Reg: Advantages from 4.6c to ECC 6 in terms of security

Hi,
Here I need inputs about the recommendations on different functionality or the advantages from 4.6c to ECC 6 in terms of Security.
So please give your inputs about the additional functionality and advantages
Thanks in advance.........
Regards,
Srini.

Hi Sirni,
A lot of difference from 4.6 to ECC6 with future wise and security wise.
You can see the complete details in help.sap.com
Rgards,
Anil

Similar Messages

Reg: PO interface from 4.7 to ECC 6.0

Hi Everyone,
I'm new to ALE/IDOC, Can anyone give the steps which needs to be followed to send POs thru IDOC from 4.7 to ECC 6.0.
Do I need to populate all the data like control segments, data segments or PO related details will be sent thru IDOC if we pass a particular details of that PO?
Pls give me some tips to proceed...

Hi,
You can use the IDOC Type: ORDER05 for this PO reqt. For PO the 850 EDI is used.
You need not fill in all the data for the segments, but only the mandatory fields & segments and along with some header details like Pur Org, vendor No, plant etc.
Based on some of the mandatory parameteres you fill in, it will be validated with the config already done in the SAP system.
Pls got to WEDI (Adminstrator Menu)- type it as a T-Code and you can go thru the details.
Apart from this the RFC destination needs to be set up in SM59 and the logical system settings in WE20 along with the port settings in WE21 has to be carried out.
Hope this helps.
thanka
JLN

What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridhar

Hi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Error while deploying a PAR file from NWDS into an ECC.

Hi all,
I am getting this error while deploying a PAR file from NWDS into an ECC.
Operation Failed: Please make sure the server is running or check the log (sap-plugin.log) for
more detail.
My server is running properly
1 - Where is sap-plugin.log file? I don´t find it.
2 - Could there be another file with another name with information about the error?
3 - Is there another way to deploy the file directly from the ECC?
Regards,

Hi,
Just make sure you have maintained correct server setting to check the same open the NWDS and follow this path
Windows/ Prefereces / SAP Enterprise Portal
Check the following enteries
Alias
Host
Port
Login etc.
Regards,

Error while RRI from BW reports to ECC CJI3 transaction

Hi All,
When we try to set up RRI from BW reports to ECC CJI3 transaction, we get an error message (Stop message):
You cannot use the report-report interface to call up report RKREP000
Diagnosis
Line Item report RKPEP000 is not suitable for the report/report interface
Procedure
Always enter RKPEP000 as the receiver report for project line items in the report/report interface. This program uses the transfer parameters to determine which line item reports can be accessed.
<b>As per the other reply tried the ABAP Report RKPEP000/3 also ..no use ..
can you please suggest , how to go about this CJI3 issue for RRI , what settings need to be done in the RSBBS ...</b>
We have attemped to use "S_ALR_87013543" as well but the parameters don't go through properly which means when a user jumps from a BW report, they end up at the ECC selection screen of S_ALR_87013543.
Drill through is working for our Cost Center reports. Just not this one in particular.
Any advice would be greatly appreciated.
prasad

Hi,
I'm facing the same problem so please If you have found some solution please tell me what should I do to use RRI from BEX query to CJI3 transaction.
Regards,
Ana

Data Migration from Legacy system to ECC systems via ETL through SAP PI

Hi All,
I wanted to know if we can migrate the data from Legacy systems to ECC systems via PI.
What I understand is there is ETL tool is used to extract the data from legacy system, and what client is looking to load that data via PI?
Can we do that ? I am concerned because this will involve mass data?
If I have to use PI , I see option of PROXY / IDOC /FILE as receiver in ECC system (take the data from ETL)?
Can somebody has done this earlier , please share the approach.
Thanks,
Pushkar Patel

Hi ,
I require few details from you.
1. What ETL tool you are using, If Informatica, it already have PowerConnect to connect to SAP. So you can create source and Target Structure and also you can use RFC's to send data to R/3. Else, for other ETL tools, can you prepare RFC's or any other way to send data to R/3. let me know the tool.
2. Does R/3 contains the master data tables? If yes, then try to use LSMW for Mass upload of data to tables.
If your client don't want to use either of these options please elaborate, what is the case.
Regards
Aashish Sinha

Interview questions on upgrades from 4.7 to ECC

Hi,
Can any one please post some potential areas/questions that will be asked for upgrade projects from 4.7 to ECC6.0
Points will be awarded.
Thanks

Hi Frank,
this is good question, why because sap upgrades from 4.6b to ecc 6.0 is very risky.
take one example , in 4.5b , me21n application having 620 screen where as in ecc 6.0 having 9000 screen . that time we will take care of it.
check the obsolete function modules , 4.5b , having ws_upload, ws_download.... use cl_gui_frontend_services , under these having differnt type of methods.
once you change the code in ecc , go to tranx : SLIN check the error where it is exact.

Error during Upgrade from 4.6c to ECC 6.0

Hi All,
We are facing an error when upgrading from 4.6c to ECC 6.0. We are facing this error on the table COEP - runtime object inconsistancy. What we found is there is ERP upgrade has created new extra fields in the table. In log file the error is specified as : Duplicate Field name, But we not able to find the duplicate field name in the table. Please kindly help as early as possible. The upgrade process is stuck.
Regards
Anil Kumar K

Hi Anil,
Is this issue fixed? Can i know how you fixed it?
replied to your message Re: How to adopt the index changes during upgrade.
Thanks,
Somar

Unicode error while upgrading from 4.7 to ECC 6.0

Hello all,
I am upgrading our SAP from 4.7 to ECC 6.0. while doing so we had folllowing error in the adjoinig statement of Search.
Error : Table I_VBLS must have a character line type (data type C,N,D,T or string)
Statement :
W_TMP10 = I_VBLS-VBELN.
SEARCH I_VBLS[] FOR W_TMP10 STARTING AT 1
IF SY-SUBRC NE 0.
   EXIT.
ENDIF.
Now I tried to remove this error by putting a loop on internal table I_VBLS and inside it concatenating the header line with a Field symbol and after that to a string variable. Then I used SEARCH statement for the same string. but unfortunately this is changing the functionality of the program by large extent. Does anybody know the exact code snippet to replace search Internal Table
Edited by: Aalhad Deshpande on Feb 23, 2009 3:18 PM
Edited by: Aalhad Deshpande on Feb 23, 2009 3:19 PM

Hi,
Try to use this method.
CALL METHOD CL_ABAP_CONTAINER_UTILITIES=>FILL_CONTAINER_C
E:G :-
        WRITE crlf TO i_linea-linea2.
In this case also their are not mutually convertable. try to use this method and let me know
        CALL METHOD CL_ABAP_CONTAINER_UTILITIES=>FILL_CONTAINER_C
          EXPORTING
            IM_VALUE               = crlf
          IMPORTING
            EX_CONTAINER           = i_linea-linea2
          EXCEPTIONS
            ILLEGAL_PARAMETER_TYPE = 1
            others                 = 2.
Regards,
Sathish

Unicode error while upgrading from 4.6 to ECC 6.0

Dear All,
I am getting unicode errror while upgrading from 4.6 to ECC 6.0, when iam trying to open downloaded file in excel.
In debugging, error occurs while executing statment "CALL METHOD OF obj_ex_sheet " in the code given below:
FORM open_downloaded_file_in_excel            *
FORM open_downloaded_file_in_excel.
DATA:
    lv_ole_books       TYPE ole2_object,
    lv_ole_sheets      TYPE ole2_object,
    lv_subrc           LIKE sy-subrc,
    lv_title(70)       TYPE c,
    lv_text1(70)       TYPE c,
    lv_text2(70)       TYPE c.
start excel
CREATE OBJECT obj_ex_sheet      'EXCEL.SHEET'.
IF sy-subrc NE 0.
    lv_subrc = sy-subrc.
    FREE OBJECT obj_ex_sheet.
    PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
CALL METHOD OF obj_ex_sheet     'Application' = obj_ex_app.
IF sy-subrc NE 0.
    lv_subrc = sy-subrc.
    FREE OBJECT obj_ex_app.
    FREE OBJECT obj_ex_sheet.
    PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
SET PROPERTY OF obj_ex_app 'Visible' = 1.
open data file: main file
CALL METHOD OF obj_ex_app        'Workbooks' = lv_ole_books.
CALL METHOD OF lv_ole_books      'Open'       = obj_ex_wbook
    EXPORTING #1 = gv_filename
              #2 = 2
              #3 = 0
              #4 = 1
              #5 = 0
              #6 = 0
              #7 = 1.
IF sy-subrc NE 0.
    lv_subrc = sy-subrc.
    FREE OBJECT obj_ex_wbook.
    FREE OBJECT obj_ex_app.
    FREE OBJECT obj_ex_sheet.
    PERFORM error_handling_ms_excel USING lv_subrc.
ENDIF.
FREE OBJECT lv_ole_books.
CALL METHOD OF obj_ex_wbook      'Worksheets' = lv_ole_sheets.
CALL METHOD OF lv_ole_sheets     'Item'       = obj_ex_wsheet
    EXPORTING #1 = 1.
FREE OBJECT lv_ole_sheets.
GET PROPERTY OF obj_ex_wsheet    'UsedRange' = obj_ex_usedrange.
CALL METHOD OF obj_ex_usedrange 'AutoFormat'
    EXPORTING #1 = 18.
SET PROPERTY OF obj_ex_wsheet    'Name'       = sy-tcode.
FREE OBJECT obj_ex_usedrange.
PERFORM free_ole_objects.
CALL FUNCTION 'FLUSH'
       EXCEPTIONS
            OTHERS = 0.
ENDFORM.
regards,
Divya

hi,
In the OPEN DATASET STATEMENT ADD THE ENCODING ADDITION IN TEXT MODE.
Regards,
Balakumar.G
Reward Points if helpful.

Top-Down Distribution - tcode KE28 (release upgrade from 4.6 to ECC 6.0)

All,
we are performing a release upgrade from 4.6 to ECC 6.0 and we have a problem with the tcode KE28.
The variant already set up in the system don't match with the selection fields present in the screen, and the following message is shown:
Message no. KG346
The variant does not adhere to the current Customizing setup
We have saved the variant again, and no problem are present, but the error message refers also to Customizing setup.
Is there a section in the Customizing where it is possible set up the field to show in the initial screen or the new fields (All Valuation Views, Legal Valuation View and Profit Center Valuation View) are due to the release upgrade?
If yes, do you know the transaction/path?
Thanks in advance for your collaboration.
Regards,
Jody Mancini.

Hi Satish,
Now i am sending some URL for Functional upgrade
May be those are all useful toyou
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/transactionsChangedinECC6.0
http://solutionbrowser.erp.sap.fmpmedia.com/Default.aspx
https://www.sdn.sap.com/irj/scn/wiki?path=/display/erp6/
Regards
Surya

Asset query execution performance after upgrade from 4.6C to ECC 6.0+EHP4

Hi,guys
I am encounted a weird problems about asset query execution performance after upgrade to ECC 6.0.
Our client had migrated sap system from 4.6c to ECC 6.0. We test all transaction code and related stand report and query.
Everything is working normally except this asset depreciation query report. It is created based on ANLP, ANLZ, ANLA, ANLB, ANLC table; there is also some ABAP code for additional field.
This report execution costed about 6 minutes in 4.6C system; however it will take 25 minutes in ECC 6.0 with same selection parameter.
At first, I am trying to find some difference in table index ,structure between 4.6c and ECC 6.0,but there is no difference about it.
i am wondering why the other query reports is running normally but only this report running with too long time execution dump messages even though we do not make any changes for it.
your reply is very appreciated
Regards
Brian

Thanks for your replies.
I check these notes, unfortunately it is different our situation.
Our situation is all standard asset report and query (sq01) is running normally except this query report.
I executed se30 for this query (SQ01) at both 4.6C and ECC 6.0.
I find there is some difference in select sequence logic even though same query without any changes.
I list there for your reference.
4.6C
AQA0FI==========S2============
Open Cursor ANLP                                    38,702 39,329,356 = 39,329,356      34.6     AQA0FI==========S2============   DB     Opens
Fetch ANLP                                         292,177 30,378,351 = 30,378,351      26.7    26.7 AQA0FI==========S2============   DB     OpenS
Select Single ANLC                                  15,012 19,965,172 = 19,965,172      17.5    17.5 AQA0FI==========S2============   DB     OpenS
Select Single ANLA                                  13,721 11,754,305 = 11,754,305      10.3    10.3 AQA0FI==========S2============   DB     OpenS
Select Single ANLZ                                   3,753   3,259,308 = 3,259,308       2.9     2.9 AQA0FI==========S2============   DB     OpenS
Select Single ANLB                                   3,753   3,069,119 = 3,069,119       2.7     2.7 AQA0FI==========S2============   DB     OpenS
ECC 6.0
Perform FUNKTION_AUSFUEHREN     2     358,620,931          355
Perform COMMAND_QSUB     1     358,620,062          68
Call Func. RSAQ_SUBMIT_QUERY_REPORT     1     358,569,656          88
Program AQIWFI==========S2============     2     358,558,488          1,350
Select Single ANLA     160,306     75,576,052     =     75,576,052
Open Cursor ANLP     71,136     42,096,314     =     42,096,314
Select Single ANLC     71,134     38,799,393     =     38,799,393
Select Single ANLB     61,888     26,007,721     =     26,007,721
Select Single ANLZ     61,888     24,072,111     =     24,072,111
Fetch ANLP     234,524     13,510,646     =     13,510,646
Close Cursor ANLP     71,136     2,017,654     =     2,017,654
We can see first open cursor ANLP ,fetch ANLP then select ANLC,ANLA,ANLZ,ANLB at 4.C.
But it changed to first select ANLA,and open cursor ANLP,then select ANLC,ANLB,ANLZ,at last fetch ANLP.
Probably,it is the real reason why it is running long time in ECC 6.0.
Is there any changes for query selcection logic(table join function) in ECC 6.0.

Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query

Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
        INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
        FROM COSP CLIENT SPECIFIED
        WHERE GJAHR IN SELR_GJAHR
          AND KSTAR IN SELR_KSTAR
          AND LEDNR EQ '00'
          AND OBJNR IN SELR_OBJNR
          AND PERBL IN SELR_PERBL
          AND VERSN IN SELR_VERSN
          AND WRTTP IN SELR_WRTTP
          AND MANDT IN MANDTTAB
        GROUP BY (GROUP_LIST).
   LOOP AT I_COSP      .
     COSP                           = I_COSP      .
     PERFORM PCOSP       USING I_COSP-_COUNTER.
     CLEAR: $RWTAB, COSP                          .
     CLEAR CCR1S                         .
   ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.

Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
                   endselect.
   SELECT
into table
   for all entries in table
where.
   use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
    e.g in your case
          sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya

Runtime Error in VL01N after upgrade from 4.6c to ECC 6.0

hi,
   We are doing a upgrade project from 4.6c to ECC 6.0 and when we are running the VL01n tcode and as soon as we hit enter in easy access screen its throwing a runtime error as " The key of internal table "XLIPS" contains components of type 'X' or "XSTRING". The "READ TABLE XLIPS" statement is not permitted for such tables in a unicode context'. The xlips is declared as:
DATA: BEGIN OF XLIPS OCCURS 15.
INCLUDE STRUCTURE LIPSVB.
DATA: END OF XLIPS.
so i have checked the lipsvb structure in that i dont find the key fields of type X or XSTRING all are of type CHAR 4. this LIPSVB is the Reference structure for XLIPS and YLIPS.
THANKS IN ADVANCE.

Please see the Patch level of the SD, FI ,etc...
and apply it   the basis   should   find it out .... for ECC6.0   then minimum level of patches should be   upgraded.
please ,login to help.sap.com ... there in the search see the document   of the pateches for the   ECC6.0 for SD & FI ... like wise for all Modules ....
Reward points if it is usefulll ...
Girish

R/3 upgrade from 4.7 to ECC 6.0 and BW upgrade from 3.5 to 7.0

Is there a reason to upgrade Solution Manager from 3.2 to 4.0 when upgrading R/3 from 4.7 to ECC 6.0 and BW upgrade from 3.5 to 7.0?
And when in current situation Unicode UTF8 is used, could that give problems during / after the upgrade?

Hello ALex,
There is not a must to upgrade also your solman 3.2 when you upgrade your satellites, only consider if you need the solman diagnostic or not and also that the new functionality in solman 4.0.
Which system is unicode, the satellite?
There is also not problems having a non-unicode solman with unicode satellites and the other, having a unicode-solman "linked" to unicode-satellites.
Hope this helps,
Dolores

Reg: Advantages from 4.6c to ECC 6 in terms of security

Similar Messages

Maybe you are looking for