Reg : APO system administration

Hi all,
I am looking out for apo system administration books .I am basis guy,So can anybody share with me the docs and what all should a basis guy should know about apo systems.

Hi Ambarish annapureddy
As a basis task, liveCache management is one of the required task. (sometime CIF management also).
For SCM system management, SAP provides various documents so called "Best Practice document".
So I recommend you to check the documents that are available from following link.
URL : http://service.sap.com/solutionmanagerbp
(also this information is described in SAP Note 572003).
<I think following documents might be interesting for basis team>
1. Performance Monitoring for mySAP SCM 4.1 / 5.0
2. System Monitoring for SAP APO (3.x) / mySAP SCM (4.x/5.0)
3. Manage APO Core Interface in SAP APO (3.x) / mySAP SCM (4.x/ 5.0)
4. Internal and External Consistency for SAP APO 3.x and SAP SCM 4.x / 5.0
5. Monitoring and Administration for SCM / APO
6. Checklist for Recovery of SAP APO liveCache >= 7.4
If you application colleague do not know this document, I also recommend your application colleague to check the one of the related documents like following.
-Manage Demand Planning in SAP APO (3.x) / SAP SCM (4.x/5.x)
-Manage the Transportation Management Solution in SAP APO (3.x) / SAP SCM (4.x/5.x)
-Manage Global ATP in SAP APO (3.x) / SAP SCM (4.x / 5.0/5.1)
-Manage Production Planning in SAP APO (3.x) / mySAP SCM (4.x/5.0)
-Manage Supply Network Planning & CTM in SAP APO (3.x) / SAP SCM (4.x/5.x)
-Manage APO Core Interface in SAP APO (3.x) / mySAP SCM (4.x/ 5.0)
-Internal and External Consistency for SAP APO 3.x and SAP SCM 4.x / 5.0
best regards
Keiji Mishima

Similar Messages

Reg: Web Dynpro Test Tools under System Administration - Support

Hello Guru's,
I came across Web Dynpro Test Tools under System Administration - Support
And I have these options there:
1. Application Integrator Tests
2. OBN Web Dynpro Tests
OBN Source
OBN Target
3. Web Dynpro Page Builder Tests
I want to know how to test the OBN and other tests under that.
Any help is highly appreciated.
Thanks & Regards,
Pramod

Closing the thread no longer working on the issue.
Cheers-
Pramod

System administrator - consumer grp

Dear all
I need help in reg to consumer groups
when It will used, in wat situation it comes into picture in production database or i need metalink document id for understand better abt the concept of consumer groups in concurrent manager.
please reply on this topic.
bye
James

Check the following links/notes:
"Oracle Applications System Administrator's Guide - Configuration"
http://download-uk.oracle.com/docs/cd/B25516_14/current/acrobat/115sacg.zip
Note: 394562.1 - How to Setup Resource Profiles for Concurrent Managers to Limit CPU Usage?
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=394562.1

All Open Sales Orders in APO system

Hi Experts,
We have a requirement in which we have to get all open sales orders in SAP APO system for 2013. Please suggest if there is some way to do this.
Thanks in advance.

Hi Manjunatha,
RRP1 will list all the requirements: sales orders, forecast, dependent demand, putchase order release, etc.
Same than in all the ALV reports, you can change the layout, sort, use filters in order to only see the document that you need, etc.
Here you can an example of my system, where you have sales orders in RRP1:
Kind Regards,
Mariano

Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Calculation Services    2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Web Access              6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office...
2.the event in event viewer is:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2014/10/10 9:49:43
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ***.net
Description:
An account failed to log on.
Subject:
Security ID:  NULL SID
Account Name:  -
Account Domain:  -
Logon ID:  0x0
Logon Type:   3
Account For Which Logon Failed:
Security ID:  NULL SID
Account Name:  ***
Account Domain:  ***
Failure Information:
Failure Reason:  An Error occured during Logon.
Status:   0xc000006d
Sub Status:  0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port:  63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length:  0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
    <EventRecordID>37602685</EventRecordID>
    <Correlation />
    <Execution ProcessID="532" ThreadID="26096" />
    <Channel>Security</Channel>
    <Computer>***.net</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">***</Data>
    <Data Name="TargetDomainName">***</Data>
    <Data Name="Status">0xc000006d</Data>
    <Data Name="FailureReason">%%2304</Data>
    <Data Name="SubStatus">0x0</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">
    </Data>
    <Data Name="AuthenticationPackageName">NTLM</Data>
    <Data Name="WorkstationName">***</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">***</Data>
    <Data Name="IpPort">63664</Data>
</EventData>
</Event>

Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support

Getting error while opening a saved for later notification: The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action.

Hi All,
While opening a saved for later notification, we are getting "The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action". error.
This is a custom notification.
Please help.
Thanks
Raghava

HI All,
Please help on this issue.
Thanks
Raghava

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." I am the sole user- please help.

I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit). It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

This is a Microsoft Windows Issue.
From a MS Support Engineer:
"Hi,
·        Is the computer on a domain?
·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
Try the steps below and check if it helps.
Step 1:
Run the software setup file as an administrator and check if it helps.
a. Right click on the setup file of the software that you are trying to install.
b. Select “Run as administrator”.
Step 2:
Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
Disable antivirus software
Warning:
Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
Step 3:
a. Click Start, type "Local Security Policy" (without quotes) and press enter.
b. Click on Software Restriction Policies.
c. In the right pane, double click on the "enforcement".
d. Select “All users except local administrators”.
e. Click Ok and restart the computer and check if the issue is fixed."

Can't Open Server Manager - don't have System Administrator Rights

Hi,
I am new to BPC
After i updated the support patch to BPC 7.5 MS SP3 , pack level 2
and Restart the server
Then Server Manager can't open again.
Error Message :
This ID (xxxxxx) don't have System Administrator Rights; you must log on with a user ID that has system administrator privileges
But I have logon the user which is used to install BPC
I have try to restart the service, but it is not working .
Any method reset it ? or solve it?
thx
John

Dear Kong Chong Shun,
From your information, I'm sorry I could not get several information. Did you upgrade your BPC Clients too, lets say BPC Administrators ?.
Kind Regards,
Wandi Sutandi

Unable to Log in. Please see your System Administrator. Laptop chucks Spack

Hi all,
Got great responses from people in my first post recently, but before I managed to try any of them, my laptop chucked a spack attack.
It will start up, and get to the Log in Window, but when I type in my password (yes, it is the right one...) I get a message which says something like, 'There is a Problem logging in. Please see your System Administrator'. I can't remember the exact wording, but it is pretty much that.
Unfortunately, I am the System Administrator, and I'm using the only log in and password attached to the computer. So I've got no idea how to get into it. A friend suggested I start it up in target disk mode from another computer, but I've got Filevault turned on, so I suspect I'm going to have the same problem.
Recently installed an Apple security Update, but thats the only thing that has changed.
Any suggestions very welcome, as it has been about five days now.
Thanks,
Jonathan

Hi Jonathan!
Have you tried resetting the Admin PW?
To reset the administrator password using the Mac OS X CD:
1. Insert the Mac OS X Install Disc 1 CD and restart the computer.
2. When you hear the startup tone, hold down the C key until you see the spinning gear.
3. When the Installer appears, choose Installer > Reset Password.
4. Follow the onscreen instructions to change the password.
5. Quit the Installer and restart your computer while holding down the mouse button to eject the CD.
Copied From Changing your administrator password
Good Luck!
ali b

Business rule in MDS 2012 error: A database error has occurred. Contact your system administrator.

I get the following information in my MDS log as well as the above error message when I execute a business rule that has a condition of AND and an Action of Attribute must be unique in combination with 2 other attributes.
I'm running SQL Server 2012 11.0.3000
MDS database version 11.1.0.0
Any ideas?
MDS Error: 0 : SqlException message: A database error has occurred. Contact your system administrator.
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.HandleExceptions(Exception ex)
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteDataSet(String spName, CloseConnectionBehavior closeBehavior, Object[] parameterValues)
at Microsoft.MasterDataServices.Core.DataAccess.MasterDataAccess.<>c__DisplayClass5.<ValidateEntityMembers>b__4()
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteMethodWithDeadlockProtection(MethodDelegate method)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.ValidateMembers(Int32 versionId, Identifier entityIdentifier, IList`1 memberIds, RequestContext context, OperationResult results)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.Process(ValidationProcessCriteria criteria, Boolean commitVersion, Boolean validateEntityAsync, Boolean returnValidationResults, RequestContext context, OperationResult results)
SQL Error Debug Info: Number: 208, Message: Invalid object name 'cteDuplicates0a070e37b106b9e3efe35a455076efa7'., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: , Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpBusinessRule_AttributeMemberController, Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpValidateMembers, Line: 0
DateTime=2013-08-15T13:25:15.6684023Z
MDS Error: 0 : <ArrayOfError xmlns="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Error>
<Code>208</Code>
<Context i:nil="true" />
<Description>A database error has occurred. Contact your system administrator.</Description>
</Error>
</ArrayOfError>
DateTime=2013-08-15T13:25:15.7152026Z

OK I bit the bullet and contacted support on this one.
There is a known issue with MDS 2012 and business rules with a combination of "must be unique" attributes. If you do not list the attributes in the same order that they were created you will get the generic error I cited. At first they told me it must be
in the same order the attributes are in and that worked on one entity but not the other. The difference was that in the second entity I previously rearranged the attributes in question. Once I changed the order in the business rule to reflect the *original*
order it worked like a champ.
Hopefully this helps save someone some time and money.

Stock value is not getting updated in APO system From ECC automatically

Hi All,
Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
for this we are using EXIT_SAPLCSTK_001.
I am using VL10A for delivery and VL06G for PGI
I have also checked integration model for material and stock.
Please help me out as it is very urgent.
Thanks,
Gaurav Mittal
Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PM

Hi,
for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
please check the same.
if this does not help, let me know in detail the steps which you are following..
Ram

To load data from a cube in SCM(APO) system to a cube in BI system.

Experts,
Please let me know whether it is possible to load data from a cube in SCM(APO) system to a cube in BI system.If so explain the steps to perform.
Thanks,
Meera

Hi,
Think in this way,
To load the data fro any source we need datasource Ok. You can genare Export data source for Cube in APO, then use that datasource for BW extraction, try like this. I think it will work, in my case I'm directly loading data from APO to BW using the DataSource sthat are genaraed on Planning Area.
Why you need to take data from APO cube?. Is there any condition for that?. If it is not mandatory, you can use the dame datasource and load the data to BW, if they have any conditions while loading the data from APO to APO cube, they you try check wherther it is possible in BW or not. If possible then you use DataSource and do the same calculation in BW directly.
Thanks
Reddy

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Cannot delete login item "You cannot change this item because it's managed by your system administrator"

We migrated a server (ldap and file serving) to some new machines, which have new names. We've got all of the login and file sharing functionality working on the new machines, but wherever we have a mount of a share in the Login Items for a user, we can't get the old machine out of the Login Items. It's not fatal, but it does make login take a lot longer because it has to fail first.
We can mount the share from the new server, and save THAT in a NEW Login Item just fine -- it's just that when you click on the old defunct one the minus sign is greyed out, and the mouseover says "You cannot change this item because it's managed by your system administrator." There is a yellow triangle next to the item in the list. Went into the user's ~/Library/Preferences/com.apple.loginitems.plist and it's not in the file. The /Library/Preferences don't have anything that looks like a plist of the right name.
Where do I find it and how do I get rid of it?

In response to ManishBhatt94's post today, I may have some information that may be useful to you. I called Microsoft's 800-642-7676 and spoke with a technical representative with questions pertaining to my particular issue. I also have friend that has the
same issue with her computer running windows 8. A representative from my ISP told me how to go into 1)Tools, 2)Internet Options, 3)Connections, 4)LAN settings and uncheck the proxy settings box. However after restarting or shutting down my computer it reappears.
It will also reappears while I play games on Facebook not allowing me continue until I go back into the proxy settings in LAN and uncheck the box AGAIN and AGAIN. A local owner of a computer repair shop told my friend that it was a virus. After speaking with
Microsoft today I was told the same thing/it was more than likely a virus on my personal PC at home. As most people likely do, I use wireless internet in my home on the affected computer. Solution; as suggested by Microsoft rep was to have the virus
professionally removed either by someone or to use their remote service for a fee of $149 which comes with several guarantees and does not require you to re-install software or documents. I hope that my response was of some help to you. I also kept trying
to fix this problem but wasted a lot of time. He also suggested to Google the proxy problem to see if ANYONE has any alternatives to fixing this problem!

How to reverse menu or function exclusions for a system defined responsibility like System Administrator??

Hi Experts,
One of our students have excluded the responsibility define function and user define function from the "System Administrator" responsibility in our test instance, which resulted in disabling of responsibility creation and user creation form. Can anyone here explain how to resolve this issue??
Thanks.

Your DBA should be able to help you..........

Reg : APO system administration

Similar Messages

Maybe you are looking for