Reg confirming stock in sales orders

Hi Gurus:
I am not able to confirm stock in the sales order. Normally it is because of 2 reasons:
1. Either the stock would not be available.
2. The stock would be used for some other sales order.
But here the scenario is, I have sufficient stock in unrestricted use and the sales order stock is shown separately.
Are there any other reasons for non-confirmity of the stock.
Please advice.
Thanks
Sunil

Hi,
Further to your query
1.If the sales order stock is available , you cannot use it for other sales order.
2.Check Credit block and try releasing the order through VKM3
3. Check the Sales order required delivery date is past.
regards
KRSNA

Similar Messages

Reg: confirmed qty in sales order

Hi SD gurus,
I have an issue in confirmed qty. I have created the sales order with the qty 27900 but the system has confirmed 26100, but the delivered qty in schedule lines is 27900 and i am able to deliver 27900 qty. why the system has allowed me to deliver greater than the confirmed qty.
In general system will allowed to deliver less than or equal to the confirmed qty.
Please provide me your valuable inputs on this.
Thanks and regards,
Hari Challa.

Dear Hari
It is really surprising that despite "B" is maintained for item category, you could do PGI in excesss of stock quantity.
Please check in VTFL copy control for the combination of your delivery type and billing type and check for the following:-
At Header Level
Copying requirements::::003
Determ.export data::::::::(Blank)
Assignment Number:::::::E
Reference number::::::::::E
Similarly, select the item category and see what is maintained for the field "Billing quantity". It should have been "B" there. Similarly, below there is one more field "Pos./neg.quantity". It should have been "+" there.
thanks
G. Lakshmipathi

It still shows confirmed quantity at sales order in case of no stock

Hi,
I have the availability check configuration, but my requirement for 0 confirmed quantities at sales order in case of no stock is not working. That is- It still shows confirmed quantity at sales order in case of no stock. Please suggest.
All the setting for availability check is done. I have set the accumulation as 3 in checking group. But still not working.
Thanks
Mauryan

Dear Mauryan,
ATP check will work if you have already turned on ATP check in the following 3 transactions:
OVZ2
OVZG
OVZ8
You need to turn on ATP at your checking group, requirement class, and schedule line category. If one of them is off, then ATP check will not work. See note 547512, Q1.
Claire

Issue related to confirmation of Stock in Sales Order.

Hi Gurus,
I have an issue related to confirmation of Stock in Rescheduling.
I have created a Sales Order for 10 Cases. I am using a Rescheduling Program for the confirmation of Stock
in Sales Order. I have a stock of 100 Cases but still when i am putting that Order in Rescheduling Program for
confirmation it is showing me Deficit of Stock.
Also I have checked the Stock in MMBE it is showing Stock of 100 in Unrestricted Use.
Also I have checked in MMBE the On Order Stock is 150.
Please could you give me relation of On Order Stock in this.
What role it plays in Availability Check.
Is it because of On Order Stock I am not able to confirm the Sales Order Quantity.
Awaiting for the resolution.
Thanks & Regards,
Sam.

Hi Jameer,
Thanks for your reply,
I have replicated the same scenario in Quality it is working fine.
I forget to add up one more thing in my last issue. There is Product Allocation in Material Master.
When I go to Sales Order change screen and go to Schedule Line Level to Product Allocation screen
it is showing the Stock. While same scenario in Production user is not able to confirm the Stock Quantity
in Sales Order. I want to check the Alloted Stock against that Particular Customer in Product Allocation.
I need the table and T Code so that I could do the detail analysis with respect to Product Allocation Stock.
Please if you could help me out.
Thanks & Regards,
Sam Rock.

How to Restrict Confirmed Quantity in Sales Order (Based on Batch Expiry)

Dear SD Experts,
Currently our sales order confirms any amount of quantity if stock is available. And only during delivery it checks for the expiration of the batch and reduces the delivery quantity to batches available in stock within expiry.
But since we are doing a bulk creation of deliveries at the end of the day, the check for expired batches is happening too late and no visibility for the data entry operators of stock that cannot be delivered during creation of the sales orders.
So I am looking for solution to restrict the confirmed quantity in sales order to actually confirm only stock what can be delivered. i.e. based on expiry of the batch.
Thanks!

hi
in Logistic general - batch mangement - batch determination allocation and check activation - maintain allocate SD search Procedure/ activate check
check this for your sales area and sales document type and then in the search procedure maitain the strategy to check the Expiration date.
regards,
Sudhir

Delivery quantity greater than confirmed quantity in sales order

Hi experts,
Quantity in delivery order can be changed to more than the confirmed quantity in sales order when there is sufficient stock. (Setting "Check overdelivery" in 0VLP already maintained "B-Situation rejected with an error message").
Anyway in system to check only "confirmed quantity" can be delivered?.
Regards,
Liang

Thanks Ankur for your reply.
The "Overdeliv. tolerance" in customer master allow customer to deliver more than the quantity in sales order.
But my situation here is to control the deliver quantity base on confirmed quantity in sales order.
For example, i have quantity 10 for an item in sales order, and i only confirm 5 to deliver. Let's say my stock has more than 15 quantity, during DO creation, system will proposed 5 but i can manually change quantity to 10.
I would like to control only confirmed sales order can be delivered. Is this only can control using user exits?
Best Regards,
Liang

Customer Reserved stock on sales order creation

Hello experts
We have a business requirement to be able to reserve an agreed quantity of a material in stock for a nominated customer, such that when that customer places an order for the material it will always be available. The material is also purchased by other customers on an as and when basis. The reserved element of stock is not available to other customers.
When the customer for whom it is reserved places an order the stock should be automatically confirmed for that sales order.
This will not be consignment stock.
Is there a way of doing this process in SAP without consignment processing?
In some systems this is called Hard Allocation. Allocation of the available stock to a entered sales order thus making this stock unavailable.
Any help would be greatly appreciated.
Cheers
Nick Griffiths
SAP Analyst / Data Migration Team Leader

Hi George Chen
with sales order stock .. is ther a way of allocating the stock from unrestricted stock .. i understand that you have to have the stock in a "special" area to move it to the sales order?
excuse my ignorance but what is IS-AD solution?
thanks
Nick

Userexit to prevent negative stock in Sales order

Hi
Is there any userexit avilable to prevent negative stock in sales order.
When i an creating a sales order, the schedule lines are getting confirmed without posting any stock. In availablity check when click on ATP quantity it shows negative stock.
Despite having negative stock it is alllowing me to create sales order and create delivery but no PGI. It gets block at PGI. Now i want to know is there any Userexit through which i can prevent negative stock in sales order. Thats ig stock in negative , it should not allow to save the sales order.
Any help will be really useful.
Regards
Jalaj Nakra

Exit MV45AFZZ will be useful.

Reg : Availability Check in Sales Order

Hi Greetings!!!
I have a requirement, in Sales order line item I am having 100 Qty, Stock is available 75 that has confirmed for this sales order line item, remaining quantity 25 system should automatic generate PR not for seperate line item. For this requirement what configuration i need to do.
Please do need full.
Thanks Regards.
Prasad.

Dear Mr.Prasad
Pls take the help of an MM Consultant & do the necessary settings in MRP Settings.
Is it a MTO or MTS material?
By doing that, planned order will trigger PR.
Rgds
Sumanth.Gururaj
Consultant/Systems Analyst- SAP SD/MM

No Confirmed Quantity at Sales Order

Hi,
I have requirement where i dont want the system to confirm the quantities at sales order level though the quantities are available at stock.
Please be informed i have tried deactivate the Availablilty Check at Schedule Line Category and also tried NO CHECK option at the Checking Group.(KP)
If I have assigned KP Availabilty Check in the material master, system doesnot check the availability but the quantities got confirmed in the sales order schedule lines. As per my requirement, system should not give the confirmed quantites and schedule line date even though the quantities are available at stock.
Can anyone help me to fix this?
Regards,
SS

Hi,
Thanks for your reply.
Reply to Lakshmipathi, My client doesn't want the system to confirm the quantities until the management takes the decision. On the same time, the sales order needs to be recorded and they want to perform the manual availability check whenever they decide to confirm the quantities.
I tried assigning the delivery block in sales order and also I tried with null value in requirement type. Both ways did not solve my purpose. Still the system confirms the quantities.
Is there any other way to meet this requirement?
Thanks again for your efforts.
Regards,
SS

Check Credit and Stock on Sale Order

Hi All
Could you please tell me how to check Credit and Stock on Sale Order.
Thank and Best Regard
Thang

How To Do Configuration For Credit Management
Credit and risk management takes place in the credit control area. According to your corporate requirements, you can implement credit management that is centralized, decentralized, or somewhere in between.
An organizational unit that represents the area where customer credit is awarded and monitored.   This organizational unit can either be a single or several company codes, if credit control is performed across several company codes. One credit control area contains credit control information for each customer.
For example, if your credit management is centralized, you can define one credit control area for all of your company codes.
If, on the other hand, your credit policy requires decentralized credit management, you can define credit control areas for each company code or each group of company codes.
Credit limits and credit exposure are managed at both credit control area and customer level. You set up credit control areas and other data related to credit management in Customizing for Financial Accounting. The implementation guide is under Enterprise Structure -> Definition or Assignment -> Financial Accounting and then Maintain credit control area. You assign customers to specific credit control areas and specify the appropriate credit limits in the customer master record.
Settings for determining the credit control area of a document. The settings of items 1 - 4 are taken into account according to their priority. The credit control area found is stored in field VBAK-KKBER.
1. Transaction OB38
   Check which credit control area is assigned to the company code.
   Company code:
   Credit control area:
2. Transaction OVFL
   Check which credit control area is assigned to the sales area.
   Sales area:
   Credit control area:
3. Transaction XD02 or VD02
   Check which credit control area is assigned to the payer.
   Payer:
   Credit control area:
4. Transaction SE37
   Is user exit EXIT_SAPV45K_001 being used?
5. Transaction OBZK
   For the settings under items 2 - 4, field "All company codes" must be marked in Transaction
   OB45, or the credit control area must be entered under the relevant company code in table
   T001CM of the credit control areas allowed.
   Company code:
   Credit control areas allowed:
6. Settings for the credit checks
7. Transaction OVAK
   Which settings do exist for the sales document type used?
   Sales document:
   Check credit:
   Credit group:
8. Transaction OVAD
   Which settings do exist for the delivery type used?
   Delivery type:
   Credit group for delivery:
   Credit group for goods issue:
9. Transaction OB01
   Credit management/Change risk category
   Definition of the risk category for each credit control area. This risk category can be
   assigned to a credit account by using Transaction FD32.
10. Transaction OVA8
    Here, the individual credit checks for key fields
    o credit control area
    o risk category
    o credit group are set. Take these key fields from the above settings and go to the detail
      screen. In particular, check whether fields "Reaction" and "Status/block" are set
      correctly. To carry out follow-up actions in case of a credit block, the credit check
      status must be set (field "Status/block").
11. Transaction FD32
    Credit master data for the payer of the relevant document.
    Credit account:
    Credit limit:
    Risk category:
    Currency:
12. Settings for updating the credit values Update of the credit values is required for the limit
    check (static or dynamic credit limit check).
13. Transaction OVA7
    Update of the credit value is active for the corresponding item type if the check box is marked. This field corresponds to
    field "Active receivable" in Transaction VOV7.
    Item type:
    Active receivable:
14. Transaction V/08, Pricing
    In the pricing procedure used for pricing, subtotal "A" must be entered in a line for
    determining the credit value (mark the pricing procedure and doubleclick on "Control").
    Usually, the net value plus taxes is used. This way the system is determined to use this
    subtotal for credit pricing. The credit price is stored in field VBAP-CMPRE and used for
    update and credit check.
    You can find the used pricing procedure of the order under "Item -> Condition -> Analysis".
    Pricing procedure:
    Line with subtotal = 'A':
15. Transaction OB45
    Which update group (field "Update") do you use in the relevant credit control area? The
    default setting is "12". If you use another update group, check whether this is fine with
    you. If you open an OSS message, please tell us the alternative update group.
    Credit control area:
    Update:
16. Transaction OMO1
    Which kind of update did you choose for structure S066?
     In any case, "Synchronous update (1)" has to be chosen as the kind of update.
     All other settings will lead to errors
Regards
Raja
Edited by: ramanathan raja on Jul 25, 2008 4:37 PM

How to transfer the stock form Project stock to Sale order stock

Hi
How to transfer the stock form Project stock to Sale order stock
I tried to do this with movement type 413Q
System is giving me error
Valuated project stock not allowed with customer stock.
Message no. KI346
How to do this
Thanks
NK

You can use Mov Type 412-Q
412 Q Transfer posting project to own - reversal
Thanks
Rajesh

Stock ans sale order stock

Dear All,
What is difference b/w stock and sale order stock.and what is its impact if i use strategy 40.and what is the movement type to transfer stock to sale order stock

What is B/W stock?
Strategy 40: Planning with Final assembly.
When you plan the sales order, MRP create receipts and when you do the GR, the stock will posted to to Unrestricted stock. PGI for the Sales order deliveruy is done from the Unrestricted stock. which can be used by any sales order.
The Movement type to transfer the Stock from Unrestricted to sales order stock is 411E.
if you use 20 or 50 startegy depedning on your requirement, the stock directly is posted to the Sales order stock, which cannot be consumed by any other sales order.
Regards
Ratan

How to control not to confirm quantity in sales order schedule line

Hi,
We have a problem with confirmed quantity in sales order schedule line.
When I reject a position in a sales order, confirmed quantity still remains with quantity ( diferent to 0).
I need in some cases that system not to confirm quantity in schedule line at item level.
I've tried to do this with a new routine in OVB8 transaction, but it didn't work.
Could you help me? How can I avoid the system to confirm quantity in a sales order item?
Thanks in advance....

Hi Lakshmipathi,
I'm sorry. The rejection was a bad example.
I need, in some cases, that the system doesn't confirm quantity in sales orden item. We have a custom field in sales order item and we need to confirm with 0 quantity , when that field has a specific value.
Due to that field is a custom field, I need an exit, or rutine, or .. i don't know...to inform a standard field too ( delivery block, rejection...) something to get confirmed quantity to 0.
I've tried with rutine in OVB8. But It didn`t work
I've tried with delivery block, but with this all items in sales order, confirms with 0. I need at item level.
Thanks

Confirmed quantity in sales order and credit check

Due to the fact that we are using automatic credit check , for the sales orders that are not blocked due to credit control the confirmed quantity is made to 0 until some person responsible unblocks the sales order.
My issue is how to prevent the confirmed quantity from becaming 0 even if credit block exists

Dear Friend
If the automatic credit management is active the confirmed quantities of sales order becomes 0 because in t code OVB8 the requirement no used will be 101 and system routine will be 1 that is system reservation
Here you need to change the 101 to something else or you have to write a new routine thro ABAPer so that even if the document goes for credit block the confirmed quantities doesnot change or become 0
I dont have the practical experience of changing this to something else and having worked on that
But you may try that
The area to explore or get your requirement is this only
Regards
Raja

Reg confirming stock in sales orders

Similar Messages

Maybe you are looking for