Reg: Dynamic Selections
Hi Friends,
I have a basic question. What is the use of dynamic selections in LDB?
Thanks in advance.
Regards,
nathan.
Nathan,
SELECTION-SCREEN DYNAMIC SELECTIONS FOR NODE|TABLE <node>.
If the node <node> is requested by the user of the logical databases, the dynamic selections are included in the selection screen. A user can then choose Dynamic selections to enter extra selections for the corresponding fields. If you call the logical database using the function module LDB_PROCESS, you can pass a corresponding parameter. You can use these selections in dynamic statements in the logical database program to read data. The values of the program-specific selection criteria that you defined for a node for which dynamic selections were available are also passed to the logical database. The user can also define the fields for dynamic selections as a selection view for the logical database.
The selection screen of a logical database is part of the standard selection screen (number 1000) of the executable program to which the logical database is attached. It has a standardized layout - the selection criteria and parameters appear on separate lines in the order in which they were declared. You can change the layout using the SELECTION-SCREEN statement.
The runtime environment generates the selection screen with number 1000 for every program in which the attributes do not contain a different selection screen version. You can prevent certain input fields from the selection screen of a logical database from appearing on the selection screen by defining selection screen versions with a screen number lower than 1000 in the selection include, and entering this version number in the program attributes. By pressing F4 there, you can get an overview of the selection screen versions defined in the logical database concerned. To define a selection screen version, use the statements SELECTION-SCREEN BEGIN|END OF VERSION. Within these statements you can use SELECTION-SCREEN EXCLUDE to specify fields that you do not want to appear on the selection screen.
If the attributes of an executable program contain the number of a selection screen version, the version is used in the standard selection screen. Although the input fields that you excluded from the selection screen are not displayed, the corresponding selections still exist, and you can still edit them in the program or by calling the function module LDB_PROCESS.
Pls. Mark if useful
Similar Messages
-
Reg Dynamic Selections in Logical DataBases
Hi All,
I am forcefully scheduling a report to run in background mode even though the users run it online.
While doing so I have handled all the parameters and the select options in the selection screen in the following way.
SELECT OPTIONS
wa_rspar-selname = 'BUDAT'.
wa_rspar-kind = 'S'.
if BUDAT[] is not initial.
loop at BUDAT.
wa_rspar-sign = BUDAT-sign.
wa_rspar-option = BUDAT-option.
wa_rspar-low = BUDAT-low.
wa_rspar-high = BUDAT-high.
append wa_rspar to rspar.
endloop.
else.
wa_rspar-low = BUDAT.
append wa_rspar to rspar.
endif.
clear: wa_rspar.
PARAMETERS.
wa_rspar-selname = 'SORTART'.
wa_rspar-kind = 'P'.
wa_rspar-low = SORTART.
append wa_rspar to rspar.
clear: wa_rspar.
While doing so since the report uses logical database-the dynamic selection portion has to be handled otherwise the dynamic selection is ignored and the report is displayed wrong.
How can we handle the dynamic selection portion for the forceful conversion of the program to background mode even if it is run online.
Has anyone faced this kind of issue.If so how was it resolved.
Thanks in advance.Finally it seems not to be possible to fill the dynamic selection of a logical database during INITIALIZATION in a report which is using the respective logical database (under report properties).
My solution was to create a new select option within the customer program which refers to the respective database column (... FOR bsis-gjahr). If this column is supported by the dynamic selections of the logical database, then the values entered on the selection screen are automatically transferred and used by the logical database selection. It is just important to refer to the correct table, as BSIS-gjahr is working while BSEG-gjahr and BKPF-gjahr are not working in my example.
See the following link:
http://help.sap.com/saphelp_470/helpdata/en/9f/dba73935c111d1829f0000e829fbfe/content.htm?frameset=/de/9f/dba76035c111d1829f0000e829fbfe/frameset.htm¤t_toc=/de/d3/2e974d35c511d1829f0000e829fbfe/plain.htm&node_id=305 -
Dear All,
In the report fbl3n,there is no field called "entry date" in the dynamic selections tab. Is it possible to add this field to the dynamic selections tab. Kindly advice me in this regard.
Regards,
P.Krishna Chiatanya.In Top you see Blogs and Articles link, you will see useful documents.
For forums visit:
http://www.sdn.sap.com/irj/scn/forums
For wiki visit:
http://www.sdn.sap.com/irj/scn/wiki
For blogs visit:
http://www.sdn.sap.com/irj/scn/weblogs
For Articles visit:
http://www.sdn.sap.com/irj/scn/articles-topic -
Adding of new field in dynamic selection for financial statements
Hi ALL,
I want to add Trading partner in dynamic selection fields of financial statement report at document level not yet GL master level: S_ALR_87012284 - Balance Sheet / Profit and Loss Statement .
Can any one tell how to proceed?
I have referred notes: Note 188663 - Enhancing selection views and dynamic selection.
But exactly I am unable to find which logical database has to be given?
regs,
ramesh bHi,
If you want to add extra field in your report you can do the setting in Layout selection. If it is not available kinldy check any SAP notes available or not. Otherwise do Zreport with your ABAPer.
Regards,
Mohan. -
How to add Document group in t code S_ALR_87012082 for dynamic selection.
Hi Gurus,
I Need to add Document group in t code S_ALR_87012082 for dynamic selection.
Currently here two groups are showing , Vender and Comp Code. i need to add Document group there. Kindly guide me in this.
Thanks in advance.Hi
Pls follow below report
*S_ALR_87012103 - List of Vendor Line Items *
In dynamic selections you can find Document number, there you can give the range
Reg
Vishnu -
Read Dynamic Selections for LDB ADA
Hi,
I have a report program using Logical Database ADA, but for performance reasons needed to include a wrapper program , so that the wrapper program schedules a job in case the report is run for huge volume comp codes.
Now the actual program uses the logical database ADA, which gives them the option of dynamic selections,So needed to add it to the wrapper also, since we they need to have the option to be able to enter conditions in Dynamic selections also. Now How do I pass the dynamic selections made in the wrapper to the actual program.Was planning to export the selection to memory and then import it.
I schedule the job or run it in foreground based on the selection made using the SUBMIT functionality.
Would be great if someone can let me know how to read the dynamic selections entered.
Thank you
LalithaHi,
You have to use SUBMIT statement with FREE SELECTIONS. Declare RSDS structure and fill them.
Just refer this block, similar type of code
Re: Reg: SUBMIT WITH Free Selections
Thanks & Regards
Bala Krishna -
Dynamic selection in program RFBILA00
Hi!
can any one tell how to add fields at document level ( for example trading partner in document) in dynamic selection of program RFBILA00.
Is there any relevant SAP notes?
regs,
ramesh BHello,
You can enter Trading partner field in dynamic selection at the G/L
account master record level.
When you enter the trading partner X in the dynamic selections, you
select only the accounts that have in the master data (transaction fs03)
the trading partner X.
The field trading partner that you see in the master data is stored
in the table ska1.
Unfortunatelly in dynamic selection in RFBILA00, it is not possible to
select the trading partner at document level.
Regards,
Renan -
How to get resultset from procedure having dynamic select sql query ?
Hi,
I have created a procedure, in which there is dynamic select query. The procedure has one out put parameter which gives error code. When I compile that procedure it compiles successufully. When I run it it executes successfully and gives output error code. But I don't know how to get resultset of that dynamic select sql query. I need that.
This is the procedure:
create or replace
PROCEDURE uspGetProductDetailsMultiOrder
v_DefinitionDBName IN VARCHAR2,
v_CommonDBName IN VARCHAR2,
v_Filter_FilledStatus IN VARCHAR2,
v_Filter_Internal_Counterparty IN nvarchar2,
v_Filter_NoteType IN nvarchar2,
v_Filter_Exchange IN nvarchar2,
v_Filter_Issuer IN nvarchar2,
v_Filter_Product_Category IN VARCHAR2,
v_DateToFilter IN VARCHAR2,
v_Filter_FromDate IN VARCHAR2,
v_Filter_ToDate IN VARCHAR2,
v_Active_YN_Flag IN NVARCHAR2,
v_Entity_ID IN NVARCHAR2,
v_ErrorNumber OUT NUMBER
as
v_SelectSQL nvarchar2(32767);
v_Setting_Name nvarchar2(32767);
v_Default_Value nvarchar2(32767);
v_Config_Value nvarchar2(32767);
v_CCY_ID NUMBER(10,0);
v_CCY_Data nvarchar2(32767);
v_CCY_List nvarchar2(32767);
v_Seq_Id NUMBER(10,0);
SWV_Active_YN_Flag NVARCHAR2(1);
SWV_VarStr long;--varchar2(4000);
SWV_TRANCOUNT NUMBER(10,0);
SWV_fnc_SplitString_Id_var1 NUMBER(10,0);
SWV_fnc_SplitString_Id_var0 NUMBER(10,0);
CURSOR RestrictTermsheetVisibilityByC
IS select CS.Setting_Name,Default_Value,Config_Value
from Config_Settings CS LEFT OUTER JOIN Entity_Config EC ON EC.Setting_ID = CS.Setting_ID
where EC.Entity_ID = v_Entity_ID AND Setting_Level = 'ENTITY';
CURSOR Get_RestrictCCY_List_Cursor IS SELECT Id_1,Data_1 FROM table(fnc_SplitString(v_Config_Value,','));
--CURSOR Get_RestrictCCY_List_Cursor IS SELECT Id,Data FROM imp;
CURSOR GetRestrictTemplateListCursor
-- is select id,data from imp;
IS SELECT Id_1,Data_1 FROM table(fnc_SplitString(v_Config_Value,',')) ;
--Parikshit 18-Jul-2010, active YN flag param added in SP
BEGIN
SWV_Active_YN_Flag := v_Active_YN_Flag;
if SWV_Active_YN_Flag = ' ' then
SWV_Active_YN_Flag := 'Y';
end if;
v_SelectSQL := ' ';
v_SelectSQL := v_SelectSQL || ' Select ';
v_SelectSQL := v_SelectSQL || ' NM.Note_Master_Id, NM.Product_Name, NM.Template_ID, NM.Template_Sr_No, NM.Asset, NM.Exchange, NM.Type, NM.Currency';
--SET @SelectSQL = @SelectSQL + ' , NM.Trade_Date, NM.Value_Date, NM.Valuation_Date, NM.Maturity_Date, NM.Tenor, NM.Strike_Price_Percentage, (case when (NM.Type like '' ELN%'' or NM.Type like ''RELN%'') THEN NOP.Issue_Price Else NM.Customer_Price End) as Customer_Price, NM.Dealer_Price, (case when (NM.Type like '' ELN%'' or NM.Type like ''RELN%'') THEN NOP.Customer_Yield Else NM.Customer_Yield End) as Customer_Yield, NOP.Dealer_Cost_PA as Internal_Cost '
v_SelectSQL := v_SelectSQL || ' , NM.Trade_Date, NM.Value_Date, NM.Valuation_Date, NM.Maturity_Date, NM.Tenor, NM.Strike_Price_Percentage, (case when (NM.PriceList_YN = ''Y'') THEN NOP.Issue_Price Else NM.Customer_Price End) as Customer_Price, NM.Dealer_Price, (case when (NM.PriceList_YN = ''Y'') THEN NOP.Customer_Yield Else NM.Customer_Yield End) as Customer_Yield, NOP.Dealer_Cost_PA as Internal_Cost ';
v_SelectSQL := v_SelectSQL || ' , NM.Minimum_Issue_Size, NM.Maximum_Issue_Size, NM.Minimum_Tolerence_Amount, NM.Maximum_Tolerence_Amount, NM.Trigger_Amount_Warning, nvl(NM.PerUnit_Equivalent_Amount,1) as PerUnit_Equivalent_Amount, NM.Active_YN_Flag, NM.Verify_YN_Flag ';
v_SelectSQL := v_SelectSQL || ' , NM.Tranche_YN_Flag, NM.Launch_Date, NM.Open_Date, NM.Close_Date, NM.PreHedged_YN, NM.Created_By, NM.Created_At, NM.Verified_At, NM.Verified_By, NM.ISIN, NM.Issuer';
v_SelectSQL := v_SelectSQL || ' , NM.Product_Catagory as Product_Category, NM.Note_Issuer_Type as Issuer_Category, NM.Series_No as Series_No, NM.Minimum_Investment_Amount ';
--Added by Parikshit on 14-Jun-2011, to remove the unwinding amounts from the total issue size
--SET @SelectSQL = @SelectSQL + ' , NOP.LastTimeWhenProductModified,NOP.Nominal_Amount as Current_Issue_Size, NOP.Filled_Status, NM.Counterparty as Internal_Counterparty '
v_SelectSQL := v_SelectSQL || ' , NOP.LastTimeWhenProductModified,(NOP.Nominal_Amount - nvl(ND.Unwind_Amount,0) ) as Current_Issue_Size, NOP.Filled_Status, NM.Counterparty as Internal_Counterparty ';
--********************************************************END
v_SelectSQL := v_SelectSQL || ' ,T2.Confirmed_Amount, T2.Confirmed_Shares';
v_SelectSQL := v_SelectSQL || ' , T3.Live_Deals';
v_SelectSQL := v_SelectSQL || ' , BS.Net_Trade_Hedged, BS.Net_Trade_Outstanding, BS.Hedged_Nominal_BUY, BS.Hedged_Nominal_SELL, BS.Outstanding_Nominal_BUY, BS.Outstanding_Nominal_SELL ';
v_SelectSQL := v_SelectSQL || ' , ( case When UPPER(NM.PreHedged_YN) = ''Y'' Then ''Launched'' ';
v_SelectSQL := v_SelectSQL || ' When ((NM.Maturity_Date IS NOT NULL) AND to_date(NM.Maturity_Date) <= to_date(sysdate)) Then ''Matured''';
v_SelectSQL := v_SelectSQL || ' When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NOT NULL) Then ''Launched''';
--Ready to launch
v_SelectSQL := v_SelectSQL || ' When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= NM.Minimum_Issue_Size) AND to_date(Close_Date) > to_date(sysdate) ) Then ''Ready To Launch''';
--Ready to launch
v_SelectSQL := v_SelectSQL || ' When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= (NM.Minimum_Issue_Size - NM.Minimum_Tolerence_Amount)) AND to_date(Close_Date)= to_date(sysdate) ) Then ''Ready To Launch''';
v_SelectSQL := v_SelectSQL || ' When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= (NM.Minimum_Issue_Size - NM.Minimum_Tolerence_Amount)) AND to_date(Close_Date)< to_date(sysdate) ) Then ''Ready To Launch''';
--Warning trigger reached
v_SelectSQL := v_SelectSQL || ' When (UPPER(NM.PreHedged_YN) = ''N'' AND NM.Launch_Date IS NOT NULL AND (T2.Confirmed_Amount >= NM.Trigger_Amount_Warning )) Then ''Warning Trigger Reached''';
v_SelectSQL := v_SelectSQL || ' Else ''Not Ready'' ';
v_SelectSQL := v_SelectSQL || ' End)Launch_Status';
v_SelectSQL := v_SelectSQL || ' , NI.Issuer_Code';
v_SelectSQL := v_SelectSQL || ' , (nvl(NOP.Nominal_Amount,0) - nvl(T2.Confirmed_Amount,0)) as Unconfirmed_Amount, NM.Upfront as Upfront, case when UPPER(NM.PreHedged_YN) = ''Y'' THEN 0 else (nvl(T2.Confirmed_Amount,0) - nvl(BS.Net_Trade_Hedged,0)) end as ReadyToHedge';
v_SelectSQL := v_SelectSQL || ' , NOP.Hard_Margin as Margin_Amount, NM.YearBasis as YearBasis, NM.Note_Product_Rating as Equity_Risk_Score, AD.Equity_Asset_Class ';
v_SelectSQL := v_SelectSQL || ' , NM.Note_Product_Rating as Product_Rating, NOP.PO_ID, AD.LotSize as Lot_Size, NM.Max_Orders_Per_Product as MAX_Orders, NOP.Order_Count as Current_Order_Count, nvl(NM.Denomination_Ccy,NM.Currency) as Denomination_Ccy, NM.Note_Scheme_Type as Underlying_Type, NM.Note_Asset_Class as Asset_Class, NULL as Product_Created_YN, NULL as Product_Created_ID, ( (case when NM.Note_Order_Type = '''' then N''Market'' else NM.Note_Order_Type end ) ) as Order_Type, NOP.Spot_Price, NM.Note_Price_Link, NOP.Strike_Price, NVL(NM.C_Fixing_Frequency,''Atmaturity'') as Fixing_Frequency, NM.Document_Uploaded_YN, NM.Document_Uploaded_At, NM.Document_Uploaded_By, NM.Document_File_Name, NM.Document_File_Extension, NM.Document_File_Path, NM.CutOff_Time, NM.Soft_Tenor, NM.NM_Sn_Code_All, NULL as Note_Price_Source, AD.LongName, NVL(NM.Pricelist_YN,''N'') as Pricelist_YN, AD.AlternateIdentifierAlias as Underlying, NM.Note_Issuer_Date_Offset, NM.Counterparty as Note_Counter_Party, NULL as
Note_Premium_PC ';
v_SelectSQL := v_SelectSQL || ' , NI.Issuer_Name, IP.Issuer_Id, IP.Broad_Cash, IP.Odd_Cash, IP.Account_Note, IP.Rounding, IP.Decimal_Truncate, IP.Misc1 as Recidual_YN, NM.Note_Issuer_Type, NM.Target_Coupon, C_Fixing_Frequency as C_Fixing_Frequency, NM.Callable_Frequency as Callable_Frequency, NM.Strike_Price_Percentage as C_Note_Strike_PC, NM.NM_Airbag_PC as Airbag_PC, C_Note_Barrier_PC as C_Note_Barrier_PC, TM.Template_Name, ''Product'' as Record_Type, NM.C_Settlement_Frequency, NM.Coupon_Frequency, NM.NM_Fixing_Source as Note_Fixing_Source, NM.Order_Entry_Type, (nvl(NM.Minimum_Issue_Size,0) - nvl(T2.Confirmed_Amount,0)) as Remaining_Launch_Amount, NM.C_Fixing_Start_Point, NM.C_Fixing_End_Point, NM.Order_Entry_Type, SC.Scheme_Alias, SC.Scheme_Name, CM.CM_ID, CM.CM_Name as Counterparty_Name, NM.NM_Other_Features as Other_Features, NM.Strike_Price_Percentage as Accrual_Strike, NM.NM_KnockIn as KnockIn, NM.NM_Airbag_Type, NM.NM_Put_strike as Put_Strike, NM.NM_Accrual_Strike,
NM.NM_Counterparty_Upfront, NM.Price_Updated_YN as Prices_Updated_YN, AD.Code as Asset_Name,NULL as KO_FREQ_TYPE, NM.Daily_Accumalation_Equities, NM.MaxNoAcc_days, NM.Guaranteed_Days, NM.Leverage_ratio, NM.NORM_IF, NM.NORM_PAIR, NM.NORM_FXRate ';
v_SelectSQL := v_SelectSQL || ' from ';
v_SelectSQL := v_SelectSQL || v_CommonDBName|| '.Note_Master NM ';
v_SelectSQL := v_SelectSQL || 'Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Issuer_Master NI ';
v_SelectSQL := v_SelectSQL || ' On NM.Issuer = (case when ISNUMERIC(NM.Issuer) = 0 then cast (NI.Issuer_Name as nvarchar2(25)) else cast(NI.Issuer_Id as nvarchar2(25)) end )';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Note_Order_Product NOP ';
v_SelectSQL := v_SelectSQL || ' On NOP.Note_Master_ID = NM.Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_DefinitionDBName||'.AssetDef AD ';
v_SelectSQL := v_SelectSQL || ' On AD.Code = NM.Asset';
v_SelectSQL := v_SelectSQL || ' AND AD.TypeAsset = substr(NM.Note_Asset_Class,1,2) ';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Issuer_Parameter IP ';
v_SelectSQL := v_SelectSQL || ' On NM.Issuer = (case when ISNUMERIC(NM.Issuer) = 0 then cast (IP.Issuer_Name as nvarchar2(25)) else cast(IP.Issuer_Id as nvarchar2(25)) end )';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Template_Master TM ';
v_SelectSQL := v_SelectSQL || ' On TM.Template_Id = NM.Template_ID ';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Scheme_Codes SC ';
v_SelectSQL := v_SelectSQL || ' On SC.Scheme_Alias = NM.Type';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Counterparty_Master CM ';
v_SelectSQL := v_SelectSQL || ' On CM.CM_ID = NM.Counterparty';
v_SelectSQL := v_SelectSQL || ' Left Outer Join ';
v_SelectSQL := v_SelectSQL || ' ( ';
v_SelectSQL := v_SelectSQL || ' Select Note_master_ID, sum(Nominal_Amt) as Unwind_Amount from ';
v_SelectSQL := v_SelectSQL || v_CommonDBName||'.Note_Deals ';
v_SelectSQL := v_SelectSQL || ' where Prematurity_Date IS NOT NULL';
v_SelectSQL := v_SelectSQL || ' AND (UPPER(Deletion_Reason ) = ''PART REDEMPTION'' or UPPER(Deletion_Reason ) = ''FULL REDEMPTION'')';
v_SelectSQL := v_SelectSQL || ' Group by Note_master_ID ';
v_SelectSQL := v_SelectSQL || ' ) ND ';
v_SelectSQL := v_SelectSQL || ' On ND.Note_Master_ID = NM.Note_Master_ID';
if (v_Filter_FilledStatus = ' ' OR UPPER(v_Filter_FilledStatus) = 'ALL' ) then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND NOP.Filled_Status IN (' || v_Filter_FilledStatus || ')';
end if;
--AND NOP.Internal_Counterparty = 'DEFAULT''
if(SUBSTR(to_char(v_Filter_Internal_Counterparty),1,4000)= ' ') then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND NOP.Internal_Counterparty IN (' || v_Filter_Internal_Counterparty || ')';
end if;
--SET @SelectSQL = @SelectSQL + ' --Filter--'
v_SelectSQL := v_SelectSQL || ' LEFT OUTER JOIN ';
v_SelectSQL := v_SelectSQL || ' (';
v_SelectSQL := v_SelectSQL || ' select Note_Master_ID, sum(Nominal_Amount) As Confirmed_Amount, sum(No_Of_Shares) As Confirmed_Shares ';
v_SelectSQL := v_SelectSQL || ' from '||v_CommonDBName||'.Note_Order_RM ';
v_SelectSQL := v_SelectSQL || ' Where substr(UPPER(Order_Status_Flag),1,6) = ''YYYYYY'' AND substr(substr(UPPER(Order_Status_Flag),1,7),-1,1) = ''N'' ';
v_SelectSQL := v_SelectSQL || ' group by Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' ) T2';
v_SelectSQL := v_SelectSQL || ' ON T2.Note_Master_ID = NM.Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' LEFT OUTER JOIN';
v_SelectSQL := v_SelectSQL || ' (';
v_SelectSQL := v_SelectSQL || ' Select ND.Note_Master_ID, sum(ND.Nominal_Amt) As Live_Deals ';
v_SelectSQL := v_SelectSQL || ' from '||v_CommonDBName||'.Note_Deals ND ';
v_SelectSQL := v_SelectSQL || ' where ND.Active_YNFlag = ''Y'' ';
v_SelectSQL := v_SelectSQL || ' group by Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' ) T3';
v_SelectSQL := v_SelectSQL || ' ON T3.Note_Master_ID = NM.Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' LEFT OUTER JOIN';
v_SelectSQL := v_SelectSQL || ' (';
v_SelectSQL := v_SelectSQL || ' SELECT NH_Note_Master_ID,';
v_SelectSQL := v_SelectSQL || ' (CAST(SUM(Hedged_Nominal_Buy) AS BINARY_FLOAT) -CAST(SUM(Hedged_Nominal_Sell) AS BINARY_FLOAT)) Net_Trade_Hedged,';
v_SelectSQL := v_SelectSQL || ' (CAST(SUM(Outstanding_Nominal_BUY) AS BINARY_FLOAT) -CAST(SUM(Outstanding_Nominal_SELL) AS BINARY_FLOAT)) Net_Trade_Outstanding,';
v_SelectSQL := v_SelectSQL || ' SUM(Hedged_Nominal_BUY) AS Hedged_Nominal_BUY,';
v_SelectSQL := v_SelectSQL || ' SUM(Hedged_Nominal_SELL) AS Hedged_Nominal_SELL,';
v_SelectSQL := v_SelectSQL || ' SUM(Outstanding_Nominal_BUY) AS Outstanding_Nominal_BUY,';
v_SelectSQL := v_SelectSQL || ' SUM(Outstanding_Nominal_SELL) As Outstanding_Nominal_SELL';
v_SelectSQL := v_SelectSQL || ' From';
v_SelectSQL := v_SelectSQL || ' (';
v_SelectSQL := v_SelectSQL || ' SELECT NH_Note_Master_ID,';
v_SelectSQL := v_SelectSQL || ' SUM(NH_Hedged_Nominal) AS Hedged_Nominal_BUY, 0 AS Hedged_Nominal_SELL,';
v_SelectSQL := v_SelectSQL || ' SUM(NH_Outstanding_Nominal) AS Outstanding_Nominal_BUY, 0 AS Outstanding_Nominal_SELL';
v_SelectSQL := v_SelectSQL || ' FROM '||v_CommonDBName||'.Note_Hedge ';
v_SelectSQL := v_SelectSQL || ' WHERE NH_Direction = ''BUY'' ';
v_SelectSQL := v_SelectSQL || ' GROUP BY NH_Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' Union';
v_SelectSQL := v_SelectSQL || ' SELECT NH_Note_Master_ID,';
v_SelectSQL := v_SelectSQL || ' 0 AS Hedged_Nominal_BUY, SUM(NH_Hedged_Nominal) AS Hedged_Nominal_SELL,';
v_SelectSQL := v_SelectSQL || ' 0 AS Outstanding_Nominal_BUY, SUM(NH_Outstanding_Nominal) AS Outstanding_Nominal_SELL';
v_SelectSQL := v_SelectSQL || ' FROM '||v_CommonDBName||'.Note_Hedge ';
v_SelectSQL := v_SelectSQL || ' WHERE NH_Direction = ''SELL'' ';
v_SelectSQL := v_SelectSQL || ' GROUP BY NH_Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' ) ';
v_SelectSQL := v_SelectSQL || ' GROUP BY NH_Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' ) BS';
v_SelectSQL := v_SelectSQL || ' ON BS.NH_Note_Master_ID = NM.Note_Master_ID';
v_SelectSQL := v_SelectSQL || ' Where NM.Verify_YN_Flag = ''Y'' ';
v_SelectSQL := v_SelectSQL || ' AND NM.Active_YN_Flag = ''' || SWV_Active_YN_Flag || '''';
if(SUBSTR(to_char(v_Filter_NoteType),1,4000) = ' ' OR UPPER(v_Filter_NoteType) = 'ALL' ) then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND NM.Type IN (' || v_Filter_NoteType || ')';
end if;
IF UPPER(v_Entity_ID) <> 'ALL' then
OPEN RestrictTermsheetVisibilityByC;
FETCH RestrictTermsheetVisibilityByC INTO v_Setting_Name,v_Default_Value,v_Config_Value;
WHILE RestrictTermsheetVisibilityByC%FOUND LOOP
--2) Convert comma separated ccy (CNY,HKD,USD) string to single quote ccy with comma separated Ccy ('CNY','HKD','USD') string
if (UPPER(v_Setting_Name) = 'RESTRICT_TERMSHEET_VISIBILITY_BY_CCY') then
if v_Config_Value is not null then
SELECT COUNT(Id_1) INTO SWV_fnc_SplitString_Id_var0 FROM TABLE(fnc_SplitString(v_Config_Value,',')) ;
IF (SWV_fnc_SplitString_Id_var0 > 0) then
--print 'Before Single quote separated ccy : ' + '''' + @Config_Value + ''''
v_Seq_Id := 0;
OPEN Get_RestrictCCY_List_Cursor;
FETCH Get_RestrictCCY_List_Cursor
INTO v_CCY_ID,v_CCY_Data;
WHILE Get_RestrictCCY_List_Cursor%FOUND LOOP
if v_Seq_Id = 0 then
v_CCY_List := '''' || v_CCY_Data || '''';
else
v_CCY_List := v_CCY_List || ',' || '''' || v_CCY_Data || '''';
end if;
v_Seq_Id := v_Seq_Id+1;
FETCH Get_RestrictCCY_List_Cursor INTO v_CCY_ID,v_CCY_Data;
END LOOP;
CLOSE Get_RestrictCCY_List_Cursor;
--print 'After Single quote ccy : ' + @CCY_List
v_SelectSQL := v_SelectSQL || ' AND nvl(NM.Denomination_Ccy,NM.Currency) NOT IN (' || v_CCY_List || ')';
end if;
end if;
end if;
--3) Convert comma separated template (ELN,BELN,BELN_B) string to single quote template code with comma separated template ('ELN','BELN','BELN_B') string
if (UPPER(v_Setting_Name) = 'RESTRICT_TERMSHEET_VISIBILITY_BY_SUBSCHEME') then
if v_Config_Value is not null then
SELECT COUNT(Id_1) INTO SWV_fnc_SplitString_Id_var1 FROM TABLE(fnc_SplitString(v_Config_Value,',')) ;
IF (SWV_fnc_SplitString_Id_var1 > 0) then
v_Seq_Id := 0;
OPEN GetRestrictTemplateListCursor;
FETCH GetRestrictTemplateListCursor
INTO v_CCY_ID,v_CCY_Data;
WHILE GetRestrictTemplateListCursor%FOUND
LOOP
if v_Seq_Id = 0 then
v_CCY_List := '''' || v_CCY_Data || '''';
else
v_CCY_List := v_CCY_List || ',' || '''' || v_CCY_Data || '''';
end if;
v_Seq_Id := v_Seq_Id+1;
FETCH GetRestrictTemplateListCursor INTO v_CCY_ID,v_CCY_Data;
END LOOP;
CLOSE GetRestrictTemplateListCursor;
--print 'After Single quote template code: ' + @CCY_List
v_SelectSQL := v_SelectSQL || ' AND TM.Template_Code NOT IN (' || v_CCY_List || ')';
end if;
end if;
end if;
FETCH RestrictTermsheetVisibilityByC INTO v_Setting_Name,v_Default_Value,v_Config_Value;
END LOOP;
CLOSE RestrictTermsheetVisibilityByC;
end if;
if (v_Filter_Exchange = ' ' OR UPPER(v_Filter_Exchange) = 'ALL') then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND NM.Exchange IN (' || v_Filter_Exchange || ')';
end if;
--SET @SelectSQL = @SelectSQL + ' --AND NM.Issuer = 4'
if (v_Filter_Issuer = ' ' OR UPPER(v_Filter_Issuer) = 'ALL') then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND NM.Issuer IN (' || v_Filter_Issuer || ')';
end if;
if v_Filter_Product_Category = ' ' then
v_SelectSQL := v_SelectSQL || ' ';
else
v_SelectSQL := v_SelectSQL || ' AND UPPER(NM.Note_Issuer_Type) IN (''' || v_Filter_Product_Category || ''')';
end if;
if UPPER(v_DateToFilter) = 'NA' then
v_SelectSQL := v_SelectSQL || ' ';
else
if UPPER(v_DateToFilter) = 'CLOSE_DATE' then
v_SelectSQL := v_SelectSQL || ' AND to_char( '|| v_DateToFilter || ') >= to_date(''' || v_Filter_ToDate || ''');
-- AND convert(smalldatetime,''' || v_Filter_ToDate || ''',106) ';
else
v_SelectSQL := v_SelectSQL || ' AND to_char(''' || v_DateToFilter || ''') BETWEEN to_date(''' || v_Filter_FromDate || ''') AND to_date(''' || v_Filter_ToDate || ''') ';
end if;
end if;
v_SelectSQL := v_SelectSQL || ' Order by NM.Product_Name';
SWV_VarStr := v_SelectSQL;
DBMS_OUTPUT.PUT_LINE(SWV_VarStr);
EXECUTE IMMEDIATE SWV_VarStr;
IF SQLCODE <> 0 then
GOTO ERROR_HANDLER;
end if;
IF SQL%rowcount > 0 then
COMMIT;
SWV_TRANCOUNT := SWV_TRANCOUNT -1;
end if; --Commit Transaction
v_ErrorNumber := SQLCODE;
RETURN;
<< ERROR_HANDLER >> v_ErrorNumber := SQLCODE;
ROLLBACK;
SWV_TRANCOUNT := 0; --Rollback Transaction
RETURN;
END;Please suggest something. Thanks
Edited by: BluShadow on 30-Nov-2011 11:00
added {noformat}{noformat} tags for formatting of code. Please read {message:id=9360002} to learn to do this yourself in future.Connecting to the database sample_adf_finiq_common.
Select NM.Note_Master_Id, NM.Product_Name, NM.Template_ID, NM.Template_Sr_No, NM.Asset, NM.Exchange, NM.Type, NM.Currency , NM.Trade_Date, NM.Value_Date, NM.Valuation_Date, NM.Maturity_Date, NM.Tenor, NM.Strike_Price_Percentage, (case when (NM.PriceList_YN = 'Y') THEN NOP.Issue_Price Else NM.Customer_Price End) as Customer_Price, NM.Dealer_Price, (case when (NM.PriceList_YN = 'Y') THEN NOP.Customer_Yield Else NM.Customer_Yield End) as Customer_Yield, NOP.Dealer_Cost_PA as Internal_Cost , NM.Minimum_Issue_Size, NM.Maximum_Issue_Size, NM.Minimum_Tolerence_Amount, NM.Maximum_Tolerence_Amount, NM.Trigger_Amount_Warning, nvl(NM.PerUnit_Equivalent_Amount,1) as PerUnit_Equivalent_Amount, NM.Active_YN_Flag, NM.Verify_YN_Flag , NM.Tranche_YN_Flag, NM.Launch_Date, NM.Open_Date, NM.Close_Date, NM.PreHedged_YN, NM.Created_By, NM.Created_At, NM.Verified_At, NM.Verified_By, NM.ISIN, NM.Issuer , NM.Product_Catagory as Product_Category, NM.Note_Issuer_Type as Issuer_Category, NM.Series_No as Series_No, NM.Minimum_Investment_Amount , NOP.LastTimeWhenProductModified,(NOP.Nominal_Amount - nvl(ND.Unwind_Amount,0) ) as Current_Issue_Size, NOP.Filled_Status, NM.Counterparty as Internal_Counterparty ,T2.Confirmed_Amount, T2.Confirmed_Shares , T3.Live_Deals , BS.Net_Trade_Hedged, BS.Net_Trade_Outstanding, BS.Hedged_Nominal_BUY, BS.Hedged_Nominal_SELL, BS.Outstanding_Nominal_BUY, BS.Outstanding_Nominal_SELL , ( case When UPPER(NM.PreHedged_YN) = 'Y' Then 'Launched' When ((NM.Maturity_Date IS NOT NULL) AND to_date(NM.Maturity_Date) <= to_date(sysdate)) Then 'Matured' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NOT NULL) Then 'Launched' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= NM.Minimum_Issue_Size) AND to_date(Close_Date) > to_date(sysdate) ) Then 'Ready To Launch' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= (NM.Minimum_Issue_Size - NM.Minimum_Tolerence_Amount)) AND to_date(Close_Date)= to_date(sysdate) ) Then 'Ready To Launch' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NULL AND (T2.Confirmed_Amount >= (NM.Minimum_Issue_Size - NM.Minimum_Tolerence_Amount)) AND to_date(Close_Date)< to_date(sysdate) ) Then 'Ready To Launch' When (UPPER(NM.PreHedged_YN) = 'N' AND NM.Launch_Date IS NOT NULL AND (T2.Confirmed_Amount >= NM.Trigger_Amount_Warning )) Then 'Warning Trigger Reached' Else 'Not Ready' End)Launch_Status , NI.Issuer_Code , (nvl(NOP.Nominal_Amount,0) - nvl(T2.Confirmed_Amount,0)) as Unconfirmed_Amount, NM.Upfront as Upfront, case when UPPER(NM.PreHedged_YN) = 'Y' THEN 0 else (nvl(T2.Confirmed_Amount,0) - nvl(BS.Net_Trade_Hedged,0)) end as ReadyToHedge , NOP.Hard_Margin as Margin_Amount, NM.YearBasis as YearBasis, NM.Note_Product_Rating as Equity_Risk_Score, AD.Equity_Asset_Class , NM.Note_Product_Rating as Product_Rating, NOP.PO_ID, AD.LotSize as Lot_Size, NM.Max_Orders_Per_Product as MAX_Orders, NOP.Order_Count as Current_Order_Count, nvl(NM.Denomination_Ccy,NM.Currency) as Denomination_Ccy, NM.Note_Scheme_Type as Underlying_Type, NM.Note_Asset_Class as Asset_Class, NULL as Product_Created_YN, NULL as Product_Created_ID, ( (case when NM.Note_Order_Type = '' then N'Market' else NM.Note_Order_Type end ) ) as Order_Type, NOP.Spot_Price, NM.Note_Price_Link, NOP.Strike_Price, NVL(NM.C_Fixing_Frequency,'Atmaturity') as Fixing_Frequency, NM.Document_Uploaded_YN, NM.Document_Uploaded_At, NM.Document_Uploaded_By, NM.Document_File_Name, NM.Document_File_Extension, NM.Document_File_Path, NM.CutOff_Time, NM.Soft_Tenor, NM.NM_Sn_Code_All, NULL as Note_Price_Source, AD.LongName, NVL(NM.Pricelist_YN,'N') as Pricelist_YN, AD.AlternateIdentifierAlias as Underlying, NM.Note_Issuer_Date_Offset, NM.Counterparty as Note_Counter_Party, NULL as
Note_Premium_PC , NI.Issuer_Name, IP.Issuer_Id, IP.Broad_Cash, IP.Odd_Cash, IP.Account_Note, IP.Rounding, IP.Decimal_Truncate, IP.Misc1 as Recidual_YN, NM.Note_Issuer_Type, NM.Target_Coupon, C_Fixing_Frequency as C_Fixing_Frequency, NM.Callable_Frequency as Callable_Frequency, NM.Strike_Price_Percentage as C_Note_Strike_PC, NM.NM_Airbag_PC as Airbag_PC, C_Note_Barrier_PC as C_Note_Barrier_PC, TM.Template_Name, 'Product' as Record_Type, NM.C_Settlement_Frequency, NM.Coupon_Frequency, NM.NM_Fixing_Source as Note_Fixing_Source, NM.Order_Entry_Type, (nvl(NM.Minimum_Issue_Size,0) - nvl(T2.Confirmed_Amount,0)) as Remaining_Launch_Amount, NM.C_Fixing_Start_Point, NM.C_Fixing_End_Point, NM.Order_Entry_Type, SC.Scheme_Alias, SC.Scheme_Name, CM.CM_ID, CM.CM_Name as Counterparty_Name, NM.NM_Other_Features as Other_Features, NM.Strike_Price_Percentage as Accrual_Strike, NM.NM_KnockIn as KnockIn, NM.NM_Airbag_Type, NM.NM_Put_strike as Put_Strike, NM.NM_Accrual_Strike,
NM.NM_Counterparty_Upfront, NM.Price_Updated_YN as Prices_Updated_YN, AD.Code as Asset_Name,NULL as KO_FREQ_TYPE, NM.Daily_Accumalation_Equities, NM.MaxNoAcc_days, NM.Guaranteed_Days, NM.Leverage_ratio, NM.NORM_IF, NM.NORM_PAIR, NM.NORM_FXRate from Sample_ADF_finiq_Common.Note_Master NM Left Outer Join Sample_ADF_finiq_Common.Issuer_Master NI On NM.Issuer = (case when ISNUMERIC(NM.Issuer) = 0 then cast (NI.Issuer_Name as nvarchar2(25)) else cast(NI.Issuer_Id as nvarchar2(25)) end ) Left Outer Join Sample_ADF_finiq_Common.Note_Order_Product NOP On NOP.Note_Master_ID = NM.Note_Master_ID Left Outer Join Sample_ADF_finiq_Common.AssetDef AD On AD.Code = NM.Asset AND AD.TypeAsset = substr(NM.Note_Asset_Class,1,2) Left Outer Join Sample_ADF_finiq_Common.Issuer_Parameter IP On NM.Issuer = (case when ISNUMERIC(NM.Issuer) = 0 then cast (IP.Issuer_Name as nvarchar2(25)) else cast(IP.Issuer_Id as nvarchar2(25)) end ) Left Outer Join Sample_ADF_finiq_Common.Template_Master TM On TM.Template_Id = NM.Template_ID Left Outer Join Sample_ADF_finiq_Common.Scheme_Codes SC On SC.Scheme_Alias = NM.Type Left Outer Join Sample_ADF_finiq_Common.Counterparty_Master CM On CM.CM_ID = NM.Counterparty Left Outer Join ( Select Note_master_ID, sum(Nominal_Amt) as Unwind_Amount from Sample_ADF_finiq_Common.Note_Deals where Prematurity_Date IS NOT NULL AND (UPPER(Deletion_Reason ) = 'PART REDEMPTION' or UPPER(Deletion_Reason ) = 'FULL REDEMPTION') Group by Note_master_ID ) ND On ND.Note_Master_ID = NM.Note_Master_ID AND NOP.Internal_Counterparty IN (1) LEFT OUTER JOIN ( select Note_Master_ID, sum(Nominal_Amount) As Confirmed_Amount, sum(No_Of_Shares) As Confirmed_Shares from Sample_ADF_finiq_Common.Note_Order_RM Where substr(UPPER(Order_Status_Flag),1,6) = 'YYYYYY' AND substr(substr(UPPER(Order_Status_Flag),1,7),-1,1) = 'N' group by Note_Master_ID ) T2 ON T2.Note_Master_ID = NM.Note_Master_ID LEFT OUTER JOIN ( Select ND.Note_Master_ID, sum(ND.Nominal_Amt) As Live_Deals from Sample_ADF_finiq_Common.Note_Deals ND where ND.Active_YNFlag = 'Y' group by Note_Master_ID ) T3 ON T3.Note_Master_ID = NM.Note_Master_ID LEFT OUTER JOIN ( SELECT NH_Note_Master_ID, (CAST(SUM(Hedged_Nominal_Buy) AS BINARY_FLOAT) -CAST(SUM(Hedged_Nominal_Sell) AS BINARY_FLOAT)) Net_Trade_Hedged, (CAST(SUM(Outstanding_Nominal_BUY) AS BINARY_FLOAT) -CAST(SUM(Outstanding_Nominal_SELL) AS BINARY_FLOAT)) Net_Trade_Outstanding, SUM(Hedged_Nominal_BUY) AS Hedged_Nominal_BUY, SUM(Hedged_Nominal_SELL) AS Hedged_Nominal_SELL, SUM(Outstanding_Nominal_BUY) AS Outstanding_Nominal_BUY, SUM(Outstanding_Nominal_SELL) As Outstanding_Nominal_SELL From ( SELECT NH_Note_Master_ID, SUM(NH_Hedged_Nominal) AS Hedged_Nominal_BUY, 0 AS Hedged_Nominal_SELL, SUM(NH_Outstanding_Nominal) AS Outstanding_Nominal_BUY, 0 AS Outstanding_Nominal_SELL FROM Sample_ADF_finiq_Common.Note_Hedge WHERE NH_Direction = 'BUY' GROUP BY NH_Note_Master_ID Union SELECT NH_Note_Master_ID, 0 AS Hedged_Nominal_BUY, SUM(NH_Hedged_Nominal) AS Hedged_Nominal_SELL, 0 AS Outstanding_Nominal_BUY, SUM(NH_Outstanding_Nominal) AS Outstanding_Nominal_SELL FROM Sample_ADF_finiq_Common.Note_Hedge WHERE NH_Direction = 'SELL' GROUP BY NH_Note_Master_ID ) GROUP BY NH_Note_Master_ID ) BS ON BS.NH_Note_Master_ID = NM.Note_Master_ID Where NM.Verify_YN_Flag = 'Y' AND NM.Active_YN_Flag = 'Y' AND UPPER(NM.Note_Issuer_Type) IN ('Internal') AND to_char('16-oct-11') BETWEEN to_date('15-oct-11') AND to_date('17-oct-11') Order by NM.Product_Name
V_ERRORNUMBER = 0
Process exited.
Disconnecting from the database sample_adf_finiq_common.
here v_errornumber=0 is the output when i run it in oracle sql developer. -
Problem in dynamic selection in vendor balance report tcode S_ALR_87012082
Hello Friends,
After upgrading from 4.7 to ecc 6.0 we are facing the below mentioned problem.
In a Vendor Balances report, the document selection is not available in the dynamic selections and hence i am not able to select the business area to suit the requirement. We have only, vendor master and company code in the dynamic selections.
Is there any customization tht needs to be set???
Thanks,
SunnyHi Vas,
I am not sure..... but you can view the details in "S_ALR_87012079", you need to chnage the layout....
If the hint is useful Say thanks by reward .
Regards,
Prabhu Rajesh -
Hi,
When they use FBL5N to minimize the selection of data to the Branch level they need to open the Dynamic Selections area of the selection screen, scroll down (page down several times) in the left panel in a long list of available fields to find "Branch account", double click on the field to activate it in the right panel. Once activated the Branch number can be entered in the screen to see only the documents related to the Branch.
It would be quicker and more efficient if the Branch account field was defaulted to active in the Dynamic Selections area in FBL5N. The default setting will save the scrolling and clicking part of getting the Branch data and make the system easier to use.
The change will create a transportable Workbench request.
Can anyone please explain how to bring this Branch account field in Dynamic selection as has been mentioned above.
I will be grateful
Warm RegardsHi,
Please refer the below link for the process to add/remove any fields in the dynamic selection. If you want any field to selected by default on the right side of the screen then, in T.Code: SE36 for the Logical Database (refer the below link) you need to preselect the desired field.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b0e0039a-0d79-2c10-0aaf-9f6c062c0ffb?quicklink=index&overridelayout=true
Regards,
Kiron Kumar T. -
How to add a field in dynamic selections
HI,
There is a requirement in which i need to add a field in existing program of dynamic selections.
I have added a field in the screen.But I was not able to write the label and is not displaying.
I ahve copied evrything from existing coding.but still.
In the program ,Field groups are being used.
I have inserted my field in that header and item of field groups.
But i was not able to select the data based on this selection.
i will attach my code here for reference.
can anyone please help me how to use these filed symbols.
If possible send me the document on Dynamic selections.
the field i need to add is bkpf-bktxt
TABLES:
tcurx,
lfa1,
kna1,
bhdgd,
bkpf,
bseg,
bsega,
b0sg,
fimsg,
sarkey,
t001,
vbset,
sscrfields.
Selektionsparameter *
begin_of_block 1.
PARAMETERS:
par_nbel LIKE rfpdo-bpetnbel, "Normale Belege
par_vbel LIKE rfpdo-epojvbel, "Vorerfaßte Belege
par_sbel LIKE rfpdo-bpetsbel, "Statistischen Belege
par_mbel LIKE rfpdo-epojmbel, "Musterbelege
par_dbel LIKE rfpdo1-korbdbel. "Dauerbuchungsurbelege
end_of_block 1.
begin_of_block 2.
PARAMETERS:
par_summ LIKE rfpdo1-allgsumm, "nur Summenausgabe
par_hkto LIKE rfpdo2-beljhkto, "Hauptbuch- statt Personenkonto
par_altk LIKE rfpdo1-allgaltk, "alternative Kontonummer
par_lsep LIKE rfpdo-allglsep, "Listseparation
par_mikf LIKE rfpdo-allgmikf, "Mikrofiche-Zeile
par_line LIKE rfpdo1-allgline. "Zusatztitel
Eingaben für optische Archivierung
SELECTION-SCREEN BEGIN OF LINE.
PARAMETERS: arc LIKE rfpdo1-allgarch.
SELECTION-SCREEN COMMENT 3(29) text-103 FOR FIELD arc.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS: arc_msg1(10) MODIF ID arc.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN POSITION POS_LOW.
PARAMETERS: arc_msg2(10) MODIF ID arc.
SELECTION-SCREEN END OF LINE.
end_of_block 2.
PARAMETERS: arc_mem LIKE arc_params NO-DISPLAY.
Felder und Feldleisten *
CONSTANTS:
con_true TYPE i VALUE 1,
con_false TYPE i VALUE 2,
con_hash TYPE i VALUE 1,
con_vendor TYPE c VALUE 'K',
con_cust TYPE c VALUE 'D'.
Global Data
DATA: BEGIN OF hash_totals OCCURS 25,
bukrs LIKE t001-bukrs,
poper(7),
dramt LIKE bseg-wrbtr,
cramt LIKE bseg-wrbtr,
END OF hash_totals.
DATA:
factor TYPE i,
Zähler
cnt_bukrs(4) TYPE p, "Anzahl Buchungskreise
cnt_max LIKE sy-tfill, "Maximum der CNT_Ti
cnt_t0 LIKE sy-tfill, "Anzahl Einträge in Ti
cnt_t1 LIKE sy-tfill,
cnt_t2 LIKE sy-tfill,
cnt_t3 LIKE sy-tfill,
cnt_t4 LIKE sy-tfill,
cnt_t5 LIKE sy-tfill,
Fehler
err_altkt(1) TYPE c, "alt. Kontonummer nicht gefunden
Flags
flg_section TYPE i,
flg_vendr2 TYPE i,
flg_vendr3 TYPE i,
flg_color(1) TYPE n, "0 - intensified off
Hilfsfelder
hlp_belnr(10) TYPE c, "Anzeigefeld Belegnummer
hlp_bstat LIKE bkpf-bstat, "Status vorerfaßter Belege
hlp_buper(7) TYPE c, "Buchungsperiode mit '/'
hlp_null(1) TYPE p VALUE 0, "Betrag Null
hlp_sakan LIKE ska1-sakan, "Anzeigefeld Kontonummer
hlp_wrshb(26) TYPE c, "FW-Betrag mit Währung in Klammer
hlp_vnd_amt(43) TYPE c,
Texte
txt_line0(132) TYPE c, "Überschriften
txt_line1(132) TYPE c,
txt_line2(132) TYPE c,
txt_line(132) TYPE c, "Hilfstext
Feldleisten
BEGIN OF mikfi, "Information Mikrofiche-Zeile
bstat LIKE bkpf-bstat,
bukrs LIKE bkpf-bukrs,
gjahr LIKE bkpf-gjahr,
belnr LIKE bkpf-belnr,
END OF mikfi.
Interne Tabellen *
DATA:
Belegkopfinformationen
BEGIN OF t0 OCCURS 4, "0 - allgemeine Angaben
info(1) TYPE n, "1 - vorerfaßter Beleg
END OF t0, "2 - Referenz
"3 - Storno
"4 - gelöschter vorerfaßter Beleg
"5 - ersetzter vorerfaßter Beleg
"6 - Ausgleichsbeleg
"7 - zurückgenommener Ausgleich
Personenkonteninformationen je Beleg
BEGIN OF t1 OCCURS 10,
koart LIKE bseg-koart, "Kontoart
ktonr LIKE bseg-kunnr, "Kontonummer(Debitor/Kreditor)
bschl LIKE bseg-bschl, "Buchungsschlüssel
xnegp LIKE bseg-xnegp, "Negativbuchung
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
zlspr LIKE bseg-zlspr, "Payment Block Key - CR 21709
dmshb LIKE bsega-dmshb, "Soll-Haben Betrag in Hauswährung
wrshb LIKE bsega-dmshb, "Betrag in Fremdwährung
xfwae(1) TYPE c, "X - Fremdwährungsinformation
name1 LIKE lfa1-name1, "Customer/ Vendor Name
END OF t1,
Steuerinformationen je Beleg
BEGIN OF t2 OCCURS 10,
mwskz LIKE bseg-mwskz, "Mehrwertsteuerkennzeichen
dmshb LIKE bsega-dmshb, "Soll-Haben Betrag in Hauswährung
END OF t2,
Sachkonteninformationen je Beleg
BEGIN OF t3 OCCURS 20,
mwskz LIKE bseg-mwskz, "Mehrwertsteuerkennzeichen
bschl LIKE bseg-bschl, "Buchungsschlüssel
xnegp LIKE bseg-xnegp, "Negativbuchung
koart LIKE bseg-koart, "Kontoart
hkont LIKE bseg-hkont, "Hauptbuchkonto
dmshb LIKE bsega-dmshb, "Soll-Haben Betrag in Hauswährung
kostl LIKE bseg-kostl, "Cost Center
prctr LIKE bseg-prctr, "Profit Center
END OF t3,
Sonderhauptbuchbeträge für Debitoren (nur Ausgabe)
BEGIN OF t4 OCCURS 5,
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF t4,
Sonderhauptbuchbeträge für Kreditoren (nur Ausgabe)
BEGIN OF t5 OCCURS 5,
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF t5,
Summeninformationen je Buchungskreis
BEGIN OF tbukrs OCCURS 20,
bstat LIKE bkpf-bstat, "Belegstatus
bukrs LIKE bkpf-bukrs, "Buchungskreis
START OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
bktxt LIKE bkpf-bktxt,
END OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
waers LIKE t001-waers, "Währungsschlüssel (nur Ausgabe)
END OF tbukrs,
Sonderhauptbuchinformationen je Buchungskreis
BEGIN OF tbukrs_u OCCURS 20,
bstat LIKE bkpf-bstat, "Belegstatus
bukrs LIKE bkpf-bukrs, "Buchungskreis
START OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
bktxt LIKE bkpf-bktxt,
END OF CHANGE FOR CR63816 by OS0794 on 01/29/2008
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
koart LIKE bseg-koart, "Kontoart
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
waers LIKE t001-waers, "Währungsschlüssel (nur Ausgabe)
END OF tbukrs_u,
Summeninformationen je Hauswährung
BEGIN OF twaers OCCURS 10,
bstat LIKE bkpf-bstat, "Belegstatus
waers LIKE t001-waers, "Hauswährungsschlüssel
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF twaers,
Sonderhauptbuchinformationen je Hauswährung
BEGIN OF twaers_u OCCURS 20,
bstat LIKE bkpf-bstat, "Belegstatus
waers LIKE t001-waers, "Währungsschlüssel
gjahr LIKE bkpf-gjahr, "Buchungsjahr
monat LIKE bkpf-monat, "Buchungsmonat
koart LIKE bseg-koart, "Kontoart
umskz LIKE bseg-umskz, "Sonderumsatzkennzeichen
dmsol(9) TYPE p, "Soll-Betrag Hauswährung
dmhab(9) TYPE p, "Haben-Betrag Hauswährung
END OF twaers_u,
Fehlerprotokoll im Batch
BEGIN OF tfimsg OCCURS 10.
INCLUDE STRUCTURE fimsg.
DATA END OF tfimsg.
Strukturen für optische Archivierung *
DATA BEGIN OF info OCCURS 10.
INCLUDE STRUCTURE bhinf.
DATA END OF info.
DATA:
arc_save LIKE arc_params,
arc_valid.
Feldgruppen *
FIELD-GROUPS: header, daten.
INSERT:
bkpf-bukrs "Buchungskreis
bkpf-bktxt "Change by OS0794
bkpf-bstat "Belegstatus
bkpf-gjahr "Geschäftsjahr
bkpf-belnr "Belegnummer
bseg-buzei "Buchungszeile
INTO header.
INSERT
bkpf-blart "Belegart
bkpf-bktxt "Change by OS0794
bkpf-budat "Buchungsdatum
bkpf-stblg "Stornobelegnummer
bkpf-waers "Währungsschlüssel
bkpf-xblnr "Referenzangabe
bseg-bschl "Buchungsschlüssel
bseg-xnegp "Negativbuchung
bseg-zlspr "Payment Block Key - CR 21709
bseg-hkont "Hauptbuchkonto
bseg-koart "Kontoart
bseg-kunnr "Debitornummer
bseg-lifnr "Kreditornummer
bseg-mwart "Mehrwertsteuerart (A oder V)
bseg-mwskz "Mehrwertsteuerkennzeichen
bseg-umskz "Sonderhauptbuch-Kennzeichen
bsega-dmshb "S/H-Betrag in Hauswährung
bsega-mdshb "Umsatzsteuerbetrag in Hauswährg
bsega-wrshb "S/H-Betrag in Fremdwährung
hlp_bstat "Status vorerfaßter Belege bzw.
bseg-kostl
bseg-prctr
bkpf-monat
INTO daten. "Status von Belegen ohne Zeilen
Vorschlagswerte *
INITIALIZATION.
get_frame_title: 1,2.
par_nbel = 'X'.
par_sbel = space.
par_mbel = space.
par_dbel = space.
par_vbel = 'X'.
Archivinformationen nur fuer Ausgabe *
AT SELECTION-SCREEN OUTPUT.
LOOP AT SCREEN.
IF screen-group1 = 'ARC'.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
Prüfung und Korrektur der eingegebenen Daten *
AT SELECTION-SCREEN ON arc.
IF arc <> ' ' AND arc_mem(20) = space.
CALL FUNCTION 'GET_ARCHIVE_PARAMETERS'
EXPORTING
in_parameters = arc_save
printer = ' '
IMPORTING
out_parameters = arc_mem
valid = arc_valid
EXCEPTIONS
OTHERS = 04.
IF arc_valid <> 'X' OR arc_mem = space.
CLEAR arc_mem.
MESSAGE e999 WITH text-102.
ENDIF.
arc_msg1 = arc_mem(10).
arc_msg2 = arc_mem+10(10).
ENDIF.
IF arc = ' '.
CLEAR arc_mem.
arc_msg1 = arc_msg2 = space.
ENDIF.
arc_save = arc_mem.
AT SELECTION-SCREEN ON arc_msg1.
arc_msg1 = arc_mem(10).
AT SELECTION-SCREEN ON arc_msg2.
arc_msg2 = arc_mem+10(10).
AT SELECTION-SCREEN.
IF par_nbel EQ space AND
par_mbel EQ space AND
par_dbel EQ space AND
par_sbel EQ space AND
par_vbel EQ space.
SET CURSOR FIELD 'PAR_NBEL'.
MESSAGE e111.
ENDIF.
optische Archivierung
IF arc <> ' ' AND par_mikf <> ' '.
CLEAR arc_mem.
MESSAGE e999 WITH text-100.
ENDIF.
IF arc <> ' ' AND par_lsep <> ' '.
CLEAR arc_mem.
MESSAGE e999 WITH text-101.
ENDIF.
IF arc = 'X' AND sscrfields-ucomm = 'PRIN'.
sscrfields-ucomm = 'ONLI'.
sy-pdest = 'LP01'. "wegen Abfrage in Batch-Heading
ENDIF.
Vorbelegungen *
START-OF-SELECTION.
bhdgd-lines = sy-linsz.
bhdgd-repid = sy-repid.
bhdgd-uname = sy-uname.
bhdgd-separ = par_lsep.
bhdgd-domai = 'BUKRS'.
IF arc = 'X'.
bhdgd-miffl = 'A'.
ENDIF.
IF par_mikf = 'X'.
bhdgd-miffl = 'X'.
ENDIF.
Initialisierung für optisches Archiv
PERFORM open_archive(rsbtchh0) USING arc_mem.
info-name = 'BKPF-BSTAT'. info-len = space. APPEND info.
info-name = 'BKPF-BUKRS'. info-len = space. APPEND info.
info-name = 'BSEG-GJAHR'. info-len = space. APPEND info.
info-name = 'BKPF-BELNR'. info-len = space. APPEND info.
info-name = 'BKPF-BKTXT'. info-len = space. APPEND info.
PERFORM start_archive(rsbtchh0) TABLES info.
b0sg-xstan = par_nbel.
b0sg-xstam = par_mbel.
b0sg-xstad = par_dbel.
b0sg-xstas = par_sbel.
b0sg-xstaa = 'X'.
IF par_vbel EQ 'X'.
b0sg-xstav = 'Z'.
ENDIF.
Selektion *
GET bkpf FIELDS blart bstat budat monat stblg waers xblnr bktxt.
CLEAR hlp_bstat.
IF 'ABVWZ' CA bkpf-bstat.
hlp_bstat = bkpf-bstat.
CLEAR bkpf-bstat.
IF 'ABWZ' CA hlp_bstat.
CLEAR: bseg, bsega.
IF par_summ EQ space.
EXTRACT daten.
ENDIF.
PERFORM summe_merken.
ENDIF.
ENDIF.
GET bseg.
IF par_summ EQ space.
EXTRACT daten.
ENDIF.
PERFORM summe_merken.
GET bkpf LATE.
PERFORM vorerfasste_steuer_merken.
Seitenkopf *
TOP-OF-PAGE.
PERFORM batch-heading(rsbtchh0).
ULINE.
IF flg_section <> con_hash.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE / txt_line0.
ULINE.
FORMAT COLOR 1 INTENSIFIED.
WRITE: / txt_line1,
/ txt_line2.
ELSE.
FORMAT COLOR 1 INTENSIFIED OFF.
WRITE: / sy-vline NO-GAP,
'Hash Totals'(205),
132 sy-vline.
ULINE.
FORMAT COLOR 1 INTENSIFIED.
WRITE: / sy-vline NO-GAP,
(10) 'CoCd'(200),
(07) 'Period'(201),
sy-vline,
(16) 'Debit Amount'(202),
(16) 'Credit Amount'(203),
sy-vline,
(16) 'Total'(204).
ENDIF.
ULINE.
Sortieren der Daten *
END-OF-SELECTION.
DESCRIBE TABLE tbukrs LINES sy-tfill.
IF sy-tfill EQ 0.
CALL FUNCTION 'POPUP_NO_LIST'.
ENDIF.
SORT.
SORT tbukrs.
Belegjournal *
LOOP.
*-- Neuer Buchungskreis -
AT NEW bkpf-bukrs.
SELECT SINGLE * FROM t001 WHERE bukrs EQ bkpf-bukrs.
IF sy-subrc NE 0.
IF sy-batch EQ space.
MESSAGE a101 WITH bkpf-bukrs.
ELSE.
MESSAGE s101 WITH bkpf-bukrs.
STOP.
ENDIF.
ENDIF.
bhdgd-bukrs = bkpf-bukrs.
bhdgd-werte = bkpf-bukrs.
PERFORM new-section(rsbtchh0).
PERFORM titel_fuellen USING '5'.
ENDAT.
*-- Neuer Belegstatus -
AT NEW bkpf-bstat.
PERFORM new_page USING bkpf-bstat.
flg_color = 1.
ENDAT.
*-- Neue Belegnummer -
AT NEW bkpf-belnr.
REFRESH: t0, t1, t2, t3.
PERFORM belegkopf_merken.
mikfi-bstat = bkpf-bstat.
mikfi-bukrs = bkpf-bukrs.
mikfi-gjahr = bkpf-gjahr.
mikfi-belnr = bkpf-belnr.
bhdgd-grpin = mikfi.
ENDAT.
*-- Belegzeile -
PERFORM belegzeile_merken.
*-- Ende einer Belegnummer -
AT END OF bkpf-belnr.
PERFORM beleg_schreiben.
ULINE.
ENDAT.
*-- Ende eines Buchungskreises -
AT END OF bkpf-bukrs.
PERFORM titel_fuellen USING '4'.
PERFORM buchungskreis_schreiben USING bkpf-bukrs.
ENDAT.
ENDLOOP.
Summenblätter *
bhdgd-bukrs = ' '.
bhdgd-werte = ' '.
PERFORM new-section(rsbtchh0).
PERFORM titel_fuellen USING '4'.
PERFORM buchungskreis_schreiben USING ' '.
PERFORM hauswaehrung_schreiben.
Print Hash Totals *
flg_section = con_hash.
NEW-PAGE.
PERFORM prt_hash TABLES hash_totals.
Fehlerprotokoll *
CALL FUNCTION 'FI_MESSAGE_CHECK'
EXCEPTIONS
no_message = 4.
IF sy-subrc = 0.
IF sy-batch EQ space.
PERFORM titel_fuellen USING '6'.
NEW-PAGE.
FORMAT COLOR 6 INTENSIFIED.
CALL FUNCTION 'FI_MESSAGE_SORT'.
CALL FUNCTION 'FI_MESSAGE_PRINT'
EXPORTING
i_xskip = 'X'.
ELSE.
CALL FUNCTION 'FI_MESSAGE_GET'
TABLES
t_fimsg = tfimsg.
LOOP AT tfimsg.
MESSAGE ID tfimsg-msgid TYPE tfimsg-msgty NUMBER tfimsg-msgno
WITH tfimsg-msgv1 tfimsg-msgv2 tfimsg-msgv3 tfimsg-msgv4.
ENDLOOP.
ENDIF.
ENDIF.
U N T E R P R O G R A M M E *
0. TITEL_FUELLEN *
1. NEW_PAGE *
2. SUMME_MERKEN *
3. VORERFASSTE_STEUER_MERKEN *
4. BELEGKOPF_MERKEN *
5. BELEGZEILE_MERKEN *
6. BELEG_SCHREIBEN *
7. BUCHUNGSKREIS_SCHREIBEN *
8. HAUSWAEHRUNG_SCHREIBEN *
9. SUMMENZEILE_SCHREIBEN *
10. KONTONUMMER *
0. FORM TITEL_FUELLEN *
Ersetzt das Global &CCCU durch die Buchungskreiswährung *
F00_TEXT ist 4, 5 oder 6, je nach Gruppe der Textelemente *
FORM titel_fuellen USING f00_text.
DATA:
BEGIN OF txt_502,
T1(49) TYPE C, "CR 21709
W1(23) TYPE C, "CR 21709
t1(50) TYPE c, "CR 21709
w1(22) TYPE c, "CR 21709
t2(6) TYPE c,
w2(15) TYPE c,
t3(21) TYPE c,
w3(16) TYPE c,
t4(2) TYPE c,
END OF txt_502.
CASE f00_text. "Textelemente
WHEN '4'. "- für die Summenliste
txt_line0 = text-400.
txt_line1 = text-401.
txt_line2 = text-402.
WHEN '5'. "- für die Einzelpostenliste
txt_line0 = text-500.
txt_line1 = text-501.
txt_line2 = text-502.
IF par_hkto EQ 'X'.
txt_line1+33(10) = text-505.
txt_line2+33(10) = text-506.
ENDIF.
txt_502 = txt_line2.
REPLACE '&CCCU' WITH t001-waers INTO:
txt_502-w1, txt_502-w2, txt_502-w3.
CONDENSE:
txt_502-w1, txt_502-w2, txt_502-w3.
WRITE:
txt_502-w1 TO txt_502-w1 RIGHT-JUSTIFIED,
txt_502-w2 TO txt_502-w2 RIGHT-JUSTIFIED,
txt_502-w3 TO txt_502-w3 RIGHT-JUSTIFIED.
txt_line2 = txt_502.
WHEN '6'. "- für die Fehlerliste
txt_line0 = text-600.
txt_line1 = text-601.
txt_line2 = space.
WHEN OTHERS. "- initialisieren
txt_line0 = space.
txt_line1 = space.
txt_line2 = space.
ENDCASE.
ENDFORM. "TITEL_FUELLEN
1. FORM NEW_PAGE *
Initialisierungen für BATCH-HEADING Routine *
F01_BSTAT steuert den Aufbau des Reporttitels *
FORM new_page USING f01_bstat.
CASE f01_bstat. "Reporttitel
WHEN 'D'. "- für Dauerbuchungsurbelege
bhdgd-line1 = text-001.
WHEN 'M'. "- für Musterbelege
bhdgd-line1 = text-002.
WHEN 'S'. "- für statistische Belege
bhdgd-line1 = text-003.
WHEN OTHERS. "- für normale/vorerfaßte Belege
bhdgd-line1 = sy-title.
ENDCASE.
bhdgd-line2 = par_line.
bhdgd-inifl = 0.
NEW-PAGE.
ENDFORM. "NEW_PAGE
2. FORM SUMME_MERKEN *
Merken der Summeninformation *
FORM summe_merken.
CLEAR tbukrs.
tbukrs-bstat = bkpf-bstat.
tbukrs-bukrs = bkpf-bukrs.
tbukrs-bktxt = bkpf-bktxt.
tbukrs-gjahr = bkpf-gjahr.
tbukrs-monat = bkpf-monat.
tbukrs-dmsol = bsega-dmsol.
tbukrs-dmhab = bsega-dmhab.
IF 'DK' CA bseg-koart.
MOVE-CORRESPONDING tbukrs TO tbukrs_u.
tbukrs_u-koart = bseg-koart.
tbukrs_u-umskz = bseg-umskz.
tbukrs_u-dmsol = bsega-dmsol.
tbukrs_u-dmhab = bsega-dmhab.
COLLECT tbukrs_u.
tbukrs_u-monat = 0. "Summe für das Geschäftsjahr
COLLECT tbukrs_u.
ENDIF.
COLLECT tbukrs.
ENDFORM. "SUMME_MERKEN
3. FORM VORERFASSTE_STEUER_MERKEN *
Nachlesen der Steuerzeilen vorerfaßter Belege *
Gefüllt wird TBUKRS und der Extrakt *
FORM vorerfasste_steuer_merken.
CHECK hlp_bstat EQ 'V'.
SELECT * FROM vbset
WHERE ausbk EQ bkpf-bukrs
AND belnr EQ bkpf-belnr
AND gjahr EQ bkpf-gjahr.
CHECK vbset-hwste NE 0.
CLEAR: bseg, bsega.
bseg-koart = 'S'.
bseg-mwart = 'V'. "oder 'A', nur zum Füllen von T2
bseg-mwskz = vbset-mwskz.
IF vbset-shkzg EQ 'S'.
bsega-dmsol = vbset-hwste.
bsega-dmshb = vbset-hwste.
ELSE.
bsega-dmhab = vbset-hwste.
bsega-dmshb = - vbset-hwste.
ENDIF.
IF par_summ EQ space.
EXTRACT daten.
ENDIF.
PERFORM summe_merken.
ENDSELECT.
ENDFORM. "VORERFASSTE_STEUER_MERKEN
4. FORM BELEGKOPF_MERKEN *
Je Beleg werden gefüllt: *
T0 - Informationsflag *
FORM belegkopf_merken.
t0-info = 0. "Belegkopf
APPEND t0.
CASE hlp_bstat.
WHEN 'A'.
t0-info = 6. "Ausgleichsbeleg
APPEND t0.
WHEN 'B'.
t0-info = 7. "zurückgen. Ausgleichsbeleg
APPEND t0.
WHEN 'V'.
t0-info = 1. "vorerfaßter Beleg
APPEND t0.
WHEN 'W'.
t0-info = 5. "ersetzter vorerfaßter Beleg
APPEND t0.
WHEN 'Z'.
t0-info = 4. "gelöschter vorerfaßter Beleg
APPEND t0.
ENDCASE.
IF bkpf-xblnr NE space AND hlp_bstat NA 'BWZ'.
t0-info = 2. "Referenz
APPEND t0.
ENDIF.
IF bkpf-stblg NE space.
t0-info = 3. "Storno
APPEND t0.
ENDIF.
SORT t0.
ENDFORM. "BELEGKOPF_MERKEN
5. FORM BELEGZEILE_MERKEN *
Je Beleg werden gefüllt: *
T1 - Personenkonteninformation *
T2 - Steuerinformation (nicht bei vorerfaßten Belegen) *
T3 - Sachkonteninformation *
FORM belegzeile_merken.
Vendors/ Customers
IF bseg-koart CA 'DK'.
t1-koart = bseg-koart.
IF par_hkto EQ 'X'.
t1-ktonr = bseg-hkont.
ELSEIF bseg-koart EQ 'K'.
t1-ktonr = bseg-lifnr.
ELSE.
t1-ktonr = bseg-kunnr.
ENDIF.
t1-bschl = bseg-bschl.
t1-umskz = bseg-umskz.
t1-xnegp = bseg-xnegp.
t1-zlspr = bseg-zlspr. "CR 21709
t1-dmshb = bsega-dmshb.
t1-wrshb = bsega-wrshb.
t1-xfwae = space.
APPEND t1.
Read the vendor description.
IF bseg-koart = con_vendor.
flg_vendr2 = con_true.
flg_vendr3 = con_true.
CLEAR lfa1-name1.
SELECT SINGLE name1
INTO lfa1-name1
FROM lfa1
WHERE lifnr = bseg-lifnr.
ELSEIF bseg-koart = con_cust.
CLEAR kna1-name1.
SELECT SINGLE name1
INTO kna1-name1
FROM kna1
WHERE kunnr = bseg-kunnr.
ENDIF.
IF bkpf-waers EQ t001-waers.
CLEAR t1.
ENDIF.
t1-xfwae = 'X'.
t1-name1 = lfa1-name1.
IF t1-name1 IS INITIAL.
t1-name1 = kna1-name1.
ENDIF.
APPEND t1.
CLEAR:
kna1-name1,
lfa1-name1.
CLEAR t1.
Save the hash total amounts
CLEAR tcurx-currdec.
SELECT SINGLE currdec
INTO tcurx-currdec
FROM tcurx
WHERE currkey = bkpf-waers.
IF tcurx-currdec = 1.
factor = 10.
ELSE.
factor = 100.
ENDIF.
CLEAR hash_totals.
hash_totals-bukrs = bkpf-bukrs.
CONCATENATE bkpf-monat '/' bkpf-gjahr INTO hash_totals-poper.
IF bsega-wrshb < 0.
hash_totals-cramt = bsega-wrshb * factor.
ELSE.
hash_totals-dramt = bsega-wrshb * factor.
ENDIF.
COLLECT hash_totals.
Tax accounts
ELSEIF bseg-mwart CA 'AV'.
t2-mwskz = bseg-mwskz.
t2-dmshb = bsega-dmshb.
APPEND t2.
IF flg_vendr2 = con_true.
flg_vendr2 = con_false.
CLEAR t2.
APPEND t2.
ENDIF.
GL Accounts
ELSEIF hlp_bstat NA 'ABWZ'.
t3-mwskz = bseg-mwskz.
t3-bschl = bseg-bschl.
t3-xnegp = bseg-xnegp.
t3-koart = bseg-koart.
t3-hkont = bseg-hkont.
t3-dmshb = bsega-dmshb.
APPEND t3.
IF flg_vendr3 = con_true
OR NOT bseg-kostl IS INITIAL
OR NOT bseg-prctr IS INITIAL.
flg_vendr3 = con_false.
CLEAR t3.
t3-kostl = bseg-kostl.
t3-prctr = bseg-prctr.
APPEND t3.
CLEAR t3.
ENDIF.
ENDIF.
ENDFORM. "BELEGZEILE_MERKEN
6. FORM BELEG_SCHREIBEN *
Ausgabe der Belginformationen *
FORM beleg_schreiben.
DATA:
len TYPE i.
Berechnung der benötigten Zeilen pro Beleg
DESCRIBE TABLE:
t0 LINES cnt_t0,
t1 LINES cnt_t1,
t2 LINES cnt_t2,
t3 LINES cnt_t3.
cnt_max = cnt_t0.
IF cnt_max LT cnt_t1.
cnt_max = cnt_t1.
ENDIF.
IF cnt_max LT cnt_t2.
cnt_max = cnt_t2.
ENDIF.
IF cnt_max LT cnt_t3.
cnt_max = cnt_t3.
ENDIF.
ADD 1 TO cnt_max.
IF cnt_max LE 10.
RESERVE cnt_max LINES.
ELSE.
RESERVE 5 LINES.
ENDIF.
SUBTRACT 1 FROM cnt_max.
Farbe setzen
IF flg_color EQ 0.
FORMAT COLOR 2 INTENSIFIED OFF.
flg_color = 1.
ELSE.
FORMAT COLOR 2 INTENSIFIED.
flg_color = 0.
ENDIF.
Index fuer optische Archivierung
PERFORM new-group(rsbtchh0).
DO cnt_max TIMES.
Belegkopfinformationen
WRITE /1 sy-vline NO-GAP.
IF sy-index LE cnt_t0.
READ TABLE t0 INDEX sy-index.
CASE t0-info.
WHEN 0. "Belegkopf
hlp_belnr = bkpf-belnr. "Belegnr. mit führenden Nullen
Referenz auf Originalbeleg
PERFORM start_doc_reference(rsbtchh0)
USING bkpf-bukrs bkpf-belnr bkpf-gjahr bkpf-bktxt. " change*
WRITE:
bkpf-bukrs,
hlp_belnr,
bkpf-blart,
bkpf-budat DD/MM/YYYY.
Ende der Referenz auf Originalbeleg
PERFORM end_doc_reference(rsbtchh0).
WHEN 1. "Vorerfaßter Beleg
WRITE:
(29) text-507.
WHEN 2. "Referenz
WRITE:
(12) text-503,
bkpf-xblnr.
WHEN 3. "Storno
WRITE:
(12) text-504,
bkpf-stblg.
WHEN 4. "Gelöschter vorerfaßter Beleg
WRITE:
(29) text-507,
(40) text-508.
WHEN 5. "Ersetzter vorerfaßter Beleg
txt_line = text-509.
REPLACE:
'&BLN' WITH bkpf-xblnr(10) INTO txt_line,
'&GJR' WITH bkpf-xblnr+10 INTO txt_line.
WRITE:
(29) text-507,
(40) txt_line.
WHEN 6. "Ausgleichsbeleg
WRITE: "
(29) text-510. "
WHEN 7. "zurückgen. Ausgleichsbeleg
WRITE: "
(29) text-511. "
ENDCASE.
ENDIF.
Personenkonteninformationen
Subledger Account Information
WRITE 31(1) sy-vline NO-GAP.
Internal tables T0 - T5 hold data for each section.
IF sy-index LE cnt_t1.
READ TABLE t1 INDEX sy-index.
IF par_hkto EQ 'X'.
PERFORM kontonummer USING t1-ktonr hlp_sakan.
ELSE.
hlp_sakan = t1-ktonr.
ENDIF.
IF t1-xfwae EQ space.
IF t1-xnegp = 'X'.
t1-xnegp = '-'.
ENDIF.
Write the vendor number.
WRITE: t1-koart,
hlp_sakan,
t1-bschl NO-GAP.
IF t1-umskz IS INITIAL.
WRITE: t1-xnegp NO-GAP,
t1-umskz.
ELSE.
WRITE: t1-umskz NO-GAP,
t1-xnegp.
ENDIF.
WRITE: t1-zlspr. "CR 21709 / 23588
WRITE: (22) t1-dmshb CURRENCY t001-waers.
ELSE.
Write the document currency, amount and the
vendor/ customerHi,
Please see documentation of enhancement MM06E005 (transaction SMOD).
Userexit EXIT_SAPMM06E_016 is a component of enhancement MM06E005.
With that enhancement, you can
- Maintain/supply your own customer fields
- Update your own customer-specific tables
You cannot:
- Change standard fields
- Change data that depends on the document header in the items
- Change data that depends on an item in the document header
Please have a look at Business Add-In (BAdI) ME_PROCESS_PO_CUST.
Regards,
Edit -
Is it possible to display only dynamically selected fields in the out put?
Is it possible to display only dynamically selected fields in the out put? i need to display set of columns in the selection criteria, but in the output i have display only input given fields. because i need to convert it into .csv file. So i have to display selected fields from internal table. In oracle they are using"execute immediate". is there any equivalent in SAP?
thanks in advance.Hi Remya,
Are you talking about dynamic programming in ABAP ?
If yes, there are concepts like RTTS which facilitates it.
Yes, the select query also supports dynamic selection of fields. ( Please care about ( ) in dynamic sql ).
Do more research on Field Symbols and statements like ASSIGN COMPONENT OF.
Regards,
Philip. -
Need to know the column names in my dynamic select clause
Dear All,
Please go through the following code. While executing the following code i am getting an error saying that dbms_sql.describe_columns overflow, col_name_len=35. Use describe_columns2.
Please guide me how to proceed further. Or please help me, how can i get the column names when i issue a dynamic select clause.
DECLARE
CUR INTEGER;
COL_CNT INTEGER ;
A INTEGER;
SEL_CLAUSE VARCHAR2(2000);
DESC_T DBMS_SQL.DESC_TAB;
REC DBMS_SQL.DESC_REC;
b number;
BEGIN
SEL_CLAUSE := 'SELECT 1,2,DECODE(1,1,''ONE'',2,''TWO'',3,''THREE'') FROM DUAL';
--'SELECT ROWID,PARA_SUB_CODE,DECODE('||''''||'ENG'||''''||','||''''||'ENG'||''''||',PARA_NAME,PARA_BL_NAME),NULL,NULL FROM PCOM_APP_PARAMETER';
--'SELECT 1,2,DECODE(1,1,''ONE'',2,''TWO'') FROM DUAL';
DBMS_OUTPUT.PUT_LINE( SEL_CLAUSE );
CUR := DBMS_SQL.OPEN_CURSOR;
DBMS_SQL.PARSE(CUR,SEL_CLAUSE,DBMS_SQL.NATIVE);
DBMS_SQL.DESCRIBE_COLUMNS(CUR,COL_CNT,DESC_T);
B := desc_t.first;
FOR J IN 1..COL_CNT
LOOP
DBMS_OUTPUT.PUT_LINE('J := '||J || ' COL CNT ' || COL_CNT);
END LOOP;
BEGIN
A := DBMS_SQL.EXECUTE(CUR);
EXCEPTION
WHEN OTHERS THEN
NULL;
END;
END;
Regards,
BalajiIs there any way can i have it directly??It does not work with static SQL either. Dynamic SQL is no different.
SQL> select 1 x from dual where x = 1 ;
select 1 x from dual where x = 1
ERROR at line 1:
ORA-00904: "X": invalid identifier
SQL>As suggested already, you will need to use alias if you want your select expression to be referred in the where clause.
SQL> BEGIN
2 FOR rec IN (SELECT *
3 FROM (SELECT 1,
4 2,
5 DECODE(1, 1, 'ONE', 2, 'TWO', 3, 'THREE') "DECODE(1, 1, 'ONE', 2, 'TWO', "
6 FROM DUAL)
7 WHERE "DECODE(1, 1, 'ONE', 2, 'TWO', " = 'ONE')
8 LOOP
9 NULL;
10 END LOOP;
11 END;
12 /
PL/SQL procedure successfully completed.
SQL>Message was edited by:
Kamal Kishore -
Dynamic Selection on report not working
Dear all,
I have several reports on which the dynamic selection is not working. For instance, the report CN43N. The report is outputting all data in a year i.e it is disregarding the condition I specified in the dynamic selection fields.
Is there some configuration to make to this report so that the dynamic selection works?
Thanks for ur help.
NasAlso Nelmaz,
I have just checked OSS notes and found below note helpful to you:
Note 1059465 - CN43N: Dynamic selections for scheduling data of WBS elemnts
Symptom
You cannot use transaction CN43N to create dynamic selections for scheduling data of WBS elements (table PRTE). You can use transaction CNS43 to do so.
Hope this helps.
Please assign points as way to say thanks -
How to deal with dynamic selection screen elements when macros are used?
Hello experts,
This is regarding the dynamic selection screen elements. Actually the requirement is to modify the existing standard report program RFUMSV00 by copying it into a Z report, adding a few selection screen elements and new fields in the output. I actually did everything required except for the one thing that is going out of my reach.
There are a certain fields which are coming when they are not supposed to get displayed. I don't understand the code because of its obsoleteness. Neither can I debug it because it is just data declaration.
This is the code where there is a fault. If I copy the entire code into a new Z report, I'm getting new fields like Entry Date, Document Type, Reference Transaction, Reference key, Logical system.
DEFINE selection_screen_line.
selection-screen: begin of line.
parameters &3 like &4 default 'X' modif id mc4.
selection-screen: comment (30) &1 for field &3 modif id mc4.
selection-screen: comment pos_low(10) text-019
for field &2 modif id mc4. "neu
parameters &2 like rfums_alv-variante modif id mc4.
selection-screen:
position pos_high.
selection-screen: pushbutton (15) text-028
user-command &5 modif id mc4.
selection-screen end of line.
END-OF-DEFINITION.
Kindly, suggest me the right solution.In the program attributes ( SE38 > RFUMSV00 > GOTO > Properties ), you will find a logical database BRF declared. The include DBBRFSEL is part of the selection screen of this logical database.
The selection screen is actually the selection screen of this logical database.
Under the Logical Database field, there is a Selection screen field where you can input which selection screen of the logical database to be used.
But, this is just to change the selection screen that is displayed. To completely suppress it you need to remove logical database declaration from the properties of the program and call it inside your program through function module.
You cannot just remove it from the declaration because many of its variables are used in the program.
So call it using function module as the first step in INITIALIZATION section of the program.
The syntax and function module to call it in your program can be found in the following thread :
How to hide the selection screen of a Logical datebase?
Regards,
Ashish
Maybe you are looking for
-
Can't print from Mail since upgrading to Mavericks
My most recent crash log from Mail - I can save emails as PDF then print but not ideal - any ideas what's causing it? Process: Mail [246] Path: /Applications/Mail.app/Contents/MacOS/Mail Identifier: com.apple.mail Version:
-
Trouble compiling package with JDK 1.4
Hi, I just installed JDK 1.4 on a new machine, now I have trouble running compile scripts that used to work on my old machine. The old an new are configured with Win 2000. The following compiles without problem: javac -classpath "..." -d "..." "c:\..
-
Is there any difference in SAP 4.7 and ECC 5.0
Dear, Is there any difference in SAP 4.7 and ECC 5.0... Thanx & Regards, Mohammad Nabi
-
Easy Install Android SDK via Dreamweaver CS5.5 Configure Application Framework
I have been trying to download Android SDK using Configure Application Framework from Site >> Mobile Applications but get the following error message everytime I try: After clicking on "Easy Install..." button: According to several tutorials availabl
-
I tried to use the Mail Stationery to send a mail to a relative. All those templates look great but... I typed more text than possible and the template just gives me this sound that there are no more actions to do. That is annoying if you can only ty