Reg displaying Invoice as PDF on Webdynpro for ABAP

Hi All,
I have to display Invoice as PDF. I'm trying to see the output of the smart-form being used through Transaction VF03 and then using that through Transaction zfacinv checked the output. But, my problem is that I'm unable to check which Smartform is being used therein.
Please guide me to find the name of the Smartform being used.
Thanks!
Kumar Sauarv.

Check the following link:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0de1eb8-0b98-2910-7996-8a3c2fcf6785?quicklink=index&overridelayout=true

Similar Messages

Uploading PDF into webdynpro for ABAP

Hello,
I have a small Webdynpro for ABAP with an Interactive Form. I can fill my fields in this form. Now I downloaded the PDF to my local drive, changed the fields and tried to upload it again. Thats where my problem is:
I cant upload my changes. I used a File_upload UI Element which is binded to a attribute FORM.FILE type xstring. This attribut I binded to the Interactive_Form element field pdfsources. I implemented a button with an action for my server roundtrip.
I thought thats it but unfortunetly not. Can anybody tell me what I am missing.
Thanks in advance.
regards
stefan

Hi Stefan
Web Dynpro ABAP development recommends that you create a <a href="http://service.sap.com/message">customer message</a> on component BC-WD-ABA.
Best regards,
Markus Meisl

Display invoice print (PDF) in sales order(Credit/Debit note) attachement for Validator

Hello Expert,
I would like to know if is there any possibility to display invoice print (PDF) in sales order (Credit/Debit note) as attachment.
Issue: Customer raise the credit note with the reference of invoice, sometimes user don't explain the reason for credit and don't attach any reference document in sales order(credit request).
Customer requirement: Customer want to display reference invoice print (PDF)in sales order(Credit request) for validator so validator can cross check with invoice and validate the credit note.
Could you suggest the best solution?
I am thinking to give mandatory text box (Text determination)at sales order(Credit request)
Vipin

Hi,
You can enable Document Management System (DMS)
Please refer below links for details:
http://scn.sap.com/thread/459101
http://scn.sap.com/thread/2096563

Offline Interactive PDF Forms Using EMail with WebDynpro for ABAP

These is a tutorial on implementing Offline Interactive PDF Forms using Email to both send out and receive the form back using WebDynpro for Java.
Is it possible to implement the same using WebDynpro for ABAP, specifically receiving the forms via email server.
Regards,
Mark

Hi Mark,
Check this out :
https://www.sdn.sap.com/irj/sdn/interactiveforms-elearning
Go to section :
Send, Receive, and Process Interactive Forms via Email in SAP NetWeaver Application Server ABAP (RIG session 4A)
and for the ABAP WebDynpro :
SAP Interactive Forms by Adobe in Web Dynpro for ABAP (Session 3A) .
I managed to make it work in my internal sytem.
Goodluck.
Cheers,
Danny

Display HTML code in WebDynpro for ABAP

Hi, I would like to display a html page in a WebDynpro View, ie: I have the html code in a "string" variable and would now display this string now not with the html tags visible, but as a "real" html page.
I found a thread in WebDynpro for ABAP but I am a little bit lost in converting the logic to ABAP world.
Thanks

>I found a thread in WebDynpro for ABAP but I am a little bit lost in converting the logic to ABAP world.
I'm a little bit confused by this statement. Do you mean you found a thread in Web Dynpro Java, perhaps?
Regardless the approach is possible using the iFrame UI. The warning about the iFrame is that it is deprecated in NetWeaver 7.0 and 7.01 and my not be usable depending upon your support package level. However in NetWeaver 7.02 the iFrame returns to fully supported status.
If you have the HTML content in a string, you can simply place it into the ICM cache. This will provide a temporary URL for the content (you supply the lifetime of the URL) that can be referenced via the iFrame URL or even the LinkToURL if you want to open in a new window.
Here is the code for placing the string into the ICM Cache:
****Create the cached response object that we will insert our content into
data: cached_response type ref to if_http_response.
create object cached_response
    type
      cl_http_response
    exporting
      add_c_msg        = 1.
try. " ignore, if compression can not be switched on
      call method cached_response->set_compression
        exporting
          options = cached_response->co_compress_based_on_mime_type
        exceptions
          others = 1.
    catch cx_root.
endtry.
****set the data and the headers
data: l_app_type type string.
      cached_response->set_cdata( lv_html_text ).
      l_app_type = 'text/html'.
cached_response->set_header_field( name = if_http_header_fields=>content_type
                                     value = l_app_type ).
cached_response->set_status( code = 200 reason = 'OK' ).
cached_response->server_cache_expire_rel( expires_rel = 60 ).
data: guid type guid_32.
call function 'GUID_CREATE'
    importing
      ev_guid_32 = guid.
concatenate '/sap/public' '/' guid '.' 'html' into lv_iframe_url.
****Cache the URL
cl_http_server=>server_cache_upload( url      = lv_iframe_url
                                       response = cached_response ).
wd_context->get_element( )->set_attribute(
    name = `IFRAME_URL`
    value = lv_iframe_url ).

WebDynpro for ABAP Vs Java

Hi all,
I have recently started learning Web Dynpro for ABAP.
I have worked in WebDynpro for Java.
1)I wanted to understand pros and cons of WebDynpro for ABAP and Java.
2)What are the functionality that are available in Web Dynpro for Java but not in Web Dynpro for ABAP.
3)What should be preferred when considering performance issues - WD for ABAP of Java?
Any Web Log or Link in this context will be helpful.
Thanks a lot,
Rashmi

Hi,
OOPs ABAP uses Classes and Interfaces which uses Methods and events.
If you have Java skills it is advantage for you.
There are Local classes as well as Global Classes.
Local classes we can work in SE38 straight away.
But mostly it is better to use the Global classes.
Global Classes or Interfaces are to be created in SE24.
SAP already given some predefined classes and Interfaces.
This OOPS concepts very useful for writing BADI's also.
So first create a class in SE 24.
Define attributes, Methods for that class.
Define parameters for that Method.
You can define event handlers also to handle the messages.
After creation in each method write the code.
Methods are similar to ABAP PERFORM -FORM statements.
After the creation of CLass and methods come to SE38 and create the program.
In the program create a object type ref to that class and with the help of that Object call the methods of that Class and display the data.
see the links below, Understand them and start developing.
chk out the links below:
General Tutorial for OOPS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
Have a look at these links for OO ABAP.
http://www.sapgenie.com/abap/OO/
http://help.sap.com/saphelp_nw04/helpdata/en/c3/225b5654f411d194a60000e8353423/content.htm
http://www.esnips.com/doc/375fff1b-5a62-444d-8ec1-55508c308b17/prefinalppt.ppt
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/5c65b0dd-eddf-4512-8e32-ecd26735f0f2/prefinalppt.ppt
http://www.allsaplinks.com/
http://www.sapgenie.com/abap/controls/index.htm
http://www.esnips.com/doc/2c76dc57-e74a-4539-a20e-29383317e804/OO-abap.pdf
http://www.esnips.com/doc/0ef39d4b-586a-4637-abbb-e4f69d2d9307/SAP-CONTROLS-WORKSHOP.pdf
http://help.sap.com/saphelp_erp2005/helpdata/en/ce/b518b6513611d194a50000e8353423/frameset.htm
SDN Series:
https://www.sdn.sap.com/irj/sdn/developerareas/abap?rid=/webcontent/uuid/35eaef9c-0b01-0010-dd8b-e3b0f9ed7ccb [original link is broken]
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCABA/BCABA.pdf
Basic concepts of OOPS
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b6cae890-0201-0010-ef8b-f970a9c41d47
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1591ec90-0201-0010-3ba8-cdcd500b17cf
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
http://www.henrikfrank.dk/abapuk.html
http://www.erpgenie.com/abap/OO/
OOPS in ABAP
oops consept in abap
ABAP with OOPS
http://www.abap4.it/download/ALV.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e8a1d690-0201-0010-b7ad-d9719a415907
http://www.erpgenie.com/abap/controls/alvgrid.htm
OOPS with ABAP
https://www.sdn.sap.com/irj/sdn/wiki?path=/pages/viewpage.action&pageid=37566
/people/rich.heilman2/blog/2005/07/27/dynamic-internal-tables-and-structures--abap
http://www.sapgenie.com/abap/OO/
Regards
Srinivas.K
Message was edited by:
Armin Reichert

Interactive Forms by WebDynpro for ABAP

Hello,
I'd like to create Adobe Interactive Forms by "WebDynpro for ABAP".
Our business requirements are
- to download offline PDF forms.
- to upload PDF forms and display Forms online.
Please let me know how to do this and the document or blogs.
Best regards,
Koji

Hi,
Downloading a form is as simple as when u enduser opens a form online, he just saves a copy of it, fills it up and uploading is just the next step.
If u want to upload an offline PDF form:
Here's the link that'll give a fair idea about this:
/people/shruti.rathour/blog/2008/02/07/uploading-sap-interactive-form-on-the-abap-webdynpro-view
If still not clear ask me..
It's just that u've created a view in webdynpro ABAP and uploading an offline form from that.
regards
Amita

What is used for WebDynpro for ABAP?

hi all friends,,
what is used for WebDynpro for ABAP?
Thanks,
S.Suresh.
Title was edited by:
        Alvaro Tejada Galindo

Hi
Web Dynpro for ABAP - Getting Started
Web Dynpro for ABAP is SAPs new standard UI technology for developing user interfaces in the ABAP environment. In the long term Web Dynpro for ABAP will be the successor of the traditional screen (Dynpro) based user interface technology which is based on the SAP GUI. Available with NetWeaver 7.0 (2004s) Web Dynpro for ABAP provides the same declarative UI development paradigm as Web Dynpro for Java directly out of the NetWeaver ABAP Application Server. Web Dynpro for ABAP allows the development of user interfaces directly within the ABAP Workbench (SE80) and the Web Dynpro runtime environment is a central part of the ABAP server and can be used in any SAP solution based on NetWeaver 7.0 (2004s) without the need of an additional server installation.
Web Dynpro for ABAP allows the development of user interfaces in a declarative way by providing a mighty framework which abstracts the rendering technology from the core UI definition tasks. The Web Dynpro developer declares the layout and behavior of the UI without caring about HTML, JavaScript, browser specifics or the HTTP protocol. Instead the focus lies on designing graphically Web Dynpro components based on the Model View Controller model, which enforces a clear separation between the UI layer and the underlying business logic.
This declarative Web Dynpro programming model enforces the developer to focus on the tasks of
Designing the layout of the visible views (where should the table be placed, do I need tabs, how should the button look?)
Declaring the flow and behavior of the application (flow between views, which event is triggered by which button click, etc)
Defining the data binding (which internal table is displayed in a specific table, etc)
Implementing the event handlers and controller methods.
Without making any assumption about the used rendering technology, like which browser should be supported or if the Web Dynpro application will be later displayed in a web browser via HTML at all or in another kind of client with completely different rendering capabilities.
The Web Dynpro Frameworks provides all important UI features directly out of the box:
All elements (tables, buttons, trees, dropdown list boxes, etc) necessary for state of the art user interfaces are provided by the Web Dynpro Framework in the form of predefined UI element libraries.
Complex features and behavior of UI elements.
Internationalization of the UI. All visible strings in a Web Dynpro ABAP UI are handled by the translation system and are translated in the same translation environment like other ABAP language dependent resources. All texts are displayed automatically at runtime, dependent of the users credentials.
Accessibility features are directly built into the framework and UI elements.
A unified rendering engine generates at runtime the data which is sent to the specific client application, which is not limited to browsers but includes the NetWeaver Business Client.
All this is available in the established environment of the ABAP application server and well known capabilities like the transportation and change management system, security environment, test and performance analysis tools or remote debugging can be used like in common ABAP development.
Learn about the Web Dynpro for ABAP technology with the resources below, and post your related questions and answers to the Web Dynpro forum.
Web Dynpro for ABAP: Sneak Preview
Download, License Key Documentation, and Installation Guide available here.
Web Dynpro for ABAP: Tutorials for Beginners
SAP NetWeaver Product Management provides this set of tutorials for getting started with Web Dynpro for ABAP technology.
SAP Help Portal: Web Dynpro for ABAP
This online SAP documentation goes into detail about Web Dynpro architecture and programming, Web Dynpro for ABAP administration and security, and more.
Web Dynpro - Not Just for Java Developers Anymore   (PDF 3.8 MB)
In this SAP Insider article, SAP Product Manager Karl Kessler describes the tools of Web Dynpro for ABAP and uses a simple flight report example to highlight new and updated tools in the familiar ABAP environment.
Community Contribution: WDA Tutorial I - Getting Started with Web Dynpro for ABAP   (PDF 2.5 MB)
Software Engineer Rich Heilman provides this step-by-step guide for developing a Web Dynpro for ABAP application.
Going into Details
Basic Concepts - Selection vs. LeadSelection
In this blog, Thomas Szuecs of the Web Dynpro for ABAP development team shows how selection and LeadSelection works in Web Dynpro for ABAP.
Web Dynpro for ABAP: Recreate the SE16 Data Browser   (PDF 386 KB)
In this tutorial, Thomas Jung of SAP NetWeaver Product Management shows how to create a data browser simulator using Web Dynpro for ABAP.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/80aef577-543f-2a10-d19c-d83a565efe37 [original link is broken]
<b><REMOVED BY MODERATOR></b>
Message was edited by:
        Alvaro Tejada Galindo

Follow-up webdynpro for abap using portal theme nw2004s, sp12

Hello,
I wanted to get a follow up to this thread,
Re: webdynpro for abap using portal theme nw2004s, sp12
We are having a problem with the way reports developed in Web Dynpro for ABAP displayed in the portal (the pop-ups and dropdowns look out of wack). The issue appears when we wrap the reports into portal themes (either standard or custom). As per the thread (the link for which I posted above), the suggestion was to apply WDFORCEEXTERNALSTYLESHEET parameter to the WDP, however our system doesn't have this parameter in the system, but it seems like I can create my own parameter. Can some on give me all of the properties assigned to WDFORCEEXTERNALSTYLESHEET in table WDY_APP_PROP_DEF.
Thank you

Hi Brad, I was trying to apply the note 1033496 but our ABAP servers does not have the WDFORCEEXTERNALSTYLESHEET parameter available in WDY_APP_PROP_DEF table. All other notes are not applicable to our issue.
The portal is NW2004s SP12, the ABAP server is NW2004 SP11
Regards.
Message was edited by:
Aleks Ozerov

Article: Screen Conversion in WebDynpro for ABAP

Hi all,
       I want to share with you my first article that i posted in SDN. Looking for your valuable comments...
Click the below link to read by article. Thanks.
<a href="http://sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/screen%20conversion%20in%20web%20dynpro%20abap.pdf">Screen Conversion in WebDynpro for ABAP</a>
Some of the links in the article are not accessable from the article. The links are given below.
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/a282c952-0801-0010-1eb5-87953e036712">Getting Started with Web Dynpro for ABAP</a>
<a href="http://help.sap.com/saphelp_erp2005/helpdata/en/30/f2156a26fb4b4d86c5b0ce9f86bfb3/content.htm">Wizard</a>
[url=http://help.sap.com/saphelp_erp2005/helpdata/en/73/e5e6418b7eca17e10000000a155106/content.htm]Restrictions[/url]

HI Hema,
What i understood from u r query is u want 2 refrsh all ui elements data.
u can read data from the respective nodes and clear those data.
Example: I want to delete contents of an ui element on the screen( FULL_NAME ).
create a buuton REFRESH on the screen and assicn a action to that button.u wil get a method with that action.write this follwing code in tat method.
method ONACTIONREFRESH_UI .
    DATA lo_nd_processedby TYPE REF TO if_wd_context_node.
    DATA lo_el_processedby TYPE REF TO if_wd_context_element.
    DATA ls_processedby TYPE wd_this->element_processedby.
    DATA lv_full_name LIKE ls_processedby-full_name.
navigate from <CONTEXT> to <PROCESSEDBY> via lead selection
    lo_nd_processedby = wd_context->get_child_node( name = wd_this->wdctx_processedby ).
get element via lead selection
    lo_el_processedby = lo_nd_processedby->get_element( ).
get single attribute
    lo_el_processedby->get_attribute(
      EXPORTING
        name = `FULL_NAME`
      IMPORTING
        value = lv_full_name ).
clear lv_full_name.
CALL METHOD lo_el_processedby->set_attribute
EXPORTING
    value = lv_full_name
    name   = `FULL_NAME`
endmethod.
reward if it is use ful

Creating attachment in Webdynpro for ABAP

Hi Expertrs,
I am new to webdynpro for ABAP. I have a requirement like I need to create an attachment in webdynpro screen. I have searched the forums and I got the class CL_GOS_SRV_ATTACHMENT_CREATE and method EXECUTE_ITS. but when I call this method I am getting dump in the method.
Can anybody please suggest me how to create attachment in webdynpro for ABAP?
When ever attachment is created and clicks on save button workflow will be triggered and a workitem appears portal when ever the user click on the display attachment I need to display the created attachemnt.
Please suggest me.
Thank You.
Ranganadh

Hi,
Please follow the steps below;
Follow these steps;
1.create a node 'FILEUPLOAD' with 2 attributes
a) FILECONTENT type XSTRING
b) FILENAME type STRING
2. Create a fileuplaod uielement
a) bind the data property with attribute 'FILECONTENT'
b) bind the filename property with attribute 'FILENAME'
3. Create a button 'UPLOAD'
a) create the action method for this button
Paste the following code in this method
Data l_node type ref to if_wd_context_node.
Data l_stru type wd_this->elements_cn_fileupload.
l_node = wd_context->get_child_node( 'FILEUPLOAD' ).
l_node->get_static_attributes( importing static_attributes = l_stru ).
"save l_stru-fielcontent in database. Your file will be saved in the database in XSTRING format.
Now when you want to display this file;
1. Create a Node 'FILEDOWNLOAD' with 1 attribute
a) FILE type XSTRING
2. Create a filedownload uielement
a) bind the data property with the attribute 'FILE'
Fetch the file from databased and set the File attribute of teh filedownload uielemnt to display the file.
Hope this helps!
Radhika.

How can we Access RFC of R/3 in WEBDYNPRO FOR ABAP?

Hi all,
i wnat to access a Function Module(RFC) which has created in R/3 in WEBDYNPRO FOR ABAP.Can i access it through SERVICE CALL.or if any other process there.?And how can i map their context & how can i execute?
Edited by: ravi k on Mar 27, 2008 1:07 PM

Hi,
you can find a [pdf document|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9cb5d345-0801-0010-6a8e-fc57c23fd600] here.
grtz,
Koen

Need to create a Calender in WebDynpro for ABAP

Hi,
Tcode SSC1 displays owner's calender. I need to create same calender in WebDynpro for ABAP. I couldn't find any standard component usage for the same. Is there any component usage for the same or is there any altenative to create the same?
It's quite urgent.
Thanks,
Mahesh

Hi
You have to use DateNavigator Control to get the left hand side screen in SCC1 and
for the right hand side one you have to work with table Control
for Date Navigator UI control see WDR_TEST_EVENTS
and to get the right hand side screen see WDR_TEST_TABLE see the view SingleMarkableCell.
Using both these standard components you can achieve this.
Abhi

In webdynpro for ABAP alv table issue

hello gurus,
                  i am new for webdynpro for ABAP.i strucked at one point at designing time.anybody could you suggest me on this.
thanks in advance.
let me explain my scenario first.
in my webdynpro for ABAP developement i have one alv table having ten fields.i am featching the data for eight fields from one Ztabale and updating , for rest of two fields we need to fill after displaying output using the respective F4 help. Right now these two fields are in input editable mode.now i am getting the values successfully from F4 help and at the same time it is allowing MANUAL ENTRIES also but as per my requirement it should not allow any manual entries . for this i have made these two fields are in readonly mode as like as rest of fields to avoid the MANUAL ENTRIES but at this time i didnot get any F4 helpfor those two fields.
so how can i achive my goal in this thing could any one suggest me.
my final conclusion is we need to get only F4 help values into those two fields . it should not allow any manual values at any point of time.
best regards,
babu

ya hi harshit,
      my self also used same code in my action part . here i have one table with four fields carrid , connid , fldate , price.
for carrid i have created freely programmed search help.but if it is in display mode there is no F4 help in enable mode.
in context for attribute carrid
DATA lo_nd_flight TYPE REF TO if_wd_context_node.
DATA lo_el_flight TYPE REF TO if_wd_context_element.
DATA ls_flight TYPE wd_this->element_flight.
DATA lt_flight TYPE wd_this->elements_flight.
navigate from <CONTEXT> to <FLIGHT> via lead selection
lo_nd_flight = wd_context->get_child_node( name = wd_this->wdctx_flight ).
select connid fldate price from sflight into CORRESPONDING FIELDS OF TABLE
    lt_flight UP TO 20 ROWS.
@TODO handle non existant child
IF lo_nd_flight IS INITIAL.
ENDIF.
get element via lead selection
lo_el_flight = lo_nd_flight->get_element( ).
alternative access via index
lo_el_flight = lo_nd_flight->get_element( index = 1 ).
@TODO handle not set lead selection
IF lo_el_flight IS INITIAL.
ENDIF.
get all declared attributes
lo_el_flight->get_static_attributes(
   IMPORTING
     static_attributes = ls_flight ).
CALL METHOD lo_nd_flight->bind_table
EXPORTING
    new_items            = lt_flight
   set_initial_elements = ABAP_TRUE
   index                =
DATA: lo_cmp_usage TYPE REF TO if_wd_component_usage.
DATA: lo_interfacecontroller TYPE REF TO iwci_salv_wd_table.
    instantiate ALV component usage if necessary
lo_cmp_usage = wd_this->wd_cpuse_alv( ).
IF lo_cmp_usage->has_active_component( ) IS INITIAL.
    lo_cmp_usage->create_component( ).
ENDIF.
    pass reference to data node to instance of ALV usage
lo_interfacecontroller = wd_this->wd_cpifc_alv( ).
lo_interfacecontroller->set_data( r_node_data = lo_nd_flight ).
Configure ALV
DATA lr_config TYPE REF TO cl_salv_wd_config_table.
lr_config = lo_interfacecontroller->get_model( ).
**declerations
DATA: lt_columns TYPE salv_wd_t_column_ref,
        ls_columns TYPE salv_wd_s_column_ref,
        lr_input TYPE REF TO cl_salv_wd_uie_input_field,
        name TYPE string,
        lt_node_info TYPE wdr_context_attr_info_map,
        ls_node_info TYPE wdr_context_attribute_info,
        lv_tabix TYPE sy-tabix,
        lr_info TYPE REF TO if_wd_context_node_info.
TYPES: BEGIN OF ty_name,
          name TYPE string,
         END OF ty_name.
DATA: lt_name TYPE TABLE OF ty_name,
        ls_name TYPE ty_name.
**for getting node info
*Get the context node information
lr_info = lo_nd_flight->get_node_info( ).
lt_node_info = lr_info->get_attributes( ).
LOOP AT lt_node_info INTO ls_node_info.
    CASE ls_node_info-name.
      WHEN 'CARRID'.
        ls_name-name = ls_node_info-name.
        APPEND ls_name TO lt_name.
     WHEN 'REGIONALOFFICER'.
       ls_name-name = ls_node_info-name.
       APPEND ls_name TO lt_name.
     WHEN 'INSPECTORNAME'.
       ls_name-name = ls_node_info-name.
       APPEND ls_name TO lt_name.
    ENDCASE.
ENDLOOP.
*Logic for Table Horizontal Scrolling
lr_config->if_salv_wd_table_settings~set_visible_row_count( 13 ).
" lr_config->if_salv_wd_table_settings~set_width( '1085' ).
lr_config->if_salv_wd_table_settings~set_width( '100%' ).
lr_config->if_salv_wd_table_settings~set_scrollable_col_count( 8 ).
" lr_config->if_salv_wd_table_settings~set_fixed_table_layout( abap_true ).
lr_config->if_salv_wd_table_settings~set_first_visible_scroll_col( 'CARRID' ).
lr_config->if_salv_wd_table_settings~set_cell_action_event_enabled( abap_true ).
Set the table editable .
DATA: lr_table_settings TYPE REF TO if_salv_wd_table_settings.
lr_table_settings ?= lr_config.
lr_table_settings->set_read_only( abap_false ).
lr_table_settings->set_read_only( abap_true ).
DATA: lr_column_settings TYPE REF TO if_salv_wd_column_settings,
        lr_column TYPE REF TO cl_salv_wd_column.
DATA: lt_string TYPE STANDARD TABLE OF string,
        ld_string TYPE string,
        ld_int TYPE i,
        lv_index TYPE i.
Make few columns editable and attach inputfield, if permitted.
    DATA lr_input_field TYPE REF TO cl_salv_wd_uie_input_field.
    CLEAR lt_string.
    APPEND 'CARRID' TO lt_string.
    LOOP AT lt_string INTO ld_string.
      lr_column_settings ?= lr_config.
      lr_column = lr_column_settings->get_column( ld_string ).
      CREATE OBJECT lr_input_field
        EXPORTING
          value_fieldname = ld_string.
      lr_input_field->set_read_only( abap_true ).
      lr_column->set_cell_editor( lr_input_field ).
    ENDLOOP.
    CLEAR lt_string.

How to send a mail in webdynpro for abap

Hi experts,
Am working on webdynpro for abap. My requirement is to send a mail to end-user, he 'l fill that form and send it to me back. once I received that mail I 've to convert that pdf into xml and 've to parse that xml file and pass those values to bapi (everything in webdynpro). how can i proceed, its urgent to me. I dont want exact answer jst some inputs to proceed will help to me thank you.

I think it's easier to accomplish with workflow.
You can send workitems and receive them. Search sap help for functionality on offline approval, you can use a lot of the functionality of that one.
Regard, Rob Dielemans

Reg displaying Invoice as PDF on Webdynpro for ABAP

Similar Messages

Maybe you are looking for