Reg: DIFFERENT CONFIRMAYION TYPES IN C011N
Hi Friends,
In CO11N, we can observe there are three confirmation type,
1.Automatic Final Confirmation,
2.Final Confirmation,
3.Partial Confirmation.
And how to carry out partial release..
Dear
Are you looking for Partial Confirmation ?? Or parial release of operation ??
Please elaborate your requirement .
However , in CO11N screen , it will be by default alsways Partial Confirmation becase of OPK4-Deifne cpnfirmation parameter set up in Genera lndiviaul Entry confirmation type keep it "Partial Confirmation" .Also confirmtion profile (OPK0) - in default tab, mention the 'partial confirmation ' as the confirm type
Hope it helps
Regards
JH
Similar Messages
-
Join columns of different data types
Can i join two columns of different data types in a single statement. Is there any cast or convert statement
SELECT B~PARTNER AS RESP_GROUP
FROM BUT000 AS B
INNER JOIN CRMV_LINKPARTNER AS C ON BPARTNER_GUID = CPARTNER_NO.
Here PARTNER_GUID is Raw 16 and PARTNER_NO is Char 32, the query is not returning any rows.
Thanks
Akila.RHi!
Basically we can say, you can't join them, but you might try this way:
SELECT B~PARTNER AS RESP_GROUP
FROM BUT000 AS B
INNER JOIN CRMV_LINKPARTNER AS C ON BPARTNER_GUID = CPARTNER_NO(16). "add
(16)
Or an other version
C~PARTNER_NO+16(16) "depends on, where is the real number stored
Regards
Tamá -
Saving cluster of different data types to a file
Hi,
I use LV 8.6 SDK. I need to save clusters of different data types to a file on a disk, row by row.
To be specific: I have a program that performs various investigations on a signal collected by DAQmx. Each time the quality of the signal is not in a specified boundaries, i get an indication. It is a cluster of time stamp, string, dbl, and Boolean. The program is supposed to run for few weeks in a row so there can be a lot of these indications. I expect to have around 200 000 rows a week (Altogether, divided into several groups).
I thought about TDMS but I am not able to save such a cluster. And I would like to save it as tdms cause i could divide the data to different groups. I also thought about data base but that would be the first time i use db and I really do not have time to learn that now.
I know it is possible to change some of the data types to others, ex Boolean to 0-1, but i need a string and a time stamp there.
Can someone advise me which data format should I use? Which one is the best one in this situation?
Thanks in advance
handreIf you do not need to access data from another application (other than Labview) you can just save it as a binary file.
It is the best choice (for me).
I made an example with one cluster. You can replace that with an array of clusters, of that data type.
Attachments:
Example_VI_BD.png 2 KB -
Store values of different data types into single database field
Hi Friends,
I have to store values of different data types(character, numeric, date, time, text, etc) into a single database field(Char 80). Then read the same values and display it into ABAP Webdynpro report.
Appreciate any ideas, examples, suggestions.
Thanks
JBHi,
Try like this:
data: txt1 type string,
var1(1) type c,
var2(1) type n,
var3 like sy-datum,
var4 like sy-uzeit.
parameters: a type c,
b type n,
c like sy-datum,
d like sy-uzeit.
concatenate a b c d into txt1.
write txt1.
var1 = txt1+0(1).
var2 = txt1+1(1).
var3 = txt1+2(8).
var4 = txt1+8(8).
write: / var1,
/ var2,
/ var3,
/ var4.
Regards,
Bhaskar -
I have Acrobat, my coworkers only have Reader. Company won't purchase Acrobat for the other employees.
I built a form for my coworkers to fill out. We need them to be able to send the filled out form to clients, but we don't want the clients to be able to edit the forms.
I understand people with only Reader can't flatten the document, or add a password, or save it as non editable. As I understand it, even with Acrobat I can't assign a password for Reader users to be able to edit or not edit a file (PLEASE correct me if I'm wrong on that one).
Is there any way to save the PDF form once it's been filled out (in Reader) as a different file type? Even an image? The file we send to clients doesn't have to be a PDF. Just something that most people can open.
I tried inserting the PDF into a word document (unreadably pixelated) and tried taking a snapshot of the entire page (resolution too low). I've tried downloading one of the free PDF writers and it apparently won't work with our network security (or something along those lines). I've tried using the pdf writer for Firefox on the form once it was filled out, and that won't work either because our network firewall seems to be blocking it and that's not something they are willing to take down.
Any advice?The signature WILL work! I've just looked into it more, thank you so much for pointing me in that direction.
I get it now, it locks the form fields in place after my coworker fills them in and signs it (as the very last step).
I wish I would have asked on here a full day ago. Would have saved a lot of headache and Googling.
Thanks again. -
Different movement types in MM documents in SSR
Hello,
How can I use different movement types in logistic documents for meter readings?
I set up additional meter event for own consumption and I need to get logistic document with other movement type (as standard we running creating logistic document types an 251/252 movement types for fuel sales).
To realize at least those two types of sales wehave only two possibilities in the system:
1. Setup separate processing profile for location for purpose of own consumption.
The stop over point is only one processing profile can be assigned to the location at once.
2. Setup a new process with new movement type.
The stop over point - restriction in the customizing - only one main process can be used for posting based on meter readings (error message OQ_C601 "More than one entry selected as main MM process for location indicator 01").
How can I solve this issue?
Thanks and KR,
SergeySolved
-
Different Material Types in different Plants
Hi,
I have 2 Plant under a Company Code. A material being produced in plant A has to be sent to Plant B for further processing. I would like to maintain single material master for both the plants, but different Material Types. Material has to be treated as Finished Goods in Plant A and Raw Material at Plant B. Could any one please let me know how I can MAP it in SAP.
Regards,
Nagaraja Achar.Hi,
For the Same material Code you can not maintain two material types in two plants..
But you can make a Z* mat type with all the relevant views of FG & ROH..
For Plant 1 it will have all the views
and for Plant 2 extend only the ROH relevant views...
Thx
Raju -
Different chart types in one chart
Hi guys,
I need to know if there is any wat to mix two different chart types in WAD.
For instance, I have to key figures and I want to draw in the same chart Lines for one KF while I want Bars for the other KF.
Is this possible ?
Regards,This is done using the Secodary Axis. Check the following link.
http://help.sap.com/saphelp_nw70/helpdata/en/0b/ac553bf3a76258e10000000a114084/content.htm -
Print in different page for different material type in Sapscript
Hi all
How do I do the above matter?
Currently I have a script that print all material according to some condition.
My client request to have a different page of material list for different material type.
Please advise
azHi,
1) Sort the internal table by material type.
call func 'OPEN_FORM'.
loop at itab.
at new mattype.
if mattype = 'A'.
call fun 'START_FORM'.
exporting
page = 'PAGEA'.
elseif mattype = 'B'.
call fun 'START_FORM'.
exporting
page = 'PAGEB'.
endat.
call func 'WRITE_FORM'.
AT end of mattype.
call function 'END_FORM'.
endat.
endloop.
call function 'CLOSE_FORM'.
Thanks,
Nethaji. -
Posting of cross company transaction with different doc types
Hi,
The scenario is:-
We have two companies X and Y.
X makes a payment to Y with the following FI entries:-
Company Code X
Dr Vendor Y
Cr Bank HDFC
Company Code Y
Dr Bank ICICI
Cr Customer X
Now this needs to be a cross company transaction where the doc type for CC X should be vendor Payment 'KZ' while the doc type for CC Y should be a customer reciept with doc type 'DZ'.
Although I am able to map the accounts in cross company code config I am not able to split the transaction of different company codes with different document types.
Is there any way we can do this in standard SAP?
Thanks in advance,
NitishHi
As per your issue ...There are no possibilities to post in sap with different document types.
If you want you can post cross company code transactions with one document types
Regards
vamsi -
Posting of Goods Issue for a Delivery (Different movement types)
Hello SD Experts,
We have this process wherein we use Deliveries w/o reference. There's a customization in place for this process, the movement type is determined through the item category of the material.
Given this scenario, my question is if it is possible to process the goods issue of a delivery with multiple item which require different movement types (diffrent items and item categories thus it have different movement types)?
Thank you for your kind consideration.Hello,
Yes, you can.
As you know LO is std delv doc for delv w/o reference.
And I cat determination for that LO delv doc are
Delv Type __ I Cat Group __ Usage __ High I Cat __ Def I Cat __ Man I Cat __ Man I Cat
LO _____________________TEXT ______________ DLTX
LO ________DIEN____________________________ DLX _______DLX
LO ________LEER___________________________ DLN
LO ________LEER________________DLNG_______DLNZ
LO ________LEIS_____________________________DLX_______DLX
LO________ NLAG____________________________ DLX
LO________NORM____________________________DLN
LO________NORM________CHSP_______________DLN
LO________NORM________CHSP____KLN________KLN
LO________NORM________CHSP____TANN______TANN
LO________NORM________PACK_______________DLN________DLX________DLP
LO________VERP____________________________DLN
LO________VERP_________PACK_______________HUPM______DLN
LO ________VOLL____________________________ DLNG
LO ________ WERT____________________________ DLW
Corresponding maintain movement type in Schedule line cat (Tcode VOV6) & determination that in TCode VOV5.
If you want diff movement type then create your own 'Z' Sch line cat with you desired Movement type (Tcode VOV6) and determine the Sch line Cat accordingly in TCoDe VOV5.
Thanks & Regards
JP -
Use of different material types
Hi Experts ,
My client is thinking of expansion of its plant . This new plant would be copy of their already existing plant at another location . Now some of materials for manufacturing finish materials are same in both plants but they both use different material types . That is here there is only one mat type where there they use 4 mat types .
Now do I need to create new plant here or I can use the same existing plant for creation of new materials ? If I want to use the same plant then would be the effect on valuation of mat. Can these mat with different mat types be transported successfully ?Hi Neal,
So you did enjoy your weekend!!! Good good; well you go to IMG ( SPRO ) and on to ENTERPRISE STRUCTURE >> ASSIGNMENT >> LOGISTICS EXECUTION; and just in case you miss out the warehouse number, ENTERPRISE STRUCTURE >> DEFINITION >> LOGISTICS EXECUTION . You will find the links there. Unfortunately I created a screenshot for you but I just do not know how to attach it.
The list I was talking about was MRP List or Stock overview list ( MD05 / MD04 ). There are two more transactions that I think might come in handy. Check them out:
LS26 - stock overview of warehouse.
LL01 - warehouse activity monitor.
Since the plant and warehouse will be linked, I guess there would be no discrimination on checking stock but I am pretty sure system checks warehouse stock first. That is the entire procedure. I hope it helps. Do reward points if I was able to answer your query.
Regards,
Sreekant. -
Same Input name with different data type cause the reflection exception
I have a proxy contains couple RFCs. Two RFCs contain an argument named IN_COMPANY_CODE with data type of ZTRE_FX_BUKRSTable. Another RFC contains the same argument name of IN_COMPANY_CODE but hold different data type (String). All RFCs are in the same proxy. Complie and build the application with no issue.
But when I ran the RFC, it generates the reflection exception below:
Method SAPProxy1.Z_F_Tre_R_Pre_Trade_Fx can not be reflected. --> There was an error reflecting 'In_Company_Code'. > The XML element named 'IN_5fCOMPANY_--5fCODE' from namespace '' references distinct types System.String and MSTRFOREX.ZTRE_FX_BUKRSTable. Use XML attributes to specify another XML name or namespace for the element or types.
I realize the conflict introduced by the same name with difference data type. But I would like to know if this is fixable as a bug or if there is any best practice and/or some manual intervention to make it work.Please install fix from OSS note 506603. After this, right-click .sapwsdl file and select "Run custom tool".
-
Different movement types for goods issue via outbound delivery
Hi gurus,
How can I use different movement types for goods issue via outbound delivery?
Thanks&Best Regards,
BurcuTo use different schedule lines, we need different item types and different document types. Is that right?
Is there a user exit in outbound delivery to post goods issue?
Thanks... -
Different movement types for Goods Issue for different Order Types
Hello Experts,
Can we maintain different movement types for Goods Issue for different Order Types at the time of automatic creation of reservations?
Thanks and regards,
SatyajitSatyajit,
Folow the link given,
Re: How to add new movement types when creating reservation?
Hope this helps you.
SmanS
Maybe you are looking for
-
Background image stretch in html not working if 'never remember history' is choosen
I have a problem that did not exist in previous mozilla versions. I found the problem after installing the most recent version and after setting firefox to "never remember history" The problem is related to the CSS code for stretching a background im
-
How to get rid of the bookmark on my screen and get my whole screen back
TOday apple upgraded the IOS on my ipad since then we are all messed up and lost stuff the thing the most bothersome is that we cant get rid of the bookmark on the screen so we just have2/3 of screen
-
Active Directory Scripting Problems
erufneiruvndirf
-
Go_item doesnot work in a control block having all display items
Hi go_item bulitin doesnot work for a block which doesnot have any enabled items(or say display items only) throwing error " No items on the navigation block". The requirement is to have all items in that block should be display items only. Is there
-
Tumblr pop-up has frozen my App Store app. How to free it up?
Tumblr pop-up has frozen my App Store app. How to free it up?