Reg.Documentation for ECC 6.00

Dear Experts
We are going to 4.7 to ECC 6, we want documents and MM configuration guide. And also upgrading AFS. I have no idea. Any one help me.
Thanks
Rajkumar.K

Hi,
Refer following link for MM Scenario (BPP, Configuration, etc...)
[SAP Best Practices Baseline Package India V1.603|http://help.sap.com/bp_bl603/BL_IN/html/scope/Scoping_offline.htm?display=STE-BL_IN_V1603+ENTRY_LEVEL_MANUFACTURING.xml]
Here Click on P2P i.e. Procure to Pay and then select the sub components (Scenarios).

Similar Messages

ABAP Keyword Documentation for ECC 6.0

Hello,
Can somebody point out the link to the ABAP Keyword Documentation for ECC 6.0?
Thanks in advance.
Regards,
Reena

Hi,
Look into this URL:
http://www.geocities.com/academic37/abap/abapindx.htm
Rgds,
Ramani N

Cross Application Time Sheet (CATS) - Documentation for ECC 6.0

Hello everybody,
i'm searching for new documentation for customizing of Cross Application Time Sheet (CATS) for
SAP ECC 6.0.
I found on
http://help.sap.com/saphelp_nw04/helpdata/en/64/3fff9a470211d189720000e8322d00/frameset.htm
support SAP link.
I have also Cross Application Time Sheet (CATS) pdf documentation but for SAP R/3 4.6c release.
Can somebody suggest me where to find "how to" pdf documentation for ECC 6.0 release?
Thanks
Jerry

Hi,
you can refer to books by SAP press... Configuration CATS
and can log on to Service.sap.com
Regards,
Kapil Kaushal

IPC API Documentation for ECC 6.0

Where can I find the documentation for IPC on ECC 6.0 version. Your help is highly appreciated.

Hi,
Look into this URL:
http://www.geocities.com/academic37/abap/abapindx.htm
Rgds,
Ramani N

Real Estate Documentation For ECC 6 Required

Gurus,
If anyone could extend help in providing documentation for Real Estate Documentation complimented with Business Scenarios.
Thanks

Hello Kaptain SAP,
Please share the document if u got any.
Thanks
Fahad

Reg, Documentation for a New Implementation using ASAP Methodology

Hello,
Will you pl, help me in getting complete documentation (Std / Template)for all stages of ASAP methodology, for a new module. If you provide at least URL, it will be of great help.

Hi Rao,
The ASAP Methodology has five phases:
1. Project Preparation project formally initiated and planning well under way.
2. Business Blueprint project team gathers requirements and conducts conceptual design of the solution.
3. Realization system solution is built and integration tested, end users trained
4. Final Preparation final check before cut over to new system solution
5. Go Live & Support solution confirmation, on-going support in place and project closing
http://media.sdn.sap.com/html/submitted_docs/Implementation_Roadmap_XI/index.htm
https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000420636&_SCENARIO=01100035870000000202
http://www.misa.bc.ca/docs/pdfs%2FMISA%20NEWS/Making%20ERP%20Work%20for%20Small%20Government.pdf
Hope this helps...
Best Regards,
DMK
*Assign points if it serves your purpose...

Scaling in rebates as for ECC 6.0

Experts can you please tell how to make use of scaling functionality added in rebates for ECC 6.0 version,
Pls tell by example how to apply scaling in rebates,from VBo1 to reflection of scaling in sales orders,practically not theoretically,
how to group conditions in rebates while scaling,
Pls tell step vise by example??
I need your help.

HI,
In se38 ..give ur program name.
In menu Goto --> Documentation --> Change.
and press save.
Thanx
bgan.

Data Transfer Tool for ECC 6.0

Hi All,
Good Morning. I would like to know if anybody has had the opportunity to use this tool in ECC 6.0. If so, where did you obtain the software related to this tool?
Please Advise.
Kind Regards,
Daniel A. La Mendola

I am actually looking for where the program resides and if it exists for ECC 6.0. I have found tons of documentation, but nothing on how to obtain the tool itself.
If anybody can assist me in the endeavor it would be greatly appreciated.
Thanks again for you help

Enhancement Pack 2 for ESS for ECC 6.0

Can anyone provide me with document on the new functionality of Enhancement Pack 2 impact on ESS for ECC 6.0?
Or where I can find this documentation?
What areas of ESS & MSS does it cover?
Thanks
WB

Thanks Chris
Still confused.
Are you able to tell me what is the latest enhancement pack for ESS, the reason for asking is that I'm looking for more details on the new iViews as contained in Note 1048386 see below
Thanks
WB
In the previous ESS Business Package (BP) version, the links for starting processes were provided in the workset Life and Work Events. With EhP2, the links for starting the processes are provided in the workset that the process belongs to thematically (for example, the process 'Change of Working Time' is provided in the workset 'Working Time'). The following list provides an overview over the processes available in the standard system and the worksets they are assigned to.
Benefits and Payment
o Company Loans
o Membership Fees Sports Club
o Status Overview
Working Time
o Change of Working Time
o Status Overview
Own Data
o Change of Address
o Personnel File
o Status Overview
Life and Work Events
o Maternity Leave
o Birth of a Child
o Termination
o Status Overview
The available processes are integrated in the navigation of the ESS Homepage Framework.

Unicode Compatability is a pre requisite for ECC 6.0

Hi all,
Can any body send me any link or any document which says tht Unicode Compatability is a pre requisite for ECC 6.0. its really urgent.
Regrads,
Ruchika saini

Hi
see this
The Link will be helpful to you.
Re: Upgrade 4.6 to ECC - What are the responsibilites
regarding Unicode influence in Standard programs
Very good document:
http://www.doag.org/pub/docs/sig/sap/2004-03/Buhlinger_Maxi_Version.pdf
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d37d1ad9-0b01-0010-ed9f-bc3222312dd8
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/589d18d9-0b01-0010-ac8a-8a22852061a2
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f8e316d9-0b01-0010-8e95-829a58c1511a
You need to use the transaction UCCHECK.
The report documentation is here
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Display Modified SAP Programs Also
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
- Call transaction SAMT
- Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
Regards
Anji

Kernel Upgrade for ECC 6

Hi all,
I want to upgrade the kernel patch level for ECC 6.
I download all files in http://www.service.sap.com/patches
path: Entry by application group -> Additional Components -> SAP Kernel ->SAP Kernel 32 bit Unicode -> SAP KERNEL 7.00 32-BIT UNICODE -> Windows Server on IA32 32bit -> Database independent
Then, I extract all, stop SAP server and copy all these files to \SYS\exe\uc\ and restart server. But, on SAPMMC the dispatcher remains yellow "Dispatcher - Running but Dialog Queue info unavailable".
The old kernel patch level is 75, and I extract the file SAPEXE_102-20000972.SAR (patch level 102), but when checking system status, I found that the kernel patch level is not updated.
Do you know this problem ? Do I miss some steps ?
Thank you very much,
Sylvecast
null

MMC connects to the underlying sapstartsrv.exe windows service. Beside starting up and shutting down the processes listed in the start profile, this service will also connect to shared memory segments to find out the status of work processes and the dispatcher.
When starting the system it will normaly first execute sapcpe.exe to replicate new executables from the central replication directory (DIR_CT_RUN) to the instance executable directory (DIR_EXECUTABLE).
If you provide a new kernel version to DIR_CT_RUN, it will copy and start a new disp+work.exe and sapstartsrv.exe to the local directory WHILE the old sapstartsrv.exe service executable is still running.
if the new disp+work.exe contains changes to shared memory structures (compared to the old one) the old sapstartsrv.exe will not be able to read them. Dispatcher - Running but Dialog Queue info unavailable is one result of it, unavailable work process information another one.
sapstartsrv.exe will detect that there is a new version of it's executable by comparing sapstartsrv.exe against sapstartsrv.exe.new (which have the same timestamp in DIR_CT_RUN) and will restart the service with the new executable after 5 minutes which will normaly. This automatically fixes the problem and is documented in windows application log (eventviewer).
Peter

How to set reg.cgi for VideoPhoneLabs

i start with stratus .i try set it to work with my dedicated apache server and sql but have no clue how to do it or where to put this file on my server.
i realy have probleme with reg.cgi
for now i did www/cgi-bin/reg.cgi and in the xml i set my websiteurl = "http://88..../cgi-bin/"
also how to complete reg.cgi for have it to talk with my db ?
here the reg.cgi file.
help please ...
#! /usr/bin/python --
reg.cgi by Michael Thornburgh.
This file is in the public domain.
IMPORTANT: This script is for illustrative purposes only. It does
not have user authentication or other access control measures that
a real production service would have.
This script should be placed in the cgi-bin location according to
your web server installation. The database is an SQLite3 database.
Edit the location of the database in variable "dbFile".
Create it with the following schema:
.schema
CREATE TABLE registrations (
 m_username VARCHAR COLLATE NOCASE,
 m_identity VARCHAR,
 m_updatetime DATETIME,
 PRIMARY KEY (m_username)
CREATE INDEX registrations_updatetime ON registrations (m_updatetime ASC);
# CHANGE THIS
dbFile = '.../registrations.db'
import cgi
import sqlite3
import xml.sax.saxutils
query = cgi.parse()
db = sqlite3.connect(dbFile)
user = query.get('username', [None])[0]
identity = query.get('identity', [None])[0]
friends = query.get('friends', [])
print 'Content-type: text/plain\n\n<?xml version="1.0" encoding="utf-8"?>\n<result>'
if user:
 try:
 c = db.cursor()
 c.execute("insert or replace into registrations values (?, ?, datetime('now'))", (user, identity))
 print '\t<update>true</update>'
 except:
 print '\t<update>false</update>'
for f in friends:
 print "\t<friend>\n\t\t<user>%s</user>" % (xml.sax.saxutils.escape(f), )
 c = db.cursor()
 c.execute("select m_username, m_identity from registrations where m_username = ? and m_updatetime > datetime('now', '-1 hour')", (f, ))
 for result in c.fetchall():
 eachIdent = result[1]
 if not eachIdent:
 eachIdent = ""
 print "\t\t<identity>%s</identity>" % (xml.sax.saxutils.escape(eachIdent), )
 if f != result[0]:
 print "\t\t<registered>%s</registered>" % (xml.sax.saxutils.escape(result[0]), )
 print "\t</friend>"
db.commit()
print "</result>"

Persistent binding is effectively provided by STMS (MPxIO) - is there anything in particular you're wanting to do that STMS doesn't provide?

Transfer rules are not exist for ECC Quality source system in BI Dev

Hi,
I Connected BI Dev system To ECC Dev and installed the sales, purchasing,... data flow, but here i am not getting the quality data to show the reports, to get Quality data I established the connection between BI Dev and ECC QA, while installing the transfer rules for the ECC QA data sources there no transfer rules are exist(only some of them exist) in the business content, but all the update rules,... are exist, when i right on the data source say create transfer rules it is proposing App praposal.
When i select source system as ECC dev while installing the transfer rules i can see all the transfer rules, but when i select source system as ECC QA i can see only some transfer rules.
only problem with transfer rules(some of them exist), for remaining all objects are properly existing in business content for ECC QA source system.
Regards,
chandra

Hi Fayzrakhmanov
Thanks for the quick reply. We are not moving the stuff to QA. We are only connecting QA ECC system to BI Dev. We already have datasources moved to ECC QA and created source system for ECC QA in BI Dev.
The problem is I am not able to get Business Content transful rule for new source system. We I can find some but not all unlike development.
Help on this would be appreciated.
Thanks

Enter a business location for ECC 6 EHP 5 (Taiwan)

Hi,
While releasing the billing doc to accounting we are getting the error Enter a business location
Message no. F5A192
We are working on ECC6 EHP 5 and this requirement is for Taiwan.
I have found the SAP Note; 376018, however this is valid for 4.6c ONLY.
Could you please check and advise is this note is valid for ECC 6 as well. Or do we need to apply any other notes.
Or any other suggestions.
Thanks & Regards,
Student.

Hi,
Please check the below thread.
Error Enter a Business Location for Korea
Regards,
P Gomatheeswaran

Replication Issue for ECC BP to CRM BP

Hello Experts,
I am trying to Create a BP in ECC with transaction BP, but whenever i save the BP in ECC, the BDOC gets stuck in CRM with the error message that 'Grouping CUBP does not exist',
Everything was working fine before, but recently we had created a copy of Account Group 001 for ECC customer for a Z accoutn group, we made all the required settings in ECC in transaction PIDE and then ran the inital load 'DNL_CUST_KTOKD' the new account group did come over to CRM in table CRMC_T077D and the account group is working fine, the customers created in ECC are getting replicated to CRM, but now the BP created in ECC does not gets replicated to CRM and give the above stated error message in the BDOC.
PLEASE HELP!!

Hello Shoaib ,
In the CRM as well as ECC system in the customising SPRO :
Cross-Application Components   >SAP Business Partner
Business Partner   >Basic Settings
Number Ranges and Groupings   > Define Groups and Assign Numbers Ranges
    > CUBP Grouping could be missing in any one of the systems. Could you please check this.
Thanks & regards,
Krishnen

Reg.Documentation for ECC 6.00

Similar Messages

Maybe you are looking for