Reg: Certain Open Items are not showing in open item clearing F-44

HI all,
I want clear open items using with f-44 but cetain open items are not showing in opeing item clearing. i checked in FBL1N all open items are shwoing i want see all open items inf-44 how to see plz help me
with regards
JK Rao

Hi,
Check whether you r giving some additional selection take it as none and are the items in the account have any special indicator you might not be giving here.
reward pts if useful
regds

Similar Messages

Reg Batch in delivery some items are not showing gross weight please help

please give me your help
in Deliveries some items are not showing gross weight
please give me some help

Dear Ramsuresh,
Check are maintaining gross weight in the Master data of those items or not.
If not maintain in the Material master then create delivery
I hope it will help you
Regards,
Murali.

TS4337 I have a Google calendar that is syncing with my iPad and on my MacBook Air. However, the calendar items are not showing up when I access iCloud via the Internet. Any suggestions?

I have a Google calendar that is syncing with my iPad and on my MacBook Air. However, the calendar items are not showing up when I access iCloud via the Internet. Any suggestions?

On the iPad tap Settings > iCloud
Toggle Documents & Data off then back on then restart your iPad.
Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
On the iMac open System Preferences > iCloud
Deselect the box next to Documents & Data then reselect it then restart your iMac.

LeaveRequest Work Items are not shows in SBWP TCODE workplace under outbox

Hi
Friends
I used work flow 12300111 for leave request process and I activated that work flow.
I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
and I got Leave request(work items) Managers in box(uwl in Manager Login in portal).
Manger Approve the leave request has been approved successfully.
can I check whether leave request is processed in R/3.
in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
But in r/3 i execute the Tcode SBWP...
here is no work items are not showing in outbox..
Please help me
Rafi Shaik

HI
Sidhu
Tanks For Ur Replay
i am doing as for u r note..
AFTER DEBUGGING....
function module-- SWK_LOCAL_OUTBOX_GET-under THERE IS NO table->SWW_OUTBOX
PARAMETER NAMES ARE THERE(AVAILABLE)..BUT THIS (SWW_OUTBOX) IS NOT THERE IN TABLES OPTION
WI_LIST_S
WI_LIST_E
WI_LIST_F
STATUSFILTER
TASK_FILTER
yes it wont be shown in sbwp outbox as it is java wd after completion you ll only see for approval in his inbox use swi5...
IN SWI5 TCODE>COMPLETED WORK ITEMS BY AGENT AND TASK-UNDER SHOWING MY LEAVE REQUEST(GOOD)..
CAN PLEASE HELP ME
HOW CAN I GET THE LEAVE WORK ITEMS UNDER SBWP(OUTBOX)
TANKS
RAFI SHAIK

Leave Request work items are not showing in SBWP TCODE under OUTBOX .

Hi
Friends
I used work flow 12300111 for leave request process and I activated that work flow.
I applied leave through ESS from portal(Employee login)employee sends a leave request sends good,
and I got Leave request(work items) Managers in box(uwl in Manager Login in portal).
Manger Approve the leave request has been approved successfully.
can I check whether leave request is processed in R/3.
in tcode se38-RPTARQDBVIEW - UNDER leave request(Leave)->STATUS>COMPLETED,
But in r/3 i execute the Tcode SBWP...
here is no work items are not showing in outbox..
Please help me
Rafi Shaik

it wont be shown in outbox of SBWP
you need to check via SWIA or rptarqdbview or SWI5 for the user
these are java based tasks so will be done in UWL. you can see only the tasks but after approval they are disappeared.
The outbox shows the last 30 days by default. This default cannot be
changed. This 30 days selection period is always set when you enter
the outbox. However, the user can change the selection period by
clicking the button 'Change selection period' on top of the grid
control but this as you know will be reset once you log out.
This is how the mapping from the
backend workplace folders to the UWL tabs should work:
UWL tab                        Backend folder
Notifications                  Deadline Messages
Tasks-> Completed Tasks        Outbox -> Workitems executed by me
Tracking -> My Requests        Outbox -> Started Workflows
Tracking -> Forwarded          Outbox -> Forwarded workitems
Edited by: Siddharth Rajora on Aug 5, 2011 10:04 AM

HT1386 after installing latest itune software,my ipod and outlook in my computer are not showing any calender items prier to one month

After installing latest itune software in my computer, my ipod and outlook in my computer are not showing any calender items i added befor
22nd december.Also not syncing with outlook, any calender items i have added in my ipod after 22nd january.I have selected all events to sync
in my ipod.

Thanks very much I have contacted them via this. Just hope they respond quickly- rather annoing! Greatly appreciated though

Line items are not showing in fbl1n/fk10n

hello all,
Again i needs your help. this time i am not able to see the line items in fbl1n and fk10n. system shows 360 line items are displayed but no line item are showing in screen.In fk10n i am just able to see the period wise balance. but line item not showing. this issue is only with my 5 vendor. in case of other vendor, i am able to see as i wish.
please suggest me how to solve it.
regards
konishko

Hi,
check the Reconciliation of that vendor.for that recon account line display should be selected.
For other vendors, reconciliation account is with line item display .selected. That might be the reason to show line items for remaining items.
check GL master of Recon acccount.

Tax Line items are not showing seperately as per exp in FB60

Hi,
In FB60, I have booked the two expenses with tax code separately. While simulating the entry the tax lines are not showing separately as per expenses. For example:
Suppose my tax code = AB which is equal to 10% maintained in FTXP.
At present entry is coming as follows through FB60 is:
Debit     Postage expenses     500 tax code AB
Debit     Stationery expenses     400 tax code AB
Debit     Tax               100
Credit     Vendor               1000
But we need the entry is follows
Debit     Postage expenses     500 tax code AB
Debit     Stationery expenses     400 tax code AB
Debit     Tax               50
Debit      Tax               40
Credit     Vendor               1000
But I change the tax code for second line AB to XY then calculation of tax entries shows separately according to expenses.
Please let me know where did I do the mistake in configu2026u2026..
Regards,
Babjee

Hi!
Normally, all amounts being posted to the same GL Account and determined from the same tax code as automatically derived, will generate one common auto-generated line item. This is because tax reporting is usually based on tax code (external/tax reporting) and or GL account (internal/financial reporting).
In your first case since the tax code used for both line is the tax code was the same, it would be posting to the same GL Account - hence a common line item got auto-generated.
Check the Account Key and Assigned GL Accounts in T.Code FTXP. Additionally, check the Condition Type set-up (identified from FTXP) in T.Code SPRO / from menu IMG node Check Calculation Procedure.
Regards,
Ruchi

Open item are not showing

hi when iam using t code F-07 out going payment.iam getting
there are no open items managed in account 250001(rental account)
iam unable to post.

hi Nagendra,
To process open item first you need to maintain that GL account for Open Item. Go to T.Code FS00 and check in control Tab page there is 'Open Item Management' check box 'whether your rent account 250001 has maintained for open item or not. if that account is P&L account then system will not allow you to maintain as open item. Only balalnce sheet GL account can be maintained as open item. If there is any balance then it will not allow you to make changes so, first make that account balance is 0 then change.
thx
Ganu

Windows and icons are black, menu items are not showing correctly

Hello!
Well just doing my normal routine today browsing the Internet, watching videos on vlc, my computer suddenly started to glitch. Icons were disappearing, Safari turned black.
So i did a restart but the problem is still there. I cant even choose the user properly because the avatars are not there it's just all dark gray. Remembering where my user avatar is, i do a click and type in my password and I do and able to get in to my system but all windows menu items and icons are black.
Basically what I'm saying is the system seems to be working fine except for that I can't see the icons and windows properly displayed.
I've already tried to reinstall of Mavericks hoping that it's a software thing. You guys think it's a problem with the graphic processor?
Any help or suggestions will be appreciated thank you.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It changes nothing, and therefore will not, in itself, solve your problem.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as certain other aspects of the configuration that may have a bearing on the problem. Don’t be alarmed by the apparent complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in “normal” mode, not in safe mode, if possible. If you’re now running in safe mode, reboot as usual before continuing. If you can only boot in safe mode, you can still use this procedure, but not all of it will work. Be sure to mention that in your reply, if you haven't already done so.
Below are instructions to enter UNIX shell commands. The commands are safe and do nothing but produce human-readable text output, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects. I am not asking you to trust me. If you can't satisfy yourself that these instructions are safe, don't follow them.
The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
{ echo "Loaded kernel extensions:"; kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'; echo $'\n'"Loaded user agents:"; launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'; echo $'\n'"Inserted libraries:"; launchctl getenv DYLD_INSERT_LIBRARIES; echo $'\n'"User cron tasks:"; crontab -l; echo $'\n'"System launchd configuration:"; cat /e*/lau*; echo $'\n'"User launchd configuration:"; cat .lau*; echo $'\n'"Login items:"; osascript -e 'tell application "System Events" to get name of login items' | sed $'s/, /\\\n/g'; echo $'\n'"Safari extensions:"; /usr/libexec/PlistBuddy -c Print L*/Saf*/*/E*.plist | awk -F'= ' '/Bundl/{print $2}' | sed 's/\..*$//;s/-[1-9]$//'; printf "\nRestricted user files: %s\n" $(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); echo $'\n'"Extrinsic loadable bundles:"; cd; find -L /S*/L*/E* {,/}L*/{Ad,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do /usr/libexec/PlistBuddy -c 'Print :CFBundleIdentifier' "$d/Info.plist" | egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|print|SoftRAID" && echo ${d%/Contents}; done; echo $'\n'"Unsigned shared libraries:"; find /u*/{,*/}lib -type f -exec sh -c 'file -b $1 | grep -qw shared && ! codesign -v $1' {} {} \; -print; echo; ls -A {,/}L*/{La,Priv,Sta}* L*/Fonts; } 2> /dev/null | open -ef
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A TextEdit window will open with the output. Post the contents of the TextEdit window (not the Terminal window) — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
{ echo "Loaded system agents:"; sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|cups|isc|ntp|postf|x)/{print $3}'; echo $'\n'"Login hook:"; sudo defaults read com.apple.loginwindow LoginHook; echo $'\n'"Root cron tasks:"; sudo crontab -l; echo $'\n'"Log check:"; syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail | awk '/:/{$4=""; print}'; } 2> /dev/null | open -ef
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
You can then quit Terminal.
To prevent confusion, I'll repeat: When you type your password in the Terminal window, you won't see what you're typing.
Note: If you don’t have a login password, set one before taking Step 2. If that’s not possible, skip the step.
Important: If any personal information, such as your name or email address, appears in the output of these commands, anonymize it before posting. Usually that won't be necessary.
Remember, Steps 1 and 2 are all copy-and-paste — no typing, except your password. Also remember to post the output as text, not as a screenshot.
Please post the contents of the TextEdit window, not the Terminal window.

Gmail calendar items are not showing up in calendar app

I've synced my Gmail account and calendar but only items saved to phone calendar is showing up, All my Gmail calendar items aren't there.
I seem to have synced everything I need to sync but still nothing shows up. Help!

I'm having the same issue on my Fascinate. It started Friday (5/20/11) with most of the items on my Google calendar not showing up on my phone. Some items are still there (although none from my primary calendar). I created a new item on Google, and it did show up on the phone. I had the Froyo update pushed out to me on Saturday morning, but doesn't seem to have made any difference - good or bad. I've checked all the account settings, sync on, etc. and everything looks OK. I can do a manual sync, but that doesn't make things show up either.
Finally, my mother-in-law has the same phone, and is having the exact same problem starting this weekend as well. She hasn't gotten the Froyo update - so I don't think that is it.

Old items are not populated after adding items into a master/detail form

Hi,
I am relatively new to APEX. I am creating a master/detail form. It works well. When I add new items the older items are no more populated. Why ?
For example I have an itme which is a select list as a Named LOV. At creation of the row I want the user to choose from this select list. It works well.
But when modifying the record, I don't want the user to change this name. For that purpose, I create an item which is a display only item. This item is conditional and appear only when the record has been created.
And this is where the problem comes. It seems to work but, if I logout of the application and login, then values are no more populated to the items and I get an error when trying to update the form.
I hope I make it clear. I have been trying a lot of times and found that if I add items, then everything goes wrong.
Thank you for your kind help.
Christian

Hi Christian,
You don't say what the error is that you are getting - this may help us with your problem!
On the form, do you now have TWO fields - one being the original select list and the other being a read-only version of it? Is it likely that BOTH fields could appear on the page at the same time AND that both are connected to the field on the table?
You can set the select list to be read-only conditionally - in this case you could make it read-only on the condition of the primary key field not being null.
Andy

Line items are not showing in fbl3n,fs10n,faglb03,fagll03

hi experts,
i am facing a problem to see the line item of inter unit clearing a/c. i am not able to see the line items in fbl3n,fs10n,fagll03 and faglb03. system response is "You have stored account 300000 in company code L001 as a clearing account. At the same time, you use line item management with this account" and"Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected"
i do not understand the system response. can anyone please help me to solve this problem?
thanks &regards
konishko

sir
thanks for your reply. as per your suggestion i am trying to change in fs00 to uncheck the line item management but i am unable to do that,system shows that i have to uncheck the open item managemt also but the said account contain the open item. so i am not able to change the same. is there any other way to do that. can you please suggest me in detail? and one more thing that i am able to see only the balaces in fs10n. but not able to see the line item.this is probably for missing the business area in line item.
but i needs to see the line items.
can you please tell me any alternate way in detail to solve this problem?
thanks and regards
konishko

Subject Profile Items are not showing in CRMD_Order

Hi
We are in process of Service Desk config. We have copied the standard Subject Profile from SLFN001 to ZLFN001 and copied Code Group I1 to Z1 , Copied Codes MLDDGM1 to ZLDDGM1 and added our own subjects as per the requirement. When we create the ticket the Subject is empty.
Is there any thing else that needs to configure?
Regards
Rajesh

Hi Rajesh,
You might have missed a layer in this many-layered assignment Here is the hierarchy (for example):
Code group ZMLDDGM1 contains your codes
...Code group profile ZLFN0001 contains your codegroup
......Subject profile ZLFN0001 contains your code group profile
Then you assign subject profile ZLFN0001 to your transaction ZLFN under IMG "Define Transaction Types"
           --> Assignment of business transaction categories
                  --> service process
                      --> customizing header
Good luck!
Jon

Open apps do not show as open in dock...

... command tab only shows Finder. I can navigate to the other 9 apps that are open with the mouse. Strange. I have repaired permissions, activity monitor shows nothing out of the ordinary.

HI Hugh,
Open System Preferences/Keyboard&Mouse/Keyboard Shortcuts. Click; Restore Defaults. Quit System Preferences and reboot.
See if that helps...
If not, try deleting this file: com.apple.finder.plist /Users/YourName/Library/Preferences. Drag that file from the Preferences folder to the Trash, empty the Trash and reboot.
Carolyn

Reg: Certain Open Items are not showing in open item clearing F-44

Similar Messages

Maybe you are looking for