REG: 4 different folders from the source side and we need to have the BPM t

Hi All,
We are using a BPM for file-idoc scenario. Previously we use to have one source folder which sends file and the bpm worked fine. Now we have a requirement where the files come from 4 different folders from the source side and we need to have the BPM to run independently for each folder.
What are the changes to be made in IR and id for this..
Thanks & Regards,
Kiran.

File adapter has a option advance selection of source file setting which can be used for picking files from different folder.

Similar Messages

Cloning use the different gcc version between source system and target sys

Hi All,
Our system is: Application tier and Database tier is split to two servers.
We should run a cloning, but I found the different gcc version on application tier on source system and target system.
The source application tier server is RedHat Linux ES3, gcc version is 3.2.3
The target application tier server is RedHat Linux ES3, gcc version is 2.9.6
There is the same gcc version on database tier on source system and target system, they are gcc 2.9.6.
My question: Can I use the different gcc version between source system and target system when I run an erp cloning?
Thanks & Regards
Owen

Not necessarily, you might get some errors if the version is higher and it is not supported by the OS. An example is Note: 392311.1 - usr/lib/gcc/i386-redhat-linux/3.4.5/libgcc_s.so: undefined reference to 'dl_iterate_phdr@GLIBC_2.2.4'
To be on the safe side, make sure you have the same version (unless you want to give it a try).

Media Encoder export a different font from the project file

HI
Media Encoder export a different font from the project file when I use a installed font
The problem doesn't occur when exporting directly from Premiere
Any ides why?
Thanks

Hi! This also happened to me quite a few times with different fonts. Your fix worked, thank you. I don't think it's the font since, like I said, it happened with a few fonts, but just in case I was using Mf Young & Beautiful in TTF format.
Are there any side effects to turning off "import sequences natively"?

How can I make different catalogs from the same image

How can I make different catalogs from the same image where that image has been changed in some way between the catalogs. For instance if I wanted to have a catalogs for cropped images and have 3 catalogs one for 4x6 , 5x7 and 8x10 cropping. When I tried this , if I changed a file in one catalog that same image in the other would change also.

Do not confuse the creation of the crops and the display in collections per crop ratio.
Of course one virtual copy (VC) per crop ratio is needed. If the same image should be cropped in all 3 mentioned ratios there would be 3 VCs.
The OP asked how to have/see a set of same-crop-ratios.
After having created the virtual copies for whatever crop ratio he wants, the way to display this result in the fashion asked for is via smart collections, provided they can be found. Without a plugin the naming of the VC with the crop ratio applied is a straight way to achieve that.
IF the wish is to get new crops automatically added. (See my answers 2+3)
IF the wish is to creat static collections per crop ratio for a certain set of images, I'd go as follows:
1. Select all images you want to have cropped in that way,.
2. With this selection click on the + to add another collection and fill the dialog box like this:
Then navigate into this newly created selection and perform the 4x6 crop - according to taste individually or by synchronizing the first crop.
Cornelia

SUM two fileds from different rows from the same table

I would like to SUM two fileds from different rows from the same table but I don't know how to do that.
E.g.
BillingTransactionsIndex      CreateDate      UserType      UserIndex      TransType      Reference      Total      Balance
2      6/5/2008 15:02      1      51      1      150      -288.2      -288.2
5      6/8/2008 11:55      1      51      1      157      -1.58674      -289.787
In the table above I want SUM fields Total and Balance for the first row and the the next row SUM 2nd row Total with 1st row Balance
Please help
Thanks

SQL> with tbl as
2 (select 1 as ID, 90 as total from dual
3          union all
4 select 2 as ID, 23 as total from dual
5          union all
6 select 3 as ID, 15 as total from dual
7          union all
8 select 4 as ID, 20 as total from dual)
9 select id , total, sum(total) over (order by ID) as balance from tbl
10 /
        ID      TOTAL    BALANCE
         1         90         90
         2         23        113
         3         15        128
         4         20        148
SQL>

I'm converting from a PC to iMac. On the PC I have many Inbox folders with PR info for distribution. How do I get these folders from the PC to the iMac?

I'm converting from a PC to iMac. On the PC I have many Inbox folders with PR info for distribution. How do I get these folders from the PC to the iMac? I've used the Windows e mail Inbox folders for an easy access filing cabinet for years, as this all goes out on e mail. Thanks for assisting me!

I think the easiest way would be to use Migration Assistant to get all that over...
http://support.apple.com/kb/HT2518
http://support.apple.com/kb/DL1415

Why do I get two different results from the same coefficients?

I am getting two different results from the Polynomial Evaluation function.
For the first one, I am getting the coefficients from a Polynomial Fit function. I feed the coefficients from the Fit function into the Poly Eval function and get the correct result of 12.8582 when I evaluate 49940.
For the second one, I create constant array of the SAME values that were returned from the Polynomial Fit function (i typed them in). However, I am getting an incorrect result of -120.7913 when I feed the constant array into the Poly Eval function when I evauate 49940.
How can this happen when I am using the same array values?
Attached is an image of what I am explaining.
Solved!
Go to Solution.
Attachments:
polynomial_evaluation.jpg ‏213 KB

Hi Altran,
are you sure about using the "same" coefficients?
Did you compare them? Did you (atleast) set the display properties to 17 significant digits?
Please attach a VI instead of a picture...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Is it possible to lock my settings with a different password from the lock code

Is it possible to lock my settings with a different password from the lock code

To the best of my knowledge there is only one Pass Code per se
You can check here > iPhone User Guide

Can I hide certain folders from the 'tree view' under Site Manager - Pages?

In the above image, is there a way to hide the circled folders from the listing?
This will help in reducing confusion and possible breakages.

Hi AirborneAgency,
unfortunately there is not, educate the admins of this site not to touch these folders instead. That's what I do with my clients and it works just fine.
Nicole - BCGurus.com | http://bcgurus.com/Business-Catalyst-Templates for only $7

TFS Workitems:Bugs : I want ot select different lists, from the global list, for fields basd upon user group

Hi,
I am customizing the bug workitem workflow.
I want ot select different lists, from the gllobal list, for fields basd upon user group
I am aware that I can use "when" clauses in the allowed/suggested values of the field.
My question is : how do I get the group(s) that the current user is in and how do use this to select different lists?

Hi!
You can not do this through standard way. You must to create the custom work item control:
http://witcustomcontrols.codeplex.com/
And get the user group through IIdentityManagementService.
IIdentityManagementService IdentityService = _workItem.Store.TeamProjectCollection.GetService<IIdentityManagementService>();
TeamFoundationIdentity _curid = null;
_workItem.Store.TeamProjectCollection.GetAuthenticatedIdentity(out _curid);
string _group = "Admin";
var _gr = IdentityService.ReadIdentity(IdentitySearchFactor.AccountName, _group, MembershipQuery.Direct, ReadIdentityOptions.None);
if (_gr.Members.Where(s => s.Identifier == _curid.Descriptor.Identifier).Count() > 0) return true;

How can I make an external link (to a different folder) from the main menu?

How can I make an external link (to a different folder) from the main menu?

If the folder is outside the Muse page, you will have to insert manual HTML to define a more complex URL like e.g. ../_stuff for going one level up and then into a folder called "_stuff" The deeper you are in the hierarchy, the more ../ you will have to add to climb up.
Mylenium

HT1657 if I don't have apple tv how can I watch the movies on my tv because my computer is in a different room from the tv?

if I don't have apple tv how can I watch the movies on my tv because my computer is in a different room from the tv?

If you no longer have, or access to, the computer(s) you want to deauthorise,
Log in to iTunes, go to "view your account info" on the itunes store, deauthorise all five, (Please Note: this can only be done Once every 12 months) and then re-authorize your current Computer(s) one at a time.
Authorise / Deauthorise About
http://support.apple.com/kb/HT1420

Different behavior from the PRE function based on BMRS and WMRS

Hi All,
We are seeing different behavior from the PRE function based on whether the type is Before Modified Record Saved or When Modified Record Saved. Should the PRE function work the same for both as long as there is not a Wait action in the WMRS workflow?
(((PRE('<plTier_ITAG>') <> [<plTier_ITAG>]) AND ([<plTier_ITAG>] = '2 - BA')) AND [<IndexedPick4>] = 'FSCM')
Explaination: The Tier field changes AND now equals Tier 2, AND Application is equal to 'FSCM'
The same expression fires only as designed in BRMS, but in WMRS it fires every time a SR is in Tier 2 and IndexedPick4 = 'FSCM', regardless of whether a change was made to the Tier field.

Try changing your syntax around to something like -:
PRE('<plTier_ITAG>') {NOT EQUAL} '2 - BA' AND [<plTier_ITAG>] = '2 - BA' AND [<IndexedPick4>] = 'FSCM'
+i.e. Previous value of Tier is not equal to "2 - BA" and current value of Tier equals "2 - BA" and IndexedPick4 equals "FSCM". Replace {NOT EQUAL} with the appropriate syntax+
Regards,
Cam

I am on Source side and DDL replication is enabled.

I am on Source side and DDL replication is enabled.
I would be providing initial dump of TABLE and VIEW objects to target using Export DP to Target.
And start Golden Gate Extract, Pump on Source.
Source PRM file has Table list.
EXTRACT ex1test
DDL INCLUDE MAPPED
EXTTRAIL ./trails/l1
TABLE ABCD.T100;
TABLE ABCD.T200;
TABLE ABCD.T300;
Objective is ---- If I change VIEW definition at Source, it should be reflected to Target
Question is --- In my PRM file, how I can include VIEWs???
If the source has 10 views , only 5 are replicated to target ..
DDL changes for only the ones in the target should be considered other must be excluded
Thanks and Regards,
Kurian

Hi Kurian,
Oracle GoldenGate supports VIEW replication in both Classic and Integrated Modes. But we do have some limitations on it.,
1. Capture from a view is supported when Extract is in initial-load mode. The data is captured from the Source View and not the Redologs.
2. Changes made to the data of the view will not be captured.
3. View replication is only supported for inherently updateable views in which case the source table and target view structures must be identical.
You can exclude DDL Objects using the ddl_filter.sql
To know more about ddl_filter.sql, follow the below link.,
http://docs.oracle.com/goldengate/1212/gg-winux/GIORA/ddl.htm#GIORA316
Under this,
13.8.1 Filtering with PL/SQL Code
Regards,
Veera

I upgraded to Mavericks from 10.6.8 and I no longer have any of my mail folders in macmail. If I look up an email via spotlight, I can find it, so it's in there. How do I restore my folders?

I upgraded to Mavericks from 10.6.8 and I no longer have any of my mail folders in macmail. If I look up an email via spotlight, I can find it, so it's in there. How do I restore my folders?

As an update: I was able to find my archived boxes and emails on my hard drive by doing this:
Open a Finder window.
Select Go | Go to Folder… from the menu.
Type "~/Library/Mail/V2".
Once I was able to get my macmail working properly, most of my mailboxes appeared, however not all and only a few recent emails are in a few of the boxes.
I really need to move the emails from the archive back into my macmail. When I try to import using the mbox method, it doesn't recognize the .mbox even though they are .mbox. Other than re-emailing each individually to myself, I don't know what to do. Does anyone out there have any suggestions as to some easier solution?

REG: 4 different folders from the source side and we need to have the BPM t

Similar Messages

Maybe you are looking for