Reg: Diff between SAP business suite and Business One

Hi Guru,
We are planning to implement SAP in our industry.
Now we are planning to implement SAP Business one. After three years we will bring in complete SAP implementation.
1.Can you please tell the difference between complete SAP Implementation and SAP B1.
2.Could you please explain, if we implement SAP B1 right now. will there be any problem if we go for complete implementation.
3.If the business grows above one billion,will B1 hold good?
4.What is the business suite?
Thanks & Regards,
S.Nehru

Nehru,
thank you for considering SAP solutions.
W regards to question 1 and 4, in short:
SAP Business Suite on traditional relational databases or on HANA is the most extensive SAP set of SAP Business application and includes the SAP applications ERP, CRM, SCM (Supply Chain) SRM (Supplier Relationship) and PLM (Product Lifecycle)
A1 is based on SAP Business Suite and tailored by SAP partners.
B1 is a separate product, so is Business by Design.
All solutions are integrated and used by the largest global enterprises and their subsidiaries as well as by SME small and midsize enterprises, depending on their requirements.
Please see Solution overview of SME solution for more details on A1, B1 and Business by Design.
In addition to the Business Applications, SAP also offers Business Networks Solutions like ARIBA and Concur.
The majority of SAP customers are SME customers: At the end of the third quarter of 2014, SAP has more than 263,000 customers, of which more than 80 percent, or 212,500, are SME's.
Without knowing more details, it would be not professional from my site to provide an answer to your question 2 and 3. Please work with your local SAP partner or SAP Account Executive to validate your approach.
Thank you
erich

Similar Messages

  • What is the diff between SAP Netweaver B1i and B1i that comes with SBO 2007

    Hi
    There is SAP Netweaver B1i which is used for integration with SAP R3. But when you get SBO 2007 it also comes with B1i. Is there a difference or is it the same tool??
    Thank you for your time.

    Louis,
    B1i on the SAP Business One 2007A Preview release is the same as B1i 2005A as far as what it is and how it works with relation to integrating SAP Business One and R/3.  There are new features that are part of B1i 2007A of course that are not in 2005A such as integration with SAP BW, an updated Control Center as well as some other features such as the installation and upgrade routines.  You should have a look at the documentation in the ..\Documentation folder and specifically in the "Integration" and "PEP" folders on the preview media.  This is also, as mentioned, the PREVIEW version, so there will be updates to it forth coming before general release.
    HTH,
    Eddy

  • Diff between Business System and Business Service

    What is the Difference b/w Business System and Business System and whne we use them?

    Hi,
    Business System : is a logical entity assigned to a Technical System in a SLD
    Business Service: is an Abstract entity without having assigned to a Technical System in a SLD
    for more:
    Business System: http://help.sap.com/saphelp_nw70/helpdata/en/42/c817d9d2296bb2e10000000a1553f6/content.htm
    Business Service: http://help.sap.com/saphelp_nw70/helpdata/en/c7/301640033ae569e10000000a155106/content.htm
    Also,There is already lot of thread regarding the same discussion, please see it below.
    Business service or Business system??
    Re: Business Service <--> Business System
    Difference between Business service, Business system and Business process
    Business Service vs Business System in Integration Directory.
    Business Service (vs) Business System in Integration Directory.
    What is the difference between Business System and Business Service?
    business system and business service
    Diff b/w Business service & Business System?
    Regards
    Aashish Sinha
    PS : reward points if helpful

  • Diff between Business service and Business System?

    HI Experts,
      Pls let me know wht is the difference between business service and business system??
    when we will have to go for business service and when for business system??
    thnx in advance..
    New XI

    Hi,
    Difference between Business Service and Business System are :
    1) Business sytem require all details like login user id
    password require to create but in case of business service
    log in details does not require..
    2) A Business System  is purely for SAP-Systems and
    Business Service for Non-SAP systems
    3) Business service refers to any business applications where
    as the business system is defined in SLD(System Landscape
    Directory)
    4) When we have full details of application system the we are
    going to use the business system and it is created in the
    SLD so we dont have authorization to change the business
    system name.
    When we have partial details or no details of Technical
    system then we r going to use the business service. it is
    created in the ID. we can see and change it.
    5) A Business system is something that physically exists
    For example, if u want to download a file from a system
    ABC, by using file adapter and then want to update the
    content of this file into r/3 database by using RFc,then
    the system  abc and the r/3 will be ur business systems
    i.e. they physically exists. Business Systems are
    configured in SLD.
    Business service is mostly usedin B2B Scenario (cross-
    component),where you don't know the Business System of your
    partner. In other words business Service will be used only
    for those partners which do not have a physical landscape
    set up . Business servces do not have an entry in SLD.
    6) A Business Service is an Abstract Unit(which is not in
    System Landscape Directory) addressing Senders and
    Receivers of Messages.
    Physicals systems which use their communication channels
    and routing rules to communicate with other systems are
    called as Application Systems OR physical systems.
    7) In simple when u going for A2A integration then we define
    our Technical systems are Business system. If we r going
    for B2B integration then we dont know the complete
    information about the other end Business Landscape so, we
    configure it as a Business Services. Business system are
    created at SLD. Where as a Business Services are created at
    Integration Directory.
    8) Business systems:
      These are logical senders or receivers that exchange
    messages by using the Integration Server and that are
    entered in the System Landscape Directory.
    The business systems in the System Landscape Directory
    relate to a system landscape. The business systems of
    business partners are therefore not entered in the System
    Landscape Directory. To be able to address such business
    partners logically, use communication components in the
    Integration Directory. A business system is a way of
    specifying a communication component in the Integration
    Directory more precisely (business system component).
    Hope this will hwlp u..
    Regds,
    Pinangshuk.

  • What is the difference between E-Business suite and people soft enterprise

    hi every one
    I want know what is the difference between E-Business suite and people soft enterprise

    These are two different ERP systems - the former developed by Oracle and the latter by Peoplesoft (before it was acquired by Oracle).
    http://www.oracle.com/us/products/applications/ebusiness/018714.htm
    http://www.oracle.com/us/products/applications/peoplesoft-enterprise/018725.htm
    HTH
    Srini

  • Difference between Business system and Business service.

    Hi All,
    Can any one explain in detail difference between Business system and Business service.
    As we commonly say, Business service is for those system which are not in our landscape.
    Can any one explain in which particular scenarios we will go for Business Service.
    Reg
    Bapuraj

    Hi Bapuraj,
    Business System
    Business system is a logical system, and there is an importance on physical existence of the system.Also SLD entry is required.
    It is generally used for SAP applications, this is just a general prinicple followed but not mandatory.
    Business Component(formerly Service)
    You use a Business Component, when you do not have the System details of the the partner system to which you want to communicate. i.e. you have not configured the partner system in SLD.
    Business Service is an Absract Unit with Sender and Receiver Interfaces,In this case you need to explicitly add the message interfaces while doing configuration in ID.
    It is generally used for NON-SAP applications, this is just a general prinicple followed but not mandatory.
    <REMOVED BY MODERATOR>
    <LINKS CAN BE SEARCHED FOR BASIC QUESTIONS>
    -santosh.
    Edited by: Prateek Raj Srivastava on Jan 12, 2012 10:01 PM

  • Diff b/w Data warehouse and Business Warehouse

    Hi all,
    what is the Diff b/w Data warehouse and Business Warehouse?

    hi..
    The diferrence between Datawarehousing and Business Warehouse are as follows.
    DataWarehousing is the concept and BIW is a tool that uses this concept in Business applicaitons.
    DataWarehousing allows you to analyze tons of data (millions and millions of records of data) in a convinent and optimum way, it is called BIW when applied to Business applications like analyzing the sales of a company.
    Advantages- Consedering the volume of business data, BIW allows you to make decisions faster, I mean you can analyze data faster. Support for multiple languges easy to use and so on.
    Refer this
    Re: WHAT IS THE DIFFERENCE BETWEEN BIW & DATAWAREHOUSING
    hope it helps...

  • Difference between business service and business system in SLD

    hi all,
    i m very new to XI. can anybody tell me that what is the basic difference between Business Service and Business Systems?
    Is it necessary to use them? and if yes then when to use what?
    Thanx.
    Regards,
    Kunjal......

    Hi Kunjal,
    In SAP XI every system in your landscape with which you are interfacing is defined as Service.
    The service can be your Business service or Business system.
    Generally SAP systems are referred to Business system and you define them in the SLD before you import them.
    The Business service is a logical name referring to any system in your landscape.
    To communicate with any third party application you need to create communication channels which are associated to your service.
    More about this here:
    http://help.sap.com/saphelp_nw04/helpdata/en/7d/6b82cd0d1aef48ab5953524c9cc5b2/content.htm
    Regards
    Vijaya

  • Whats the actual difference between Business system and Business service

    whats the actual difference between Business system and Business service

    Business System
    1) Business system is a logical system, and there is an importance on physical existence of the system.
    2) Also SLD entry is required.
    3)It is generally used for SAP applications, this is just a general prinicple followed but not mandatory.
    4)This is defined as part of the SLD and is a physical system whose parameters are well defined.
    5(Business systems refers to the physical systems, for instance the R/3 system. You define the business systems in the SLD
    Business Service
    1) You use a Business Service, when you do not have the System details of the the partner system to which you want to communicate. i.e. you have not configured the partner system in SLD.
    2) Business Service is an Absract Unit with Sender and Receiver Interfaces,In this case you need to explicitly add the message interfaces while doing configuration in ID.
    3) It is generally used for NON-SAP applications, this is just a general prinicple followed but not mandatory.
    4) This is not defined as part of SLD and whose technical parameters are not completely known.
    5)Business service is used when the message is not addressed to a business system. It is used mostly in B2B scenarios.
    Also go through these links and threads...
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
    Business service or Business system??
    Business Service vs Business System in Integration Directory.
    Best Regards

  • Reg. the Business Service and Business System(Integration Directory).

    Hi,
            I have a small doubt reg. the Business Service and Business System. When do we need to go for creating a Business Service AND a Business System? I want to know the difference b/w them and the usage of a Business Service as compared to a Business System. Generally I create Business Systems in my configuration scinerioes. Could anybody pl. clarify on this?
    Regards,
    Murthy

    Murthy,
    It's been already discussed so many times, Juz give a search option in the thread, you will find a lot.
    Anyhow,Please refer the below threads.
    Re: Business Service <--> Business System
    Business service or Business system??
    Business Service and Business system
    Diff b/w Business service & Business System?
    Business Service / Business System
    business system and business service
    Best regards,
    raj.

  • How to find the mapping between External Object Name and Business Obj.

    Hello Gurus
      Anyone who can help me? I would like to know is there any way to know Business Object is behind object associated to Context Node, it seems that for some cases is easy but for instance for object BuilHeader is not the case, at least for me.  View BP_ADDR/StandardAddress, which belongs to UI Component BP_ADDR, has context node HEADER which is associated to BuilHeader. In case to enhance that object (to add new attributes), using EEWB, I need to know what is the business object behind that external name. Somehow I cannot find the mapping between external name BuilHeader and Business Object. 
      Kind regards
    Aleksandar

    Hi Aleks,
    If you want to enhance Business Partner, the object you are looking at should be "BUPA" in EEWB. To my knowledge, there is no place where this kind of mapping is maintained.
    Note 484597 describes where to find the Cookbook  which describes the enhanceable objects and the enhancement process.
    In case your requirement is to add table attributes, you can also  take a look at the wiki link:
    http://wiki.sdn.sap.com/wiki/display/CRM/EEWB-AddingTableattribute
    Regards,
    Nisha

  • What is the difference between Business System and Business Service?

    Hi
    Please tell me what is the difference between Business System and Business Service...? In real time at what situation we will use Business System and in what situations we will use Business Service..? Please help me
    Best Regards
    Ravi Shankar B

    HI,
    Business system:
    If you want to address a particular business system as the sender or receiver of messages, choose this service type.
    A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
    You usually use business system services when configuring internal company processes.
    Business Service:
    If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
    Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
    You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details. 
    For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.
    Regards,
    Sudheer.

  • Difference between Business service, Business system and Business process

    Hi,
    Can anyone tell me the difference between Business service, Business system and Business process?
    Thanks,
    Harikumar. S

    Hi,
    <b>Business system</b>
    It is a logical system from a business point of view.
    One or more logical systems that belong together from a business point of view is called a group of Business system group. A business system group represents a unit within a company or organization that can be defined according to legal, economic, administrative or geographic factors.
    The objects in a business system group are uniquely identified by a uniform numbering system.
    <b>Business process</b>
    Business procedure within an enterprise that uses resources and can involve activites from a number of different cost centers in a controlling area.
    When executing a business process, activities can be utilized for several cost centers of a controlling area.
    <b>Business service</b>
    It’s a third party system.
    All these belong to a Business Scenario which is
    Description of the flow of business processes according to a business typology. A business scenario represents a template for a business process, which runs within a particular area of a company process. All processes required to completely process the task are listed in chronological order in the scenario. Business scenarios can be described graphically, in either aggregated or detailed form (EPC). Example: Direct sale to industrial recipient
    <b>**DO REWARD POINTS IF THIS IS HELPFUL FOR YOU**</b>
    Regards
    AK

  • Diff between sap query and abap query

    diff between sap query and abap query

    Hi,
    ABAP query is mostly used by functional consultants.
    SAP Query :
    Purpose
    The SAP Query application is used to create lists not already contained in the SAP standard system. It has been designed for users with little or no knowledge of the SAP programming language ABAP. SAP Query offers users a broad range of ways to define reporting programs and create different types of reports such as basic lists, statistics, and ranked lists.
    Features
    SAP Query's range of functions corresponds to the classical reporting functions available in the system. Requirements in this area such as list, statistic, or ranked list creation can be met using queries.
    All the data required by users for their lists can be selected from any SAP table created by the customer.
    To define a report, you first have to enter individual texts, such as titles, and select the fields and options which determine the report layout. Then you can edit list display in WYSIWYG mode whenever you want using drag and drop and the other toolbox functions available.
    ABAP Query,:
    As far as I Believe, is the use of select statements in the ABAP Programming. This needs a knowledge of Open SQL commands like Select,UPdtae, Modify etc. This has to be done only by someone who has a little bit of ABAP experience.
    To sum up, SAP queries are readymade programs given by SAP, which the user can use making slight modification like the slection texts, the tables from which the data is to be retrieved and the format in which the data is to be displayed.ABAP queries become imperative when there is no such SAP query existing and also when there is a lot of customizing involved to use a SAP Query directly
    use either SQ02 ans SQ01
    or SQVI tr code
    for more information please go thru this url:
    http://www.thespot4sap.com/Articles/SAP_ABAP_Queries_Create_The_Query.asp
    http://goldenink.com/abap/sap_query.html
    Please check this PDF document (starting page 352) perhaps it will help u.
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCSRVQUE/BCSRVQUE.pdf
    check the below link will be helpful for u
    Tutorial on SQVI
    once you create query system generates a report starting with AQZZ/SAPQUERY/ABAGENCY2======= assing this report to tr code for the same
    regards,
    vasavi.
    reward if it is helpful.

  • Difference between operating concern, segment and business area

    hi,
    can any one tell me the diffrence between operating concern, segment and business area with example.
    regards,
    ankur

    Hi,
    Operating concern is the highest level of hierarchy in controlling area.  Operating concern used to
    do analysis on PCA (Profit Center Acctg) / CO-PA.  This is basically used for the analysis of parameters, like measuring
    internal profit of a SBU, Sales data analysis (COPA).They can even be used for Analysing balance sheet items
    (Stocks,Assets,cash etc.)
    Segment- financial report information by line of business and geographical area
    business area- equivalent to a specific area of responsibility within your company or business segment.  This can be used for both internal and external reporting
                          Business areas are primarily used to facilitate external segment reporting across company
    codes, covering the company's main areas of operation (product lines, branches)
          organizational units in FI module are ( in sequence): Client, company code, business area, company, credit cotrol area, funds
          management area, dunning area, chart of accounts and controlling area.
    Thanks,
    Rod

Maybe you are looking for