Reg: Continuous Printing issue in EPSON LQ-300+II

Dear All,
I'm facing a continuous cheque printing issue with EPSON printer (LQ-300+II).
We've created a new page format for state bank of Mysore cheque (Dimension 231mm width X 92.5mm Height) and assigned that in our sapscript for printing. The cheque is printed using transactoin F-58.
In windows server properties (print setting), our system admin has created a form with above dimension.
My problem, first & second cheques are printed correctly & identically, but from third cheque the amount is printed slowly starting to print up by 0.5mm. After few cheques it is completing coming out of the box and printing few cms up.
We've tried implementing every possible solutions given in the forum and ended in vain.
1) inserted coding in printer initialization.
2) tried to create similiar page format in windows.
Please sugget a way to get out of this continuous printing issue.
Thanks,
Rajan U

The stated length of the form / paper is in error... that's why the output is "moving" up the page... sound like it should have been 93.0 mm height. I would guess that if you carefully measured the placement on check 1 and 2, you would see precisely how much too short the height is....

Similar Messages

Printing Problem with EPSON LX 300+

Dear all,
I have met a problem with Epson LX 300+. After I set up printing on PLD, the result printing is bad. Font and setting are not the same as preview in SBO. How to solve this matter..? I used SBO 2005A PL 43.
Thanks for your help....
Regards,
agung
Edited by: Agung Adrianto on Aug 28, 2008 8:17 AM

Hi Agung,
Here is a way out for the issue you have submitted. I can't guarantee that this wayout work perfectly:
Question:
As we know that the dos matrix printer supports dos prompt and thus printing speed and
life of the printing head is comparatively more than what we print the same in graphical format.
So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
Any clarifications on this regard would prove very helpful to me.
Regards,
xxxxx
Consultant Business solutions.
Solution:
Do you use one of this printer types:
Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline, Epson FX880, Epson FX890 ?
Here the stepwise I have tried :
In order to print using Dot Matrix printers, follow the below
instructions:
1. Run SAP Business One.
2. Click the upper menu 'File' and select 'Page Setup'.
3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
4. Click OK to confirm your selection.
5. On your desktop, click Start => Settings => Printers.
6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
9. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
Note that in case the value '120X144' is not available you should select a similar value from the list.
I did not test it yet and I am not so sure about the result but you could test it.
Rgds,

Printing Cheque using EPSON LX-300

Hi Everyone,
Could you please help me with this issue?!
I had implemented the Cheque process but when I am using EPSON LX-300 printer an error occurs. Some numbers and letters are showing up on the begining of the line. I think that this is because of printer configuration.
On the Spool transaction the cheque is nice.
Do you know how I can solve that?
Thanks
Daniel Dorta

hi
set the margin either in the Print out or in the printer configuration.

Printing Problem with Epson LX-300+ii and LX-310 in Windows Server 2012 R2 64-bit

I recently installed Windows Server 2012 R2 64-Bit.
We have Printer Epson LX-300+ii and LX-310 (dot-matrix) that we share among users. Each user access the Server using Remote Desktop. From previous experience with Windows Server 2008, I knew that these printers will be problematic, especially regarding
the Easy Print driver.
And I was right, using the Easy Print driver, I got the following result:
And so, I did manual mapping & disable the "Use Remote Desktop Easy Print printer driver first". Haha, what a surprise, I got the following result:
And so I uninstalled the printer driver, and install it again, thinking that I might chose a wrong driver, but.... same result. I know for sure that I chose the correct driver.
Next, I tried connecting the printer DIRECTLY to the server. Log-in to the Server directly,
not using Remote Desktop. And tried printing again, haha... really... what a surprise... I got the same problem here !!!
So now I know the problem is not the Easy Print driver, not mapping or registry problem either. It's the print driver. This is SUPER FRUSTRATING, I tried the same driver from the same CD in Windows 8.1 64-Bit with no problem. I tried it too in Windows 7
32-Bit with no-problem either. But somehow, this driver is problematic in Windows Server 2012 R2.
Any help? Anybody else bump into this same problem ? I'm close to giving up, been spending too much time figuring out this damn thing.
Andy

Hi Bulent Sahin,
Thank you for your reply, I tried IBM Graphics driver, but the result is equally as bad. But your answer inspire me to try different drivers. And so, the closest & best driver that I could use now is EPSON ESC/P 9pin V4 Class Driver
It's not as good as I would expect, but at least now, it's acceptable & readable. I can't believe that I'm the only one who have this problem
Thank you Mr. Sahin

CS5 printer issues with Epson R2400

Upgraded (????) to CS5
Win7-64, Photoshop CS5 - 64 & 32, Epson R2400 (Epson Easy Photo Print v1.51 Drivers)
CS5 will not print multiple copies. Can change it in printer settings, makes no difference.
CS5 will not allow me to change orientation to landscape. Have to go to printer settings. Will not stick. have to change it everytime I want to print the same file.
CS5 will lose the printer. Have to change the printer then change it back. "because the printer does not exist" is the error message. (Not even a complete sentence!)
Printer profile will not stick.
These issues did not occur with CS4.

You need the 6.5dAs drivers from http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=54861&infoType=Downloads
The copies issue is a known problem. Sorry about that. But the other problems are not things we saw when testing with those drivers.

Borderless Printing issue on Epson R1900

I'm using the latest Snow Leopard, Aperture and Epson drivers.
This one is driving me nuts. I have some 5x7 paper. The paper size choices include a "5x7 in" option and a "5x7 in (Sheet Feeder - Borderless)" option. In Photoshop, these work as expected - 5x7 has border, 5x7 borderless does not. In Aperture, 5x7 works but Borderless (and, as it appears, and paper with all borders defined as 0) is interpreted by the driver as roll paper and I get an error when printing:
"The Source selected in the printer driver is not appropriate for the paper that is loaded in the printer. To print on a CD/DVD, first remove the paper and then open the front tray. Load the CD/DVD tray into the front tray, then resume printing."
Any advice?

I've actually had this issue on my R1900 way back into 10.5.8 so it's not caused by Snow Leopard (or fixed for that matter). I have been able to get around it but by doing things like opening the ink compartment and resetting ink that I had just inserted or by changing the paper. All kind of random and I haven't found any one thing that avoids the error but it will print. Eventually. Sometimes. I really wish someone would figure out why it is doing this, it has actually been an issue for me since I first got the R1900...

Printer issue with epson WF 2540

All of a sudden, I'm unable to see print when printing an Adobe PDF or a TextEdit file. I AM able to print from a screen grab.
Yosemite 10.10.3
Apple says it's because Epson has not upgraded a driver for Yosemite. Epson says it's Apple's fault. Or mine since the screen grab software does print. One PDF just printed lines and volumes, no data.
Thanks

Having the same problem with my Epson WF2540. I reset the printer and now it is unable to find it. Says device is not connected. The wifi is working on it but for some reason it can not seem to add the printer.
Really hoping there is a fix for this soon!

Need help with Photoshop CS5.5 Printing issues with Epson R2880

Hi,
I'm experiencing problems printing on photoshop, I already selected center image but the epson printer always print to the upper left hand corner of
the page. And the image is always cropped in a weird way, so eveytime I print the image is not a whole. I made sure I selected the right paper size too.
It used to print okay, this happened a while ago but I don't know how it got fixed evetually, I think was after a complete restore of my OS.
I am sure its nothing to do with the Epson driver, becuas after I export the file from photoshop to PDF it prints fine with either preview or adove acrobat.
Has anyone else experienced such problem?
Thank you!
Shao

Nope, not using the presets, i still cant figure out why it suddenly cant print right!
btw, thnks for the link, its very useful!!

Problem with character mode printing on epson lx-300

Greetings
I developed a character mode report and is printing fine on the printer lx-300 when I use Reports 6i (Client/Server)
We migrated all the platform to OAS 10G Release2 bu the same report has the following behaviour:
1. The left margin is shift to lthe right about 2 inches.
2. Is printing shrinked and the characters doesn't see well.
The report is a character mode report of (132 columns, 66 lines).
I set the default prt to:
printer "dflt"
height 66
width 132
after page control(L)
return ""
linefeed control(J)
The run parameters are mode=character and desformat=dlft.prt
Anybody has experience using character mode reports on 10g on matrix printers like epson lx-300?
Thanks!

Hi Agung,
Here is a way out for the issue you have submitted. I can't guarantee that this wayout work perfectly:
Question:
As we know that the dos matrix printer supports dos prompt and thus printing speed and
life of the printing head is comparatively more than what we print the same in graphical format.
So when I tried to print from SAP Bone in dot matrix printer, the printing speed is very slow and quality of printout is not good enough.
Any clarifications on this regard would prove very helpful to me.
Regards,
xxxxx
Consultant Business solutions.
Solution:
Do you use one of this printer types:
Dot Matrix, Printer, Needle Printer, Citizen ProDot 300 , Oki Microline, Epson FX880, Epson FX890 ?
Here the stepwise I have tried :
In order to print using Dot Matrix printers, follow the below
instructions:
1. Run SAP Business One.
2. Click the upper menu 'File' and select 'Page Setup'.
3. The Print Setup window opens. Under 'Paper', in the field 'Size', select 'Letter' from the drop down menu.
4. Click OK to confirm your selection.
5. On your desktop, click Start => Settings => Printers.
6. Right click on the required Dot Matrix printer and select 'Printing Preferences...'.
7. Click the 'Paper/Quality' tab page and click the 'Advanced' pushbutton.
8. Under'Paper/Output'=> 'Paper Size', click on the underlined paper size(e.g. A4) and select 'Letter' from the drop down menu.
Note that if you leave the value 'A4', each page will be spreaded over 2 pages when printing using Dot Matrix printers.
9. Under 'Graphic'=> 'Print Quality', click on the underlined value (e.g. 230X250 dots per inch) and select '120X144 dots per inch' from thedrop down menu.
Note that in case the value '120X144' is not available you should select a similar value from the list.
I did not test it yet and I am not so sure about the result but you could test it.
Rgds,

Distorted printing to dot matrix epson LX-300 printer

the problem im having is the same as the one mentioned here:
http://social.technet.microsoft.com/Forums/windows/en-US/ab12901e-4b1e-4a25-bdb6-25c2c4f576e8/ie8-dot-matrix-printing-issues?forum=itproxpsp
the basic problem is that when i print from a computer to an epson LX300 printer using firefox the spacing between letters seems distorted. you can find the image of the problem on the link above.
the only difference is that they are talking about using IE 8 while im using firefox 26. the user Joel-MMCC made the best explanation of the problem except that firefox is not running on trident. but it seems to be exhibiting the same problem at random. i have about 10 computers on my network but only 2 are having this problem. and i could not for the life of me figure out why.
when i tried the work around of changing the print resolution from the default 120x72 to 120x144 it seems to fix the problem except that the printout fonts and letters are now too far spaced. and since our webapp is already optimised to print on the 120x72 resolution and because we have fixed continuous forms that we print to, this work around will not work for me.
i tried installing IE9 on the troubled computer and it seems to work. the only problem is our webapp is optimised for firefox. certain javascripts dont work on IE.
im really at the end of my wits here. any ideas?

well, i have this same problem too. my only solution is to not install most driver.
@akinga: i agree, i thing it's somehow related to vga driver, and it seems only affect the new intel's. the old ones work just fine with all driver installed.

EPSON LX-300+II printer

Hi,
We are implementing ECC6.0 and now we are doing printer configuration. We have EPSON LX-300+II dot matrix printer. And we have created a output device ZLP01 but we haven't found this printer in the device type list. So we have choosen nearest printer KPKS: EPSON Dot-Matrix KS, device class standard printer, Host spool access Method G:Front End Printing with Control Tech., Host Printer _DEFAULT.
But it is printing some junk numbers like f460y2X0y2X0y2X0y2X0y2X0y
So, please help me to configure my printer.
Regards,
Nilesh

Hi Nilesh,
This is SAP Business One forum.
Close this thread and re-post your question to a correct forum
Regards,
Bala

Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?

Seeking help with PS Elements 11 which does not work with Epson r2000 printer. Epson tech support could not fix, said it is PS e11 problem. Receive prompt on PS e11 screen when I try to print stating "not compatible or settings are not correct. Have set PS to manage color and printer manages color to off. Would appreciate any suggestions. Thank you.

Hi,
Sincerely appreciate your help. Running Windows 7 on a Dell XPS420. System has been very stable for years. Before purchasing the Epson r2000, I owned an r1800 which was an excellent printer but after seven years started to exhibit paper feed problems. The r1800 worked with all applications and I was well satisfied with the saturation, contrast, etc. printing mostly 8x10 and 11x17 prints.
Thank you for the information about the # of installs for PS E11, will try uninstall/reinstall this morning.
Will let you know how things go.
Richard
Date: Thu, 12 Sep 2013 19:47:38 -0700
From: [email protected]
To: [email protected]
Subject: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
    Re: Barbara Brundage, can you help with PS Elements 11 and Epson R2000 printer issue?
    created by Barbara B. in Photoshop Elements - View the full discussion
What operating system are you using?
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5678022#5678022
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5678022#5678022
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5678022#5678022. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Epson R2400: Printing Issue: Dark printing after 10.7?

This question goes out to all of the Epson R2400 printer owners whom, if you're like me and have had one for a while, seem to have printing issues after every little change in the OS:
In Brief: Printing to the Epson R2400 via USB direct from iMac was printing well; outputing from InDesign, PhotoShop, and Acrobat Pro (all are CS5). I am not 100% sure because this is not a printer that I use daily, but I believe that I am having these printing issues after upgrading to 10.7.2 from 10.7.1.
The issue is that an output is very dark overall, or (after tweaking settings) will have a dramatic color shift to heavy magenta/black. In general, my traditional printer settings no longer produce correct outputs.
Anyone that has any suggestions or similar issues, I would like to hear about it.
Notes:
1. Yes, I completed all of the tradional voodoo magic: I cleared the printer caches, removed the printer, setup a new printer, updated the drivers via Apple software update, then once that didn't work, updated the drivers from Epson - even reverting to the older v6.5 drivers. I'm now back to the v8 drivers from the Apple software update.
2. My printing tests are being conducted using a standard color test file that I've used to calibrate color on this Epson R2400 for years. I generally know that when this file doesn't print correctly something is afoot.
3. My first attempt at correction was simply checking head alignment and completing a general cleaning of the heads. Didn't help.
4. General question: Does anyone know of a compatible printer manufacturer of similar quality of output that actually cares about Mac users? Epson just never seems to really care about keeping their Apple drivers up to date or making sure that they work properly. Humble opinion.

Ok. I believe that it all comes down to the use of a third-party ink.
I didn't realize that there was a switch to a "refill" ink (to save money it appears) on the light-light-black and magenta. Switching back to Epson ink cleared the matter up.
I guess sometimes it's the simple things that elude us...

Rastertoescpll error issue when trying to print to my Epson Artisan 835. Does anyone know what I need to do to correct?

I am getting a rastertoescpll error when attempting to print to my Epson Artisan 835 printer. I have checked the printer and it doesn't seem to be the issue. Does anyone have suggestions as to how to remedy?

Click here >>
http://er.epson.com:8001/start?TM=false&CMD=iSearch&CB=1886098778&LG=1&TP=Novice Case&Q1-1-1886433252=1886433723&FI=1&firstQuestionID=Q1-1-1886433252&firstAnswer ID=1886433723&category=allinone&model=art835&displaymodel=Epson+Artisan+835&refe rralmodel=Epson-Artisan-835&pid=C11CA73201

Epson 700 printer Issue

After updating to Yosemite, I could no longer print and received communication errors from my Epson Artisan 700.
I deleted the printer and re-added via Bonjour. It still did not work and no longer showed a scan option!
I was able to get the printer to work but adding via IP address, but I still cannot scan from my computer!! It's like the updated driver isn't working. I loved this printer because I never had issues. Any suggestions? I use the scan functionality frequently. Thanks.

With Yosemite, you have to try any USB port, and you will see that some does not work, some does...
Repair permissions and restart
cancel install printers
Re install printer driver from EPSON website, using the video reported here

Reg: Continuous Printing issue in EPSON LQ-300+II

Similar Messages

Maybe you are looking for