Reg. can we display alv grid using field groups (extracts)
Hi,
can we display alv grid using field groups (extracts). is this possible. i have to develop a blocked alv.
tnks
Yerukala Setty
No, you will need the data in an internal table to use ALV.
Cheers
Allan
Similar Messages
-
Display ALV GRID Using Dynamic Internal Table
Hi all,
I try to display ALV Grid using Dynamic Internal Table, but when i activate my program, i get an error message "DYN_TABLE" is not type-compatible with formal parameter "IT_OUTTAB". ( DYN_TABLE is my Dynamic Itab).
Anybody can help me how to passing Dynamic Itab into ALV Grid ?? Of ALV Grid only accept static Itab ??
Thanks,Hi Vijay,
It's doesn't work, and make new error "Formal parameter "IT_OUTTAB[]" does not exist. However, the parameter "IT_OUTTAB" has a similar name."
Because the method is:
CALL METHOD <ref. var. to CL_GUI_ALV_GRID>->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE = <any type (ANY)>
I_STRUCTURE_NAME = <string of type DD02L-TABNAME>
IS_VARIANT = <structure of type DISVARIANT>
I_SAVE = <var. of type CHAR01>
I_DEFAULT = <var. of type CHAR01>
IS_LAYOUT = <structure of type LVC_S_LAYO>
IS_PRINT = <structure of type LVC_S_PRNT>
IT_SPECIAL_GROUPS = <internal table of type LVC_T_SGRP>
IT_TOOLBAR_EXCLUDING = <internal table of type UI_FUNCTIONS>
IT_HYPERLINK = <internal table of type LVC_T_HYPE>
IT_ALV_GRAPHICS = <internal table of type DTC_T_TC>
CHANGING
IT_OUTTAB = <internal table>
IT_FIELDCATALOG = <internal table of type LVC_T_FCAT>
IT_SORT = <internal table of type LVC_T_SORT>
IT_FILTER = <internal table of type LVC_T_FILT>
Thanks, -
Hide some cells while displaying ALV GRID !
Hi guyz!
Back with lill query,
While displaying ALV GRID using REUSE_ALV_GRID... FMs ,i need to hide
some cells by default, when the lists is generated.But those cells should
be availble to be displayed by the user from ALV layout settings.
Please advise
Thanks
jahanHi, Check for fm documentation.
Only relevant if layout parameter
LAYOUT-GET_SELINFOS of IMPORTING structure IS_LAYOUT is set.
Complex type for modifying information displayed on the selection dialog box:
mode: 'R' = Only entries passed in internal table
IS_SEL_HIDE-T_ENTRIES are output on
the dialog box. Selection information
obtained by the list tool by reading the
selection screen again (only if the report
is called with selection screen) are
replaced by the entries passed.
'S' = The selection information obtained by the
list tool by reading the selection screen
of the calling report again, are modified
by the entries of table
IS_SEL_HIDE-T_ENTRIES.
t_entries: Table with selection information
t_entries-mode: 'A' = Display selection information of the current
table row on the information dialog box.
'D' = Do not display selection information of the
the Select option or of parameter SELNAME
on the dialog box.
t_entries-selname: (required only if t_entries-mode = 'D')
name of Select option or parameter
The following table fields are only required if t_entries-mode = 'A'. They contain the selection information to be added.
t_entries-field: DDIC field name of the field for which selection
information is to be displayed
t_entries-table: DDIC table name of t_entries-field.
t_entries-stext: Field description on the information dialog box.
If t_entries-field and t_entries-table were
filled, this text is taken from the DDIC.
t_entries-valuf: Selection condition from-value (external format)
t_entries-valut: Selection condition to-value (external format)
t_entries-sign0: (I)nclusive (E)xclusive
t_entries-optio: All values of the option field of the Select
option are allowed.
The remaining fields are used internally and are irrelevant to the caller.
aRs -
How to make a field manadatory within ALV Grid using methods and classes
Hi,
I am using ALV Grid using set_table_for_first_display
inside my dialog programming. I have a field called project number inside my grid which has to be made as mandatory field.
I have defined a method called catch_data_changed inside my class lcl_event_receiver. This method captures the changes made to one of the fields inside my ALV grid and displays all the default values of the other fields from the grid.
Now, i have to make project number which is one of my fields inside my ALV grid as mandatory. At the field catalog level i did not find any such option for making a field as required field.
Is there any other way, i can accomplish this within the ALV grid?from my understanding from ur question, i understood that u want the editable field inside alvgrid to be mandatory.
i dont know anthing in fieldcat, but u can try the following logic.
FORM DATA_CHANGED USING P_ER_DATA_CHANGED TYPE REF TO
CL_ALV_CHANGED_DATA_PROTOCOL .
DATA: L_VALUE TYPE LVC_VALUE,
ls_mod_cell type lvc_s_modi.
READ TABLE P_ER_DATA_CHANGED->MT_MOD_CELLS INTO LS_MOD_CELL.
if sy-subrc = 0.
CALL METHOD P_ER_DATA_CHANGED->GET_CELL_VALUE
EXPORTING
I_ROW_ID = LS_MOD_CELL-row_id
I_FIELDNAME = LS_MOD_CELL-fieldname
IMPORTING
E_VALUE = L_VALUE.
IF LS_MOD_CELL-FIELDNAME <> 'fieldname what u want'
MESSAGE 'ENTER VALUE INTO (fieldname u want) ' TYPE 'I'.
ENDIF.
ELSE.
MESSAGE 'ENTER VALUE INTO (fieldname u want) ' TYPE 'I'.
ENDIF. -
Display error message in ALV grid using OOPS
Hi,
I have a requirement to display report in ALV. I have created ALV grid using OOPS with three editable cells and 1 button on toolbar. When user enter values in Ediatble cell and click on the Toolbar button, sales order item should be assigned to contract.
When the user select the row and click on toolbar button, a salesorder item should be assigned to contract and i am using BAPI and fine with BAPI. All the error message should be displayed in a popup and the corresponding failed row should change its color .
Once the user identified the failed row, he can edit the value in the ediatble cells and should reprocess in the same screen ( without going back to selection screen).
To display POP Up, I am using FM BAL_LOG_CREATE, BAL_LOG_MSG_ADD, BAL_DSP_PROFILE_NO_TREE_GET, BAL_CNTL_CREATE.
by using above 4 FM , i can display POP UP. but i cannot change the color of the failed row.
Once I identified the failed row and reprocess from the same screen , I am successful in processing the failed row, but my error log still has the reprocessed row as failed row because, error log is not refreshing.
Please suggest me how to clear error log which was created by using the above FM's and change the color of the failed row .
Thanks in AdvanceHi
Please suggest me how to clear error log which was created by using the above FM's....
U can use BAL_LOG_REFRESH
....and change the color of the failed row
You need to insert a new field for Colour Attributes in your output table and input its name in the layout structure:
IS_LAYOUT-INFO_FNAME = <field name for colour>
The field has to be a CHAR 3 and its value can be -
> Cxy
C is a constant
x is the colour number (from 1 to 9)
y is intensified (0 = off, 1 = on)
After changing the value of output table you need to run the method REFRESH_TABLE_DISPLAY for refreshing the output
Max -
hi,
i have two problems in displaying ALV grid output Using Oops.
1) How to modify the fieldcatalog after we getting a field catalog using general FM.
2) initialy it is displaying 13 fields but there are 63 fields .
eventhough we chage the layout to 63 fields it is displaying only 13 fields , these 13 fields may be different based on our selection but count of displayed fileds are same . how can display 63 fields at a time .Hi,
You can chnage using below code:
loop at gt_fieldcat.
if <gt_fieldcat-field_name> = 'FIELDNAME'.
endif.
modify gt_fieldcat.
clear gt_fieldcat.
endloop.
Make sure that all the field should not have no_out = 'X' and tech = 'X'.
Thanks,
Sriram Ponna. -
Disable editable field in ALV grid using OOPS
I have following requirements,
Displaying ALV grid output with most of the fields editable.
Validations on data entered for each fields,for error messages
Query :
I want to make all the fields except the field in ERROR in display only mode
similar to case when we do validation of fields in table controls.HI
check the below links lot of info and examples r there for OOPS
http://www.sapgenie.com/abap/OO/index.htm
http://www.geocities.com/victorav15/sapr3/abap_ood.html
http://www.brabandt.de/html/abap_oo.html
Check this cool weblog:
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
/people/thomas.jung3/blog/2004/12/08/abap-persistent-classes-coding-without-sql
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b6254f411d194a60000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sap-img.com/
http://www.sapgenie.com/
http://help.sap.com
http://www.sapgenie.com/abap/OO/
http://www.sapgenie.com/abap/OO/index.htm
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://www.sapgenie.com/abap/OO/index.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
http://www.sapgenie.com/abap/OO/
these links
http://help.sap.com/saphelp_47x200/helpdata/en/ce/b518b6513611d194a50000e8353423/content.htm
For funtion module to class
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5954f411d194a60000e8353423/content.htm
for classes
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b5c54f411d194a60000e8353423/content.htm
for methods
http://help.sap.com/saphelp_47x200/helpdata/en/08/d27c03b81011d194f60000e8353423/content.htm
for inheritance
http://help.sap.com/saphelp_47x200/helpdata/en/dd/4049c40f4611d3b9380000e8353423/content.htm
for interfaces
http://help.sap.com/saphelp_47x200/helpdata/en/c3/225b6254f411d194a60000e8353423/content.htm
For Materials:
1) http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf -- Page no: 1291
2) http://esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
3) http://esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
4) http://esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
5) http://esnips.com/doc/92be4457-1b6e-4061-92e5-8e4b3a6e3239/Object-Oriented-ABAP.ppt
6) http://esnips.com/doc/448e8302-68b1-4046-9fef-8fa8808caee0/abap-objects-by-helen.pdf
7) http://esnips.com/doc/39fdc647-1aed-4b40-a476-4d3042b6ec28/class_builder.ppt
8) http://www.amazon.com/gp/explorer/0201750805/2/ref=pd_lpo_ase/102-9378020-8749710?ie=UTF8
1) http://www.erpgenie.com/sap/abap/OO/index.htm
2) http://help.sap.com/saphelp_nw04/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
Check these sample code
data : begin of it_mara occurs 0,
mark type flag,
matnr type matnr,
mtart type mtart,
meins type meins,
end of it_mara.
data : begin of it_mara1 occurs 0,
mark type flag,
matnr type matnr,
mtart type mtart,
meins type meins,
end of it_mara1.
data : begin of it_mara2 occurs 0,
mark type flag,
matnr type matnr,
mtart type mtart,
meins type meins,
end of it_mara2.
data : t_fieldcat type lvc_t_fcat,
t_fieldcat1 type lvc_t_fcat,
s_fieldcat like line of t_fieldcat.
data : s_layout type lvc_s_layo.
data : control type ref to cl_gui_custom_container,
grid type ref to cl_gui_alv_grid.
data: begin of wa ,
mark type flag,
matnr type matnr,
mtart type mtart,
meins type meins,
end of wa.
class lcl_events_box definition.
public section.
methods :
*Handler_Data_Changed for event Data_Changed of cl_gui_alv_grid
*imporTing er_data_changed,
Handler_User_Command for event User_Command of cl_gui_alv_grid
imporTing e_ucomm,
Handler_ToolBar for event ToolBar of cl_gui_alv_grid
importing E_object E_interactive.
endclass.
class lcl_events_box implementation.
method Handler_user_command.
PERFORM FORM_USERCOMMAND CHANGING E_UCOMM.
endmethod.
method Handler_ToolBar.
PERFORM FORM_TOOLBAR CHANGING E_OBJECT E_INTERACTIVE
E_OBJECT->MT_TOOLBAR.
endmethod.
ENDCLASS.
start-of-selection.
data : w_events type ref to lcl_events_box.
select matnr mtart meins from mara into corresponding fields of table
it_mara.
call screen 100.
*& Module pbo_module OUTPUT
text
MODULE pbo_module OUTPUT.
if GRID is initial.
CREATE OBJECT CONTROL
EXPORTING
CONTAINER_NAME = 'CUST_CTRL'.
CREATE OBJECT GRID
EXPORTING
I_PARENT = CONTROL.
PERFORM BUILD_CATALOG.
PERFORM BUILD_CATALOG1.
PERFORM BUILD_LAYOUT.
CALL METHOD GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = s_layout
CHANGING
IT_OUTTAB = it_mara[]
IT_FIELDCATALOG = t_fieldcat.
CREATE OBJECT W_EVENTS.
SET HANDLER : W_EVENTS->HANDLER_TOOLBAR FOR GRID,
W_EVENTS->HANDLER_USER_COMMAND FOR GRID.
CALL METHOD GRID->SET_TOOLBAR_INTERACTIVE.
ELSE.
call method grid->refresh_table_display.
ENDIF.
ENDMODULE. " pbo_module OUTPUT
*& Form BUILD_CATALOG
FORM BUILD_CATALOG .
S_FIELDCAT-COL_POS = '1'.
S_FIELDCAT-FIELDNAME = 'MARK'.
S_FIELDCAT-CHECKBOX = 'X'.
S_FIELDCAT-eDIT = 'X'.
APPEND S_FIELDCAT TO T_FIELDCAT.
CLEAR S_FIELDCAT.
S_FIELDCAT-COL_POS = '2'.
S_FIELDCAT-FIELDNAME = 'MATNR'.
S_FIELDCAT-SCRTEXT_M = 'MATERIAL'.
APPEND S_FIELDCAT TO T_FIELDCAT.
S_FIELDCAT-COL_POS = '3'.
S_FIELDCAT-FIELDNAME = 'MTART'.
S_FIELDCAT-SCRTEXT_M = 'MATERL TYPE'.
APPEND S_FIELDCAT TO T_FIELDCAT.
S_FIELDCAT-COL_POS = '4'.
S_FIELDCAT-FIELDNAME = 'MEINS'.
S_FIELDCAT-SCRTEXT_M = 'UOM'.
APPEND S_FIELDCAT TO T_FIELDCAT.
ENDFORM. " BUILD_CATALOG
*& Form BUILD_LAYOUT
text
--> p1 text
<-- p2 text
FORM BUILD_LAYOUT .
S_LAYOUT-ZEBRA = 'X'.
S_LAYOUT-CWIDTH_OPT = 'X'.
S_LAYOUT-GRID_TITLE = 'Material Details'.
ENDFORM.
" BUILD_LAYOUT////////////////////////////////////
" USER_COMMAND_0100 INPUT
*& Form FORM_USERCOMMAND
text
<--P_E_UCOMM text
form FORM_USERCOMMAND changing p_e_ucomm.
CASE P_E_UCOMM.
WHEN 'INT1'.
DO.
READ TABLE IT_MARA INDEX SY-INDEX TRANSPORTING MARK MATNR.
IF SY-SUBRC <> 0.
EXIT.
ENDIF.
IF IT_MARA-MARK = 'X'.
read table it_mara into wa TRANSPORTING MATNR MTART MEINS .
MOVE-CORRESPONDING WA TO IT_MARA1.
READ TABLE IT_MARA1 TRANSPORTING MATNR MTART MEINS .
MOVE-CORRESPONDING IT_MARA1 TO IT_MARA2.
APPEND IT_MARA2.
CALL METHOD GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = s_layout
CHANGING
IT_OUTTAB = it_mara2[]
IT_FIELDCATALOG = t_fieldcat1.
SET PARAMETER ID 'MAT' FIELD IT_MARA-MATNR.
CALL TRANSACTION 'MM02'.
. ENDIF.
ENDIF.
ENDDO.
ENDCASE.
endform. " FORM_USERCOMMAND
*& Form FORM_TOOLBAR
text
<--P_E_OBJECT text
<--P_E_INTERACTIVE text
<--P_E_OBJECT_>MT_TOOLBAR text
FORM FORM_TOOLBAR CHANGING P_E_OBJECT TYPE REF TO
CL_ALV_EVENT_TOOLBAR_SET
P_E_INTERACTIVE
MT_TOOLBAR TYPE TTB_BUTTON.
DATA WAL_BUTTON TYPE STB_BUTTON.
*WAL_BUTTON-ICON = ICON_status_reverse.
WAL_BUTTON-TEXT = 'GO'.
WAL_BUTTON-QUICKINFO = 'PROCEED'.
waL_button-FUNCTION = 'INT1'.
WAL_BUTTON-BUTN_TYPE = 0.
WAL_BUTTON-DISABLED = SPACE.
insert WAL_BUTTON INTO P_E_OBJECT->MT_TOOLBAR index 1.
endform. " FORM_TOOLBAR
*& Module PF-STATUS OUTPUT
text
module PF-STATUS output.
set pf-status 'Z7PSTAT'.
endmodule. " PF-STATUS OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
module USER_COMMAND_0100 input.
CASE SY-UCOMM.
WHEN 'BACK'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE PROGRAM.
ENDCASE.
endmodule. " USER_COMMAND_0100 INPUT
*& Form BUILD_CATALOG1
text
--> p1 text
<-- p2 text
form BUILD_CATALOG1 .
S_FIELDCAT-COL_POS = '1'.
S_FIELDCAT-FIELDNAME = 'MATNR'.
S_FIELDCAT-SCRTEXT_M = 'MATERIAL'.
APPEND S_FIELDCAT TO T_FIELDCAT1.
S_FIELDCAT-COL_POS = '2'.
S_FIELDCAT-FIELDNAME = 'MTART'.
S_FIELDCAT-SCRTEXT_M = 'MATERL TYPE'.
APPEND S_FIELDCAT TO T_FIELDCAT1.
S_FIELDCAT-COL_POS = '3'.
S_FIELDCAT-FIELDNAME = 'MEINS'.
S_FIELDCAT-SCRTEXT_M = 'UOM'.
APPEND S_FIELDCAT TO T_FIELDCAT1.
endform. " BUILD_CATALOG1
check the below link may be useful for you
http://www.sapdevelopment.co.uk/reporting/alvhome.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVALV/BCSRVALV.pdf
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
<b>Reward all helpfull answers</b>
Regards -
Displaying items in a single line in ALV grid using ALV_TOP_OF_PAGE.
Hello Guys,
I am having a problem in displaying items in a single line in the ALV Grid using event ALV_TOP_OF_PAGE.
My requirement is to group items on a single line i.e. in the example below, Vendor code and posting date are on the same line. The next line the prints Vendor Name and Document no.
Vendor Code: 123123 Posting Date : 01.01.2011
Vendor Name: ABCD Document No: 152246598.
Here is my code in subroutine 'ALV_TOP_OF_PAGE',
wa_list_comments-typ = 'S'.
wa_list_comments-key = ''.
wa_list_comments-info = 'Vendor Code'.
APPEND wa_list_comments TO it_list_comments.
wa_list_comments-typ = 'S'.
wa_list_comments-key = ''.
wa_list_comments-info = 'Posting Date'.
APPEND wa_list_comments TO it_list_comments.
The above code prints in the following format i.e one below the other,
Vendor Code: 123123
Posting Date : 01.01.2011.
I also tried using HTML_TOP_OF_PAGE, but it didn't work.
Can anybody please help me out with this.
Regards,
Danish.Hi Danish,
Your problem is with the alignment and you need some fix positions .
The solution i feel is u can use as below :
In CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
use
i_callback_html_top_of_page = 'HTML_TOP_OF_PAGE'.
Now on calling routine call use cl_dd_document class :
FORM html_top_of_page USING document TYPE REF TO cl_dd_document .
data : doctable TYPE REF TO cl_dd_table_element,
col1_t1 TYPE REF TO cl_dd_area,
col2_t1 TYPE REF TO cl_dd_area,
col1_t2 TYPE REF TO cl_dd_area,
col2_t2 TYPE REF TO cl_dd_area.
add quick table with five columns
CALL METHOD lw_document->add_table
EXPORTING
no_of_columns = 2
border = '0'
cell_background_transparent = ' '
width = '100%'
IMPORTING
table = doctable.
Filling columns in row
CALL METHOD doctable->add_column
EXPORTING
width = '40%'
IMPORTING
column = col1_t1.
Filling columns in row
CALL METHOD doctable->add_column
EXPORTING
width = '60%'
IMPORTING
column = col2_t1.* Filling columns in row
Call method doctable->new_row.
CALL METHOD doctable->add_column
EXPORTING
width = '40%'
IMPORTING
column = col1_t2.
Filling columns in row
CALL METHOD doctable->add_column
EXPORTING
width = '60%'
IMPORTING
column = col2_t2.
*Now adding the texts
lw_text1 = 'your first text'
CALL METHOD col1_t1->add_text
EXPORTING
text = lw_text.
*Similarly add text for other columns
*Adujust % in width to adjust the column as required
Endform.
Hope this will solve your problem . -
Error whil adding Header to the ALV grid using OO
Hi Guys,
I want to display the Header for the ALV grid using Splitter .
when i am doing like that .I am getting a screen on the top of that screen I am getting a EMPTY screen .I don't know why likat.
What i need is just to display a Grid with header?Can anybody Please help me reagarding this problem.
the Code is Below.
*& Report Z_TEST_PGM
REPORT Z_TEST_PGM NO STANDARD PAGE HEADING
LINE-SIZE 120 MESSAGE-ID zotc.
Tables : CKMLMV003 , CKMLMV001.
TYPE-POOLS: slis.
Types : Begin of t_CKMLMV003_out,
WERKS type CKMLMV003-WERKS,
MATNR type CKMLMV003-MATNR,
MISCH_VERH type CKMLMV003-MISCH_VERH,
KALNR_BAL type CKMLMV003-KALNR_BAL,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
MGTYP type CKMLMV003-MGTYP,
End of t_CKMLMV003_out,
Begin of t_CKMLMV001_out,
MATNR type CKMLMV001-MATNR,
KALNR type CKMLMV001-KALNR,
LIFNR_ND type CKMLMV001-LIFNR_ND,
EKORG_ND type CKMLMV001-EKORG_ND,
End of t_CKMLMV001_out,
Begin of t_CKMLMV003_Temp,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
End of t_CKMLMV003_Temp,
Begin of t_Final_out,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
WERKS type CKMLMV003-WERKS,
LIFNR_ND1 type CKMLMV001-LIFNR_ND,
MISCH_VERH1 type CKMLMV003-MISCH_VERH,
LIFNR_ND2 type CKMLMV001-LIFNR_ND,
MISCH_VERH2 type CKMLMV003-MISCH_VERH,
LIFNR_ND3 type CKMLMV001-LIFNR_ND,
MISCH_VERH3 type CKMLMV003-MISCH_VERH,
LIFNR_ND4 type CKMLMV001-LIFNR_ND,
MISCH_VERH4 type CKMLMV003-MISCH_VERH,
LIFNR_ND5 type CKMLMV001-LIFNR_ND,
MISCH_VERH5 type CKMLMV003-MISCH_VERH,
LIFNR_ND6 type CKMLMV001-LIFNR_ND,
MISCH_VERH6 type CKMLMV003-MISCH_VERH,
LIFNR_ND7 type CKMLMV001-LIFNR_ND,
MISCH_VERH7 type CKMLMV003-MISCH_VERH,
LIFNR_ND8 type CKMLMV001-LIFNR_ND,
MISCH_VERH8 type CKMLMV003-MISCH_VERH,
LIFNR_ND9 type CKMLMV001-LIFNR_ND,
MISCH_VERH9 type CKMLMV003-MISCH_VERH,
LIFNR_ND10 type CKMLMV001-LIFNR_ND,
MISCH_VERH10 type CKMLMV003-MISCH_VERH,
LIFNR_ND11 type CKMLMV001-LIFNR_ND,
MISCH_VERH11 type CKMLMV003-MISCH_VERH,
LIFNR_ND12 type CKMLMV001-LIFNR_ND,
MISCH_VERH12 type CKMLMV003-MISCH_VERH,
LIFNR_ND13 type CKMLMV001-LIFNR_ND,
MISCH_VERH13 type CKMLMV003-MISCH_VERH,
End of t_Final_out,
Begin of t_Final_out1,
MATNR type CKMLMV003-MATNR,
GJAHR type CKMLMV003-GJAHR,
PERIO type CKMLMV003-PERIO,
LIFNR_ND1 type CKMLMV001-LIFNR_ND,
MISCH_VERH1 type CKMLMV003-MISCH_VERH,
LIFNR_ND2 type CKMLMV001-LIFNR_ND,
MISCH_VERH2 type CKMLMV003-MISCH_VERH,
LIFNR_ND3 type CKMLMV001-LIFNR_ND,
MISCH_VERH3 type CKMLMV003-MISCH_VERH,
LIFNR_ND4 type CKMLMV001-LIFNR_ND,
MISCH_VERH4 type CKMLMV003-MISCH_VERH,
LIFNR_ND5 type CKMLMV001-LIFNR_ND,
MISCH_VERH5 type CKMLMV003-MISCH_VERH,
LIFNR_ND6 type CKMLMV001-LIFNR_ND,
MISCH_VERH6 type CKMLMV003-MISCH_VERH,
LIFNR_ND7 type CKMLMV001-LIFNR_ND,
MISCH_VERH7 type CKMLMV003-MISCH_VERH,
LIFNR_ND8 type CKMLMV001-LIFNR_ND,
MISCH_VERH8 type CKMLMV003-MISCH_VERH,
LIFNR_ND9 type CKMLMV001-LIFNR_ND,
MISCH_VERH9 type CKMLMV003-MISCH_VERH,
LIFNR_ND10 type CKMLMV001-LIFNR_ND,
MISCH_VERH10 type CKMLMV003-MISCH_VERH,
LIFNR_ND11 type CKMLMV001-LIFNR_ND,
MISCH_VERH11 type CKMLMV003-MISCH_VERH,
LIFNR_ND12 type CKMLMV001-LIFNR_ND,
MISCH_VERH12 type CKMLMV003-MISCH_VERH,
LIFNR_ND13 type CKMLMV001-LIFNR_ND,
MISCH_VERH13 type CKMLMV003-MISCH_VERH,
End of t_Final_out1.
Global Structures *
Data : i_CKMLMV003_str type t_CKMLMV003_out,
i_CKMLMV001_str type t_CKMLMV001_out,
i_Final_str type t_Final_out,
i_Final_str1 type t_Final_out,
i_CKMLMV003_Temp type t_CKMLMV003_Temp.
Global Internal Tables *
Data : i_CKMLMV003_out type standard table of t_CKMLMV003_out,
i_CKMLMV001_out type standard table of t_CKMLMV001_out,
i_Final_out type standard table of t_Final_out,
i_Final_out1 type standard table of t_Final_out.
ALV Report Internal tables *
DATA : t_fieldcatalog TYPE slis_t_fieldcat_alv,
s_fieldcatalog TYPE slis_fieldcat_alv,
t_basic_fieldcatalog TYPE slis_t_fieldcat_alv,
s_basic_fieldcatalog TYPE slis_fieldcat_alv,
t_sort TYPE slis_t_sortinfo_alv,
v_repid TYPE sy-repid.
*ALV Header declarations
Data: t_header type slis_t_listheader,
i_header_str type slis_listheader,
i_line_event_str TYPE slis_alv_event,
i_events TYPE slis_t_event,
wa_layout type slis_layout_alv.
Data : grid1 type ref to cl_gui_alv_grid,
g_custom_container1 type ref to cl_gui_custom_container,
grid2 type ref to cl_gui_alv_grid,
g_custom_container2 type ref to cl_gui_custom_container,
i_FCAT TYPE LVC_T_FCAT,
i_FCAT_str type lvc_s_fcat,
Structure for layout
i_layout_s TYPE lvc_s_layo,
gt_final1 type table of t_Final_out.
DATA: CCCONTAINER1 TYPE SCRFNAME VALUE 'CCCONTAINER1',
CCCONTAINER2 TYPE SCRFNAME VALUE 'CCCONTAINER2',
G_PARENT_TOP TYPE REF TO CL_GUI_CONTAINER ,
G_SPLITTER TYPE REF TO CL_GUI_SPLITTER_CONTAINER,
G_DYNDOC_ID TYPE REF TO CL_DD_DOCUMENT,
G_PARENT_GRID TYPE REF TO CL_GUI_CONTAINER.
Global Variables *
Data :cnt(4) type n value '0',
g_plant type CKMLMV003-WERKS ,
g_QuanTStr type CKMLMV003-MGTYP ,
g_PurchOrg type CKMLMV001-EKORG_ND,
flag type n value '0',
g_cnt6 type n value '0',
g_cnt7 type n value '0',
g_cnt8 type n value '0',
g_cnt9 type n value '0',
g_cnt10 type n value '0',
g_cnt11 type n value '0',
g_cnt12 type n value '0',
g_cnt13 type n value '0'.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-011.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-006 for field s_matnr.
Select-Options : S_MATNR for CKMLMV003-MATNR .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-007 for field S_WERKS.
SELECT-OPTIONS:S_WERKS for CKMLMV003-WERKS Default '2003'.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-008 for field S_GJAHR.
SELECT-OPTIONS:S_GJAHR for CKMLMv003-GJAHR default Sy-DATUM(4) .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) TEXT-009 for field S_PERIO.
SELECT-OPTIONS:S_PERIO for CKMLMV003-PERIO .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(25) TEXT-010 for field P_MGTYP.
Parameters : P_MGTYP type CKMLMV003-MGTYP .
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK b1 .
At Selection-Screen on s_matnr .
Perform Validate_MatNumber.
At Selection-Screen on s_werks .
Perform Validate_CostingPlant.
At Selection-Screen on s_GJAHR .
Perform Validate_FiscalYear.
At Selection-Screen on s_PERIO .
Perform Validate_Period.
At Selection-Screen on p_MGTYP .
Perform Validate_QuantityStrType.
*& Form Validate_MatNumber
text
Form Validate_MatNumber.
DATA l_MATNR TYPE CKMLMV003-MATNR.
IF NOT S_MATNR[] IS INITIAL .
CLEAR L_MATNR.
SELECT single MATNR FROM CKMLMV003
INTO l_MATNR
WHERE MATNR = s_MATNR-LOW or MATNR = s_MATNR-HIGH.
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Material Number'(001).
ENDIF.
ENDIF.
ENDFORM. "Validate_MatNumber
*& Form Validate_CostingPlant
text
Form Validate_CostingPlant.
DATA l_werks TYPE CKMLMV003-WERKS.
IF NOT S_WERKS[] IS INITIAL .
CLEAR L_WERKS.
SELECT single WERKS FROM T001W
INTO l_WERKS
WHERE WERKS = s_WERKS-low or WERKS = s_WERKS-high.
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Costing Plant'(002).
ENDIF.
ENDIF.
ENDFORM. "Validate_CostingPlant
*& Form Validate_FiscalYear
text
Form Validate_FiscalYear.
DATA l_GJAHR TYPE CKMLMV003-GJAHR.
IF NOT S_GJAHR-low IS INITIAL or S_GJAHR-high IS INITIAL.
CLEAR L_GJAHR.
SELECT SINGLE GJAHR FROM CKMLMV003
INTO l_GJAHR
WHERE GJAHR LE sy-DATUM(4) .
IF NOT S_GJAHR-low LE sy-DATUM(4) or S_GJAHR-high LE sy-DATUM(4).
MESSAGE e999 WITH
'Enter a Valid Fiscal year'(003).
ENDIF.
ENDIF.
ENDFORM. "Validate_FiscalYear
*& Form Validate_Period
text
Form Validate_Period.
DATA l_PERIO TYPE CKMLMV003-PERIO.
IF NOT S_PERIO[] IS INITIAL .
CLEAR L_PERIO.
SELECT single PERIO FROM CKMLMV003
INTO l_PERIO
WHERE PERIO GE 1 and PERIO LE 12 .
ENDSELECT.
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Period'(004).
ENDIF.
ENDIF.
ENDFORM. "Validate_Period
*& Form Validate_QuantityStrType
text
Form Validate_QuantityStrType.
DATA l_MGTYP TYPE CKMLMV003-MGTYP.
IF NOT p_MGTYP IS INITIAL.
CLEAR L_MGTYP.
SELECT SINGLE MGTYP FROM CKMLMV003
INTO l_MGTYP
WHERE MGTYP = p_MGTYP .
IF sy-subrc NE 0.
MESSAGE e999 WITH
'Enter a Valid Quantity Structure Type'(005).
ENDIF.
ENDIF.
ENDFORM. "Validate_QuantityStrType
INITIALIZATION of Fields
Class LCL_EVENT_HANDLER DEFINITION.
Public section.
Methods:
TOP_OF_PAGE for Event TOP_OF_PAGE OF CL_GUI_ALV_GRID
IMPORTING E_DYNDOC_ID.
ENDCLASS. "LCL_EVENT_HANDLER DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
METHOD TOP_OF_PAGE.
Top-of-page event <br />
PERFORM EVENT_TOP_OF_PAGE USING G_DYNDOC_ID.
ENDMETHOD. "top_of_page
ENDCLASS. "LCL_EVENT_HANDLER IMPLEMENTATION
Data : G_HANDLER TYPE REF TO LCL_EVENT_HANDLER.
Initialization.
v_repid = sy-repid.
Start-of-Selection.
Perform get_CKMLMV003.
Perform get_CKMLMV001.
Perform Get_Finaldata.
Perform Layout_FieldCatalog.
call screen '101'.
Perform ALVGrid_Final_Display.
*& Form Layout_FieldCatalog
text
Form Layout_FieldCatalog.
s_fieldcatalog-col_pos = 1.
s_fieldcatalog-fieldname = 'MATNR'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-024.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 2.
s_fieldcatalog-fieldname = 'GJAHR'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-012.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 3.
s_fieldcatalog-fieldname = 'PERIO'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-013.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 4.
s_fieldcatalog-fieldname = 'WERKS'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-025.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 5.
s_fieldcatalog-fieldname = 'LIFNR_ND1'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-014.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 6.
s_fieldcatalog-fieldname = 'MISCH_VERH1'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-015.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 7.
s_fieldcatalog-fieldname = 'LIFNR_ND2'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-016.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 8.
s_fieldcatalog-fieldname = 'MISCH_VERH2'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-017.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 9.
s_fieldcatalog-fieldname = 'LIFNR_ND3'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-018.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 10.
s_fieldcatalog-fieldname = 'MISCH_VERH3'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-019.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 11.
s_fieldcatalog-fieldname = 'LIFNR_ND4'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-020.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 12.
s_fieldcatalog-fieldname = 'MISCH_VERH4'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-021.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 13.
s_fieldcatalog-fieldname = 'LIFNR_ND5'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 14.
s_fieldcatalog-fieldname = 'MISCH_VERH5'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
if g_cnt6 <> '0'.
s_fieldcatalog-col_pos = 14.
s_fieldcatalog-fieldname = 'LIFNR_ND6'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 15.
s_fieldcatalog-fieldname = 'MISCH_VERH6'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt7 <> '0'.
s_fieldcatalog-col_pos = 16.
s_fieldcatalog-fieldname = 'LIFNR_ND7'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 17.
s_fieldcatalog-fieldname = 'MISCH_VERH7'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt8 <> '0'.
s_fieldcatalog-col_pos = 18.
s_fieldcatalog-fieldname = 'LIFNR_ND8'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 19.
s_fieldcatalog-fieldname = 'MISCH_VERH8'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt9 <> '0'.
s_fieldcatalog-col_pos = 20.
s_fieldcatalog-fieldname = 'LIFNR_ND9'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 21.
s_fieldcatalog-fieldname = 'MISCH_VERH9'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt10 <> '0'.
s_fieldcatalog-col_pos = 22.
s_fieldcatalog-fieldname = 'LIFNR_ND10'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 23.
s_fieldcatalog-fieldname = 'MISCH_VERH10'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt11 <> '0'.
s_fieldcatalog-col_pos = 24.
s_fieldcatalog-fieldname = 'LIFNR_ND11'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 25.
s_fieldcatalog-fieldname = 'MISCH_VERH11'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt12 <> '0'.
s_fieldcatalog-col_pos = 26.
s_fieldcatalog-fieldname = 'LIFNR_ND12'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 27.
s_fieldcatalog-fieldname = 'MISCH_VERH12'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
if g_cnt13 <> '0'.
s_fieldcatalog-col_pos = 29.
s_fieldcatalog-fieldname = 'LIFNR_ND13'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-022.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
s_fieldcatalog-col_pos = 30.
s_fieldcatalog-fieldname = 'MISCH_VERH13'.
s_fieldcatalog-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
s_fieldcatalog-seltext_l = Text-023.
append s_fieldcatalog to t_fieldcatalog.
clear s_fieldcatalog.
ENDIF.
ENDFORM. "Layout_FieldCatalog
*& Form get_CKMLMV003
text
Form get_CKMLMV003.
Select WERKS
MATNR
MISCH_VERH
KALNR_BAL
GJAHR
PERIO
MGTYP
from CKMLMV003
into table i_CKMLMV003_out
Where ( MATNR in s_MATNR and
WERKS in s_WERKS and
GJAHR in s_GJAHR and
PERIO in s_PERIO and
MGTYP = p_MGTYP ).
Sort i_CKMLMV003_out by MATNR KALNR_BAL.
ENDFORM. "get_CKMLMV003
*& Form get_CKMLMV001
text
Form get_CKMLMV001.
If Not i_CKMLMV003_out is Initial.
Select MATNR
KALNR
LIFNR_ND
EKORG_ND
from CKMLMV001
into Table i_CKMLMV001_out
for all entries in i_CKMLMV003_out
Where ( KALNR = i_CKMLMV003_out-KALNR_BAL
and WERKS = i_CKMLMV003_out-WERKS
and MATNR = i_CKMLMV003_out-MATNR ).
sort i_CKMLMV001_out by MATNR KALNR.
ENDIF.
ENDFORM. "get_CKMLMV001
*& Form Get_Finaldata
text
Form Get_Finaldata.
Loop at i_CKMLMV001_out into i_CKMLMV001_str.
Loop at i_CKMLMV003_out into i_CKMLMV003_str.
If ( i_CKMLMV001_str-KALNR = i_CKMLMV003_str-KALNR_BAL and i_CKMLMV003_str-MATNR = i_CKMLMV001_str-MATNR ) .
If ( flag = 0 ).
g_plant = i_CKMLMV003_str-WERKS.
g_PurchOrg = i_CKMLMV001_str-EKORG_ND.
g_quantstr = i_CKMLMV003_str-MGTYP.
flag = 1.
ENDIF.
Move i_CKMLMV003_str-MATNR to i_Final_str-MATNR.
Move i_CKMLMV003_str-WERKS to i_Final_str-WERKS.
Move i_CKMLMV003_str-GJAHR to i_Final_str-GJAHR.
Move i_CKMLMV003_str-PERIO to i_Final_str-PERIO.
Move i_CKMLMV003_str-MISCH_VERH to i_Final_str-MISCH_VERH1.
Move i_CKMLMV001_str-LIFNR_ND to i_Final_str-LIFNR_ND1.
Move-Corresponding i_CKMLMV003_str to i_CKMLMV003_temp.
Append i_Final_str to i_Final_out.
Clear : i_CKMLMV003_str .
ENDIF.
ENDLOOP.
Clear : i_CKMLMV001_str , i_Final_str , i_CKMLMV003_temp.
ENDLOOP.
Sort i_Final_out by WERKS MATNR GJAHR PERIO .
Loop at i_Final_out into i_Final_str.
if i_Final_str-MATNR = i_Final_str1-MATNR and i_Final_str-GJAHR = i_Final_str1-GJAHR and i_Final_str-PERIO = i_Final_str1-PERIO and i_Final_str-WERKS = i_Final_str1-WERKS.
cnt = cnt + 1.
Case cnt.
When 2.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH2.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND2.
When 3.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH3.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND3.
When 4.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH4.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND4.
When 5.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH5.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND5.
When 6.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH6.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND6.
g_cnt6 = 1.
When 7.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH7.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND7.
g_cnt7 = 1.
When 8.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH8.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND8.
g_cnt8 = 1.
When 9.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH9.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND9.
g_cnt9 = 1.
When 10.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH10.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND10.
g_cnt10 = 1.
When 11.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH11.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND11.
g_cnt11 = 1.
When 12.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH12.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND12.
g_cnt12 = 1.
When 13.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH13.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND13.
g_cnt13 = 1.
ENDCASE.
ELSE.
if cnt GE 1 .
append i_Final_str1 to i_Final_out1.
Clear : i_Final_str1.
ENDIF.
Move-Corresponding i_Final_str to i_Final_str1.
cnt = 0.
cnt = cnt + 1.
ENDIF.
Clear : i_Final_str.
Endloop.
append i_Final_str1 to i_Final_out1.
if i_Final_str-MATNR = i_Final_str1-MATNR and i_Final_str-GJAHR = i_Final_str1-GJAHR and i_Final_str-PERIO = i_Final_str1-PERIO .
cnt = cnt + 1.
Case cnt.
When 2.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH2.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND2.
When 3.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH3.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND3.
When 4.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH4.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND4.
When 5.
Move i_Final_str-MISCH_VERH1 to i_Final_str1-MISCH_VERH5.
Move i_Final_str-LIFNR_ND1 to i_Final_str1-LIFNR_ND5.
ENDCASE.
**Move-Corresponding i_Final_str to i_Final_str1.
ELSE.
if cnt GE 1 .
append i_Final_str1 to i_Final_out1.
Clear : i_Final_str1.
ENDIF.
Move-Corresponding i_Final_str to i_Final_str1.
cnt = 0.
cnt = cnt + 1.
ENDIF.
Clear : i_Final_str.
Endloop.
append i_Final_str1 to i_Final_out1.
ENDFORM. "Get_Finaldata
*& Form top_of_page
text
Form top_of_page.
clear t_header.
refresh t_header.
i_header_str-typ = 'H'.
I_header_Str-info = Text-035.
append I_header_str to t_header.
clear I_header_str.
Date
I_header_str-typ = 'S'.
I_header_str-key = Text-036.
CONCATENATE sy-datum+6(2) '.'
sy-datum+4(2) '.'
sy-datum(4) INTO I_header_str-info. "todays date
append I_header_str to t_header.
clear: I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Quantity Structure Type :'.
I_header_Str-info = g_QuantStr.
append I_header_str to t_header.
clear I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Purchase Org :'.
I_header_Str-info = g_PurchOrg.
append I_header_str to t_header.
clear I_header_str.
i_header_str-typ = 'S'.
I_header_Str-Key = 'Plant :'.
I_header_Str-info = g_Plant.
append I_header_str to t_header.
clear I_header_str.
CLEAR i_line_event_str.
i_line_event_str-name = 'TOP_OF_PAGE'.
APPEND i_line_event_str TO i_events.
call function 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header.
i_logo = 'Z_LOGO'.
ENDFORM. "top_of_page
*& ALVGrid_Final_Display
Form ALVGrid_Final_Display.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = v_repid
i_DEFAULt = c_valx
i_callback_top_of_page = 'TOP_OF_PAGE'
i_Save = c_valx
it_fieldcat = t_fieldcatalog
it_sort = t_sort
it_events = I_events
TABLES
t_outtab = i_final_out1.
ENDFORM. "ALVGrid_Final_Display
*& Form ALVGRID_OO_Display
text
Form ALVGRID_OO_Display.
i_FCAT_str-col_pos = 1.
i_FCAT_str-fieldname = 'MATNR'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-seltext = 'MATERIAL'.
i_fcat_str-scrtext_m = Text-024.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 2.
i_FCAT_str-fieldname = 'GJAHR'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-012.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 3.
i_FCAT_str-fieldname = 'PERIO'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-013.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 4.
i_FCAT_str-fieldname = 'WERKS'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-025.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 5.
i_FCAT_str-fieldname = 'LIFNR_ND1'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_fcat_str-scrtext_m = Text-014.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 6.
i_FCAT_str-fieldname = 'MISCH_VERH1'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-015.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 7.
i_FCAT_str-fieldname = 'LIFNR_ND2'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-016.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 8.
i_FCAT_str-fieldname = 'MISCH_VERH2'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-017.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 9.
i_FCAT_str-fieldname = 'LIFNR_ND3'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-018.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 10.
i_FCAT_str-fieldname = 'MISCH_VERH3'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-019.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 11.
i_FCAT_str-fieldname = 'LIFNR_ND4'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-020.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 12.
i_FCAT_str-fieldname = 'MISCH_VERH4'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-021.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 13.
i_FCAT_str-fieldname = 'LIFNR_ND5'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-022.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 14.
i_FCAT_str-fieldname = 'MISCH_VERH5'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
i_FCAT_str-scrtext_m = Text-023.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
if g_cnt6 <> '0'.
i_FCAT_str-col_pos = 15.
i_FCAT_str-fieldname = 'LIFNR_ND6'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
i_FCAT_str-scrtext_m = Text-022.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
i_FCAT_str-col_pos = 16.
i_FCAT_str-fieldname = 'MISCH_VERH6'.
i_FCAT_str-tabname = 'I_FINAL_OUT1'.
s_fieldcatalog-NO_OUT = 'X'.
i_FCAT_str-scrtext_m = Text-023.
append i_FCAT_str to i_FCAT.
clear i_FCAT_str.
ENDIF.
*if not grid1 is Initial.
If sy-SUBRC = 0.
Call Method grid1->set_table_for_first_display
CHANGING
it_outtab = i_final_out1[]
it_fieldcatalog = I_FCAT
EXCEPTIONS
Invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
Others = 4.
If sy-subrc <> 0.
ENDIF.
CALL METHOD G_DYNDOC_ID->INITIALIZE_DOCUMENT
EXPORTING
BACKGROUND_COLOR = CL_DD_AREA=>COL_TEXTAREA.
Processing events <br />
CALL METHOD GRID1->LIST_PROCESSING_EVENTS
EXPORTING
I_EVENT_NAME = 'TOP_OF_PAGE'
I_DYNDOC_ID = G_DYNDOC_ID.
Call Method grid2->set_table_for_first_display
CHANGING
it_outtab = i_final_out1[]
it_fieldcatalog = I_FCAT
EXCEPTIONS
Invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
Others = 4.
If sy-subrc <> 0.
ENDIF.
ENDIF.
ENDIF.
Endform. "ALVGRID_OO_Display
Form EVENT_TOP_OF_PAGE using DG_DYNDOC_ID
TYPE REF TO CL_DD_DOCUMENT.
DATA : DL_TEXT(255) TYPE C.
CALL METHOD DG_DYNDOC_ID->ADD_TEXT
EXPORTING
TEXT = 'Flight Details'
SAP_STYLE = CL_DD_AREA=>HEADING
SAP_FONTSIZE = CL_DD_AREA=>LARGE
SAP_COLOR = CL_DD_AREA=>LIST_HEADING_INT.
Endform.
*& Module STATUS_0101 OUTPUT
text
MODULE STATUS_0101 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
SET PF-STATUS 'STATUS'.
SET TITLEBAR 'TITLE'.
Create Object G_DYNDOC_ID
EXPORTING STYLE = 'ALV_GRID'.
if g_custom_container1 is initial .
create object g_custom_container1
Exporting
Container_name = CCCONTAINER1
Exceptions
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
Others = 5.
Create Object G_SPLITTER
Exporting PARENT = g_custom_container1.
CALL METHOD G_SPLITTER->GET_CONTAINER
EXPORTING
ROW = 1
COLUMN = 1
RECEIVING
CONTAINER = G_PARENT_TOP.
*Assigning the Part 2 to GRID
CALL METHOD G_SPLITTER->GET_CONTAINER
EXPORTING
ROW = 2
COLUMN = 1
RECEIVING
CONTAINER = g_parent_grid.Hi,
Check if any event is triggered from the event handler class, upon selection.
Usually, the events are handled on double click or on hotspot etc.
Regards,
Satish Kanteti -
Header in alv grid using class
Hello All,
I developed alv grid using class method.
First I created CREATE OBJECT GR_CCONTAINER
then CREATE OBJECT GR_ALVGRID
then PERFORM FIELD_CATALOG TABLES GT_FIELDCAT----
for field catalog
PERFORM LAYOUT CHANGING GS_LAYOUT.----
for header
p_gs_layout-grid_title = 'class method'.
p_gs_layout-sel_mode = 'D'.
APPEND P_GS_LAYOUT TO IT_LAYOUT.
and finally CALL METHOD GR_ALVGRID->SET_TABLE_FOR_FIRST_DISPLAY
the report is cooming fine but in header it comes only "class method".
but i need also
1. reporting date
2. reporting time.
can any body tell me how i can i put 2 more heading line
Thanks,
RakeshHi Dude,
Please refer the below link how to handle the header in alv using abap oo
https://www.sdn.sap.com/irj/scn/wiki?path=/display/snippets/abapObjects-ALVModel-UsingHeaderand+Footer
Hope it clears,..............
Thanks & Regards
Ramakrishna Pathi -
Can we call ALV grid in a method?
hello everybody,
Is it possible to display the output in ALV from a <b>class-method(Global class)</b>?
in a class-method wee cannot call a screen, so is there any other possibility to display the grid??
thanx in advance,
abhilash.Don't USE ALV Function modules wherever possible. Go OO --it's simple once you get the hang of it.
Of course you can do it.
Here's a general class including an event handler in the SAME class. This can be used for DYNAMIC tables, DYNAMIC FCATS and custom events. The method DISPLAY_GRID here will do what you want.
Your structure list and fcat data are in the field-symbols <fs1> and <fs2>
Here's the code. This program just reads 200 lines from KNA1 and displays some data in a GRID with a toolbar. Press the EXIT arror to quit the program.
You need to define a blank screen (SE51) with a custom control on it called CCONTAINER1.
The screen logic as follows
PBO.
MODULE status_0100 OUTPUT.
You don't need a PAI as we are using the toolbar with events.
OK here goes.
The CLASS bit first
FIELD-SYMBOLS :
<fs1> TYPE ANY,
<fs2> TYPE STANDARD TABLE,
<dyn_table> TYPE STANDARD TABLE,
<dyn_field>,
<dyn_wa>.
CLASS zcl_dog DEFINITION.
PUBLIC SECTION.
METHODS:
constructor
IMPORTING z_object type ref to zcl_dog,
return_structure,
create_dynamic_fcat
EXPORTING it_fldcat TYPE lvc_t_fcat,
display_grid
CHANGING it_fldcat type lvc_t_fcat,
on_user_command FOR EVENT before_user_command OF cl_gui_alv_grid
IMPORTING e_ucomm
sender,
on_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object
e_interactive.
PRIVATE SECTION.
DATA:
lr_rtti_struc TYPE REF TO cl_abap_structdescr, "RTTI
zog LIKE LINE OF lr_rtti_struc->components, "RTTI
wa_it_fldcat TYPE lvc_s_fcat,
grid_container1 TYPE REF TO cl_gui_custom_container,
grid1 TYPE REF TO cl_gui_alv_grid.
TYPES:
struc LIKE zog.
DATA:
zogt TYPE TABLE OF struc.
ENDCLASS.
CLASS zcl_dog IMPLEMENTATION.
METHOD constructor.
CREATE OBJECT grid_container1
EXPORTING
container_name = 'CCONTAINER1'.
CREATE OBJECT grid1
EXPORTING i_parent = grid_container1.
SET HANDLER z_object->on_user_command for grid1.
SET HANDLER z_object->on_toolbar for grid1.
ENDMETHOD.
METHOD return_structure.
lr_rtti_struc ?= cl_abap_structdescr=>DESCRIBE_BY_DATA( <fs1> ).
zogt[] = lr_rtti_struc->components.
ASSIGN zogt[] TO <fs2>.
ENDMETHOD.
METHOD create_dynamic_fcat.
LOOP AT <fs2> INTO zog.
CLEAR wa_it_fldcat.
wa_it_fldcat-fieldname = zog-name .
wa_it_fldcat-datatype = zog-type_kind.
wa_it_fldcat-inttype = zog-type_kind.
wa_it_fldcat-intlen = zog-length.
wa_it_fldcat-decimals = zog-decimals.
wa_it_fldcat-coltext = zog-name.
wa_it_fldcat-lowercase = 'X'.
APPEND wa_it_fldcat TO it_fldcat .
ENDLOOP.
ENDMETHOD.
METHOD display_grid.
CALL METHOD grid1->set_table_for_first_display
CHANGING
it_outtab = <dyn_table>
it_fieldcatalog = it_fldcat.
ENDMETHOD.
METHOD on_user_command.
CASE e_ucomm.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'SAVE'.
ENDCASE.
ENDMETHOD. "on_user_command
METHOD on_toolbar.
DATA: ls_toolbar TYPE stb_button.
CLEAR ls_toolbar.
MOVE 0 TO ls_toolbar-butn_type.
MOVE 'EXIT' TO ls_toolbar-function.
MOVE SPACE TO ls_toolbar-disabled.
MOVE icon_system_end TO ls_toolbar-icon.
MOVE 'Click2Exit' TO ls_toolbar-quickinfo.
APPEND ls_toolbar TO e_object->mt_toolbar.
CLEAR ls_toolbar.
MOVE 0 TO ls_toolbar-butn_type.
MOVE 'SAVE' TO ls_toolbar-function.
MOVE SPACE TO ls_toolbar-disabled.
MOVE icon_system_save TO ls_toolbar-icon.
MOVE 'Save data' TO ls_toolbar-quickinfo.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
ENDCLASS.
Now the program is incredibly simple and will work for almost ANY table with just a call to the methods in the class . Saves Zillions of coding different ABAPS.
start of program data to demo use of above class ************
INCLUDE <icon>.
TABLES : kna1.
TYPES: BEGIN OF s_elements,
kunnr TYPE kna1-kunnr,
name1 TYPE kna1-name1,
stras TYPE kna1-stras,
telf1 TYPE kna1-telf1,
ort01 TYPE kna1-ort01,
pstlz TYPE kna1-pstlz,
END OF s_elements.
DATA: z_object type ref to zcl_dog, "Instantiate our class
t_elements TYPE TABLE OF s_elements, "refers to our ITAB
wa_elements TYPE s_elements,
wa_dyn_table_line TYPE REF TO DATA,
it_fldcat TYPE lvc_t_fcat,
new_table TYPE REF TO DATA,
dy_table TYPE REF TO data,
dy_line TYPE REF TO data.
START-OF-SELECTION.
CALL SCREEN 100.
END-OF-SELECTION..
MODULE status_0100 OUTPUT.
ASSIGN wa_elements TO <fs1>.
*Instantiate our zcl_dog class
CREATE OBJECT
z_object
EXPORTING
z_object = z_object.
Get structure of your ITAB
CALL METHOD z_object->return_structure.
build fcat.
CALL METHOD z_object->create_dynamic_fcat
IMPORTING
it_fldcat = it_fldcat.
build dynamic table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fldcat
IMPORTING
ep_table = dy_table.
ASSIGN dy_table->* TO <dyn_table>.
Create dynamic work area and assign to FS
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
fill it
PERFORM populate_dynamic_itab.
Display ALV grid with our EXIT tool button
CALL METHOD z_object->display_grid
CHANGING it_fldcat = it_fldcat.
ENDMODULE.
MODULE user_command_0100 INPUT.
PAI not needed as we are using EVENTS
ENDMODULE.
FORM populate_dynamic_itab.
just read 200 lines as a demo from KNA1
assign dynamic table created to <field symbol> so you can fill it
with data. Table also now acessible to methods in the classes
defined in this program.
SELECT kunnr name1 stras telf1 ort01 pstlz
UP TO 200 rows
FROM kna1
INTO CORRESPONDING FIELDS OF TABLE <dyn_table>.
ENDFORM.
If you save the class with SE24 you can see all you need to do in the program is
1) Define your data
2) Instantiate the class
CREATE OBJECT
z_object
EXPORTING
z_object = z_object.
3) Get structure of your ITAB (can be ANY itab including deep structures)
CALL METHOD z_object->return_structure.
4) build your FCAT automatically using the structure returned from 3).
CALL METHOD z_object->create_dynamic_fcat
IMPORTING
it_fldcat = it_fldcat.
5) build dynamic table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fldcat
IMPORTING
ep_table = dy_table.
6) * Create dynamic work area and assign to FS
ASSIGN dy_table->* TO <dyn_table>.
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
7) Fill it
PERFORM populate_dynamic_itab.
8) Now display Display ALV grid with our EXIT tool button
CALL METHOD z_object->display_grid
CHANGING it_fldcat = it_fldcat.
If you look in the method display_grid you'll see that the method can call ALV classes and functions.
Isn't the above much easier than messing around with obsolete function modules --and you can write virtually the same code for ANY table. You can also in the events add eitable functions etc.
In fact we could even make it simpler.
I'll try and post the code later but in fact we could get the CLASS to do almost the entire thing so the only statements you would actually need in your ABAP would be
Your Data
Instantiate the class.
Call the class with a new method to do all the coding up to generating the ITAB.
Populate your Itab
call the method to display your ITAB.
So your new abap would basically just have DATA, your ITAB structure, 2 method calls and a proceedure to fill your ITAB.
(Now your Boss won't take any excuses if it takes you longer than 20 Mins to code an ABAP containing even a complex table display. !!!!).
Cheers
Jimbo -
Sub total in ALV GRID using oops concept
Hi,
If Plant (VBAP-WERKS) is not the same for all items on a Sales Order (VBAK-VBELN is the same for al items) then create a separate line on the report for each different plant specified in the line items. Copy all fields from the original order line except for plant and Net Value. Net Value should be the total of item Net Values for all items with the same plant in the order.
Example:
Data:
Order---- Item- Plant- Net Value---
123---- 010- 3467- 100.00---
123---- 020- 7865- 50.00---
123---- 030- 3467- 80.50---
Report:
Order- Plant- Net Value---
123- 3467- 180.50---
123- 7865- 50.00----
I need to dispaly the Report format in ALV Grid using oops concept...
no need of calling any function modules.
Regards,
NithyaHi
Here is example code
This is the method to be called:
get_subtotals
Use
Returns the current subtotals of the ALV Grid Control. Having created totals for at least one column, users can calculate at most nine subtotals. The list is sorted by the values of one or several columns (called the subtotals column). If a value is changed in the subtotals column, the subtotal is displayed (this is also referred to as control level change).
Integration
Before you access the subtotals value, you use the method get_sort_criteria to get the sort table . One row of this table describes properties of a column in the output table.
If the field SUBTOT is set for a column in this table, the column is a subtotals column.
The field SPOS then indicates at which level (see below) the subtotal has been calculated.
The field FIELDNAME contains the name of the subtotals column in the output table.
Based on this information, you specifically access the values of the tables passed (using reference variables COLLECT01 to COLLECT09).
Features
CALL METHOD <ref. var. to CL_GUI_ALV_GRID>->get_subtotals
IMPORTING
EP_COLLECT00 = <reference variable of type REF TO DATA>
EP_COLLECT01 = <reference variable of type REF TO DATA>
EP_COLLECT02 = <reference variable of type REF TO DATA>
EP_COLLECT03 = <reference variable of type REF TO DATA>
EP_COLLECT04 = <reference variable of type REF TO DATA>
EP_COLLECT05 = <reference variable of type REF TO DATA>
EP_COLLECT06 = <reference variable of type REF TO DATA>
EP_COLLECT07 = <reference variable of type REF TO DATA>
EP_COLLECT08 = <reference variable of type REF TO DATA>
EP_COLLECT09 = <reference variable of type REF TO DATA>
ET_GROUPLEVELS = <ínternal table of type LVC_T_GRPL>.
In order to access the values of EP_COLLECT00 to EP_COLLECT09, you use ASSIGN to dereference the relevant reference variable in a field symbol of your output table type (see below).
Parameters
Meaning
EP_COLLECT00
Points to the totals line. Since there is only one totals line which, in addition, has a unique totalling area, no further information is available for this table in table ET_GROUPLEVELS.
get_subtotals
EP_COLLECT01 to EP_COLLECT09
Point to the subtotals line. For each subtotals level, there is one reference variable. Each of these variables points to an internal table that has the type of the output table. EP_COLLECT01 points to the subtotal at the hightest level, while EP_COLLECT02 points to the subtotal at the second highest level, and so on. The levels are derived from the sort priority (field SPOS in the sort table ). The column by which the data was sorted first, is the highest subtotals level.
ET_GROUPLEVELS
Manages all indexes for the individual control levels. The fields of the table have the following meaning:
INDEX_FROM, INDEX_TO: Rows of the output table for which the subtotal was created
LEVEL: Subtotals level (see above)
COUNTER: Number of rows for which the subtotal was created
COMPRESS: For this subtotals line, the user has hidden the associated rows.
COLLECT: Indicates the subtotals table (01-09) in which the values are stored
For an overview, see Methods of Class CL_GUI_ALV_GRID
Activities -
ALV GRID Using oo abap example
Hi Friends,
I am new to oo abap, Can any one give me a basic example how i can create alv grid in oo abap.
regards,
DVNSHI,
Programming for ALV grid display using the classes involves creation of a screen and calling it for display.
Since there has to be a linking between the program and the screen we have created , this comes in the form of a container. We use two important classes during the programming for displaying ALV grid, CL_GUI_ALV_GRID and CL_GUI_CUSTOM_CONTAINER.
Steps To Use ALV Grid in a Program
1. Declare reference variables for,
Container (class CL_GUI_CUSTOM_CONTAINER) and
Grid (class CL_GUI_ALV_GRID)
Example
DATA: grid TYPE REF TO cl_gui_alv_grid,
custom_container TYPE REF TO cl_gui_custom_container
2. Create Standard Screen and a container on that screen and give a name to that container ( Use custom control button from tool bar) . This name will be used to link the container we have created on the screen with the object reference of class CL_GUI_CUSTOM_CONTAINER, which we have declared in the first step
3. Call the screen which has been created
4. Instantiate the container control and the ALV Grid Control in PBO of the screen.
Example
IF custom_container IS INITIAL.
CREATE OBJECT custom_container
EXPORTING
CONTAINER_NAME = MY_CONTAINER'.
CREATE OBJECT grid
EXPORTING
I_PARENT = custom_container.
ENDIF
5. For displaying the data, call the method set_table_for_first_display of object reference of CL_GUI_ALV_GRID.
Example
CALL METHOD grid->set_table_for_first_display
EXPORTING
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT =
IS_LAYOUT =
IS_PRINT =
IT_SPECIAL_GROUPS =
IT_TOOLBAR_EXCLUDING =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
IT_OUTTAB =
IT_FIELDCATALOG =
IT_SORT =
IT_FILTER =
EXCEPTION
INVALID_PARAMETER_COMBINATION =
PROGRAM_ERROR =
TOO_MANY_LINES =
others =
EXPLANATION OF SOME IMPORTANT PARAMETERS.
I_BYPASSING_BUFFER & I_BUFFER_ACTIVE :
When the program is run for the first time, the fields present in the output table and their positions are stored in a buffer. So the buffer is taken as reference for the successive executions. In order to bypass this buffer the above parameter values should be X and (space) respectively. If these values are not passed to the function module, the changes made in the structure of the internal table will not be reflected in the output.
I_STRUCTURE_NAME:
If the structure of your output table corresponds to a structure stored in the Data Dictionary (DDIC), the ALV Grid Control can use this information to generate the field catalog automatically. Pass the table structure as parameter. In this case, all fields of this DDIC structure are displayed in the list.
IS_VARIANT :
It allows the user to save and reuse the layout. It is a structure of type DISVARIANT and contain the display variant name. It facilitates pre-assignment for a layout, rather than displaying report and then choosing displaying variant.
I_SAVE:
This single character variable specifies whether the user specific display variants can be saved or not.
The I_SAVE "Options for saving layouts" parameter can have the following values:
U Only user specific layouts can be saved
X Only global layouts can be saved
A Both user specific and global layouts can be saved
Space Layouts can not be saved
IS_LAYOUT:
This structure of type LVC_S_LAYO
is used to control the layout of the ALV. Two important fields are:
GRID TITLE. : Title of grid
ZEBRA : Alternate lines in list are displayed in different colors.
IT_FIELDCATALOG:
This internal table of type LVC_T_FCAT
is used to specify the position of various fields in the report itab.
There are three ways we can fill the field catalog table
1. Automatically through data dictionary structure (DDIC). In this case we pass the table structure to I_STRUCTURE_NAME.
2. Manually in ABAP program. Filling the internal table of type LVC_T_FCAT
1. . With each row corresponding to each column of output table. Each row of this table will hold value like
i). TABNAME & FIELDNAME specifies the reference fields for F1 help
ii). CTABNAME & CFIELDNAME specifies the reference fields for currency formatting
iii). QTABNAME & QFIELDNAME specifies the reference fields for quantity formatting
iv). SELTEXT_L holds the long description of the field
v). SELTEXT_M holds the medium description of the field
vi). SELTEXT_S holds the small description of the field
vii). KEY specifies the Key field ( cannot be hidden )
viii). OUTPUTLEN species the output length of the field
ix). DO_SUM specifies that subtotal is required on this field
x). NO_OUT specifies a hidden field
3. Semi-Automatically by combining the above 2 procedures.
Call function Module REUSE_ALV_FIELDCATALOG_MERGE and pass DDIC
structure or the output table to generate the field catalog.
Add additional Rows or modify existing properties of the fields to be displayed.
METHODS OF IMPLEMENTING SOME EXTRA FEATURES
Set focus to the grid
After CALL METHODgrid->set_table_for_first_display insert the following stament:
CALL METHOD cl_gui_control=>set_focus EXPORTING control = grid
Refresh grid display
Use the grid method REFRESH_TABLE_DISPLAY
Example:
CALL METHOD grid->refresh_table_display.
Set the title of the grid
Fill the grid_title field of structure lvc_s_layo.
DATA:
gs_layout TYPE lvc_s_layo.
gs_layout-grid_title = 'TITLE'.
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'structure name'
is_layout = gs_layout
CHANGING it_outtab = Output table.
The structure lvc_s_layo contains fields for setting graphical properties, displaying exceptions, calculating totals and enabling specific interaction options
Event Handling
We can handle the events triggered by
1. User defined Text Output
2. Mouse-controlled Actions
3. Self-defined and Standard Functions
Steps for Event Handling
1. Define a (local) class for event handling
2. Define a method for each event you need to handle
3. Implement your event handler methods.
4. Create Object of the above class
5. Link used events and event handler methods of the receiver object and the grid
object.
Example program : Handling Double Click Event
Step1.Define a class.
class lcl_my_event_receiver definition.
public section.
methods:
handle_double_click
for event double_click of cl_gui_alv_grid.
endclass.
Step 2. Implement the class
class lcl_my_event_receiver implementation.
method handle_double_click.
message i001(zz) with ' double click event - Triggerd '.
endmethod.
endclass.
Step 3. Declare and create Object for the local class defined and implemented in steps 1 and 2 respectively
o_receiver TYPE REF TO lcl_my_event_receiver (Declaration)
create object o_receiver. (Instantiation)
Step 4. Link the method for handling the event with the grid object in the PBO of screen after instantiating the grid object
set handler o_receiver->handle_double_click for grid.
EXAMPLE PROGRAM TO CHANGE A CLASSICAL REPORT OUTPUT TO A ALV GRID
This can be used as a template program to convert a classical report layout to a ALV grid.
Report<Report name>
Grid data Declarations----------------------------------------------*
INCLUDE ZVINALVD.
Internal table for ALV grid
TYPES: BEGIN OF T_ALV,
Field1 like table-field1,
Field2 like table-field2,
END OF T_ALV.
DATA: I_ALV TYPE TABLE OF T_ALV.
DATA: WA_ALV TYPE T_ALV.
-Class declarations----
INCLUDE ZVINALVE.
Add a checkbox in selection screen for ALV grid display. If it is unchecked
output will be of classical type.
SELECTION-SCREEN BEGIN OF BLOCK box01.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN: COMMENT 4(30) To display repot output as a ALV grid.
PARAMETERS: p_alv AS CHECKBOX.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK box01.
START-OF-SELECTION.
Fill the ALV grid internal table
END-OF-SELECTION.
IF P_ALV = X.
PERFORM ALV_DISPLAY.
ELSE.
PERFORM CLASSICAL_DISPLAY.
ENDIF.
Alv Display
FORM ALV_DISPLAY.
CALL SCREEN 100.
ENDFORM.
Module STATUS_0100 OUTPUT
PBO for ALV Grid
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'GRID_DISPLAY'.
DATA:
For parameter IS_VARIANT that is used to set up options for storing
the grid layout as a variant in method set_table_for_first_display
l_layout TYPE disvariant.
GS_LAYOUT-SEL_MODE = 'B'.
Optimize column width
GS_LAYOUT-CWIDTH_OPT = 'X'.
Read data and create objects
IF go_custom_container IS INITIAL.
Create objects for container and ALV grid
CREATE OBJECT go_custom_container
EXPORTING container_name = 'ALV_CONTAINER'.
CREATE OBJECT go_grid
EXPORTING i_parent = go_custom_container.
Create object for event_receiver class
and set handlers
CREATE OBJECT o_event_receiver.
SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
Layout (Variant) for ALV grid
l_layout-report = sy-repid. "Layout to report
To built fieldcatalog
PERFORM alv_build_fieldcatalog.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
EXPORTING
is_variant = l_layout
i_save = 'A'
is_layout = gs_layout
CHANGING it_outtab = I_ALV
it_fieldcatalog = fieldcat.
Raise event toolbar to show the modified toolbar
CALL METHOD go_grid->set_toolbar_interactive.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
Form ALV_BUILD_FIELDCATALOG.
Store contents of selected line in a internal table
FORM alv_build_fieldcatalog.
CLEAR afield.
afield-fieldname = 'FIELD1'.
afield-tabname = 'I_ALV'.
afield-coltext = Field Name 1.
afield-lzero = ' '.
afield-key = 'X'.
afield-outputlen = XX.
APPEND afield TO fieldcat.
CLEAR afield.
afield-fieldname = 'FIELD2'.
afield-tabname = 'I_ALV'.
afield-coltext = Field Name 2.
APPEND afield TO fieldcat.
ENDFORM. " alv_build_fieldcatalog
Module USER_COMMAND_0100 INPUT
PAI for ALV Grid
MODULE USER_COMMAND_0100 INPUT.
CASE OK_100.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
WHEN 'EXIT'.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
Form SELECT_LINE
Store contents of selected line in a internal table
FORM SELECT_LINE.
DATA:l_lines TYPE i.
REFRESH gi_index_rows.
CLEAR g_selected_row.
Read index of selected rows
CALL METHOD go_grid->get_selected_rows
IMPORTING et_index_rows = gi_index_rows.
Check if any row are selected at all. If not
table gi_index_rows will be empty
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
textline1 = 'You must choose a line'.
EXIT.
ENDIF.
Read indexes of selected rows.
LOOP AT gi_index_rows INTO g_selected_row.
IF sy-tabix = 1.
READ TABLE I_ALV INDEX g_selected_row-index INTO
WA_ALV.
ENDIF.
ENDLOOP.
ENDFORM. " SELECT_LINE
Includes:
1. ZVINALVD for data declarations
INCLUDE ZVINALVD .
Type pool for icons - used in the toolbar
TYPE-POOLS: icon.
To allow the declaration of o_event_receiver before the
lcl_event_receiver class is defined, decale it as deferred in the
start of the program
CLASS lcl_event_receiver DEFINITION DEFERRED.
GLOBAL DATA FOR ALV GRID
DATA:
OK code for alv grid screen
OK_100(4) TYPE C,
ALV control: Layout structure
gs_layout TYPE lvc_s_layo,
Declare reference variables to the ALV grid and the container
go_grid TYPE REF TO cl_gui_alv_grid,
go_custom_container TYPE REF TO cl_gui_custom_container,
o_event_receiver TYPE REF TO lcl_event_receiver,
Data for storing information about selected rows in the grid
Internal table
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
fieldcatalog
DATA: fieldcat TYPE LVC_T_FCAT,
afield TYPE LVC_S_FCAT.
2. ZVINALVE for Class/object declarations
INCLUDE ZVINALVE.
C L A S S E S
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object e_interactive,
handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
Event handler method for event toolbar.
CONSTANTS:
Constants for button type
c_button_normal TYPE i VALUE 0,
c_menu_and_default_button TYPE i VALUE 1,
c_menu TYPE i VALUE 2,
c_separator TYPE i VALUE 3,
c_radio_button TYPE i VALUE 4,
c_checkbox TYPE i VALUE 5,
c_menu_entry TYPE i VALUE 6.
DATA: ls_toolbar TYPE stb_button.
Append seperator to the normal toolbar
CLEAR ls_toolbar.
MOVE c_separator TO ls_toolbar-butn_type..
APPEND ls_toolbar TO e_object->mt_toolbar.
Append a new button that to the toolbar. Use E_OBJECT of
event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
This class has one attribute MT_TOOLBAR which is of table type
TTB_BUTTON. The structure is STB_BUTTON
CLEAR ls_toolbar.
MOVE 'DISPLAY' TO ls_toolbar-function.
MOVE icon_DISPLAY TO ls_toolbar-icon.
MOVE 'Displaying customer' TO ls_toolbar-quickinfo.
MOVE 'Display' TO ls_toolbar-text.
MOVE ' ' TO ls_toolbar-disabled.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
METHOD handle_user_command.
Handle own functions defined in the toolbar
CASE e_ucomm.
WHEN 'DISPLAY'.
PERFORM SELECT_LINE.
ENDCASE.
ENDMETHOD.
Reward if useful -
Possible to have vertical scroll bar for a cell in ALV Grid (using methods)
Hi All,
I have a field with length 100 characters on a ALV Grid (using methods)..User doesn't want to scroll all the 100 characters horizontally to see the whole text rather he wants to have a vertical scroll bar for the cell so that he can scroll vertically.
Is it possible to have split the cell text into lines and have a vertical scroll bar for a cell in ALV Grid?
Regards
Jaker.Thanks for the suggestion Balu.I tried this , but while scrolling,headers also getting scrolled.
Becoz of this , if i scroll down to the last row,headers are getting hidden.
Headers should always be static.only the data should scroll.
Since h:datatable is being rendered as one table , i can div tag for this table alone.
If i have seperate datatable for headers alone i can do this .But i should not use two datatables. -
ALV grid using methods: how to get modified cells
Hi all,
IAM USING alv grid using methods,
i have few fields as editable
if the user edits any of those fields how can i know which cell is modified and what is the new value.
i tried to use method get_modified_cells
but iam getting a msg saying protected method and u can not use.
please advise.
thanks
JAfarJafar,
You need to Take the Help of DATA_CHANGED event, when ever there is a change in the Grid, it will trigger, here you can capture the Cells which are modified.
in your PAI call the method check changed data
CL_GUI_ALV_GRID-->CHECK_CHANGED_DATA
You need to set the handler for datachanged.
set the handler for this, and register the event modified or enter.
**Handler to Check the Data Change
HANDLE_DATA_CHANGED FOR EVENT DATA_CHANGED
OF CL_GUI_ALV_GRID
IMPORTING ER_DATA_CHANGED
E_ONF4
E_ONF4_BEFORE
E_ONF4_AFTER,
**Handle Data Change
METHOD HANDLE_DATA_CHANGED.
DATA: X_CHANGE TYPE LVC_S_MODI. "modified cells
LOOP AT ER_DATA_CHANGED->MT_GOOD_CELLS INTO X_CHANGE.
ENDLOOP.
ENDMETHOD. "HANDLE_DATA_CHANGED
Regards
Vijay
Maybe you are looking for
-
Purpose of account determination in Sales Order
Hi My question is whether account determination happens at Sales Order level and if yes what is the purpose. Since I saw account determination procedure only to be assigned at billing document type but not in sales document type.
-
How can I rematch a song? iTunes Match keeps matches my music to clean versions.
I've noticed that within albums that I've bought on Amazon and imported into iTunes Match, the service will match single tracks or entire albums to the clean version. Is there a way to remove a song from iTunes Match, then re-match it or tag it so it
-
How to upload html file to email
Hi, I have absolutely no html background but was able to come up with a single page layout with graphics, texts and links with the help of online tutorials using Adobe Go Live which I can open the file now in Dreamweaver. My goal is not to come up wi
-
Apple TV Streaming iPhoto Slideshow/Streaming Music Playlist
For some reason my Apple TV lists Photo-Settings-Music>Off and I can't change it. I have a Music Playlist selected in iPhoto Slideshow settings on my iMac that I stream from but I'm getting no music when streaming photos to Apple TV. I thought the Ap
-
All my recording modes have greyed out, as the attached screen shot, so I cannt change options. I seem to be stuck in Demo mode. Any ideas what I have done wrong? Noel England