Reg ;Comm channel error
HI Guys
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '.fieldFixedLengths' or '.fieldSeparator' is missing
Thanks
Hi Kushee,
this is not difficult, just add one of the mentioned parameter
Regards,
Udo
Similar Messages
-
FTP - Receiver Comm channel error
Scenario: Send a file to a 3rd party via FTP adapter
Error: MONI is OK but comm channel monitor is in error state and error is displayed as:
An error occurred while connecting to the FTP server 'xxx.xx.xx.xxx:21'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 Permission denied on server. You are restricted to your account.'. For details, contact your FTP server vendor.
Things checked:
1> Our Firewall is configured to send the file from our system to 3rd party.
2> I could logon to 3rd party FTP server from web browser.
FYI, 3rd party FTP server is hosted on Yahoo.
Any ideas, why I am not able to FTP the file to 3rd party system?
Thanks
BhavenBhaven Shah wrote:>
> 2> I could logon to 3rd party FTP server from web browser.
It does not mean that XI will be able to access the FTP server.
You have to grant access for Adapter Engine user which is used for FTP communication.
Regards,
Jakub -
IDoc to File scenario... Receiver Comm Channel Error...
Hi Guru,
On the scenario IDoc to file, I'm encountering the ff error on my receiver comm channel (File Adapter)...
ttempt to access the 1 requested objects on 1 failed.
Detailed information:
com.sap.aii.ib.core.roa.RoaObjectAccessException:
Attempt to read object Adapter Metadata File | http://sap.com/xi/XI/System,
type AdapterMetaData from application REPOSITORY on
system REPOSITORY failed. Object does not exist. Detailed
informatio n: SWCV ID: << removed >>
does not exist in Enterprise Service Repository and
System Landscape Directory (ROA_MOA_NOTCOMPLETED)
<< removed >>
Attempt to access the 1 requested objects on 1 failed.
Detailed information:
com.sap.aii.ib.core.roa.RoaObjectAccessException:
Attempt to read object Adapter Metadata File | http://sap.com/xi/XI/System,
type AdapterMetaData from application REPOSITORY on
system REPOSITORY failed. Object does not exist. Detailed
informatio n: SWCV ID: e5a519a0766111dca2e8e95d0a115642
does not exist in Enterprise Service Repository and
System Landscape Directory (ROA_MOA_NOTCOMPLETED)
Attempt to access the 1 requested objects on 1 failed.
Detailed information:
com.sap.aii.ib.core.roa.RoaObjectAccessException:
Attempt to read object Adapter Metadata File | http://sap.com/xi/XI/System,
type AdapterMetaData from application REPOSITORY on
system REPOSITORY failed. Object does not exist. Detailed
informatio n: SWCV ID: e5a519a0766111dca2e8e95d0a115642
does not exist in Enterprise Service Repository and
System Landscape Directory (ROA_MOA_NOTCOMPLETED)
Please advise what possible solution can we apply?
Thanks.
Edited by: Rob Burbank on Dec 17, 2010 10:43 AM
Edited by: Rob Burbank on Jan 3, 2011 12:03 PMHi,
You can check File adapter metadata under Basis SWCV -->namespace http://sap.com/xi/XI/System in IR.
-Rahul -
Hi,
I have some unique error.
Could not process due to error: java.lang.IllegalStateException: Error during RETR epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 426 Unable to send data to TCP/IP. Data transfer ended.
Please let me know the issues.
Is it a data problem?
Other communication channels relevant to this FTP server is working fine.
Regards
KrishHi Krish,
It seems some error in connectivity. Its not related to data. Did you check at the same time for other interfaces also. They should also have same error if you tested at the same error.
Please check this link and shawn reply in the end. May be this might be one issue:
http://forums.iis.net/t/1105801.aspx
Regards,
---Satish -
Descrition of comm channel error in alerts
I have triggered alerts for adapter and integration engine ..
however I would like to have the descrition of the error that we get in Communication channel monitoring inot the alert..
ne idea?If you provide the below in your long text, the container SXMS_TO_ADAPTER_ERRLINES[] should give you what you need.
Adapter Errors:
Adapter Type: &SXMS_TO_ADAPTER_TYPE&
Adapter Error: &SXMS_TO_ADAPTER_ERRLINES[]&
http://help.sap.com/saphelp_nwpi711/helpdata/en/d0/d4b54020c6792ae10000000a155106/frameset.htm -
Error in receiver comm channel
Hi All,
I am working on scenario file to file with out IR.just picking up the file from sap app server and placing in target ftp server.
My sender comm channel is picking the file fine but when in receiver comm channel i am getiing error as
"Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Unknown payload format 0 in message"
"Attempt to process file failed with Unknown payload format 0 in message"
i have checked in content of the file it contains no special character. are any security is being maintained.
please advise on this.
Thanks,
BhaskarHi Jude,
I have checked in sender comm channel in message display tool under message content i am getting error as below.
messagecontent
message part [soap document]
500 Internal Server Error
SAP J2EE Engine/6.40
Application error occurred during request processing.
Details: Error [javax.servlet.ServletException: null], with root cause [java.lang.NullPointerException: null].
Exception id: [00145E474044003F000018AD00003E0D000471A1CBF6A02A]
what would be the error and how can i find it.
Is this basis related issue?
Thanks,
Bhaskar -
Mapping Error - Dump source message to file adapter comm channel
Hi
Does anyone know of a way to dump the source message to a file adapter comm channel if - and only if - the message fails during mapping. For example, we receive a message from a trading partner that lacks an element that is mandatory during the mapping. When the mapping fails, the source message is sent - as is - to a file adapter comm channel.
I don't need anything more than the source message i.e. no need for any errors etc... to be included.
The kicker.. I would like to do this without using BPM if at all possible.
Any ideas greatly appreciated. Thx, DuncanHey Ram,
Go to Integration Directory and open the Receiver Determination for your scenario.
Check the configured receiver services. They are in a table-like area in the middle of the screen.
In this table of configured receiver services for that particular Sender Service/Interface, you should have the system that normally receives that message (your ERP or any other application system) and the service that contains the receiver file comm channel that will receive the message in case of error.
Check help.sap.com for help on condition editor on receiver determinations.
Now, the issue. You can only check whether a field exists, you can't check whether it doesn't exist (There's only a "EXIST" operator, and no negative operator). Thus, you can only do the following: always send messages to File, but you can avoid messages that dont have field from being sent to App System. Yeah, that sucks...
But don't fear, young padawan! There is a possible workaround. =D
In your message mapping, do the following for that particular field:
If field exists (check with Exist and IF standard functions) just bypass the field. Else, map the field with an impossible value (like string "$CREATED$"). Then, in your receiver determination, you will do the following conditions:
for App System: If field =/= $CREATED$
for File Receiver: If field = $CREATED$
Now, if the field doesnt exist, it will have value $CREATED$, thus the message will be sent to File and not to App System. If the field exists, the message will be sent to App and not to File.
Try that out.
Regards,
Henrique. -
NFS Commnication channel errors for deleting and placing
Hi All,
I was trying File to file scenario.
I am picking the file from App server(AL11) using NFS Adapter and the processing Mode is Delete
In comm channel monitor it showing an error as
Sender channel error:
Error: File '/staging/INTERFACE/SAP/ca/kar370.txt' - deleting after processing failed
Same way while placing the file
Receiver channel error:
Error: Message processing failed: FileNotFoundException: /staging/INTERFACE/SAP/ca/test120110906-122051-980.txt (Permission denied)
Whether i dont have the permission to delete and place the file from and to the App server(AL11)?
What is the procedure in order to make it possible.
Thanks
SaiHi All,
Thanks to every one.
The problem is solved ,
Basis Guy has given the permissions, and i am able to place and delete the files .
Thanks
Sai -
Problem in File Receiver comm channel
Hi,
I can't see anything in the Recevier communication channel in the RWB > Component Monitoring>Comm. channel monitoring-->Comm. channels.
I do have selected my comm channel.Its showing the message as "Comm. channel is configured correctly and started". But I cant see msgID and Explanation or error. Even, I cant fine any info in Error log.
The diagnosis i did as follows. Let me know if u come across any thing.
Checked the logs in VA but i didnt found any information and is not upto date. Bad luck
*Recreated the Rcvr comm channel again and teste. Nohope.
In the MONI its showing successfull, but i cant see output at destination.
*cache is uptodate
I have checked the queues, nothing got stuck.All queues are clear.
*I cant restart the Server since it is in production.
Your suggestions are highly appreciated.
Thanks
SRINilesh,
All the things you mentioned are done by XI IS. FYI plz chk below..
Send binary file "/home/dpiadm/xi/tmp/passthru/EDI_250123.rpz", size 60, character encoding 8859_1 with QoS EO
2007-10-19 13:48:43 Success MP: Entering module processor
2007-10-19 13:48:43 Success MP: Processing local module localejbs/SFTPFileUploadDownloadAdapterModule
2007-10-19 13:48:43 Success 192.133.217.6 /XI/SFTPTest pimsp kuljasimsim EDI_250123.rpz /home/dpiadm/SridharRajuMahali /home/dpiadm/xi/tmp/passthru/ EDI_250123.rpz Enable
2007-10-19 13:48:43 Success EDI_250123.rpz
2007-10-19 13:48:43 Success SFTPOutBoundEDIFileToFile
2007-10-19 13:48:43 Success SFTP_Sender_File
2007-10-19 13:48:43 Success 8878c990-7e6b-11dc-8137-001a4b065b86
2007-10-19 13:48:43 Success SFTPServerNameOrIpAddress 192.133.217.6
2007-10-19 13:48:43 Success Indiashining.txt SFTPOutBoundEDIFileToFile SFTP_Sender_File 8878c990-7e6b-11dc-8137-001a4b065b86 SFTPOutBoundEEIFileToFile
UNDEFINED
2007-10-19 13:48:43 Success Host Key Verified
2007-10-19 13:48:43 Success Socket Opened for Transport and connected..
2007-10-19 13:48:43 Success SFTP SshClient is connected
2007-10-19 13:48:43 Success Authentication Method is Public Key
2007-10-19 13:48:43 Success Ssh2 Client is Connected and Authenticated
2007-10-19 13:48:43 Success pimsp kuljasimsim
2007-10-19 13:48:43 Success /XI/SFTPTest
2007-10-19 13:48:43 Success /XI/SFTPTest
2007-10-19 13:48:43 Success localFolder2 + dropFileName2 /home/dpiadm/xi/tmp/passthru/EDI_250123.rpz
Entering to download file
2007-10-19 13:48:43 Success Current Directory before LCD0 : /home/dpiadm
2007-10-19 13:48:43 Success Current Directory After LCD0 :/home/dpiadm/xi/tmp/passthru
2007-10-19 13:48:43 Success download completed
2007-10-19 13:48:43 Success MP: Processing local module localejbs/CallSapAdapter
2007-10-19 13:48:43 Success Application attempting to send an XI message asynchronously using connection File_http://sap.com/xi/XI/System.
2007-10-19 13:48:43 Success Trying to put the message into the send queue.
2007-10-19 13:48:43 Success Message successfully put into the queue.
2007-10-19 13:48:43 Success The application sent the message asynchronously using connection File_http://sap.com/xi/XI/System. Returning to application.
2007-10-19 13:48:43 Success MP: Leaving module processor
The message was successfully retrieved from the send queue.
2007-10-19 13:48:43 Success Confirmation mode test found. File sent.
2007-10-19 13:48:43 Success The message status set to DLNG.
2007-10-19 13:48:44 Success The message was successfully transmitted to endpoint http://quark:8005/sap/xi/engine?type=entry using connection File_http://sap.com/xi/XI/System.
2007-10-19 13:48:44 Success The message status set to DLVD.
2007-10-19 13:48:44 Success The message was successfully delivered.
Note:- I AM NOT ABLE TO SEE ANYTHING IN THE RCVR COMM CHANNEL(RWB).
any Idea about, where can I see the message if it got stuck in Integration server apart from logs
Thanks
Sri Raj -
Adapter engine field blank in File Comm channel (Sender)
Hi,
I am not getting any value in drop-down list of adapter engine in file adapter communication channel.System is allowing me to save the comm channel but when I am trying to create sender agreement, system is giving me following error
<b>Unable to find an associated SLD element (source element: SAP_XIIntegrationDirectory, [CreationClassName, SAP_XIIntegrationDirectory, string, Name, directory.s01., string], target element type: SAP_XIIntegrationServer)</b>
I m getting values of adapter engine when I select some other adpter like IDOC or RFC.
Please help...Hi,
1) Can you check your Post Installation.
2) Look for SAP NOTES.
3) Try cache refresh
a)Start transaction SXI_CACHE.
b)From the context menu XI Runtime Cache select Start Complete Cache Refresh.
If you still face issue try this .
Many actions require to access System Landscape Directory content from the Integration Builder. To optimize performance, this content is loaded into a cache so that the System Landscape Directory does not have to be accessed directly each time that System Landscape Directory content is required.
However, this cache is not automatically updated if changes are made to the content of the System Landscape Directory. For this reason that we delete the System Landscape Directory cache if changes have been made to content in the System Landscape Directory. The cache is then filled each time that the System Landscape Directory is accessed. If we log on to the Integration Builder after we have made a change in the SLD, we do not need to delete the SLD cache.
To clear the SLD cache, from the Integration Builder main menu, choose Environment ® Delete Cache for SLD Data.
Once we have deleted the cache for SLD data, accessing objects in the SLD may take longer than usual initially.
Regards
Agasthuri Doss -
Sync/Async - JMS receiver comm. channel not processing
I have a Sync/Async scenario (without bpm) in PI 7.11:
RFC -> PI -> JMS
whereby the JMS receiver comm. channel does not fully process the message.
More specifically, the RFC sender comm. channel gets a message in and passes the message to the JMS channel, but that JMS channel within the RWB comm. channel log only shows the entry:
- Message processing started
The odd twist to this is that when we bring the PI server down, then back up again, (or wait a period of time, still trying to determine this period) the FIRST message attempt does successfully get processed, i.e. the first message on that JMS receiver comm. channel RWB log shows as:
- Channel successfully processed the message: 08499236-387c-11e0-b002-000025bab2c2
- Stored the correlation ID 08499236-387c-11e0-b002-000025bab2c2 of the request JMS message: ID:c3e2d840d4d8d4f24040404040404040c754dc12d8b54ec6 correponding to the XI message: 08499236-387c-11e0-b002-000025bab2c2
- Message processing started
(but then because of an issue on the target system, no response comes back, so then we'll additionally get the log entry:
- Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: no message received
Any suggestions appreciated on what I can check here to try and figure this out. Possibly because the first message eventually errors out, it is stopping the other subsequent msgs from getting processed...
When I check the audit logs of a 'success' msg vs. a not-successful msg, the success msg has an entry (and subsequent entries) of:
14.02.2011 12:50:19 Information Transform: transforming the payload ...
14.02.2011 12:50:19 Information Transform: successfully transformed
14.02.2011 12:50:19 Information ROB: entering RequestOnewayBean
14.02.2011 12:50:19 Information ROB: forwarding the request message
14.02.2011 12:50:19 Information ROB: leaving RequestOnewayBean
14.02.2011 12:50:19 Information JMS Message was forwarded to the JMS provider succesfully."
14.02.2011 12:50:19 Information XMB Message as Binary was forwarded to the SAP XI JMS service succesfully.
14.02.2011 12:50:19 Information WRB: entering WaitResponseBean
14.02.2011 12:50:19 Information WRB: retrieving the message for 08499236-387c-11e0-b002-000025bab2c2 ...
wheras the non-success msg shows only:
14.02.2011 12:55:30 Information Transform: transforming the payload ...
14.02.2011 12:55:30 Information Transform: successfully transformed
14.02.2011 12:55:30 Information ROB: entering RequestOnewayBean
14.02.2011 12:55:30 Information ROB: forwarding the request message
14.02.2011 12:55:30 Information ROB: leaving RequestOnewayBean
So, we can see that the message is not "forwarded to the JMS provider..." in the non-success case.
And also the sxi_monitor shows these messages with a status of "Log version".
KeithHi Siddhesh - yes that was a while back and am trying to remember the resolution. I have implemented sync/async bridges (as well as async/sync bridges) successfully, so I don't mind checking your settings, particularly I am interested in the settings within the Module tab of the JMS receiver. I can then compare to mine if you'd like. Also if you can let me know what underlying queuing system in that target system (e.g. MQSeries?) that would be great.
Regards,
Keith -
Comm Channel - "requested resource does not exist"
Good day,
Can someone help me with this error I get. We have a file to file scenario and everything works fine but the file never gets created on the receiver side, all messages says successful but in the comm channel monitor for the receiver adapter I get "Message processing completed successfully" but if I click on the message ID it say's " The requested resource does not exist." [Screen Print|http://www.photostand.co.za/images/t6432okl1tu6wzubwymj.gif]
Thanks,
JanHi Jan,
Are you able to process messages from other interfaces? If not then there is an issue with the post installation. Please Check the SAP Note: 817920
If you are not able to process messages only for this interface then there might be a configuration issue..
Follow the link provided by the other SDNer. Please check and let us know the results.
Thanks, -
File adapter in comm.channel green, but no message collecting
Hello,
looks like this is something really at the roots.
Ok, we are in NW2004s PI 7.0.
One IDOC process is successfully implemented.
Now we started with a file to file communication!
File sender adapter is configured and shown in status green in comm.channel monitoring which would bring me to the idea that the comm.channel is configured well (To be sure we changed the directory path in the comm.channel to a wrong one which results in an error. Ok, corrected. Now all lamps are green). Comm channel is activated and polling.
But... nothing happens. The Adapter is not collecting the file in the source directory (existing) and there is no entry in monitoring on RWB or SXMB_MONI.
In Adapter monitoring all adapters except the JPR (red) are with a GREY lamp!
As we had an issue with activating the adapters (adapter monitoring before did not show any adapter (except JPR) ) two days ago we are not sure if the current issue belongs to a mistake in the configuration or in basis environment.
From XI 3.0 side we would expect that the adapter monitoring should show adapters used in green.
Do you have experience with such a behaviour?
Any help is welcome!
regards
DirkHi Bhavesh,
we are near to bumping our heads against the server.
In comm.channel:
directory is : / (as simple as possible)
file name is : *.001
The file in the directory is named it_test.001 so it should be catched.
What can we do wrong?
By the way: If we change the directory to /out which is existing we have an (file is in this directory too) error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 550 /out: The system cannot find the file specified. '.
Cache is fine!
regards
Dirk -
Erro in JMS receiver Comm Channel
Hi,
I am working on a scenario File(Sender) JMS (Receiver).The input is a text file The file sender polls this input file and the file sender CC does the content conversion and puts the XML message into the JMS Queue. But in the receiver JMS comm channel i get the error saying
Error sending message in sending to destination ABCF, the message message: TextMessage[null, <?xml version="1.0" encoding="...]: weblogic.jms.common.JMSException: Error sending mess
Please help me on thisHi,
Please have a look at your message in SXMB_MONI and see if the payload is correct.
Also have a look at the MDT (http://<server>:<port>/MDT) and see what errors occur for your message.
Regards,
Yaghya -
Hi,
I am getting the following error in soap receiver communication channel.
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: uatserver1.premierfoods.co.uk: java.net.UnknownHostException: uatserver1.sdd.co.uk
I tried individually copying the tarter url and pasting it in Internet Explorere. I did get the response.
I am not sure why I am getting an error.
I have given the target URL as http://<url>
Let me know what needs to be done on this.
Regards
Krish>>> tried individually copying the tarter url and pasting it in Internet Explorere. I did get the response.
Using IE and do the above test is just ping test and it's not complete test. Import the target WSDL in soap ui client or xmlspy and see whether you get the response.
Hints: After you successfully test in soap client tool or xmlspy ,use that wsdl url in the comm channel. Are u specifying soap action in the soap cc? If you dont find action or operation in the wsdl, then leave blank in action. This will help.
Maybe you are looking for
-
i brought an allbum on my ipad, when i went to download it on my laptop to pu onto my ipod its not in the purchased section however the album did download to my iphone automatically and i have been charged for it do i just purchase it on my laptop as
-
Unable to open excel f ile after data recovery
My hard drive was accidentally formatted , i tried Recover my files and get almost all my files but i have problem now i am unable to open all files from excel 2010. when tried these files show error. i have already tried http://social.technet.micros
-
How to use ANCESTOR function in BPC NW
I need to calculate averagre NetSales rate and so forth at product category level which is send level in the product hierarchy and three levels above base level product. I am using following MDX logic to calculate this average and store at every pro
-
Something called Snap.do has hijacked my browser. How do I get rid of it?
I have used Firefox for years and I never knowingly download unknown software. Recently I have been getting this Snap.Do search screen instead of my usual browser. Does anyone know from whence it came, is it dangerous, how do I get rid of it? Many th
-
Lockbox - not all payment applied
We have a unique situation here. When we upload our lockbox file, customer has two open items, one item was applied because the reference number matched, and the other payment was not applied because the reference number does not match. But instead o