REG: Communication Channel

Hi All,
Can we externally control the communication channnels ie( to active and inactive the channels externally without using runtime workbench or going to the configuration part).If yes please provide the details about it?
Thanks,
Siva

Yes you need required privileges for that /particular role for that
you can control that using the http://host:port/AdapterFramework/ChannelServlet?party=&service=&channel=&action=stop
before that you need to set ExternalControl on for your cc
Rajesh

Similar Messages

Reg: Communication Channel Template

Hi All,
i have done file to file scenario using communication channel template.
What i understood from that is
i created Communication channel Template in IR, and in ID part also then
The sender agreement,receiver agreement,interface determination, receiver determination generated automatically.
is it the only use for Communication channel Template?
Is there any chance to import the Communication channel Template from IR to ID?
Regards,
Ajay

Hi ajay,
Yes this the only use.CCT is the template i.e. its a guide which tells how CC will be in ID.
to better understanding see sachin's weblog..in part 2..... u r doub't will be clear....
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
regards
biplab
<i>***Reward with points if it helps you</i>

REG: Receiver Communication channel

Hi All,
What are different receiver communication channels used to send data to a SAP system?
Thanks in advance,
Siva.

Hi,
in XI3.0/PI7.0 the available adapters from XI to R/3 are IDOC, RFC and XI for proxy communication.......
in PI7.1 all of the above and WS for Web Service Reliable Messaging is also available.........
Regards,
Rajeev Gupta

Reg SFTP Communication channel

Hello Fellow Consultants,
I have a situation here where in a folder there are 2 different file names Eg: v110-prod- chennai1PS & v110-prod-chennai9PS, now i want to know if can pick these 2 files with One SFTP sender communication channel.
I know this can be done with FTP with masking and stuff but i want to know if there is anyother way to do with Single sender SFTP Cc else i have to configure with Two Sftp channels
Regards
Vijay

Hi,
From single file adapter(1 communication channel) you can read multiple files.
Just use special charater in the file name scheme and activate the adapter specific parameters
Note: The internal structure of the files should be same
Regards,
Shradha

Reg:To control the communication channel actions externally

Dear All,
My scenario is File to File. Can anyone suggest me how to start and stop a communication channel without using communication channel monitoring in RWB and ATP in component monitoring,since there is no time frame has been set.
Thanks in Advance,
Lavanya .B

Hi,
Try this ... just a sample, modify as per your requirement.
import java.net.*;
import java.io.*;
class ExternalChannelControlPI
     public static void main(String[] args)
          try
               //Give Host Name, Port and Channel Name
               URL server = new URL("http://<Host:port>/AdapterFramework/ChannelAdminServlet?party=*&service=*&channel=" + <ChannelName> + "&action=start");
               //Hard code User Name & Password
               String userPassword = "<USERNAME>" + ":" + "<PASSWORD>";
               URLConnection uc=server.openConnection();
               uc.setRequestProperty ("Authorization", "Basic ");
               BufferedReader br = new BufferedReader(new InputStreamReader(uc.getInputStream()));
               String inputLine = "";
               String output = "";
                while (( inputLine = br.readLine()) != null)
                    output+=inputLine;
                       System.out.print(output);
               br.close();
          catch (Exception e)
               e.printStackTrace();

Reg jdbc communication channell proccessing

I have scenario i.e JDBC to RFC
but i need small calrification like is it possible to trigger the jdbc sender communication channel automatically whne the file tirggerd from the orcle Database
like without giving the any polling intervals CC should poll when the file triggerd.
i am not going to use that file its just a flag to start the communication channel
can we achive this through OS commands ???
thanks in advance....
Edited by: katakoti on Nov 9, 2011 2:18 PM
Edited by: katakoti on Nov 9, 2011 2:19 PM
Edited by: katakoti on Nov 9, 2011 2:20 PM

can we achive this through OS commands ???
Yes you can write script and control the channels externally like give start or stop command at your specified requirement time.
Please see this link
Control Communication Channels Externally without using RWB
Also you can use wget or curl command in the script followed by http url string.
Example:
wget http(s)://host:port/AdapterFramework/ChannelAdminServlet?party=party&service=service&channel=channel&action=start

Reg- End of communication channel

Dears,
I have a remote database which is located in other region, But i can ping the database at client place and Even i can able to connect with Sqlplus..and i can able to create user.
But.
If i check the userlist from dba_users it will wait and it throw error end of file communication channel how do i rectify it?

No version number.
No DDL.
No error message.
No information as to how you are connecting to the remote db.
I guess your car won't start because you forgot to turn the key.
If you want help post information that someone can use to help you.

Selected communication channel IDoc_AAE_In is assigned to the wrong adapter type IDoc_AAE Supported adapter types: HTTP, SOAP, XI, WS.

Hi Team,
I have a problem.
I have a scenario using the the Sender Adapter. HTTP_AAE
When I am trying to use the function "Display WSDL" I am receiving the following.
Error:
Selected communication channel HTTP_AAE_In_SAPII is assigned to the wrong adapter type HTTP_AAE Supported adapter types: HTTP, SOAP, XI, WS.
Somebody knows this problem?
Thanks

Hi,
am also getting same error.
think that feature is not supported.
have look on Configuring the Java HTTP Adapter on the Sender Channel - Advanced Adapter Engine - SAP Library for sending a message.
reg,avinash M

Open and close communication channel in one link

Hello,
I implement with successful the scenario that described in this blog:
Control Communication Channels Externally without using RWB
Right now I use with this link to start the CC
http://aaaa:50000/AdapterFramework/ChannelAdminServlet?party=*&service=Open_Friday_Service_Sender&channel=Open_Friday_Sender&action=start
And with this link to stop the CC
http://aaaa:50000/AdapterFramework/ChannelAdminServlet?party=*&service=Open_Friday_Service_Sender&channel=Open_Friday_Sender&action=stop
I looking for the way to start and stop the communication channel in one link.
Elad

hi elan
i think you need to write an abap program and schedule it..
abap program will call this HTTP link as The URL has no dependency on where it is called.
regards
kummari

Using a variable in communication channel

Hi,
I have a lot of Communication Channels looking for files in the same directory. This directory's path will be changed soon and so I assume I'll have to change all my Communication Channels.
I was wondering whether there was a means of using a variable for the Source Directory in order to just have to change its value where it is defined and not every where it is used...
Regards
Yann

Hi,
Is this a sender file adapter? or a receiver file adapter?
You can make a change / make the receiver file adapter's directory dynamic by setting the value during runtime in the mapping.
Use this blog and the code in the blog to acheive this,
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Sender File adapter, I dont think this is possible.
Regards,
Bhavesh

Error in the SOAP Receiver communication channel

Hi ,
My scenario is RFC - to -SOAP (synchronous ) i have specified the TARGET URL inthe SOAP receiver comminication chanel.. but while testing the interface by providing the test data from R/3 .. I'm not getting any Respose.. ..
If I check in the SXMB_MONI in i'm getting the following message .. but the URL whicjh i provided that is fine.. but my doubt is through XI may be it's not able to connect the Target System... .. so, please suggest me...
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: www.webservicex.net</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
regards
Jain

By default, the SOAP adapter sends the SOAP message with the content type text/xml.
When you check "Do not use SOAP envelope", the default contnet type is application/xml.
You can change the content type like this: Go to the SOAP receiver communication channel module tab. Add the module "localejbs/AF_Modules/MessageTransformBean" before the standard module. Add the parameter name Transform.ContentType and value text/xml.
Check out this
/people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi
One way of testing ur scenario
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
Also have a look here
SAP Note 856597
reward points if solution found helpfull
regards
chandrakanth

How to set up the communication channel for third party idoc

Hello,
I am trying to send an idoc from an sap 4.6c system to an third party system. The third party system is supporting idcos with trfc.
My problem is to set up the communication channel in the integration builder (configuration) for the third party system. The idoc is waitung in XI to transport.
My settings are:
adapter type: idoc
transport protocol: idoc
message protocol: idoc
adapter engine: integration engine
rfc destination: xyz (is working fine)
interface version: sap release 4.0 or higher
port: ??
sap release 46c
My problem is the port. should i set up a port in idx1? But the third party is not an sap system and so i dont have a client.
On the xi i have defined a port in transaction we21 (transactional rfc) for the third party with my rfc destination xyz. But if i enter that port in communication channel i got error messages.
Thanks for any help.

Hi Christian,
yes, you have to mainztain that port in idx1.
First ypi load the rfc-metadata from an SAP referenzsystem and afterwards copy this metadata to the third party port.
For further details check the onlinedocumentation "IDoc Processing with the IDoc Adapter" XI -> runtime -> adapter
Good luck,
Holger

Convrtd to Invterval Part- ORA-03113: end-of-file on communication channel

Hi all,
I had a table as Interval Partitioned. In order to create XML- Xpath indexes on it, I converted it to Range Partitioned table.
I am able to create the XPATH indexes but I get the error: ORA-03113: end-of-file on communication channel
- When I revert the code to Interval Partitioned without the XMLIndex, it works fine(although takes time as no XML Index)
- When I convert table to non partitioned table, create the XML Index, it works fine.
But I need the partitons, so when I create the partitioned table I get the error.
CREATE TABLE INT_PART_TABLE
DB_ID VARCHAR2(10 BYTE),
xML_mESSAGE SYS.XMLTYPE,
LOAD_TIMESTAMP TIMESTAMP(6)
XMLTYPE xML_mESSAGE STORE AS BINARY XML
PARTITION BY RANGE (LOAD_TIMESTAMP)
PARTITION MAX VALUES LESS THAN (TIMESTAMP' 2013-06-01 00:00:00')
TABLESPACE CSTR_STG_DATA
NOCOMPRESS
NOCACHE
ENABLE ROW MOVEMENT;
BEGIN
DBMS_XMLINDEX.dropparameter('Indx_Par');
END;
BEGIN
DBMS_XMLINDEX.REGISTERPARAMETER(
'Indx_Par',
'PATH TABLE Table1
PATHS (INCLUDE ( /abc:field1/xyz:field2
/abc:field1/def:field2
NAMESPACE MAPPING ( xmlns:abc="ABCD"
xmlns:def="DEFG"
xmlns:xyz="XYZA"
end;
create index INDX_XPATHS on "INT_PART_TABLE" (XML_MESSAGE) indextype is xdb.xmlindex
parameters ('PARAM Indx_Par') local;
Now if I execute the following statement in
SELECT T.xML_mESSAGE
FROM INT_PART_TABLE1 T
WHERE XMLEXISTS (
declare namespace abc="ABCD";
declare namespacedef="DEFG";
declare namespace xyz="XYZA";
let $tt as xs:boolean := fn:exists($p/main/id = ("144283","9085802")])
return if ($tt) then true()
else ()'
PASSING T.xML_mESSAGE AS "p");
- Is there any other way of writing this Select statement, which may work?
- Any other thing I need to take care of when defining the table and partitions script so that I don't get this error?

Hi,
I think it's time you give a clear (and working) test case so that we can safely try to reproduce the issue.
What you've given so far has syntax error and name mismatch.
So please :
- database version (SELECT * FROM v$version)
- complete sequence of DLLs
- some sample XML documents (it doesn't have to be the real ones, but at least something realistic)
Thanks in advance.
declare namespace abc="ABCD";
declare namespacedef="DEFG";
declare namespace xyz="XYZA";
let $tt as xs:boolean := fn:exists($p/main/id = ("144283","9085802")])
return if ($tt) then true()
else ()'Why all that stuff? You don't have to return a boolean.
The following works for me on 11.2.0.3 :
SQL> CREATE TABLE int_part_table (
2    db_id          VARCHAR2(10)
3 , xml_message    XMLTYPE
4 , load_timestamp TIMESTAMP
5 )
6 XMLTYPE xml_message STORE AS BINARY XML
7 PARTITION BY RANGE (load_timestamp) (
8    PARTITION MAX VALUES LESS THAN (timestamp '2013-06-01 00:00:00')
9 )
10 NOCOMPRESS
11 NOCACHE
12 ENABLE ROW MOVEMENT;
Table created
SQL> insert into int_part_table values (1, xmltype('<main><id>144283</id></main>'), sysdate);
1 row inserted
SQL> insert into int_part_table values (1, xmltype('<main><id>9085802</id></main>'), sysdate);
1 row inserted
SQL> insert into int_part_table values (1, xmltype('<main><id>1</id></main>'), sysdate);
1 row inserted
SQL> commit;
Commit complete
SQL> create index int_part_table_uix on int_part_table (xml_message)
2 indextype is xdb.xmlindex
3 parameters (
4 'PATH TABLE INT_PART_TABLE_PT
5 PATHS ( INCLUDE ( /main/id ) )')
6 local;
Index created
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLExists(
4         '/main[id=("144283","9085802")]'
5         PASSING xml_message
6       )
7 ;
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 3517234298
| Id | Operation                              | Name                         | Rows | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
|   0 | SELECT STATEMENT                       |                              |     1 |   155 |    34   (6)| 00:00:01 |       |       |
|   1 | NESTED LOOPS                          |                              |     1 |   155 |    34   (6)| 00:00:01 |       |       |
|   2 |   VIEW                                 | VW_SQ_1                      |     1 |    25 |    32   (4)| 00:00:01 |       |       |
|   3 |    HASH UNIQUE                         |                              |     1 |    47 |         |             |       |       |
|* 4 |     HASH JOIN SEMI                     |                              |     1 |    47 |    32   (4)| 00:00:01 |       |       |
|   5 |      PARTITION SYSTEM SINGLE           |                              |     2 |    90 |     2   (0)| 00:00:01 |     1 |     1 |
|* 6 |       TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT            |     2 |    90 |     2   (0)| 00:00:01 |     1 |     1 |
|* 7 |        INDEX SKIP SCAN                 | SYS117585_INT_PART__PIKEY_IX |     3 |       |     1   (0)| 00:00:01 |     1 |     1 |
|   8 |      COLLECTION ITERATOR PICKLER FETCH | XQSEQUENCEFROMXMLTYPE        | 8168 | 16336 |    29   (0)| 00:00:01 |       |       |
|* 9 |   TABLE ACCESS BY USER ROWID           | INT_PART_TABLE               |     1 |   130 |     1   (0)| 00:00:01 | ROWID | ROWID |
Predicate Information (identified by operation id):
   4 - access("SYS_P3"."VALUE"=SYS_XQ_UPKXML2SQL(VALUE(KOKBF$),2,1,0) AND
              SUBSTRB("VALUE",1,1599)=SUBSTRB(SYS_XQ_UPKXML2SQL(VALUE(KOKBF$),2,1,0),1,1599))
   6 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
   7 - access("SYS_P3"."PATHID"=HEXTORAW('704E') )
       filter("SYS_P3"."PATHID"=HEXTORAW('704E') )
   9 - filter("ITEM_6"=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"INT_PART_TABLE".ROWID))
Note
   - Unoptimized XML construct detected (enable XMLOptimizationCheck for more information)
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLExists(
4         '/main[id="144283" or id="9085802"]'
5         PASSING xml_message
6       )
7 ;
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 3748936130
| Id | Operation                                | Name                         | Rows | Bytes | Cost (%CPU)| Time     | Pstart| Pstop |
|   0 | SELECT STATEMENT                         |                              |     1 |   155 |    11 (10)| 00:00:01 |       |       |
|   1 | NESTED LOOPS                            |                              |     1 |   155 |    11 (10)| 00:00:01 |       |       |
|   2 |   VIEW                                   | VW_SQ_1                      |     2 |    50 |     8   (0)| 00:00:01 |       |       |
|   3 |    HASH UNIQUE                           |                              |     2 |   180 |         |             |       |       |
|   4 |     CONCATENATION                        |                              |       |       |         |             |       |       |
|   5 |      NESTED LOOPS                        |                              |       |       |         |             |       |       |
|   6 |       NESTED LOOPS                       |                              |     1 |    90 |     4   (0)| 00:00:01 |       |       |
|   7 |        PARTITION SYSTEM SINGLE           |                              |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
|* 8 |         TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT            |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
|* 9 |          INDEX SKIP SCAN                 | SYS117585_INT_PART__PIKEY_IX |     3 |       |     1   (0)| 00:00:01 |     1 |     1 |
| 10 |        PARTITION SYSTEM SINGLE           |                              |     1 |       |     1   (0)| 00:00:01 |     1 |     1 |
|* 11 |         INDEX RANGE SCAN                 | SYS117585_INT_PART__PIKEY_IX |     1 |       |     1   (0)| 00:00:01 |     1 |     1 |
|* 12 |       TABLE ACCESS BY LOCAL INDEX ROWID | INT_PART_TABLE_PT            |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
| 13 |      NESTED LOOPS                        |                              |       |       |         |             |       |       |
| 14 |       NESTED LOOPS                       |                              |     1 |    90 |     4   (0)| 00:00:01 |       |       |
| 15 |        PARTITION SYSTEM SINGLE           |                              |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
|* 16 |         TABLE ACCESS BY LOCAL INDEX ROWID| INT_PART_TABLE_PT            |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
|* 17 |          INDEX SKIP SCAN                 | SYS117585_INT_PART__PIKEY_IX |     3 |       |     1   (0)| 00:00:01 |     1 |     1 |
| 18 |        PARTITION SYSTEM SINGLE           |                              |     1 |       |     1   (0)| 00:00:01 |     1 |     1 |
|* 19 |         INDEX RANGE SCAN                 | SYS117585_INT_PART__PIKEY_IX |     1 |       |     1   (0)| 00:00:01 |     1 |     1 |
|* 20 |       TABLE ACCESS BY LOCAL INDEX ROWID | INT_PART_TABLE_PT            |     1 |    45 |     2   (0)| 00:00:01 |     1 |     1 |
|* 21 |   TABLE ACCESS BY USER ROWID             | INT_PART_TABLE               |     1 |   130 |     1   (0)| 00:00:01 | ROWID | ROWID |
Predicate Information (identified by operation id):
   8 - filter("SYS_P5"."VALUE"='9085802' AND SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1 AND SUBSTRB("VALUE",1,1599)='9085802')
   9 - access("SYS_P5"."PATHID"=HEXTORAW('704E') )
       filter("SYS_P5"."PATHID"=HEXTORAW('704E') )
11 - access("SYS_P5"."RID"="SYS_P3"."RID" AND "SYS_P3"."PATHID"=HEXTORAW('0BBD') AND
              "SYS_P3"."ORDER_KEY"<"SYS_P5"."ORDER_KEY")
       filter(SYS_ORDERKEY_DEPTH("SYS_P3"."ORDER_KEY")+1=SYS_ORDERKEY_DEPTH("SYS_P5"."ORDER_KEY") AND
              TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"SYS_P3"."RID")=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE_PT",0,7,65535,ROWI
              D) AND "SYS_P5"."ORDER_KEY"<SYS_ORDERKEY_MAXCHILD("SYS_P3"."ORDER_KEY"))
12 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
16 - filter("SYS_P5"."VALUE"='144283' AND SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1 AND SUBSTRB("VALUE",1,1599)='144283' AND
              (LNNVL("SYS_P5"."VALUE"='9085802') OR LNNVL("SYS_P5"."PATHID"=HEXTORAW('704E') ) OR
              LNNVL(SYS_XMLI_LOC_ISNODE("SYS_P5"."LOCATOR")=1) OR LNNVL(SUBSTRB("VALUE",1,1599)='9085802')))
17 - access("SYS_P5"."PATHID"=HEXTORAW('704E') )
       filter("SYS_P5"."PATHID"=HEXTORAW('704E') )
19 - access("SYS_P5"."RID"="SYS_P3"."RID" AND "SYS_P3"."PATHID"=HEXTORAW('0BBD') AND
              "SYS_P3"."ORDER_KEY"<"SYS_P5"."ORDER_KEY")
       filter(SYS_ORDERKEY_DEPTH("SYS_P3"."ORDER_KEY")+1=SYS_ORDERKEY_DEPTH("SYS_P5"."ORDER_KEY") AND
              TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"SYS_P3"."RID")=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE_PT",0,7,65535,ROWI
              D) AND "SYS_P5"."ORDER_KEY"<SYS_ORDERKEY_MAXCHILD("SYS_P3"."ORDER_KEY"))
20 - filter(SYS_XMLI_LOC_ISNODE("SYS_P3"."LOCATOR")=1)
21 - filter("ITEM_2"=TBL$OR$IDX$PART$NUM("DEV"."INT_PART_TABLE",0,7,65535,"INT_PART_TABLE".ROWID))I asked in one of your other threads if /main/id was unique per XML document.
If so, you can use a simple function-based index instead of the XMLIndex :
SQL> drop index int_part_table_uix;
Index dropped.
SQL> create index int_part_table_ix1 on int_part_table (
2    xmlcast(
3      xmlquery('/main/id' passing XML_MESSAGE returning content)
4      as varchar2(10)
5    )
6 );
Index created.
SQL> SELECT xml_message
2 FROM int_part_table
3 WHERE XMLCast(
4          XMLQuery('/main/id' PASSING xml_message RETURNING CONTENT)
5          AS VARCHAR2(10)
6        )
7 IN ('144283', '9085802');
XML_MESSAGE
<main>
<id>144283</id>
</main>
<main>
<id>9085802</id>
</main>
Execution Plan
Plan hash value: 2864653096
| Id | Operation                           | Name               | Rows | Bytes | Cost (%CPU)| Time | Pstart| Pstop |
|   0 | SELECT STATEMENT                    |                    |     2 |   236 |     2   (0)| 00:00:01 |       |       |
|   1 | INLIST ITERATOR                    |                    |       |       |            |       | |       |
|   2 |   TABLE ACCESS BY GLOBAL INDEX ROWID| INT_PART_TABLE     |     2 |   236 |     2   (0)| 00:00:01 |     1 |     1 |
|* 3 |    INDEX RANGE SCAN                 | INT_PART_TABLE_IX1 |     2 |       |     1   (0)| 00:00:01 |       |       |
Predicate Information (identified by operation id):
   3 - access(CAST(EXTRACTVALUE(SYS_MAKEXML(0,"SYS_NC00003$"),'/main/id',null,0,0,524293,1073874944) AS
              varchar2(10)   )='144283' OR CAST(EXTRACTVALUE(SYS_MAKEXML(0,"SYS_NC00003$"),'/main/id',null,0,0,524293,1073874944
              ) AS varchar2(10)   )='9085802')

Error in Receiver Communication Channel in FCC

I have a simple scenario of Proxy to File. I have to just one field in complete row. So my structure is as below : MT_RecordIB -> Records. So my XSD looks like this :
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://XXXl.com/INF31018/SAPSerOrd_DaysIn" targetNamespace="http://hnwl.com/INF31018/SAPSerOrd_DaysIn">
   <xsd:element name="MT_RecordIB" type="DT_RecordIB" />
   <xsd:complexType name="DT_RecordIB">
      <xsd:sequence>
         <xsd:element name="Records" type="xsd:string" />
      </xsd:sequence>
   </xsd:complexType>
</xsd:schema>
I have used FCC and the parameters are :
Recordset Structure                                  Records
Records.fieldSeparator             'nl'
But I am getting following error in Receiver Communication Channel :
Failed to process message content. Reason: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:MT_RecordIB' found in document', probably configuration error in file adapter (XML parser error)' (Software version: 3.0.21)
Thanks,
Pankaj Singh

Hey Pankaj,
Your content conversion parameter might be configured improperly.
Refer this blogs
/people/shabarish.vijayakumar/blog/2007/08/03/file-adapter-receiver--are-we-really-sure-about-the-concepts
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
Refer the following threads for your problem
[ Unknown structure 'ns0:MT_dbglgtr_FileName' found in document'|Unknown structure 'ns0:MT_dbglgtr_FileName' found in document']
Rgds
Ramesh

Need to use only one sender and receiver communication channel.

Hello Experts.
I have a scenario where in I have to use only one sender and receiver communication channel to push files from different source directories to different receiver directories.
For Eg;
Sender
D://dir1/file1 --->                  E://dir1/File1
F://dir2/file2 ---->                 G://dir2/file2
H://dir3/file3----->                 I://dir3/file3.
Can this be achieved by using pass through scenario?
Please let me know if the requirement is not clear.
Thanks in advance.
Advit Ramesh

Hi Advit,
I think it is possible. You have to use the Advanced Selection for Source file in the sender channel to define multiple files to be picked up. Also, the Dynamic configuration must also be enabled and used in the mapping so you can manipulate the target directory and target file name based on your source files.
For Polling from multiple directories:
http://wiki.scn.sap.com/wiki/display/XI/File+Sender+Adapter+-+Polling+Multiple+Directories
Dynamic Configuration:
Dynamic file name and directory in Receiver File Adapter - summary of possibilities - Process Integration - SCN Wiki

REG: Communication Channel

Similar Messages

Maybe you are looking for