Reg: Enable Save option in creating new Webi

Hi Gurus.
I am not able to save a new Webi Document.
The " SAVE" , "PRINT" are not highlighted...
Please let me know where can I modify those options...?
Regards
Lakshman

the save and pring will not be highlighted when you are in the edit query mode
just run the report for the first time, or click "Edit Report",, you will get then highlighted and you can save the report.
if this is not the case, then you dont have an access right to save Webi Reports, ask your administrator to give you this access
good luck

Similar Messages

  • Option to Create new Security Policy in UME is not available

    Hello,
    We are on NW CE 7.1 EHP1 and MII 12.1.7 build 47.
    I have "Administrator" role, "MII Super Administrator" role, few custom roles and I also ensured that "Administrator" role has Action "Manage_All" and I am able to perform all of the activities on UME except that I don't see any option to create new security policies, all I can do is modify the Default Security Policy and save it.
    It never shows me an option to create new security policy and I am not sure what roles or actions I am missing.
    I need have different security polices for different users based on their roles.
    1) Are there any roles or actions that my profile needs to have?
    2) Is it something to do with NW CE version?
    3) Has something gone wrong or have we missed some configuration while installing NW CE?
    I had posted similar question in MII forum but was recommended to post in NW forums.
    So any suggestions will be of great help
    Thanks,
    Adarsh

    what is Security Policy ?

  • No option for creating new portal or portlet in BEA workspace

    hi, i download workshop102_win32.exe from oracle site and installed the software properly.but after Creating a Workspace i didn't find any option for creating portal web project in the "File-->New-->project".
    Their is also no option for creating any portal or portlet also.
    so i think i didn't install a propery software for portal development or i need to install any other extra plugins for portal development in BEA weblogic.
    So, friends please suggest me where i will find the proper software for weblogic portal development.
    I expect your prompt reply, any help will be very appreciated.
    Thank you in advance.
    Best Regards
    Edited by: user538424 on Jun 2, 2009 9:26 AM

    1. To have better luck on questions about WebLogic Portal, you may want to post your question in the [WebLogic Portal Forum |http://forums.oracle.com/forums/forum.jspa?forumID=573].
    2. are you following any documentation or demo or tutorial/ white paper which asked you to download what you downloaded?
    3. About your question, what you installed seems like the Development Tool for WebLogic.
    For the WebLogic Portal Software, you may want to go to the following page and click the last link in the User Interaction category.
    http://www.oracle.com/technology/software/products/ias/bea_main.html
    That link is for Oracle WebLogic Portal 10.3 and gives you the file portal103_win32.zip.
    hope that helps!
    AMN

  • HT2476 Why when clicking the right mouse button for my external hard drive there is no option for "create new folder"?

    Hi there. I'm having a problem with my external hard drive. Actually with only one of them (others seem to be ok...). The problem is that when clicking the right mouse button (or using other ways to do the same), in the drop-down list there isn't an option for "create new folder". Please, can anyone help with this issue?

    The drive is NTFS formated. Most probably that's the reason, but there is some info on the drive which I wouldn't like to loose. If there is a way to re-format the drive and save the files, that would be great. If there isn't such a way, then please, tell me how to re-format it. But bear in mind as well that I'm using Parellels and the drive is to be used in Mac and Win modes, both. Just to add some more info: my other drive is FAT32 formated and all seems to go well with it.

  • Error in Creating New Web Application SharePoint 2013

    Everything was working fine but today when i try to create  a new web application i am getting the following error.It's happening whenever i am trying to create a new web application.
    The directory C:\inetpub\wwwroot\wss\VirtualDirectories\26060 is already being used by another IIS Web Site.  Choose a different root directory for your new Web application. 
    But this port 26060 was not being used before and if i try to create new web application again then the error message occurs with the port number of the new web application. 
    Please help.

    Hi HelloFragrance,
    Are you using a host header when creating these web apps? If so have you tried creating without a host header? Also are you logged in with the Server with the Admin account? Check this out: (taken from Jeremy Taylor's
    blog)
    " 1. Ensure you have a proper dns name / entry in the hosts file of your server for the new url you are wanting to create.
    2. Ensure you have typed in the ‘host header’ typed in when creating the new web application.
    3. If this doesnt work, open IIS Manager – Start>run> inetmgr> and verify the home directory – it could be located on a different drive."
    Also have you tried creating through Powershell and see if you run into the same issue or not?
    http://technet.microsoft.com/en-us/library/ff607931(v=office.15).aspx
    Hope this helps!
    Thanks!
    BlueSky2010
    Please help and appreciate others by using forum features: "Propose As Answer", "Vote As Helpful" and
    "Mark As Answer"

  • Runtime error and unable to create new web application

    Hi
    when i create new web application i faced this error Runtime error and unable to create new web application.
    in this farm we have
    2 wfe servers
    2 application servers.
    adil

    Adil,
    There could be many reason like IIS issue, Space issue, Permission issue, SQL issue which is not possible us to guess rather
    you need to jump in the SharePoint log(Program Files\Common files\Microsoft Shared\Web Server Extensions\14\LOGS) and find out the specific error log its throwing after which trouble shoot can be start.
    You can refer few similar threads here -
    Link
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • IPhoto- no option to "create new library"

    Hi all
    When I try to import new photos into iPhoto I get the message that there is not enough space in my library to allow it.  I have searched for this issue alone on these message boards and have seen I need to check my memory (I have over 90gb free) and then to try "create new library" when opening with command and alt button, to see if there's any concerns in doing that.
    My issue is that I don't have the option to "create new library." it is not there at all.  I have already tried rebuilding it from this option but I still get the not enough memory warning.
    Can anyone advise?
    Thanks

    To create a new Library you hold the option (or alt) key when launching, not the command and alt keys
    However, ths message is bogus -  after all you have 90 gigs free - and usually implies a damaged database.
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • I cant create new web-site

    hello,
    i downloaded some iWeb templates and installed them. they work so far.
    but since i added those templates i cant do several things:
    -i cant create a blank web-site
    -i cant create any web-site with my other user accounts
    i got 3 users on my mbp. only 1 user allows me to create new web-sites. if i log in with another user (i also tried to create a new user) then i only get a grey + in the lower left corner of my iWeb. grey means i cant click it.
    i deleted iweb preferences already. what else can i do to solve that?
    is it a good idea to delete iweb from aplication folder and install it again? is there a full installer?
    thx 4 any help, ichi

    Can you do this in some user accounts and not others, as the case for the original poster, or is this a problem across the board?
    If all the controls are greyed out, the easiest potential fix is to open iPhoto, select some pictures/and or an album there and click on the iWeb button at the bottom of the iPhoto window. This should "force" iWeb to create a photo page.
    It that doesn't work, you will need to try to download one of the iWeb upgrades. Which version of iWeb are you using?

  • Can't create new Web Intelligence documents

    Hello,
    Only user Administrator can create new Web Intelligence documents on Infoview at my Installation.  I 've created a new group called GROUP1. This group has  Full Control acces level on folders, universes and conections like group Administrators. A user from group GROUP1 can't create new document Web Intellingence. Also, when I have joined this user to Administrators group, then this user was allowed to create a new Web Intellingence document.
    Could anybody help me?
    Thank you in advance,
    Jaume

    please check the rights for GROUP at application level.
    I thinck you are not are not grated the rights for the Group 1 for teh Webintelligence applicaton,

  • Can we Create new Web Component in OAF LIb?

    Dear all,
    1) Can we create a new WEB Component in OAF?
    2)Can we call any Flash Based Application in OAF?
    3)Can we create any Pie Chart where each Part should be have has a link(Ex:In Pie chart If we have 5 Parts when I click on any part of Pie chart It chould navigate to Other Page)?

    Hi,
    This is what i have found. This might really help you.
    Adding Components to the OA Extension
    The OA Extension provides design time support for any additional components included as extensions to the OA Framework (Fwk) by product groups in Apps, as well as Fwk plug-in support at runtime.
    The Preferences | Oracle Applications | OA Component Manager page provides a generic mechanism for any product group to enable and disable additional components.
    To enable or disable the loading of a specific component extension: From the main menu, choose Tools | Preferences. Expand the Oracle Applications node and select OA Component Manager. The OA Component Manager page displays an entry for each component extension installed in the jdev/lib/ext/jrad/ext folder.
    By default, any new extension jar file installed by the OA Extension is initially disabled. Select or deselect components in the list. For more information on these options, press F1 or click Help from within the page. When finished, click OK. You must restart JDeveloper to enable a new extension. The enable/disable state of an extension will be saved in the settings.xml file in your system directory.
    Regards,
    Gyan

  • BO 4.0: cannot create new WebI document as admin

    Hi,
    I am logged in on our BO 4.0 server as administrator and would like to create a sample WebI report. So I started WebI from the Launchpad but the "create new document" icon is inactive...
    I do have full access and I am using the administrator login... what's missing?
    Thanks!

    Hi Steve,
    Have you tried from another client/browser computer using the same account?
    How about using the rich client? Can you create documents and save them to the repository?
    Regards,
    Julian

  • Can't create new Web Intelligence document

    My company is migrating server from BO 5.1.8 to BOXI R2. Migration was fine with the exception of a few issues.
    FIrst, no one has the ability to create a new Web Intelligence document in InfoView, not even administrator although permissions are there for Web Intelligence under the BusinessObjects Enterprise Applications on the main screen of the CMC.
    Second, when a user attempts to change the parameters for a report, by clicking on the "prompts" link, they are presented with a server error mentioning that the document cannot be opened since it was saved with "Write Reservation Password". Would this password need to be removed in BO 5.1.8 and then the migration redone or can this password be removed post migration?
    I appreciate any help or advice. I have three other things I am working on and need to get these things resolved.
    thanks

    heinkonijn,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • Hyper V: No Option to Create New Virtual Machine

    After selecting my local computer as the virtualization server, there is no option to create a new virtual machine. When I right-click on my server, I only get "Remove Server", "View>", and "Help"
    in the drop-down menu. According to the tutorials that I've watched, this is where "New>Virtual Machine..." should appear. What am I doing wrong?
    My machine:
    Win 8.1 Pro, 64-bit
    Intel Core i5-3470
    RAM 8192
    Graphics: GTX 660

    You need to enable Virtualization under CPU / Advance settings in your BIOS.  Your motherboard must support hardware virtualization in order for this feature to be available in the BIOS. If you don't see this option then, your hardware (motherboard)
    is not compatible nor support.
    Have a look at this http://www.techrepublic.com/blog/windows-and-office/get-started-with-windows-8-client-hyper-v-the-right-way/

  • Creating new webi or universe functions

    A number of functions in excel do not exist in BO, seeking if anyone is aware of a method to create new functions?
    thanks in advance

    try webi extension points
    this doc will help you : http://help.sap.com/businessobject/product_guides/boexir31SP2/en/xi31_sp2_webi_calc_ext_en.pdf

  • No option to create new workspace in JDeveloper; turning BPEL Designer "on"

    I'm trying to do some BPEL work on Linux, using JDeveloper Studio 10.1.3.4.
    A couple of issues:
    1) although the BPEL Designer shows up as a component in the "About", and BPEL Process Modeler shows up as a loaded extension in the same place, BPEL Process Project is a grayed-out option in New Projects. This may simply be due to the fact that BPEL Designer apparently needs to be turned "on", and I've yet to figure out how to do that on Linux (since the documentation is mostly for Windows).
    So if this problem is solved by turning the JDeveloper BPEL Designer "on", I sure wouldn't mind knowing how to do it on Linux. It's easy enough to start the BPEL Process Manager - I have that running right now - but I see no shell script anywhere in the SOA Suite installation that remotely looks like it might start BPEL Designer.
    2) Many of the tutorials say that one should create a workspace in JDeveloper. According to them this is available as an option under File > New. Well, in Linux JDeveloper Studio 10.1.3.4 it's not available at all. It doesn't even exist as a disabled option. I find this curious, and somewhat disturbing.
    Any ideas as to why something so central doesn't show up?
    Regards,
    Arved

    OK, good to know, John. Eventually a person figures it out one way or the other. I realize all of this stuff exists in documentation someplace, but there's only so many hours in the day. And if you're using JDeveloper 10.1.3, with JDeveloper 11 already available, you don't necessarily expect a lot of the articles you run across to be so old that they still refer to workspaces. I'm not saying that these are necessarily Oracle articles.
    As an aside I've found Oracle documentation to be pretty good. I use Oracle software on Windows, Mac OS X and Linux. For ESB and BPEL on Linux the main problem with the docs is that they are incomplete. It's disconcerting to see continual references to having to turn BPEL Designer on, in Windows, and have no instructions concerning that for Linux, as one example. As it happens, doing a "startall" for opmnctl does everything I need, so if there's a separate BPEL Designer started up by that (as opposed to the BPEL Process Manager) I guess that's where it gets fired up. That may also be covered in documentation someplace, for Linux, but I haven't found it.
    Arved

Maybe you are looking for