Reg: Activation of Business Content in R/3
Hi Friends,
I want to activate datasources relating to Purchase Orders(2LIS_02_HDR,2LIS_02_ITM,2LIS_02_SCL). There are 2 places where I can find these datasources....in RSA5 and in LBWE.
I activated(Transfer Datasources) in RSA5.
Do I need to activate the same in LBWE (LO-COCKPIT procedure)??
Can ne1 guide me in the right direction.........
Points will surely be awarded.........
Check this post:
Activating DataSource in R/3
Hope it helps.
Regards
Similar Messages
-
Error in Activating the Business Content Infocube 0CRM_C08
Hi Experts,
when iam trying to activating the business content infocube 0CRM_C08
iam getting few errors
Error-1:- Characteristic 0COUNTY_CDE is still being used as target of transfer rule ZCOUNTY_TEXT
Error-2:- Char. 0CRM_OBTYP3 is exclusively an attribute (cannot be a navigation attribute)
Error-3:- Authorization field CRM_SALORG still being used in authorization objects
Error-4:- Cannot delete authorization field of InfoObject 0CRM_SALORG
Error-5:- InfoObject ZDGTDCODE is used in transfer rules (1CL_OMAT001_BB) of characteristic 0MATERIA
Can anyone please clarify regarding these kind of errors.
What i have to do for make a successfull activation
Thanks in Advance
ARUNHi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar. -
ERROR while activating the Business Content of Sales Cube 0SD_C03
Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar. -
Error during activation of business content
Hi
I am facing problems during the activation of the standard business content.
I am trying to activate the infocube 0ic_c03 material stock movement. We are using BW version 3.5 patch level 13.
while activating the business content and using the grouping "in data flow before" there are several errors which come up during the simulation install such as
infoobject XXX is not available in version A
Error when reading data target XXXX
Data source XX not mantained
Key figure XXX is not available in version D
In order to avoid activating pre-installed objects i have deselected them.
I am in urgent need of some help. So any ideas that will help to resolve my problem are assured of being rewarded handsomely!!
thanks in advance!Hi Everyone!
Thanks the responses have been encouraging and i do see a glimmer of hope
since i am fairly new at this I wanted to know
1. does it make sense to install (or activate) the infoobjects which are shown as not available in version A individually and then trying the install of the infocube. It does remove the errors associated with the infoObject as i saw with one infoobject. Does this have any other impact
2. For the data sources i went to rsa5 on the source r3 system. but the data sources listed in the errors were not found (the data source errors that are shown are of the type 0DBDUNS_IMPORT_XXX). Also it is my understanding that the data sources that are required for the inventory cube are 2lis_03_bx , 2lis_03_bf and 2lis_03_um. Is this correct? I do not see them indicated in these errors. What do i do once i am in rsa5 and i select these datasources?
thanks in advance! -
Question on activation of Business content.
Hi friends,
Our client is implementing BW , and we are in the process of activation of business content, I already some content activated already , for Porcurement, right not I see , in Administrator work bench > Infoprovider TAB>0MMPUR_IO and all the master data objects under neath it and the same under Infosources tab also , so what is the grouping they might have follwed in installing and with what activation they must have started with ( IO, Infoarea, Insource..data targets ..)?
Once we know what they have followed with , we want to continue the same for others .
thank you.You can still activate content with grouping as required but in the process just make sure you set/flag the Match(x)or Copy and Installation will not impact/overwrite already activated objects.
-
Error while activating the business content object
Hi guru,
We have installed a new BI system, and hence we need to activate all the business content object as they are available in delivery version.
So as there was an requirement i tryed to activate the business content object ,that is 0mat (MATNR) material number,
but once done with the installation when i try to find the object and display it
that is i select the object 0mat , context menu and say display or change it does not show the complete screen as it appears for a characterstic and gives a error
"_settings for material number conversion not found"_*
so please help me out what is the problem
ThanksThanks Subash Balakrishnan for replying,
but let me inform you that i already did that as i need to install this object and now the object is showing with green instead of grey,
Now my problem is that after selecting grouping and collection when i go to infoobject menu under modelling and find out the object 0mat, it shows in green , but as i need to observe the properties of this object like data type , length etc , i select the object 0mat and right click and select display,
then instead of showing me the object properties screen it gives me the error as mentioned above,
so as you say it has to be in active versoin , but i can not view the normal screen which appears after creating any object ,
now i hope my problem is quiet explanatory so please help me.
Thanks -
Error while activating PM Business Content DSO 0PM_DS01
I am trying to activate the Business Content for PM (Plant Maintenance). I wasable to activate the cubes without any problem.
But when I tried activating the DSO 0PM_DS01, the installation is failing while activating the DSO with the message. "You are not authorised for Infosource 80PM_DS01"
Has anybody else also faced a similar error?
TIA
AbhishekHi,
Please stop posting multiple threads for the same post :
Unable to activate the DSO in PM Business Content
Suggest you close out one thread and just keep one active.
Cheers,
Kedar -
Error in transfer structure while activating the business content
Hi all
we got the following error while activating the transfer rules( business content) :
1)error when determining a number from object BI_TSDTEL and number 01
2) object name can only contain characters from syntactical character set.
3) data element for infoobject WAERS 0CURRENCY could not be created.
can anyone please explain what is this error.Hello Tilak,
Goto SE37 -> RSAR_TRANSTRUCTURE_ACTIVATE -> Transfer Structure Name -> Execute
If the above doesn't fix then try the below
Goto SE14 -> Transfer Structure Name -> Adjust and activate .
This will fix if there is any inconsistency in the transfer structure.
[Thanks|http://chandranonline.blogspot.com/]
[Chandran|http://chandranonline.blogspot.com/] -
Hi Friends,
I am getting this error while activating the Cube ,I'm not able to see update rules after activated in the Modelling.. My using 7.o but working on 3.x version, with support package 15.
When i stimuldate following are the errors:
80BP_ID not maintained
Data source 0DBDUNS_IMPORT_ATTR not maintained
Error while reading InfoProvider 0SD_O01 etc...
Please help me out from this error since two days i'm tryhing to resolve but i'm not able to activate...Hello,
Go to business content, select the Infoprovider which you intend to install, select the before after option. Then say install & ignore the warnings & say yes. If still you are not able to view the update & transfer rules there might be some issues in the source system.
1] Check in rsa 6 that the datasources feeding to your cube are avialable or not.
2] Check the same is been replicated in BW or not.
3] The time stamp from both source system & BW system should match, otherwise replicate it again.
Hope this helps.
Regards,
Atul... -
Error InfoObject inactive while activation of Business content for cube
I am facing error "InfoObject 0COMP_CODE is not available in active version" while simulate installation of business content of cube 0FIGL_C10. Please guide me for the same.
Edited by: Nilesh Vakil on Jul 15, 2010 1:07 PMHi Sriniva and All,
I have been trying to activate business content- info objects catalogue, and have been gettin the below errors. I have activated ocomp-code and checked it with transaction sm37, and it says the job has finished.But i am not sure if i have to activate all the info objects thereof one by one.
EDI: Partner profile not available 1
Source system E33CLNT003: No authorization for remote activation of DataSources
Source system T90CLNT090 is inactive
Object '0CUSTOMER_ATTR BM_GIS_DAT' (ISMP) of type 'Transfer
Rules' is not a
I hope to hearing from someone soon !
-- Armstrong Kwakye -
What should be needed for cost reports to be activated in Business Content?
Hi experts,
I am completely new to Business Content so sorry if I ask a silly question. Currently we are trying to migrate custom fixed queries to queries from Cubes in Business Content, because the company has growed in the past years.
Our first stage is to have the new queries that report costs for the company.
The reports should consider manufacturing costs such as
- maintenance
- outsourced special services (providers)
- new machinery
(not energy or service costs)
This reports should include country, plant, date, amount, etc.
I have been searching for the modules or cubes that should be activated for this requirement. So far i found that in MM there is a cube 0SRV_C01 that includes external services.
The data from the InfoCube External Services enables you to carry out analyses of services. Using this data, you can obtain answers to questions such as the following: "How much of each service was ordered from a certain vendor?" "What was the order value per service for a certain plant?"
However there should be another information where manufacturing costs could be exploited.
¿Can anyone give me some advice on how to resolve this requirement? ¿ does anyobody know which cube(s) include the information I am looking for?
Thanks,
help wilHi David,
Check here...........
BI Content
http://help.sap.com/saphelp_nw70/helpdata/en/3d/5fb13cd0500255e10000000a114084/frameset.htm
SCM BI Content
http://help.sap.com/saphelp_nw70/helpdata/en/29/79eb3cad744026e10000000a11405a/frameset.htm
Procurement
http://help.sap.com/saphelp_nw70/helpdata/en/e9/62073c44564d59e10000000a114084/content.htm
Invntory
http://help.sap.com/saphelp_nw70/helpdata/en/fb/64073c52619459e10000000a114084/frameset.htm
Regrads,
Vijay. -
Error in Query Activation from Business Content
Hi Gurus,
I'm having problems when I'm activating Query 0FIGL_VC1_Q0001 (Financial Statement and P&L: Actual/Actual Comparison) under Virtual Cube (0FIGL_VC1). Everytime I activate it, it displays these errors 1. Error when activating element 2GXNYXWAV1FOYLM46UJ2U2Q2D , 2. Error when activating element 2LOL3P78C15MAEBIFHL8MNR7R, etc.
Then when I look at the query elements, I noticed that not all elements (Structure, Formulas, etc) are activated and it displays this message "Is existentially required by : 0FIGL_VC1_Q0001 [ELEM]". Although when I search for the elements in the Business Content to activate them it seems that these elements do not exists. Please advice. Thank You.
- kitHi
Check if the Query : 0FIGL_VC1_Q0001 has all the Query Elemenst(Restricted Keyfigures, Calculated Keyfigures etc) have D version to install.
You can also check in the Source System if all the Query Elements corresponding to the Query are transported in D-version.
If something is missing do transport it agian.
Regards, Hyma -
Activation of Business Content Datasources in CRM Source system
Hi,
My Requirement is to activate all Datasources in CRM Develoment server.I have select the entire node in RSA5 and click "Activate Datasources".But for each Datasources system is askin for develoment request.Is there any procedure to activate all Datasources with single Development Request.
Regards
VishalThis section describes the general settings necessary for BW Integration in CRM.
If CRM is not involved in your scenario skip this section.
Transferring Application Component Hierarchy (CRM)
Procedure
This step has to be carried out in the CRM system.
IMG Menu Integration with Other mySAP Components  Data Transfer to the SAP Business Information Warehouse  Business Content DataSources  Transfer Application Component Hierarchy
Transaction code RSA9
Confirm the security check: Do you want the content application Transfer Component Hierarchy? with YES.
If a dialog box appears requesting the user to enter a development class, enter a development class in the customers namespace and choose Save or choose Local object.
If no error message is sent the application component hierarchy has been transferred successfully.
Cross Connectivity:
It describes all settings that are necessary to connect the components of the SAP.system landscape with each other. The settings for each combination of two components to be connected are described in a separate structure node. The separate section headings make it possible to identify the activities required to connect certain components with each other. The section headings for components that are not part of the installation can be skipped
Connecting SAP BI with SAP ERP, SAP CRM
Procedure
To carry out the activity, choose one of the following navigation options in the SAP BI system:
Transaction Code RSA1
SAP BI Menu Modeling  Data Warehousing Workbench: Modeling
1. Choose Modeling.
2. Choose Source Systems.
3. Select SAP in the window on the right.
4. Choose the Context menu (right mouse click).
5. Choose Create.
6. Make the following entries:
Field Entry
Target computer (server) Server of the SAP ERP, SAP CRM or SAP SRM system
System ID System ID of the SAP ERP, SAP CRM or SAP SRM system
System number System number of the SAP ERP, SAP CRM or SAP SRM system
Background user in source system RFCUSER
Password for source system welcome
Background user in BI RFCUSER (can not be changed in this activity)
Password for BI user welcome
9. On the dialog box Please log on as an administrator in the following screen choose Continue.
10. Log on to the Source System with your administrator user. Choose the correct client.
11. On the dialog box New Source System Connection choose Continue.
12. On the Replicate Metadata dialog box, choose Only Activate.
The building block CRM Lead Analysis describes the all the required activities to analyze the Marketing Lead Analysis data from SAP CRM in SAP Business Information Warehouse.
The analysis is carried out with the following queries of the InfoCube 0MKTG_C01 CRM - Lead Management (SAP BW Business Content).
The Lead Management InfoCube contains all the characteristics and data used for the administration of leads. This InfoCube enables you to execute the following standard queries available in SAP BW:
1. Channel Analysis: This query is used to determine the best channels by which business partners are contacted in the context of a marketing campaign. Following each marketing campaign, the lead manager can compare the success of a given channel to those of others.
2. Efficiency Reporting: This query is used to analyze the efficiency with which leads are qualified. By navigating to the sales organizations and the responsible employees for the leads, it is possible to assess how efficiently lead teams are working and to identify areas for improvement.
3. Historical Evaluation: Use to help analyze and compare leads over different intervals (comparison of different quarters or years for example) to see if general characteristics in the processing of leads can be identified for these periods.
4. Lost Leads: Provides an overview of the number of lost leads in a particular period and the reasons (implemented as a navigation characteristic) for the loss of the leads. This query is used to analyze the main reasons why leads might be lost, with a view to developing new strategies for overcoming these weaknesses.
5. Channel Mgmt.: Top-n Lost Leads (Current Year): In a Channel Manager Portal, this query provides an analysis of the leads lost by a Channel Manager over the past 12 months. Channel Managers can also view the leads lost by their Channel Partners. In a Partner Portal, this query shows the top-n unsuccessful leads distributed by a Channel Manager to a Channel Partner. Partner Manager can see the lost leads of the Partner Employees over the year. Partner Employee can view his lost leads over the year.........
Before starting activities in this building block, you need to perform or check the following steps:
1. From the BW Connectivity building block the following activities have to be completed:
a. Local Settings è SAP CRM: all activities have to be completed.
b. Local Settings è SAP BW: all activities have to be completed.
c. Cross Connectivity è Connecting SAP BW with SAP R/3, SAP CRM, SAP SRM: Connect your CRM System.
2. From the General Settings for BW Integration building block the following activities have to be completed:
a. In section General Settings in CRM all activities have to be completed.
b. In section General Settings in SAP BW all activities have to be completed.
Hope it will helps you........ -
TIPP Taxe (Transport Taxe) activation in Business Content?
Hello,
I want to know if there is possible to active TIPP Taxe (Transport Taxe) in Business Content? Thks for your answer!!
Edited by: Gaudenzio on Jul 1, 2009 11:25 PMChances are that the transport tax is merely a General Ledger account on your Chart of Accounts and would be captured when extracting the data on the 0FI_GL_4 and/or 0FI_TX_4 extractor. At least that's the only recollection that I have when it comes to transport taxes in FI.
-
Locks During Object Collection & Activation in Business content in NRIV
Hi,
During the Collection & activation of InfoObjects (Business Content) the systems get locked. looks like a dead lock in DB01 with table NRIV
We are on MSSQL 2005 SP3
Does anyone encountered this..???
All of the OSS notes i found talks about the Number Range but no solutions so far.....
Please Help.....Hi
Database locks: Snapshot data about exclusive wait situations for database locks can be obtained
from the Database Lock Monitor (DB01). If exclusive database lock waits occur, document the locked
object, lock holder (program/transaction) and lock waiter (program/transaction).
Slide 24--
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0477d70-5082-2910-e49a-e53ea6d4c893
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/0667b7c9-0e01-0010-e4a3-873e87656048
Re: Trace all processed ABAP statements
Maybe you are looking for
-
Polish characters are overwriting in PDF mail
Hi All, I am mailing a PDF document which is genereated through a SAP script in which some polish characters are being used . The problem is when i am cretating PDF through spool , polish characters are printing fine but when i am creating PDF throu
-
I've been using LR3 for quite some time now, but just yesterday I ran into a major difficulty. When attempting to use the adjustment brush on a DNG photo, the entire photo immediately disappears into grey. If I move between images in the develop mod
-
Defragmentation of /var/lib/pacman/ (reiserfs)
on my laptop i run arch from 0.4 and since then i have over 1200 packages installed. i used reiserfs and realized now, that it accumulated a certain amount of fragmentation over time and is now accessing /var/lib/pacman/ very slowly (that's why pacma
-
I did not wwant to subscribe to icloud.. i did by accident, i want my money back, how can i do that
-
What is your favorite transaction and why?
Just wondering what your secret tools are... Willing to share? Transactions you use all the time, and without them you would be, uh, toast... My favorite one is SE84 Repository Information System. I use it regularly to find objects in repository, lik