Reg:2LIS_11_VAITM

Business content for the ITM extract has been discussed many times in the forums - pease searh the forums before posting
Dear All,
what is the standard query for infosource 2LIS_11_VAITM?
Thanks,
Sankar M
Edited by: Arun Varadarajan on Mar 20, 2009 3:53 PM

Hi,
Archive unused data from ODS's and cubes , by maintaining less data in data targets we can improve read and write performance.
regards,
Raju

Similar Messages

2lis_11_VAITM not inserting all data in ODS

Hello Gurus.
I'm using extractor 2lis_11_VAITM, when I test the extractor in RSA3, it is bringing me all registers of table VBAP, but when I load this extractor into an ODS in BW, It is not inserting all registers into the cube, some "return orders" are missing, how can i solved this problem ???? I'm using in ODS key Doc number and position.
THANKS IN ADVANCED.

Hi Sudheer, ther is no selections during data load, and also ther isn't any routine(either in transfer or update rules). It's supposed that all registers have to be loaded to the ODS no ?? because i'm using key Doc number and positions, so I want all documents with all positions to be loaded, but this is not happening, there are missing the "'return orders'".
Any other idea of why this is happening ??

Mail can't send email from 123-reg accounts

Hi all,
I've got an issue with Mac Mail can’t send email from 123-reg accounts.
I know there is a lot of articles on simular matters and some I have tried out with no luck, others are just speaking a whole other language.
Any help would be greatly recived, here's my situation below:
Running a iMac 2.8GHz Intel Core i5 on OS X 10.8.3
I’m using 3 accounts on Macs Mail client, one is my iCloud account that is working fine and the other two are my 123-reg accounts that I use for business purposes. I’ve been working like this for a couple of years now and about 6 months ago I upgrade my operating system from Snow Leopard to Mountain Lion.
2 or 3 months ago I randomly got a problem where I was unable to send any emails from my 123-reg account, I could only receive emails. I checked my settings and they were all correct and unchanged so I attempted to delete them and recreate the account but with no such luck.
I then decided to check if it was a problem at 123-regs end and attempted to log into web mail. This worked and was able to both send and receive emails so eliminated that possibility.
I also have these accounts set up on my iPhone, so checked if there was any issues and everything was working fine. I then checked my iphone details and made sure the same was on my desktop and still no such luck.
I’ve tried out some of the articles I’ve found on here (the ones written in plain English) still no results. I’m not very IT illiterate and just wondered if anyone else has got any ideas, whether there is something specific with 123-reg accounts and Mac Mail?
Many thanks.

Thanks
I just had another hunt around looking at posts and discovered that it was because I recently changed to BT Infinity and they had a block on.
I didn't even think to question the ISP.
https://discussions.apple.com/message/21173608#21173608

No data in RSA3 for 2lis_11_vaitm

hi,
I am testing the extractor 2lis_11_vaitm and there is no data in RSA3. i have checked the sales orders and there is data. please let me know what the problem may be.
Many thanks
Emil

Emil,
Here are the steps.
1) Use transaction LBWG to delete the contents of the setup table for application 11.
2) Use transaction OLI7BW to perform the statistical setup of sales documents (make sure to block all orders).
3) While setup job is running, use transaction SA38 to run progrm RMBWV311. This will move the V3 updates to the delta queue so as not to double up this data.
4) Now in RSA3, execute the 2LIS_11_VAITM datasource.
Abdul

No data in RSA3 for 2LIS_11_VAITM and 2LIS_11_VAHDR

hello experts,
i want to extract data from 2LIS_11_VAHDR and 2LIS_11_VAITM but dont see any data in RSA3.
I have already activated the datasource in RSA5 and LBWE. After running the setup tables using OLI7BW i still dont see any data in RSA3.
Pls advice... is there something i am missing?
thanks
Jagpreet

Use SE16 and verify that there is data in the MC11VA0HDRSETUP table. If there is no data, then your setup tables were not updated (or the setup extracted no records).
In RSA3, make sure you select Update Mode of "C" or "F". This will check data from the setup tables.
Hope this helps.

Reg: Message and BPM

Hi
I'm having a scenario where i use a JDBC adapter to extract data from a DB. As a result of the query say, 10 rows are returned as message to XI server. I have a transformation (BPM) set and the receiver(target system) is a file. When i open the file to see its contents i can see only the first record been transfered. The mapping part used for the transformation node is having IF condition. But all the fetched records satisfies the conditions in the mapping.
Pls let me know the corrective step.
reg: Prabhu

Hi,
1)Check the input XML i.e all 10 records are coming into XI . This you can check in SXMB_MONI
2) Then you can test the mapping in the integration Reposiotry .. So now you can get if any mapping problem. For this , check is the occurence of target strcuture is 1..n or 0.n
/people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
3) If mapping is correct , then check the RWB->Message Monitoring->Message Display Tool and check the payload.
4) If this is correct, then check the File COntent Conversion of the Receiver File Adapter.
Hope this helps,
Regards,
Moorthy

2lis_11_vaitm

Hello Gurus
i have a query regarding Updation of records.
my scenario is as follows
I am using 2lis_11_vaitm as a info source for the following data targets
1. ZOVAITM [ODS], After extracting the data, i could see under Request tab [Transferred Records 656 and Added Records 656]
2. 0SD_O01 [Order Item ODS], After extracting the data, i could see under Request tab [Transferred Records 656 and Added Records 582]
3. 0SD_O02 [Return Items ODS],After extracting the data, i could see under Request tab [Transferred Records 656 and Added Records 48]
For these 3 ODS the key fields are same ie. 0DOC_NUMBER and 0S_ORD_ITEM, where as the number of added records are differing. Now my question is where is the restriction taking place? i checked in update rules and info package Data Selection TAB, i couldnt find anything. i want to know where the bifurcation taking place? any tables? routines? hope my question is clear if someone knows this answer plz let me know. this will make my task very easy..Thanks
Regards
Kanth

Hi,
0SD_O01 is the ODS for Orders only. So it maintains the Documents of type ORDER or ORDER w/o Charge.
0SD_O02 is the ODS for Returns only. So it maintains the Documents of type RETURN or Credit memo.
And your ZODS holds all the data irrespetive of the Document category.
So that you are getting variation in no of records added to ODS.
With rgds,
Anil Kumar Sharma .P

Reg: How to Stop Polling of JDBC Adapter without Scheduling the adapter

Dear Gurus,
Here I am having one requirement. My clients wants to send data from JDBC adapter (ORcale System table) to R3 system via RFC.
His Requirement::
1. He is not telling the time of data flow from Oracle server so that based on that we can schedule the adapter in the Communication Channel monitoring (Availablitiy Time Planning) or Else we can Schedule by deciding the setting of the polling interval time.
2. He is telling that When ever he waants to send the data he will place one dummy file in the File Adapter FTP location so that it will became an Indication for u to poll the jdbc adapter and to transfer the data to R3.
3. Untill he keeps the file or gives indication he doesn;t want to communicate with Oracle server due to some security and it s a most important data base he doesn't want to disturb that Oracle Server as so many business are running on that.....
We Proposed::
1. Atleast you need to tell the scheduling time or poll interval time so that we can schedule our adapter.
but he s not accepting for this
2. Atleast U need to give access for Data base to enter one more extra field like STATUS CODE so that we will add one number and we keep on Update in the Update table and based on that Update table statement it will poll.
but he s not even accepting for this
3. Finally we prposed that to create another table in the Oracle SYstem as Dulplicate Table which is similar to Standard Orginal table when ever he wants to pick the data please keep that data in this Duplicate TABle so that JDBC adapter will pick the data from thsi TABLE instead of picking the data from that standard table so that it will not effect any standard table data in the table.
but he s not even accepting for this
We have done some R & D:::
1. WE approached even through BPM and via switch conditions is one scenario
 FILE RECEIVE >SWITCH CONDITION> RECEIVE AND SEND or else EXIT
2. Using correlation in anotehr scenario means correlating File adapter and JDBC and based on one dynamica value it will goes to SEND STEP ( RECE IVE --> RECEIVE --> SEND STEPS )
Even though we know this...concept that...we jsut tried::
In BPM we can control the flow in XI 3.0 but we cannot Stop the Polling of JDBC adapter at backend because one the data comes from FILE adapter it will keep on HOLD untill it receives the JDBC from Oracle then based on the condition or Correlation it will goes futher SEND step means after that file adapter is picking file or not ...what ever it may be JDBC will polls at backend and brings that data to BPM"
Hence sugest me How to Stop Polling of JDBC Adapter without Scheduling the adapter or else using STATUS CODE Update statements in JDBC Tables
Regards:
Amar Srinivas Eli

Hi! All,
Finally I decided to do the scenario in two steps:
1: FILE REQ --> JDBC REQ -->JDBC RES --> FILE RECV
2: FILE RECV --> RFC
But I am getting issue while doing first scenario
Desgn :
I have created 2 Synchronous interfaces :
1) FILE 2 JDBC REQ
In this a) out put message is FILE Req
 b) Input msage:; FILE RES
2} JDBC2FILE RECV
 a) Output mesage;; JDBC REQ
 b) Input Msge :: JDBC Response
Mappings:
1) File REQ-->JDBC REQ
2) JDBC RES-->FILE RES
Interface mappings:
1: FILE 2 JDBC REQ--> JDBC 2 FLE RECV
CONFIGURATION ::
1: One Seder File CC
2: Two reciever CC's one is for JDBC RECEIVER and other s FILE RECEIVER
3; One Sender Agreement
4: 2 Recver agreements
5: One Interface Determination and
6: One RECCV Determination
My Question;;
1. First let confirm whether my development steps are right or not ?
2: Another thing s I am not sure reg Configuration Steps means
whetehr one interface determination and one Receiver Determinations are required or not as these are synchronous Interfaces
3: main Issue is::::
If my scenario s FILE2RFC2FILE then I will get RFC response automatically but here issue is this is JDBC
My reqquirement is By sending one Field from fILE to JDBC REQ it needs to send entire TAbLE records as a Response to file as XML
without having Sender JDBC how can I send the JDBC Res to FILE and If that is the case then again JDBC adapter is polling which is contradict to the client requuirement which i explained above.
pleas suggest me the Detailed steps mainly Colloboration agreements and logical routings and
also explain in detail if i can go for BPM
Also give cleear blogs but before giving make sure that it contains detailed screen shots because aIready gone thorugh
Scenario File-JDBC-RFC
File<-->JDBC Sync coomunication.
https://www.sdn.sap.com/irj/scn/wiki?path=/display/xi/file-rfc-file(Without+BPM)
/people/luis.melgar/blog/2008/05/13/synchronous-soap-to-jdbc--end-to-end-walkthrough
Regards::
Amar Srinivas Eli

Excise Reg at Depot

Hi all,
We have Excise REg no for Plant. But plant does not have Excise reg no.
Material is shipped to Depot with excise invoice. What is the procedure at depot for GR.
Do i need to capture the excise invoice?. From Depot, there is no excise invoice generated for customers.
thanks.

Hi,
Refer following link;
[J95 - Sales at Depot|http://help.sap.com/bp_bblibrary/500/HTML/J95_SaleDepot_EN_IN.htm]

How to set reg.cgi for VideoPhoneLabs

i start with stratus .i try set it to work with my dedicated apache server and sql but have no clue how to do it or where to put this file on my server.
i realy have probleme with reg.cgi
for now i did www/cgi-bin/reg.cgi and in the xml i set my websiteurl = "http://88..../cgi-bin/"
also how to complete reg.cgi for have it to talk with my db ?
here the reg.cgi file.
help please ...
#! /usr/bin/python --
reg.cgi by Michael Thornburgh.
This file is in the public domain.
IMPORTANT: This script is for illustrative purposes only. It does
not have user authentication or other access control measures that
a real production service would have.
This script should be placed in the cgi-bin location according to
your web server installation. The database is an SQLite3 database.
Edit the location of the database in variable "dbFile".
Create it with the following schema:
.schema
CREATE TABLE registrations (
 m_username VARCHAR COLLATE NOCASE,
 m_identity VARCHAR,
 m_updatetime DATETIME,
 PRIMARY KEY (m_username)
CREATE INDEX registrations_updatetime ON registrations (m_updatetime ASC);
# CHANGE THIS
dbFile = '.../registrations.db'
import cgi
import sqlite3
import xml.sax.saxutils
query = cgi.parse()
db = sqlite3.connect(dbFile)
user = query.get('username', [None])[0]
identity = query.get('identity', [None])[0]
friends = query.get('friends', [])
print 'Content-type: text/plain\n\n<?xml version="1.0" encoding="utf-8"?>\n<result>'
if user:
 try:
 c = db.cursor()
 c.execute("insert or replace into registrations values (?, ?, datetime('now'))", (user, identity))
 print '\t<update>true</update>'
 except:
 print '\t<update>false</update>'
for f in friends:
 print "\t<friend>\n\t\t<user>%s</user>" % (xml.sax.saxutils.escape(f), )
 c = db.cursor()
 c.execute("select m_username, m_identity from registrations where m_username = ? and m_updatetime > datetime('now', '-1 hour')", (f, ))
 for result in c.fetchall():
 eachIdent = result[1]
 if not eachIdent:
 eachIdent = ""
 print "\t\t<identity>%s</identity>" % (xml.sax.saxutils.escape(eachIdent), )
 if f != result[0]:
 print "\t\t<registered>%s</registered>" % (xml.sax.saxutils.escape(result[0]), )
 print "\t</friend>"
db.commit()
print "</result>"

Persistent binding is effectively provided by STMS (MPxIO) - is there anything in particular you're wanting to do that STMS doesn't provide?

I bought an itunes gift card in a different country than my account is reg to, can i use it??

my acc is reg in ireland, i am currently in new zealand and bought a gift card, i cant work out how to use it, help!

You can't.
They are country specific.
You could get a New Zealand address, then get a credit card that is billed to that address, then set up an account in New Zealand, and as long as you are inside the Borders of New Zealand, then you could redeem the card.

How to execute a .reg file in a task sequence using MDT 2013

Hi,
Im trying to add a couple of desktop icons to my custom images during deployment using MDT 2013. I have a .reg file with all commands inside it but I am struggling to get these to work. the .reg file is located on my deployment server and is in a shared
folder which everyone has full read\write access to, I was wondering if someone could help?
The commands inside the .reg file are:
reg add HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\ClassicStartMenu /v {20D04FE0-3AEA-1069-A2D8-08002B30309D} /t REG_DWORD /d 0 /f
reg add HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel /v {20D04FE0-3AEA-1069-A2D8-08002B30309D} /t REG_DWORD /d 0 /f
reg add HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\ClassicStartMenu /v {59031a47-3f72-44a7-89c5-5595fe6b30ee} /t REG_DWORD /d 0 /f
reg add HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel /v {59031a47-3f72-44a7-89c5-5595fe6b30ee} /t REG_DWORD /d 0 /f
Thanks

That's not a *.reg file. that's a set of commands used in a *.cmd file.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Since my last firefox update, I have been unable to type an email - the text box does not appear when I press 'reply' , or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] s

Hello. Since my last firefox update, I have been unable to type an email - the box within which one would usually type does not appear when I press 'reply' to a received email, or press 'compose'. The email provider is '123-reg.co.uk. I have been using both firefox and the provider ['webfusion Ltd/webmail123] successfully for well over a year. The provider says it is a browser problem. I can still add an attachment to the email header, which successfully can be sent, but the recipient gets my standard email 'signature' with font messages and the attachment. Can anyone help? My email addresses are [email protected] [this is the one with the issue] and [email protected] in English
== today

My daughter has had her Razr for about 9 months now. About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

Error while scheduling 2lis_11_Vaitm

Hi Gurus,
I am getting the following error, when i am scheduling DS "2lis_11_Vaitm".
Operation could not be carried out for
Transformation does not exist (see long text)
Transformation does not exist (see long text)
Postprocessing PSA /BIC/B0000123 failed (rc = 1)
Error when activating DataSource 2LIS_11_VAITM S01LO100
Operation could not be carried out for
Transformation does not exist (see long text)
Transformation does not exist (see long text)
Postprocessing PSA /BIC/B0000123 failed (rc = 1)
Error when resetting DataSource 2LIS_11_VAITM S01LO100 to the active version
Operation could not be carried out for
Transformation does not exist (see long text)
Transformation does not exist (see long text)
Postprocessing PSA /BIC/B0000123 failed (rc = 1)
Error when activating DataSource 2LIS_11_VAITM S01LO100
Operation could not be carried out for
Transformation does not exist (see long text)
Transformation does not exist (see long text)
Postprocessing PSA /BIC/B0000123 failed (rc = 1)
Error when resetting DataSource 2LIS_11_VAITM S01LO100 to the active version
Please help me. Thanks in advance.
Thanks & Regards
Manna Das

Hi,
Please refer to following notes:
0001142908 70SP19: BDLS does not convert DTPs
0001266603 Re-importing into source system deletes routines & formulas
0001292311 Extraction monitor probs. for transformations from migration
0001369395 Transformations generated from migration: Repair tools
0001432815 BDLS does not convert DTP: See description for constraints
Thanks & Regards,
Vipin

Error while compiling : Couldn't allocate output reg for contraint '{ax}'!

Hey all,
I'm trying to use an encryption library with Flash using Alchemy (PolarSSL)
I don't have any experience with compiling C and stuff (I've programmed in C# and Flash before) and I get an error when trying to compile my test program. I get :
Couldn't allocate output reg for contraint '{ax}'!
Does anyone know why I am getting this error? I managed to compile only the MD5 part of the library in flash and it all worked, that happens only when I try to put more classes from PolarSSL into my library.
Thank you

Hey all,
I'm trying to use an encryption library with Flash using Alchemy (PolarSSL)
I don't have any experience with compiling C and stuff (I've programmed in C# and Flash before) and I get an error when trying to compile my test program. I get :
Couldn't allocate output reg for contraint '{ax}'!
Does anyone know why I am getting this error? I managed to compile only the MD5 part of the library in flash and it all worked, that happens only when I try to put more classes from PolarSSL into my library.
Thank you

Reg:2LIS_11_VAITM

Similar Messages

Maybe you are looking for