcessingException: com.adobe.Processin
This happens seemingly randomly in production after the user saves a PO. They'll create a PO, save it, get the PO number , start a new PO and a message box pops up saying:
Express document 'Update was terminated' received from author 'xxxx xxxxx'
If the user goes back to the PO to look it up, the PO does not exist. If the user creates a new PO (or recreates the one that failed to commit to the database), it'll save with no trouble... same print settings, same everything. This leads me to believe the problem isn't with the PO form but with the ADS. The PO form is custom and works without error in dev and QA. I do believe the users are setting the message options to Print Immediately.
I am unable to recreate the problem in dev or QA, and it appears randomly in production. I've run the ADS test programs in production and they come back without errors.
Has anyone run into this before? Are there some settings on the ADS that might need to be adjusted? I don't think this is form related since we're able to recreate the same PO and save without error immediately afterwards, but could this be a form problem?
I am open to any and all experiences you've encounted, and any suggestions you may have.
Jeff Kulbeth

Recently I had the same error with Adobe Form. In my case there were a few problems regarding data binding and data format. In a Form there was unresolved data binding warning and data format mismatch with one field - Form interface contained variable of type decimal and in the Form content that variable was bound to the field of type numeric with data format integer. Adobe Form with such kind of issues can be activated without errors but during Form call you get error FPRUNX001
So my advice would be to consider things like:
Resolve data binding warnings. Its in the Report palette witch by default is located in the bottom left corner of the vertical palettes bar.
Check that Form interface data types match with Form content fields data formats in data binding sub-menu.
Also in your Form calling application you can trace ADS by using these function modules:
FP_GET_LAST_ADS_ERRSTR - provides texts about the cause of the error
FP_GET_LAST_ADS_TRACE - provides a trace of the Adobe document services

Domain Class and EJB Component

Hi,
I have defined a set of domain classes(with get/set methods) and a set of EJB Session Beans for the business logics.
The question is, where do I locate the domain classes?
Create a package for it (e.g. com.mysystem.domain)?
Or distribute it into the Session Bean packages (e.g. for account related domain classes, place it into com.mysystem.ejb.account)?
The problem for placing it into the domain package:
1. I have too many domain class ( >200). It's hard to maintain and perform analysis. (Imagine >200 classes in a class diagram)
2. All session beans need to import the "com.mysystem.domain" package in order to reference the domain classes. Therefore, all session beans will have the dependency to the domain package. Is it what component based development (CBD) does?
The problem for distribute it into the Session Bean packages:
1. Some domain classes are heavily depends on other domain classes (e.g Address class has association relationship with the Customer class and Staff class) If I have a session bean for Staff Management(StaffBean) and Customer Management(CustomerBean), where should I put the Address class?
1. Some domain classes are abstract classes. e.g. Person abstract class have a generalization relationship with the Customer class and Staff class. Similiar to point 1, where should I put the Person class?
It is appreciate if anyone can clear my mind of component design.

I have the same confusion, but I think we should place them in a separate packages , a package for each related bundle of domain objects, the logic behind this is that domain object should not know that you are using EJBs or any other technology .
an OO expert advice is appreciated

Reg 0MAT_ATTR ,0MAT_ATTR(Class 200),0MAT_ATTR(001)

Similar Messages

Maybe you are looking for