Reg:- Auxiliary materials for Fleet objects

Hi Gurus/Friends
Here i have an issue reg the Assignment of Auxiliary materials to the Fuel types.
I did testing with assigning the materials in Testing but .....
Can i know the assignment of Auxiliary materials to the fuel types is done separately in development and Production.
Please reply.......
Regards
Kumar

Hi Friends
What u guys suggested is correct...
But we need to assign the material master to the Fuel type ,where the material master is not transportable .
The material which we assign to fuel type will not be transportable ,but the assignment will be transported.
we cont say that the same material no will be generated at the time of creation of material master in quality and Production.
So please suggest me whether we need to assign the material no in the Quality and Production.
Regards
Kumar

Similar Messages

Message created when Liecense expiry is finised for fleet object

Dear All ,
In fleet Master Data we are maintaining MVOE (Motor vehicle operating expiry ) Every year it has to be renewed
My Requirment is we are maintaining this in fleet Master Data as Expiry data
Can this date be informed when it is expiring before one week
Any body who has done this
Please check we have to populate meassage or work flow From Master Data of fleet obje

Hi
I am closing this since no body is able to anser this
reagrds
chand

IMG Setting for Fleet Management - Set Reference Object for Vehicles

On other SAP 4.7 systems I have been able to access in the IMG "Set Reference Object Screen for Vehicles" under the "Settings for Fleet Management". I am currently working in a system that doesn't have that option in the IMG. What do I have to do to get this menu in the IMG?

Hi,
All the extra features provided by business functions in PLM are documented in note [1389108|https://service.sap.com/sap/support/notes/1389108]. See the pdf attachment in that note.
-Paul

Reg:T-CODE for open and close period for materials(new plant).

hi sap guru's
T-code for following process
can anybody send me , how to create calendar to new plant . and what is the T-code to be use for open and close period of materials for new plant.
thanks
sakthi..

Hi Sakthi,
I am assuming that you are asking about the factory calendars which are assigned while difing the plant.
Factory calendars are created through transaction "SCAL".
Opening and closing of MM periods can be done through transaction MMPV.This is based on the company code.Before using MMPV ,you can look the last opened period in the transaction MMRV.
Reward points if it helps.
Regards
Karan

Configuring KPRO for generic object services

Hello,
I have a requirement where I have to configure KPRO as the storage for generic object services. We are using the generic object services for materials and hence using the Business object BUS1001. Please let me know of how to do the same or if we have any documents for configuring the Generic object services and KPRO please provide me the same.
Regards
Nilanjan

Hi,
i reply to the question you posted in my thread:
I solved the request without using Kpro. Kpro ist just a more comfortable way in managing documents. But using ArchiveLink and GOS is all you need if you just want to upload documents and view them in a linked transaction. I would be able to give you a better help if you would give a short introdcution in what you plan to do in detail.
kind regards Matthew

Regarding the access key for an object

HI all
Please clarify me the doubt that an access key will be different for each and every object or one for all the objects.
regs
karna

Hi karna,
1. It will be different for all objects.
2. In fact, access key will be different
    for each object,
   and that too, for each different installation number
   as well as each basis version number
<b>3. In short, access key is dependent upon the combination of
1. The object R3TR FUGR SFES
2. Sap Release (eg. 640)
3. Installation Number</b>
4. It means that the access key for one standard program
   (in our server),
   will not work in another server bcos the installation number will be different.
regards,
amit m.

Some thoughts on the dearth of training materials for the new MCSE certifications

Mostly this is venting... while it would be nice to see some remediation, I have no such expectations.
Given that Windows Server 2012 was GA 15 months ago, I'm severely disappointed at the lack of published training guides targeted to the MCSA and MCSE certifications (most notably the 70-413 and 70-414), and specifically with respect to the objectives involving
System Center that are included in those examinations.
I used the Exam Ref by Steve Suehring, and frankly was quite disappointed, although I'm not sure whether to blame the book, or the question pool on the exam. What I did observe was that a significant percentage of the concepts discussed in the Exam Ref book,
and ostensibly in the objectives for the exam, were not actually touched at all by the exam. More significantly, I encountered concepts on the exam that were not even mentioned in the Exam Ref. Presumably the Training Guide (700 pages) will go into much more
detail (e.g. the exam I encountered seemed very heavy with respect to Active Directory Site design), but it won't be available until April (at the earliest).
Further, there's nothing available in the realm of preparation materials for the 70-414. The Exam Ref was supposed to be available in September 2013. (The O'Reilly site says March 2014, but the MS Exam Page is not yet updated.) Who knows when it
will really be available, and I don't even see a mention of an actual Training Guide for this exam.
Adding insult to injury, I bought into the special last spring to take the -417, -413, and -414 (which expires tomorrow), and have been unsuccessful at passing the -413 (due to the poor prep materials) and didn't even consider the -414 (due to the non-existent
prep materials). Frankly, I feel very ripped off -- (And if the actual questions on the -413 compared to the Exam Ref are any guide, I'm not particularly encouraged by the eventual availability of the -414 Exam Ref.)
I do see where there's still a discount package available (including 2nd shots) for the MCSE: Server Infrastructure ($255 for both exams plus 2nd shots), available until May 31, 2014-- and expire on December 31, 2014. I think I'll wait until May and see
if [a] the -413 Training Guide gets published and [b] what the "master plan" will be for training for the -414.
Btw.. it seems the prospects are no better for the MCSE: Private Cloud exams either.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

For post-production and audio work, having a quieter computer is one of the reasons I ordered a Mac Pro - quieter is good. And as my MDD dual 867Mhz is now as long in the tooth as I am, it couldn't come at a better time. I was really contemplating buying a quad G5 the past 6 months, but then heard the professional desktop would come out during the developer's conference, and I'm glad I waited. The price is absolutely - and insanely - great. Mine should be here on the 15th, and I'll be counting the hours. As for the risers, I'm willing to endure a few nanoseconds as a trade-off.
Regards,
Rube
G4 867x2 2Gb Mac OS X (10.4.7)

Value in fields " NextServiceDue " not appearing in fleet object

Hi,
I've created single cycle maint. plan for a fleet object, with order as a call object,order is scheduled and released manually,but i am not getting values in Filed "NextServiceDue "& " Order number
Under TAB vehicle technology,
I've gone through thread posted by SAP-PM,
please provide suggestions,
Thanks in advance,
Edited by: Pravin on Jun 8, 2009 10:26 AM

Dear Mr.Thyagarajan,
Scenerio is like this,
i've created a single cycle ,time based maintenance plan with 3 month cycle length,two fuel counters for measuring Fuel consumption and distance travelled is created,
i am getting average of the fuel consumed/100 km,but i am not getting the value for next service due ,
i've released the maint order as it was suggested in earlier post,
please suggest further,
Best Regards
Pravin
Edited by: Pravin on Jun 8, 2009 11:16 AM
Edited by: Pravin on Jun 8, 2009 11:17 AM

Can we lock down the system for BW object and not bex objects

Hello,
I have a question about object changeability. We want to lock down the BW production system but leave it open for adhoc query. Can we lock down the BW system only for few objects like Cubes, ODS, Infoobjects, Infosets, Multiproviders, and keep the system open for Bex objects like Query, varaibles and also for Infopackges and DTP's.
Which tcode can we use for this ?
Thanks,
Message was edited by:
Kiran Mehendale

hi, usaully production system will be non changeable for all objects.. but as far as SAP BW is concerned we can make certain objects changeable by setting as follows..
in production go to RSA1 - Transport Connection, select Object changeability button from tool bar, here you will find a list of objects which can be made changeable in a closed system.. just click on required objects and set it to Everything Changeable..
Reg,
Pradhiba
<REMOVED>

Installed Base / Fleet Objects - Plant Maintenance Module

Dear Experts,
Can anyone guide me what are fleet objects and Installed base in relation with Plant Maintenanace Module?
Please do throw some light on it.
Thanks
DM

Hello Deepak,
IBASE -> A collection of function modules used for VC or Hierarchcal structures.
Fleet -> Is used for example if you have to maintain many vehicals i. e. car park etc.
this is the easiest way to describe the use of both elements.
Hope that this helps
Regards,
Isabelle

AMC cost need to be captured in maintenance order for fleet equipments

Hi Guys,
Our requirement is for fleet equipments we need to capture all the cost like,Material,AMC.....etc in one order.
Normally we will create one mainteanance order for each equipment .When ever we post the consumption in Transaction:IFCU the cost of the fuel will be booked against the order.
But for AMC through maintenance plan we are creating the order.So, cost will be booked in this but not in the common order which we have created for fleet equipment.
How can i bring this AMC cost also in the maintenance order which we are creating for each fleet equipment?
Regards
Kumar

Hi Maheswaran,
Thxs for your inputs.But when i create the settlement profile with standing order as default object .This settlement profile will be assigned to the order type:PM03.This is will be default for this order type,but for preventive it should settle to the respective cost center.
How this can be handled?
Regards
Kumar

What are the certification books for Business objects Xi developer certifi?

Hi all,
i am planning to take up business objects certifications Can anyone tell me the prescribes books for the certification? i am able to find out the exam codes from persaon vue but no the Prescribed books can anyone pls guide me on this!!
Thanks
Pooja

Hi Pooja,
I am also looking for Business Objects certification materials. but didn't find any where.
If you find, please can you advice me on this.
very appreciated on your help.
Many Thanks
Sree

ECM - Variant Configuration - Disable for specific Object?

Once we use change number for a material and Configuration profile, the change number will be mandatory field. This also occurs for CU02 - Object Dependencies, CL02 - Classification, CU60 Variant Tables and CT04 Characteristics.
We know this is a crazy question to some that have strict controls, but we would like to remove the requirement for some materials & configuration that no longer require engineering change management. Has someone experience something similar or implemented a configuration change that would fulfill our requirements?
Reading through the process documents, I believe it is not possible. But I thought I would check with the global experts on this matter.
Best Regards and Thank you for your feedback,
Ed

Hi,
I would suggest you better go with the authorization control for the same. Beacuse by that way you will be alble to meet your requirement up to some extend but by this way as you are asking, there is crezy in true mean as you wrightly said.
Regards,
Shyamal

Difference bet ween Fleet Object and Production Resource Tools

Hi all,
Please give me the difference between Fleet Object and Production Resource Tools in Plant Maintenance
Thanks in Advance
Thanks,
shriraam

Dear,
Production Resources/Tools (PRT)
Unlike machines and fixed assets, production resources and tools (PRTs) are movable (not stationary) operating resources that are required to perform an activity and can be used repeatedly. For example, PRTs include documents, engineering drawings, jigs and fixtures, and measurement instruments.
Fleet Management
Here can map the vehicles as equipment master records and enter vehicle-specific additional data, which is displayed in the system on two additional tab pages. This means that you can now specify important fleet data such as the license plate number, load volume, consumption data, fuel card number, engine data, or fuel type and so on directly in the equipment master record.
You can also perform maintenance planning for a fleet object. You can make the date of the next scheduled service dependent on the distance
Please refer this link,
[Link|http://www.nd-solutions.com/pdfs/white_EAM/EAM_ConfiguringFleetMgt.pdf]
Regards,
R.Brahmankar

Activate Change pointers for TREX classification search for Business Objects

Hey all...
Does anyone out here has any idea on how to activate the change pointers for TREX classification search for business objects: - for me I am specifically doing it for Materials and Customers.
Okay, let me explain the issue: -
For TREX search, we need to schedule a background job for Delta Indexing. But Alas! Delta indexing does not capture the changes to Classification data of the business object.
For this we activated the change documents for the particular class in the customizing. But to my surprise, change documents and change pointers for TREX are entrirely different.
How do I know:
Change ID of CDHDR does not correspond to Change pointer in table COM_SE_CPOINTER. Now by activating the change documents I am getting entry in CDHDR and CDPOS but the mentioned change pointer table still does not get the entry.
I searched for BTEs and I got the below: -
Now to me the very obvious one was 4003, but it is not called while changing the classification data for materials. Ofcourse I activated the Product and the function module.
and now I am stuck!!
Any pointers for the Change pointers would be really appreciated??
Please share your knowledge even if you don't know the exact answer . I am new to TREX so possibly vague conversations could provide me a hint .
Thanks,
Best Regards,
Shreya

Hi Guys,
This issue was solved by implementing the BTE 4005 (OPEN_FI_PERFORM_00004005_E). This particular event is triggered in the update task for saving changes to business object. So In my function module (corresponding to BTE), I have explicitly called the method to write an entry in COM_SE_CPOINTER, because we just need the reference of business object for which classification data is changed.
Please refer the below code for more clarity.
BTE position: -
method called in FM to write change pointer.
Thanks anyways, for all the responses.
Cheers,
Shreya

Reg:- Auxiliary materials for Fleet objects

Similar Messages

Maybe you are looking for