Reg: creation of return deliveries and Post goods recipt..... urgent...

Hi,
I have to create delivery for return sales order and i am not able to find bapi or function module to create return order deliveries. in my case it is serilized materials.
I am trying to create return orders with BAPI_DELIVERYPROCESSING_EXEC...
But i am not able to create.. for return order delivery creation. If this is right bapi can u send me the parameters for this...
Thanks in advance,
praveen

Hi,
Here you can use 653 instead of 651.When you use 653 system will post the stock directly to the unrestricted stock and an accounting document is generated with this movement type.
Regards,
Rambhupal reddy

Similar Messages

  • Goods picking and Post goods issue in VL02N

    Dear All,
    Am hving problem in Picking goods and Post goods issue.
    This is for the Stock Transport Order with Delivery via Shipping
    Supplying plant is 1000(SAP std,sloc 0001) and Receiving plant 1100(sloc 0001).
    Sales org:1000
    Distrbn Chnnl:10
    Division:00
    1.maintained matrial for both the plants.
    2.Creted STO by using DOC type as "UB" and item cat "U".
    3.And getting the Shipping data for the material in the STO.as shipping point is 1000.
    saved the Po.
    4.After that i done the GR w/o PO for the material using Mvt type 501.
    5.Then,VL10B creating Delivery doc.n this is also created.
    6.but when i do the picking and PGI in VL02N there picking field is greyed out bt i have tried to mangae that when i give the picking Qty in the picking qty field system is throwing the following error.
    <b>Item to be picked by WM (picking quantity cannot be entered)
    Message no. VL118
    Diagnosis
    For this item, picking is carried out using warehouse management transfer orders since the material is stored in a warehouse with random storage.
    System Response
    The system does not allow you to enter a picking quantity manually. The picking quantity is copied automatically into the delivery during the creation of the corresponding transfer order.</b>
    is any data missed by me while doing this process?
    pls let me know n help me in this regrds
    Thank you all

    Hi Vijay
    By changing storage location you could do b'coz the new storage location is not maintained with warehouse, hence no need to perform warehouse transactions (TO creation and confirmation) before inventory mgmt transactions (PGI).
    For trying pick up with WH, first u should have enough stocks in approppriate storage bins and u should perform pick up by creation of TO and confirmation.
    warm regards
    sairam akundi

  • Running VL06IF in Background and Posting Goods Receipts

    Hi All,
    We need to be able to run VL06IF (WS_MONITOR_INB_DEL_FREE) in background mode and post goods receipts for the Inbound Deliveries selected based on our variant selection criteria.
    Wondering if anyone is aware of a program that can select the inbound deliveries and post the goods receipts as part of the one process - which can be run in background mode, with the ability to accept a variant.
    We are on: R/3 4.6C
    All help greatly appreciated.
    Thanks,
    Ravelle
    Message was edited by: Ravelle Wickham

    VL06IF is list of Inbound deliveries.
    To achieve what you want you should go to VL06I and select Goods Receipt.
    Once you are there, you will see you are running program WS_MONITOR_INB_DEL_GDRC. There you can select a variant and run in Background.
    Once the job is scheduled, the program WS_MONITOR_INB_DEL_GDRC is executed.
    It should do it.
    Leonardo De Araujo

  • Return Item and Free goods check box in purchase order

    Hi Guru:
    I just got the question regarding the return item and free goods check box,my question is that if I check the free good check box,then the price of the matieral will be charged to zero,however,if I want to issue the return purchase order to the vendor,does I need to check the return box first and then issue the return order to the vendor? Then go to MIGO transaction to select the movement type 122 to return the goods,what's the whole precedure for returning the goods to the vendor,can anybody tell me,very appriated!

    Hi,
    Retun to vendor through have two types....
    One is you have Po created, vendor send the item in that few items have rejected so you need to return the item to vendor......
    here in MIGo chose returrn to vendor selce the PO numbere.... system automaticaly take the movent type 122....
    sencond type is Retun PO..... In Po while creting the PO tick the return indication..
    If you do the GR system will pick 161mopvent type.. ( GR returns)...
    REgards
    anand

  • Goods receipt and post goods issue are not updated back from EWM to ECC

    Hi Experts,
    Would anybody able to tell me the setting to be modified / defined to backward flow of information from EWM to ERP i.e. the goods receipt, goods issue are not being updated back in ECC once the goods receipt and  post goods issue are posted in EWM?
    It would be great help if i get the response as early as possible.
    Chakrapani Das

    Hi Chakrapani,
    You might want to try checking the customization on the SCM part following this path:
    SPRO - Extended Warehouse Management - Interfaces - ERP Integration - General Settings
    Pay special attention on the Check of ERP-EWM Configuration transaction.
    After you have checked these you should probably check the outbound queue monitor (tx SMQ1) from EWM to ERP. You can use the SMQ1 - Outbound queue and SMQ2 - Inbound Queue both in ERP and SCM to check the communication betweene these two systems.
    Also you may want to checkt the SLG1 - Analyse application Log in SCM in order to see if any internal bugs exist.
    All the best,
    Claudiu Maxim

  • BAPI for Picking and Post Goods Issue ?

    Hi All,
    Is there any BAPI for doing Picking and Post Goods Issue in VL02N ? I don't think we can use BAPI_OUTB_DELIVERY_CHANGE.
    Is it advisable to use BAPI or BDC ( if no BAPI exist ).  Thanks in Advance.

    BAPI for picking in VL02N
    BAPI_OUTB_DELIVERY_SAVEREPLICA
    BAPI for posting Goods Issue
    BAPI_OUTB_DELIVERY_CONFIRM_DEC
    For reference: http://help.sap.com/printdocu/core/Print46c/EN/data/pdf/LEIDW/LEIDW.pdf

  • Fieldes planned delivery date and actual good recipt date for SAP QUERY

    Hi Gurus
    I am changing sap query. I need to find two fieldes  : planned delivery date and actual goods recipt date
    I dont know MM tables, do you know wrhere are?
    in table EKPO i don't find the fieldes.
    Thanks in advance

    Thank a lot!
    Regards

  • Inboud delivery creation and post goods receipt via idoc at same time

    Hi
    Does anybody knows if there is in idoc message/basic type that can create in one single step the inbound delivery for a purchase order and do the post goods receipt (on the inbound delivery)? Warehouse is not setup.
    KR
    Jimmy

    Hi All,
    Solved by myself.
    As expected , same code has been called for ob delivery and Ib delivery .
    Solution : Have called fm in background task .
    Thanks & Regards,
    Vinod.
    Knowledge has to be shared nt 2  accumulate .

  • Need Bapi Names for Post Goods Reciept and Post Goods issue to STO in MIGO

    Hi All..
    I need to post goods receipt using input data in MIGO. Is there any BAPI that i can use.
    Also once STO (Stock Transport order) is created, i also need to Post goods issue to STO in MIGO transaction. I do need a bapi for this too...
    Appreciate your help and will reward any helpful answers.
    Thanks..

    Hi,
    ata  : gm_header  type bapi2017_gm_head_01.
    data  : gm_code    type bapi2017_gm_code.
    data  : gm_headret type bapi2017_gm_head_ret.
    data  : gm_item    type table of
            bapi2017_gm_item_create with header line.
    data  : gm_return  type bapiret2 occurs 0 with header line.
    data  : gm_retmtd  type bapi2017_gm_head_ret-mat_doc.
    clear : gm_return, gm_retmtd. refresh gm_return.
    gm_code-gm_code      = '03'.
    gm_header-header_txt = firstscreen-bktxt.
        gm_header-pstng_date = sy-datum.
        gm_header-doc_date   = sy-datum.
        gm_header-ver_gr_gi_slip = ' '.  "print
        gm_code-gm_code      = '03'.
      move lineitem1-bwartwa  to gm_item-move_type     .
          move lineitem1-matnr  to gm_item-material.
          move lineitem1-erfmg     to gm_item-entry_qnt.
          move 'EA'    to gm_item-entry_uom.
          move lineitem1-werks  to gm_item-plant.
          move lineitem1-lgort  to gm_item-stge_loc.
          move lineitem1-kostl to gm_item-costcenter.
          while gm_item-costcenter+9(1) = ' '.
            shift gm_item-costcenter right.
          endwhile.
          overlay gm_item-costcenter with '0000000000'.
          append gm_item.
    call function 'BAPI_GOODSMVT_CREATE'
           exporting
                goodsmvt_header  = gm_header
                goodsmvt_code    = gm_code
           importing
                goodsmvt_headret = gm_headret
                materialdocument = gm_retmtd
           tables
                goodsmvt_item    = gm_item
                return           = gm_return.
    Thanks
    venki

  • FM/BAPI for Post Goods Recipt and Reservations

    Hi All,
    Is there any BAPI/FM for posting Goods receipt and Reservations . Please send some sample example to post goods receipt using Inbound Delivery & Reservations
    Thanks
    Bobby

    Bobby,
          I think you can use the FM  BAPI_ACC_GOODS_MOVEMENT_POST for this purpose. You try to write a sample program and see how it works.
    Sojan

  • Post Goods issue - Urgent

    Hi,
    Could anybody give me the steps to create test data for post goods issue to sales order.( general stpes in brief)
    Regards
    Sai

    Hi Sai,
    PGI (Post Goods Issue) is done after picking.
    Picking is done after the delivery.
    Once PGI is performed the stock of the material get reduced.
    So in the sales process,
    Sales Order -> Delivery -> Picking -> PGI.
    Kindly, check the following link:
    http://help.sap.com/saphelp_47x200/helpdata/en/dd/560a80545a11d1a7020000e829fd11/frameset.htm
    below are the steps to create test data.
    1)create a sales order based on your condition from va01(OR,RO Etc..) then save the order.
    2)Now from va02 go to inside of the va02 then from menu bar sales document-->deleiver.
    3) Now From vl01n eneter the shippment point band save now delievry number will come.
    4)from vl02n u click on POST GOODS ISSUE TAB.
    Regards
    Kiran Sure

  • Delivery creation during transfer postings and posting changes

    Dear Experts,
    Whenever i am posting a transfer posting with movement type 412 'Q' in a HUM managed storage location it is creating a outbound delivery. Basically this is a posting change and the system should not create a delivery. I want to prevent the creation of a delivery in this case.
    What are  the settings that creates a delivery whenever a transfer posting is performed without reference to a STO or a PO. Any posting happening with MB1B or MB11 that results in a delivery. PLease let me know the exact settings to look out for.
    Thanks in advance for your feedback.
    Raj

    SPRO>LOGISTICS GENERAL>>HANDLING UNIT MANAGMENT> BASICS>MATERIAL MANAGEMENT>INVENTORY MANAGEMENT>SET QMCHECK AND DELIVERY TYPE FOR EACH MOVEMENT TYPE
    THIS IS THE NODE WHICH IS RESPPOSIBLE FOR THE SETTINGS OF DELIVERY CREATION
    ALONG WITH THE ABOVE NODE THE NODE FOR HU REQUIREMENT FOR STORAGE LOCATION AND DEFAULT VALUE FOR DELIVERY IS RESPONSIBLE FOR THE OUTBOUND DELIVERY CREATED IN YOUR CASE
    Edited by: Sap: IN on Aug 17, 2011 7:00 AM

  • Bapi for Picking, Packing and Post goods issue (WS_DELIVERY_UPDATE)

    Hi,
    I have a requirement to update the outbound delivery. In that, I need to update the picking, Packing details and have to complete the PGI for the particular delivery. I got the suitable function module for the same is : WS_DELIVERY_UPDATE.
    Can anyone tell me what parameters should I need to pass to perform my above requirements.
    Thanks in advance.
    Regards
    Ramesh mavilla.

    I can Update picking and PGI using the above BAPI. But I am unable to create the Handling Units properly with the above mentioned BAPI befor PGI.  Can any one help me ASAP.
    Thanks
    Ramesh mavilla.

  • EWM- serialnumbers posting goods recipt, error in qRFC queue.

    Hello
    We have a problem and dont know where to look at the moment. The problem is we make a purchaseorder, for a serialized material, we make an inbounddelivery in vl31n where we specify the serialnumbers. This delivery is transferd to SCM system and made into a warehouserequest, which we make into an order and then a task and we confirm the task. Then we can see the serialnumbers in the bin and the availible stock. But R3 is not updated with the GR. In the qRFC queue outbound SCM we get the error message "Document incomplete : You cannot save the delivery"
    There is obvious something wrong with how r3 is updated, probably something with the inbound delivery, if we delete the line with the error in the outbound queue the inbound delivery is confirmed with 0. That means that there is created a difference between the warehouse and the IM system.
    Does anyone have any suggestions to what we have missed, we are not using HU.
    Regards
    Ivar

    We ended up with using standard WM since EWM seemd at that time not to be a complete stable solution.

  • Need User Exits for Creation of Delivery and for Posting Goods Issue

    Hi,
    I need User Exits for
    Creation of Delivery
    Posting Goods Issue
    I need to make some checks regarding customer license expiration and if checks fail, I need to stop Creation of Delivery and Posting Goods Issue.
    Thanks in advance,
    Will reward,
    Mindaugas

    In the delivery you can use userexit USEREXIT_SAVE_DOCUMENT_PREPARE to make your checks and send an error message to the user in case they fail.
    You can find this user exit (form routine) in include MV50AFZ1.
    Hope that helps,
    Michael

Maybe you are looking for