Reg:challan creation for 701 movement type
Dear All,
Is there any possibility to create challan referring to the 701 movement type I've included the movement type for sub transaction type in SPRO but even then it is not allowing is there any possibility ?
Reg
VVK
Hi
U can create challan for 701 mvt.
Make sure the mvt 701 is included in subcontracting issues group type with spl stock indicator O.
make sure all other settings for subcontracting are correct like number ranges for series group of subcontracting, excise a/c for 57fc with subtrabsaction 01.
Check and revert with the problem u face bcoz i tried in my system and it worked.
Reg
Raja
Similar Messages
-
Batch Creation or Batch Determination for 531 movement type
Dear Experts,
I have some confusion with Movement type 531 -
1) Can we do Batch determination for 531 movement type.
2) Can we do the automatic Batch creation at the production order level or confirmation level. In this case i have done the settings but in confirmation screen i have to create batch manually through Menu Path.
3) I have to enter characteristics value manually in confirmation screen as i have select classify batches in foreground. But in material master we have Batch Class type so can values comes from there to batch of confirmation screen.
Thanks & Regards,
Saurabh KumarHello
Please read carefully notes 191368 and 194619. These are very old correction notes and they are already implemented on your system, however, they provide the following information about the system design:
For a by-product or co-product, no batch determination is executed anymore. The subsequent stock determination is not executed anymore either.
and
No batch determination for by-products may be executed during the confirmation.
It means that the batch determination for movemen 531 is not a functionality of the standard system.
I have never tested this scenario, however, as far as I know, the batch can be created automatically for the by-product if you are using internal number range on OMCZ.
BR
Caetano -
Hi Guru;
In our system for 641 Movement Type Batch is not coming for Receiving Plant.
Ex
MBLNR MJAHR BWART MATNR WERKS UMWRK LGORT UMLOG CHARG UMCHA
4900342714 2010 641 1256-3230-0 M300 B311 MA01 1000015247
4900342714 2010 641 1256-3230-0 B311 M300 MA01 1000015247
4900342724 2010 641 1256-2190-0 B121 M100 MA01 1000016376
4900342724 2010 641 1256-2190-0 M100 B121 MA01 1000016376
In Above Data For MAT DOC 4900342714 Batch is not coming for Plant B311. We are doing Batch ageing from the batch creation date.so for these case (i.e for Stock in Transit data we are not able to show that in our ageing report as it is showing these without batch)
I want to kw that, is there any problem in our system or its a standard and how to handle this situation.
ThnaksHi,
For this you need to set up Strategies for Stock determination.
Trasncation code : OSPX
Go to new entries.
Enter your plant code and any 4 digit key and save.
Select this entry and click on the stock determination rule. Type any 4 digit key and save.
Click on Stock determination header. Select your entry, which is having your given plant code, stock determination group and stock determination rule and click on the stock determination item table.
there you have to maintain all ur batches as per the combination of Periotity indicator, Storage location and stock indicator.
For first periority - 1& second periority - 2 & third periority - 3
Storage location - 0001
stock indicator - F for standard & K for consignment.
F 0001 1 A
F 0001 2 b
F 0001 3 c
F 0001 4 d
This stock determination group ( 4 digit key), you have to maintain in the material master record - MRP2 view.
Maintain stock determination group and MRP profile - ND
Then during GR, system will check stock determination group in the MMR and based on that first system stock availability for the first periority batch. If stock is there, it will pick. If stock is not there, system will pick second one.
Regards
KRK -
Inspection lot creation logic related movement type
Dear QM Guru,
I'm newly for QM module
I would like to know how config of movement type and lot origin under below config relate to inspection lot creation.
Quality Management>Quality Inspection>Inspection for Goods Movements-->Movement Type/Update Control/Inspection Lot Origin
i try to delete all record of customized movement type 949 that i think it copy from movement type 501 in this customizing then try to GR with this movement type, so system still generate inspection as normal.
then i re-insert the movement back into this customizing again then i wonder that system automatic fill in lot origin for me and this field also gray that not changeable
how system know the appropriate lot origin for this customized movement type?
Please anyone explain to me.
Thank in advance
KonnapaHi,
Inspection lot origins are assigned to movement types in standart. The assignment is hardcoded and cannot be changed. In this customization step you can only see the origin assigned. When you copy movement types from standart the assigned inspection origin also gets copied, and you also cannot chenge this assignment.
What you can do is to activate inspection for each movement type, or to customize selection of the inspection type within the inspection origin assigned.
Regards. -
Sap notes for 103 movement type and 105 movement types in sap
Hi all,
Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possible
points will be awarded.
thanking u in advance,
srinivas.There are many SAP notes related to these movement types e.g 514609,750836,
533833, 808029, 317823,etc.
You can search them at http://service.sap.com
Regards,
Amit -
Report MB5B for selected movement types
Dear All,
When I am executing report for selected movement types , system givivng me message below " Movment type is reset"
After continuing that Movement type field turns BLANK, and report is executed with considering all movement types.
If there is a way for executing MB5B report for selected movement types, please suggest.
Thanx..Hai,
1.The MB5B report will show the stock on posting date with all movements like Goods recipt from Purchase, production order, stock transport order, & goods issue due to consumption posting, stock transfers & transfer posting.
2. This is designed to see the Opening balane+Goods receipt - goods issue = closing balance.
3.You can't take report only for particulat movement type.
4.If u want to get the details as per the movement type, then use MB51 report. -
PGI for STO movement type error Message no. L9005
Hi Gurus,
I have created an STO.Created delivery and confirmed TO.
Now while doing PGI,single step only(647 movement type),
system throws the following message,
"" Error during search for WM movement type (641 1 L K )
Message no. L9005 "".
As per my checking for both IM movement types 641 and 647, ' 641 ' has been assigned as
Ref movement type and " 601" has been assigned as WM movement type.
601 is maintained in WM.Should I maintain 641 in WM?That case I have to change SAP std settings..
If so pls provide me the details for 641 K.
Kindly help.
Best RegardsHi Kumar,
Try the following:
Maintain an entry for your warehouse with movement type 641 SpStIn and Movment Indicator l combination in transaction OMLR.
And also ,
Check in IMG Path - Enterprise Structure --> Assignment --> Logistis Execution --> Assign warehouse number to plant/storage location.
Here check whether the warehouse number is assigned to your plant and storage location.
Thanks!
Preethi
Edited by: preethi R on Dec 2, 2008 10:50 AM
Edited by: preethi R on Dec 2, 2008 10:50 AM -
Amount not turning up for material movement type : 601 from 2lis_03_bf
Hi all,
i have loaded the inventory cube from 2lis_03_bx the quantity is turning up for movement type 601 but the amount is not getting reflected it is always blank.
If ( SOURCE_FIELDS-BWVORG EQ '000' "Other Issues
OR SOURCE_FIELDS-BWVORG EQ '101' "Returns / Vendor
OR SOURCE_FIELDS-BWVORG EQ '104' "Material Transfer
OR SOURCE_FIELDS-BWVORG EQ '105' "Stock Adjustment InvD
OR SOURCE_FIELDS-BWVORG EQ '106' "Stock Ajdustment Other
OR SOURCE_FIELDS-BWVORG EQ '110' )
"Issues from stock transfer
AND SOURCE_FIELDS-BWAPPLNM EQ 'MM'
only movements which are relevant for stock control
AND SOURCE_FIELDS-BWBREL EQ '1'
AND SOURCE_FIELDS-BWGEO <> 0
SEE OSS NOTE 630254
AND ( SOURCE_FIELDS-BSTTYP IS INITIAL OR
( SOURCE_FIELDS-BSTTYP CA 'EQ' AND
SOURCE_FIELDS-KZBWS CA 'AM' ) ).
*IF THE RETURNCODE IS NOTE EQUAL ZERO, THE RESULT WILL NOT BE UPDATED
RESULT = SOURCE_FIELDS-BWGEO.
and i can see for other movement type like 641 the amount is turning up.
Can anyone advise me on this
thanksdoes the material movement type : 601 will be updated from this data source : 2lis_03_bx nor it is from 2lis_03_um??
Can anyone advise me on this!!
thanks -
Error during search for WM movement type (999 E )
Dear ALL,
I am try to reverse transaction 313. i use movement 314 but there is error message during creating delivery. the message is
"Error during search for WM movement type (999 E )"
Could someone help me please ?
Thanks & Best regrads,
Saiful arifHi,
Please check the reference movement type in table V_156S_WM for inventory movement 314 and for your case of qty and value update indicators
For qty updation indicator checked, you will have a reference movement type 3XX and not equal to 999
for qty updation indicator not checked, you will have reference movement type 999
qty updation indicator checked means stock / quantity controlled in which case
check your set up in transaction OMLR , reference movement 3XX from above table should be assigned to a proper WM movement type 3YY
then check for WM movement 3YY in Transaction OMLJ which should have source storage type maintained.
qty updation indicator not checked means stock / quantity not controlled or updated in which case reference movement type is 999 which has no maitenance in OMLR, moreover it is no stock / qty and no stock transfers situation
If 3XX happens to be 999 in your case, then check for 3YY movement in OMLR and check for storage type determination for 3YY in OMLJ
Please note 999 as WM movement is used for manual transfer within warehouse but not for warehouse movements resulting from IM.
Hope this should solve your problem.
Regds
Shrihari -
Reason for Movements for selected movement type in MB1A/B/C
All,
When a user goes to MB1A, MB1B, MB1C and selects a movement type is there a way to show only the reasons for movements for that selected movement type?
Currenlty, when the users clicks F4 or wants to view the options available for reasons for movements, it shows them EVERYONE movement type and its associated reason for movement. The list is HUGE. So, I want to know to shorten the list to show only the applicable ones for the movement type the user has selected.
I know the user can enter the movement type and the list gets filtered but this is a manual step the user must perform. Is there any way the system can restrict the reasons for movements based off the Movement Type already selected by the user?
Please let me know how to show only those reason codes for the selected movement type in transactions MB1A, MB1B, and MB1C.
Thanks for your help in advance!To shorten the list you can select the movemnt types the user requirs and make his/her personal list so when he.she do f4 onlt personal list will be displaed.
U can create personal list by doing the F4 and put cursor on movement type and below will be icon to add into personal list.after selecting all the movement types. close the window and adain do f4 u will only see the entries of u r personal list. -
Error during search for WM movement type (911)
Hi gurus,
I am using tx code MB1A (Mov type 911). When I try to save it I received the following error message:
"Error during search for WM movement type (911)"
any idea of this message?
Thanks in advanceThe probable reason is that the storage location is Warehouse Managed and the system is not able to find a WM movement corresponding to the IM movement in the warehouse. Please check if the IM Movement type 911 mapped to a WM movement type for the warehouse in configuration?
Lakshman -
MIGO T code for 453 Movement type
hi sap gurus,
I am getting These error message when i am using MIGO T code for 453 Movement type
Deficit of BA Ret.blocked prev. 104 EA : NTH-607-P5G 1034 3401 5786051This means your stock level in return blocked stock is not sufficientt to be able to carry out the goods movement. Check your stock level for your material in MARD-RETME (or in MB52).
Mvt 453 means stock transfer from return blocked stock (that was sent back by customer) to your own stock. Return blocked stock is owned by the customer, through this goods movement you take over the ownership of the goods.
Regards,
Csaba -
Find TR for a movement type....How??
Hi Friends,
Is there any standard SAP transaction which can provide us a list of TR for specific movement type.
Thanks,
Mike
Edited by: Mike on Nov 25, 2008 9:59 PMHello,
yes it is: LX09 - Document Overview
Andrzej -
Adding a new filed to 'allowed fields' for a movement type
Dear All
Can I add a new field to the allowed fields for a movement type at the SPRO node 'field selection for movement type'
ThanksPost Author: V361
CA Forum: General
Could you be reporting from a View instead of a table ? -
Bapi_goodsmvt_create for 961 mov. type
hi all,
can i use bapi_goodsmvt_create function module for 961 movement type?
Edited by: vinil aturi on Jun 11, 2008 11:10 AMdear aturi,
what is the 961 movement type for ?
Yes you can definitley use BAPI_GOODSMVT_CREATE for 961 Movement Type
as i had used it for 101 and 301 movement types in my program.
Hope this helps you out.
Do reward if useful.
Thanks
Venugopal
Maybe you are looking for
-
Hi, How do I insert a new JSP file (yet to be programmed / designed) into PORTAL-INF/jsp folder in an new EP project. I do not find any options to it. Kindly help me with steps. Cheers!! Sukanta Rudra
-
How to see all my posts in OTN?
How to see all my posts in OTN? If I click on my username it shows recent posts only. Since I need to see all of my posts, I may not remember all key words to seach
-
Adobe 10.1.2 crashes when attempting to print.
Still expericing problem with printing in citrix enviroment running xenapp 4.5 on windows 2003 64 bit. Workaround to disable protection mode worked for a few day and they stopped also the shared printer name fix does not apply since the printer are a
-
Ads in notifications and icons added to home screen.
This is happening on my wife's phone. Notifications that are ads and icons to a different market added to her home screen. I assume it is an app that is doing it, but I cannot figure out which. Any tips on finding this thing or stopping the behavior?
-
Accidentally deleted most of Itunes
I "accidentally" deleted iTunes. I moved it to the trash as a TEMPORARY solution to it's constant unwanted opening on it's own every 5 minutes. I then FORGOT it was in trash and emptied trash I clicked "stop" as soon as the "unable to empty" warn