Reg:BUISINESS SYSTEM

Hi Experts,
is it possible to create the newTS & business system for the r/3client(system)it has already TS & business system?
please suggest to me

Hi,
It is not possible to create a different TS & BS for the same client.
1. In the Systems Catalog we define each Technical System in the landscape.The Technical System correlates the software to the physical host on which it is installed. The exact settings for each System depend on the system type.
2. Technical systems are the basis for defining Business Systems. The association between the Technical system and the Business System is dependent on the TS type; for instance, in a system based on SAP Web AS (ABAP), each client in the system is a separate Business System (this corresponds to the notion of a client as a Logical System in ALE
configuration).
Thanks,

Similar Messages

  • Reg. System status of Plant maintainance work order.

    Hi All,
    I have a req. where we need to fetch all the PM orders on some conditions and calculate planned and actual costs.
    I want to know what is the system status when costs are supposed to exist.
    thanks.

    Hi,
    As you are aware there are two types of costs.
    1 planned Cost this will get updated irrespective of your order system status. As soon as you maintain Material or Opertion with activity type.
    Even if you select exterenal cantrol key in operation, what ever you give the cost while filling the data for PR generation will pick up for planned cost. Simillarly for material PR too.
    2. Actual cost  this wil get update when you post the material or confirm the operations. You can post material provided your order system status is REL released That means you can say actual cost posting will happen provided order is released.
    Hope it's help ful.
    Reg,
    N.Nagaraju

  • Reg Logical System Name

    Hi,
    We have ECC 6.0 PROD and ECC 6.0 QAS System.
    WE have different logical system names for both the systems
    But when we refreshed the PROD to QAS , we have to run the BDLS transcation to change the logical System name(since we are having different logical System name)
    But BDLs is taking more than 40 hours.
    Please let me know  , whether logical system name can be the same throughtout the landscape or not
    In other words , is there any side effects if i have same  logical system name for QAS and PROD

    I've been researching the same issue.  I found the following
    "Is it necessary to change the logical system names?
    Because of the two reasons mentioned above (long runtime of transaction BDLS and possible inconsistencies), it may be desirable, to avoid the renaming of logical systems during system copy.
    Whether logical systems names need to be changed at all after a system copy depends on the type of the target system: "
    This is from SAP System Landscape Copy for SAP Net Weaver and my SAP Solutions
    Best Practice for Solution Management
    I found it searching for sap bdls alternative
    Hope this helps.  I'm continuing my search.

  • Reg: Business system

    Hi All,
    Abap program will write the IDOC information into a flat file and this flat file will be put into the same SAP R/3 App server.
    XI Interface has to pick this flat file which is located in the R/3 App Server and send to the File server in the same format (i mean to say same file has to be keep into the app server) ..No mapping nothing just our XI interface has to work like a FTP which will pick the file from R/3 App server and put the same file in some other File server.
    To Achieve this..
    <b>NOTE: Here in the landscape we are using J2se Plain Adpater.</b>
    just now i did a simple scenario to achieve this...
    i have taken two business services one for sender and the other is for receiver.
    message interface and interface namespace for both i gave fake name which is same for both.
    then i have created two communication Channels (one is for sender an the other is receiver) with XI adapter  as i already said we are using J2se plain adpater engine...
    in receiver determination i have configured receiver determination ,sender agreement,receiver agreement (in all these i have given some fake name for both sender interface,receiver interface and namespace).
    now in j2se plain adapter engine i have configured sender and receiver file adapter..
    but i need a code for sender j2se file adapter to look into sap/r3 server's directory ..
    if its XI file adapter we choose FTP as a file protocol and will give r/3 login details.
    but in j2se file adapter how will u write the code for FTP file protocol
    Please help me ...
    Thanks in advance.
    Regards,
    Reehan

    Hi Reehan,
    Why don't you use the ABAP program to send the information directly to XI via proxy, rather than have it write to a file which XI will pick up?
    Currently, in your scenario, you are just using XI as an File Transfer tool. This is not recommended, not least because it is a waste of system resources. Also XI license costs are based on message volumes, so you will end up with more costs for no added value.
    Alternatively, use the SAPFTP functionality in the ABAP stack to directly FTP the file out to the target system, eliminating XI altogether!
    For more details refer to the following blog:
    /people/thomas.jung3/blog/2004/11/15/performing-ftp-commands-from-abap
    Cheers
    Manish

  • Reg Technical System & Business System Creation

    Hi,
       Am trying to create a Technical System in my SLD for my ECC6.0 installation.The System got created and my problem is when i create my Business system out of it.When i try to create a Business System am not able to do so and i get an error as below:
    "No products are defined for the selected technical system
    Define the installed products in theTechnical System View "
    also when i try to add products am not able to do so.what could be the problem.I need solution to this very urgentlg.
    Am on SAP Netweaver SP09 stack.
    Can someone help me out.I want to create a Business system to use it in my XI Integration.
    Regards,
    Karthik

    Karthik,
    Is your SLD on Stand alone java or is it on dual stack? If it is on a dual stack system, login to your ECC system and register your ECC system with the SLD using RZ70.
    -RK

  • Reg. different system

    Hi
    I heard that there are 3 systems. Production, Testing and Implementation. Who will be working on what system. How do we know that we are working on which system. Is everything done on Testing system first.
    Please explain.
    And also how to transfer from one to other.
    Thanks
    regards
    Sridhar
    [email protected]

    Hi Sridhar,
    There will be 3 servers in BW namely Development, Quality and Production. First of all the initial development work is done in Dev and it is sent to Qual wherein it undergoes the testing if anything is wrong then it will be sent back to Dev and after the corrections again to Qual. If you get a green signal fro your work then it is sent to Prod during Go-Live.
    Coming to how the data is tranfered from one server to another, it is done through Transpotations with the help of BASIS guys.
    Hope I am clear to you,
    Bobs.

  • Reg: HU2 System

    Hi All,
    Can i use HU2 system as a sand box to learn ABAP and functional like fico...? I think the system is for navigation, testing....etc
    Regards,
    Venu V

    By Default OBI presentation server looks for System Delivery Profile for Users while using iBots. When SA System Subject Area is setup ...BI picks the profile from SA System. Incase you just want to have Interactive Dashboard checked...make sure you have atleast one delivery profile setup in My Accounts for that user else it will throw this error. You can give any value there.
    This shud solve

  • Reg: On System outage Interface doesnot execute

    hi Experts ,
    your suggestions are important here.
    As per the requirement we have built an interface to send SAP-R/3 data to third party system. Now the interface executes as a daily Job (Daily execution) .
    We are just pondering on the fact that if any of the day there is a system outage then do we need  to handle that situation while developing the interface at the technical level...
    Or is it like the day there is a system outage there is no need to send across the master data (Cost Centers and Project Codesi.e WBS Elements) to third party system. The interface will get executed for the next possible day.
    Which amongst the above approach will be suggestible ?
    Any suggestions will be beneficial in our process of understanding.
    thanks
    Kylietisha

    Let me summarize your question
    You are sending Master data on daily basis to third party system. What happens to changes that incur to master data if system is down?
    If that is your question, then create parameter in TVARVC table with parameter say MASTER_LAST_EXEC_DATE and update the value with last execution timestamp. When the program is process read the timestamp from the parameter and pick the changes from that timestamp onwards.

  • REG:REGRESSION & SYSTEM INTEGRITY TEST

    Hi experts,
    i have one question i dont know it may be basic question. i am new to xi/pi can you please tell me
    how we test & what the purpose of the REGRESSION TEST,SYSTEM INTEGRITY TEST,PERFORMANCE TEST
    what are the differences between these three test in pi
    thanks in advance
    koti

    Hi
    From the point of view of  PI landscape and testing methodologies :
    Performance testing
    1.To Test the systems load tolerance .Its purely physical testing and no application logic is tested in this.One case may be to check the system performance like how much time is taken if multiple users assess the system or say create  orders using the interface.
    2.There may be several ways u can design an interface to make the business logic to work.(say with BPM or without BPM).So  in PT you can evaluate system performance and decide on which approach is best suited.
    3. It might be useful to fix any hardware sizing issues also.
    4.Usually done  in pr- prod system  say after a system refresh or migration etc.
    System Integration Testing--
    1. To test end to end business logic and functionality when all the systems in the data flow are connected and individual unit test is already done (say ECC,PI and third party ).
    2. helps is checking the connectivity, execution of functionality.Basically it can be a functionality test.
    3.Done after Dev and before User acceptance testing.
    Regression testing----
    1. Its done when there are changes made to functionality/data , before and after test scripts are prepared and executed.
    2.its helps in checking if the changes made will effect any exisiting functionality ,basically before and after the change the existing functionality should not effect but the required changes should reflect.
    3.Done after a  fix in code and before moving it to prod.
    You can refer this like alsohttp://wiki.sdn.sap.com/wiki/display/ERPLO/TypesofTestings
    Best Regards,
    Srinivas

  • Can any 1 help reg Post system refersh activity

    Hi
    can any one help me regarding post system refersh activity?
    Regards,
    Siva

    Hi,
             license the machine,run se06,check the stms config,reasign logical systems,number ranges of the transport requests,recreate fax and mailing list,check printers,ditribution models,RFC,mailing list...
    Regards
    Umesh

  • Reg : APO system administration

    Hi all,
    I am looking out for apo system administration books .I am basis guy,So can anybody share with me the docs and what all should a basis guy should know about apo systems.

    Hi Ambarish annapureddy
    As a basis task, liveCache management is one of the required task. (sometime CIF management also).
    For SCM system management, SAP provides various documents so called "Best Practice document".
    So I recommend you to check the documents that are available from following link.
    URL : http://service.sap.com/solutionmanagerbp
    (also this information is described in SAP Note 572003).
    <I think following documents might be interesting for basis team>
    1. Performance Monitoring  for mySAP SCM 4.1 / 5.0
    2. System Monitoring for SAP APO (3.x) / mySAP SCM (4.x/5.0)
    3. Manage APO Core Interface in SAP APO (3.x) / mySAP SCM (4.x/ 5.0)
    4. Internal and External Consistency for SAP APO 3.x and SAP SCM 4.x / 5.0
    5. Monitoring and Administration for SCM / APO
    6. Checklist for Recovery of SAP APO liveCache >= 7.4
    If you application colleague do not know this document, I also recommend your application colleague to check the one of the related documents like following.
    -Manage Demand Planning in SAP APO (3.x) / SAP SCM (4.x/5.x)
    -Manage the Transportation Management Solution in SAP APO (3.x) / SAP SCM (4.x/5.x)
    -Manage Global ATP in SAP APO (3.x) / SAP SCM (4.x / 5.0/5.1)
    -Manage Production Planning in SAP APO (3.x) / mySAP SCM (4.x/5.0)
    -Manage Supply Network Planning & CTM in SAP APO (3.x) / SAP SCM (4.x/5.x)
    -Manage APO Core Interface in SAP APO (3.x) / mySAP SCM (4.x/ 5.0)
    -Internal and External Consistency for SAP APO 3.x and SAP SCM 4.x / 5.0
    best regards
    Keiji Mishima

  • Reg Project system

    Hello Everybody
    This is related to PS cash flow. Commitment activated. Created project. Created PO with proper commitment item selected automatically. The account assignment in purchase order is P. This means after GR (Goods receipt) the cost is charged to project.
    As soon as the purchase order is made line item appears in report CJIA as credit in column "val type" 51 - Purchase order. Val type 51 stands for purchase order. After goods receipt and invoice receipt is made the report CJIA changes.
    The record against val type 51 becomes zero and new record with same amount appears against  val type 54-invoice . Val type 54 stands for invoice. Payment is made against the invoice. This does not appear in the report. Record with val type 57 - payment should have appeared in the repot CJIA. This record is missing.
    Please suggest me
    Thanks and Regards
    Sudheer

    Hi Bhima,
    Refer this link:
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/f51534155d11d4b2d10050dadfb103/frameset.htm
    Bye
    Dinesh
    (Do not forget to assign points!!)

  • Reg:source system( foxpro data)

    hi bw experts
    i want to extract data from foxpro.tell me the procesure how to do that.
    suresh p

    Hi,
    check these  whether thses links helpful to you!
    bapi staging links!
    https://websmp202.sap-ag.de/~sapidb/011000358700010881972001
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/350ac790-0201-0010-b887-fcb9ad1d407f
    VB write to BW tables / ODS ?
    Ravi

  • Getting selected values from selectManyChoice component inside valueChangeListener

    Hwo do I get the selected values from the selectManyChoice component inside the valueChangeListener.
    The API docs for valueChangeEvent.getNewValue() show the return type as java.lang.object. This is good for single value what does it return in case of multiple values.
    My drop down has string values so I am expecting a set of string values.

    JDev - 11.1.2.3
    public void onRegionSelect(ValueChangeEvent event) {
    event.getComponent().processUpdates(FacesContext.getCurrentInstance());
    if (!PhaseId.INVOKE_APPLICATION.equals(event.getPhaseId())) {
    event.setPhaseId(PhaseId.INVOKE_APPLICATION);
    event.queue();
    } else {
    List<Object> values = Arrays.asList(event.getNewValue());
    System.out.println("Value changed ==>> "+values.size());
    DCBindingContainer dc =
    (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
    DCIteratorBinding iter = dc.findIteratorBinding("RegVO1Iterator");
    ViewObject vo = iter.getViewObject();
    StringBuffer regions = new StringBuffer();
    for(Object index : values){
    String iIndex = (String)index;
    Row row  = vo.getRowAtRangeIndex(Integer.parseInt(iIndex));
    regions.append((String)row.getAttribute("Region")+",");
    String reg = regions.toString();
    if(reg.endsWith(","))
    reg = reg.substring(0,reg.lastIndexOf(","));
    System.out.println(reg);

  • IR objects(Msg interface ,Interface Mapping) not displaying in ID side..!

    Hi All,
    PI 7.0 installed in my project.
    I started testing the scenario.
    created all the objects in IR,
    but in configuration side, when i try to assign the Message interfaces which i created in IR for Sender agreement, Receiver agreement,interface determination and rx determination.
    It is not showing any Message interfaces in the popup window.I tried like this by creating 3 scenarios. Still the same problem persists.
    Anyone has idea whats going wrong?
    Any installation problem? Why my IR objects are not showing in ID side?
    Do you think any cache problem?But when i check in Cache notification all the buttons are in green.But when i check in problems tab, its showing the below error...
    // com.sap.aii.ib.core.roa.RoaCoreException: Attempt to access application REPOSITORY using Http Method Invocation (HMI) failed. Detailed information: Invoking ROA method "ReadObjects" via HMI ... FAILED due to following exception: Message: Unexpected error on server for system REPOSITORY with application REPOSITORY. Detailed information: Reading GDI ... FAILED. Source is not well formed. SAXParseException at line 3, column 1041. Details:
    Message: XMLParser: Entity 'gt' undefined (:main:, row:3, col:1041) //
    I showed this to my basis team, but they said like its a negligable error, this is not the problem.
    Please help me asap.
    Thank You.
    Regards
    Seema.

    Hi Krishna,
    Thanks for your reply.
    Im trying a file to Idoc scenario.
    So i used Buisiness service for sending side and
                   Buisiness system for receiving side.
    The problem here is the objects are now showing for Buisiness system. But they are not showing for Buisiness service and in the pop up window it is showing as " No objects found".
    Is there any problem if i use Buisiness service ? Please respond.
    waiting for your reply.
    Regards
    Seema.

Maybe you are looking for