Reg:creation of storage bin

hi,
i have created storage bin already with two or three coordinates, i have some requirement that it is possible to create six coordinate bin. if so then what is the possible standard template for that, and how much we can extend the coordinates.
Regards
Muthuraman.D

Give examples of the two or three co-ordinates and what you want to extend?

Similar Messages

Inspection lot creation on storage bin

Hello all,
I am wanting to learn how to create an inpection lot of stock within a storage bin.
I ask because we have many storage bins in our warehouse location storing the same material.
If I do a MIGO 322 transaction in inspection lot there is no where to specify bin location, it looks at the warehouse as 1 storage location.
In the lower half of the migo screen there is a 'storage bin' section but it is blocked out and I cannot identify which storage bin I am wanting to inspect within that storage location.
I know I can create a transfer through LT01 however this still doesn't appear in QA32 inspection lots.
I want the bin location to stay in the same storage location but be flagged for quality inspection.
Thanks,
Chris
Edited by: gmanwizo on May 7, 2011 5:58 AM

Hi,
It seems you have both MM and WM activated. You have to assign storage locations to warehouse numbers in customizing, definition of organization step. Then when you do a 322, transfer requirements will be created by the system and you can transfer the material to a storage bin by turning the requirement into a transfer order. Assignment of new storage locations to warehouses may be tricky, you better ask for consulting on this matter.

Creation of Mass Storage bin

Hi,
We need to created storage bin for warehouse. we were planning to use LSMW. We cannot use auto creation of stroage bin LS10 since the numbers are not in a proper sequence.
However we need to add value to the field 'Sort fld pick' for every storage bin which will be used latter for sorting the storage bin in pick list.
This field is not available when u create storage bin. This field is only avaialble when u are change mode after creating the storage bin.
Also we cannot use the customization for define sort sequence for stock removal.
Can anybody help me how to fix the issue.
thanks in advance
Regards

Hi,
Storage Bins creations and Sort fld stck plcm/Sort fld picking are all master data maintenance, to maintains these you need to create LSMW or BDC. There is now option on customization etc.
let me know if you have any more questions.
Regards,
Madhu

Storage bin Type Change during TO creation

Hi friends
Is it possible to change Storage Bin type (Not Storage bin no)during Transfer Order (TO) creation in LT06 / LT04 ? If so please let em know the procedure to bring storage bin type during TO creation.
Please confirm
Rgds
Madhavan

Hi,
Please check and try to define Storage Bin Type (SPRO->LE->master data->storage bins), then activate Storage Bin type search strategy in OMM1.as appropriate. (in my past experience system given priority to Storage type search and then to Storage BIn type search during picking- I am not sure whether this is the SAP logic or priority).
Once you define and assing the Storage bin type to Bins this will be available during creation of TO.
Hope this helps.
Thx
MJ

Storage bins creation in production server

Hi Gurus,
After transporting the request for the automatic storage bin structure from Quality to production, how can i create the bins by using that structure in production?
is the same way like how we are creating in normal process (Select the Structure and choose the Environment and click on create bins and the Choose the On line creation then over)?
can any confirm it?

Hi
You can use same method as in Dev , For automatic Creation u can use t code LS05

Storage bin creation through LS05.

Hello Experts,
we are using barcodes and I have to create storage bins. For this Verification is mandatory through LS05 or can we create thorugh LS10.
I observed that in LS05 screen, sequence number and what does it indicate.
Can any boyd please send the information or link for storage bin verirfication and creation thorugh LS05.
Thanks
Raghu.

Thanks you Swagat and night for your reply!
Here what is the use of verification and do we have to update any master data for this purpose and in LX45 screen it is asking Bin coordinates, in that field what exactly we have to fill.
Thanks in advacne.
Raghu

Online Storage bin creation

Hi,
I have few doubts in WMS area and they are
1. When we create Picking area and without picking area can we do the outbound delivery activities. What the relation between shipping point and picking area.
2. While creating storage bins which option do we use, i.e. Create storage bins immediately or on batch mode. If we have to
create in batch mode which batch job we have to schedule. Which one is client prefferable immediate creation or batch creation.

Answer to your second question is that ,
Either you can created through bin structure i.e LS10
Secondly create program with LS01N transaction to load as many bins as you want.
This is your choice.
Regards,
Prashant

Creation of New storage bins for storage type 007 in Production

Hi Gurus,
Coudl you please give me a clairty, storage bins can transport from Qaulity or we have to create seperately from server to server like Qulity and production.
thx
r

Hello,
As correctly mentioned storage bins never transported from one environment to other. You have to create through LS10 or LS01N.
The bin structure can get transposted from one environment to other & then you can open the structure & create bins in numbers.The bin structure can be seen through LS10 & created through same transaction.
Regards,
Prashant

Reg : creation of bin

hi,
i have created storage bin already with two or three coordinates, i have some requirement that it is possible to create six coordinate bin. if so then what is the possible standard template for that, and how much we can extend the coordinates.
Regards
Muthuraman.D

hi jurgen,
The requirement is floor1-floor2-aisle1-rack1-line1 l-bin1.so what are all the possible coordinates(structure) maintain for that....could you please give some detail solution.
Regards
Muthuraman.D

Error in Production Order creation : No Production Storage Bin could be fou

Hi Experts,
I am creating Production Order for a Warehouse Managed Material. On saving the Material, it is resulting in an error saying " No production storage bin could be found (8005 RX1 000000000001802347)u201D
Message No : LP 093.
I guess some master data is missing. Please give some inputs on closing this.
Thank you,
Regards,
Ramakrishna

Hi Jurgen,
As such no Control cycle is exsing for this combination. We are in an Upgrade Project from ECC 5.0 to 6.0 . I am wondering, how this is working in ECC 5.0 with out control cycle as well. Will there be any other possibility
Thank you,
Regards,
Ramakrishna

Storage bin creation

Dear Experts,
Can any one explain me how to create storage bin.
Thanks in advance,
Regards,
Krish

Hi
Spro>logistics general>Warehouse management>Master data>storage bins>define storage bin structure
define storage bin structure
Double click that structure
Environment Tab>create bins>inside that ther is one option called "Create storage bins online"
Based on the structure you defined number of storage bins created
Reward points if useful
Regards
Amuthan M

Interim storage bins creation, List of standard interim storage bins

Hi,
We need to create interim storage bins as part of cutover. can someone provide me list of standard interim storage bins to be created. Which transaction will be used to create interim storage bins
Thank you

Hi,
You can use the transaction LX20 to create interim bins.
Following interim bins will be available in the standard.
001     901    WE-ZONE
001     902    WE-ZONE
001     910    WA-ZONE
001     917    QUALITAET
001     920    UML-ZONE
001     921    UML-ZONE
001     922    U-ZONE
001     980    DUMMY
001     998    AUFNAHME
001     999    DIEBSTAHL
001     999    SCHROTT
Thanks & Regards,

Cancel (reverse) Return Order, PGR not possible due to storage bin in 904

Hi gurus hope someone can explain in detail with transaction what am I missing since I'm MM guy and dont know very well SD transactions but here's my scenario,
There is a return order with a delivery (1110500002), then PGI (651), this drive me to process a Tansfer Req to move it from 904 to 010 storage type, and then do the billing, up to here the process is going well.
The problem comes when trying to reverse the above described process, I start with reverse the bill sith VF11 and then try to cancel the PGI ( PGR) with VL09 but system says "Storage bin 001 904 1110500002 does not exist (Check your entry)"
This is why I'm trying to fix the issue as MM guy, but I don't know why the error comes, this bins in 904 should be dynamic and create temporaly the bin 1110500002 which is the delivery that was created when the first return order was created.
I dont know if this error is related to MM movement types or to some config at the delivery type, o maybe the process we are following is not the correct for this because in transaction OMLR for IM 651 there is WM 651 but for 652 IM it's WM counter part is the general GI 255 mvt type so
Just to mention what I think that need to happen for the reverse of the return process is to cancel the bill then cancel the delivery and at this point negative stock should come into 904 bin 1110500002 and the creation of a TR to move from 010 to 904 after doing this TO then stock in 904 will be zero.
Please advise on how this process should happen.
Regards.

Hi TQ,
Thanks for your reply, but I didn't understand what you mean with compare material master, compare it with what? And also I am not really sure that this could be the problem because I have this issue only when reversing the return, this means when I do the return the stock actually goes to 904 1110500002 so this means that the material has mantained correctly WM views in the material master.
Can you elaborate more in detail how you solved your error few months ago?
Thanks and regards

Re: Creation of storage location for halb which was not assigned primarily

Creation of storage location for halb, every thing processed with raw materials for production orders reg fert and even settled. Later a storage location is to be created for halb. When I created storage location for halb and when I want to post initial stock through MB1C I am getting error saying material type and storage location not maintained. Can any one solve my problem. Thanks in advance.

Hi Vachanala,
Are the material masters of your materials extended to the new storage location / have you defined automatic creation (for movement) in customizing (SPRO > Material Manegement > Inventory management & PI > Automatic movements > Create Storage Location Automatically)?
If the material masters are not extended you can't book those materials to that SL.
BR
Csaba
<b>material master</b>
http://help.sap.com/saphelp_46c/helpdata/en/ff/515ee849d811d182b80000e829fbfe/frameset.htm
<b>automatic creation of storage data</b>
http://help.sap.com/saphelp_46c/helpdata/en/a5/6330f243a211d189410000e829fbbd/frameset.htm

Change Storage Bin Number in 309 movement type

Hi Gurus,
I have problems with creation TO for movement type 309(material to material posting), when i want to create the TO for that movement type, i can't change the destination bin.. The destination bin field in that TO is disable, how to make that field enable?
I try to add an user exit after creation of that TO, the user exit is MWMTO001.. so the user exit used for change the storage bin number after the TO created.. but that user exit never triggered after TO created.. How it could happen?
Any suggestion, how to change the storage bin number when i want to create TO from 309 movement type(material to material posting)?
Kind Regards
Ken

Hi Kris,
Ya, i already create the bin number, for example i material A fixed to bin 00001 and material B fixed to bin 00002, when i do movement 309 from material A to material B, why the bin goes to 00001? why not goes to bin 00002? Because material B is fix to bin number 00002..
For your solution, i just can change the bin during confirmation of the TO? Because, in this case, confirmation of that TO done by external system, so the external system will send idoc to SAP to confirm that TO..
Regards
Ken

Reg:creation of storage bin

Similar Messages

Maybe you are looking for