Reg: Calling Function from an ESB Service

I receive the following error while calling a db function returning a number value, using db adapter service
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><env:Header/><env:Body><env:Fault xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"><faultcode>env:Server</faultcode><faultstring>oracle.tip.esb.server.common.exceptions.BusinessEventRetriableException: An unhandled exception has been thrown in the ESB system. The exception reported is: "oracle.xml.parser.v2.XMLDOMException: invalid namespace http://xmlns.oracle.com/pcbpel/adapter/db/SOABPEL/FN_NEW_LOAN_APPLICATION/ for prefix xmlns
     at oracle.xml.parser.v2.XMLElement.setAttributeNS(XMLElement.java:1015)
     at oracle.tip.esb.utils.DOMUtil.copyContentsTo(Unknown Source)
     at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.raiseEvent(Unknown Source)
     at oracle.tip.esb.server.service.impl.soap.EventOracleSoapProvider.processMessage(Unknown Source)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doEndpointProcessing(ProviderProcessor.java:869)
     at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
     at oracle.j2ee.ws.server.provider.ProviderProcessor.doRequestProcessing(ProviderProcessor.java:460)
     at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
     at oracle.j2ee.ws.server.WebServiceProcessor.doService(WebServiceProcessor.java:96)
     at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:711)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
     at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
     at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
     at java.lang.Thread.run(Thread.java:595)
</faultstring><faultactor></faultactor></env:Fault></env:Body></env:Envelope>
Please suggest.
Thanx
AJ

Hi AJ,
I am also running into similar exception. In my case I am working with eBiz adapter making a PL/SQL procedure call with in/out parameters. Can you please give little more details about the patch you applied.
Thanks in advance.
Regards,
Rajesh

Similar Messages

  • Call RFC from DELPHI Windows Services Program

    Hi all,
    Are there any way to call RFC from DELPHI Windows Services Program?
    Best regards.
    Munur EBCIOGLU

    Hi again Bhagat,
    1. Yes, it's included on 7.4 ABAP Stack (SAP NetWeaver 7.4 SP8 - Optimized for SAP HANA, Cloud and Mobile - Service Release 2 available now!). In a recent customer, SAP licences GW by user but there are other license model like session licensing: https://store.sap.com/sap/cp/ui/resources/store/html/SolutionDetails.html?pid=0000009470&catID=&pcntry=US&sap-language=EN&_cp_id=id-1385059687642-0
    2. You could install as an AddOn on your 7.3 system, there are many options depending on your desired infrastructure: SAP Gateway deployment options in a nutshell For example our customer have deployed Central Hub Gateway in a standalone stack ABAP to act as an standalone oData bridge between ABAP/nonAbap systems.
    3. You could deploy SAPUI5 apps in 7.x, Java Web Servers or HTTP Web Servers. You must consider your SSO scenario:
    - SSO Logon Tickets. You will need to configurate SSO Logon Tickets between SAP NW Portal & SAP NW Gateway & your backend (ECC, etc). In order to pass SAP session cookie you will need setup SAP Web Dispacther and access portal & gateway throught SAP WD with the same domain.
    - SAML2 Tickets. This scenario lets you provide portal & gateway on different domains enabling SSO. You could configure SAP NW Portal as an Identity Provider and other systems must trust SAP Portal as IdP.
    Cheers

  • How to Call Function from SAPSCRIPT

    I want to Call a function from my SAPSCRIPT to get some data and print the same in the form , Can I get an example for this

    Hi Nandan,
    U cannot directly call function from SAPScript... For that u have to create one include in which u need to write the code. Using Perform... EndPerform u can call the same from SAPScript. See the below example
    u need to write this code in SAPScript
    PERFORM formname IN PROGRAM includename
    USING &field1&                                      
    USING &field2&                                      
    CHANGING &field3&                                     
    ENDPERFORM                                               
    Here includename is your include type program.
    u need to write this code in your include type program..
    FORM formname TABLES in_par STRUCTURE itcsy
                            out_par STRUCTURE itcsy.
    data : var1 like field1,
           var2 like field2,
           var3 like field3.
      READ TABLE in_par WITH KEY 'field1'.
      CHECK sy-subrc = 0.
      var1 = in_par-value.
      READ TABLE in_par WITH KEY 'field2'.
      CHECK sy-subrc = 0.
      var2 = in_par-value.
    now u can call corresponding function using local VAR1 and VAR2. Here u can pass N no of USING parameters.
    After processing on VAR3...
      READ TABLE out_par WITH KEY 'field3'.
      out_par-value = VAR3.
      MODIFY out_par INDEX sy-tabix.
    EndForm.
    Here in_par and out_par are the structures which will be used to communicate with SAPScript. And this is the only way as per my view.
    I m sure this code will work fine. Here i have used dummy variables that u need to change as per your requirement. If u have more queries write me back.
    And yes if this works than dont forget to give the points.
    Regards,
    Sagar

  • Calling OCCI from a windows service

    Hello, I am trying to call OCCI from a windows service. And as soon as I put in the createEnvironment call the service will not load. I get an Error 1053: The service did not respond to the start or control request in a timely fashion. Anyone else seen this problem? Any ideas?

    I'm using 10.2.0.1.0 downloaded a couple of weeks ago.
    My english is not so good to completelly understand your last sentence.
    Nobody directed me in using OCCI in a service. I had to face the proble to let my I.R. engine write XML data into an XMLTYPE object in Oracle, I downloaded the OCCI library and samples and build some code for my test.
    Everityhing seems to work properly using Clob containers, while XMLType columns can be created but I can't read the value as the result of a select.
    Anyway, OCCI 10.2.0.1.0 compiled with Visual C++ 2008 (VC9) with a couple of tricks with manifest to use oraocci10.lib (built for VC8) works for me even as a service.
    I have to say that this code is in a DLL that I dynamically load and use.
    Does it make sense for you?

  • Call function from data base with clob input parameter.

    Hello,
    In this project I use Jdev 11g.
    I call function from database.
    create or replace function get_fa_list (
    p_fa_id_list in clob
    return sys_refcursor
    is
    vCursor sys_refcursor;
    begin
    put_msg ('begin');
    if p_fa_id_list is null then
    put_msg ('CLOB is null!');
    else
    put_msg ('size CLOB: ' || dbms_lob.getlength (p_fa_id_list));
    end if;
    put_msg ('Save');
    open vCursor for
    select rownum as id, s.*
    from (
    select f.latitude, f.longitude, count (distinct f.res_id) as res_count, count (*) as fa_count, 16711680 as color, res_concat_distinct (f.res_id) as station_list
    from mv_frequency_assignment f, table (SplitClob (p_fa_id_list, ',')) l
    where f.ext_system = 'BI' and
    f.ext_sys_id = l.column_value
    group by f.latitude, f.longitude
    ) s;
    put_msg ('Open and End');
    return vCursor;
    end get_fa_list;
    I use TopLink in ejb.
    i use follow code for call function and get result.
    public List<TmpResPoints> findAllPointsBI(String p_id){
    UnitOfWork uow = getSessionFactory().acquireUnitOfWork();
    uow.beginEarlyTransaction();
    StoredFunctionCall call = new StoredFunctionCall();
    call.setProcedureName("get_fa_list");
    call.useUnnamedCursorOutputAsResultSet();
    ClobDomain c = new ClobDomain(p_id);
    //System.out.println(c.toString());
    call.addNamedArgumentValue("p_fa_id_list", c);
    ReadAllQuery query = new ReadAllQuery();
    query.setReferenceClass(TmpResPoints.class);
    query.setCall(call);
    List<TmpResPoints> result = (List<TmpResPoints>)uow.executeQuery(query);
    uow.commit();
    uow.release();
    return result;
    But size parameter "p_fa_id_list" is 0. (geting from temp table in Data base). this code in function >>
    if p_fa_id_list is null then
    put_msg ('CLOB is null!');
    else
    put_msg ('size CLOB: ' || dbms_lob.getlength (p_fa_id_list));
    end if;)
    How I can call this function from dataBase and get result?
    thx,
    Demka.

    What is the SQL generated?
    The argument should just be the Clob value (a String) not the domain object.
    Also try addNamedArgument, and then pass the named argument to the query.
    James : http://www.eclipselink.org

  • Send data to ECC table through RFC Call function from SAP B1 via  b1if

    Hi,
    I have created scenario in B1if which triggers from SAP B1, now I have to send this data in to ECC table, so I have created scenario for that with inbound SAP B1, outbound void and in process RFC Call atom is there but I am not getting data in receiver and also how to write xml to send data in RFC function. Function for RFC has configured from ECC end and have access of that function.
    So please help me to send data to ECC table through RFC Call function from SAP B1 (9.0) via b1if
    Thanks

    Solved by my own.

  • Calling Illustrator from a Windows Service

    Hello,
    A project I'm working on has an internal document conversion process that uses Adobe Illustrator.  The conversion script is in Javascript and uses the Illustrator SDK to go through the document and extract some information. We have a script that initiates this by calling Illustrator and instructing it to run the Javascript file.  This whole process works well.
    To make this easier for people to use, we have a program that runs on a server and watches a special directory.  When a file is dropped into that directory, this program notices, runs the script, and saves the output in another folder.  This process works well, too.
    To ensure that this program stays running and starts immediately when the system boots, we would like to run it as a Windows Service.  This is where we run into trouble.  Our program runs fine as a service, except that when we call Illustrator, it just hangs without executing our script.
    I don't see any output or error messages that would help us diagnose the problem.
    I was wondering if anybody else had tried calling Illustrator from a Windows Service, and maybe had some suggestions for getting it working?
    Thanks!
    -----Scott.

    I'm afraid I don't know anything that might help you on this one. I wouldn't have thought Illustrator was doing anything that unusual that might cause running from a Service grief. The only two suggestions I can think of are ones you may already have tried:
    1) check the event viewer -- there might be something there that doesn't show up in stderr or stdout
    2) Try posting in the Scripting forum; it feels like they might be more likely to have tried something like this than people in here. This is typically for plugin development, thoug I don't blame you at all for posting here -- it certainly would have seemed worth a shot to me Anyways, the AI Scripting forum is in:
    http://forums.adobe.com/community/illustrator/illustrator_scripting
    Hopefully someone there will have tried this and can help you out. Good luck!

  • Calling function from list of values section?

    can i call a function from list of values(LOV) section as well? I know we can sql query but udf is supported?

    See this recent thread: Display as Text (LOV) or join
    Scott

  • Calling function from PL/SQL block

    Hi,
    A very simple question.
    A have a function called "test1" in my database. It is there i double chekked.
    I would like to call this function from a block:
    DECLARE
    BEGIN
    TEST1(1202);
    END;
    This gives me an error.
    Why is this?

    user610868 wrote:
    Hi,
    A very simple question.
    A have a function called "test1" in my database. It is there i double chekked.
    I would like to call this function from a block:
    DECLARE
    BEGIN
    TEST1(1202);
    END;
    This gives me an error.
    Why is this?Hello
    A very very basic thing to do when you get an error is to include details of it. That helps narrow it down from one of the 1000s of potential Oracle errors it could be.
    Anyway, a function returns a value, and in PL/SQL you need to capture that otherwise you'll get "an error". Modify your code like so
    DECLARE
       l_Test1Val     VARCHAR2(4000); --CHANGE THIS TO BE THE SAME AS THE RETURN TYPE FOR YOUR FUNCTION
    BEGIN
       l_Test1Val :=  TEST1(1202);
    END;HTH
    David
    Edited by: Bravid on Oct 25, 2011 3:57 PM
    removed a ;

  • Calling Functions From Import Integration Script

    I've got an import integration script that runs fine, however I also have several DataPump scripts that are used in FDM to change specific columns as they come in. I can take the code from the scripts and add to the Import Integration script, but I would rather just call those other functions from the VBScript. I don't see any docs on this, and I'm just wondering if anyone has done this or can describe how I can do it.
    Is it possible? Since the standard import scripts reference the strField and the strRecord, can these functions be called from the import integration script?

    strField and strRecord are arguments passed by the application to the import function. The represent the field as defined by the import format and the record that is being processed during the import.
    Given that, I'm not sure how to answer your question.

  • Calling function from sql folder vs report

    Hi,
    A report based on a custom sql folder is taking a long time to run. One of the things that I noticed is that when I run the sql in plsql it takes a long time, but if I remove the row where I call a function, it runs pretty quickly.
    In general, is there a difference between running a function from the sql custom folder and calling it from the report itself?
    Thanks.
    Leah

    Hi Tamir,
    I might check out the execution plans, but truthfully, understanding the plans and the meaning of the differences is not my strong point.
    I thought that maybe there was some general rule that, for instance, it is better to keep functions out of the sql folder and use them in a condition in the report itself, or the opposite, or that maybe it makes no difference at all.
    I appreciate the response.
    Thanks.
    Leah

  • What is the syntax for calling function from class file by jsp

    does anyone here knows what is the syntax of how to call a function from java class file by javascript code or any way to call it?
    and where should i put the calling function code? because the function is called depend on the user click.
    for example
    <%=pc.functionName(a,b)%>
    for the variable a and b, how can i get the value from html textbox and put it in a and b...
    urgent needed...
    thx

    Jsp's are executed before the Html forms are created and loaded. Dont try to use a java code function calling on a javascript click. You'll have to explicitly redirect it into a servlet where in you can call the function you want.
    Well! another way could be using AJAX. That seems to be powerfull enough and it might also serve your purpose.
    Hope this helps

  • Put SQL query in a function/ call function from region

    How can I write a SQL query (like SELECT EMPNO, ENAME, JOB FROM EMP) as PL/SQL function, and then call this function from the PL/SQL Function Returning SQL Statement region?
    Thanks, Tom

    thanks jverd for your quick reply.
    I know passing in a reference to an object will do the job if I want to change the value several parameters in one function call.
    But I want to ask, is there any other ways?
    the following code works.....
    public class TestParameter {
         public static void main(String[] args) {
              Test2 t2 = new Test2();
              invokeChange(t2);
              System.out.println("x = " + t2.x + "\t y = " + t2.y);
         static void invokeChange(Test2 t2) {
              t2.x = 10;
              t2.y = 15;          
    class Test2 {     
         int x;
         int y;     
    }

  • Getting session hang When calling Function from SQL query

    Hi All,
    I am using Oracle 8.1.7.4.0. I have a fucntion in a Package and I am calling it from the SQL query. When I am firing the query my oracle session is going to hang position and I am not able to any thing. I have to kill the session.
    But this same thing is working fine in Oracle 9.i.
    There are no out parameter and no DML, DDL and DCL statement in this fucntion.
    Could you please get back me what is the problem on it.
    Regards
    SUN

    Check why your session hangs.
    Just a few ideas:
    * Blocking locks?
    * Endless loop?
    * Performance (maybe it is just slow in orac8i and you have to wait a bit longer). Check the execution plans of the SQL statements in your function.
    * Don't use a function, but direct SQL, it is faster in both versions.

  • Calling function from Backing Bean or JSP page

    We are on Jdeveloper 10.1.3.3.0, ADF Faces, JSF Faces .., Currently there is a function call from Javascript event (onmouseover) in the JSP page. I want to call this function from a backing bean or JSP page, as I have to pass some values to this function.
    For Ex., I have a function call like return submit('A','B','Test'); on the Javascript event (onmouseover) in jsp page. I want to remove this function from the javascript event and call from backing bean or jsp page to pass some values into the submit() function. I appreciate if anyone can give some example of how to call this function from backing bean or jsp page in the <SCRIPT> or <SCRIPTLET>
    Thanks,
    Ram

    A use case would be helpful so that we can get a better idea of what you want to do.
    As a general rule, there is no way to call a client side Javascript function from a backing bean, which is server side. However, there are ways to inject information from a backing bean into your Javascript call. For instance, I have an application that uses Google Maps API. It has an onload call to a Javascript function that builds the map and designates it's center point. The center point comes from a backing bean as latitude and longitude properties. So here is my body tag:
    <afh:body onload="initialize(#{backing_searchResults.latitude},#{backing_searchResults.longitude},#{searchCriteria.distance})"
              onunload="GUnload()">onload calls the Javascript function called initialize, and passes the latitude, longitude, and distance from the bean. Is the function really being called from my backing bean? No - the parameters are hard coded into the onload event code when the page is rendered. Does it do the job? Sure it does.

Maybe you are looking for