Reg. Changes in SAP AII D.C 4.0

I am using SAP AII D.C. 4.0 and SUN RFID 3.0 middleware to find out RFID Autoid solutions. While doing tag Commission from SAP, It sends a XML message to SUN RFID middleware. Because of SUN RFID 3.0 supports only SAP AII D.C. 2.1 XSD, I am getting XML Parser error. SAP AII D.C. 4.0 has some modification in XSD.
What is the workaround for this?
A detailed help would be appreciated.
Please mail me relevant documents to [email protected]
Thank you

solved

Similar Messages

How to change com.sap.aii.connect.integrationserver.r3.mshost

Hello Colleagues,
java system is down,i want to change the com.sap.aii.connect.integrationserver.r3.mshost -81xx in configtool.
can u please tell me where to change in configtool???

Hello
>
Raj_kumar330 wrote:
> waiting for reply???
Please have some patience. It is unrealistic to expect a response within 17 minutes of creating a thread.
If your java engine is down, it does not possible to access the Exchange Profile URL. Is it absolutely necessary that you change this parameter before the java engine issue is resolved? Why not wait until the java engine is back up and then make the change?
Regards
XI/PI Moderator

Reg: If changes done in SAP BO Analysis office, then Changes can be done in SAP BW in respective targets. But, is it possible to do the same changes in SAP ECC? How?

Hello Everyone,
If any changes are done in SAP BO Analysis office, then the change can be done in the SAP BW in the respective Targets.
But how can we do the changes in the SAP ECC ? Is it possible to do the changes in the tables ?
Any answer is appreciable
Regards,
Karteek

We are using the "Input ready Bex query", in order to modify the values in "BO Analysis office".
ECC               BI               BO Analysis office
1 ------------->   1   ---------->         1   ------
                                                                        |
                                                                        | (Now Data is changed in Analysis office from 1 to 2)
                                                                        |
(?) <--------------   2 <----------         2 <-----
(Will it be updated in ECC)
(Diagram Explanation)
From ECC we can load the data (Consider Value-1) to SAP BI and from SAP BI we can load the data to BO analysis office.
So, now if we change the data in BO Analysis office (Value-1 changed to Value-2)..
Now the data is changed in SAP BI to Value-2.
So what about the data in ECC ? Whether it is changed or not?
Please provide us a real time business Scenario..
Thanks,
Karteek

SAP Java Connectivity Builder -NoClassDefFoundError com.sap.aii...Reference

Hi there,
I'm trying to generate Java Proxies for SAPJCO using the SAP Java Connectivity Builder (JCB). I got it from the NetWeaver 6.20 Release. The tool installs and runs properly but after putting in the connection properties and klicking "next", the application hangs. When activating System output, I get the error shown below.
I already tried to put all jar files contained in the C:\JBuilder5\lib\ext directiry into the classpath (but none of them contains the class mentioned).
Which is the right (standalone) tool for generating Java Proxies for a standalone Java application?
If it is JCB, is there a bug on the version I use (NetWeaver Release 6.20)?
Any help would be apreciated.
C:\JBuilder5>java -Dlog.handler.FileLog=FileHandler,log.txt -Dlog.logger.com=ALL,FileLog -cp lib/ext/aii_basis.jar;lib/e
xt/aii_ifr_core.jar;lib/ext/aii_ifr_jbtool.jar;lib/ext/aii_lcraccess.jar;lib/ext/aii_msg_runtime.jar;lib/ext/aii_proxy_g
en.jar;lib/ext/aii_proxy_rt.jar;lib/ext/aii_util.jar;lib/ext/aii_util_log.jar;lib/ext/lcrclient.jar;lib/ext/logging.jar;
lib/ext/SapIdeHelp.jar;lib/ext/SapIdeJBUtil.jar;lib/ext/SapIdeJspInsight.jar;lib/ext/SapIdeTaglibReflection11.jar;lib/ex
t/SapIdeTracing.jar;lib/ext/SapIdeUtil.jar;lib/ext/SAPJ2EEEngineJBuilderPlugin.jar;lib/ext/sapjco.jar;lib/ext/SAPmdi.jar
;lib/ext/servlet.jar;lib/ext/tc_sec_core.jar com.sap.aii.ifr.tool.jbuilder.JBuilderTool
#0 12:35:37 [main] DEBUG com.sap.aii.util.misc.api.AIIProperties: Initial AIIProperties
        com.sap.aii.client = true
#1 12:35:37 [main] FINE com.sap.aii.util.misc.api.AIIProperties: changed Property "com.sap.aii.standalone" from "null" t
o "true"
#2 12:35:37 [main] FINE com.sap.aii.util.misc.api.AIIProperties: changed Property "com.sap.aii.xml.parserFactory" from "
null" to "com.inqmy.lib.jaxp.SAXParserFactoryImpl"
#3 12:35:37 [main] FINE com.sap.aii.util.misc.api.AIIProperties: changed Property "com.sap.aii.xml.transformerFactory" f
rom "null" to "com.inqmy.lib.jaxp.TransformerFactoryImpl"
#4 12:35:46 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.upload.client.SAPNavigationPane: New file is C:\Documents and Setti
ngs\kalkoo1\Desktop\t.jar
#5 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Client : 010
#6 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Logon Name : kalkoo1
#7 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Password : #########
#8 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Language : EN
#9 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for Host name: bgstsapedai01.s
t.behr.de
#10 12:36:08 [AWT-EventQueue-0] FINER com.sap.aii.ifr.upload.client.R3LogonScreen: setting for System number : 20
#11 12:36:08 [AWT-EventQueue-0] INFO com.sap.aii.ifr.upload.client.R3LogonScreen: trying to establish connection
#12 12:36:08 [AWT-EventQueue-0] FINEST com.sap.aii.ifr.util.IdentityCheck: Looking up identity
#13 12:36:08 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.util.IdentityCheck: Results of identity check: isIFRServer: false;
isIFRRMIClient: false; isStandaloneIFR: true
#14 12:36:08 [AWT-EventQueue-0] FINEST com.sap.aii.ifr.util.IdentityCheck: Checking IdentityCheck.isIFRServer. Result: f
alse
#15 12:36:08 [AWT-EventQueue-0] INFO com.sap.aii.ifr.upload.sap.SAPConnection: connecting to system 20 on bgstsapedai01.
st.behr.de via JCo
#16 12:36:09 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.upload.sap.SAPUploadSource: init MDI to System bgstsapedai01.st.be
hr.de (system=20, client=010) (BasisRelease: 620)
#17 12:36:09 [AWT-EventQueue-0] DEBUG com.sap.aii.ifr.upload.UploadBuffer: new UploadBuffer
Exception in thread "AWT-EventQueue-0" java.lang.NoClassDefFoundError: com/sap/aii/ifr/client/editor/Reference
        at java.lang.Class.getDeclaredMethods0(Native Method)
        at java.lang.Class.privateGetDeclaredMethods(Unknown Source)
        at java.lang.Class.getDeclaredMethod(Unknown Source)
        at java.awt.Component.isCoalesceEventsOverriden(Unknown Source)
        at java.awt.Component.access$100(Unknown Source)
        at java.awt.Component$2.run(Unknown Source)
        at java.awt.Component$2.run(Unknown Source)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.awt.Component.checkCoalescing(Unknown Source)
        at java.awt.Component.<init>(Unknown Source)
        at java.awt.Container.<init>(Unknown Source)
        at javax.swing.JComponent.<init>(Unknown Source)
        at javax.swing.JTree.<init>(Unknown Source)
        at javax.swing.JTree.<init>(Unknown Source)
        at com.sap.aii.ifr.navigation.IFRJTree.<init>(IFRJTree.java:84)
        at com.sap.aii.ifr.navigation.IFRTreePane.buildPane(IFRTreePane.java:123)
        at com.sap.aii.ifr.navigation.IFRTreePane.<init>(IFRTreePane.java:33)
        at com.sap.aii.ifr.upload.client.SAPNavigationPane.<init>(SAPNavigationPane.java:43)
        at com.sap.aii.ifr.upload.client.SAPBrowser.setIsConnected(SAPBrowser.java:252)
        at com.sap.aii.ifr.upload.client.SAPBrowser$ConnectAction.actionPerformed(SAPBrowser.java:594)
        at com.sap.aii.ifr.upload.client.SAPBrowser$NextAction.actionPerformed(SAPBrowser.java:536)
        at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
        at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
        at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
        at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
        at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
        at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
        at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
        at java.awt.Component.processMouseEvent(Unknown Source)
        at javax.swing.JComponent.processMouseEvent(Unknown Source)
        at java.awt.Component.processEvent(Unknown Source)
        at java.awt.Container.processEvent(Unknown Source)
        at java.awt.Component.dispatchEventImpl(Unknown Source)
        at java.awt.Container.dispatchEventImpl(Unknown Source)
        at java.awt.Component.dispatchEvent(Unknown Source)
        at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
        at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
        at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
        at java.awt.Container.dispatchEventImpl(Unknown Source)
        at java.awt.Window.dispatchEventImpl(Unknown Source)
        at java.awt.Component.dispatchEvent(Unknown Source)
        at java.awt.EventQueue.dispatchEvent(Unknown Source)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
        at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
        at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
        at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
        at java.awt.EventDispatchThread.run(Unknown Source)

Hi,
>> Error :- java.lang.NoClassDefFoundError: com/sap/aii/security/proxy/KeystoreHelp
1) Can you check the class path you have mentioned is correctly
2) Setting of the Java in your system ( Desk top /Lap top ) check the Proxy settings
3) Re start the J2EE engine in the server
Regards
Agasthuri Doss

"call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryExceptio

Hello XI guru,
I am configuring RFC to File scneario where i am using BAPI as Source. When i run this BAPI in se37 it gives me short dump stating "call to messaging system failed: com.sap.aii.af.ra.ms.api.DeliveryException:
Please help.
Also I want to know is it necessary to write wrapper for BAPI before configuring. This bapi list all orders created in SCM system.
awaiting ur advises and help
Thanx
Anu

Hello guys,
I am sorry but kind of confuse, please be with me.
I have RFC with following structure:
'Z_BAPI_MOSRVAPS_GETLIST2'
importing parameters
      LOGICAL_SYSTEM = T_LOGICAL_SYSTEM
      START_TIME = T_START_TIME
TABLES
      PRODUCT_SELECTION = T_PRODUCT_SELECTION
      LOCATION_SELECTION = T_LOCATION_SELECTION
      LOCTYPE_SELECTION = T_LOCTYPE_SELECTION
      ORDER_HEADS = T_ORDER_HEADS
      OUTPUT_NODES = T_OUTPUT_NODES.
I put values in logical system/start_time/
product_selection/location_selection/loctype_selection
based on these values order_heads and output_nodes is populated. I want value of these to tables to be sent as file.
Data structure for file is as follows
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ORDER_MT xmlns:ns0="uri:scm:sql:transaction">
- <ORDER_HEADS>
- <ITEM>
<ORDER_NUMBER />
<ORDER_TYPE />
</ITEM>
</ORDER_HEADS>
- <OUTPUT_NODES>
- <ITEM>
<MASTER_PRODUCT />
<MASTER_PLANT />
</ITEM>
</OUTPUT_NODES>
</ns0:ORDER_MT>
But the payload has value
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:ORDER_MT xmlns:ns0="uri:scm:sql:transaction">
remaining is not seen in sxmb_moni and payload cannot be read error is given.
file structure is dummy structure, please tell me know if it is right or i need to change.
Thanx
Anu

Import com.sap.aii.mappingtool.* show error in PI 7.1 adapter module

Hi
Experts,
i have an adapter module for 7.0 and i am trying to replicate the same for PI 7.1 in 7.1 NWDS.
i have made the required changes as mentioned in stefan's blog :/people/stefan.grube/blog/2008/12/11/adjust-your-pi-70-adapter-modules-for-pi-71-in-15-minutes
but import com.sap.aii.mappingtool.tf7.rt.Container; shows error , do we need to inlcude any jar file for this :
i am using this module to rename file name (in case of pick and place scenario forwithot IR configuration)
getMessageProperty and setmessageProperty is getting deprecated.(striked off)
strFileName = msg.getMessageProperty("http://sap.com/xi/XI/System/File","FileName");
Regards,
Srinivas

> strFileName = msg.getMessageProperty("http://sap.com/xi/XI/System/File","FileName");
in PI 7.1 you can use:
strFileName = msg.getMessageProperty(new MessagePropertyKey("FileName","http://sap.com/xi/XI/System/File"));
Note that property name and namspace come in different order. I almost got mad until I noticed
http://help.sap.com/javadocs/pi/SP3/xpi/index.html

Impact of FQDN changes in SAP PI

Dear all,
We are currently using the SAP Netweaver PI 7.31 and change the FQDN for the system.
Please let me know where we need to change the new FDQN in PI Profiles apart from DEFAULT.PFL.
Many thanks in advance for support and cooperation.
Regards,
Tahir

Hi,
Below Exchange Profile parameters has to be maintained with FQDN, after adding the FQDN please take a java stack restart then only it will be reflected.
URL: http://host:port/exchangeProfile
com.sap.aii.connect.cr.name
com.sap.aii.connect.directory.name
com.sap.aii.connect.integrationserver.name
com.sap.aii.connect.landscape.name
com.sap.aii.connect.repository.name
com.sap.aii.connect.rwb.name
com.sap.aii.rwb.server.centralmonitoring.name
Thanks,
Krupa

Com.sap.aii.adapter.file.ftp.FTPEx: 550

Hi,
I have the below error in my sender file channel. I also read the following thread
FTP Error
Error:
An error occurred while connecting to the FTP server '10.12.12.101:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 C:Inetpubftproot: The filename, directory name, or volume label syntax is incorrect. '. For details, contact your FTP server vendor.
The above thread suggests me to change the setting in the IIS. Should do that settings in the PI server or the source FTP server.
Also does anybody have any other solution to this problem.
Rgds,
Mithun

HI,
If you're using an FTP server you need to know the path to the file on the FTP.
To do this I suggest to connect to the FTP using Internet Explorer and navigating the FTP folders until reaching the right one.
Then on the url bar you should got something like this: "ftp://server:21/path/to/file/". Use "/path/to/file" as value for the file adapter configuration.
Please refer below blogs:
unable to send file to FTP server
FTP to Windows Server
thanks,

Could not process file 'Input 110110b.txt': com.sap.aii.adapter.file.

I have a FILE Adapter using FTP as a transport that is generating a very odd error.
The FTP sender channel is giving the following error is set up to retreive all files (*) from a specific directory. If you look at the error, it indicates an error processing the file 'Input 110110b.txt' as a file -- the only way this filename woudl be visible is if the adapater interrogated the directory, or the filename was hard-coded in the file mask. But the error indicates it can't change to the directory. The only way it would have come up with the file is if it had already CD'd t that directory.
1/7/11 8:12:01 AM   Retry interval started. Length: 60.0 seconds
1/7/11 8:12:01 AM   Could not process file 'Input 110110b.txt': com.sap.aii.adapter.file.ftp.FTPEx: 550 Failed to change directory.
1/7/11 8:12:00 AM   Processing started
My first thought was a simple permission issue, so I opened a connection to server with FileZilla (an FTP client) and was able to retrieve the file without a problem. I was also able to drop a file in the directory. There is no permissions problem.

Hi
Please check the below points before processing any file
a) check the File placing by a Local Plant FTP owner is using the same authentification credentials It means both PI and source team needs to use same FTP User ID and login credentials otherwise if suppose if source team is placing with one User and PI cannot able to pick that file as this User cannot have permissions in this case also u will get 550 error
b) I know what ur telling is u manualy palced one file and able retrive...but do one thing u can login with same PI FTP login server credentials and then place the file with different name also I suggest lets test the channel by simply keeping
. not simply * if you keep simply * then u cna use in receiver chanel while using dynamic connfiguration.
Else give *.txt and then activate the channel and also please check the CACHE as well
Regards
Amar Srinivas Eli

Com.sap.aii.adapter.file.ftp.FTPEx: 421

Hi Guys,
I am getting these two error messages:
1) com.sap.aii.adapter.file.ftp.FTPEx: 421 Maximum session time exceeded - closing
2) com.sap.aii.adapter.file.ftp.FTPEx: 421 Too many users - please try again later
when XI Sender File Adapter tries to pick the files from the FTP server.
I have not set any limit to the number of session for the user that I have mantianied in the adapter. (Niether I know it -:) how to set.)
Any idea or help, how to resove this error.
Thanks in adavance,
Namadev

Hi Namdev,
Your this error is coming as your FTP server maximum allowed connection is reached. so as the solution I would suggest to change the Connection mode property of your communication channel as Per File Transfer as default property is Permanently which reserves connection forever.
So other communication channels cannot communicate. Make this changes to all the communication channel you have configured.
And your problem is solved.
enjoy....
Thanks & Regards,
Gaurav Patwari

Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableExcep

Hi,
I am generating IDoc for infotype 2006 through creating Change pointers using the Function Module 'CHANGE_POINTERS_CREATE_DIRECT'.
The problem is the Idoc is not reaching the receiver system. It is showing the below error message when i checked it in RWB Communication Channel Monitoring,
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'XXXXX' (structure 'callperson'): com.microsoft.sqlserver.jdbc.SQLServerException: Warning: Fatal error 7987 occurred at Dec 17 2009 1:43PM( $ . Note the error and time, and contact your system administrator.
The scenario is Sender: Idoc and Receiver : JDBC adapters.
Please let me know how to solve this issue.
Thanks,
Sri

Hi,
From the error message: "Error processing request in sax parser: Error when executing statement for table/stored proc. 'XXXXX' (structure 'callperson'): ". I think:
(a) If there is any data type mismatch like a character field from PI is trying to post into a date or numeric field in the stored procedure. You need to check if the data type of the fields in PI and the stored procedure are same?
(b) If there is any structure mismatch when the XML is created by BADI like any mandatory fields are missing.
Thanks,
Manohar Dubbaka

Intermittent issue in PI-com.sap.aii.af.ra.ms.api.MessageExpiredException

Hi everbody,
We are with Intermittent problem in SAP PI 7.0.
Some messages have this error below:
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.MessageExpiredException:
Message 4bdefeac-f3e8-01de-e100-8000ac103265(INBOUND)
expired</SAP:AdditionalText>
The error above is appearing in Synchronous messages in trx sxi_monitor.
We read the note 730870 and the timeout parameters is ok.
We tried to stop/start in 'SAP XI AF CPA Cache' and 'SAP XI AF Messaging' but it not worked.
We have one message in a SAP but I think they do not have idea yet.
The adapters are involved are RFC and SOAP.
We changed the parameters:
- 'xiadapter.inbound.timeout.default' from 180000 to 300000 .
- 'syncMessageDeliveryTimeoutMsec' from 300000 to 600000 .
- 'syncMessageRemover.checkInterval' from 60 to 5 .
Please, could you have some idea to resolve this issue ?
ps: The error started after the stop/start for renew certification in keystore (j2ee) .
Best Regards,
Victor Yamanaka

Hi victor,
could you please refer the Note 791379
Extract from a FAQ :
At the beginning of a synchronous RFC call the RfcAdapter (sender channel) builds up the XI request-message and will send this to the Adapter Engine with a timeout. After this it will wait till the response-message reaches or the timeout expires. In case of timeout the exception named above is thrown. The timeout used by RfcAdapter for synchronous calls can be configured for the whole RfcAdapter as a property of the RfcAdapter J2EE Service. To change it's value open the service properties sheet like and change the value of "syncMessageDeliveryTimeoutMsec". Notice that this value is specified in milliseconds. After changing the property store the properties by clicking the save-button (disk symbol) on top of the page.If a similar error messages is shown for a receiver channel the timeout setting is done in the inbound XI-Adapter of the Adapter Engine and not via the above described setting in the RFC-Adapter. The value of xiadapter.inbound.timeout.default from J2EE Service 'SAP XI Adapter: XI' is used in this case.
similar forum post :com.sap.aii.af.ra.ms.api.MessageExpiredException
see if you have not referred this already.
Regards,
Srinivas

Pkg com.sap.aii.proxy.framework.core don't exist even added in the JRE path

Hi All,
I am facing some error while activating the activity. I have checked-in the activity but getting the error while trying to activated the activity. there are two DC's in one of them i am gettign this error. i have not noticed this while check-in.
After checked in - i am not getting the any such option --Revert activitty or delete activity.
This activity is alreday closed.. what i can do with this activity?? After this error i am not able to activate any activity. I am getting the below error in all the activity.
package com.sap.aii.proxy.framework.core does not exist even though i have added this into the JRE path in NWDS. Do i need to import the same version file somewhere into J2ee server or somewhere else??
Regards,
Narpal

Hi,
javac ERROR: class file has wrong version 49.0, should be 48.0
This error means that the class file in question is being built with JDK1.5 (49), however it should be built with JDK1.4.2 (48).
In other words, as per the class the build expects a class file built with 1.4.2, but in your track JDK1.5 is configured for the build tool.
You need to therefore :
A.) review the CBS service settings, as most likely the parameters BUILDT_TOOL_JDK_HOME and JDK_HOME_PATHS are set up improperly.
B.) plus the build variant is incorrect in the track in question.
I'll refer below to the corresponding points with the letters A and B.
Some more explanation on the error:
If you check any class file with a hex editor, you'll see at the beginning of it this:
example: CA FE BA BE | 00 00 |00 31 ...
JDK 1.6 = 50 (0x32 hex)
JDK 1.5 = 49 (0x31 hex = (161)*3 + (160)*1 = 49)
JDK 1.4 = 48 (0x30 hex)
JDK 1.3 = 47 (0x2F hex)
JDK 1.2 = 46 (0x2E hex)
JDK 1.1 = 45 (0x2D hex)
On the first 4 bytes there's a magic number (CAFEBABE) which ensures this is a java class file, then on 2-2 bytes you'll see the minor and the major version (in this order). In the above example 00 00 | 00 31. This is what displayed as major.minor i.e. 49.0 what you can see in error messages. See also the attachment I've put to this thread minormajor.JPG.
More information on the class file structure:
http://java.sun.com/docs/books/jvms/second_edition/html/ClassFile.doc.html
For point A)
See the guide for doublechecking the CBS parameters
help.sap.com u2013 CBS Service Properties
http://help.sap.com/saphelp_nw70/helpdata/EN/53/75b3407e73c57fe10000000a1550b0/frameset.htm
Further explanation to the paramters
BUILD_TOOL_JDK_HOME and JDK_HOME_PATHS
BUILD_TOOL_JDK_HOME = <path to highest JDK>
JDK_HOME_PATHS = JDK1.3.1_HOME=<path of jdk131>;JDK1.4.2_HOME=<path of jdk142>;JDK1.5.0_HOME=<path of jdk150>JDK1.6.0_HOME=<path of jdk160>;default=<path of the JDK as default>
Some simple rules with examples:
- for BUILD_TOOL_JDK_HOME you simply enter the path to your JDK, e.g.: /opt/IBMJava2-amd64-142
- for JDK_HOME_PATHS you have to follow the scheme "key=value" e.g.: JDK_1.4.2_HOME=/opt/IBMJava2-amd64-142
- for BUILD_TOOL_JDK_HOME you always specify the highest JDK,
- for JDK_HOME_PATHS you list the available JDKs.
- JRE is not allowed, specify always JDK!
For point B)
Regarding the build variant in your track: check the page 13 for the paramter com.sap.jdk.home_path_key as per the guide :
How To... Setup an NWDI Track for Composition Environment Developments
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7014086d-3fd9-2910-80bd-be3417810c6f
Summary:
A. The first part of the solution is then to doublecheck the CBS service parameters. CBS service must be restarted after changes.
B. The second part is to doublecheck the build variant in the track (see the Build Variants tab on the Track Data tab on the CMS webui - Landscape Configurator).
I recommend you to have
A) BUILD_TOOL_JDK_HOME = <highest available JDK, I recommend here to set the path to JDK1.5>
JDK_HOME_PATHS = JDK1.4.2_HOME=<path of jdk142>;JDK1.5.0_HOME=<path of jdk150>;default=<path of the JDK as default, set it to the same path as you did for 1.4.2_HOME>
B) set the com.sap.jdk.home_path_key in the build variant to 1.4.2_HOME, or leave it for the default. Do not forget to set this build variant explicitly for >= 7.1 tracks to JDK1.5.0_HOME
I hope this helps.
Best Regards,
Ervin

BPM Issue com.sap.aii.af.ra.ms.api.RecoverableException:

Hi Experts,
I have successfully completed the following scenerio in BPM.
https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/1822. [original link is broken] [original link is broken] [original link is broken]
I am getting the following error in Messege mapping -> status -> Waiting !
Transmitting the message to endpoint http://XXXXXXX.XXXXXX.com:8000/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.net.UnknownHostException: XXXXXXX.XXXXX.com.
Experts , Please comment !
Regards,
Arnab .

Kunal,
the RFC destiantion LCRSAPRFC is ok.
Dharamveer,
Go to transaction SMICM --> Go to (Menu) --> parameters --> Display.
Move acorss the list of parametes displayed and you will find the Fully Qualified hostname.
I can see that the host name is not the right one . Is there any way to change from xxxxxx to xxxxxxx.yyyy.com . I think, changing this will solve the problem.
Sarvesh,
Check the HTTP port in SLD if it is correct. You can find the HTTP port by using Tcode SMICM
(Goto -->Services).
SLD ---> Business System ---> XI Server ---> Change the pipleline URL there accordingly
I hav checked the SLD.It is OK. But the HTTP port in SMICM is XXXXX where as I have to make it as SLD as XXXXXX.YYYYYY.com. can you tell me how?
Swathi,
I am looking into the LINK to find something productive.
Regards,
Arnab

Quality check in SAP AII

Hi All,
Need help to configure one scenario in SAP AII.
We are getting products manufactured from our contract manufacturer & initially we want to take the hierarchies coming from CMO into some intermediate quality status like "In QA". Then once it'll be released from QA, the status of the hierarchy IDs needs to be changed from "In QA" to "QA Released". We know in AII there are only 3 statuses like In stock,Not in stock and Decommission. But for our scenario we need some new statuses.
Could you please help to know how we can configure this in SAP AII?

FCP already contains both these functions:
Mark > Audio Peaks > Mark
View > Range Check

Reg. Changes in SAP AII D.C 4.0

Similar Messages

Maybe you are looking for