Reg BOM explosion

Hi
In my project..i hv done bom explode at my sales order Where TAQ & TAE is determining But my TAQ(header item in relevant of picking and goods movement,But TAE(Sub item) is not relevant for picking & goods movement.
Problem is that if User Is changing the Sub item then system doesnt show any change for header item.But if header item is changing the sub item changing accordingly at sales order.
Also if i m changing the Header item in delivery document that has no effect on sub item which is a problem in business process.
So my client wants not to explode bom at sales order level and want to explode BOM at delivery level.But is quantity is changing at delivery it should show the message.
Plz guide where i can restrict them & what are the Configuration.
Regards
SAHOO

Similar Messages

Multiple BOM Explosion in MD04 for the same material

Dear PP Gurus,
Scenario is make to order. BOM is created for production usage (1) & sales usage (5) for a Header material. Routing also exists for the same.
Once i run MRP at plant level or material level after creating sales order , BOM is expoded multiple times i.e. 3- 4 times but proposals ( planned orders) are created as per requirements.But BOM explosion when we click on show overview tree is happening multiple times which should not happen.
Our client business is not getting hampered by this but still he doesnt want explosion multiple times and to be precise it should not happen.
Can anyone pls. throw some light on this .
Thanks in advance . Answers will be rewarded for sure.
regards,
Nagraj Vasmate

Hello Nagraj,
In MD04, On overview tree, it explodes all possible BOM for the header material.
System will explode all valid BOM's with usage 5 and 1 for that specific material.
Reg
Samson

Retrieving deleted BOM explosion Number

HI Folks,
I have deleted one bom explosion number.Now i wan to retrieve it back as system is not allowing to create same Bom explosion number and showing below error
"BOM explosion number s4370030 has been flagged for deletion".Appreciate early replies.
Regards,
SBR

Hi Sbr,
1. I dont think that it is possible to retrive the BOM explosion number that has been deleted.
2. It is alwyas recommended to change the status as inactive if you dont want to use it.
Reg
Dsk

BOM Explosion for Multiple Process Orders

Hi,
I hope someone can assist me with the following: Is there a report I can run or transaction I can do to have BOM explosion for multiple Process Orders? I would like to input process orders for a week and see the BOM details per PO.
Thanks

Dear Sukendar,
1.For this requirement you have to go for a Z report and you can give the Functional Spec's to prepare
this report to your ABAP consultant.Prepare the input format,logic of the program and the output format.
In the logic part you can make use of this Functional Modules's CSAP_MAT_BOM_READ or
CSEP_MAT_BOM_READ or CS_BOM_EXPLOSION or CS_BOM_EXPL_MAT_V2 .
2.Using CEWB helps you to identify all the material that's having the BOM,but here the report does not
shows you the level by level by BOM for a FERT.
Check and revert back.
Regards
Mangalraj.S

Reg : BOM and production order

Hi all,
I have created two production orders for the same material but with diffrent BOM explosion date. now can any one please let me know how will i find which version of alternate BOM of the material is used in the production order.
In the production order header table ( AFKO) i am getting only the alternate BOM number, i am ubable to find which version of alternate BOM is used for Production order.
Thanks .
VIJAY

the relation is as below
AFKO-STLNR = STAS-STLNR
AFKO-STLTY = STAS-STLTY
AFKO-STLAL= STAS-STLAL
FROM HERE TAKE ALL
STAS-STLKN AND STAS-STLTY
PASS IT TO STPO
STPO-STLNR = STAS-STLNR
SPO-STLTY = STAS-STLTY
STAS-STLKN-= STPO-STKLN
THIS WILL GIVE YOU ALL THE BOM ITEMS USED IN THAT PROD ORDER.
IS IT OKAY?

BOM Explosion needed on PO and/or Delivery for Stock Transfer PO Process

Good afternoon,
I have been researching the SDN and web for a solution to my problem to no avail so far.
The business problem I need to solve is the requirement for our STPO process to explode certain BOM's that are transfered from one company/plant to another company/plant in order to record batch/serial # component information by the delivering plant on the delivery and verification of the batch/serial # in the receiving plant during MIGO processing of the delivery. This is needed by our Service Mgmt department in order to track servicable items within the Finished Good (medical devices industry).
It appears on the SDN that a BOM can not be exploded on a non-Subcontracting PO (which would be ideal for us), but barring this problem, we are trying to have the BOM explode in the Delivery created from the STPO via the VL10B transaction.
The STPO generates a Delivery doc with type NLCC and item category NLC. I have maintained the material master for the BOM material to have an Item Category Group of ERLA, and I have modified Item Category Determination in configuration in Logistics Execution for deliveries to include ERLA, usage V, and NLC as default item category. But, the deliveries generated from the STPO still do not explode, like what normally happens if the delilvery of the BOM was created from a standard Order.
The components for the BOM need to be displayed on the Delivery (if not the STPO), so the cleark can record the Batch/Serial #'s for each component. Then when the receiving plant posts the Goods Receipt for the delivery a user exit we have (based on movement type and material document code) builds a Service Mgmt table that is then processed to De-install the BOM and components from the former plant and install the BOM and components at the receiving plant (and then subsequently at the ultimate customer's location when a normal sale is made), generating a new Functional Location.
Has anyone here had to do anything like this before? Would any of you have any ideas on how this BOM explosion might work on the PO or Delivery?
Thanks in advance.
Scott.

No responses to this question.
Subject dropped.

BOM Explosion needed on Delivery for Intercompany Stock Transfer Order

Good afternoon,
I have been researching the SDN and web for a solution to my problem to no avail so far.
The business problem I need to solve is the requirement for our STPO process to explode certain BOM's that are transfered from one company/plant to another company/plant in order to record batch/serial # component information by the delivering plant on the delivery and verification of the batch/serial # in the receiving plant during MIGO processing of the delivery. This is needed by our Service Mgmt department in order to track servicable items within the Finished Good (medical devices industry).
It appears on the SDN that a BOM can not be exploded on a non-Subcontracting PO (which would be ideal for us), but barring this problem, we are trying to have the BOM explode in the Delivery created from the STPO via the VL10B transaction.
The STPO generates a Delivery doc with type NLCC and item category NLC. I have maintained the material master for the BOM material to have an Item Category Group of ERLA, and I have modified Item Category Determination in configuration in Logistics Execution for deliveries to include ERLA, usage V, and NLC as default item category. But, the deliveries generated from the STPO still do not explode, like what normally happens if the delilvery of the BOM was created from a standard Order.
The components for the BOM need to be displayed on the Delivery (if not the STPO), so the cleark can record the Batch/Serial #'s for each component. Then when the receiving plant posts the Goods Receipt for the delivery a user exit we have (based on movement type and material document code) builds a Service Mgmt table that is then processed to De-install the BOM and components from the former plant and install the BOM and components at the receiving plant (and then subsequently at the ultimate customer's location when a normal sale is made), generating a new Functional Location.
Has anyone here had to do anything like this before? Would any of you have any ideas on how this BOM explosion might work on the PO or Delivery?
Thanks in advance.
Scott.

No responses to this question.
Subject dropped.

BOM explosion in subcontracting PR

Hi...
I have one issue of BOM explosion in subcontracting PR.
I have created BOM, routing & PV. Production version maintained in info record.
While creating manaul subcontracting PR , BOM is not exploded giving error message as "Not possible to determine any components".
I have checked validity of BOM, PV found ok.
Also Proc. type X & Spl. proc type 30 maintained.
Any suggestion to the problem appreciated
Regards
Tushar

Dear Tushar,
Check this link
[Sub contracting PO - BOM components are not seen;
Regards
Madhu

How to restrict BOM explosion in Quotation and Sales Order

Dear all,
How can we restrict BOM main item explosion in Sales Order.
this BOM main item is having special order items which have to generate purchase requisition (item category - BANC),
with out exploding bom main item, can we generate a purchase requisition for BOM subitems, can any body explain me that how can we do that.
your suggestions will be highly appreciated.
thank you
Raghu Ram

Hi Raghu Ram,
The BOM explosion is controlled by item category.
In the item category configuration screen, under "Bills of Material/ Configuration", you can see "Structure Scope" field.
Select the one which is applicable to your case:-
"blank" - Do not explode material structure
A - Explode single-level BOM
B - Explode multi-level BOM
C - Configuration, no BOM explosion
D - Configuration, poss. with BOM explosion
E - Structure from Customer_Function (product selection)
Hope this helps
Regards,
Nicole

BOM Explosion Number in Sales Order

Hi Experts,
For a make-to-order case, I would like to assign a predefined BOM explosion number with fixed key date to a sales order item. Instead of manually assigning the BOM explosion number to the sales order item, is there any way to let the system automatically assign the BOM explosion number?
As I read from SAP Library under the BOM Explosion Number (Fixed Key Date), it states "The system can automatically specify the BOM explosion number when entering planned independent requirements or customer independent requirements or when entering the sales order." So is there any configuration to be done in advance to enable the BOM explosion number to be automatically assigned to sales order item?
Thanks,
SW

I tried also setting up the material and its BOM determination by specifying only 1 BOM out of multiple BOMs. Still,
1. When I add the said material into sales order line and save the sales order, the BOM explosion number value never appear automatically in the sales order line.
2. When I run the planning on the sales order through MD50, the planned results do not have the BOM explosion number attached.
I think your advice is more applicable to selection of a BOM from multiple BOMs instead of determining the fixed key date based on appropriate BOM explosion number, correct me if I am wrong.
Regards

BOM explosion in sales order

Hi Experts,
I have met a problem in BOM explosion in sales order.
I have maintained the BOM with usage 5 and the conversion between header material and component of the BOM. But in the sales order entry, no matter how many qty I entered for the header material, after the BOM explosion, the qty of component is 1.
Can anyone help?
Regards,
Emily

Hi,
Go to CS02 and select ur bom and go to components give 1 that means 1;1
hope u get it
regards,
sadanandam kasarla

Bom explosion in sales order mrp(MD50)

Hi Experts,
In sales order MRP i.e. MD50 Getting the planned orders for header material(Finished goods) generated but for raw materials (BOM items) Purchase requisitions are not getting generated.
Details:
Header material A and raw materials B and C.
In material B in MRP 4 coll/ind indicator is 2 And same indicator for C is blank.
Now when we are running the MRP sales order based it will generate the purchase requisition for C only but not for B.
In OPPQ we have done the setting for sales order BOM explosion.
Can anyone please throw some light what is the setting missing in customization or in front end?
Thanks in advance.
Regards
Vilas

Dear,
If you select individual requirement then system will not consider available stock and generate Proposals for every single requirments. Check in MRP4 view Individual / Collective .
Also you will find PR and Plan order with account assignment of Sales order (in case of MD50).
- If you select collective requirement then system will not generate planing proposals through MD50.In that case you have to go for individual MRP (MD02 / MD03)
Please try and come back.
Regards,
R.Brahmankar

BOM explosion in Sales order with material variants

Dear all,
we would like to work with Variant Matching in the Sales Order. Additionaly we would like to explode the BOM....according to the SAP help this is not possible....
http://help.sap.com/erp2005_ehp_06/helpdata/en/bd/05a7d69d3211d190380000e8a49aad/frameset.htm
Does anybody of you has any ideas how and where to make this happen?
Thanks for your help and kind regards
Jan

Hi,
I have gonethrough the SAP link referred by you but never come across with any problem in type matching during Sales order even if the BOM explosion is set for Multilevel in Configuration Profile provided the other pre requisite set up was perfect.
Regards
Brahmaji D

MRP RUN- KIT BOM explosion not working

We setup one layer BOM’s for our maintenance KITs as parent material and components as child material. For example KIT is TS10000-K1 and components are TS10001, TS10002 etc setup as next layer with in the BOM. Both KITS and components are defined as material types ERSA (Spare parts). These one layers BOMs are setup as production BOMs and expected to create purchase requisitions for KITS and components by exploding BOMs during MRP runs. We use purchase requisitions and convert them into POs to procure both KITS and components. We DO NOT USE Panned orders and Production orders.
The safety stocks / reorder point are considered as demand for KITS and components as we do not have any external demand for KITS and components.
MRP run is creating purchase requisitions automatically for both KITS and components as per safety stocks and reorder point defined in MRP Views of Material Master. This is working as expected.
The issue is: KIT BOM’s are not exploding to generate purchase requisitions for the dependent components of KIT BOM. Please suggest the way to resolve this issue.
Split valuation: Also we plan to use split valued KITS with both new and refurbished. So we need BOM explosion for split valued KITS
also (after the 1st issue is resolved).
I verified the following items to make sure the required configuration and data setup is defined correctly.
1) Planning file activated Plant - OMDU
2) Executed MRP run with Total Planning - MDBT and MD02 (single item, multiple levels)
3) BOM explosion for MRP activated- OS23
4) MRP type in MRP1 view- PD and VB (I tried both separately but BOM is not exploding).
5) Procurement type “F” (MRP 2 view) and lot size “EX”
6) Planning strategy in MRP 3 view (tested w/o planning strategy and with strategies 10 and 40. But BOM is not exploded)
7) BOM status and usage (status is active and usage is for production-CS02 and OS20)
8) BOM Validity date (Valid)
9) BOM structure in CS12 (BOM is exploding in CS11)
10) Availability check
11) Selection of BON ID to have BOM usage indicator assign (OS31).
12) No alternate BOMs or production versions or work scheduling view are used.
Please review the above 2 issues and suggest any workable solution. Thanks in advance!
NOTE: I extensively used MRP with multi-level BOM explosion in my earlier projects without any issue. However the above issue is a bit strange why one layer BOM is not exploded in this case.
Regards
Srini

Hi
Thanks for your response. I reviewed all SAP notes and none of them are applicable to my scenario.
1808396 - BOM changes not considered by MRP: I have not changed BOMs.
1781324 - MD11: Valid BOM alternative is not found. We do not have alternative BOMs.
1791009 - No BOM explosion after changing production version: We am not using production versions.
Our Material KITS are PM spare assemblies set up as BOMs and consists of individual spare parts as components. We are creating purchase requisitions and not planned orders. We are not using PP functionality/Production orders.
MRP is generating purchase requisitions for KITS and components as per ROP and safety stocks. In other words it is working as expected. The issue is BOMs which are parent assemblies are not exploding to the next lower level components.
Please note that I am not getting any error messages when MRP is executed.
Regards
Srini.

Report for Cost of Multiple products with Multilevel BOM explosion

Hi,
Our client has a requirement of a report showing standard cost estimate of multiple FG products, with multi-level BOM explosion.
In short, the requirement is to get a CK13N report for multiple products.
Has anyone come across such requirement? The requirements seems to be very normal.
But, I have not seen any standard report for the same. If there is any, please suggest.
or suggest a better solution for the same.
Thanks in advance. Pts guaranteed.

Hi,
I totally agree with you that this is a totally vague requirement.
However, let me share the reason for such client requirement.
We have a customer, for which we produce certain parts for select models. Now, the arrangement with customer for pricing is based on the raw material and other production cost for all such parts. Based on the fluctuations in cost, the pricing would be finalised.. on a monthly or quarterly basis.
For this purpose, the customer requires to know the raw materials used in each of the part.
Individually it could have been managed. But the price change in terms of % is decided at global level and not for each part.
Please suggest

Reg BOM explosion

Similar Messages

Maybe you are looking for