Reg. Country code creation

Dear All
If I create country code Inida (IN) in OX10 the following error occured
"Entry IN does not exist in T005E - check your entry"
Please help me.
Rajj

Hi
This may happen because IN is not activated or maintained in configuration
First check
SPRO>SAP NetWeaver>General Settings>Set Countries>Define Country Codes
here check whether entry IN available or nor if not then create new entry for IN
Then check OX10
Vishal...

Similar Messages

Creation of new country codes - Serbia.

The business user is not able to find country code for Serbia in production system.
We are currently using SAP ECC 6.0.
I have refered the SAP note no 603152 for creating country code .
Their are two alternatives available to fix it:
1. Manual creation of country code in the system. We need to maintain additionally the currency also in the system. Note: I do not know the implication of manual creation of country code in SAP sytem. As Country codes are used by many tables.
2. If we need new country codes for country settings of Serbia.
Then it can be done by using new SAP Basis (Netweaver) releases from release SAP_BASIS 710 or appropriate support pack. Then country precustomised setting of serbia can be done by upgrading support pack of basis.
The above alternatives are available. As country code is an important aspect & maintained at client level.
Please let us know which alternative would be suitable, Why.

I would recommend the basis way.
If you go the manual way - Go to T Code OY01.
Thanks,
Nandita

AT THE TIME OF CRETION OF BP IN CRM HOW GET COUNTRY CODE ATUMATICALY DISPL

hello friend my requirement is at the time creation of bp in crm with instead of manually selection in country code system want pick automatically and display as a display field (not editable to change)
HOW IT IS POSSIBLE and what are things need to do this.
if any one knows please reply
bindhu

Hi Bindhu,
1. You are able to see country field populated by default since for your user the parameter LND has been set to a default value.
To check the same go to transaction SU01, put your username and enter. Select tab Parameters, in column Parameter Id there must be an entry for LND and default value must be assigned to it.
You can also see the same in System-> User Profile --> Own data.
2. The field is in display mode because of field groupings.
In transaction SPRO
SAP Implementation Guide -> Cross-Application Components -> SAP Business Partner -> Business Partner -> Basic Settings -> Field Groupings
For one of the option here Address: Country must be set to display. e.g Configure Field Attributes per Activity
Here choose Create, for dataset Addresses, field group Address: Country must be set to display. If not check in others.
If the above 2 are not found, even Badis can be responsible for the same.
Wish this helps.
Regards,
Shalini Chauhan

Company code creation issue

Hi All,
When I am creating company code I am getting an error as below.
"you may not change the currency since documents exist with this currency"
Above issue is coming while new co code creation or copying of existing co code also.
Please advice on the above issue.
Regards,
Riyaz

Hi,
I hope you are creating new company code by copying from the exiting company code. If you copy one company code to another company code then you will get few pop- up message like do you want to use same chart of account or do you want to use same currecny like that. So may be you have selected different currecny. Sap has come up with country template for each country. So you can use country template to create the new company code.
Thanks & Regards
R.K

Error in Process code creation

Hi All,
I need to create a process code and i need to attach a custom function module for that process code.
So i have created custom FM.
afterward in WE42 ,
I gave custom process code name ,description and FM .
when i tried to save the same its giving following message.
For entry, access 'Function module for ALE-EDI inbound processing'
when i tried to give some entries its not accepting...
Please provide me the steps for process code creation.
Reg,
Hem.

hi
good
Definition
Another name for a specific process, for example function module or workflow. IDocs are read or written in this process.
Use
In the partner profiles, the processing is never addressed directly but rather always using a process code. You can therefore replace an old process with a new one for any number of partners by assigning the existing process code to the new process.
Two types of process code are used in conjunction with the partner profiles:
1) Outbound Process Code - if you are using outbound processing under Message Control, the IDoc is generated in the IDoc Interface. The process code names the relevant function module.
2)Inbound Process Code - names the function module or workflow which reads the IDoc data and transfers the data to the application document.
There are process codes for exception handling:
1) System Process Code - names the workflow which is triggered in inbound or outbound processing when an exception occurs.
2) Status Process Code - names the exception workflow which is triggered when an incorrect status is returned by the external system.
These two types are configured centrally and not on a partner-specific basis and therefore do not have to be maintained when a new process is defined. They were introduced for the sake of completeness, so that each process in the IDoc Interface is addressed using a process code.
reward point if helpful.
thanks
mrutyun^

Default Country Code in Address Infotype

Hi Gurus!
I need to set a default country code in the address infotype 0006, during creation.
How do I set the default country? Is there any feature linked to infotype 0006?
Best Regards
LA

No need say sorry my dear friend
This screen programing actually this will be done by ABAP er
Tcoe se71
give Module Pool MP000600
SCREEN NUM 2000
Click on change
Here you will find PBO PAI
Best Regards

New tax code creation and pricing procedure for Sri Lanka

Hi,
I have one company code in India..Now I have requirement to create new plant under different company code in Sri Lanka.
Can anybody tell which tax pricing procedure is to be defined for Sri Lanka and what are different steps involved in the creation of new tax code for Sri Lanka.
Thanks & Regards
Sunil Singh

Hi Mr. Biju,
Thanks for reply...
Enterprise structure has already been decided. Everything we have copied from India for Sri Lanka and working fine except below error.
As I have already mentioned that I have copied tax pricing procedure for Sri Lanka from Taxinn then assigned to country code LK (Sri Lanka). I have created new tax code for LK (Sri Lanka) in FTXP then I have assigned the tax code with company code in SPRO Logestic General--- Basic settings.
After completeing this config, system is showing error" tax code is not defined to company code" in MIRO.
Please suggest...
Thanks & Regards
Sunil Singh

Obsolete Country Codes - Transaction OY07 _ Delete/Block old country code?

Hallo All,
we have been asked to apply SAP Note 603152 which refers to the creation of 2 new country codes RS & ME for Serbia and Montenegro respectively.
The note advises that the previous country code of CS for 'Serbia & Montenegro' is now obsolete.
Our question is : Do we need to block or delete the previous code of CS ?
We have no master data using this country code.
Kind Regards
Mike Lyons on behalf of Wolfgang Bessler
BP International Ltd.

HI Suresh,
Create New account key and assign same in TAX PROCEDURE. Assign GL account against Account key irrespective of Tax codes.
Rgds
SumaMani

Wrong country code by default

hallo,
i often visit abroad - last time i was in hungary. have now been back in uk for 6 months and yet if i dont put the country code in when trying to dial a number, it shows up as prefixed with 0036 - the hungarian code. 1--- how do i make the default 0044? 2--- if i input a uk number starting with 0044, does it think i am calling from hungary? - not funny as with the new regs, hungarian vat is 27%.
any thoughts appreciated, cheers, sue

Kabweman418 wrote:
I am in Quito Ecuador and have tried to make local calls using international code but cannot get a connection. I have even changed my home location to Ecuador But still keep getting my h One code getting put in
There could be a couple of issues going on here....
1. What is the number in Quito you are trying to reach? Replace the last 4 digits with XXXX, but list the rest of the number including the area/city code. Numbers in Ecuador should be dialed from Skype using this format: +593 x xxx xxxx (international country code, then the single-digit area code without the leading zero used on the Ecuadorian domestic phone network, then the 7-digit phone number). Even if you are also in Ecuador, calls must be dialed in the international format with Skype.
2. Do you have Skype Credit and/or a subscription covering calls to the type of phone you are trying to reach? Calling telephones from Skype is *not* free. Calls to landline phones in some cities cost more than calls to other cities, and calls to mobile phones cost more than calls to any regular landline phone in that country. Skype has subscriptions for 60 or 120 minutes of calls a month to Ecuador, with subscriptions for just landline phones and both landlines and mobiles (the latter costs more).
Hope that helps!
Patrick
Location/Ubicacion: Arizona USA
Time Zone/Hora Local: UTC/GMT -7
If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
I am not a Skype employee. No soy un empleado de Skype.

How to find out the user Country code in flex

Hi all,
I want to find out the country code, to load dynamic localization swfs.
example : my swf file name
en_US_res.swf
by using capabilities.langueage am getting the local user langueage, am not able to find the locale country code. please help me out
Thanks!!

Hi Jesudasan ,
You can know the user details with version management.Please find the
below procedure to know.
Go to table->Utilities tab->version->Version management->Compare the previous one .
Hope this solves the issue,Let me know if you have any issues.
Thanks,
Rajani

How can I use iCloud-keychain if i can not find my country in the country code list?

How can I use iCloud-keychain if i can not find my country in the country code list?

Welcome to the Apple Community.
If your country code does not appear in the list…
Go to System Preferences > iCloud > Keychain and enter your Apple ID password (Settings > iCloud > Keychain, from a mobile device)
Select the ‘Create Different Code’ option. (Mobile devices only)
Select the advanced option and choose whether to create a random code or no code, selecting the later allows syncing across devices but not with Apple’s servers.

Satellite L750D - Cannot register warranty due to country code

Unsure if this is an appropriate question BUT...
I am trying to register my L750D Notebook for warranty and it will not accept my country code.
I live in Australia so the country code is 61. I live in South Australia - code 8 and my phone number is 83xxxxxx.
So I have tried to put the code in as 61 then 8 then 83xxxxxx but it will not accept it.
Would anyone know what I am doing wrong?
I have also tried about 30 other ways of doing it?
Kind regards
Felicity,

Hi mate
Did you try to register the warranty on the right Toshiba page?
Please check this Toshiba Australia warranty registration webpage:
http://www.mytoshiba.com.au/support/warranty/statements
Please post feedback!

CUCM 8.6.2 Generating CSRs With Incorrect Country Code

Hi folks, I'm running CUCM 8.6.2.25900-8 on a single cluster (1x pub, 4x sub). My CA certs for the tomcat service are due to expire shortly so I've generated CSRs for all the servers and submitted them to our provider. All but one of the requests went through with no issues but one failed because the CSR specified a country code of 'US'. We are in the UK and the four other servers all generated CSRs specifying C=GB.
Examining the current tomcat cert or issuing "show web-security" on the command-line of the server who's CSR failed also show 'C=GB'
Looking at the 'set web-security' command it appears that I cannot change the country code.
Why is the server generating CSRs with 'C=US'?
How do I change this behaviour such that they are generated with 'C=GB' instead?

Surprisingly, it has made it all the way to 10.5(x) with the same info and the same error...
I did found a method to change it via root access, and you might not require root access, but I can't tell for sure as I would need to look at exactly what the contents of the file that TAC changes, but apparently it's just the platformConfig.xml that they need to change and reboot.
If that's the case, using the utils import config using pretty much all the same info, except the country, would end up with the same outcome.
Again, not 100% sure but theory says that should do the trick, you can run that thru TAC if you open the case and see what they think about it.

How can I make local calls without using a country code when it's in my Contacts?

The phone numbers in my Contacts all contain country codes because I do a lot of travelling.
An example of this might be:
+1 (229) 123-4567
+44 (0)12 345 6789
+31 (0)10 2345 6789
I have an unlocked phone so when I travel, I usually pick up a local SIM and use that to make calls.
The problem I have is that when I am abroad and select a phone number from my contact list it doesn' work. For example, if I select a contact with the number:
+31 (0)10 2345 6789
A voice-recording comes on saying that the number I had dialed was incorrect.
But when I dial the number manually:
010 2345 6789
It works.
In the US I do not have this problem because for some reason, the phone knows whether the +1 is needed or not. I'm sure if it uses it at all when you're in the US. When I dial internationally from within the US, the number dialing works fine.
So this problem only occurs when I'm dialing locally in the country I'm in while travelling outside the US.
Anyone have any idea of why this is happening and more importantly, what I need to do to fix this? I would hate to have go and change all my contact numbers and get rid of the country codes. If I ever have to call those numbers internationally, I'll need to manually add the country code back in.
Very annoying!
Advice anyone?

If you include a country number, you have to drop the initial 0 from the area code. eg +31 10 2345 6789 instead of +31 (0)10 2345 6789

How do I add the country code to all contacts when it did not previously appear?

I just moved from the US to the UK and purchased a new iPhone 4S. When my contacts migrated from Outlook to the iPhone they did not include the country code in the US and therefore all contacts numbers are now listed incorrectly. How can I add the country code to hundreds of contacts painlessly?
Thanks in advance.

International Assist is activated. Upon further review this appears to be a case of the original country codes not being added when the contact list was constructed. iOS has not figured this out and thus when changing countries I've been forced to add the country codes to every contact record manually. Disappointing and very labour intensive. If only Apple allowed for a macro that simplified the mass change.

Reg. Country code creation

Similar Messages

Maybe you are looking for