Reg: Distribution of Work

Hi experts
I would like to distribute the quantity mentioned in my internal activity. I have tried that SAP020 in "Diskeycapreqlt".
when i run cn48n it is not showing the distributed quantity.
pl let me know how to distribute the quantity day wise/month wise and where i can see the result as planned value for the concerned period.
Thanks & regards
pavan

Dear amresh
I have given my Internal activity Qty is 1000 M3, but i want it to be distributed over project. Say monthly distribution. Means my planned quantity will be 300 m3 for december,200 m3 for january etc. like that.
I want to see the report for a particular month say december, my planned qty is 300m3 and actual is
270m3, rather than 1000 m3 is my planned, i would like to see 300m3.
In CN48n remaining work should be 30m3  rather than 730m3.
I'm trying with distribution key concept. but no result yet.
hope you got the clarity now.
pl help me
regards
pavan

Similar Messages

  • Adaptiva Software Distribution not working with Cisco APs in Local Mode

    A worldwide customer would like to use a new Software distribution system called Adaptiva to replace SCCM within Windows environment. As far as I understand, Adaptiva is designed to work like a snowball system. A single PC at a remote side can be "infected" with new Software and will distribute the package to other PCs within the same IP-subnet, saving WAN bandwidth.
    First tests are showing that it is working well with Cisco WLAN solution as long as we are using Flexconnect WLAN APs.
    Customer locations with Local WLAN AP design create problems for this new software distribution method.
    The WLAN-PCs can be reached from outside, but the establishment of the Client/Server-model between the WLAN Clients is not working. The Port used by this software for communication between clients in each WLAN subnet is UDP Port 34329.
    Our WLCs are running at  7.4.130.0. The problem is appearing independently of AP Multicast settings or Broadcast Forwarding.  Enabling Broadcast forwarding without Reboot did not improve the situation.
    Global Multicast Mode and IGMP Snooping are also of no influence.
    P2P Blocking Action is "Disabled" within the WLAN setup.
    Who has any idea what might cause this communication problem between WLAN clients in Local Mode of APs ?
    Thank You for answers
    Wini

    I can think of two solutions. You could 1: turn the "auto-lock" to never, so that your phone never sleeps. Or, you could 2: jailbreak your iPhone and install "insomnia". I wish we had the Cisco Mobile app. I usually use wifi/insomnia and turn data off at work since we have wireless pretty much everywhere...
    Sent from Cisco Technical Support iPad App

  • Distribution not working.

    I have setup, I think correctly ZFS. I'm trying to do my first
    distribution. I doesn;t seem to be working. How do you diagnose whats
    going wrong. I know this is a broad question, but I'm not sure where to
    look.

    Write down your setup and look how things are connected and scheduled.
    Distrubutor-Channel-Subscribor.
    Then look if there is any distribution in the channel. Right click on the
    distributor and do a refresh.
    Set the messaging level for the log-file to 6 in the properties of the
    distributor. In the workingdirectory of the distributor there is a file
    called ted.log.
    Some common error message's our files show ;-) are:
    Scheduled to collect .... at Run never
    Distribution not in any channel
    Gather .... stopped with unknown error.
    Hope this is something to help.
    Erik
    > I have setup, I think correctly ZFS. I'm trying to do my first
    > distribution. I doesn;t seem to be working. How do you diagnose whats
    > going wrong. I know this is a broad question, but I'm not sure where to
    > look.

  • Reg:Distribution model is currently being processed

    Dear all,
    When  i am distributing my model view in BD64  i am getting following error.
    Error:
    Model view VCR3BW has not been updated
    Distribution model is currently being processed 
    Thanks,
    Sankar M

    Hi shankar,
    i think already one distribution model is running.
    First delete that model view and create new one as per your requirement.
    then it will work.
    Regards,
    Sakthivel.VT

  • Should Distribution Groups work in Review Activities?

    In System Center Service Manager 2012 R2, should I be able to set a group as the Reviewer for a Review Activity (as part of a Change Request/Template)?
    It seems that when we do this in my organization, members of the distribution group do not receive an email notification, nor can they approve activities because their names do not appear individually with the option to Approve or Reject the activity.
    There may be some documentation to explain this, if anyone could point me in the right direction it would be much appreciated!

    Hi,
    Yuriy pointed to our blog post however we developed the idea and created a new
    email connector solution that supports the scenario when a user (a member of email-enabled AD security or distribution group) can vote on the behalf of the group. It works without creating a new reviewer.
    BTW the connector can do much more than the Exchange connector.
    Cheers,
    Marat
    Site: www.scutils.com  Twitter:
    LinkedIn:
    Graveyard:

  • Reg code not working

    I purchased QT recently and the registration code they gave on my invoice doesn't work. Do I need to download QT again? How do I get QT Pro to work for me now?
    please cc reply to [email protected]
    thanks!

    jees.. the caps
    would have been:
    Edit>>Preferences>>Quicktime Preferences>>Register (Tab)
    enter your info there, make sure you enter your name exactly as it is on your reg info or it won't work with your reg code.
    organization is optional so you can put any random stuff in there or even leave it blank
    hope that helps!

  • VPP and B2B apps distribution not working

    Hi,  as anyone been successful in setting up the Profile Manager to distribute a B2B app?
    We have the app in our VPP account, it shows up in the front page, no problem. Then we "buy" (it's a free app) some copies of it, in the account summary licences are shown as "Managed Licences", but they never show up in the App panel of the Profile Manager.
    Digging the issue down we discovered that OS X Server reports in devicemgrd.log, after the purchase
    1:: [158] [2013/12/17 10:52:27.787] Requesting incremental VPP sync in response to push notification from server
    and that's very good, but then
    :: [158] [2013/12/17 10:52:30.700] Unable to retrieve any metadata for product ID 743681***
    The ID is the one of the B2B app we asked the developers to put in our VPP account for purchase.
    I also have to say that
    - "Standard" apps distribution (apps that are public in the Store) is working fine (free and paid apps)
    - It seems to me that there is no way to escalate this issue to Apple tech support? (any suggestion on this point?)
    So, in the end, it would be a great relief just to know that anyone has the B2B method of app distribution working on his OS X Server Mavericks, because I'm banging my head on this issue for a month or more, and I'm starting to feel delusional ...  Thank you for any hint!

    No way. I opened a support case with Apple for this, and after a 10 days investigation they admitted it's their fault, but no timeframe for a solution was given to me.
    Pretty much disappointing I have to say.
    ps
    will update thread when (hopefully) it will be solved for me. Would you do the same pls?
    Regards

  • Xcode ad hoc distribution not working

    I am running Xcode Version 4.6.1 (4H512)
    I use ad hoc distribution to push my ipa and plist files, I have done this many times before....
    It doesn't work now.
    Has the process changed?
    VERY frustrating

    post your question on the developer forums at http://devforums.apple.com

  • Distribution of work over duration

    Dear All,
    In my present set up, when i distribute the work over the duration of the activity, the distribution is linear.
    Ex- 50 m3 of excavation in 5 days will get distributed as 10 m3 daily for 5 days.
    How can I make the distribution variable ( S-curve, or sinusoidal etc)???
    Regards,
    VikasDev

    Hi Vikas,
    To use a custom distribution key you need to make configure the following:
    Navigate to the following node in SPRO:
    Project System > Resources > Distribution
    1. Distribution function - tcode OPB2
    The following data is for a S curve distribution. you can use MS excel to distribute % Req values according to the curve equation you want.
    % Dur     % Req
    10            2
    20            5
    30            12
    40            27
    50            50
    60            70
    70            83
    80            92
    90            97
    100            100
    2. Use the distribution strategy that you want to use, normally the standard SAP strategies suffice almost all requirements.
    3. Create a new Requirements Distribution key
    Use the Startegy decided in number 2 and function from number 1.
    You are ready with your S curve distribution key.
    Let me know if this helped.
    jibat
    Edited by: Jibat Sankar De Sarkar on Jan 24, 2009 12:14 PM

  • Reg: Control Frame Works material...

    Hi All,
             Can Any one of you please send me some info in detail regarding <b>Control Frame Works</b> in ABAP.I need to work on this area.I dont know the concepts of OBJECTS in ABAP point of  view ,i need some help in working out the topic practically.
    Thanks in Advance,
    Regards,
    Vijay Penumaka

    refer sap help.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/147a36c
    http://help.sap.com/saphelp_nw2004s/helpdata/en/d2/147a36c70d2354e10000009b38f839/content.htm

  • Cost distribution not working for -Ve Transactions

    Hi,
    We are spliting the cost for an misc transaction. The Splitted cost are got cost distributed. But the Reversal expenditure (-ve Transaction) is not get cost distributed.
    The cost distribute flag is enabled for the reversal transaction. but no credit or debit account populated. Please let me know what might be the issue.
    Thanks In advance
    Thanks
    Raj

    Check the cost distribution concurrent request's output. It will tell you the reason. It might be an auto-accounting issue too. Post the error code here.
    Sathish Raju
    www.projectsaccounting.com

  • Ad Hoc distribution not working

    I am trying Ad Hoc distribution for the first time. I generated the Ad Hoc mobile provision profile with the user's UDID. I built the app as Apple describes. I sent the provision file and the zipp'ed app to someone running Windows XP.
    They dragged the provision file into iTunes and that seemed to install (when they did it a second time it said it was already installed). When they dragged the .app directory into iTunes, the cursor changed to a Plus sign as they dropped it there. However it was not then visible in the Applications part of the library. When dragging it into iTunes a second time, it **did not** indicate it was already installed.
    Any idea what the problem could be? If somehow their UDID didn't match the one in the provision file (or the one in the app), would it give this behavior?

    I had this problem when doing ad-hoc on Windows before. I created a compressed copy of the application using the compress feature in Finder. Unfortunately, when that ZIP file is extracted on Windows, you get both a .app folder and a .app file in the extracted directory. Not sure what's in the extra file (Finder resources, maybe?) but it is a little confusing.
    I solved the problem by writing a script that uses the command-line zip command to create an .ipa file, which is properly-interpreted by Windows and Mac OS iTunes. I don't think the structure of the .ipa file is documented anywhere, but it's just a ZIP archive with a "Payload" folder containing your .app bundle. If you want to see what one looks like, just run "unzip" on an IPA from your iTunes library.
    Oh, and I suggest that you personally try out your install instructions on a Windows machine before sending a build out to a tester, if you can. I use Parallels to do my Windows-based testing, but there are lots of other options.

  • Reg:  Travell management work flow scenarios

    HI Experts,
    Please can any send some documents or links related to SAP HR travel management.
    Workflow.
    I am going to work on the travel management implementation project.
    So please send me some scenario or documents or links.
    Thanks & Regards
    Sameera
    Thank in advance.
    You will get reward points

    Hi,
    You may refer to below mention link for Workflow Scenarios in Travel Management
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/d5/202038541ec006e10000009b38f8cf/frameset.htm
    The workflow included in the Travel Management application component supports the approval procedures for:
    Travel planning
    Travel request
    Reimbursement of expenses after a business trip
    Sincerely,
    Devang Nandha
    "Together, Transform Business Process by leveraging Information Technology to Grow and Excel in Business".

  • Reg. Job work and Stock of WIP account in OBYC

    Dear Experts
    In our development system,when I create Process order ( with E & L combination) the following accounts
    is created
    221402 Stock of WIP
    504031 GR/IR Clg-Job work
    315001 Inc/Dec in WIP
    412103 Jobwork Charges
    but I have configured in our IDES system, that shows only two accounts GR/IR Clg-Job work & Inc/Dec in WIP.
    What is the configuration missed in OBYC. Pls help me.
    Thanks
    Rajakumar.K

    Hi
    First which chart of accounts do you want create transaction event keys.
    Then decide the transaction event key and posting rule. Then assign the g/l accounts.
    I feel you might have created for other chart of accounts.
    Regards,
    Raman

  • Wireless Distribution not Working

    Attempting to deploy an Enterprise application wirelessly, with partial success. I do have the Enterprise Developers Kit, I've created the provisioning profile, added the devices ID's, uploaded the mobile provisioning profile, the ipa, and the P-list.
    When I install the app through xCode directly onto the iPad, then attempt to download it wirelessly, it works fine. When I attempt to use it on a device that hasn't had that direct install, it downloads about 66%-75% of the way, right when the title shows up on the app, then says "Unable to Download Application".
    Any ideas?

    It's off a GoDaddy linux server, but actually I solved my own problem. It was due to not updating the iPad's OS to 5.1.1. I updated it and it installed just fine. My bad.

Maybe you are looking for