Reg:Display Cursor Position format

Hi to all,
If we are going to open any database table means we will get the alv list format for output. If we want to choose any record for any field means if we are pointing the cursor to that field means in my system cursor points the single character only.
i want if i point any field of the record means it should points the whole field length.
i had tried through
customizng local layout icon ->options-> and cursor tab for all the options.
But i couldn't make the solution for that.
Reward for helpful points.
Thanks in advance.
Sankar M

Hi,
you should go to Customize Local Layout->Options->Cursor->and uncheck cursor in lists.
Kostas

Similar Messages

  • Time From field is not getting displayed in correct format in Activities

    Hello Experts ,
    We are facing one problem in UI , when we search for Activities in Web UI . In the field "Time From" we are not getting the time in correct format , ie is instead of  getting time as say 13::38 we are getting time as 13::3 , but when we place cursor on it the field it shows correct format say 13::38.
    Can any one suggest how to display in correct format ?
    Regards
    Vinayak

    Hi,
    Its an SAP Product error.
    Please check note 1151821 ,if you facing the greyed button in time.Also the other note 1136402 needs to be applied for time display issue
    - Bobby

  • Pda cursor position property does not work

    Hi!
    I have a problem with cursor positionX propery on PDA.
    I use PDA Module 8.2 and Windows Mobile 5 OS on PocketPC.
    Actually problem is only when I try to get value of two cursors, it return the same value for both cursors (you can test it with attached VI), but when I set values it work fine.
    I have also worked with PDA Module 8.0.1 in past and I remember that get cursor position value worked, so I have no idea why it doesn't work in newer version.
    Thanks,
    andrej
    Attachments:
    cursor test.vi ‏21 KB

    Hello andrej,
    Unfortunately I also see the same behavior on a PDA using this "active cursor" property. It appears to me that this property is not being written successfully. I say this because it appears that the value displayed is always from the most recently repositioned cursor rather than either the 0 or 1 which is set by the property node.
    What I will do at this point is to file a corrective action request so that this behavior is corrected for a future release of the LabVIEW PDA module. I apologize for the inconvenience that this causes for your application. Please let me know if I can help at all as you modify your application to work around this behavior. Thanks,
    Mike D.
    National Instruments
    Applications Engineer

  • DataTable Exception: Invalid operation for the current cursor position

    I have a JSF application that lists rows from a view in a SQL Server database. I have set up a commandLinks in an extra columns.
    The data is displayed properly, but when I select one of the commandLinks I get the "Invalid operation for the current cursor position" exception.
    Here's the source
    Domain.jsp
    <?xml version="1.0" encoding="UTF-8"?>
    <jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
        <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
        <f:view>
            <html lang="en-US" xml:lang="en-US">
                <head>
                    <meta content="no-cache" http-equiv="Cache-Control"/>
                    <meta content="no-cache" http-equiv="Pragma"/>
                    <title>Page1 Title</title>
                    <link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/>
                </head>
                <body style="-rave-layout: grid">
                    <h:form binding="#{Domains.form1}" id="form1">
                        <h:dataTable binding="#{Domains.dataTable1}" headerClass="list-header" id="dataTable1" rowClasses="list-row-even,list-row-odd"
                            value="#{Domains.dataTable1Model}" var="currentRow">
                            <h:column binding="#{Domains.column9}" id="column9">
                                <h:selectBooleanCheckbox binding="#{Domains.checkbox2}" id="checkbox2"/>
                                <f:facet name="header">
                                    <h:outputText binding="#{Domains.outputText9}" id="outputText9" value="Select"/>
                                </f:facet>
                            </h:column>
                            <h:column binding="#{Domains.column10}" id="column10">
                                <f:facet name="header">
                                    <h:outputText binding="#{Domains.outputText4}" id="outputText4" value="Name"/>
                                </f:facet>
                                <h:commandLink action="#{Domains.groupList}" binding="#{Domains.linkAction1}" id="linkAction1">
                                    <h:graphicImage binding="#{Domains.image1}" id="image1" url="resources/images/domain16.gif" value="resources/images/domain16.gif"/>
                                    <h:outputText binding="#{Domains.linkAction1Text}" id="linkAction1Text" value="#{currentRow['name']}"/>
                                </h:commandLink>
                            </h:column>
                            <h:column binding="#{Domains.column3}" id="column3">
                                <h:outputText binding="#{Domains.outputText5}" id="outputText5" value="#{currentRow['description']}"/>
                                <f:facet name="header">
                                    <h:outputText binding="#{Domains.outputText6}" id="outputText6" value="Description"/>
                                </f:facet>
                            </h:column>
                            <h:column binding="#{Domains.column4}" id="column4">
                                <h:selectBooleanCheckbox binding="#{Domains.checkbox1}" id="checkbox1" value="#{Domains.domainviewRowSet.currentRow['enabled']}==1"/>
                                <f:facet name="header">
                                    <h:outputText binding="#{Domains.outputText8}" id="outputText8" value="Enabled"/>
                                </f:facet>
                            </h:column>
                            <h:column binding="#{Domains.column7}" id="column7">
                                <h:outputText binding="#{Domains.outputText13}" id="outputText13" value="#{currentRow['userCount']}"/>
                                <f:facet name="header">
                                    <h:outputText binding="#{Domains.outputText14}" id="outputText14" value="Users"/>
                                </f:facet>
                            </h:column>
                            <h:column binding="#{Domains.column8}" id="column8">
                                <h:outputText binding="#{Domains.outputText15}" id="outputText15" value="#{currentRow['groupCount']}"/>
                                <f:facet name="header">
                                    <h:outputText binding="#{Domains.outputText16}" id="outputText16" value="Groups"/>
                                </f:facet>
                            </h:column>
                            <h:column binding="#{Domains.column5}" id="column5">
                                <f:facet name="header">
                                    <h:outputText binding="#{Domains.outputText17}" id="outputText17" value="Actions"/>
                                </f:facet>
                                <h:commandLink action="#{Domains.editDomain}" binding="#{Domains.linkAction2}" id="linkAction2">
                                    <h:graphicImage binding="#{Domains.image2}" id="image2" title="Edit" value="resources/images/edit.gif"/>
                                </h:commandLink>
                                <h:commandLink binding="#{Domains.linkAction3}" id="linkAction3">
                                    <h:graphicImage binding="#{Domains.image3}" id="image3" title="View" url="resources/images/view.gif" value="resources/images/view.gif"/>
                                </h:commandLink>
                                <h:commandLink binding="#{Domains.linkAction4}" id="linkAction4">
                                    <h:graphicImage binding="#{Domains.image4}" id="image4" title="Delete" value="resources/images/delete.gif"/>
                                </h:commandLink>
                            </h:column>
                        </h:dataTable>
                    </h:form>
                </body>
            </html>
        </f:view>
    </jsp:root>
    Domains.java
    * Page1.java
    * Created on October 28, 2004, 12:45 PM
    * Copyright Gordon.Bell
    package usergroupmgt;
    import javax.faces.*;
    import com.sun.jsfcl.app.*;
    import javax.faces.component.html.*;
    import com.sun.jsfcl.data.*;
    import javax.faces.component.*;
    import com.sun.sql.rowset.*;
    import javax.faces.convert.*;
    public class Domains extends AbstractPageBean {
        // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Definition">
        private int __placeholder;
        private HtmlForm form1 = new HtmlForm();
        public HtmlForm getForm1() {
            return form1;
        public void setForm1(HtmlForm hf) {
            this.form1 = hf;
        private HtmlDataTable dataTable1 = new HtmlDataTable();
        public HtmlDataTable getDataTable1() {
            return dataTable1;
        public void setDataTable1(HtmlDataTable hdt) {
            this.dataTable1 = hdt;
        private JdbcRowSetXImpl domainviewRowSet = new JdbcRowSetXImpl();
        public JdbcRowSetXImpl getDomainviewRowSet() {
            return domainviewRowSet;
        public void setDomainviewRowSet(JdbcRowSetXImpl jrsxi) {
            this.domainviewRowSet = jrsxi;
        private HtmlOutputText outputText4 = new HtmlOutputText();
        public HtmlOutputText getOutputText4() {
            return outputText4;
        public void setOutputText4(HtmlOutputText hot) {
            this.outputText4 = hot;
        private UIColumn column3 = new UIColumn();
        public UIColumn getColumn3() {
            return column3;
        public void setColumn3(UIColumn uic) {
            this.column3 = uic;
        private HtmlOutputText outputText5 = new HtmlOutputText();
        public HtmlOutputText getOutputText5() {
            return outputText5;
        public void setOutputText5(HtmlOutputText hot) {
            this.outputText5 = hot;
        private HtmlOutputText outputText6 = new HtmlOutputText();
        public HtmlOutputText getOutputText6() {
            return outputText6;
        public void setOutputText6(HtmlOutputText hot) {
            this.outputText6 = hot;
        private UIColumn column4 = new UIColumn();
        public UIColumn getColumn4() {
            return column4;
        public void setColumn4(UIColumn uic) {
            this.column4 = uic;
        private HtmlOutputText outputText8 = new HtmlOutputText();
        public HtmlOutputText getOutputText8() {
            return outputText8;
        public void setOutputText8(HtmlOutputText hot) {
            this.outputText8 = hot;
        private UIColumn column7 = new UIColumn();
        public UIColumn getColumn7() {
            return column7;
        public void setColumn7(UIColumn uic) {
            this.column7 = uic;
        private HtmlOutputText outputText13 = new HtmlOutputText();
        public HtmlOutputText getOutputText13() {
            return outputText13;
        public void setOutputText13(HtmlOutputText hot) {
            this.outputText13 = hot;
        private HtmlOutputText outputText14 = new HtmlOutputText();
        public HtmlOutputText getOutputText14() {
            return outputText14;
        public void setOutputText14(HtmlOutputText hot) {
            this.outputText14 = hot;
        private UIColumn column8 = new UIColumn();
        public UIColumn getColumn8() {
            return column8;
        public void setColumn8(UIColumn uic) {
            this.column8 = uic;
        private HtmlOutputText outputText15 = new HtmlOutputText();
        public HtmlOutputText getOutputText15() {
            return outputText15;
        public void setOutputText15(HtmlOutputText hot) {
            this.outputText15 = hot;
        private HtmlOutputText outputText16 = new HtmlOutputText();
        public HtmlOutputText getOutputText16() {
            return outputText16;
        public void setOutputText16(HtmlOutputText hot) {
            this.outputText16 = hot;
        private HtmlSelectBooleanCheckbox checkbox1 = new HtmlSelectBooleanCheckbox();
        public HtmlSelectBooleanCheckbox getCheckbox1() {
            return checkbox1;
        public void setCheckbox1(HtmlSelectBooleanCheckbox hsbc) {
            this.checkbox1 = hsbc;
        private UIColumn column5 = new UIColumn();
        public UIColumn getColumn5() {
            return column5;
        public void setColumn5(UIColumn uic) {
            this.column5 = uic;
        private UIColumn column9 = new UIColumn();
        public UIColumn getColumn9() {
            return column9;
        public void setColumn9(UIColumn uic) {
            this.column9 = uic;
        private HtmlSelectBooleanCheckbox checkbox2 = new HtmlSelectBooleanCheckbox();
        public HtmlSelectBooleanCheckbox getCheckbox2() {
            return checkbox2;
        public void setCheckbox2(HtmlSelectBooleanCheckbox hsbc) {
            this.checkbox2 = hsbc;
        private HtmlOutputText outputText9 = new HtmlOutputText();
        public HtmlOutputText getOutputText9() {
            return outputText9;
        public void setOutputText9(HtmlOutputText hot) {
            this.outputText9 = hot;
        private UIColumn column10 = new UIColumn();
        public UIColumn getColumn10() {
            return column10;
        public void setColumn10(UIColumn uic) {
            this.column10 = uic;
        private RowSetDataModel dataTable1Model = new RowSetDataModel();
        public RowSetDataModel getDataTable1Model() {
            return dataTable1Model;
        public void setDataTable1Model(RowSetDataModel rsdm) {
            this.dataTable1Model = rsdm;
        private BooleanConverter booleanConverter1 = new BooleanConverter();
        public BooleanConverter getBooleanConverter1() {
            return booleanConverter1;
        public void setBooleanConverter1(BooleanConverter bc) {
            this.booleanConverter1 = bc;
        private HtmlCommandLink linkAction1 = new HtmlCommandLink();
        public HtmlCommandLink getLinkAction1() {
            return linkAction1;
        public void setLinkAction1(HtmlCommandLink hcl) {
            this.linkAction1 = hcl;
        private HtmlOutputText linkAction1Text = new HtmlOutputText();
        public HtmlOutputText getLinkAction1Text() {
            return linkAction1Text;
        public void setLinkAction1Text(HtmlOutputText hot) {
            this.linkAction1Text = hot;
        private HtmlGraphicImage image1 = new HtmlGraphicImage();
        public HtmlGraphicImage getImage1() {
            return image1;
        public void setImage1(HtmlGraphicImage hgi) {
            this.image1 = hgi;
        private HtmlCommandLink linkAction2 = new HtmlCommandLink();
        public HtmlCommandLink getLinkAction2() {
            return linkAction2;
        public void setLinkAction2(HtmlCommandLink hcl) {
            this.linkAction2 = hcl;
        private HtmlGraphicImage image2 = new HtmlGraphicImage();
        public HtmlGraphicImage getImage2() {
            return image2;
        public void setImage2(HtmlGraphicImage hgi) {
            this.image2 = hgi;
        private HtmlCommandLink linkAction3 = new HtmlCommandLink();
        public HtmlCommandLink getLinkAction3() {
            return linkAction3;
        public void setLinkAction3(HtmlCommandLink hcl) {
            this.linkAction3 = hcl;
        private HtmlGraphicImage image3 = new HtmlGraphicImage();
        public HtmlGraphicImage getImage3() {
            return image3;
        public void setImage3(HtmlGraphicImage hgi) {
            this.image3 = hgi;
        private HtmlCommandLink linkAction4 = new HtmlCommandLink();
        public HtmlCommandLink getLinkAction4() {
            return linkAction4;
        public void setLinkAction4(HtmlCommandLink hcl) {
            this.linkAction4 = hcl;
        private HtmlGraphicImage image4 = new HtmlGraphicImage();
        private HtmlOutputText outputText17 = new HtmlOutputText();
        public HtmlOutputText getOutputText17() {
            return outputText17;
        public void setOutputText17(HtmlOutputText hot) {
            this.outputText17 = hot;
        public HtmlGraphicImage getImage4() {
            return image4;
        public void setImage4(HtmlGraphicImage hgi) {
            this.image4 = hgi;
        // </editor-fold>
        public Domains() {
            // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Initialization">
            try {
                domainviewRowSet.setDataSourceName("java:comp/env/jdbc/HBird");
                domainviewRowSet.setCommand("SELECT ALL dbo.DomainView.id, dbo.DomainView.name, dbo.DomainView.description, dbo.DomainView.enabled, dbo.DomainView.created, dbo.DomainView.modified, dbo.DomainView.userCount, dbo.DomainView.groupCount  FROM dbo.DomainView");
                dataTable1Model.setDataCacheKey("com.sun.datacache.Domains.domainviewRowSet");
                dataTable1Model.setRowSet(domainviewRowSet);
                dataTable1Model.setSchemaName("");
                dataTable1Model.setTableName("");
            } catch (Exception e) {
                log("Page1 Initialization Failure", e);
                throw e instanceof javax.faces.FacesException ? (FacesException) e : new FacesException(e);
            // </editor-fold>
            // Additional user provided initialization code
    //        try {
    //            domainviewRowSet.execute();
    //            domainviewRowSet.next();
    //        } catch (Exception ex) {
    //            throw new FacesException(ex);
        protected usergroupmgt.ApplicationBean1 getApplicationBean1() {
            return (usergroupmgt.ApplicationBean1)getBean("ApplicationBean1");
        protected usergroupmgt.SessionBean1 getSessionBean1() {
            return (usergroupmgt.SessionBean1)getBean("SessionBean1");
         * Bean cleanup.
        protected void afterRenderResponse() {
            domainviewRowSet.close();
        public String groupList() {
            // User event code here...
            return "groupList";
        public String editDomain() {
            // User event code here...
            return "editDomain";
    }and the exception stack:
    Stack trace:
    com.sun.jsfcl.data.ResultSetPropertyResolver$RowData.getData(Unknown Source)
    com.sun.jsfcl.data.ResultSetPropertyResolver.getValue(Unknown Source)
    com.sun.faces.el.impl.ArraySuffix.evaluate(ArraySuffix.java:167)
    com.sun.faces.el.impl.ComplexValue.evaluate(ComplexValue.java:151)
    com.sun.faces.el.MixedELValueBinding.getValue(MixedELValueBinding.java:80)
    javax.faces.component.UIOutput.getValue(UIOutput.java:147)
    javax.faces.component.UIInput.validate(UIInput.java:639)
    javax.faces.component.UIInput.executeValidate(UIInput.java:838)
    javax.faces.component.UIInput.processValidators(UIInput.java:412)
    javax.faces.component.UIData.iterate(UIData.java:969)
    javax.faces.component.UIData.processValidators(UIData.java:781)
    javax.faces.component.UIForm.processValidators(UIForm.java:170)
    javax.faces.component.UIComponentBase.processValidators(UIComponentBase.java:904)
    javax.faces.component.UIViewRoot.processValidators(UIViewRoot.java:342)
    com.sun.faces.lifecycle.ProcessValidationsPhase.execute(ProcessValidationsPhase.java:78)
    com.sun.faces.lifecycle.LifecycleImpl.phase(LifecycleImpl.java:200)
    com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:90)
    javax.faces.webapp.FacesServlet.service(FacesServlet.java:197)
    sun.reflect.NativeMethodAccessorImpl.invoke0(NativeMethodAccessorImpl.java:-2)
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    java.lang.reflect.Method.invoke(Method.java:324)
    org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:246)
    java.security.AccessController.doPrivileged(AccessController.java:-2)
    javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
    org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:268)
    org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:162)
    org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:236)
    org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:55)
    org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:145)
    java.security.AccessController.doPrivileged(AccessController.java:-2)
    org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:141)
    org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:220)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
    org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:214)
    org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:168)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
    org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:144)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
    org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:133)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
    org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:539)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
    com.sun.enterprise.webservice.EjbWebServiceValve.invoke(EjbWebServiceValve.java:134)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
    com.sun.enterprise.security.web.SingleSignOn.invoke(SingleSignOn.java:254)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
    com.sun.enterprise.web.VirtualServerValve.invoke(VirtualServerValve.java:209)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
    org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:114)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:109)
    com.sun.enterprise.web.VirtualServerMappingValve.invoke(VirtualServerMappingValve.java:166)
    org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:107)
    org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:522)
    org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:936)
    org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:165)
    org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:683)
    org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:604)
    org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:542)
    org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:647)
    java.lang.Thread.run(Thread.java:534)Any help is appreciated.

    Hi,
    Looks like some inconsistency in the jsp source:
    in the 2nd link the url property is set. I don't think
    you need to set this.
    I couldn't tell what action you want to occur when you
    click. If you want some action to occur such as
    navigating to another page then you can use Page Navigation. Then you would need an action handler
    for the LinkAction component.
    <h:commandLink action="#{Domains.editDomain}" binding="#{Domains.linkAction2}" id="linkAction2">
    <h:graphicImage binding="#{Domains.image2}" id="image2" title="Edit" value="resources/images/edit.gif"/>
    </h:commandLink>
    <h:commandLink binding="#{Domains.linkAction3}" id="linkAction3">
    <h:graphicImage binding="#{Domains.image3}" id="image3" title="View" url="resources/images/view.gif" value="resources/images/view.gif"/>
    </h:commandLink>
    <h:commandLink binding="#{Domains.linkAction4}" id="linkAction4">
    <h:graphicImage binding="#{Domains.image4}" id="image4" title="Delete" value="resources/images/delete.gif"/>
    </h:commandLink>
    John
    JSC QA

  • Accessing cursor positions on Tek TDS3052 oscilloscope

    Hello,
    I'm trying to program a LabVIEW application using a Tektronix TDS3052 digital oscilloscope that I access via GPIB.
    I have a got most of it running using the tkds30xx driver library that came with LabVIEW. However, I am missing one function: I need to query the user cursor positions set by the user on the scope. What I'm looking for is pretty much what the "TekTDS read cursors.vi" from the vi lib for the older Tek scopes does. I didn't find its equivalent in the TDS30xx lib, and unfortunately these routines cannot be intermixed.
    Does someone know whether that function exists at all and, if yes, how to access it (where is it and what its name?)?
    Thanks in advance for your help!
    Best regards
    K
    ristian Laß

    Hello,
    For horizontal cursors try:
    CURS:HBA?
    The instrument should give a response in this format:
    Horizontal Pos1;Pos2;Delta;Selected Cursor;Units
    For Vertical try these:
    CURS:VBA:HDELT?
    Returns horizontal difference
    CURS:VBA:HPOS? x = 1 or 2
    Returns value of vertical bar ticks
    CURS:VBA:UNITS?
    Return measurement units
    CURS:VBA:VDELTA?
    Returns value difference between the bars ticks
    If you are using the IVI driver, use the write to instrument and read from instrument VIs. If you are using the LabVIEW native one, VISA write and read should do the trick. Hope this helps.

  • Java.sql.SQLException: Invalid cursor position on saving

    Dear all
    I'm having a problem with saving components on a JSF page. The page is plit in two parts:
    1. Save report details, which are being saved correctly. Here is the code
    public String btnSaveReport_action() {
            // TODO: Process the button click action. Return value is a navigation
            // case name where null will return to the same page.
            System.out.println("Saving the report ... forsi");
            int seqNumber = SequenceNumber.getNextSequenceNo("TB_REPORTS");
            getSessionBean1().setReportFK(seqNumber);
            String reportId = "REP_" + ((String)tfReportName.getText()).replace(' ', '_').trim();
            System.out.println("ReportFK in btnSaveReport: " + getSessionBean1().getReportFK());
            //SimpleDateFormat sdf = new SimpleDateFormat("dd/MM/yyyy");
            System.out.println("Start Date: " + calRepStartDate.getSelectedDate());
            //error(calRepStartDate.getValue().toString());
            //System.out.println("getvalue" + calRepStartDate.getValue());
            try {
                rk = tb_reportsDataProvider.appendRow();
                tb_reportsDataProvider.setCursorRow(rk);
                System.out.println("Setting Values ...");
                tb_reportsDataProvider.setValue("REP_PK", new Integer(seqNumber));
                tb_reportsDataProvider.setValue("REP_ID", reportId);
                tb_reportsDataProvider.setValue("REP_ACTIVE", "Y");
                tb_reportsDataProvider.setValue("REP_SESSION_FK", new Integer(getSessionBean1().getSessionId()));
                tb_reportsDataProvider.setValue("REP_NAME", (String)tfReportName.getText());
                tb_reportsDataProvider.setValue("REP_START_DATE", new java.sql.Date(calRepStartDate.getSelectedDate().getTime()));
                tb_reportsDataProvider.setValue("REP_END_DATE", new java.sql.Date(calRepEndDate.getSelectedDate().getTime()));
                System.out.println("Committing Changes ...");
                tb_reportsDataProvider.commitChanges();
                System.out.println("Refreshing Row ...");
                tb_reportsDataProvider.getCachedRowSet().refreshRow();
                getSessionBean1().getTb_reportsRowSet().refreshRow();           
    //            tb_reportsDataProvider.refresh();
    //            System.out.println("Refreshing Row ...");
    //            tb_reportsDataProvider.setCursorRow(tb_reportsDataProvider.findFirst("REP_PK",new Integer(seqNumber)));
                info("Report Data Saved Successfully!");
            } catch (SQLException sqle) {
                /* error("Cannot update report (SQLException): " +
                        reportId +
                        " : " + sqle.getMessage()); */
                log("Cannot update report (SQLException): " +
                        reportId +
                        " : " + sqle);
                info("Could not save report: " + sqle.getMessage());
                sqle.printStackTrace();
            //tfReportName.setValueBinding("sourceData", getApplication().
            //    createValueBinding("#{newReport.tb_reportsDataProvider}"));
            //tfReportName.setValueBinding("text", getApplication().createValueBinding            ("#{newReport.tb_reportsDataProvider.value['REP_NAME']}"));
            // calRepStartDate.setValueBinding("sourceData", getApplication().
            //    createValueBinding("#{newReport.tb_reportsDataProvider}"));
            //calRepStartDate.setValueBinding("selectedDate", getApplication().createValueBinding            ("#{newReport.tb_reportsDataProvider.value['REP_START_DATE']}"));
            //calRepEndDate.setValueBinding("sourceData", getApplication().
            //    createValueBinding("#{newReport.tb_reportsDataProvider}"));
            //calRepEndDate.setValueBinding("selectedDate", getApplication().createValueBinding            ("#{newReport.tb_reportsDataProvider.value['REP_END_DATE']}"));
            info("Report Name: " + tb_reportsDataProvider.getValue("REP_NAME"));
            tfReportName.validate(this.getFacesContext());
            calRepStartDate.validate(this.getFacesContext());
            calRepEndDate.validate(this.getFacesContext());
            tfReportName.setDisabled(true);
            calRepStartDate.setDisabled(true);
            calRepEndDate.setDisabled(true);
            btnNewQuery.setDisabled(false);
            btnSaveReport.setDisabled(true);
            return null;
        }The problem is that the reportFK is losing its value when I submit the page the second time! I am trying to get the value from the provider or from the rowset, but none work. Here is the code I am trying ...
    public String btnSaveQuery_action() {
            // TODO: Process the button click action. Return value is a navigation
            // case name where null will return to the same page.
            int seqNumber  = 0;
            // Save the query header details to the database  
            try {
                // Start with the query - needed for the link table
                seqNumber = SequenceNumber.getNextSequenceNo("TB_QUERY");
                String queryId = "QRY_" + ((String)tfQueryName.getText()).replace(' ', '_').trim();
                tb_queryDataProvider.setCursorRow(queryRowKey);
                tb_queryDataProvider.setValue("QRY_PK", new BigDecimal(seqNumber));
                tb_queryDataProvider.setValue("QRY_CODE", queryId);
                tb_queryDataProvider.setValue("QRY_NAME", (String)tfQueryName.getText());
                tb_queryDataProvider.setValue("QRY_ACTIVE", "Y");
                tb_queryDataProvider.setValue("QRY_SESS_FK", new BigDecimal(getSessionBean1().getSessionId()));
                System.out.println("Committing Changes ...");
                tb_queryDataProvider.commitChanges();
                System.out.println("Refreshing Row ...");
                tb_queryDataProvider.setCursorRow(tb_queryDataProvider.findFirst("QRY_PK",new Integer(seqNumber)));
                getSessionBean1().getTb_queryRowSet().refreshRow();
                info("Query Data Saved Successfully!");
            } catch (Exception ex) {
                error("Error while saving query: " + ex.getMessage());
                log("Error while saving query" + ex);
                ex.printStackTrace();
            // Now save the link
            try {
                // Start with the query - needed for the link table
                String sql = "INSERT INTO TB_LINK_REPORT_QUERY ( " +
                   "LRQ_PK, LRQ_REP_FK, LRQ_QRY_FK, " +
                   "LRQ_TYPE, LRQ_START_DATE, LRQ_END_DATE, " +
                   "LRQ_ACTIVE, LRQ_SESS_FK) " +
                   "VALUES (?,?,?,?,?,?,?,?)";
                System.out.println("Trying to do the link");
                int linkSeqNumber = SequenceNumber.getNextSequenceNo("TB_LINK_REPORT_QUERY");           
                PreparedStatement pstmt = DBConnection.getConnection().prepareStatement(sql);
                if (getSessionBean1().getReportFK() == -1 || getSessionBean1().getReportFK() == 0)
                    System.out.println("reportFK = -1 or 0!!! Trying from provider.");
                    System.out.println("Report PK is: " + getSessionBean1().getTb_reportsRowSet().getBigDecimal("REP_PK"));
                    getSessionBean1().setReportFK(((Integer)tb_reportsDataProvider.getValue("REP_PK")).intValue());
                System.out.println("Report Foreign Key: " + getSessionBean1().getReportFK());
                System.out.println("Query Foreign Key: " + seqNumber);
                pstmt.setInt(1, linkSeqNumber);
                pstmt.setInt(2, getSessionBean1().getReportFK());
                pstmt.setInt(3, seqNumber);
                pstmt.setString(4, (String)dropDownQueryType.getSelected());
                pstmt.setDate(5, new java.sql.Date(calendarQueryStartDate.getSelectedDate().getTime()));
                pstmt.setDate(6, new java.sql.Date(calendarQueryEnd.getSelectedDate().getTime()));
                pstmt.setString(7, "Y");
                pstmt.setInt(8, getSessionBean1().getSessionId());
                System.out.println("Committing Changes for Link ...");
                pstmt.executeUpdate();
                DBConnection.getConnection().commit();
                System.out.println("Refreshing Row in link ...");
                getSessionBean1().getTb_link_report_queryRowSet().setObject(
                        1, new Integer(linkSeqNumber));
                getSessionBean1().getTb_link_report_queryRowSet().setObject(
                        2, new Integer(getSessionBean1().getReportFK()));
                getSessionBean1().getTb_link_report_queryRowSet().setObject(
                        3, calendarQueryStartDate.getSelectedDate());
                getSessionBean1().getTb_link_report_queryRowSet().setObject(
                        4, calendarQueryEnd.getSelectedDate());
                tb_link_report_queryDataProvider.refresh();
                info("Link Data Saved Successfully!");
            } catch (Exception ex) {
                error("Error while saving query: " + ex.getMessage());
                log("Error while saving link: " + ex);
                ex.printStackTrace();
            return null;
        }The part saving the query with the provider is working correctly. But the part with the link is not working at all (the part with the PreparedStatement). The fact is that the PreparedStatement cannot be executed because I am getting the error at the line
    System.out.println("Report PK is: " + getSessionBean1().getTb_reportsRowSet().getBigDecimal("REP_PK"));Can anyone help please?
    Thanks and Regards
    Joseph

    guys if any of you have an idea just post it. It would be of great help for me. I can't figure out my mistake and its been 2days already and still i am stuck with my problem.
    It displays the table but there is an error "java.sql.SQLException: Invalid cursor position" so i cannot put the counter to the session.

  • Cursor positioning in table control: marking content of a field

    Hello everybody,
    I use a table-control for data input. For fast data input, my customers need dynamic positioning of the cursor. I'm using the set cursor field ... line ... statement and it works fine, except for one problem with a large text-field:
    Is it possible to set the cursor in a field plus mark all the content of the field? The behaviour, i'm looking for is that any input in the field will replace the existing content. Is there any other option?
    Thank you for any suggestions, regards, Kathrin!

    So you want dynamic cursor positioning within a table control. Take a look at FM SCROLLING_IN_TABLE and demo program DEMO_DYNPRO_TABCONT_LOOP. If this does not address your requirements the you can do it manually as follows:
    For example, your internal table has 30 rows, your table control displays 10 rows (value of sy-loopc) at one time. The value of <tabctrl>-top_line contains 11, meaning you are at the second page of table control. Your cursor is at 12th row and now on pressing ENTER, you want the cursor to be positioned at 13th row.
    In your PAI, issue the statement GET CURSOR LINE <lineno>. This will give you the current cursor position in the table control with reference to the top row currently displayed. So the value of <linno> will be 2.
    In your PBO, calculate the next line no to position your cursor into. This can be done by the formula:
      next_line = <tabctrl>-TOP_LINE + <linno> - 1.
    Then issue the statement SET CURSOR FIELD <field_name> LINE <next_line>.
    Hope this helps.
    Regards
    Message was edited by: Shehryar Khan

  • Cursor Position Discrepancies

    Hi, and first off --- thanks for reading this! 
    The issue I have encountered with AS has been mentioned by a few people on this vast land of the internet, but I have found no solution, yet.
    When a text field / textarea is set to render as HTML, I can access the cursor position of the "plain" text quite easily even if some HTML has already been inserted either by setting it through ---
         field.htmlText = . . . ;
    OR
         setTextFormat( . . . );
    However, to know exactly how many characters precede the cursor (both "plain" and hidden HTML characters), there is no setting.
    This doesn't make sense to me since AS obviously knows how many hidden HTML characters are coming before the cursor. Otherwise, the built-in formatting functions would corrupt the code.
    Of course, I could be misinterpreting it, and the built-ins just run through checking for < characters . . . this seems repetitive to me, though, and thus unlikely.
    Is there something I am missing? I have tried so many workarounds that didn't work that I'm even more impressed by the fact that I can't find one . . .

    Well, after working with it all day, I have concluded that this will not work --- in my application. Even if I could work out the final bug, it's much too expensive in computation time to be used.
    The final bug that I mentioned is getting it to recognize new lines. Currently, it interprets a new line as nothing at all. I tried getting it to backtrack the cursor position to a recognizable character, but no soap.
    I could keep trying different options, but this is becoming too expensive with my time, as well.
    I plan on taking this up with Adobe Support, and I'll post their response here for posterity.
    Anyway, thank you very much, kglad, for your help. I really appreciate it.
    For anyone who's interested, here's the solution I tried based on kglad's suggestion:
    function html_caret(plain_caret:Number, html_area:Object):Number {
           var match:String = html_area.text.charAt(plain_caret);
           var matches:Array = html_area.text.substring(0, plain_caret).split(match);
           var match_number:Number = matches.length;
           var html_length:Number = html_area.htmlText.length;
           for(var new_caret:Number = 0; new_caret < html_length; new_caret ++) {
                  if(html_area.htmlText.charAt(new_caret) == "<") {
                         while(html_area.htmlText.charAt(new_caret) != ">") {
                                new_caret ++;
                  } else if(html_area.htmlText.charAt(new_caret) == match) {
                         if(match_number > 1) {
                                match_number --;
                         } else {
                                break;
           return new_caret;

  • LV7: how to catch 'Value change' event for cursor position in XY graph?

    I try to catch an event when the cursor position of a graph's cursor
    changes. I created a reference for the cursor array and registered a dynamic
    event 'Value change' for it. The event does not fire when the cursor changes
    (either by dragging it with the mouse or by direct entry of a new value in
    the cursor's X or Y fields. In contrast, when I register e.g. the 'Mouse Up'
    event for the cursor array, the event IS detected.
    -Franz

    So this is the same behaviour as that of a regular control which also does
    not fire a 'Value changed' event when it gets updated by e.g. writing to a
    local.
    At least the cursor's behavior is consistent then...
    But unfortunately also the direct user interaction with the cursor's numeric
    field does not fire the event, which is NOT consistent.
    I was trying to catch cursor changes in my event loop and had used a 'Mouse
    Up' event of the graph indicator to look for cursor changes (whose last
    position I had kept in a local or shift reg). In order not to miss a direct
    user interaction in the numeric field I added the dynamic event 'Value
    change' to the same event case, but with no success, it missed the direct
    entry ...
    according to what you say this seems to b
    e a bug then...
    -Franz
    "Greg McKaskle" schrieb im Newsbeitrag
    news:[email protected]..
    > > I try to catch an event when the cursor position of a graph's cursor
    > > changes. I created a reference for the cursor array and registered a
    dynamic
    > > event 'Value change' for it. The event does not fire when the cursor
    changes
    > > (either by dragging it with the mouse or by direct entry of a new value
    in
    > > the cursor's X or Y fields. In contrast, when I register e.g. the 'Mouse
    Up'
    > > event for the cursor array, the event IS detected.
    > >
    >
    > The reason is that value change events fire when user action directly on
    > the control changes its value. They do not fire when other programmatic
    > value changes occur. If you are looking at a value change on the cursor
    > palette, user interaction with the numeric should fire it, but updates
    > due to cursor movement are more like programmatic updates.
    >
    > Additional events will likely be added in future
    releases, and these may
    > make it easier to catch cursor movement events on a graph.
    >
    > Greg McKaskle
    >

  • Setting the cursor position in a field in XD01 transaction

    Hi,
    I am trying to validate the field Customer type (Path : XD01 > Sales area data > Extras > Additional data) in the transaction XD01 ie: It is a mandatory entry for Customer creation.
    I tried displaying an error message which worked fine. But i want the cursor to be positioned in the Customer type field.
    Is there any possibility for this?

    Santhosh,
    I tried giving "GET CURSOR FIELD v_field LINE v_line" in the exit EXIT_SAPMF02D_001. But no values are getting captured in those variables.
    Moreover they have specified in the documentation as - "However, the variables specified during PAI processing are always initialized". Now this exit is getting called during PAI. Hence i believe that the values will be initialized! Moreover i think that getting the field & line information of the current cursor position is not going to help us!

  • Intensity Map, Cursor Position Problem ?

    Hi All
    I have an intensity map for 9x9 matrix and I display them. I am trying to come up with: A cursor moveable across the map. When it moves, it gives me the X and Y coordinates. It displayes the cell # too but I am not able to programmatically extract that using property or invoke nodes. Any suggestions ?
    Thx
    Kudos always welcome for helpful posts

    One way of doing that is to use the cursor.position property node, that returns a cluster with the X and Y values. To get the Z value, you can create a reference to the corresponding indicator in the cursor, and extract the corresponding value.
    See the attached vi.Message Edited by chilly charly on 06-29-2005 04:02 PM
    Chilly Charly    (aka CC)
             E-List Master - Kudos glutton - Press the yellow button on the left...        
    Attachments:
    Get intensity cursor values.vi ‏44 KB

  • ITunes 6.0.1.3 "forgets" last cursor position in the library

    Hi there,
    I've a minor issue with my iTunes library. When I'm comfortably browsing my library using the "Browse"-Button, switching to e.g. my CD in iTunes and after that returning to the library the last cursor position with selected title and/or album is lost. So anew I've always to navigate manually to the previous selected album which it's bit annoying especially when you've to manage a larger library.
    Any hints?
    Thanx!
    Steve
    5G 60GB (European version) Windows XP
      Windows XP  

    DEZ3124,
    I want to change the default location of the music libary, so I went through the edit | preferences | consolidate library processes...which seemed to work fine.
    This method will change the location of the iTunes Music folder but the the iTunes folder itself will be left behind in its original place: C:\Documents and Settings\user name\My Documents\My Music. This makes iTunes (and by extension will also make you) much happier and in this case you'll be well-advised to let it have its way.
    Note that all the actual music files you now have, as well as those you will add in the future(which take up the bulk of the space on your hard drive), will be in the new location. The iTunes folder will be left behind with the iTunes Library files which don't take up much space at all ... if that's a concern.

  • Invalid Cursor Position Error

    Help!
    I am using JRun3.1 and developing a web interface to a database. In this particular screen, I am using CachedRowSet (I downloaded this and added it to jrun classpath). I am getting "Invalid cursor position" error.
    I feel there is a problem with the usebean tag.
    This is my code:
    what is wrong with this?
    <%@ page language = "java" import="java.sql.*, java.util.*, javax.sql.*, sun.jdbc.rowset.*" %>
    <%
    String indSub = request.getParameter("indSub");
    String areaname = request.getParameter("selarea");
    %>
    <jsp:useBean id="crs" class="CachedRowSet" scope="session" >
    <%
    Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
    crs.setUrl("jdbc:odbc:asphData");
    crs.setCommand("SELECT siccode, sicdesc from siccode where sictitle = '" + indSub + "'");
    crs.execute();
    %>
    </jsp:useBean>
    <%@ include file="header2.htm" %>
    <link rel="stylesheet" href="http://localhost:8100/empData/almis.css" type="text/css">
    <br>
    <br>
    <table align="center">
    <tr><td class="moduleDesign" align="center">Employers Database</td></tr>
    </table>
    <br><br>
    <font size="+2" face="verdana sans-serif">
    <form action="employerDetail.jsp" method="post">
    <p><center><font color="Blue">Employers in the �<%= indSub %>� Industry
    <br>
    SIC Code:�<%= crs.getString("siccode") %>
    <br>State: Utah<br>
    Region: �<%=areaname %><br>
    </font></center></p>
    <p>
    <b>Description:</b>�<%= crs.getString("sicdesc") %>
    </p>
    </form>
    <jsp:include page="footer2.htm" />
    </body>
    </html>
    srajaman2

    Never mind!
    I have to issue a next() command to get to the first line of the resultset!
    srajaman2

  • How to get the current cursor position in word report?

    I am generating a word report. But I would like to keep the table in one page. However, I did not find the way to do it in labview. Somebody would give me some suggestions? I appreciate a lot.
    One way I think I can do is to find the current cursor position. Since I know the table size so I can figure out if the left space in the current page is enough to hold the table. But I do not know how to locate the curent cursor position in word document in labview programmatically. I appreciate any suggestions on this question.
    Thanks.

    Hi,
    when you insert data in a word document you have to refer to bookmarks rather than cursor position.
    If you are using the Report Generation Toolkit for Office it is explained in the manual chapter 3-1.
    See also the example: Generate Report From Template (Word).vi included in the toolkit.
    If you aren't using the toolkit, you still have to refer to bookmark as reference points to insert and/or fetch data.
    The principle is:
    - First create a document in which you insert bookmarks where you wish and save it as a template
    - In LV open your template document and insert in it your data referring to bookmarks as insertion points
    - At the end save your report with another name, so you still have the template
    I hope I have been clear enough, if not just as
    k!
    Good luck,
    Alberto

  • Cursor position

    I ahve a program written and all but it looks like I distorted the cursor position. I want to set the cursor position to where it can be moved by clicking and i cant figure it out. I know i have the magnify on is that why if so is there a way to keep both.
    Attachments:
    windchime2.vi ‏53 KB

    Press Here.
    Tim
    Johnson Controls
    Holland Michigan

Maybe you are looking for

  • Strange bugs in CS 5.5

    I have been noticing a few bugs in Dreamweaver CS 5.5 and would like to know if anyone else is experiencing this. I typically have a template open while editing a site so that I can quickly update changes to navigation as needed. Today, I was working

  • Regarding servlets instance and client

    Hi Suppose 5 client programs are calling one servlets at a time. Then how many instance will create 1 or 5? if 1 then how 5 requests will be be processed

  • IPhoto not saving new imports

    Suddenly when opening or trying to import photos I'm getting a new (actually my first) error message: An error occurred while trying to save your photo library. Some recent changes may be lost. Make sure your hard disk has enough space and that iPhot

  • LR not showing all images on card during Import

    I have the latest version of LR.  iMac and Canon 7D.  With my camera tethered directly to my computer, I start the Import Photos process.  When the thumbnails begin to load, it seems like if I have a large amount of photos to import (from 8GB card),

  • Education version of FB 4.7

    Does anyone know whether Adobe intends to have an education price for FB 4.7? I teach a university course that makes extensive use of FB but will not be able to do so if students must shell out $700.