Reg: Communication Channel Template

Hi All,
i have done file to file scenario using communication channel template.
What i understood from that is
i created Communication channel Template in IR, and in ID part also then
The sender agreement,receiver agreement,interface determination, receiver determination generated automatically.
is it the only use for Communication channel Template?
Is there any chance to import the Communication channel Template from IR to ID?
Regards,
Ajay

Hi ajay,
Yes this the only use.CCT is the template i.e. its a guide which tells how CC will be in ID.
to better understanding see sachin's weblog..in part 2..... u r doub't will be clear....
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
regards
biplab
***Reward with points if it helps you

Similar Messages

Problem in creating new communication channel template in IR

Hi experts,
I currently have problems with creating new communication channel template in Integration Repository. If I choose the New-Context (Adapter Objects-->Communication Channel Template) the dialog "CREATE OBJECT" is shown. After I have inserted the Name of my template I push the create button.
Then the following error occurs:
STOP: Internal error: Object cannot be changed in display mode
DETAILS: Internal error: Object cannot be changed in display mode(CANT_SET_MODIFIED).
So can anybody help me. Thanks for your help.
Best regards.
Mario

Hi Mario,
            This is genral problem appearing in PI 7.0 with SP12.
            Previously, i have the same problem.
            i.e STOP: Internal error: Object cannot be changed in display mode
DETAILS: Internal error: Object cannot be changed in display mode(CANT_SET_MODIFIED)
            Regarding this we raise an OSS note SAP people.
            they gave the suggestion that update with SP13.
          i discuss with basis team and install the SP13.
           now the problem is solved, i can able to create the Communication Channel Template.
Please award points, if it really help to u
Regards
Mahesh.

Communication Channel Template not used/found?

Hi,
I've created a new integration scenario. Below "adapter metadata" I've created a communication channel template for IDOC. Now if I try to configure my integration scenario I can't find/access/use that predefined communication channel template. I only can choose between the existing communication channel belonging to the business system already used. Why can't I use that communication channel template?
Thanks and regards!

Hi Christian,
check this:
http://help.sap.com/saphelp_nw04/helpdata/en/65/b11c409ce22402e10000000a1550b0/frameset.htm
Look for:
Creating a Communication Channel with a Communication Channel Template
Regards
Stefan

Regarding Integration Scenario and Communication Channel Template

Dear All,
1.What is the purpose of creating Integration Scenario in IR?Is it compulsary to create Integration Scenario in Every Case?(I mean Scenario not using BPM and Scenario using BPM).
2.What is the purpose of creating Communication Channel Template in IR?
3.If we create Communication Channel Template in IR?Do we need to utilize that Communication Channel Template for creating Communication Channel in ID?
4.IF we have created Integration Scenario in IR,and we transfered that Scenario from IR to ID,then Do we need to create Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination?or will they automatically created?
Please clarify my doubts.Thanks in Advance.
Regards,
Ramana.

Hi Ramana,
1.What is the purpose of creating Integration Scenario in IR?Is it compulsary to create Integration Scenario in Every Case?(I mean Scenario not using BPM and Scenario using BPM).
>>> For graphical overview about the sceanrio.It is not compulsary to create Integration Sceanrio.
2.What is the purpose of creating Communication Channel Template in IR?
>>> In integration scenario while creating the connection between two actions u need to specify the communication channel templates for Sender and Receiver.
3.If we create Communication Channel Template in IR?Do we need to utilize that Communication Channel Template for creating Communication Channel in ID?
>>>You can utilize these templates in ID.After completion to creating the configuration sceanrio need to modify the parameters of the channels.
4.IF we have created Integration Scenario in IR,and we transfered that Scenario from IR to ID,then Do we need to create Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination?or will they automatically created?
>>> From Tools-->Transfer Integration sceanrio from Integration Repository, From input help choose the sceanrio,Continue and click on Finish ,with the same name the configuration scenaro will create in ID.You need to follow the Confiuration steps like Assign services , here need to choose u r source & target business systems and Configure Connections in this step you can cross check the interfaces,mapping,channel templates involved in this sceanrio and Generate. It would automatically generates Sender Agreement,Receiver Agreement,Receiver Determination,Interface Determination. It would shown to u Generation Log, here you can check what are the objects generated and if there are any errors it would shown Number of errors.
By setting the appropriate channel parameters, activate all objects from change list.Now u can able to test the sceanrio.
However in latest version it is not compulsoary to create Integration sceanrio in IR and to the above things.You can use Configuration Wizard to do all these things or you can do these mauvally.
Hope it will helps to clear u r doubts.
Cheers
Veera
>>>Reward points,if it is needful.

In repository what is the use of communication channel templates

Hi People
what is the use of communication channel templates in integration repository? and when we are using that please tell me the ASAP
Thanks & Regards
shekar

HI,
The communication channel template is for the documentation purpose that will give the information about the sender and receiver communication channels in IR. So No need to goto ID and check the related CCs each time for every scenario.
You can preconfigure a communication channel with a communication channel template. You can use the communication channel template as a template to define a communication channel at configuration time.
If you want to create multiple communication channels with some identical configuration data, you should use a communication channel template.
Thanks
Swarup

Applying communication channel template

Hi
I have some module configurations setup for our EDI file channels. After Upgrade from PI 7.1 to PI 7.11 and changing the metadata from 7.1 to 7.11 all the module configs are lost. Currently i am manually doing all the module configs for all the file channels. I was wondering if i can use the Apply communication channel template option and copy the module configs from other comm channels. I am trying to do that, but i am not able to see the channels from which i have to apply the template.

Hi Kalyan Golla,
Please check [Link1|http://help.sap.com/saphelp_nwpi711/helpdata/en/bd/6af766076e384ebdce621d25161184/frameset.htm]
Module Configuration:-
On the Modules tab page, you can preconfigure modules. Note that all modules specified in a communication channel template are treated as a single parameter. This means that if you specify modules in the communication channel template and then use this communication channel template in a channel for which modules are already defined, all modules defined for the channel are overwritten.
[Link2|http://help.sap.com/saphelp_nwpi711/helpdata/en/48/d0066d05ae154ee10000000a421937/frameset.htm]
Edit Communication Channel:-
To apply a communication channel template from the Enterprise Services Repository, in the object menu of the communication channel, choose -> Communication Channel -> Apply Template . In the input help, you can select communication channel templates from all software component versions.
Regards,
Raghu_Vamsee
Edited by: Raghu Vamsee on Feb 14, 2011 5:02 PM

Communication channel template

Hello,
Whenever I am trying to use "apply template" in communication channel , I am getting error. When I check the template in the IR , I get the same error.
The template is for SOAP CC
Where i can check the issue?
Regards,
Vinithra

I think you might have imported older version Software Component.
refer this forum thread: Attempt to read object Adapter Metadata from application REPOSITORY
The above might help to solve the problem
Can you also let me know which software component you are trying use the channel template?
Also refer the notes:
669669
1309994
Regards
Ramesh
Edited by: Ramesh P on Dec 23, 2011 12:21 PM

REG: Communication Channel

Hi All,
Can we externally control the communication channnels ie( to active and inactive the channels externally without using runtime workbench or going to the configuration part).If yes please provide the details about it?
Thanks,
Siva

Yes you need required privileges for that /particular role for that
you can control that using the http://host:port/AdapterFramework/ChannelServlet?party=&service=&channel=&action=stop
before that you need to set ExternalControl on for your cc
Rajesh

Config-time substitution of Communication Channel values

I apologize in advance if this is explained elsewhere (or it's so blindingly obvious that nobody has asked). I promise I looked.
NW04 SP17
Is there a way to do parameter substitution on values defined in a communication channel template, based on the business system that the channel is going to be assigned to at config time?
In case I got the terminology wrong, here's what I want to do. I have some CC templates defined for some SOAP services. In the template definition, I can add Target URL and SOAP Action attributes and assign a value to them that will be available on the config side later on. I want to use this template against a number of technical systems, each of which is going to have a different host portion of the Target URL.
What I would like to have is a way for the CC template to have a 'generic' hostname that is substituted for at config time by the actual hostname of the business system that the channel is going to connect to.
Is there a way to do that? Or is that a stupid question?

Hi Michael,
I think there is a way to do this, depending on the XI SP level.
You might reference the following weblog, which uses the HTTP adapter as an example:
/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping
Then, in SAP Help, for JMS receiver config:
http://help.sap.com/saphelp_nw04/helpdata/en/29/5bd93f130f9215e10000000a155106/frameset.htm
Look under "Adapter-Specific Message Attributes" for JMS-specific parameters.
Regards,
Bill

REG: Receiver Communication channel

Hi All,
What are different receiver communication channels used to send data to a SAP system?
Thanks in advance,
Siva.

Hi,
in XI3.0/PI7.0 the available adapters from XI to R/3 are IDOC, RFC and XI for proxy communication.......
in PI7.1 all of the above and WS for Web Service Reliable Messaging is also available.........
Regards,
Rajeev Gupta

Reg SFTP Communication channel

Hello Fellow Consultants,
I have a situation here where in a folder there are 2 different file names Eg: v110-prod- chennai1PS & v110-prod-chennai9PS, now i want to know if can pick these 2 files with One SFTP sender communication channel.
I know this can be done with FTP with masking and stuff but i want to know if there is anyother way to do with Single sender SFTP Cc else i have to configure with Two Sftp channels
Regards
Vijay

Hi,
From single file adapter(1 communication channel) you can read multiple files.
Just use special charater in the file name scheme and activate the adapter specific parameters
Note: The internal structure of the files should be same
Regards,
Shradha

Reg:To control the communication channel actions externally

Dear All,
My scenario is File to File. Can anyone suggest me how to start and stop a communication channel without using communication channel monitoring in RWB and ATP in component monitoring,since there is no time frame has been set.
Thanks in Advance,
Lavanya .B

Hi,
Try this ... just a sample, modify as per your requirement.
import java.net.*;
import java.io.*;
class ExternalChannelControlPI
 public static void main(String[] args)
 try
 //Give Host Name, Port and Channel Name
 URL server = new URL("http://<Host:port>/AdapterFramework/ChannelAdminServlet?party=*&service=*&channel=" + <ChannelName> + "&action=start");
 //Hard code User Name & Password
 String userPassword = "<USERNAME>" + ":" + "<PASSWORD>";
 URLConnection uc=server.openConnection();
 uc.setRequestProperty ("Authorization", "Basic ");
 BufferedReader br = new BufferedReader(new InputStreamReader(uc.getInputStream()));
 String inputLine = "";
 String output = "";
 while (( inputLine = br.readLine()) != null)
 output+=inputLine;
 System.out.print(output);
 br.close();
 catch (Exception e)
 e.printStackTrace();

Missing adapter "templates" - am not able to create communication channel

Hi guys!
I need to create communication channel in the Directory, but I can't, because if I want to select channel type (soap, http, ...) I get screen with information: No objects found.
What could be wrong?
Thanx a lot for answer!
Olian

Olian,
In the Integration Repository, you should have a software component SAP BASIS, which contains the adapter metadata. If this is not there, you should import the software component according to the installation guide:
Importing the XI Content for Software Component Version SAP Basis 6.40 SR1
1. Copy XI3_0_SAP_BASIS_6.40_09_00.tpz from <Components DVD>/XI /XI_CONTENT to directory /usr/sap/<SAPSID>/SYS/global/xi/repository_server/import/
2. On your SAP XI host, call transaction SXMB_IFR.
3. Choose Repository (Design).
4. Choose → Tools → Import Design Objects
2. Choose the file /usr/sap/<SAPSID>/SYS/global/xi/repository_server/import XI3_0_SAP_BASIS_6.40_09_00.tpz
5. Import the file.

Reg jdbc communication channell proccessing

I have scenario i.e JDBC to RFC
but i need small calrification like is it possible to trigger the jdbc sender communication channel automatically whne the file tirggerd from the orcle Database
like without giving the any polling intervals CC should poll when the file triggerd.
i am not going to use that file its just a flag to start the communication channel
can we achive this through OS commands ???
thanks in advance....
Edited by: katakoti on Nov 9, 2011 2:18 PM
Edited by: katakoti on Nov 9, 2011 2:19 PM
Edited by: katakoti on Nov 9, 2011 2:20 PM

can we achive this through OS commands ???
Yes you can write script and control the channels externally like give start or stop command at your specified requirement time.
Please see this link
Control Communication Channels Externally without using RWB
Also you can use wget or curl command in the script followed by http url string.
Example:
wget http(s)://host:port/AdapterFramework/ChannelAdminServlet?party=party&service=service&channel=channel&action=start

Reg- End of communication channel

Dears,
I have a remote database which is located in other region, But i can ping the database at client place and Even i can able to connect with Sqlplus..and i can able to create user.
But.
If i check the userlist from dba_users it will wait and it throw error end of file communication channel how do i rectify it?

No version number.
No DDL.
No error message.
No information as to how you are connecting to the remote db.
I guess your car won't start because you forgot to turn the key.
If you want help post information that someone can use to help you.

Reg: Communication Channel Template

Similar Messages

Maybe you are looking for