Reg. Cluster Table

Hi,
Basically I want to read the cluster TE in the PCL1 table,How is the process to go about it.
I just want to know from where the data in the cluster table gets accumulated.
Thanks in Advance,
Irfan Hussain

Hi Irfan,
Pl refer to my reply to your post in the ABAP forum.
Regards,
Suresh Datti

Similar Messages

Reg cluster and pooled tables

hi experts..
can u pls give the names of some cluster and pooled tables?
regards
Sellavel

Hello,
Pooled tables can be used to store control data (e.g. screen sequences, program parameters or temporary data). Several pooled tables can be combined to form a table pool. The table pool corresponds to a physical table on the database in which all the records of the allocated pooled tables are stored.
A001
A004
A005
A006
A007
A009
A010
A012
A015
A016
A017
A018
A019
A021
A022
Cluster tables contain continuous text, for example, documentation. Several cluster tables can be combined to form a table cluster. Several logical lines of different tables are combined to form a physical record in this table type. This permits object-by-object storage or object-by-object access. In order to combine tables in clusters, at least parts of the keys must agree. Several cluster tables are stored in one corresponding table on the database.
AUAA
AUAB
AUAO
AUAS
AUAT
AUAV
AUAW
AUAY
BSEC
BSED
BSEG
BSES
BSET
CDPOS
Vasanth

Reg: how to join more than one cluster table into one

Hi gurus
How to join more than one cluster table into one
amk

Hi,
You cannot join cluster tables
Best way is to select from the header table and then select from the item table table using for all entries of header table.
regards,
Advait

How to Extract Data for a Maintenance View, Structure and Cluster Table

I want to develop 3 Reports
1) in First Report
it consists only two Fields.
Table name : V_001_B
Field Name1: BUKRS
Table name : V_001_B
Field Name2: BUTXT
V_001_B is a Maintenance View
For this one I don't Find any Datasource
For this Maintenance View, How to Extract the Data.
2)
For the 2nd Report also it consists Two Fields
Table name : CSKSZ
Field Name1: KOSTL (cost center)
Table name : CSKSZ
Field Name2: KLTXT (Description)
CSKSZ is a Structure
For this one I don't Find any Datasource
For this Structure How to Extract the Data
3)
For the 3rd Report
in this Report all Fields are belonging to a Table BSEG
BSEG is a Cluster Table
For this one also I can't Find any Datasource,
I find very Few Objects in the Datasource.
For this One, How to Extract the Data.
Please provide me step by step procedure.
Thanks
Priya

Hi sachin,
I don't get your point can you Explain me Briefly.
I have two Fields for the 1st Report
BUKRS
BUTXT
In the 2nd Report
KOSTL
KLTXT
If I use 0COSTCENTER_TEXT Data Source
I will get KOSTL Field only
what about KLTXT
Thanks
Priya

How to get the data from a cluster table to BW

Dear All,
I want to extract the data from R/3 to BW by using 2 tables and one Cluster B2.
Actually my report contains some fields from PA2001, PA2002 and one cluster table B2 (Table ZES). Can I create View by using these 3 tables? If it is not possible how can I get the data from the cluster? Can I create generic datasource by using cluster tables directly?
In SE11 Transaction the Cluster (table ZES) is showing invalid table.
I referred some Forums, but no use.
Can any body tell me procedure to get the data from a cluster (table ZES) ?
Waiting for you results.
Thanks and regards
Rajesh

HI Siggi,
Thank you for your reply..
I am also planning to do FM to get the data. But it is saying that the Cluster table ZES does not exist (ZES is the the standard table, in SE11 also).
How can I use the Fields from the that table.?
What can I do now, can you please explain me about this point.
Waiting for your reply.
Thanks and Regards
Rajesh
Message was edited by:
rajesh

About cluster table in sql server or SAP

Hello Gurus,
we have a cluster table "KONV" in our sql server 2008 , is that feature for cluster table native feature in sql server or in sap?
because some professonal said there is no concept for cluster table in sql server just like oracle database. so please help me for
clarification.
Many thanks,

I agree, this is ABAP Dictionary specific way of data encapulation, not the DB type dependant one. Basically it stores the data in RAW or LRAW format.
Also be aware that we distinguish b/w [data clusters|http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3bf8358411d1829f0000e829fbfe/frameset.htm] and [cluster tables|http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm].
Regards
Marcin

Edit next extent size of the Cluster table

Hi Guys
I need to change the next extent size of the a table.
I ran se14 but i am not able to get into edit mode, because there is no button for edit mode.
Reason: Cluster table
Two questions:
1. Why there is no Edit button? Is it because this table doesnot exixt at DB level.
2. How can i change the next extent size for a Cluster table from sql prompt or from brtools if possible.
Information:
I am facing this issue only in DEV, QAS boxes, where as in Production its fine.
Regards
Ricky
Edited by: Ricky kayshap on Dec 9, 2008 3:52 PM

Hi,
Cluster Tables doesn't exist in DB, Because of that you can't make changes to extents at DB level.
if you experiencing some space issue. I woud suggest to check the underline Transparent tables and make changes to those.
hope this helps.
Kalyan.

How can I get data in flat file from Pool table and cluster table ?

Hi,
I am working in one Achiving project. My requirement is to get data into flat file from Cluster table and pool table.
Is there any tool avilable to download data into flat file from pool table and cluster table ?
if table name given in the selection screen then data will be downloaded into flat file.
waiting for quick response.
Best Regards,
Bansidhar

Data cannot be retrived directly form the cluster table
as the Cluster results are stored in Cluster Key say for example PCLkey
and form that Key we need to fetch the data
these clustes are not the part of PNP or PNPCE tables
for ur info kindly check

View on cluster table

hi all,
I am trying to create a view for the tables bkpg and bseg.but am unable to as the error is "bseg is cluster table".
can't we create view for cluster table. if can, how

You cannot create a view because BSEG is in a cluster table
For this reason SAP has provided some "secondary index" tables, look for :
     BSAD     Accounting: Secondary Index for Customers (Cleared Items)
     BSAK     Accounting: Secondary Index for Vendors (Cleared Items)
     BSAS     Accounting: Secondary Index for G/L Accounts (Cleared Items)
     BSID     Accounting: Secondary Index for Customers
     BSIK     Accounting: Secondary Index for Vendors
     BSIM     Secondary Index, Documents for Material
     BSIS     Accounting: Secondary Index for G/L Accounts
Regards

How to check data in a cluster table?

Hello
I am new to BW and SDN.
I have to see data in a cluster table.
I went to SE11, selected data type as KOMV, it displayed table, but data content button is greyed out.
Can someone please tell me how to view the data?
Thanks
Priya

Hi,
Thanks, I can see the data now.I am expecting that data should display in the 2LIS_VDKON extractor.There are two records for particular condition type.Item 10 and Item 20, but in RSA3, it is showing only one record for Item 20 and not showing for Item 10.
I have cleaned and filled the setup tables, but still no luck.
Can you please guide me, where else to look?
Thanks
Priya

How to extract data from cluster table

Hi, experts,
Here I want to extract change documents, which is from tables CDHDR(header) and CDPOS(line items). The problem is that CDPOS is a cluster table so that I can't create a view to develop a generic data source.
I have search on the forum and some one said generic data source based on function module was a choice, but I think coding FM is so complex, especially including delta implementation.
Could any one give me some advice? or give me some coding samples?
Thanks a lot!

Dear Sam,
I would suggest you to have a look at the function module CHANGEDOCUMENT_READ u2013 you can use this function module as a core in the developed function module for generic extractor. Unfortunately, the suggested function module can not handle import parameters for field names, so the strategy which can be applied here is to use this function module to fill the internal table based on restrictions on object class and table name and then go through filled internal table and delete records which are not relevant for fields KOFIZ or ABRSPERR.
As for delta implementation, would you please advise if delta relevant field based on timestamp generated on date and time of the change document is sufficient for your needs? If so then you can use fields UDATE and UTIME to generate timestamp on them including the field containing generated timestamp to the extract table. Next step here is to choose this field as delta relevant field in the Generic DataSource maintenance (TCode RSO2).
Please inform me if this solution suits you or if you have any questions or concerns regarding it.
My best regards,
Vadim

How to read data from a CLUSTER STRUCTURE not cluster table.

Hi,
how to read data from a CLUSTER STRUCTURE not cluster table.
regards,
Usha.

Hello,
A structre doesnt contain data.. so u cannot read from it. U need to find out table of that structure and read data from it.
Regards,
Mansi.

How to Extract data from Cluster table and transperant table

Hello BW Experts ,
I want to extract the data from cluster table BSEG and a transperant table BKPF .
The primary fields are BELNR , GJHAR and BUKRS.
the fields of table BKPF to extarct is BUDAT and fields of BSEG table is HKONT , BSCHL , ZUONR and POSID.
I can not create a view over these two tables as BSEG is a Cluster table.
Please guide me.
Regadrs ,
Amol.

hi Amol,
take a look Sigg's weblog
/people/siegfried.szameitat/blog/2005/09/29/generic-extraction-via-function-module
you can use RSAX_BIW_GET_DATA_SIMPLE as sample, there specified import parameters
FUNCTION RSAX_BIW_GET_DATA_SIMPLE.
""Lokale Schnittstelle:
*" IMPORTING
*" VALUE(I_REQUNR) TYPE SRSC_S_IF_SIMPLE-REQUNR
*" VALUE(I_DSOURCE) TYPE SRSC_S_IF_SIMPLE-DSOURCE OPTIONAL
*" VALUE(I_MAXSIZE) TYPE SRSC_S_IF_SIMPLE-MAXSIZE OPTIONAL
*" VALUE(I_INITFLAG) TYPE SRSC_S_IF_SIMPLE-INITFLAG OPTIONAL
*" VALUE(I_READ_ONLY) TYPE SRSC_S_IF_SIMPLE-READONLY OPTIONAL
*" TABLES
*" I_T_SELECT TYPE SRSC_S_IF_SIMPLE-T_SELECT OPTIONAL
*" I_T_FIELDS TYPE SRSC_S_IF_SIMPLE-T_FIELDS OPTIONAL
*" E_T_DATA STRUCTURE SFLIGHT OPTIONAL
*" EXCEPTIONS
*" NO_MORE_DATA
*" ERROR_PASSED_TO_MESS_HANDLER

How to fetch data for a struture from a cluster table

How can I fetch data for a struture, from a cluster table, based on the name of the structure?

Hi,
In order to read from Cluster DB Table use the following statement:
Syntax
IMPORT <f1> [ TO < g1 > ] <f2> [TO < g2 >] ...
FROM DATABASE <dbtab>(<ar>)
[CLIENT <cli>] ID <key>|MAJOR-ID <maid> [MINOR-ID <miid>].
This statement reads the data objects specified in the list from a cluster in the database <dbtab>.
You must declare <dbtab> using a TABLES statement. If you do not use the TO <gi> option, the
data object <fi> in the database is assigned to the data object in the program with the same
name. If you do use the option, the data object <fi> is read from the database into the field <gi>.
For <ar>, enter the two-character area ID for the cluster in the database. The name <key>
identifies the data in the database. Its maximum length depends on the length of the name field
in <dbtab>.
The CLIENT <cli> option allows you to disable the automatic client handling of a client-specific cluster database, and specify the client yourself. The addition must always come directly after the name of the database.
For Eg:
PROGRAM SAPMZTS3.
TABLES INDX.
DATA: BEGIN OF JTAB OCCURS 100,
COL1 TYPE I,
COL2 TYPE I,
END OF JTAB.
IMPORT ITAB TO JTAB FROM DATABASE INDX(HK) ID 'Table'.
WRITE: / 'AEDAT:', INDX-AEDAT,
/ 'USERA:', INDX-USERA,
/ 'PGMID:', INDX-PGMID.
SKIP.
WRITE 'JTAB:'.
LOOP AT JTAB FROM 1 TO 5.
WRITE: / JTAB-COL1, JTAB-COL2.
ENDLOOP.
Regards,
Neha
Edited by: Neha Shukla on Mar 12, 2009 1:35 PM

View cluster table child table calling problem!

Hi All,
I have created a cluster table with one table as header and one as item...
Header table : ZRAJ1
ITEM TABLE : ZRAJ2
ZRAJ1 :
ZPRODUCT
ZPROD_DESC
ZSTATUS
ZUSER
ZRAJ2:
ZPRODUCT
ZLABEL
This clearly shows that zraj2 is depending on ZRAJ1.
Created a cluster with these two tables.
Also, created events for ZRAJ1.
EVENT 05:
FORM create_entry.
yraj1-zuser = sy-uname.
ENDFORM.
EVENT 02:
FORM after_save.
IF yraj1-zstatus = 'L'.
    CALL TRANSACTION 'ZRAJ_VIEW'.
ENDIF.
ENDFORM.
If the Zstatus is "L" in ZRAJ1, a new transaction will be called to maintain the child table zraj2.
Trasnaction 'ZRAJ_VIEW'.
REPORT 'ZRAJ_VIEW'.
INITIALIZATION.
*declaration:
DATA : itab LIKE vimsellist OCCURS 0 WITH HEADER LINE.
START-OF-SELECTION.
*To call the MAintanence screen directly through the program:
CALL FUNCTION 'VIEW_MAINTENANCE_CALL'
    EXPORTING
      action                               = 'S'
CORR_NUMBER                          = ' '
GENERATE_MAINT_TOOL_IF_MISSING       = ' '
SHOW_SELECTION_POPUP                 = ' '
      view_name                            = 'YRAJ2'
NO_WARNING_FOR_CLIENTINDEP           = ' '
RFC_DESTINATION_FOR_UPGRADE          = ' '
CLIENT_FOR_UPGRADE                   = ' '
VARIANT_FOR_SELECTION                = ' '
COMPLEX_SELCONDS_USED                = ' '
   TABLES
      dba_sellist                          = itab
EXCL_CUA_FUNCT                       =
EXCEPTIONS
CLIENT_REFERENCE                     = 1
FOREIGN_LOCK                         = 2
INVALID_ACTION                       = 3
NO_CLIENTINDEPENDENT_AUTH            = 4
NO_DATABASE_FUNCTION                 = 5
NO_EDITOR_FUNCTION                   = 6
NO_SHOW_AUTH                         = 7
NO_TVDIR_ENTRY                       = 8
NO_UPD_AUTH                          = 9
ONLY_SHOW_ALLOWED                    = 10
SYSTEM_FAILURE                       = 11
UNKNOWN_FIELD_IN_DBA_SELLIST         = 12
VIEW_NOT_FOUND                       = 13
OTHERS                               = 14
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
it is calling, ok no issues but it is not allowing me to create a new entry in the child table zraj2.
Error: Table is locked by the user Raj.Checked in SM12 yes there is an lock entry for the table zrst(cluster), zraj1, zraj2.
Question :
By default in the execution of cluster will there be a lock in all the child table as well.
if so how to create new entries....
For your information : Standalone it is working fine.That is if i execute ZRAJ1 in SM31 i am able to create new entries..
Can any one provide some input on this............
Tahnks,
raj.

I don't know any direct transaction for your purpose, but you can use this program RSTXSCRP to download your form into the local file and than you can open it to view.
Regards,
Naimesh Patel

Reg. Cluster Table

Similar Messages

Maybe you are looking for