Reg. Display of Output exceeds 255 characters as spool list
Dear Experts,
My requirement is that i need to display output that exceeds 255 characters in length as spool list. How should i achieve it?
Regards,
Ramesh Manoharan
Hello,
Following SAP Notes can also help you :
[https://service.sap.com/sap/support/notes/1226758|https://service.sap.com/sap/support/notes/1226758]
[https://service.sap.com/sap/support/notes/1174095|https://service.sap.com/sap/support/notes/1174095]
Wim
Similar Messages
-
XsltCollaboration code file path exceeds 255 characters
All,
I'm trying to build a Deployment Profile for a CAPS project containing an XSLT Collaboration Definition. I managed to build the Deployment Profile previously with persistence turned off. After turning on persistence (Persistence for Reporting set to 'Yes' on the only Business Process in the project) and re-building the Deployment Profile I was greeted with an Exception dialog containing the following:
com.stc.codegen.framework.model.CodeGenException: code generation error at = svcXCDXform - XCE CodeGen
XsltCollaboration code file path
C:\DOCUME~1\DAMIAN~1\LOCALS~1\Temp\builds\prjBPXformdpBPXform\svcXCDXform_ejb\xcdXform_Runtime_Handler.java
exceeds 255 characters. Shorten XsltCollaboration name or recreate Connectivity Map with shorter name to solve this problemI don't think turning persistence on has anything to do with this error but mentioned it because that was the only change I made before re-building. Can anyone shed some light on why CodeGen is building in my local temp folder and not the Path which I have set in the Enterprise Designer | Build Options? Is this a completely different path?
FYI - I am using Java CAPS 5.1.2.
Thanks,
DamianChange the Windows Environment Variables for the Temp folders to something like C:\TMP
Not sure but i've noticed that the folder specified for CODEGEN_LOCATION is ignored in older versions of JCAPS. -
UNC Pathnames that exceed 255 Characters
(I manage folders and files only in my company. Another person serves as Sys Admin. It's complicated. Don't ask.)
I seem to have encountered an issue where some users of our shared drives have created directory structures so deep, and used verbose filenames, that they have exceeded the 255 character limit.
As a result, several folders and files have lost association to any owner.
Since no owner exists, I cannot manage these folders & files properly.
I cannot take ownership of them (have tried)
I have tried mapping far deeper in the folder structure to a drive letter in the hopes that would then place these files and folders within 255 characters. (doesn't help)
In the owner column, all I see is blank. At a DOS prompt I see ...
Any suggestion on how to regain control of these files?Hello,
Now that no one is the owner of these folders, system administrator has to log on to the server and set the correct owner to enable these files to be managed.
Thanks.
Regards,
Neo Zhu -
File upload gives invalid file name if file name exceeds 255 characters
We are using SharePoint 2010. I have arround 4-5 GB data that I have to upload to document library. That data includes documents (docx, xlsx, pdf etc) with very deep folder structure and long names that can not be changed. When I trying to upload that folder
through Windows explorer or Multiple File Upload or SharePoint workspace but it is not uploading the files with long names.
I know there is a limitation of 255 Characters but is there any workarround to upload that bunch of data!
Thanks,Hi there,
Microsoft has published a hotfix for fixing length of the file limitation
http://support.microsoft.com/kb/956056/
Thank you,
Mukesh Ajmera|
LinkedIn | http://mukeshajmera.wordpress.com/|
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful" -
Issue in Display PDF OutPut with Thai characters using OracleReports9i
The Report has Cordia New font for display the Thai Charecter.I am using the Win2000 OS.
The Oracle ReportsBuilder9i shows proper Thai Character,
but when we generate to PDF file the output shows as junk in Adobe Acrobat Reader5.0
The environment variables set for this purpose are:
1.REGEDIT Change:
NLS_LANG: THAI_THAILAND.TH8TISASCII
2.UIFONT.ALI Change:
[ PDF:Subset ]
Cordia New....="CORDIA.TTF"
3.Acrobat Reader Setting:
Edit>>Preference>>General>>Display
Check all the check boxes (smooth Text, smooth Artline, smooth Images)
If anybodys knows the solution or can give a clue to sorting out this issue, it will be very helpful.
Best Regards,
Krishna Kumar.KThank you for your posting - The Member Feedback forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions cannot be answered. However we recommend that you post this thread to the "Reports" forum.
The URL is: Reports
Thanks - The OTN team -
SPOOL - how to display output list of more then 255 characters?
Hi,
First of all, I would like to say hi to all of you here, as a new member :)!
I've just discovered this forum - I'm very new and let's say unexperienced in SAP, unlike you :)!
Didn't know where to put my subject (in what folder) so I apologize in advance if I'm mistaken... I work as an ABAP programmer in SAP Core and SAP IS-T and currently I'm worried about this problem:(!
We have these huge reports in IS-T that have to be run in background, because of lot of data. Most of reports are very wide and don't fit in those 255 characters that is SAP standard for spool display. Now I'm dealing with this RFC that has to provide spool display with 800 characters, and this has to be on production by tomorrow:)!!!!!
First I created new format type (ZX_65_800) in transaction SPAD and assigned it to my local printer. I thought this would be enough, but I was wrong. Because when I try to run my programe in background, the system doesn't offer me my format at all :(!
Is there anything else I must do in order to get it.... (I work in Release 620)
If anyone had the same problem, please contact me!
Thanks,
BR,
SanjaHi All,
We have been looking for a solution for what I believe is the same problem, for more than 2 years now. I would just like to verify with you, if your requirement are similar to ours.
Problem:
1. Requirement is to run large HR reports either standard or with Ad Hoc Query in background mode in a company with more than 50,000 employees.
2. Nobody wants printed reports these days. We want to save the forests. Customers prefer to be emailed an Excel file so they can do further data analysis, filtering, pivot tables etc.
3. Reports are running OK in foreground for smaller sections of the organisation, where you send the output to Excel from ALV, or save as a local file in spreadsheet format.
4. But large reports for entire company are awkward, tie up your PCs resources, and complex reports accessing many tables can timeout before completion.
5. So scheduling these reports to run in background would be the ideal solution.
6. However when we access the report output from SP02, we find that most reports (say with more than 13 or so fields) have an output wider than 255 characters and the output of the spool file wraps to the next line in Excel. It is very tricky to then parse the data back into one row for each employee. And you have a problem if you output is for 50,000 or so employees, because then you file is 100,000 rows and will not load completely into Excel limit problem of 65,536 characters.
7. We simply want a spool file that does not wrap the data to the next line after 255 characters.
8. But how to explain this simple requirement to some technical people. It seems a lot of posts on SDN think we always want to print a spool file. NO remember the forests!
Possible Solutions:
I see a lot of posts here that refer to OSS note 186603, but they dont mention the target for the output of the spool is to import into an Excel File (i.e. spreadsheet format). Just search for 186603 or Spool request with more than 255 columns. There is also a reference to OSS note 313566. I am not sure if these will work?
I have also seen the suggestions that you need to define a customer printer format that does not wrap the output after 255 characters (create a new format type in transaction SPAD).
Did you find a solution yet to this problem, do the solutions above work, or can anyone else help us!
John McKee -
Spool List output display 255 char when the rpt is run in Background
Hi Friends,
I tried executing a program in Background.. The report output has more than 64 columns ( more than 255 char ) ..
Iam using "REUSE_ALV_GRID_DISPLAY" for displaying the list.
My Problem:
1. The spool list is truncated after 255 characters when i run in background.
2. Th output in Spool List is coming in 2 rows ... not very clear ... becoz of that the grid lines are not getting displayed.
3. I ve not used any Standard - line size for dislaying ..
4. In foreground i am able to display all the 64 columns... Y not in Background......
5. My Printer setting is ..X_255 .... only ...
Requirement:
1. What should i do to increase the spool list display to more than 255 characters
2. Or how to save the background run reports output to an excel sheet as how we 'll take the from the foreground.
Expecting your answers,
Thanks in Advance...
Cheers,
R.Kripa .........
Enjoy ABAPing ..........
new upcoming Abaper ....Hello Kripa,
You need to perform two actions.
1. set an appropriate format for the printer you are using. As explained from the previous messages you go to: SPAD -> output devives (type the printer you are using) -> from the menu ..-> goto -> device type -> formats. In there create a new format like Z_65_650
or Z_65_xxxx where xxxx could be up to 1065. This is the length of your report.
When you give your report in background, do not forget to choose the new format you created.
2. After the spool request is created, you take its number and use it ar a parameter in the following report.
Please copy and paste it in a new program, maybe called ZRSPOSHOWSPOOLLIST.
It should work then.
roxani
Display spool list > 255 columns
This is a SAP utility report to allow display of
spool request lists with line size more than 255 characters in
releases 4.6B and 4.6C (4.6D kernel must be used)
REPORT ZRSPOSHOWLIST LINE-SIZE 80.
PARAMETERS: RQIDENT LIKE TSP01-RQIDENT,
FIRSTL TYPE I DEFAULT 0,
LASTL TYPE I DEFAULT 0.
global data from LSPOXTOP
DATA: RC(10) TYPE C,
ERRMSG(100) TYPE C,
STATUS LIKE SY-SUBRC,
DSN_TYPE(8) TYPE C.
DATA: BEGIN OF DATA_SET_LINE,
DATA_LENGTH(5),
PRECOL(1),
DATA_LINE(1000),
DATA_LINE(5000), "MODAB
END OF DATA_SET_LINE,
DATA_SET_LENGTH(5) TYPE C.
TABLES: TSP01, TST05, TSPOPTIONS.
DATA: TEMSE_NAME LIKE TST01-DNAME,
TEMSE_CLIENT LIKE TST01-DCLIENT,
TEMSE_HANDLE LIKE RSTSTYPE-HANDLE,
TEMSE_PART LIKE TST01-DPART,
TEMSE_OBJTYP LIKE TST01-DTYPE,
TEMSE_RECTYP LIKE RSTSTYPE-RECTYP,
TEMSE_CHARCO LIKE TST01-DCHARCOD.
DATA: IS_OTF.
global data from LSPOCTOP
DATA: BEGIN OF SPOC
, escape
, prtctrl
, FIRST_BYTES(4) " collection of the first bytes of the
" escape sequences, which I am searching for.
, PRTCTRL_START_LENGTH TYPE I
, PRTCTRL_TOTAL_LENGTH TYPE I
, PRTCTRL_START(10)
, SYMBOL_LOW_START(10)
, SYMBOL_HGH_START(10)
, SYMBOL_START_LENGTH TYPE I
, ICON_START(10)
, ICON_START_LENGTH TYPE I
, ICON_SEL TYPE I VALUE 1
, FRAME_START(10)
, FRAME_START_LENGTH TYPE I
, END OF SPOC.
FIELD-SYMBOLS: <SPOC_PRTCTRL> TYPE C
, <SPOC_FRAME> TYPE C
, <SPOC_ICON> TYPE C
, <SPOC_SYMBOL_LOW> TYPE C
, <SPOC_SYMBOL_HGH> TYPE C
copied from RSPO_DISPLAY_ABAP_SPOOLJOB
DATA: BUFFER LIKE DATA_SET_LINE OCCURS 1000.
TABLES: TSP02L.
SELECT SINGLE * FROM TSP01 WHERE RQIDENT = RQIDENT.
IF SY-SUBRC <> 0.
WRITE: / 'Spool request does not exist:'(001), RQIDENT.
EXIT.
ENDIF.
CALL FUNCTION 'RSPO_CHECK_JOB_PERMISSION'
EXPORTING
ACCESS = 'DISP'
SPOOLREQ = TSP01
EXCEPTIONS
NO_PERMISSION = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
WRITE: / 'No authorization to display'(002).
EXIT.
ENDIF.
PERFORM READ_DATA TABLES BUFFER
USING TSP01 FIRSTL LASTL.
IF SY-SUBRC <> 0.
WRITE: / 'Error reading spoolo request'(003).
EXIT.
ENDIF.
IF IS_OTF = 'X'.
WRITE: / 'This spool request is not an ABAP list'(004).
EXIT.
ENDIF.
PERFORM DISPLAY_DATA TABLES BUFFER USING TSP01-RQPAPER TSP01-RQIDENT.
FORM GET_SPOOL_LINE.
DO.
IF TEMSE_RECTYP+1(1) = 'Y'.
CALL 'C_RSTS_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'BUFF' FIELD DATA_SET_LINE
ID 'BUFFLG' FIELD 1006
ID 'BUFFLG' FIELD 5006 "MODAB
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'SHOWLG' FIELD 'X'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ELSE.
CALL 'C_RSTS_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'BUFF' FIELD DATA_SET_LINE+1
ID 'BUFFLG' FIELD 1005
ID 'BUFFLG' FIELD 5005 "MODAB
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'SHOWLG' FIELD 'X'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
DATA_SET_LINE(5) = DATA_SET_LINE+1(5).
DATA_SET_LINE-PRECOL = ' '.
ADD 1 TO DATA_SET_LINE-DATA_LENGTH.
ENDIF.
STATUS = SY-SUBRC.
IF STATUS <> 6. " EOF, error condition, or got data
EXIT.
ENDIF.
end of this part, try to open next part
ADD 1 TO TEMSE_PART.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
AUTHORITY = 'SP01'
CLIENT = TEMSE_CLIENT "hjl
NAME = TEMSE_NAME
PART = TEMSE_PART
IMPORTING
CHARCO = TEMSE_CHARCO
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
RECTYP = TEMSE_RECTYP
SIZE =
STOTYP =
type =
OBJTYPE = TEMSE_OBJTYP
EXCEPTIONS
FB_ERROR = 1
FB_RSTS_OTHER = 2
NO_OBJECT = 3
NO_PERMISSION = 4
OTHERS = 5.
STATUS = SY-SUBRC.
ENDIF.
IF STATUS = 0.
CALL 'C_RSTS_OPEN_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'CLIENT' FIELD TEMSE_CLIENT "hjl
ID 'NAME' FIELD TEMSE_NAME
ID 'PART' FIELD TEMSE_PART
ID 'TYPE' FIELD TEMSE_OBJTYP
ID 'CONV' FIELD ' '
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'RECTYP' FIELD TEMSE_RECTYP
ID 'CHARCO' FIELD TEMSE_CHARCO
ID 'PROM' FIELD 'I'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ENDIF.
ENDDO.
IF STATUS = 4.
STATUS = 12. "EOF
ENDIF.
IF STATUS = 8.
STATUS = 40. "Line too long
ENDIF.
DATA_SET_LENGTH = DATA_SET_LINE-DATA_LENGTH.
ENDFORM.
FORM READ_DATA TABLES BUFFER
USING TSP01 LIKE TSP01 VALUE(FIRST) TYPE I
VALUE(LAST) TYPE I.
DATA: LINES TYPE I.
REFRESH BUFFER.
CLEAR IS_OTF.
TEMSE_CLIENT = TSP01-RQCLIENT.
TEMSE_NAME = TSP01-RQO1NAME.
TEMSE_PART = 1.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
AUTHORITY = 'SP01'
CLIENT = TEMSE_CLIENT
NAME = TEMSE_NAME
PART = TEMSE_PART
IMPORTING
CHARCO = TEMSE_CHARCO
CREATER =
CREDATE =
DELDATE =
MAX_CREDATE =
MAX_DELDATE =
NON_UNIQ =
NOOF_PARTS =
RECTYP = TEMSE_RECTYP
SIZE =
STOTYP =
type =
OBJTYPE = TEMSE_OBJTYP
EXCEPTIONS
FB_ERROR = 1
FB_RSTS_OTHER = 2
NO_OBJECT = 3
NO_PERMISSION = 4
OTHERS = 5.
IF SY-SUBRC = 0.
IF TEMSE_OBJTYP(3) = 'OTF'.
IS_OTF = 'X'.
ENDIF.
ELSE.
EXIT.
ENDIF.
CLEAR TEMSE_HANDLE.
CALL 'C_RSTS_OPEN_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'CLIENT' FIELD TEMSE_CLIENT "hjl
ID 'NAME' FIELD TEMSE_NAME
ID 'PART' FIELD TEMSE_PART
ID 'TYPE' FIELD TEMSE_OBJTYP
ID 'CONV' FIELD ' '
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'RECTYP' FIELD TEMSE_RECTYP
ID 'CHARCO' FIELD TEMSE_CHARCO
ID 'PROM' FIELD 'I'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
DO.
PERFORM GET_SPOOL_LINE.
IF STATUS <> 0 AND STATUS <> 40 AND STATUS <> 12.
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
IF STATUS <> 12. " 12 = End
IF NOT ( DATA_SET_LENGTH IS INITIAL ).
DATA_SET_LINE-DATA_LENGTH = DATA_SET_LENGTH - 1.
ENDIF.
ADD 1 TO LINES.
IF LINES >= FIRST.
APPEND DATA_SET_LINE TO BUFFER.
ENDIF.
IF ( NOT LAST IS INITIAL ) AND ( LINES >= LAST ).
EXIT.
ENDIF.
ELSE.
IF LINES = 0.
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
IF LINES < FIRST .
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
EXIT.
ENDIF.
ENDDO.
PERFORM CLOSE_JOB.
ENDIF.
ENDFORM.
FORM CLOSE_JOB *
FORM CLOSE_JOB.
IF STATUS <> 0 AND STATUS <> 12.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
MESSAGE E112(PO) WITH STATUS RC ERRMSG RAISING READ_ERROR.
ENDIF.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS <> 0.
MESSAGE E112(PO) WITH STATUS RC ERRMSG RAISING READ_ERROR.
ENDIF.
ENDFORM.
FORM DISPLAY_DATA TABLES BUFFER USING RQPAPER LIKE TSP01-RQPAPER
RQID LIKE TSP01-RQIDENT.
DATA: LINE_LENGTH TYPE I, GCOL TYPE I, GLINES TYPE I,
LINE_LENGTH2 LIKE RSTSTYPE-LINELENGTH,
V, V2.
CALL FUNCTION 'RSPO_SPOOLDATA_WRITE_INIT'.
PERFORM SPOOLDATA_WRITE_INIT. "MODAB
select single * from tspoptions where spoption = 'REALWIDTH'.
if sy-subrc = 0.
V = 'X'.
endif.
select single * from tspoptions where spoption = 'REALHEIGHT'.
if sy-subrc = 0.
V2 = 'X'.
endif.
IF NOT V IS INITIAL OR NOT V2 IS INITIAL.
GCOL = 0.
GLINES = 0.
SELECT SINGLE * FROM TSP02L WHERE PJIDENT = RQID
AND PJNUMMER = 0.
IF SY-SUBRC = 0.
GCOL = TSP02L-COLUMNS.
GLINES = TSP02L-LINES.
ELSE.
CALL FUNCTION 'RSPO_GET_SIZE_OF_LAYOUT'
EXPORTING
LAYOUT = RQPAPER
IMPORTING
ANSWER =
COLUMNS = GCOL
LINES = GLINES
PFORMAT =
ENDIF.
ENDIF.
IF GCOL < 80 OR V IS INITIAL.
GCOL = 255.
ENDIF.
IF GLINES < 5 OR V2 IS INITIAL.
GLINES = 0.
ENDIF.
IF GCOL >= 1024. "MODAB
GCOL = 1023.
ENDIF.
NEW-PAGE NO-HEADING NO-TITLE LINE-SIZE GCOL
LINE-COUNT GLINES. " make a wide list
SET BLANK LINES ON.
LOOP AT BUFFER.
DATA_SET_LINE = BUFFER.
IF DATA_SET_LINE-PRECOL = 'P'.
IF DATA_SET_LINE(1) = ' '. " Echter Vorschub ?"
NEW-PAGE.
ENDIF.
CONTINUE.
ENDIF.
Zeilenlange berechnen, falls unbekannt.
IF DATA_SET_LINE-DATA_LENGTH IS INITIAL.
LINE_LENGTH = STRLEN( DATA_SET_LINE-DATA_LINE ).
ELSE.
LINE_LENGTH = DATA_SET_LINE-DATA_LENGTH.
ENDIF.
IF LINE_LENGTH > 0.
LINE_LENGTH2 = LINE_LENGTH.
PERFORM SPOOLDATA_WRITE USING DATA_SET_LINE-DATA_LINE "MODAB
LINE_LENGTH2
1.
ELSE.
" Leerzeile
SKIP.
ENDIF.
ENDLOOP.
ENDFORM.
copied from RSPO_SPOOLDATA_WRITE
FORM SPOOLDATA_WRITE USING VALUE(SPOOL_DATA)
VALUE(DATA_LENGTH) LIKE RSTSTYPE-LINELENGTH
VALUE(START_POS) LIKE SY-COLNO.
function globals
DATA: LPOS LIKE SY-COLNO
, REST_LEN TYPE I
, AREA_LEN TYPE I
, NEXT_HOT TYPE I " offset of next special character
, COLS TYPE I " columns used by special character
, BYTES TYPE I " bytes used by special character
, HOT2
, HOT3
, HOT4
, HOT5
, HOT6
, HOT7
, BEGIN OF ESCAPE_TRICK
, X1(1) TYPE X
, END OF ESCAPE_TRICK
, THE_PRTCTRL(5) TYPE C
Because of a problem within the ABAP listprocessing, I shall
never output the same icon side by side with the same color
and without a gap.
As I don't know the data, I will use two different variables
alternatively.
, ICON_ID1 LIKE ICONS-L4
, ICON_ID2 LIKE ICONS-L4.
FIELD-SYMBOLS: <LDATA>
, <PLAIN_TEXT>
, <PRTCTRL>
, <HOT_PRTCTRL>
, <HOT_FRAME>
, <HOT_ICON>
, <HOT_SYMBOL>
IF START_POS < 2.
write at / ' ' no-gap.
NEW-LINE.
LPOS = 1.
ELSE.
LPOS = START_POS.
ENDIF.
REST_LEN = STRLEN( SPOOL_DATA ).
DESCRIBE FIELD SPOOL_DATA LENGTH AREA_LEN.
IF DATA_LENGTH = 0.
" fine.
ELSEIF DATA_LENGTH <= AREA_LEN.
REST_LEN = DATA_LENGTH.
ELSE.
WRITE: / 'Fehler beim Decodieren der Listendaten'(005).
STOP.
ENDIF.
CHECK REST_LEN > 0.
ASSIGN SPOOL_DATA(REST_LEN) TO <LDATA>.
WHILE <LDATA> CA SPOC-FIRST_BYTES.
NEXT_HOT = SY-FDPOS.
IF NEXT_HOT > 0.
ASSIGN <LDATA>(NEXT_HOT) TO <PLAIN_TEXT>.
MODAB
PERFORM WRITE_BIGFIELD USING <PLAIN_TEXT>
NEXT_HOT
LPOS.
WRITE AT LPOS <PLAIN_TEXT> NO-GAP.
ADD NEXT_HOT TO LPOS.
SUBTRACT NEXT_HOT FROM REST_LEN.
ASSIGN <LDATA>+NEXT_HOT(REST_LEN) TO <LDATA>.
ENDIF.
IF REST_LEN >= SPOC-PRTCTRL_START_LENGTH.
ASSIGN <LDATA>(SPOC-PRTCTRL_START_LENGTH) TO <HOT_PRTCTRL>.
ELSE.
ASSIGN 'too_short' TO <HOT_PRTCTRL>.
ENDIF.
IF REST_LEN >= SPOC-FRAME_START_LENGTH.
ASSIGN <LDATA>(SPOC-FRAME_START_LENGTH) TO <HOT_FRAME>.
ELSE.
ASSIGN 'too_short' TO <HOT_FRAME>.
ENDIF.
IF REST_LEN >= SPOC-ICON_START_LENGTH.
ASSIGN <LDATA>(SPOC-ICON_START_LENGTH) TO <HOT_ICON>.
ELSE.
ASSIGN 'too_short' TO <HOT_ICON>.
ENDIF.
IF REST_LEN >= SPOC-SYMBOL_START_LENGTH.
ASSIGN <LDATA>(SPOC-SYMBOL_START_LENGTH) TO <HOT_SYMBOL>.
ELSE.
ASSIGN 'too_short' TO <HOT_SYMBOL>.
ENDIF.
IF REST_LEN > 1.
HOT2 = <LDATA>+1(1).
IF REST_LEN > 2.
HOT3 = <LDATA>+2(1).
IF REST_LEN > 3.
HOT4 = <LDATA>+3(1).
ELSE.
HOT4 = '?'.
ENDIF.
ELSE.
HOT3 = '?'.
ENDIF.
ELSE.
HOT2 = '?'.
ENDIF.
IF <HOT_FRAME> = <SPOC_FRAME>.
COLS = 1. " in most cases.
BYTES = 2. " in most cases.
CASE HOT2.
WHEN '0'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '1'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '2'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '3'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '4'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '5'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '6'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '7'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '8'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '9'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN ':'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN ';'. " box_drawings_light_left
WRITE AT LPOS '4' AS LINE NO-GAP.
WHEN '<'. " box_drawings_light_up
WRITE AT LPOS '5' AS LINE NO-GAP.
WHEN '='. " box_drawings_light_right
WRITE AT LPOS '4' AS LINE NO-GAP.
WHEN '>'. " box_drawings_light_down
WRITE AT LPOS '5' AS LINE NO-GAP.
WHEN '?'. " drawings_checkbox_off
WRITE AT LPOS ' ' AS CHECKBOX INPUT OFF NO-GAP.
WHEN '@'. " drawings_checkbox_on
WRITE AT LPOS 'X' AS CHECKBOX INPUT OFF NO-GAP.
WHEN OTHERS.
BYTES = 0.
ENDCASE.
ENDIF.
IF <HOT_SYMBOL> = <SPOC_SYMBOL_LOW>.
ESCAPE_TRICK = HOT3.
SUBTRACT 32 FROM ESCAPE_TRICK-X1.
IF HOT4 = SPACE.
WRITE AT LPOS(2) ESCAPE_TRICK AS SYMBOL NO-GAP.
COLS = 2.
BYTES = 4.
ELSE.
WRITE AT LPOS(1) ESCAPE_TRICK AS SYMBOL NO-GAP.
BYTES = 3.
ENDIF.
ENDIF.
IF <HOT_SYMBOL> = <SPOC_SYMBOL_HGH>.
ESCAPE_TRICK = HOT3.
ADD 32 TO ESCAPE_TRICK-X1.
IF HOT4 = SPACE.
WRITE AT LPOS(2) ESCAPE_TRICK AS SYMBOL NO-GAP.
COLS = 2.
BYTES = 4.
ELSE.
WRITE AT LPOS(1) ESCAPE_TRICK AS SYMBOL NO-GAP.
BYTES = 3.
ENDIF.
ENDIF.
IF <HOT_ICON> = <SPOC_ICON>.
IF SPOC-ICON_SEL >< 1.
SPOC-ICON_SEL = 1.
ICON_ID1 = '@00@'.
ICON_ID1+1(1) = HOT3.
ICON_ID1+2(1) = HOT4.
ELSE.
SPOC-ICON_SEL = 2.
ICON_ID2 = '@00@'.
ICON_ID2+1(1) = HOT3.
ICON_ID2+2(1) = HOT4.
ENDIF.
IF REST_LEN > 4.
HOT5 = <LDATA>+4(1).
IF REST_LEN > 5.
HOT6 = <LDATA>+5(1).
IF REST_LEN > 6.
HOT7 = <LDATA>+6(1).
ELSE.
HOT7 = '?'.
ENDIF.
ELSE.
HOT6 = '?'.
ENDIF.
ELSE.
HOT5 = '?'.
ENDIF.
IF HOT5 = SPACE.
IF HOT6 = SPACE.
IF HOT7 = SPACE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(4) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(4) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 4.
BYTES = 7.
ELSE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(3) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(3) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 3.
BYTES = 6.
ENDIF.
ELSE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(2) ICON_ID1 AS ICON.
write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(2) ICON_ID2 AS ICON.
write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 2.
BYTES = 5.
ENDIF.
ELSE.
"rite at lpos(1) icon_id as icon.
WRITE AT LPOS(1) '#' NO-GAP. " Not enough space for any icon.
COLS = 1.
BYTES = 4.
ENDIF.
ENDIF.
IF <HOT_PRTCTRL> = <SPOC_PRTCTRL>.
COLS = 0. " in most cases.
BYTES = 6. " in most cases.
IF REST_LEN >= SPOC-PRTCTRL_TOTAL_LENGTH.
THE_PRTCTRL = <LDATA>+SPOC-PRTCTRL_START_LENGTH(5).
IF THE_PRTCTRL = 'SABLD'.
FORMAT INTENSIFIED ON.
"no 3.0 'SAULN'.
"no 3.0 FORMAT UNDERSCORED ON.
ELSEIF THE_PRTCTRL = 'SAOFF'.
FORMAT INTENSIFIED OFF.
"no 3.0 FORMAT UNDERSCORED OFF.
ELSEIF THE_PRTCTRL(3) = 'COL'.
CASE THE_PRTCTRL+3(1).
WHEN '0'.
FORMAT COLOR OFF.
WHEN '1'.
FORMAT COLOR 1.
WHEN '2'.
FORMAT COLOR 2.
WHEN '3'.
FORMAT COLOR 3.
WHEN '4'.
FORMAT COLOR 4.
WHEN '5'.
FORMAT COLOR 5.
WHEN '6'.
FORMAT COLOR 6.
WHEN '7'.
FORMAT COLOR 7.
ENDCASE.
CASE THE_PRTCTRL+4(1).
WHEN 'N'.
FORMAT INTENSIFIED OFF INVERSE OFF.
WHEN 'H'.
FORMAT INTENSIFIED ON INVERSE OFF.
WHEN 'V'.
FORMAT INTENSIFIED ON INVERSE ON.
ENDCASE.
ENDIF. "printcontrol
ELSE. "??
ENDIF.
ENDIF.
IF BYTES = 0.
BYTES = 1.
WRITE AT LPOS(1) '#'.
COLS = 1.
ENDIF.
ADD COLS TO LPOS.
SUBTRACT BYTES FROM REST_LEN.
IF REST_LEN > 0.
ASSIGN <LDATA>+BYTES(REST_LEN) TO <LDATA>.
ELSE.
EXIT.
ENDIF.
ENDWHILE.
MODAB
IF REST_LEN > 0.
ASSIGN <LDATA>(REST_LEN) TO <PLAIN_TEXT>.
PERFORM WRITE_BIGFIELD USING <PLAIN_TEXT>
REST_LEN
LPOS.
ENDIF.
ENDFORM.
FORM WRITE_BIGFIELD USING VALUE(FIELD) TYPE C
VALUE(LEN)
VALUE(POS).
FIELD-SYMBOLS <P>.
DATA: CHUNK TYPE I.
WHILE LEN > 0.
IF LEN > 255.
CHUNK = 255.
ELSE.
CHUNK = LEN.
ENDIF.
WRITE AT POS FIELD(CHUNK) NO-GAP.
ADD CHUNK TO POS.
LEN = LEN - CHUNK.
IF LEN > 0.
FIELD = FIELD+CHUNK.
ENDIF.
ENDWHILE.
ENDFORM.
FORM SPOOLDATA_WRITE_INIT.
DATA: BEGIN OF ESCAPE_TRICK
, X1(1) TYPE X
, END OF ESCAPE_TRICK
FIELD-SYMBOLS: <LDATA>
, <PLAIN_TEXT>
, <PRTCTRL>
ESCAPE_TRICK-X1 = '1C'.
SPOC-PRTCTRL_START = ESCAPE_TRICK.
SPOC-PRTCTRL_START_LENGTH = 1.
SPOC-PRTCTRL_TOTAL_LENGTH = SPOC-PRTCTRL_START_LENGTH + 5.
ASSIGN SPOC-PRTCTRL_START(SPOC-PRTCTRL_START_LENGTH) TO <SPOC_PRTCTRL>.
ESCAPE_TRICK-X1 = '1B'.
SPOC-FRAME_START = ESCAPE_TRICK.
SPOC-FRAME_START_LENGTH = 1.
ASSIGN SPOC-FRAME_START(SPOC-FRAME_START_LENGTH) TO <SPOC_FRAME>.
ESCAPE_TRICK-X1 = '1B'.
SPOC-ICON_START = ESCAPE_TRICK.
SPOC-ICON_START+1 = ','.
SPOC-ICON_START_LENGTH = 2.
ASSIGN SPOC-ICON_START(SPOC-ICON_START_LENGTH) TO <SPOC_ICON>.
ESCAPE_TRICK-X1 = '1B'.
SPOC-SYMBOL_LOW_START = ESCAPE_TRICK.
SPOC-SYMBOL_LOW_START+1 = '('.
SPOC-SYMBOL_HGH_START = ESCAPE_TRICK.
SPOC-SYMBOL_HGH_START+1 = ')'.
SPOC-SYMBOL_START_LENGTH = 2.
ASSIGN SPOC-SYMBOL_LOW_START(SPOC-SYMBOL_START_LENGTH)
TO <SPOC_SYMBOL_LOW>.
ASSIGN SPOC-SYMBOL_HGH_START(SPOC-SYMBOL_START_LENGTH)
TO <SPOC_SYMBOL_HGH>.
SPOC-FIRST_BYTES+0(1) = SPOC-PRTCTRL_START(1).
SPOC-FIRST_BYTES+1(1) = SPOC-FRAME_START(1).
SPOC-FIRST_BYTES+2(1) = SPOC-ICON_START(1).
SPOC-FIRST_BYTES+3(1) = SPOC-SYMBOL_LOW_START(1).
ENDFORM. -
Spool output more than 255 characters
Hi ,
i am running a ALV report in background whose output is more than 255 characters . but spool is showing only 255 charcters.
Do we have any setting to change to display all characters.
Or any OSS notes that can be applied.
Thanks & regards,
Sonika AhujaHi,
You need to change the Format Type through SPAD transaction. The Format Type decides the number of rows and columns per page. By creating a new format type as per your requirement would solve the probelm.
Also, in the Report declaration, change the Line-Size to 300 or as per the width of your output.
For further details pls. refer this thread :
Re: Spool List output display > 255 char when the rpt is run in Background
Best regards,
Prashant -
Spool list output truncated after 255 char
Hi,
I'm using ALV list(FM: Reuse_alv_list_display) in my report. When it is run in background, the output is sent to spool. The problem is the list is truncated after 255 characters.
Is there any way to display more than 255 characters in spool? So that it can be downloaded to a spreadsheet from spool.
ThanksHi,
in the report-statement you can define the line-size of your list. I expect, you haven set the line-size!
Try this one:
REPORT Zxxxxx line-size 300.
Normaly the program searches the the layout that fits to your selected printer (done by FM 'RSPO_LIST_LAYOUT_FITS').
Regards,
Martin -
Need Spool file 255 characters for background HR Reports into Excel
We have been looking for a solution for problem this for more than 2 years now.
Problem:
1. Requirement is to run large HR reports either standard or with Ad Hoc Query in background mode in a company with more than 50,000 employees.
2. Nobody wants printed reports these days. We want to save the forests. Customers prefer to be emailed an Excel file so they can do further data analysis, filtering, pivot tables etc.
3. Reports are running OK in foreground for smaller sections of the organisation, where you send the output to Excel from ALV, or save as a local file in spreadsheet format.
4. But large reports for entire company are awkward, tie up your PCs resources, and complex reports accessing many tables can timeout before completion.
5. So scheduling these reports to run in background would be the ideal solution.
6. However when we access the report output from SP02, we find that most reports (say with more than 13 or so fields) have an output wider than 255 characters and the output of the spool file wraps to the next line in Excel. It is very tricky to then parse the data back into one row for each employee. And you have a problem if you output is for 50,000 or so employees, because then you file is 100,000 rows and will not load completely into Excel limit problem of 65,536 characters.
7. We simply want a spool file that does not wrap the data to the next line after 255 characters.
8. But how to explain this simple requirement to some technical people. It seems a lot of posts on SDN think we always want to print a spool file. NO remember the forests!
Possible Solutions:
I see a lot of posts here that refer to OSS note 186603, but they dont mention the target for the output of the spool is to import into an Excel File (i.e. spreadsheet format). Just search for 186603 or Spool request with more than 255 columns. There is also a reference to OSS note 313566. I am not sure if these will work?
I have also seen the suggestions that you need to define a customer printer format that does not wrap the output after 255 characters (create a new format type in transaction SPAD).
Can anyone help us!
John McKeeHi,
Can you please check whether you can use:
CONSTANTS C_LF TYPE X VALUE '0A'.
CONSTANTS C_CR TYPE X VALUE '0D'.
Regards,
Lakshmi. -
How to display more than 255 characters in the report
Hi all,
In my program, i try to output a variable type c length 500 in the report. But this report still keep on display 255 characters only although i had set the line-size to 500.
Is there any method output all characters?
thanks,
JaniceHi Janice Yeoh,
I am assuming this is classical report......And just need to do is increase the line-size in report statement. Find below for small example which i ve tried..
REPORT ytest1 LINE-SIZE 500.
DATA : BEGIN OF it OCCURS 500,
v TYPE c,
END OF it.
DO 503 TIMES.
IF sy-index = 500.
WRITE '500'.
ELSE.
WRITE : 'X' NO-GAP.
ENDIF.
ENDDO.
Dont forgot to Reward me points .....All the very best....
Regards,
Sreenivasa sarma K. -
ABAP Programming to display more than 255 characters in the screen
Hi
I want to display more than 255 characters in the screen after executing a report but i cant able to do that.
Please help me to find out the solution.
Thanks
Mrutyunjaya TrpathyHai tripathy,
when the output of a report contains columns extending more than 255 characters in length. In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output. The report output can contain upto 90 columns in the display with the wide array of display options.
The commonly used ALV functions used for this purpose are;
1.REUSE_ALV_VARIANT_DEFAULT_GET
2.REUSE_ALV_VARIANT_F4
3.REUSE_ALV_VARIANT_EXISTENCE
4.REUSE_ALV_EVENTS_GET
5.REUSE_ALV_COMMENTARY_WRITE
6.REUSE_ALV_FIELDCATALOG_MERGE
7.REUSE_ALV_LIST_DISPLAY
8.REUSE_ALV_GRID_DISPLAY
9.REUSE_ALV_POPUP_TO_SELECT
hope u can try in this way.
REGARDS,
PRABA. -
SQ01 Output fields having more than 255 characters
Hello,
I need to show query output more than 255 charaters but system is not allowing
Here is the Error message:
List is wider than 255 characters (generation not possible)
I used SQ01 as t-code to create query.
How can i show my output more than 255 characters
ThanksRefer SAP Note 857823, ALV grid cannot display more than 128 characters per field and will truncate all the characters beyond if it's an ABAP program
From my experience it will not display the field at all in SQ01.
You need to write an abap program and split the field into two fields of length 128 and display side by side.
Work around: If you cannot write abap program uncheck (no display in query) that field in SQ02 and generate it. Execute your query and copy the key field use se16n to input in the key fields and use import to excel sheet function to get the required data. -
Problem printing more than 255 characters in report output and in the spool
Hi Guys,
I am trying to print one file in the report output and in the spool but it's priting till 255 characters only. If I try the samething while writing in application server and in peresentation server it is printing full content. I am giving the line size in the REPORT statement as more than 255 like 300 but even it is not printing. How can i print the full contents. Whether it is any basis related issue or in any settings can we do that. please advice.
Thanks in advance.If it is not showing in Spool, Basis people has to do some setting in SPAD Transaction.
-
Display more than 255 characters in SAP 4.6c version.
Hi
Can anyone tell me how to display more than 255 characters in the spool log of sap or the application server?
Thanks in advance.
GeetaHi,
You have to have some patch.Pls refer to SAP oss notes 626010.
Pls reward if useful.
Sushil.
Maybe you are looking for
-
I am able to import clips into idvd that have been declared shared in imovie. I am able to create a menu and have multiple video clips on the screen. The clips even play fine (with audio) when previewed. However once I burn to a dvd-R and play back o
-
How can i delete all the duplicates in iTunes library?,
have three copies of each song showing in the library. i am sure there is an easy solution. what is it?
-
Take photo from image stream using capture engine technique in media foundation
Hi, I am beginner for media foundation.I have to develop Win32 desktop application using capture engine technique in media foundation. I have to implement the following features:1)Show video streaming 2)Capture video 3)Capture photo from still-image
-
Is there any way I can have secondary click activated by two fingered tap on trackpad AND by clicking the bottom right of the trackpad? I have a Macbook, Late 2008
-
Hey, I am about to launch a new website, I have a mobil and a tablet version to it. the website works, but the mobil and the tablet sides have bugs. on the ipad it is good, as well as on surface RT, but the other versions for other tablets like Kindl