Reg.Batch management configuration guide

Dear Experts
We want to maintain batch at material level. How to configure in ECC6.00. Pls help me giving the step by step configuration guide. and also AFS configuration guide.
Thanks
Rajakumar.K

Hi,
Follow the steps:
1.Field---VFDAT and table-MCHA should be created as a charecter in CT04 and assigned to a class in CL02N.
2.create MM01 and add the class to it in classification view.
3.In mm01 plt storage1 view give data for remainning shelf life and total shelf life and in purchasing view activate batch management.
4.OMJ5- activate SLED for your plant and mvt type 201.
5.opj2- set BD for your plant.
6.create sort sequence in cu70 and assign your charecteristic value to it.
7.create batch serch strategy in MBC1 for access sequence(plt/matrl/mvt typ) create a condition record.
8.Do a GR using 501 and enter SLED related details.(production date and exp date values)
Repeat the above step and enter diffrent values for SLED details.
So now two batches are created with SLED as the charecteristic.
9.Do a GI using 201 mvt tye in MB1A and enter * in batch field(system will determine the batch using the SLED value basedon the criteria(ascending or descending which was set in the sort rule.)
(or)
view this thread
Re: Batch Search
Reg,
Deepak

Similar Messages

Fund Management-Configuration guide step by step

< MODERATOR: Message locked. Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. >
Dear Sap gurus,
Please send Fund management configuration guide step by step.
Its very urgent.
Thanks in Advance,
Sree

Hi
Funds management :
Funds Management allows management to set budgets for revenues and expenses within your company as well as track these to the area of responsibility.
http://ot.bloomu.edu/Documents/SAP/Word%20Docs/New/SAPReportsJan2006.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIFM/FIFM.pdf
nagesh

Batch Management Configuration

Hi,
While configuring the Batch Management through Transaction u2013 OMCT.
First at Batch Level, selected the radio button as Material Level and Saved but Request is not created.
Second at Batch Status Management, selected radio button as Batch Status Management active and saved but the Request is not created.
We would like to know is Batch Management activation is Client specific?
Batch Level field is disabled and we are not able to see the settings.
Request is created only when the activated when Plant with Batch Status Management.
Need suggestions on this please.
Siddu

REfer some useful stuff
http://www.sap-img.com/quality/batch-management-batch-classfication-configuration.htm
Activation of Batch Status Management is not transported and needs to be set
up in each environment separately. As it is one time job in general and is a
sensitive functionality, it will not be transported. In my previous
implementation, the manual config is opened to mark this status.

Organizational Management configuration Guide.

Hi All,
Can any body please give me the configuration Stpes for Organization Management.
The tables included in the configuration.
I have gone through this site
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/dfba3692dc635ce10000009b38f839/frameset.htm
But i need whole configuration guide for OM.
Please help me.
Thanks,

Hi,
In OM you have to configure the following
IMGPersonnel management Organizational management  Basic settings  Maintain number ranges  set up number assignment for all plan versions
Maintain object type:
IMGPersonnel management  Organizational management  Basic settings  Data model enhancement  maintain object type
Maintain infotypes
IMGPersonnel management Organizational management  Basic settings  Data model enhancementu2014infotype maintenance  maintain infotypes
Relationaship maintenance:
IMGPersonnel management Organisational management  Basic settings  Data model enhancement  Relationship maintenance  maintain relationships
Maintain evaluation paths:
IMGPersonnel management Organisational management  Basic settings Maintain evaluation paths
Maintain personnel actions:
IMGPersonnel management Organisational management  Basic settings Maintain personnel actions
Activate inheritance of account assignment features
IMGPersonnel management Organisational management  Basic settings Activate inheritance of account assignment features
Setup integration with Personnel Administration
IMGPersonnel management Organisational management  Basic settings Integration  Setup integration with PA
Transfer data from Pa
IMGPersonnel management Organisational management  Basic settings integration  transfer data from PA
Perepare integration with Pa
MGPersonnel management Organisational management  Basic settings integration Prepare integration with PA
Transfer data to PA
IMGPersonnel management Organisational management  Basic settings integration Transfer data to PA
Check integration consistency
IMGPersonnel management Organisational management  Basic settings integration Check integration consistency
regards,
kalyani

Treasury Management Configuration Guide

Dear All,
Can anyone provide the Configuration Guide of Treasury & Risk Management Module ?
It will be really helpfull to me to understand this module complexity.
My mail Id is hitesh1486#gmail.com.

HI,
You can find the tutor/pdf's at
https://websmp208.sap-ag.de/solutionmanager - > Knowledge Exchange ->SAP Solution Manager ->SAP Solution Manager 7.0 - EHP1 ->Operations with SAP Solution Manager
(eg:- https://websmp208.sap-ag.de/~sapidb/011000358700000525352007E.sim)
also some guides from
https://websmp208.sap-ag.de/Solutionmanager -> Media Library
Regards,
Sam

Sap Collections Management Configuration Guide 6.0

Hi All
I have started to install SAP Collections Management from FSCM. I have seen references to a pdf document configuration guide version 6.0 but cannot seem to locate the document on SAP. Does anyone have this document or know where it is available?
Regards
Simon

Hi Simon,
Just simply check SMP > FSCM-COL > media library > 'other tab' as blow;
or I can share it if you share private email.
All the best
Ted.

To understand Batch Management configuration behavior

Hi all,
I'm attempting to activate and configure batch management and I encounter several system behavior within SPRO.
1. Under logistics General -> Batch Management -> Specify Batch Level and Activate Status Management, I get the following menu items: Batch level, Batch status management, Plants with batch status management. To start off with, I proceed to Batch level and select Batch unique at plant level and save. Next thing I know, the menu item Batch status management becomes inactive mode, hence unable to access this function to activate the batch management. When I return to menu item Batch level and change Batch unique at material level and save, the menu item for Batch status management returns to active mode.
Question: Is there an explanation for such behavior? If the menu item for batch status management becomes inactive mode each time I select the Batch unique at plant level, how do I activate Batch Management in SAP system?
2. I understand there's another configuration under logistics General -> Batch Management -> Batch Valuation -> Update Standard Characteristics is required to be performed. When I execute this configuration, the prompt says: "Do you want the standard features in batch management to be updated?". I clicked yes and there's a background job running for a while. Once the job finishes, the log shows a couple of errors or failures.
Question: Am I doing things right?
Thanks.
Edited by: Steven Khoo on May 27, 2011 4:54 AM

I am getting ready to active Batch status management on our client. I do not need to change our Batch Level, but in reading, my understanding is that the first thing you need to do after changing the batch level in SPRO is to run the Batch Level -> conversion routine, that is in the same menu. Once that is done, I'm guessing that the ability to activate the status management will again be available.
Once you active the batch status management, you need to run the Batch status management -> conversion routine for it to take effect.

Batch management configuration (beginner to this topic)

Hello all,
Please give me the details of Batch management spro and easy navigation from mm point of view. Please send it to me assuming that i am a beginner. But i know the concept of batch management. Please help.
Regards

pls follow the link:
http://help.sap.com/bp_bblibrary/500/HTML/Q02_BB_EN_DE.htm
regards,
indranil

Reg batch management

Dear all,
During uploading of material master templtes for one packing material batch management tick was not activated and stock was taken in without batch management, is there any procedure by which we can activate batch management now
Please advice
regards
venkat

Dear Venkat,
You must have loaded stocks with 561 movement ( initial entry of stock), best way is to reverse this entry (do 562) and then activate batch management.
Best Regards,
Shekhar

Treasury and risk Managament Configuration Guide

Hi Friends,
Can you please provide me the treasury and risk management config guide for the following :-
a. Foreign exchange forward cover
b. MTM Report Config
c. Financial Postings for the foward cover.
d. Swapping of forward cover.
Is treasury part of financial supply chain management, also let me know whether it is a SAP license product or part of normal standard product.
Please forward me the same to [email protected]
Thanks in advance.
Deepak

Hi deepak,
Check out these links
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDBFCM/SDBFCM.pdf
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIARCR/FIARCR.pdf
Assign points if useful
Regards
genie

XCM (extended configuration management) configuration guide

Hi All,
I have been working on PME (product modeling environment) and i require pricing information against the characteristics/variants created.For this i need to configure couple of parameters in XCM .I would be grateful if any of you guys can mail me XCM configuration guide to the following mail id <b>[email protected]</b>.
with regards,
Chaitanya

Hello Friends,
Can you help me to resolve my WEB CATALOG Image issue in the following weblog.
WEBCATALOG not working in CRM
Your help in this regard shell be highly appriciated.
Please also sent me XCM Configuration Guide for CRM E Commerce if it is available.
Jaswant

Batch Management Configuration Change

Dear Experts
We have 180 plants around the world. right now the batch settings is material level.
we need to set it into plant level, the same material used by other plants but procuring from different different soruce, Pls help me in detial how I can change this in to plant level.

At this present stage you can not change the batch settings from material level to plant level.
There is no option for this purpose in standard SAP

Spilt valuation with batch management?

Gurus,
I want to activate split valuation with batch management..
i know the configuration of doing split valuation..
but, i need help on batch management configuration...

hi,
Why do you want both at the same time??
Either split val. or batch management independently can solve your issues...
Please let me know the reason...
For split valuation :
To select split valuation ('OMWC'), proceed as follows:
1. Determine the valuation categories and valuation types that are allowed for all valuation areas:
global valuation categories via menu "Goto --> Global Categories"
global valuation types via menu "Goto --> Global Types"
2. Allocate the valuation types to the valuation categories.
a) Select "Goto --> Global Categories".
b) Position the cursor on a valuation category and select
"Goto --> Global Categories --> Assignments --> 'Types->Category'".
c) Activate the valuation types you want.
3. Determine the local valuation categories for each valuation area.
a) Select "Goto --> Local definitions".
b) Position the cursor on a valuation area and select
"Goto --> Local Definitions --> Allocate Categoires->Org.units (button Cats->(OU)".
You obtain a list of the global valuation categories.
c) Activate the categories to be used in this valuation area.
The system creates the local valuation types based on the allocations under point 2.
Only now can you create a master record with split valuation.
Specifying Split Valuation by creating Material Subject to Split Valuation
1. Create a material master record, selecting the Accounting View 1.
2. Enter your data as required on the Accounting data screen, specifying a valuation category.
(If you can't find the valuation category field, it might be hidden, use OMSR to define the Field Groups.
Look for the field MBEW-BWTTY for Valuation category).
3. Be sure that the price control indicator is V for moving average price and enter a moving average price.
4. In the case of split valuation, you can create only one valuation header record with price control V because the
individual stock values are cumulated, and this total value is written to the valuation header record. This is where the
individual stocks of a material are managed cumulatively. To do this, fill in the Valuation category field on the accounting
screen when you create the material master record and leave the Valuation type field blank.
5. Save your data and the system creates the valuation header record.
6. The initial screen appears.
7. Extend the material by creating new material master records from the Accounting view 1. For the first material, specify a
valuation type in the Organizational Levels dialog box and enter the respective accounting data on the data screen.
Proceed likewise for the other materials, distinguishing between them by valuation type. To do this, call up the material in
creation mode again. Due to the fact that a valuation header record exists, the system requires you to enter a valuation
type for the valuation category.
8. Repeat step seven for every valuation type planned.
You want to valuate the stock of material XYZ that you obtain from manufacturer A in Los Angeles at a different price than the stock you obtain from manufacturer B in Detroit. In this case, the valuation category is H for origin. Your valuation types can be LOS ANGELES and DETROIT.
If a material is subject to split valuation, every quantity (sub-stock) of this material must be assigned to a valuation type (for example, country of origin).
For every valuation type, there are two types of data in the system, as follows:
Valuation data (for example, valuation price, total stock quantity, total stock value), which is defined for every valuation type at valuation-area level and applies to all dependent storage locations.
Stock data, which, like batch data, is managed separately for each storage location. If a material that is subject to split valuation is also subject to management in batches, its stock data is not managed by valuation type, but rather by batch. Every batch is assigned to a valuation type.
The stock quantity, stock value, and valuation price for all valuation types are managed cumulatively at valuation-area level
Regards
Priyanka.P

I want to create batch in IS-RETAIL. with out using batch management

dear all
i have to create a batch with using batch management in IS-RETAIL . when i am creating the MM41 that time i have to give the tick mark for batch management that has to come in migo screen with movement type 105. their i can select the batch's whcih i can use . how can i do it. batch management not required, but have to create batch for my material .
thank you
Ark

dear experts
yester day i asked the same question. i created the article and also ticked in batch management tab. but i did't configure any batch management in my screen. when i am going to use the migo screen with movement type 105 i have to select the storage locations with different batch number for that article . how can i maintain that? can you please give me the solution for this . i dont need any batch management configuration ? i need simple solution but should be use full for my requirement?.
thank you
RK

Configuration steps for Quality and Batch Management.

Hi Friends,
We are implementing QM along with Batch Management for testing the material like purity,pathology tests.
I am new to Quality and Batch Management.
Could any one guide me, how to configure material master for QM and Batch to test the material?.
Thanks

1) Maintain Material with Classification and Quality Management view
2) Tick the Check box Quality key Active in QM View->QM view->Inspection Set up and activate the inspection type for which the inspection lot.(e.g insp. type 01 - GR against PO)
3) Create Quality Info Record(QI01)
4) In PO the stock automatically goes to Quality stock.
5) Check MMBE stock
6) Do Result Recording and Usage Decision(QA32)
7) Check stock (MMBE).
There are few steps where the PP/QM Consultant need to help you in QI01,QA32 and in Creating characteristics and class according to Requirement(purity...etc).
Regards,
eswarmanu...
Edited by: eswarmanu on Oct 21, 2008 7:09 PM

Reg.Batch management configuration guide

Similar Messages

Maybe you are looking for